summaryrefslogtreecommitdiffstats
path: root/config/sanitizer/code-coverage.cmake
diff options
context:
space:
mode:
Diffstat (limited to 'config/sanitizer/code-coverage.cmake')
-rw-r--r--config/sanitizer/code-coverage.cmake536
1 files changed, 536 insertions, 0 deletions
diff --git a/config/sanitizer/code-coverage.cmake b/config/sanitizer/code-coverage.cmake
new file mode 100644
index 0000000..8d765f7
--- /dev/null
+++ b/config/sanitizer/code-coverage.cmake
@@ -0,0 +1,536 @@
+#
+# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+# USAGE: To enable any code coverage instrumentation/targets, the single CMake
+# option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or
+# on the command line.
+#
+# From this point, there are two primary methods for adding instrumentation to
+# targets: 1 - A blanket instrumentation by calling `add_code_coverage()`, where
+# all targets in that directory and all subdirectories are automatically
+# instrumented. 2 - Per-target instrumentation by calling
+# `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only
+# that target is instrumented. This applies to both libraries and executables.
+#
+# To add coverage targets, such as calling `make ccov` to generate the actual
+# coverage information for perusal or consumption, call
+# `target_code_coverage(<TARGET_NAME>)` on an *executable* target.
+#
+# Example 1: All targets instrumented
+#
+# In this case, the coverage information reported will will be that of the
+# `theLib` library target and `theExe` executable.
+#
+# 1a: Via global command
+#
+# ~~~
+# add_code_coverage() # Adds instrumentation to all targets
+#
+# add_library(theLib lib.cpp)
+#
+# add_executable(theExe main.cpp)
+# target_link_libraries(theExe PRIVATE theLib)
+# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports.
+# ~~~
+#
+# 1b: Via target commands
+#
+# ~~~
+# add_library(theLib lib.cpp)
+# target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets.
+#
+# add_executable(theExe main.cpp)
+# target_link_libraries(theExe PRIVATE theLib)
+# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports.
+# ~~~
+#
+# Example 2: Target instrumented, but with regex pattern of files to be excluded
+# from report
+#
+# ~~~
+# add_executable(theExe main.cpp non_covered.cpp)
+# target_code_coverage(theExe EXCLUDE non_covered.cpp test/*) # As an executable target, the reports will exclude the non-covered.cpp file, and any files in a test/ folder.
+# ~~~
+#
+# Example 3: Target added to the 'ccov' and 'ccov-all' targets
+#
+# ~~~
+# add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders.
+#
+# add_executable(theExe main.cpp non_covered.cpp)
+# target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder.
+# ~~~
+
+# Options
+option(
+ CODE_COVERAGE
+ "Builds targets with code coverage instrumentation. (Requires GCC or Clang)"
+ OFF)
+
+# Programs
+find_program(LLVM_COV_PATH llvm-cov)
+find_program(LLVM_PROFDATA_PATH llvm-profdata)
+find_program(LCOV_PATH lcov)
+find_program(GENHTML_PATH genhtml)
+
+# Variables
+set(CMAKE_COVERAGE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/ccov)
+
+# Common initialization/checks
+if(CODE_COVERAGE AND NOT CODE_COVERAGE_ADDED)
+ set(CODE_COVERAGE_ADDED ON)
+
+ # Common Targets
+ add_custom_target(
+ ccov-preprocessing
+ COMMAND ${CMAKE_COMMAND} -E make_directory
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}
+ DEPENDS ccov-clean)
+
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang")
+ # Messages
+ message(STATUS "Building with llvm Code Coverage Tools")
+
+ if(NOT LLVM_COV_PATH)
+ message(FATAL_ERROR "llvm-cov not found! Aborting.")
+ else()
+ # Version number checking for 'EXCLUDE' compatibility
+ execute_process(COMMAND ${LLVM_COV_PATH} --version
+ OUTPUT_VARIABLE LLVM_COV_VERSION_CALL_OUTPUT)
+ string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" LLVM_COV_VERSION
+ ${LLVM_COV_VERSION_CALL_OUTPUT})
+
+ if(LLVM_COV_VERSION VERSION_LESS "7.0.0")
+ message(
+ WARNING
+ "target_code_coverage()/add_code_coverage_all_targets() 'EXCLUDE' option only available on llvm-cov >= 7.0.0"
+ )
+ endif()
+ endif()
+
+ # Targets
+ add_custom_target(
+ ccov-clean
+ COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
+ COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list)
+
+ # Used to get the shared object file list before doing the main all-
+ # processing
+ add_custom_target(
+ ccov-libs
+ COMMAND ;
+ COMMENT "libs ready for coverage report.")
