summaryrefslogtreecommitdiffstats
path: root/config/sv1-cray
diff options
context:
space:
mode:
Diffstat (limited to 'config/sv1-cray')
-rw-r--r--config/sv1-cray199
1 files changed, 0 insertions, 199 deletions
diff --git a/config/sv1-cray b/config/sv1-cray
deleted file mode 100644
index 1bae48d..0000000
--- a/config/sv1-cray
+++ /dev/null
@@ -1,199 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it
-# requires for proper operation. If CC is unset then this script may
-# set it. If CC is unset by time this script completes then configure
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-# in order to distinguish between different compilers when
-# deciding which compiler command-line switches to use. This
-# variable is set based on the incoming value of $CC and is only
-# used within this file.
-
-if test "X-" = "X-$CC"; then
- CC=cc
- CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS library suitable for use with debugging
-# tools. Usually this list will exclude
-# optimization switches (like `-O') and include
-# switches that turn on symbolic debugging
-# support (like `-g').
-#
-# PROD_CFLAGS Flags to pass to the compiler to create a
-# PROD_CPPFLAGS production version of the library. These
-# usualy exclude symbolic debugging switches
-# (like `-g') and include optimization switches
-# (like `-O').
-#
-# PROFILE_CFLAGS Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS library suitable for performance testing (like
-# `-pg'). This may or may not include debugging
-# or production flags.
-#
-# H5_CFLAGS Flags can be added to this variable which
-# might already be partially initialized. These
-# flags will always be passed to the compiler
-# and should include switches to turn on full
-# warnings. HDF5 attempts to be ANSI and Posix
-# compliant and employ good programming
-# practices resulting in few if any
-# warnings.
-#
-# Warning flags do not have to be added to H5_CFLAGS
-# variable if the compiler is the GNU gcc
-# compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS Flags added directly into this variable will
-# be propogated to the compiler wrapper scripts (h5cc,
-# h5c++, et cetera) in addition to being used to compile
-# the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler. You can try using `-v' or
-# `--version' to see if the compiler will print a version string. You
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
- gcc)
- H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- cc)
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CFLAGS="-g -h zero"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -ansi"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'. For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set the flag to indicate that converting denormalized floating-point
-# values doesn't work.
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
- FC=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS -dp"
- DEBUG_FCFLAGS="-dp"
- PROD_FCFLAGS="-dp"
- PROFILE_FCFLAGS="-dp"
- f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
- CXX="CC"
- CXX_BASENAME=CC
-fi
-
-
-case $CXX_BASENAME in
- g++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CXXFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS -h instantiate=used"
- DEBUG_CXXFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac