diff options
Diffstat (limited to 'c++')
| -rw-r--r-- | c++/Makefile.in | 29 | ||||
| -rw-r--r-- | c++/examples/Makefile.am | 2 | ||||
| -rw-r--r-- | c++/examples/Makefile.in | 42 | ||||
| -rw-r--r-- | c++/examples/testh5c++.sh.in | 7 | ||||
| -rw-r--r-- | c++/src/Makefile.in | 29 | ||||
| -rw-r--r-- | c++/test/Makefile.in | 31 |
6 files changed, 70 insertions, 70 deletions
diff --git a/c++/Makefile.in b/c++/Makefile.in index 290d66e..8c82ca9 100644 --- a/c++/Makefile.in +++ b/c++/Makefile.in @@ -73,7 +73,7 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ TESTS = subdir = c++ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -143,7 +143,7 @@ am__relativize = \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -161,12 +161,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -438,6 +435,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -818,7 +819,7 @@ check-clean :: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -844,7 +845,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -868,7 +869,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -878,7 +879,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -968,7 +969,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -998,7 +999,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/c++/examples/Makefile.am b/c++/examples/Makefile.am index dc2bc7c..cd9a9f6 100644 --- a/c++/examples/Makefile.am +++ b/c++/examples/Makefile.am @@ -23,7 +23,7 @@ include $(top_srcdir)/config/commence.am # These are the programs that 'make all' or 'make prog' will build and # which 'make check' will run. List them in the order they should be run. -TEST_PROG=create readdata writedata compound extend_ds chunks h5group +EXAMPLE_PROG=create readdata writedata compound extend_ds chunks h5group TEST_SCRIPT=testh5c++.sh # These are the example files to be installed diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 4fbb8a3..e9bbf47 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -76,10 +76,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am \ $(top_srcdir)/config/examples.am -TESTS = +TESTS = $(TEST_SCRIPT) subdir = c++/examples ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -110,7 +110,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -128,12 +128,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -394,7 +391,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5 # These are the programs that 'make all' or 'make prog' will build and # which 'make check' will run. List them in the order they should be run. -TEST_PROG = create readdata writedata compound extend_ds chunks h5group +EXAMPLE_PROG = create readdata writedata compound extend_ds chunks h5group TEST_SCRIPT = testh5c++.sh # These are the example files to be installed @@ -412,12 +409,11 @@ EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/c++ # Assume that all tests in this directory are examples, and tell # conclude.am when to build them. -EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG) -EXTRA_PROG = $(EXAMPLE_PROG) +EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA) # We need to tell automake what to clean MOSTLYCLEANFILES = *.raw *.meta *.o -CLEANFILES = $(TEST_PROG) $(TEST_PROG_PARA) +CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA) # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., @@ -430,6 +426,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -684,8 +684,8 @@ uninstall-local: install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) @for f in X $(INSTALL_FILES); do \ if test $$f != X; then \ - (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\ - chmod a-x $(EXAMPLEDIR)/$$f;\ + (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \ + chmod a-x $(EXAMPLEDIR)/$$f; \ fi; \ done @for f in X $(INSTALL_SCRIPT_FILES); do \ @@ -734,7 +734,7 @@ installcheck-local: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -760,7 +760,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -784,7 +784,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -794,7 +794,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -884,7 +884,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -914,7 +914,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/c++/examples/testh5c++.sh.in b/c++/examples/testh5c++.sh.in index db6d7e2..ca4fc56 100644 --- a/c++/examples/testh5c++.sh.in +++ b/c++/examples/testh5c++.sh.in @@ -19,6 +19,8 @@ # Modification: # +srcdir=@srcdir@ + # Initializations TESTNAME=h5c++ EXIT_SUCCESS=0 @@ -42,11 +44,6 @@ verbose=yes myos=`uname -s` myhostnama=`uname -n` -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - # Generate some source files and library for tests. suffix=cpp # source file suffix hdf5main=${H5TOOL}_hdf5main.$suffix diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index 231459f..c3ea22c 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -81,7 +81,7 @@ DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ TESTS = subdir = c++/src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -185,7 +185,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -203,12 +203,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1) AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -523,6 +520,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -980,7 +981,7 @@ mostlyclean-local: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -1006,7 +1007,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -1030,7 +1031,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -1040,7 +1041,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1130,7 +1131,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1160,7 +1161,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 2eccbc5..00a8056 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -75,10 +75,10 @@ DIST_COMMON = $(srcdir)/H5srcdir_str.h.in $(srcdir)/Makefile.am \ # Shared C++ libraries aren't universally supported. @CXX_SHARED_CONDITIONAL_FALSE@am__append_1 = -static check_PROGRAMS = $(am__EXEEXT_1) -TESTS = $(check_PROGRAMS) +TESTS = $(am__EXEEXT_1) subdir = c++/test ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -146,7 +146,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -164,12 +164,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1) AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -456,6 +453,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -799,7 +800,7 @@ mostlyclean-local: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -825,7 +826,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -849,7 +850,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -859,7 +860,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -949,7 +950,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -979,7 +980,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ |