diff options
Diffstat (limited to 'c++')
| -rwxr-xr-x | c++/configure | 2087 | ||||
| -rw-r--r-- | c++/configure.in | 2 |
2 files changed, 1332 insertions, 757 deletions
diff --git a/c++/configure b/c++/configure index 2ab0dfa..002fc98 100755 --- a/c++/configure +++ b/c++/configure @@ -1,7 +1,7 @@ #! /bin/sh # From configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53 for HDF5 C++ 1.5.61. +# Generated by GNU Autoconf 2.57 for HDF5 C++ 1.5.62. # # Report bugs to <hdfhelp@ncsa.uiuc.edu>. # @@ -9,173 +9,6 @@ # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF - -EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -184,11 +17,13 @@ fi if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi -# NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset @@ -196,34 +31,42 @@ else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -234,6 +77,7 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -244,15 +88,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -300,6 +144,8 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -372,6 +218,12 @@ else fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. @@ -388,7 +240,166 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH + + +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF + +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + # Name of the host. @@ -402,6 +413,7 @@ exec 6>&1 # Initializations. # ac_default_prefix=/usr/local +ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= @@ -416,8 +428,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5 C++' PACKAGE_TARNAME='hdf5-c--' -PACKAGE_VERSION='1.5.61' -PACKAGE_STRING='HDF5 C++ 1.5.61' +PACKAGE_VERSION='1.5.62' +PACKAGE_STRING='HDF5 C++ 1.5.62' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/H5Library.cpp" @@ -458,6 +470,8 @@ ac_includes_default="\ # include <unistd.h> #endif" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS ROOT DEFAULT_LIBS CXX CXXFLAGS LDFLAGS ac_ct_CXX EXEEXT OBJEXT CXXCPP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC CFLAGS ac_ct_CC LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL PERL AR LT_STATIC_EXEC DYNAMIC_DIRS SEARCH SETX LIBOBJS LTLIBOBJS' +ac_subst_files='DEPEND COMMENCE CONCLUDE' # Initialize some variables set by options. ac_init_help= @@ -881,6 +895,9 @@ if test ! -r $srcdir/$ac_unique_file; then { (exit 1); exit 1; }; } fi fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias @@ -934,7 +951,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 C++ 1.5.61 to adapt to many kinds of systems. +\`configure' configures HDF5 C++ 1.5.62 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -995,7 +1012,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 C++ 1.5.61:";; + short | recursive ) echo "Configuration of HDF5 C++ 1.5.62:";; esac cat <<\_ACEOF @@ -1075,7 +1092,7 @@ esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` @@ -1101,8 +1118,8 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 C++ configure 1.5.61 -generated by GNU Autoconf 2.53 +HDF5 C++ configure 1.5.62 +generated by GNU Autoconf 2.57 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. @@ -1116,8 +1133,8 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 C++ $as_me 1.5.61, which was -generated by GNU Autoconf 2.53. Invocation command line was +It was created by HDF5 C++ $as_me 1.5.62, which was +generated by GNU Autoconf 2.57. Invocation command line was $ $0 $@ @@ -1169,27 +1186,54 @@ _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= +ac_configure_args0= +ac_configure_args1= ac_sep= -for ac_arg +ac_must_keep_next=false +for ac_pass in 1 2 do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n ) continue ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - esac - # Get rid of the leading space. + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1200,6 +1244,7 @@ trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo + cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## @@ -1222,6 +1267,35 @@ _ASBOX esac; } echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## @@ -1229,7 +1303,7 @@ _ASBOX ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h + sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && @@ -1395,6 +1469,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + ac_aux_dir= for ac_dir in ../bin $srcdir/../bin; do if test -f $ac_dir/install-sh; then @@ -1681,14 +1756,12 @@ ac_compiler=`set X $ac_compile; echo $2` cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1698,7 +1771,7 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" +ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. @@ -1717,26 +1790,39 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= -for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; - ls a.out conftest 2>/dev/null; - ls a.* conftest.* 2>/dev/null`; do +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool --akim. - export ac_cv_exeext - break;; - * ) break;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables" >&5 -echo "$as_me: error: C++ compiler cannot create executables" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ compiler cannot create executables +See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi @@ -1763,9 +1849,11 @@ if test "$cross_compiling" != yes; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'." >&5 +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'." >&2;} +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi @@ -1773,7 +1861,7 @@ fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 -rm -f a.out a.exe conftest$ac_cv_exeext +rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. @@ -1793,9 +1881,10 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; @@ -1803,8 +1892,10 @@ for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -1822,14 +1913,12 @@ if test "${ac_cv_objext+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1846,16 +1935,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -1872,14 +1964,12 @@ if test "${ac_cv_cxx_compiler_gnu+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1906,7 +1996,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -1926,14 +2017,12 @@ if test "${ac_cv_prog_cxx_g+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1957,7 +2046,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cxx_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -1990,15 +2080,13 @@ for ac_declaration in \ do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2022,20 +2110,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 : else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2059,7 +2146,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest.$ac_ext done @@ -2095,18 +2183,28 @@ for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" -#include <assert.h> +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2123,7 +2221,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2133,13 +2232,17 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2157,7 +2260,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2186,18 +2290,28 @@ for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" -#include <assert.h> +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2214,7 +2328,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2224,13 +2339,17 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2248,7 +2367,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2261,8 +2381,10 @@ rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&2;} + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -2272,15 +2394,15 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`" -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: - @echo 'ac_maketemp="${MAKE}"' + @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` @@ -2648,9 +2770,7 @@ if test $ac_prog_rejected = yes; then # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$as_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi @@ -2755,8 +2875,10 @@ fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. @@ -2786,14 +2908,12 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2820,7 +2940,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -2840,14 +2961,12 @@ if test "${ac_cv_prog_cc_g+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2871,7 +2990,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -2893,6 +3013,102 @@ else CFLAGS= fi fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide @@ -2925,15 +3141,13 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2957,20 +3171,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 : else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2994,7 +3207,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest.$ac_ext done @@ -3007,7 +3221,8 @@ fi else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c @@ -3597,18 +3812,28 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" -#include <assert.h> +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -3625,7 +3850,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -3635,13 +3861,17 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -3659,7 +3889,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -3688,18 +3919,28 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" -#include <assert.h> +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -3716,7 +3957,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -3726,13 +3968,17 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -3750,7 +3996,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -3763,8 +4010,10 @@ rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -3775,6 +4024,21 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then @@ -3782,48 +4046,59 @@ if test "${ac_cv_header_stdc+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> #include <stdarg.h> #include <string.h> #include <float.h> +int +main () +{ + + ; + return 0; +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <string.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3836,12 +4111,16 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3857,13 +4136,18 @@ if test $ac_cv_header_stdc = yes; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ctype.h> #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) @@ -3896,11 +4180,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi @@ -3935,7 +4220,11 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> @@ -3955,7 +4244,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -3990,7 +4280,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -4009,7 +4303,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -4021,13 +4316,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -4044,7 +4343,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -4057,14 +4357,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -4405,7 +4723,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 4408 "configure"' > conftest.$ac_ext + echo '#line 4726 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -4445,14 +4763,12 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4476,7 +4792,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + lt_cv_cc_needs_belf=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -4784,14 +5101,12 @@ else CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4830,7 +5145,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + lt_cv_prog_cc_pic_works=no fi @@ -4873,14 +5189,12 @@ else LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4904,7 +5218,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 lt_cv_prog_cc_static_works=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" @@ -4946,7 +5261,7 @@ chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no -if { (eval echo configure:4949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +if { (eval echo configure:5264: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then @@ -4988,14 +5303,12 @@ else ac_objext=lo cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5026,7 +5339,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest.$ac_ext ac_objext="$save_objext" @@ -5074,14 +5388,12 @@ echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_ compiler_rtti_exceptions=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5112,7 +5424,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi rm -f conftest.$ac_objext conftest.$ac_ext CFLAGS="$save_CFLAGS" @@ -6351,37 +6664,44 @@ if test "${ac_cv_func_shl_load+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. */ -#include <assert.h> + which can conflict with char shl_load (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else -f = shl_load; +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != shl_load; ; return 0; } @@ -6401,7 +6721,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6420,7 +6741,11 @@ else LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6429,12 +6754,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6458,7 +6777,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dld_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6476,37 +6796,44 @@ if test "${ac_cv_func_dlopen+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. */ -#include <assert.h> + which can conflict with char dlopen (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else -f = dlopen; +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != dlopen; ; return 0; } @@ -6526,7 +6853,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6545,7 +6873,11 @@ else LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6554,12 +6886,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6583,7 +6909,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dl_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6603,7 +6930,11 @@ else LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6612,12 +6943,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6641,7 +6966,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_svld_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6661,7 +6987,11 @@ else LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6670,12 +7000,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dld_link (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6699,7 +7023,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dld_dld_link=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6757,7 +7082,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<EOF -#line 6760 "configure" +#line 7085 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -6855,7 +7180,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<EOF -#line 6858 "configure" +#line 7183 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -7808,7 +8133,11 @@ else LIBS="-lm $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7817,12 +8146,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char ceil (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7846,7 +8169,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_m_ceil=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_m_ceil=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -7875,7 +8199,11 @@ else LIBS="-lsocket $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7884,12 +8212,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char socket (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7913,7 +8235,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_socket_socket=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_socket_socket=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -7940,7 +8263,11 @@ else LIBS="-lnsl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7949,12 +8276,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char xdr_int (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7978,7 +8299,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_nsl_xdr_int=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_nsl_xdr_int=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8068,13 +8390,19 @@ echo "$as_me:$LINENO: checking if $CXX needs old style header files in includes" echo $ECHO_N "checking if $CXX needs old style header files in includes... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <iostream> @@ -8098,26 +8426,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) echo yes CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: checking if $CXX can handle namespaces" >&5 echo $ECHO_N "checking if $CXX can handle namespaces... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ namespace H5 { int fnord; @@ -8147,26 +8482,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) echo no CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: checking if $CXX supports std" >&5 echo $ECHO_N "checking if $CXX supports std... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <string> @@ -8195,26 +8537,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) echo no CXXFLAGS="${CXXFLAGS} -DH5_NO_STD" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: checking if $CXX supports bool types" >&5 echo $ECHO_N "checking if $CXX supports bool types... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main(void) { bool flag; @@ -8239,26 +8588,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) echo no CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: checking if $CXX can handle static cast" >&5 echo $ECHO_N "checking if $CXX can handle static cast... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main(void) { float test_float; @@ -8286,14 +8642,15 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) echo no CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi @@ -8328,7 +8685,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -8347,7 +8708,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8359,13 +8721,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8382,7 +8748,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8395,14 +8762,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -8434,7 +8819,11 @@ else LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8443,12 +8832,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8472,7 +8855,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8498,37 +8882,44 @@ if test "${ac_cv_func_compress2+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include <assert.h> + which can conflict with char compress2 (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_compress2) || defined (__stub___compress2) choke me #else -f = compress2; +char (*f) () = compress2; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != compress2; ; return 0; } @@ -8548,7 +8939,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_compress2=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8620,7 +9012,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -8639,7 +9035,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8651,13 +9048,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8674,7 +9075,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8687,14 +9089,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -8733,7 +9153,11 @@ else LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8742,12 +9166,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8771,7 +9189,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8797,37 +9216,44 @@ if test "${ac_cv_func_compress2+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include <assert.h> + which can conflict with char compress2 (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_compress2) || defined (__stub___compress2) choke me #else -f = compress2; +char (*f) () = compress2; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != compress2; ; return 0; } @@ -8847,7 +9273,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_compress2=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8905,7 +9332,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -8924,7 +9355,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8936,13 +9368,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8959,7 +9395,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8972,14 +9409,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -9011,7 +9466,11 @@ else LIBS="-lsz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -9020,12 +9479,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -9049,7 +9502,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_sz_SZ_BufftoBuffCompress=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -9129,7 +9583,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -9148,7 +9606,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -9160,13 +9619,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -9183,7 +9646,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9196,14 +9660,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -9242,7 +9724,11 @@ else LIBS="-lsz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -9251,12 +9737,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -9280,7 +9760,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_sz_SZ_BufftoBuffCompress=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -9346,7 +9827,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF @@ -9365,7 +9850,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -9377,13 +9863,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -9400,7 +9890,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9413,14 +9904,32 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -9452,7 +9961,11 @@ _ACEOF echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdio.h> #include <stdlib.h> @@ -9466,12 +9979,6 @@ echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6 #include <sys/socket.h> #endif -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -9501,7 +10008,8 @@ _ACEOF echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 @@ -9523,7 +10031,7 @@ cat >confcache <<\_ACEOF # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overriden when +# `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -9558,7 +10066,7 @@ _ACEOF t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if cmp -s $cache_file confcache; then :; else +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -9659,7 +10167,7 @@ rm -f conftest conftest.o conftest.c core core.* *.core dummy.o saved_no_create=$no_create no_create=yes -ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile src/h5c++ test/Makefile examples/Makefile" + ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile src/h5c++ test/Makefile examples/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -9671,7 +10179,7 @@ cat >confcache <<\_ACEOF # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overriden when +# `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -9706,7 +10214,7 @@ _ACEOF t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if cmp -s $cache_file confcache; then :; else +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -9768,6 +10276,21 @@ DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` rm -f confdef2opt.sed +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -9782,11 +10305,12 @@ cat >$CONFIG_STATUS <<_ACEOF # configure, is in config.log if it exists. debug=false +ac_cs_recheck=false +ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -9795,11 +10319,13 @@ cat >>$CONFIG_STATUS <<\_ACEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi -# NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset @@ -9807,34 +10333,42 @@ else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -9845,6 +10379,7 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -9855,15 +10390,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -9912,6 +10447,8 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -9985,6 +10522,12 @@ else fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. @@ -10001,7 +10544,7 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH exec 6>&1 @@ -10017,8 +10560,8 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 C++ $as_me 1.5.61, which was -generated by GNU Autoconf 2.53. Invocation command line was +This file was extended by HDF5 C++ $as_me 1.5.62, which was +generated by GNU Autoconf 2.57. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -10058,6 +10601,7 @@ Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit + -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] @@ -10071,8 +10615,8 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 C++ config.status 1.5.61 -configured by $0, generated by GNU Autoconf 2.53, +HDF5 C++ config.status 1.5.62 +configured by $0, generated by GNU Autoconf 2.57, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 @@ -10093,25 +10637,25 @@ do --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift ;; - -*);; *) # This is not an option, so the user has probably given explicit # arguments. + ac_option=$1 ac_need_defaults=false;; esac - case $1 in + case $ac_option in # Handling of the options. _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" - exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) @@ -10126,13 +10670,16 @@ Try \`$0 --help' for more information." >&2;} --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 @@ -10147,6 +10694,20 @@ Try \`$0 --help' for more information." >&2;} shift done +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + _ACEOF @@ -10184,6 +10745,9 @@ if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files fi +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { @@ -10192,17 +10756,17 @@ $debug || } # Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} + { - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=$TMPDIR/cs$$-$RANDOM + tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 + echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } @@ -10282,19 +10846,22 @@ s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@PERL@,$PERL,;t t s,@AR@,$AR,;t t s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t +s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t +s,@SEARCH@,$SEARCH,;t t +s,@SETX@,$SETX,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t /@DEPEND@/r $DEPEND s,@DEPEND@,,;t t -s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t /@COMMENCE@/r $COMMENCE s,@COMMENCE@,,;t t /@CONCLUDE@/r $CONCLUDE s,@CONCLUDE@,,;t t -s,@SEARCH@,$SEARCH,;t t -s,@SETX@,$SETX,;t t CEOF _ACEOF @@ -10365,25 +10932,30 @@ echo X"$ac_file" | /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. @@ -10413,7 +10985,7 @@ esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` @@ -10514,8 +11086,11 @@ ac_clean_files=$ac_clean_files_save # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. diff --git a/c++/configure.in b/c++/configure.in index 0f14820..b768d76 100644 --- a/c++/configure.in +++ b/c++/configure.in @@ -27,7 +27,7 @@ dnl dnl NOTE: Don't forget to change the version number here when we do a dnl release!!! dnl -AC_INIT([HDF5 C++], [1.5.61], [hdfhelp@ncsa.uiuc.edu]) +AC_INIT([HDF5 C++], [1.5.62], [hdfhelp@ncsa.uiuc.edu]) AC_CONFIG_SRCDIR([src/H5Library.cpp]) AC_CONFIG_AUX_DIR([../bin]) |