+
+ elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ # Messages
+ message(STATUS "Building with lcov Code Coverage Tools")
+
+ if(CMAKE_BUILD_TYPE)
+ string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
+ if(NOT ${upper_build_type} STREQUAL "DEBUG")
+ message(
+ WARNING
+ "Code coverage results with an optimized (non-Debug) build may be misleading"
+ )
+ endif()
+ else()
+ message(
+ WARNING
+ "Code coverage results with an optimized (non-Debug) build may be misleading"
+ )
+ endif()
+ if(NOT LCOV_PATH)
+ message(FATAL_ERROR "lcov not found! Aborting...")
+ endif()
+ if(NOT GENHTML_PATH)
+ message(FATAL_ERROR "genhtml not found! Aborting...")
+ endif()
+
+ # Targets
+ add_custom_target(ccov-clean COMMAND ${LCOV_PATH} --directory
+ ${CMAKE_BINARY_DIR} --zerocounters)
+
+ else()
+ set(CODE_COVERAGE_ADDED OFF)
+ message(STATUS "Code coverage requires Clang or GCC.(${CMAKE_C_COMPILER_ID})")
+ endif()
+endif()
+
+# Adds code coverage instrumentation to a library, or instrumentation/targets
+# for an executable target.
+# ~~~
+# EXECUTABLE ADDED TARGETS:
+# GCOV/LCOV:
+# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter.
+# ccov-${TARGET_NAME} : Generates HTML code coverage report for the associated named target.
+# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report.
+#
+# LLVM-COV:
+# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter.
+# ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter.
+# ccov-${TARGET_NAME} : Generates HTML code coverage report.
+# ccov-report-${TARGET_NAME} : Prints to command line summary per-file coverage information.
+# ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information.
+# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report.
+# ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line.
+#
+# Required:
+# TARGET_NAME - Name of the target to generate code coverage for.
+# Optional:
+# AUTO - Adds the target to the 'ccov' target so that it can be run in a batch with others easily. Effective on executable targets.
+# ALL - Adds the target to the 'ccov-all' and 'ccov-all-report' targets, which merge several executable targets coverage data to a single report. Effective on executable targets.
+# EXTERNAL - For GCC's lcov, allows the profiling of 'external' files from the processing directory
+# EXCLUDE <REGEX_PATTERNS> - Excludes files of the patterns provided from coverage. **These do not copy to the 'all' targets.**
+# OBJECTS <TARGETS> - For executables ONLY, if the provided targets are shared libraries, adds coverage information to the output
+# ~~~
+function(target_code_coverage TARGET_NAME)
+ # Argument parsing
+ set(options AUTO ALL EXTERNAL)
+ set(multi_value_keywords EXCLUDE OBJECTS)
+ cmake_parse_arguments(target_code_coverage "${options}" ""
+ "${multi_value_keywords}" ${ARGN})
+
+ if(CODE_COVERAGE)
+
+ # Add code coverage instrumentation to the target's linker command
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang")
+ target_compile_options(${TARGET_NAME} PRIVATE -fprofile-instr-generate
+ -fcoverage-mapping)
+ set_property(
+ TARGET ${TARGET_NAME}
+ APPEND_STRING
+ PROPERTY LINK_FLAGS "-fprofile-instr-generate ")
+ set_property(
+ TARGET ${TARGET_NAME}
+ APPEND_STRING
+ PROPERTY LINK_FLAGS "-fcoverage-mapping ")
+ elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ target_compile_options(${TARGET_NAME} PRIVATE -fprofile-arcs
+ -ftest-coverage)
+ target_link_libraries(${TARGET_NAME} PRIVATE gcov)
+ endif()
+
+ # Targets
+ get_target_property(target_type ${TARGET_NAME} TYPE)
+
+ # Add shared library to processing for 'all' targets
+ if(target_type STREQUAL "SHARED_LIBRARY" AND target_code_coverage_ALL)
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang")
+ add_custom_target(
+ ccov-run-${TARGET_NAME}
+ COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >>
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
+ DEPENDS ccov-preprocessing ${TARGET_NAME})
+
+ if(NOT TARGET ccov-libs)
+ message(
+ FATAL_ERROR
+ "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'."
+ )
+ endif()
+
+ add_dependencies(ccov-libs ccov-run-${TARGET_NAME})
+ endif()
+ endif()
+
+ # For executables add targets to run and produce output
+ if(target_type STREQUAL "EXECUTABLE")
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?Cc]lang")
+
+ # If there are shared objects to also work with, generate the string to
+ # add them here
+ foreach(SO_TARGET ${target_code_coverage_OBJECTS})
+ # Check to see if the target is a shared object
+ if(TARGET ${SO_TARGET})
+ get_target_property(SO_TARGET_TYPE ${SO_TARGET} TYPE)
+ if(${SO_TARGET_TYPE} STREQUAL "SHARED_LIBRARY")
+ set(SO_OBJECTS ${SO_OBJECTS} -object=$<TARGET_FILE:${SO_TARGET}>)
+ endif()
+ endif()
+ endforeach()
+
+ # Run the executable, generating raw profile data
+ add_custom_target(
+ ccov-run-${TARGET_NAME}
+ COMMAND LLVM_PROFILE_FILE=${TARGET_NAME}.profraw
+ $<TARGET_FILE:${TARGET_NAME}>
+ COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >>
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
+ COMMAND echo "${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}.profraw " >>
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list
+ DEPENDS ccov-preprocessing ccov-libs ${TARGET_NAME})
+
+ # Merge the generated profile data so llvm-cov can process it
+ add_custom_target(
+ ccov-processing-${TARGET_NAME}
+ COMMAND ${LLVM_PROFDATA_PATH} merge -sparse ${TARGET_NAME}.profraw -o
+ ${TARGET_NAME}.profdata
+ DEPENDS ccov-run-${TARGET_NAME})
+
+ # Ignore regex only works on LLVM >= 7
+ if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0")
+ foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE})
+ set(EXCLUDE_REGEX ${EXCLUDE_REGEX}
+ -ignore-filename-regex='${EXCLUDE_ITEM}')
+ endforeach()
+ endif()
+
+ # Print out details of the coverage information to the command line
+ add_custom_target(
+ ccov-show-${TARGET_NAME}
+ COMMAND
+ ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS}
+ -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions
+ ${EXCLUDE_REGEX}
+ DEPENDS ccov-processing-${TARGET_NAME})
+
+ # Print out a summary of the coverage information to the command line
+ add_custom_target(
+ ccov-report-${TARGET_NAME}
+ COMMAND ${LLVM_COV_PATH} report $<TARGET_FILE:${TARGET_NAME}>
+ ${SO_OBJECTS} -instr-profile=${TARGET_NAME}.profdata
+ ${EXCLUDE_REGEX}
+ DEPENDS ccov-processing-${TARGET_NAME})
+
+ # Generates HTML output of the coverage information for perusal
+ add_custom_target(
+ ccov-${TARGET_NAME}
+ COMMAND
+ ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS}
+ -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions
+ -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}
+ -format="html" ${EXCLUDE_REGEX}
+ DEPENDS ccov-processing-${TARGET_NAME})
+
+ elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ set(COVERAGE_INFO
+ "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}.info")
+
+ # Run the executable, generating coverage information
+ add_custom_target(
+ ccov-run-${TARGET_NAME}
+ COMMAND $<TARGET_FILE:${TARGET_NAME}>
+ DEPENDS ccov-preprocessing ${TARGET_NAME})
+
+ # Generate exclusion string for use
+ foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE})
+ set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO}
+ '${EXCLUDE_ITEM}')
+ endforeach()
+
+ if(EXCLUDE_REGEX)
+ set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file
+ ${COVERAGE_INFO})
+ else()
+ set(EXCLUDE_COMMAND ;)
+ endif()
+
+ if(NOT ${target_code_coverage_EXTERNAL})
+ set(EXTERNAL_OPTION --no-external)
+ endif()
+
+ # Capture coverage data
+ add_custom_target(
+ ccov-capture-${TARGET_NAME}
+ COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO}
+ COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters
+ COMMAND $<TARGET_FILE:${TARGET_NAME}>
+ COMMAND
+ ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory
+ ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file
+ ${COVERAGE_INFO}
+ COMMAND ${EXCLUDE_COMMAND}
+ DEPENDS ccov-preprocessing ${TARGET_NAME})
+
+ # Generates HTML output of the coverage information for perusal
+ add_custom_target(
+ ccov-${TARGET_NAME}
+ COMMAND ${GENHTML_PATH} -o
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}
+ ${COVERAGE_INFO}
+ DEPENDS ccov-capture-${TARGET_NAME})
+ endif()
+
+ add_custom_command(
+ TARGET ccov-${TARGET_NAME}
+ POST_BUILD
+ COMMAND ;
+ COMMENT
+ "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}/index.html in your browser to view the coverage report."
