diff options
Diffstat (limited to 'c++/src/Makefile.in')
-rw-r--r-- | c++/src/Makefile.in | 1740 |
1 files changed, 1740 insertions, 0 deletions
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in new file mode 100644 index 0000000..f328021 --- /dev/null +++ b/c++/src/Makefile.in @@ -0,0 +1,1740 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://www.hdfgroup.org/licenses. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# HDF5-C++ Makefile(.in) +# + + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +TESTS = +subdir = c++/src +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ + $(top_srcdir)/m4/aclocal_fc.m4 \ + $(top_srcdir)/m4/ax_check_class.m4 \ + $(top_srcdir)/m4/ax_check_classpath.m4 \ + $(top_srcdir)/m4/ax_check_java_home.m4 \ + $(top_srcdir)/m4/ax_check_junit.m4 \ + $(top_srcdir)/m4/ax_java_options.m4 \ + $(top_srcdir)/m4/ax_jni_include_dir.m4 \ + $(top_srcdir)/m4/ax_prog_doxygen.m4 \ + $(top_srcdir)/m4/ax_prog_jar.m4 \ + $(top_srcdir)/m4/ax_prog_java.m4 \ + $(top_srcdir)/m4/ax_prog_java_works.m4 \ + $(top_srcdir)/m4/ax_prog_javac.m4 \ + $(top_srcdir)/m4/ax_prog_javac_works.m4 \ + $(top_srcdir)/m4/ax_prog_javadoc.m4 \ + $(top_srcdir)/m4/ax_try_compile_java.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(include_HEADERS) \ + $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc +CONFIG_CLEAN_FILES = h5c++ +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libhdf5_cpp_la_DEPENDENCIES = $(LIBHDF5) +am_libhdf5_cpp_la_OBJECTS = H5Exception.lo H5IdComponent.lo \ + H5DataSpace.lo H5PropList.lo H5Library.lo H5FaccProp.lo \ + H5FcreatProp.lo H5LcreatProp.lo H5LaccProp.lo H5DaccProp.lo \ + H5DxferProp.lo H5DcreatProp.lo H5Location.lo H5AbstractDs.lo \ + H5Attribute.lo H5Object.lo H5OcreatProp.lo H5DataType.lo \ + H5AtomType.lo H5PredType.lo H5EnumType.lo H5IntType.lo \ + H5FloatType.lo H5StrType.lo H5ArrayType.lo H5VarLenType.lo \ + H5CompType.lo H5DataSet.lo H5CommonFG.lo H5Group.lo H5File.lo +libhdf5_cpp_la_OBJECTS = $(am_libhdf5_cpp_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libhdf5_cpp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \ + $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \ + $(AM_CXXFLAGS) $(CXXFLAGS) $(libhdf5_cpp_la_LDFLAGS) \ + $(LDFLAGS) -o $@ +SCRIPTS = $(bin_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src +depcomp = $(SHELL) $(top_srcdir)/bin/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CXXFLAGS) $(CXXFLAGS) +AM_V_CXX = $(am__v_CXX_@AM_V@) +am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) +am__v_CXX_0 = @echo " CXX " $@; +am__v_CXX_1 = +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) +am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) +am__v_CXXLD_0 = @echo " CXXLD " $@; +am__v_CXXLD_1 = +SOURCES = $(libhdf5_cpp_la_SOURCES) +DIST_SOURCES = $(libhdf5_cpp_la_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +HEADERS = $(include_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red='[0;31m'; \ + grn='[0;32m'; \ + lgn='[1;32m'; \ + blu='[1;34m'; \ + mgn='[0;35m'; \ + brg='[1m'; \ + std='[m'; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.sh.log=.log) +SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver +SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/h5c++.in \ + $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \ + $(top_srcdir)/config/commence.am \ + $(top_srcdir)/config/conclude.am \ + $(top_srcdir)/config/lt_vers.am +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ + +# H5_CFLAGS holds flags that should be used when building hdf5, +# but which should not be exported to h5cc for building other programs. +# AM_CFLAGS is an automake construct which should be used by Makefiles +# instead of CFLAGS, as CFLAGS is reserved solely for the user to define. +# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. +AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ + +# Include src directory +AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src +AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ +AM_JAVACFLAGS = @AM_JAVACFLAGS@ +AM_JAVAFLAGS = @AM_JAVAFLAGS@ +AM_JNIFLAGS = @AM_JNIFLAGS@ +AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ +AR = @AR@ +AR_FLAGS = @AR_FLAGS@ +ASSERTS = @ASSERTS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_MODE = @BUILD_MODE@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_VERSION = @CC_VERSION@ +CFLAGS = @CFLAGS@ +CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@ +CODESTACK = @CODESTACK@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CXX_VERSION = @CXX_VERSION@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ +DESIRED_FILE_LOCKING = @DESIRED_FILE_LOCKING@ +DIAGS = @DIAGS@ +DIRECT_VFD = @DIRECT_VFD@ +DLLTOOL = @DLLTOOL@ +DOXYGEN_EXAMPLES_DIRECTORY = @DOXYGEN_EXAMPLES_DIRECTORY@ +DOXYGEN_EXTERNAL_SEARCH = @DOXYGEN_EXTERNAL_SEARCH@ +DOXYGEN_HTML_EXTRA_FILES = @DOXYGEN_HTML_EXTRA_FILES@ +DOXYGEN_HTML_EXTRA_STYLESHEET = @DOXYGEN_HTML_EXTRA_STYLESHEET@ +DOXYGEN_HTML_FOOTER = @DOXYGEN_HTML_FOOTER@ +DOXYGEN_HTML_HEADER = @DOXYGEN_HTML_HEADER@ +DOXYGEN_INCLUDE_ALIASES = @DOXYGEN_INCLUDE_ALIASES@ +DOXYGEN_INPUT_DIRECTORY = @DOXYGEN_INPUT_DIRECTORY@ +DOXYGEN_LAYOUT_FILE = @DOXYGEN_LAYOUT_FILE@ +DOXYGEN_MACRO_EXPANSION = @DOXYGEN_MACRO_EXPANSION@ +DOXYGEN_OPTIMIZE_OUTPUT_FOR_C = @DOXYGEN_OPTIMIZE_OUTPUT_FOR_C@ +DOXYGEN_OUTPUT_DIRECTORY = @DOXYGEN_OUTPUT_DIRECTORY@ +DOXYGEN_PACKAGE = @DOXYGEN_PACKAGE@ +DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ +DOXYGEN_PROJECT_BRIEF = @DOXYGEN_PROJECT_BRIEF@ +DOXYGEN_PROJECT_LOGO = @DOXYGEN_PROJECT_LOGO@ +DOXYGEN_SEARCHENGINE_URL = @DOXYGEN_SEARCHENGINE_URL@ +DOXYGEN_SERVER_BASED_SEARCH = @DOXYGEN_SERVER_BASED_SEARCH@ +DOXYGEN_VERSION_STRING = @DOXYGEN_VERSION_STRING@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +DX_CONFIG = @DX_CONFIG@ +DX_DOCDIR = @DX_DOCDIR@ +DX_DOT = @DX_DOT@ +DX_DOXYGEN = @DX_DOXYGEN@ +DX_DVIPS = @DX_DVIPS@ +DX_EGREP = @DX_EGREP@ +DX_ENV = @DX_ENV@ +DX_FLAG_chi = @DX_FLAG_chi@ +DX_FLAG_chm = @DX_FLAG_chm@ +DX_FLAG_doc = @DX_FLAG_doc@ +DX_FLAG_dot = @DX_FLAG_dot@ +DX_FLAG_html = @DX_FLAG_html@ +DX_FLAG_man = @DX_FLAG_man@ +DX_FLAG_pdf = @DX_FLAG_pdf@ +DX_FLAG_ps = @DX_FLAG_ps@ +DX_FLAG_rtf = @DX_FLAG_rtf@ +DX_FLAG_xml = @DX_FLAG_xml@ +DX_HHC = @DX_HHC@ +DX_LATEX = @DX_LATEX@ +DX_MAKEINDEX = @DX_MAKEINDEX@ +DX_PDFLATEX = @DX_PDFLATEX@ +DX_PERL = @DX_PERL@ +DX_PROJECT = @DX_PROJECT@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ +F9XMODFLAG = @F9XMODFLAG@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FCFLAGS = @FCFLAGS@ +FCFLAGS_f90 = @FCFLAGS_f90@ +FCLIBS = @FCLIBS@ +FC_VERSION = @FC_VERSION@ +FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +Fortran_COMPILER_ID = @Fortran_COMPILER_ID@ +GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ +H5_CFLAGS = @H5_CFLAGS@ +H5_CLASSPATH = @H5_CLASSPATH@ +H5_CPPFLAGS = @H5_CPPFLAGS@ +H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_FCFLAGS = @H5_FCFLAGS@ +H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ +H5_IS_DARWIN = @H5_IS_DARWIN@ +H5_JAVACFLAGS = @H5_JAVACFLAGS@ +H5_JAVAFLAGS = @H5_JAVAFLAGS@ +H5_JNIFLAGS = @H5_JNIFLAGS@ +H5_LDFLAGS = @H5_LDFLAGS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HAVE_DMALLOC = @HAVE_DMALLOC@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ +HAVE_LIBHDFS = @HAVE_LIBHDFS@ +HAVE_PTHREAD = @HAVE_PTHREAD@ +HDF5_DOXYGEN = @HDF5_DOXYGEN@ +HDF5_HL = @HDF5_HL@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HDF5_TESTS = @HDF5_TESTS@ +HDF5_TOOLS = @HDF5_TOOLS@ +HDF_CXX = @HDF_CXX@ +HDF_FORTRAN = @HDF_FORTRAN@ +HDF_JAVA = @HDF_JAVA@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +IGNORE_DISABLED_FILE_LOCKS = @IGNORE_DISABLED_FILE_LOCKS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +INTERNAL_DEBUG_OUTPUT = @INTERNAL_DEBUG_OUTPUT@ +JAR = @JAR@ +JAVA = @JAVA@ +JAVAC = @JAVAC@ +JAVACFLAGS = @JAVACFLAGS@ +JAVADOC = @JAVADOC@ +JAVAFLAGS = @JAVAFLAGS@ +JAVAPREFIX = @JAVAPREFIX@ +JAVA_JUNIT = @JAVA_JUNIT@ +JAVA_PATH_NAME = @JAVA_PATH_NAME@ +JAVA_VERSION = @JAVA_VERSION@ +JNIFLAGS = @JNIFLAGS@ +JNI_LDFLAGS = @JNI_LDFLAGS@ +JUNIT = @JUNIT@ +LARGE_PARALLEL_IO = @LARGE_PARALLEL_IO@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LL_PATH = @LL_PATH@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MAP_API = @MAP_API@ +MEMORYALLOCSANITYCHECK = @MEMORYALLOCSANITYCHECK@ +MIRROR_VFD = @MIRROR_VFD@ +MKDIR_P = @MKDIR_P@ +MPE = @MPE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +OBJEXT = @OBJEXT@ +OPTIMIZATION = @OPTIMIZATION@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ +PAC_FORTRAN_NUM_INTEGER_KINDS = @PAC_FORTRAN_NUM_INTEGER_KINDS@ +PARALLEL = @PARALLEL@ +PARALLEL_FILTERED_WRITES = @PARALLEL_FILTERED_WRITES@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PREADWRITE = @PREADWRITE@ +PROFILING = @PROFILING@ +RANLIB = @RANLIB@ +RECURSIVE_RW_LOCKS = @RECURSIVE_RW_LOCKS@ +ROOT = @ROOT@ +ROS3_VFD = @ROS3_VFD@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SIZE_T = @SIZE_T@ +STATIC_EXEC = @STATIC_EXEC@ +STATIC_SHARED = @STATIC_SHARED@ +STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ +STRIP = @STRIP@ +SYMBOLS = @SYMBOLS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTS_JUNIT = @TESTS_JUNIT@ +THREADSAFE = @THREADSAFE@ +TIME = @TIME@ +TR = @TR@ +TRACE_API = @TRACE_API@ +UNAME_INFO = @UNAME_INFO@ +USE_FILE_LOCKING = @USE_FILE_LOCKING@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +USINGMEMCHECKER = @USINGMEMCHECKER@ +VERSION = @VERSION@ +WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ +_ACJNI_JAVAC = @_ACJNI_JAVAC@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +ac_ct_FC = @ac_ct_FC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ + +# Install directories that automake doesn't know about +docdir = $(exec_prefix)/doc +dvidir = @dvidir@ +enable_shared = @enable_shared@ +enable_static = @enable_static@ +examplesdir = @examplesdir@ +exec_prefix = @exec_prefix@ +fortran_linux_linker_option = @fortran_linux_linker_option@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Some machines need a command to run executables; this is that command +# so that our tests will run. +# We use RUNEXEC instead of RUNSERIAL directly because it may be that +# some tests need to be run with a different command. Older versions +# of the makefiles used the command +# $(LIBTOOL) --mode=execute +# in some directories, for instance. +RUNEXEC = $(RUNSERIAL) + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5JNI = $(top_builddir)/java/src/jni/libhdf5_java.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la + +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by Gnu at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. + +# Scripts used to build examples +# If only shared libraries have been installed, have h5cc build examples with +# shared libraries instead of static libraries +H5CC = ${DESTDIR}$(bindir)/h5cc +H5CC_PP = ${DESTDIR}$(bindir)/h5pcc +H5FC = ${DESTDIR}$(bindir)/h5fc +H5FC_PP = ${DESTDIR}$(bindir)/h5pfc +H5CPP = ${DESTDIR}$(bindir)/h5c++ +ACLOCAL_AMFLAGS = "-I m4" + +# The trace script; this is used on source files from the C library to +# insert tracing macros. +TRACE = perl $(top_srcdir)/bin/trace + +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +# *.clog and *.clog2 are from the MPE option. +CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 + +# Add libtool shared library version numbers to the HDF5 library +# See libtool versioning documentation online. +# After making changes, run bin/reconfigure to update other configure related +# files like Makefile.in. +LT_VERS_INTERFACE = 201 +LT_VERS_AGE = 1 +LT_VERS_REVISION = 0 +LT_CXX_VERS_INTERFACE = 201 +LT_CXX_VERS_REVISION = 0 +LT_CXX_VERS_AGE = 1 +LT_F_VERS_INTERFACE = 200 +LT_F_VERS_REVISION = 1 +LT_F_VERS_AGE = 0 +LT_HL_VERS_INTERFACE = 200 +LT_HL_VERS_REVISION = 1 +LT_HL_VERS_AGE = 0 +LT_HL_CXX_VERS_INTERFACE = 200 +LT_HL_CXX_VERS_REVISION = 1 +LT_HL_CXX_VERS_AGE = 0 +LT_HL_F_VERS_INTERFACE = 200 +LT_HL_F_VERS_REVISION = 1 +LT_HL_F_VERS_AGE = 0 +LT_JAVA_VERS_INTERFACE = 200 +LT_JAVA_VERS_REVISION = 1 +LT_JAVA_VERS_AGE = 0 +LT_TOOLS_VERS_INTERFACE = 200 +LT_TOOLS_VERS_REVISION = 1 +LT_TOOLS_VERS_AGE = 0 + +# This is our main target +lib_LTLIBRARIES = libhdf5_cpp.la + +# Add libtool numbers to the HDF5 C++ library (from config/lt_vers.am) +libhdf5_cpp_la_LDFLAGS = -version-info $(LT_CXX_VERS_INTERFACE):$(LT_CXX_VERS_REVISION):$(LT_CXX_VERS_AGE) $(AM_LDFLAGS) +bin_SCRIPTS = h5c++ + +# Source files for the library +libhdf5_cpp_la_SOURCES = H5Exception.cpp H5IdComponent.cpp \ + H5DataSpace.cpp H5PropList.cpp H5Library.cpp \ + H5FaccProp.cpp H5FcreatProp.cpp H5LcreatProp.cpp \ + H5LaccProp.cpp H5DaccProp.cpp H5DxferProp.cpp \ + H5DcreatProp.cpp H5Location.cpp H5AbstractDs.cpp \ + H5Attribute.cpp H5Object.cpp H5OcreatProp.cpp \ + H5DataType.cpp H5AtomType.cpp H5PredType.cpp \ + H5EnumType.cpp H5IntType.cpp H5FloatType.cpp \ + H5StrType.cpp H5ArrayType.cpp H5VarLenType.cpp \ + H5CompType.cpp H5DataSet.cpp H5CommonFG.cpp H5Group.cpp \ + H5File.cpp + + +# HDF5 C++ library depends on HDF5 Library. +libhdf5_cpp_la_LIBADD = $(LIBHDF5) + +# Public headers +include_HEADERS = H5Cpp.h H5AbstractDs.h H5AtomType.h \ + H5Attribute.h H5Classes.h H5CommonFG.h H5CompType.h \ + H5DataSet.h H5DataSpace.h H5DataType.h H5OcreatProp.h \ + H5DaccProp.h H5DcreatProp.h \ + H5DxferProp.h H5EnumType.h H5Exception.h H5FaccProp.h \ + H5FcreatProp.h H5File.h H5FloatType.h H5Group.h \ + H5IdComponent.h H5Include.h H5IntType.h H5LcreatProp.h \ + H5LaccProp.h H5Library.h H5Location.h H5Object.h \ + H5PredType.h H5PropList.h H5StrType.h H5CppDoc.h \ + H5ArrayType.h H5VarLenType.h + + +# h5c++ and libhdf5.settings are generated during configure. Remove only when +# distclean. +DISTCLEANFILES = h5c++ libhdf5.settings + +# Mark this directory as part of the C++ API +CXX_API = yes + +# Automake needs to be taught how to build lib, progs and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) + +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) + +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = +REALTIMEOUTPUT = $(realtimeOutput) +TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) +TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) +all: all-am + +.SUFFIXES: +.SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign c++/src/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__empty): + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +h5c++: $(top_builddir)/config.status $(srcdir)/h5c++.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } + +libhdf5_cpp.la: $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_DEPENDENCIES) $(EXTRA_libhdf5_cpp_la_DEPENDENCIES) + $(AM_V_CXXLD)$(libhdf5_cpp_la_LINK) -rpath $(libdir) $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_LIBADD) $(LIBS) +install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AbstractDs.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5ArrayType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AtomType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Attribute.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CommonFG.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CompType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DaccProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSet.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSpace.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DcreatProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DxferProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5EnumType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Exception.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FaccProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FcreatProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5File.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FloatType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Group.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IdComponent.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IntType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LaccProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LcreatProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Library.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Location.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Object.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5OcreatProp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PredType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PropList.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5StrType.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5VarLenType.Plo@am__quote@ + +.cpp.o: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< + +.cpp.obj: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.cpp.lo: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ +@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + elif test -n "$$redo_logs"; then \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +.sh.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.sh$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(HEADERS) all-local +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-includeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binSCRIPTS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool mostlyclean-local + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ + check-am clean clean-generic clean-libLTLIBRARIES \ + clean-libtool cscopelist-am ctags ctags-am distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-binSCRIPTS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ + pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \ + uninstall-binSCRIPTS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + +.PRECIOUS: Makefile + + +# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. +# This tells the Makefiles that these targets are not files to be built but +# commands that should be executed even if a file with the same name already +# exists. +.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ + build-tests check-clean check-install check-p check-s check-vfd \ + check-passthrough-vol install-doc lib progs tests uninstall-doc \ + _exec_check-s _test help trace doxygen + +help: + @$(top_srcdir)/bin/makehelp + +# Some C++ compilers/linkers (PGI?) create a directory named "ii_files" that +# holds *.ii files, which are template entity instantiations. +# This entire directory should be cleaned. +mostlyclean-local: + @if test -d ii_files; then \ + $(RM) -rf ii_files; \ + fi + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) + +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +# UPDATE: docs no longer reside in this build tree, so this target +# is deprecated. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) -rf $(CHECK_CLEANFILES) + +# run check-clean whenever mostlyclean is run +mostlyclean-local: build-check-clean + +# check-install is just a synonym for installcheck +check-install: installcheck + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in chk_TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: + @$(MAKE) build-check-s + @$(MAKE) build-check-p + +# Actual execution of check-s. +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) + +# The dummy.