summaryrefslogtreecommitdiffstats
path: root/config/cmake/ConversionTests.c
diff options
context:
space:
mode:
Diffstat (limited to 'config/cmake/ConversionTests.c')
-rw-r--r--config/cmake/ConversionTests.c167
1 files changed, 89 insertions, 78 deletions
diff --git a/config/cmake/ConversionTests.c b/config/cmake/ConversionTests.c
index 082dbd4..002bc88 100644
--- a/config/cmake/ConversionTests.c
+++ b/config/cmake/ConversionTests.c
@@ -9,12 +9,23 @@
* If you do not have access to either file, you may request a copy from *
* help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
++
+#if defined(__has_attribute)
+#if __has_attribute(no_sanitize)
+#define HDF_NO_UBSAN __attribute__((no_sanitize("undefined")))
+#else
+#define HDF_NO_UBSAN
+#endif
+#else
+#define HDF_NO_UBSAN
+#endif
+
#ifdef H5_LDOUBLE_TO_LONG_SPECIAL_TEST
#include <string.h>
#include <stdlib.h>
-int main(void)
+int main(void) HDF_NO_UBSAN
{
long double ld = 20041683600089727.779961L;
long ll;
@@ -24,44 +35,44 @@ int main(void)
int ret = 1;
if(sizeof(long double) == 16 && sizeof(long) == 8) {
- /*make sure the long double type has 16 bytes in size and
- * 11 bits of exponent. If it is,
- *the bit sequence should be like below. It's not
- *a decent way to check but this info isn't available. */
- memcpy(s, &ld, 16);
- if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 &&
- s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 &&
- s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) {
-
- /* Assign the hexadecimal value of long double type. */
- s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3;
- s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0;
- s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c;
- s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20;
-
- memcpy(&ld, s, 16);
-
- ll = (long)ld;
- memcpy(s2, &ll, 8);
-
- /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82
- * and gets wrong value 20041683600089730 on the IBM Power6 Linux.
- * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f
- * and gets the correct value 20041683600089727. It uses some special
- * algorithm. We're going to define the macro and skip the test until
- * we can figure out how they do it. */
- if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
- s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
- ret = 0;
-
- ull = (unsigned long)ld;
- memcpy(s2, &ull, 8);
-
- /* The unsigned long is the same as signed long. */
- if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
- s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
- ret = 0;
- }
+ /*make sure the long double type has 16 bytes in size and
+ * 11 bits of exponent. If it is,
+ *the bit sequence should be like below. It's not
+ *a decent way to check but this info isn't available. */
+ memcpy(s, &ld, 16);
+ if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 &&
+ s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 &&
+ s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) {
+
+ /* Assign the hexadecimal value of long double type. */
+ s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3;
+ s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0;
+ s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c;
+ s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20;
+
+ memcpy(&ld, s, 16);
+
+ ll = (long)ld;
+ memcpy(s2, &ll, 8);
+
+ /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82
+ * and gets wrong value 20041683600089730 on the IBM Power6 Linux.
+ * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f
+ * and gets the correct value 20041683600089727. It uses some special
+ * algorithm. We're going to define the macro and skip the test until
+ * we can figure out how they do it. */
+ if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
+ s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
+ ret = 0;
+
+ ull = (unsigned long)ld;
+ memcpy(s2, &ull, 8);
+
+ /* The unsigned long is the same as signed long. */
+ if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
+ s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
+ ret = 0;
+ }
}
done:
@@ -75,7 +86,7 @@ done:
#include <string.h>
#include <stdlib.h>
-int main(void)
+int main(void) HDF_NO_UBSAN
{
long double ld;
long ll;
@@ -86,46 +97,46 @@ int main(void)
/*Determine if long double has 16 byte in size, 11 bit exponent, and
*the bias is 0x3ff */
if(sizeof(long double) == 16) {
- ld = 1.0L;
- memcpy(s, &ld, 16);
- if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
- s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00)
- flag = 1;
+ ld = 1.0L;
+ memcpy(s, &ld, 16);
+ if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
+ s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00)
+ flag = 1;
}
if(flag==1 && sizeof(long)==8) {
- ll = 0x003fffffffffffffL;
- ld = (long double)ll;
- memcpy(s, &ld, 16);
- /* The library converts the value to 0x434fffffffffffff8000000000000000.
- * In decimal it is 18014398509481982.000000, one value short of the original.
- * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000.
- * The value is correct in decimal. It uses some special
- * algorithm. We're going to define the macro and skip the test until
- * we can figure out how they do it. */
- if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 &&
- s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
- s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
- s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
- ret = 0;
+ ll = 0x003fffffffffffffL;
+ ld = (long double)ll;
+ memcpy(s, &ld, 16);
+ /* The library converts the value to 0x434fffffffffffff8000000000000000.
+ * In decimal it is 18014398509481982.000000, one value short of the original.
+ * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000.
+ * The value is correct in decimal. It uses some special
+ * algorithm. We're going to define the macro and skip the test until
+ * we can figure out how they do it. */
+ if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 &&
+ s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
+ s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
+ s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
+ ret = 0;
}
if(flag==1 && sizeof(unsigned long)==8) {
- ull = 0xffffffffffffffffUL;
- ld = (long double)ull;
- memcpy(s, &ld, 16);
- /* Use a different value from signed long to test. The problem is the same
- * for both long and unsigned long. The value is 18446744073709551615.
- * The library converts the value to 0x43effffffffffffffe000000000000000.
- * In decimal it's 18446744073709548544.000000, very different from the original.
- * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000.
- * The value is correct in decimal. It uses some special
- * algorithm. We're going to define the macro and skip the test until
- * we can figure out how they do it. */
- if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
- s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
- s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
- s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
- ret = 0;
+ ull = 0xffffffffffffffffUL;
+ ld = (long double)ull;
+ memcpy(s, &ld, 16);
+ /* Use a different value from signed long to test. The problem is the same
+ * for both long and unsigned long. The value is 18446744073709551615.
+ * The library converts the value to 0x43effffffffffffffe000000000000000.
+ * In decimal it's 18446744073709548544.000000, very different from the original.
+ * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000.
+ * The value is correct in decimal. It uses some special
+ * algorithm. We're going to define the macro and skip the test until
+ * we can figure out how they do it. */
+ if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
+ s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
+ s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
+ s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
+ ret = 0;
}
done:
exit(ret);
@@ -138,7 +149,7 @@ done:
#include <string.h>
#include <stdlib.h>
-int main(void)
+int main(void) HDF_NO_UBSAN
{
long double ld = 20041683600089727.779961L;
long long ll;
@@ -181,7 +192,7 @@ done:
#include <string.h>
#include <stdlib.h>
-int main(void)
+int main(void) HDF_NO_UBSAN
{
long double ld;
long long ll;
@@ -243,7 +254,7 @@ int FC_DUMMY_MAIN()
#endif
#endif
int
-main ()
+main () HDF_NO_UBSAN
{
char *chp = "beefs";