diff options
Diffstat (limited to 'config/cmake/ConfigureChecks.cmake')
| -rw-r--r-- | config/cmake/ConfigureChecks.cmake | 194 |
1 files changed, 169 insertions, 25 deletions
diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake index ab1fa89..43aa243 100644 --- a/config/cmake/ConfigureChecks.cmake +++ b/config/cmake/ConfigureChecks.cmake @@ -5,7 +5,7 @@ # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# distribution tree, or in https://www.hdfgroup.org/licenses. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # @@ -30,7 +30,7 @@ MARK_AS_ADVANCED (HDF5_STRICT_FORMAT_CHECKS) # ---------------------------------------------------------------------- # Decide whether the data accuracy has higher priority during data -# conversions. If not, some hard conversions will still be prefered even +# conversions. If not, some hard conversions will still be preferred even # though the data may be wrong (for example, some compilers don't # support denormalized floating values) to maximize speed. #----------------------------------------------------------------------------- @@ -61,12 +61,29 @@ if (HDF5_ENABLE_CODESTACK) endif () MARK_AS_ADVANCED (HDF5_ENABLE_CODESTACK) +# ---------------------------------------------------------------------- +# Check if they would like to use file locking by default #----------------------------------------------------------------------------- -# Are we going to use HSIZE_T +option (HDF5_USE_FILE_LOCKING "Use file locking by default (mainly for SWMR)" ON) +if (HDF5_USE_FILE_LOCKING) + set (${HDF_PREFIX}_USE_FILE_LOCKING 1) +endif () + +# ---------------------------------------------------------------------- +# Check if they would like to ignore file locks when disabled on a file system #----------------------------------------------------------------------------- -option (HDF5_ENABLE_HSIZET "Enable datasets larger than memory" ON) -if (HDF5_ENABLE_HSIZET) - set (${HDF_PREFIX}_HAVE_LARGE_HSIZET 1) +option (HDF5_IGNORE_DISABLED_FILE_LOCKS "Ignore file locks when disabled on file system" ON) +if (HDF5_IGNORE_DISABLED_FILE_LOCKS) + set (${HDF_PREFIX}_IGNORE_DISABLED_FILE_LOCKS 1) +endif () + +# Set the libhdf5.settings file variable +if (HDF5_IGNORE_DISABLED_FILE_LOCKS AND HDF5_USE_FILE_LOCKING) + set (HDF5_FILE_LOCKING_SETTING "best-effort") +elseif (HDF5_IGNORE_DISABLED_FILE_LOCKS) + set (HDF5_FILE_LOCKING_SETTING "yes") +else () + set (HDF5_FILE_LOCKING_SETTING "no") endif () # so far we have no check for this @@ -100,8 +117,6 @@ endif () # END of WINDOWS Hard code Values # ---------------------------------------------------------------------- -CHECK_FUNCTION_EXISTS (difftime ${HDF_PREFIX}_HAVE_DIFFTIME) - # Find the library containing clock_gettime() if (MINGW OR NOT WINDOWS) CHECK_FUNCTION_EXISTS (clock_gettime CLOCK_GETTIME_IN_LIBC) @@ -134,20 +149,24 @@ if (NOT WINDOWS) OUTPUT_VARIABLE OUTPUT ) if (TEST_DIRECT_VFD_WORKS_COMPILE) - if (TEST_DIRECT_VFD_WORKS_RUN MATCHES 0) + if (TEST_DIRECT_VFD_WORKS_RUN EQUAL "0") HDF_FUNCTION_TEST (HAVE_DIRECT) set (CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -D_GNU_SOURCE") add_definitions ("-D_GNU_SOURCE") else () set (TEST_DIRECT_VFD_WORKS "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "${msg}... no") + endif () file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log "Test TEST_DIRECT_VFD_WORKS Run failed with the following output and exit code:\n ${OUTPUT}\n" ) endif () else () set (TEST_DIRECT_VFD_WORKS "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "${msg}... no") + endif () file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log "Test TEST_DIRECT_VFD_WORKS Compile failed with the following output:\n ${OUTPUT}\n" ) @@ -160,10 +179,6 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF) if (HDF5_ENABLE_ROS3_VFD) - # CMake version 3.13 fixed FindCURL module - if(CMAKE_VERSION VERSION_LESS "3.13.0" AND WIN32) - MESSAGE(FATAL_ERROR "Windows builds for this option requires a minimum of CMake 3.13") - endif () find_package(CURL REQUIRED) find_package(OpenSSL REQUIRED) if (${CURL_FOUND} AND ${OPENSSL_FOUND}) @@ -171,33 +186,156 @@ option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF) list (APPEND LINK_LIBS ${CURL_LIBRARIES} ${OPENSSL_LIBRARIES}) INCLUDE_DIRECTORIES (${CURL_INCLUDE_DIRS} ${OPENSSL_INCLUDE_DIR}) else () - message (STATUS "The Read-Only S3 VFD was requested but cannot be built.\nPlease check that openssl and cURL are available on your\nsystem, and/or re-configure without option HDF5_ENABLE_ROS3_VFD.") + message (WARNING "The Read-Only S3 VFD was requested but cannot be built.\nPlease check that openssl and cURL are available on your\nsystem, and/or re-configure without option HDF5_ENABLE_ROS3_VFD.") endif () endif () +# ---------------------------------------------------------------------- +# Check whether we can build the Mirror VFD +# Header-check flags set in config/cmake_ext_mod/ConfigureChecks.cmake +# ---------------------------------------------------------------------- +option (HDF5_ENABLE_MIRROR_VFD "Build the Mirror Virtual File Driver" OFF) +if (HDF5_ENABLE_MIRROR_VFD) + if ( ${HDF_PREFIX}_HAVE_NETINET_IN_H AND + ${HDF_PREFIX}_HAVE_NETDB_H AND + ${HDF_PREFIX}_HAVE_ARPA_INET_H AND + ${HDF_PREFIX}_HAVE_SYS_SOCKET_H AND + ${HDF_PREFIX}_HAVE_FORK) + set (${HDF_PREFIX}_HAVE_MIRROR_VFD 1) + else() + message(WARNING "The socket-based Mirror VFD was requested but cannot be built. System prerequisites are not met.") + endif() +endif() + #----------------------------------------------------------------------------- # Check if C has __float128 extension #----------------------------------------------------------------------------- -CHECK_TYPE_SIZE("__float128" ${HDF_PREFIX}_SIZEOF___FLOAT128) -if (${${HDF_PREFIX}_SIZEOF___FLOAT128}) +HDF_CHECK_TYPE_SIZE(__float128 _SIZEOF___FLOAT128) +if (${_SIZEOF___FLOAT128}) set (${HDF_PREFIX}_HAVE_FLOAT128 1) + set (${HDF_PREFIX}_SIZEOF___FLOAT128 ${_SIZEOF___FLOAT128}) else () set (${HDF_PREFIX}_HAVE_FLOAT128 0) set (${HDF_PREFIX}_SIZEOF___FLOAT128 0) endif () -CHECK_TYPE_SIZE("_Quad" ${HDF_PREFIX}_SIZEOF__QUAD) -if (NOT ${${HDF_PREFIX}_SIZEOF__QUAD}) +HDF_CHECK_TYPE_SIZE(_Quad _SIZEOF__QUAD) +if (NOT ${_SIZEOF__QUAD}) set (${HDF_PREFIX}_SIZEOF__QUAD 0) +else () + set (${HDF_PREFIX}_SIZEOF__QUAD ${_SIZEOF__QUAD}) endif () #----------------------------------------------------------------------------- +# The provided CMake C macros don't provide a general compile/run function +# so this one is used. +#----------------------------------------------------------------------------- +set (RUN_OUTPUT_PATH_DEFAULT ${CMAKE_BINARY_DIR}) +macro (C_RUN FUNCTION_NAME SOURCE_CODE RETURN_VAR RETURN_OUTPUT_VAR) + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "Detecting C ${FUNCTION_NAME}") + endif () + file (WRITE + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c + ${SOURCE_CODE} + ) + TRY_RUN (RUN_RESULT_VAR COMPILE_RESULT_VAR + ${CMAKE_BINARY_DIR} + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c + COMPILE_DEFINITIONS "-D_SIZEOF___FLOAT128=${H5_SIZEOF___FLOAT128};-D_HAVE_QUADMATH_H=${H5_HAVE_QUADMATH_H}" + COMPILE_OUTPUT_VARIABLE COMPILEOUT + RUN_OUTPUT_VARIABLE OUTPUT_VAR + ) + + set (${RETURN_OUTPUT_VAR} ${OUTPUT_VAR}) + + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + message (VERBOSE "Test COMPILE_RESULT_VAR ${COMPILE_RESULT_VAR} ") + message (VERBOSE "Test COMPILE_OUTPUT ${COMPILEOUT} ") + message (VERBOSE "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + message (VERBOSE "Test RUN_RESULT_VAR ${RUN_RESULT_VAR} ") + message (VERBOSE "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + endif () + + if (COMPILE_RESULT_VAR) + if (RUN_RESULT_VAR EQUAL "0") + set (${RETURN_VAR} 1 CACHE INTERNAL "Have C function ${FUNCTION_NAME}") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "Testing C ${FUNCTION_NAME} - OK") + endif () + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + "Determining if the C ${FUNCTION_NAME} exists passed with the following output:\n" + "${OUTPUT_VAR}\n\n" + ) + else () + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "Testing C ${FUNCTION_NAME} - Fail") + endif () + set (${RETURN_VAR} 0 CACHE INTERNAL "Have C function ${FUNCTION_NAME}") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + "Determining if the C ${FUNCTION_NAME} exists failed with the following output:\n" + "${OUTPUT_VAR}\n\n") + endif () + else () + message (FATAL_ERROR "Compilation of C ${FUNCTION_NAME} - Failed") + endif () +endmacro () + +set (PROG_SRC + " +#include <float.h>\n\ +#include <stdio.h>\n\ +#define CHECK_FLOAT128 _SIZEOF___FLOAT128\n\ +#if CHECK_FLOAT128!=0\n\ +#if _HAVE_QUADMATH_H!=0\n\ +#include <quadmath.h>\n\ +#endif\n\ +#ifdef FLT128_DIG\n\ +#define C_FLT128_DIG FLT128_DIG\n\ +#else\n\ +#define C_FLT128_DIG 0\n\ +#endif\n\ +#else\n\ +#define C_FLT128_DIG 0\n\ +#endif\n\ +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L\n\ +#define C_LDBL_DIG DECIMAL_DIG\n\ +#else\n\ +#define C_LDBL_DIG LDBL_DIG\n\ +#endif\n\nint main() {\nprintf(\"\\%d\\\;\\%d\\\;\", C_LDBL_DIG, C_FLT128_DIG)\\\;\n\nreturn 0\\\;\n}\n + " +) + +C_RUN ("maximum decimal precision for C" ${PROG_SRC} PROG_RES PROG_OUTPUT4) +message (STATUS "Testing maximum decimal precision for C - ${PROG_OUTPUT4}") + +# dnl The output from the above program will be: +# dnl -- long double decimal precision -- __float128 decimal precision + +list (GET PROG_OUTPUT4 0 H5_LDBL_DIG) +list (GET PROG_OUTPUT4 1 H5_FLT128_DIG) + +if (${HDF_PREFIX}_SIZEOF___FLOAT128 EQUAL "0" OR FLT128_DIG EQUAL "0") + set (${HDF_PREFIX}_HAVE_FLOAT128 0) + set (${HDF_PREFIX}_SIZEOF___FLOAT128 0) + set (_PAC_C_MAX_REAL_PRECISION ${H5_LDBL_DIG}) +else () + set (_PAC_C_MAX_REAL_PRECISION ${H5_FLT128_DIG}) +endif () +if (NOT ${_PAC_C_MAX_REAL_PRECISION}) + set (${HDF_PREFIX}_PAC_C_MAX_REAL_PRECISION 0) +else () + set (${HDF_PREFIX}_PAC_C_MAX_REAL_PRECISION ${_PAC_C_MAX_REAL_PRECISION}) +endif () +message (STATUS "maximum decimal precision for C var - ${${HDF_PREFIX}_PAC_C_MAX_REAL_PRECISION}") + +#----------------------------------------------------------------------------- # Macro to determine the various conversion capabilities #----------------------------------------------------------------------------- macro (H5ConversionTests TEST msg) if (NOT DEFINED ${TEST}) - # message (STATUS "===> ${TEST}") TRY_RUN (${TEST}_RUN ${TEST}_COMPILE ${CMAKE_BINARY_DIR} ${HDF_RESOURCES_DIR}/ConversionTests.c @@ -205,19 +343,25 @@ macro (H5ConversionTests TEST msg) OUTPUT_VARIABLE OUTPUT ) if (${TEST}_COMPILE) - if (${TEST}_RUN MATCHES 0) + if (${TEST}_RUN EQUAL "0") set (${TEST} 1 CACHE INTERNAL ${msg}) - message (STATUS "${msg}... yes") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "${msg}... yes") + endif () else () set (${TEST} "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "${msg}... no") + endif () file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log "Test ${TEST} Run failed with the following output and exit code:\n ${OUTPUT}\n" ) endif () else () set (${TEST} "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") + if (CMAKE_VERSION VERSION_GREATER_EQUAL "3.15.0") + message (VERBOSE "${msg}... no") + endif () file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log "Test ${TEST} Compile failed with the following output:\n ${OUTPUT}\n" ) |