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ + tname=$(@:.chkexe_=)$(EXEEXT);\ + log=$(@:.chkexe_=.chklog); \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ + echo "No need to test $${tname} again."; \ + else \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "============================" | tee $${log}; \ + else \ + echo "============================" > $${log}; \ + fi; \ + if test "X$(FORTRAN_API)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + else \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ + fi; \ + elif test "X$(CXX_API)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log};\ + else \ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" >> $${log};\ + fi; \ + else \ + echo "Testing: $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + else \ + echo "Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + if test -n "$(HDF5_VOL_CONNECTOR)"; then \ + echo "VOL connector: $(HDF5_VOL_CONNECTOR)" | tee -a $${log}; \ + fi; \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" | tee -a $${log}; \ + fi; \ + else \ + if test -n "$(HDF5_VOL_CONNECTOR)"; then \ + echo "VOL connector: $(HDF5_VOL_CONNECTOR)" >> $${log}; \ + fi; \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "============================" | tee -a $${log}; \ + else \ + echo "============================" >> $${log}; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) | tee -a $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + else \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + fi; \ + echo "" >> $${log}; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Finished testing $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + echo "============================" | tee -a $${log}; \ + else \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + fi; \ + if test -z "$(REALTIMEOUTPUT)"; then \ + cat $${log}; \ + fi; \ + fi; \ + fi + +# The dummysh.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + cmd=$(@:.chkexe_=);\ + tname=`basename $$cmd`;\ + chkname=`basename $(@:.chkexe_=.chkexe)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ + echo "No need to test $${tname} again."; \ + else \ + echo "============================" > $${log}; \ + if test "X$(FORTRAN_API)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + elif test "X$(CXX_API)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + else \ + echo "Testing $${tname} $(TEST_FLAGS)"; \ + echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + fi; \ + echo "============================" >> $${log}; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $${chkname} || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + echo "" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)"; \ + cat $${log}; \ + fi; \ + echo "============================"; \ + fi + +# Actual execution of check-p. +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. e.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ + fi; \ + done + @for test in $(TEST_SCRIPT_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ + fi; \ + done + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ + HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ + fi; \ + done + +# Run test with different passthrough Virtual Object Layer Connector +# NOTE: Will only succeed with passthrough VOL connectors that use +# the native VOL connector as the terminal connector. +check-passthrough-vol: $(LIB) $(PROGS) $(chk_TESTS) + @for vol in $(VOL_LIST) dummy; do \ + if test "$$vol" != dummy; then \ + echo "============================"; \ + echo "Testing VOL Connector: \"$$vol\""; \ + echo "============================"; \ + $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ + HDF5_VOL_CONNECTOR="$$vol" $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ + fi; \ + done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |