diff options
Diffstat (limited to 'config')
33 files changed, 152 insertions, 1867 deletions
diff --git a/config/BlankForm b/config/BlankForm index a70762c..31116bf 100644 --- a/config/BlankForm +++ b/config/BlankForm @@ -72,7 +72,7 @@ fi # `-pg'). This may or may not include debugging # or production flags. # -# CFLAGS Flags can be added to this variable which +# H5_CFLAGS Flags can be added to this variable which # might already be partially initialized. These # flags will always be passed to the compiler # and should include switches to turn on full @@ -81,16 +81,14 @@ fi # practices resulting in few if any # warnings. # -# Warning flags do not have to be added to CFLAGS +# Warning flags do not have to be added to H5_CFLAGS # variable if the compiler is the GNU gcc # compiler or a descendent of gcc such as EGCS or PGCC. # -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# +# AM_CFLAGS Flags added directly into this variable will +# be propogated to the compiler wrapper scripts (h5cc, +# h5c++, et cetera) in addition to being used to compile +# the library. # # These flags should be set according to the compiler being used. # There are two ways to check the compiler. You can try using `-v' or @@ -101,7 +99,7 @@ fi case $CC_BASENAME in gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions DEBUG_CFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CFLAGS="-O3 -fomit-frame-pointer" @@ -111,7 +109,7 @@ case $CC_BASENAME in ;; *) - CFLAGS="$CFLAGS -ansi" + H5_CFLAGS="$H5_CFLAGS -ansi" DEBUG_CFLAGS="-g" DEBUG_CPPFLAGS= PROD_CFLAGS="-O" diff --git a/config/apple b/config/apple index 14504bb..8c4cc8e 100644 --- a/config/apple +++ b/config/apple @@ -28,54 +28,30 @@ fi # Figure out compiler flags . $srcdir/config/gnu-flags - -# The default Fortran 90 compiler + +. $srcdir/config/intel-flags if test "X-" = "X-$FC"; then - # Assume Absoft compiler - FC=xlf - FC_BASENAME=xlf - else - - # Neither xlf nor f95 have a working "version" command. - # If FC is set, try to guess which one is being used by examining - # the last element in the path to the compiler. - - TEMP_BASENAME=`basename $FC` - if test "xlf" = "${TEMP_BASENAME}"; then - FC_BASENAME=xlf - else - FC_BASENAME=f95 - fi + case $CC_BASENAME in + gcc*) + FC=gfortran + FC_BASENAME=gfortran + ;; + icc*) + FC=ifort + FC_BASENAME=ifort + ;; + esac fi - -case $FC_BASENAME in - xlf) - F9XSUFFIXFLAG="-qsuffix=f=f90 -qfree=f90" - FCFLAGS="$FCFLAGS ${F9XSUFFIXFLAG}" - H5_FCFLAGS="$H5_FCFLAGS -qmoddir=./ " - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FCFLAGS="-g" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-g" - f9x_flags_set=yes - ;; - - f95) - - F9XSUFFIXFLAG="" -# We force compiler to use upper case for external names -# (just in case since this should be a default EIP) - H5_FCFLAGS="$H5_FCFLAGS" - FSEARCH_DIRS="" - DEBUG_FCFLAGS="-g" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-g -pg" - f9x_flags_set=yes - -# f95 doesn't support shared libraries - echo ' warning: shared libraries are not supported for f95!' - echo ' disabling shared libraries' +# Figure out compiler flags +. $srcdir/config/gnu-fflags + +. $srcdir/config/intel-fflags + +# Fortran doesn't work with shared libraries +# +if test "X-" != "X-$enable_fortran"; then + echo ' Warning: shared libraries are not supported with Fortran' + echo ' Disabling shared libraries' enable_shared="no" - ;; +fi -esac diff --git a/config/commence.am b/config/commence.am index e5e4de9..667dbb2 100644 --- a/config/commence.am +++ b/config/commence.am @@ -55,13 +55,15 @@ H5FC_PP=$(bindir)/h5pfc H5CPP=$(bindir)/h5c++ -# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5, -# but which shouldn't be exported to h5cc for building other programs. - -CFLAGS=@CFLAGS@ @H5_CFLAGS@ -CPPFLAGS=@CPPFLAGS@ @H5_CPPFLAGS@ -FCFLAGS=@FCFLAGS@ @H5_FCFLAGS@ -CXXFLAGS=@CXXFLAGS@ @H5_CXXFLAGS@ +# H5_CFLAGS holds flags that should be used when building hdf5, +# but which should not be exported to h5cc for building other