diff options
Diffstat (limited to 'config/cmake')
| -rw-r--r-- | config/cmake/CMakePackageConfigHelpers.cmake | 321 | ||||
| -rw-r--r-- | config/cmake/hdf5-config.cmake.build.in | 73 | ||||
| -rw-r--r-- | config/cmake/hdf5-config.cmake.in (renamed from config/cmake/hdf5-config.cmake.install.in) | 39 |
3 files changed, 343 insertions, 90 deletions
diff --git a/config/cmake/CMakePackageConfigHelpers.cmake b/config/cmake/CMakePackageConfigHelpers.cmake new file mode 100644 index 0000000..c6dc141 --- /dev/null +++ b/config/cmake/CMakePackageConfigHelpers.cmake @@ -0,0 +1,321 @@ +#.rst: +# CMakePackageConfigHelpers +# ------------------------- +# +# Helpers functions for creating config files that can be included by other +# projects to find and use a package. +# +# Adds the :command:`configure_package_config_file()` and +# :command:`write_basic_package_version_file()` commands. +# +# Generating a Package Configuration File +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# .. command:: configure_package_config_file +# +# Create a config file for a project:: +# +# configure_package_config_file(<input> <output> INSTALL_DESTINATION <path> +# [PATH_VARS <var1> <var2> ... <varN>] +# [NO_SET_AND_CHECK_MACRO] +# [NO_CHECK_REQUIRED_COMPONENTS_MACRO] +# [INSTALL_PREFIX <path>]) +# +# +# ``configure_package_config_file()`` should be used instead of the plain +# :command:`configure_file()` command when creating the ``<Name>Config.cmake`` +# or ``<Name>-config.cmake`` file for installing a project or library. It helps +# making the resulting package relocatable by avoiding hardcoded paths in the +# installed ``Config.cmake`` file. +# +# In a ``FooConfig.cmake`` file there may be code like this to make the install +# destinations know to the using project: +# +# .. code-block:: cmake +# +# set(FOO_INCLUDE_DIR "@CMAKE_INSTALL_FULL_INCLUDEDIR@" ) +# set(FOO_DATA_DIR "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" ) +# set(FOO_ICONS_DIR "@CMAKE_INSTALL_PREFIX@/share/icons" ) +# ...logic to determine installedPrefix from the own location... +# set(FOO_CONFIG_DIR "${installedPrefix}/@CONFIG_INSTALL_DIR@" ) +# +# All 4 options shown above are not sufficient, since the first 3 hardcode the +# absolute directory locations, and the 4th case works only if the logic to +# determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR`` +# contains a relative path, which in general cannot be guaranteed. This has the +# effect that the resulting ``FooConfig.cmake`` file would work poorly under +# Windows and OSX, where users are used to choose the install location of a +# binary package at install time, independent from how +# :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time. +# +# Using ``configure_package_config_file`` helps. If used correctly, it makes +# the resulting ``FooConfig.cmake`` file relocatable. Usage: +# +# 1. write a ``FooConfig.cmake.in`` file as you are used to +# 2. insert a line containing only the string ``@PACKAGE_INIT@`` +# 3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use +# ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the +# ``@PACKAGE_INIT@`` line) +# 4. instead of using the normal :command:`configure_file()`, use +# ``configure_package_config_file()`` +# +# +# +# The ``<input>`` and ``<output>`` arguments are the input and output file, the +# same way as in :command:`configure_file()`. +# +# The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where +# the ``FooConfig.cmake`` file will be installed to. This path can either be +# absolute, or relative to the ``INSTALL_PREFIX`` path. +# +# The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the +# variables which contain install destinations. For each of them the macro will +# create a helper variable ``PACKAGE_<var...>``. These helper variables must be +# used in the ``FooConfig.cmake.in`` file for setting the installed location. +# They are calculated by ``configure_package_config_file`` so that they are +# always relative to the installed location of the package. This works both for +# relative and also for absolute locations. For absolute locations it works +# only if the absolute location is a subdirectory of ``INSTALL_PREFIX``. +# +# If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to +# calculate all the relative paths. The ``<path>`` argument must be an absolute +# path. If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX` +# variable will be used instead. The default value is good when generating a +# FooConfig.cmake file to use your package from the install tree. When +# generating a FooConfig.cmake file to use your package from the build tree this +# option should be used. +# +# By default ``configure_package_config_file`` also generates two helper macros, +# ``set_and_check()`` and ``check_required_components()`` into the +# ``FooConfig.cmake`` file. +# +# ``set_and_check()`` should be used instead of the normal ``set()`` command for +# setting directories and file locations. Additionally to setting the variable +# it also checks that the referenced file or directory actually exists and fails +# with a ``FATAL_ERROR`` otherwise. This makes sure that the created +# ``FooConfig.cmake`` file does not contain wrong references. +# When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated +# into the ``FooConfig.cmake`` file. +# +# ``check_required_components(<package_name>)`` should be called at the end of +# the ``FooConfig.cmake`` file if the package supports components. This macro +# checks whether all requested, non-optional components have been found, and if +# this is not the case, sets the ``Foo_FOUND`` variable to ``FALSE``, so that +# the package is considered to be not found. It does that by testing the +# ``Foo_<Component>_FOUND`` variables for all requested required components. +# When using the ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is +# not generated into the ``FooConfig.cmake`` file. +# +# For an example see below the documentation for +# :command:`write_basic_package_version_file()`. +# +# Generating a Package Version File +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# .. command:: write_basic_package_version_file +# +# Create a version file for a project:: +# +# write_basic_package_version_file(<filename> +# [VERSION <major.minor.patch>] +# COMPATIBILITY <AnyNewerVersion|SameMajorVersion|ExactVersion> ) +# +# +# Writes a file for use as ``<package>ConfigVersion.cmake`` file to +# ``<filename>``. See the documentation of :command:`find_package()` for +# details on this. +# +# ``<filename>`` is the output filename, it should be in the build tree. +# ``<major.minor.patch>`` is the version number of the project to be installed. +# +# If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used. +# If this hasn't been set, it errors out. +# +# The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed +# package version will be considered compatible if it is newer or exactly the +# same as the requested version. This mode should be used for packages which +# are fully backward compatible, also across major versions. +# If ``SameMajorVersion`` is used instead, then the behaviour differs from +# ``AnyNewerVersion`` in that the major version number must be the same as +# requested, e.g. version 2.0 will not be considered compatible if 1.0 is +# requested. This mode should be used for packages which guarantee backward +# compatibility within the same major version. +# If ``ExactVersion`` is used, then the package is only considered compatible if +# the requested version matches exactly its own version number (not considering +# the tweak version). For example, version 1.2.3 of a package is only +# considered compatible to requested version 1.2.3. This mode is for packages +# without compatibility guarantees. +# If your project has more elaborated version matching rules, you will need to +# write your own custom ``ConfigVersion.cmake`` file instead of using this +# macro. +# +# Internally, this macro executes :command:`configure_file()` to create the +# resulting version file. Depending on the ``COMPATIBLITY``, either the file +# ``BasicConfigVersion-SameMajorVersion.cmake.in`` or +# ``BasicConfigVersion-AnyNewerVersion.cmake.in`` is used. Please note that +# these two files are internal to CMake and you should not call +# :command:`configure_file()` on them yourself, but they can be used as starting +# point to create more sophisticted custom ``ConfigVersion.cmake`` files. +# +# Example Generating Package Files +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# Example using both :command:`configure_package_config_file` and +# ``write_basic_package_version_file()``: +# +# ``CMakeLists.txt``: +# +# .. code-block:: cmake +# +# set(INCLUDE_INSTALL_DIR include/ ... CACHE ) +# set(LIB_INSTALL_DIR lib/ ... CACHE ) +# set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE ) +# ... +# include(CMakePackageConfigHelpers) +# configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake +# INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake +# PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR) +# write_basic_package_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake +# VERSION 1.2.3 +# COMPATIBILITY SameMajorVersion ) +# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake +# DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake ) +# +# ``FooConfig.cmake.in``: +# +# .. code-block:: cmake +# +# set(FOO_VERSION x.y.z) +# ... +# @PACKAGE_INIT@ +# ... +# set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@") +# set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@") +# +# check_required_components(Foo) + + +#============================================================================= +# Copyright 2012 Alexander Neundorf <neundorf@kde.org> +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +include(CMakeParseArguments) + +include(WriteBasicConfigVersionFile) + +macro(WRITE_BASIC_PACKAGE_VERSION_FILE) + write_basic_config_version_file(${ARGN}) +endmacro() + +function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile) + set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO) + set(oneValueArgs INSTALL_DESTINATION INSTALL_PREFIX) + set(multiValueArgs PATH_VARS ) + + cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) + + if(CCF_UNPARSED_ARGUMENTS) + message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"") + endif() + + if(NOT CCF_INSTALL_DESTINATION) + message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()") + endif() + + if(DEFINED CCF_INSTALL_PREFIX) + if(IS_ABSOLUTE "${CCF_INSTALL_PREFIX}") + set(installPrefix "${CCF_INSTALL_PREFIX}") + else() + message(FATAL_ERROR "INSTALL_PREFIX must be an absolute path") + endif() + else() + set(installPrefix "${CMAKE_INSTALL_PREFIX}") + endif() + + if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}") + set(absInstallDir "${CCF_INSTALL_DESTINATION}") + else() + set(absInstallDir "${installPrefix}/${CCF_INSTALL_DESTINATION}") + endif() + + file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${installPrefix}" ) + + foreach(var ${CCF_PATH_VARS}) + if(NOT DEFINED ${var}) + message(FATAL_ERROR "Variable ${var} does not exist") + else() + if(IS_ABSOLUTE "${${var}}") + string(REPLACE "${installPrefix}" "\${PACKAGE_PREFIX_DIR}" + PACKAGE_${var} "${${var}}") + else() + set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}") + endif() + endif() + endforeach() + + get_filename_component(inputFileName "${_inputFile}" NAME) + + set(PACKAGE_INIT " +####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() ####### +####### Any changes to this file will be overwritten by the next CMake run #### +####### The input file was ${inputFileName} ######## + +get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE) +") + + if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+") + # Handle "/usr move" symlinks created by some Linux distros. + set(PACKAGE_INIT "${PACKAGE_INIT} +# Use original install prefix when loaded through a \"/usr move\" +# cross-prefix symbolic link such as /lib -> /usr/lib. +get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH) +get_filename_component(_realOrig \"${absInstallDir}\" REALPATH) +if(_realCurr STREQUAL _realOrig) + set(PACKAGE_PREFIX_DIR \"${installPrefix}\") +endif() +unset(_realOrig) +unset(_realCurr) +") + endif() + + if(NOT CCF_NO_SET_AND_CHECK_MACRO) + set(PACKAGE_INIT "${PACKAGE_INIT} +macro(set_and_check _var _file) + set(\${_var} \"\${_file}\") + if(NOT EXISTS \"\${_file}\") + message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\") + endif() +endmacro() +") + endif() + + + if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO) + set(PACKAGE_INIT "${PACKAGE_INIT} +macro(check_required_components _NAME) + foreach(comp \${\${_NAME}_FIND_COMPONENTS}) + if(NOT \${_NAME}_\${comp}_FOUND) + if(\${_NAME}_FIND_REQUIRED_\${comp}) + set(\${_NAME}_FOUND FALSE) + endif() + endif() + endforeach() +endmacro() +") + endif() + + set(PACKAGE_INIT "${PACKAGE_INIT} +####################################################################################") + + configure_file("${_inputFile}" "${_outputFile}" @ONLY) + +endfunction() diff --git a/config/cmake/hdf5-config.cmake.build.in b/config/cmake/hdf5-config.cmake.build.in deleted file mode 100644 index 0276ea7..0000000 --- a/config/cmake/hdf5-config.cmake.build.in +++ /dev/null @@ -1,73 +0,0 @@ -#----------------------------------------------------------------------------- -# HDF5 Config file for compiling against hdf5 build directory -#----------------------------------------------------------------------------- -GET_FILENAME_COMPONENT (SELF_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH) - -#----------------------------------------------------------------------------- -# User Options -#----------------------------------------------------------------------------- -set (HDF5_ENABLE_PARALLEL @HDF5_ENABLE_PARALLEL@) -set (HDF5_BUILD_FORTRAN @HDF5_BUILD_FORTRAN@) -set (HDF5_ENABLE_F2003 @HDF5_ENABLE_F2003@) -set (HDF5_BUILD_CPP_LIB @HDF5_BUILD_CPP_LIB@) -set (HDF5_BUILD_TOOLS @HDF5_BUILD_TOOLS@) -set (HDF5_BUILD_HL_LIB @HDF5_BUILD_HL_LIB@) -set (HDF5_ENABLE_Z_LIB_SUPPORT @HDF5_ENABLE_Z_LIB_SUPPORT@) -set (HDF5_ENABLE_SZIP_SUPPORT @HDF5_ENABLE_SZIP_SUPPORT@) -set (HDF5_ENABLE_SZIP_ENCODING @HDF5_ENABLE_SZIP_ENCODING@) -set (HDF5_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@) - -#----------------------------------------------------------------------------- -# Dependencies -#----------------------------------------------------------------------------- -IF(HDF5_ENABLE_PARALLEL) - SET(HDF5_MPI_C_INCLUDE_PATH "@MPI_C_INCLUDE_PATH@") - SET(HDF5_MPI_C_LIBRARIES "@MPI_C_LIBRARIES@") -ENDIF(HDF5_ENABLE_PARALLEL) - -#----------------------------------------------------------------------------- -# Directories -#----------------------------------------------------------------------------- -set (HDF5_INCLUDE_DIR "@HDF5_INCLUDES_BUILD_TIME@" "${HDF5_MPI_C_INCLUDE_PATH}" ) - -if (HDF5_BUILD_FORTRAN) - set (HDF5_INCLUDE_DIR_FORTRAN "@CMAKE_Fortran_MODULE_DIRECTORY@" ) -endif (HDF5_BUILD_FORTRAN) - -if (HDF5_BUILD_CPP_LIB) - set (HDF5_INCLUDE_DIR_CPP ${HDF5_INCLUDE_DIR} ) -endif (HDF5_BUILD_CPP_LIB) - -if (HDF5_BUILD_HL_LIB) - set (HDF5_INCLUDE_DIR_HL ${HDF5_INCLUDE_DIR} ) -endif (HDF5_BUILD_HL_LIB) - -if (HDF5_BUILD_HL_LIB AND HDF5_BUILD_CPP_LIB) - set (HDF5_INCLUDE_DIR_HL_CPP ${HDF5_INCLUDE_DIR} ) -endif (HDF5_BUILD_HL_LIB AND HDF5_BUILD_CPP_LIB) - -if (HDF5_BUILD_TOOLS) - set (HDF5_INCLUDE_DIR_TOOLS ${HDF5_INCLUDE_DIR} ) -endif (HDF5_BUILD_TOOLS) - -if (HDF5_BUILD_SHARED_LIBS) - set (H5_BUILT_AS_DYNAMIC_LIB 1 ) -else (HDF5_BUILD_SHARED_LIBS) - set (H5_BUILT_AS_STATIC_LIB 1 ) -endif (HDF5_BUILD_SHARED_LIBS) - -#----------------------------------------------------------------------------- -# Version Strings -#----------------------------------------------------------------------------- -set (HDF5_VERSION_STRING @HDF5_VERSION_STRING@) -set (HDF5_VERSION_MAJOR @HDF5_VERSION_MAJOR@) -set (HDF5_VERSION_MINOR @HDF5_VERSION_MINOR@) - -#----------------------------------------------------------------------------- -# Don't include targets if this file is being picked up by another -# project which has already build hdf5 as a subproject -#----------------------------------------------------------------------------- -if (NOT TARGET "@HDF5_PACKAGE@") - include (${SELF_DIR}/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) - set (HDF5_LIBRARIES "@HDF5_LIBRARIES_TO_EXPORT@") -endif (NOT TARGET "@HDF5_PACKAGE@") diff --git a/config/cmake/hdf5-config.cmake.install.in b/config/cmake/hdf5-config.cmake.in index c1c4498..79223d1 100644 --- a/config/cmake/hdf5-config.cmake.install.in +++ b/config/cmake/hdf5-config.cmake.in @@ -1,12 +1,7 @@ #----------------------------------------------------------------------------- -# HDF5 Config file for compiling against hdf5 install directory +# HDF5 Config file for compiling against hdf5 build/install directory #----------------------------------------------------------------------------- -GET_FILENAME_COMPONENT (SELF_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH) -GET_FILENAME_COMPONENT(_IMPORT_PREFIX "${SELF_DIR}" PATH) -GET_FILENAME_COMPONENT(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH) -if (NOT WIN32) - GET_FILENAME_COMPONENT(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH) -endif (NOT WIN32) +@PACKAGE_INIT@ #----------------------------------------------------------------------------- # User Options @@ -34,29 +29,38 @@ ENDIF(HDF5_ENABLE_PARALLEL) #----------------------------------------------------------------------------- # Directories #----------------------------------------------------------------------------- -set (HDF5_INCLUDE_DIR "${_IMPORT_PREFIX}/include" "${HDF5_MPI_C_INCLUDE_PATH}" ) +set (HDF5_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@" "${HDF5_MPI_C_INCLUDE_PATH}" ) + +set (HDF5_SHARE_DIR "@PACKAGE_SHARE_INSTALL_DIR@") +set_and_check (HDF5_BUILD_DIR "@PACKAGE_CURRENT_BUILD_DIR@") if (HDF5_BUILD_FORTRAN) - set (HDF5_INCLUDE_DIR_FORTRAN "${_IMPORT_PREFIX}/include" ) + set (HDF5_INCLUDE_DIR_FORTRAN "@PACKAGE_INCLUDE_INSTALL_DIR@" ) endif (HDF5_BUILD_FORTRAN) if (HDF5_BUILD_CPP_LIB) - set (HDF5_INCLUDE_DIR_CPP "${_IMPORT_PREFIX}/include" ) + set (HDF5_INCLUDE_DIR_CPP "@PACKAGE_INCLUDE_INSTALL_DIR@" ) endif (HDF5_BUILD_CPP_LIB) if (HDF5_BUILD_HL_LIB) - set (HDF5_INCLUDE_DIR_HL "${_IMPORT_PREFIX}/include" ) + set (HDF5_INCLUDE_DIR_HL "@PACKAGE_INCLUDE_INSTALL_DIR@" ) endif (HDF5_BUILD_HL_LIB) if (HDF5_BUILD_HL_LIB AND HDF5_BUILD_CPP_LIB) - set (HDF5_INCLUDE_DIR_HL_CPP "${_IMPORT_PREFIX}/include" ) + set (HDF5_INCLUDE_DIR_HL_CPP "@PACKAGE_INCLUDE_INSTALL_DIR@" ) endif (HDF5_BUILD_HL_LIB AND HDF5_BUILD_CPP_LIB) if (HDF5_BUILD_TOOLS) - set (HDF5_INCLUDE_DIR_TOOLS "${_IMPORT_PREFIX}/include" ) - set (HDF5_TOOLS_DIR "${_IMPORT_PREFIX}/bin" ) + set (HDF5_INCLUDE_DIR_TOOLS "@PACKAGE_INCLUDE_INSTALL_DIR@" ) + set_and_check (HDF5_TOOLS_DIR "@PACKAGE_CURRENT_BUILD_DIR@/bin" ) endif (HDF5_BUILD_TOOLS) +if (HDF5_BUILD_SHARED_LIBS) + set (H5_BUILT_AS_DYNAMIC_LIB 1 ) +else (HDF5_BUILD_SHARED_LIBS) + set (H5_BUILT_AS_STATIC_LIB 1 ) +endif (HDF5_BUILD_SHARED_LIBS) + #----------------------------------------------------------------------------- # Version Strings #----------------------------------------------------------------------------- @@ -70,12 +74,13 @@ set (HDF5_VERSION_MINOR @HDF5_VERSION_MINOR@) #----------------------------------------------------------------------------- if (NOT TARGET "@HDF5_PACKAGE@") if (HDF5_ENABLE_Z_LIB_SUPPORT AND HDF5_PACKAGE_EXTLIBS AND NOT TARGET "zlib") - include (${SELF_DIR}/../ZLIB/@ZLIB_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) + include (@PACKAGE_SHARE_INSTALL_DIR@/ZLIB/@ZLIB_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif (HDF5_ENABLE_Z_LIB_SUPPORT AND HDF5_PACKAGE_EXTLIBS AND NOT TARGET "zlib") if (HDF5_ENABLE_SZIP_SUPPORT AND HDF5_PACKAGE_EXTLIBS AND NOT TARGET "szip") - include (${SELF_DIR}/../SZIP/@SZIP_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) + include (@PACKAGE_SHARE_INSTALL_DIR@/SZIP/@SZIP_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif (HDF5_ENABLE_SZIP_SUPPORT AND HDF5_PACKAGE_EXTLIBS AND NOT TARGET "szip") - include (${SELF_DIR}/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) + include (@PACKAGE_SHARE_INSTALL_DIR@/hdf5/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) set (HDF5_LIBRARIES "@HDF5_LIBRARIES_TO_EXPORT@") endif (NOT TARGET "@HDF5_PACKAGE@") +check_required_components(hdf5) |