+ )
+
+ # AUTO
+ if(target_code_coverage_AUTO)
+ if(NOT TARGET ccov)
+ add_custom_target(ccov)
+ endif()
+ add_dependencies(ccov ccov-${TARGET_NAME})
+
+ if(NOT CMAKE_COMPILER_IS_GNUCXX)
+ if(NOT TARGET ccov-report)
+ add_custom_target(ccov-report)
+ endif()
+ add_dependencies(ccov-report ccov-report-${TARGET_NAME})
+ endif()
+ endif()
+
+ # ALL
+ if(target_code_coverage_ALL)
+ if(NOT TARGET ccov-all-processing)
+ message(
+ FATAL_ERROR
+ "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'."
+ )
+ endif()
+
+ add_dependencies(ccov-all-processing ccov-run-${TARGET_NAME})
+ endif()
+ endif()
+ endif()
+endfunction()
+
+# Adds code coverage instrumentation to all targets in the current directory and
+# any subdirectories. To add coverage instrumentation to only specific targets,
+# use `target_code_coverage`.
+function(add_code_coverage)
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang")
+ add_compile_options(-fprofile-instr-generate -fcoverage-mapping)
+ add_link_options(-fprofile-instr-generate -fcoverage-mapping)
+ elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ add_compile_options(-fprofile-arcs -ftest-coverage)
+ link_libraries(gcov)
+ endif()
+endfunction()
+
+# Adds the 'ccov-all' type targets that calls all targets added via
+# `target_code_coverage` with the `ALL` parameter, but merges all the coverage
+# data from them into a single large report instead of the numerous smaller
+# reports. Also adds the ccov-all-capture Generates an all-merged.info file, for
+# use with coverage dashboards (e.g. codecov.io, coveralls).
+# ~~~
+# Optional:
+# EXCLUDE <REGEX_PATTERNS> - Excludes files of the regex patterns provided from coverage.
+# ~~~
+function(add_code_coverage_all_targets)
+ # Argument parsing
+ set(multi_value_keywords EXCLUDE)
+ cmake_parse_arguments(add_code_coverage_all_targets "" ""
+ "${multi_value_keywords}" ${ARGN})
+
+ if(CODE_COVERAGE)
+ if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang"
+ OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang")
+
+ # Merge the profile data for all of the run executables
+ add_custom_target(
+ ccov-all-processing
+ COMMAND
+ ${LLVM_PROFDATA_PATH} merge -o
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata -sparse `cat
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list`)
+
+ # Regex exclude only available for LLVM >= 7
+ if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0")
+ foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE})
+ set(EXCLUDE_REGEX ${EXCLUDE_REGEX}
+ -ignore-filename-regex='${EXCLUDE_ITEM}')
+ endforeach()
+ endif()
+
+ # Print summary of the code coverage information to the command line
+ add_custom_target(
+ ccov-all-report
+ COMMAND
+ ${LLVM_COV_PATH} report `cat
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
+ -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
+ ${EXCLUDE_REGEX}
+ DEPENDS ccov-all-processing)
+
+ # Export coverage information so continuous integration tools (e.g.
+ # Jenkins) can consume it
+ add_custom_target(
+ ccov-all-export
+ COMMAND
+ ${LLVM_COV_PATH} export `cat
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
+ -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
+ -format="text" ${EXCLUDE_REGEX} >
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json
+ DEPENDS ccov-all-processing)
+
+ # Generate HTML output of all added targets for perusal
+ add_custom_target(
+ ccov-all
+ COMMAND
+ ${LLVM_COV_PATH} show `cat
+ ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
+ -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
+ -show-line-counts-or-regions
+ -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged
+ -format="html" ${EXCLUDE_REGEX}
+ DEPENDS ccov-all-processing)
+
+ elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ set(COVERAGE_INFO "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.info")
+
+ # Nothing required for gcov
+ add_custom_target(ccov-all-processing COMMAND ;)
+
+ # Exclusion regex string creation
+ foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE})
+ set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO}
+ '${EXCLUDE_ITEM}')
+ endforeach()
+
+ if(EXCLUDE_REGEX)
+ set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file
+ ${COVERAGE_INFO})
+ else()
+ set(EXCLUDE_COMMAND ;)
+ endif()
+
+ # Capture coverage data
+ add_custom_target(
+ ccov-all-capture
+ COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO}
+ COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture
+ --output-file ${COVERAGE_INFO}
+ COMMAND ${EXCLUDE_COMMAND}
+ DEPENDS ccov-all-processing)
+
+ # Generates HTML output of all targets for perusal
+ add_custom_target(
+ ccov-all
+ COMMAND ${GENHTML_PATH} -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged
+ ${COVERAGE_INFO}
+ DEPENDS ccov-all-capture)
+
+ endif()
+
+ add_custom_command(
+ TARGET ccov-all
+ POST_BUILD
+ COMMAND ;
+ COMMENT
+ "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged/index.html in your browser to view the coverage report."
+ )
+ endif()
+endfunction()