programs. +# AM_CFLAGS is an automake construct which should be used by Makefiles +# instead of CFLAGS, as CFLAGS is reserved solely for the user to define. + +AM_CFLAGS=@AM_CFLAGS@ @H5_CFLAGS@ +AM_FCFLAGS=@AM_FCFLAGS@ @H5_FCFLAGS@ +AM_CXXFLAGS=@AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_CPPFLAGS=@AM_CPPFLAGS@ @H5_CPPFLAGS@ # The trace script; this is used on source files from the C library to # insert tracing macros. diff --git a/config/craynv b/config/craynv index 9371ac3..479d5c8 100644 --- a/config/craynv +++ b/config/craynv @@ -68,25 +68,23 @@ RANLIB=: # `-pg'). This may or may not include debugging # or production flags. # -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. +# H5_CFLAGS Flags can be added to this variable which +# might already be partially initialized. These +# flags will always be passed to the compiler +# and should include switches to turn on full +# warnings. HDF5 attempts to be ANSI and Posix +# compliant and employ good programming +# practices resulting in few if any +# warnings. # -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. +# Warning flags do not have to be added to H5_CFLAGS +# variable if the compiler is the GNU gcc +# compiler or a descendent of gcc such as EGCS or PGCC. # -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# +# AM_CFLAGS Flags added directly into this variable will +# be propogated to the compiler wrapper scripts (h5cc, +# h5c++, et cetera) in addition to being used to compile +# the library. # # These flags should be set according to the compiler being used. # There are two ways to check the compiler. You can try using `-v' or @@ -162,7 +160,7 @@ if test "X-" = "X-$f9x_flags_set"; then # The -em flag enables .mod files, which is what HDF5 builds. F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -em" + H5_FCFLAGS="$H5_FCFLAGS -em" DEBUG_FCFLAGS="-g" PROD_FCFLAGS="" PROFILE_FCFLAGS="" diff --git a/config/dec-flags b/config/dec-flags index fe9ee87..8f3fa1a 100644 --- a/config/dec-flags +++ b/config/dec-flags @@ -26,7 +26,7 @@ # if test X = "X$cc_flags_set"; then cc_vendor=DEC - cc_version="`$CC $CFLAGS -V 2>&1 |head -1`" + cc_version="`$CC $CFLAGS $H5_CFLAGS -V 2>&1 |head -1`" case "$cc_version" in DEC*) cc_version="`echo $cc_version |\ @@ -111,7 +111,7 @@ fi if test "X-" = "X-$f9x_flags_set"; then F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -Olimit 2048 -std1" + H5_FCFLAGS="$H5_FCFLAGS -Olimit 2048 -std1" DEBUG_FCFLAGS="-Olimit 2048 -std1" PROD_FCFLAGS="-Olimit 2048 -std1" PROFILE_FCFLAGS="-Olimit 2048 -std1" @@ -128,7 +128,7 @@ fi case $CXX_BASENAME in g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions DEBUG_CXXFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O3 -fomit-frame-pointer" @@ -138,7 +138,7 @@ case $CXX_BASENAME in ;; *) - CXXFLAGS="$CXXFLAGS -tlocal -D__USE_STD_IOSTREAM" + H5_CXXFLAGS="$H5_CXXFLAGS -tlocal -D__USE_STD_IOSTREAM" DEBUG_CXXFLAGS="-g" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O" diff --git a/config/dec-osf4.x b/config/dec-osf4.x deleted file mode 100644 index 3b93ed9..0000000 --- a/config/dec-osf4.x +++ /dev/null @@ -1,37 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for detailed information. - -# The default compiler is `cc' -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi - -# Try GNU compiler flags. -. $srcdir/config/gnu-flags - -# Try native DEC compiler -ARCH=${ARCH:='-arch host -tune host'} -. $srcdir/config/dec-flags -# DEC MPI-IO implementation has a bug, -#it cannot generate correct MPI derived datatype. -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} diff --git a/config/dec-osf5.x b/config/dec-osf5.x deleted file mode 100644 index 2d875ff..0000000 --- a/config/dec-osf5.x +++ /dev/null @@ -1,40 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for detailed information. - -# The default compiler is `cc' -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi - -# Try GNU compiler flags. -. $srcdir/config/gnu-flags - -# Try native DEC compiler -ARCH=${ARCH:='-arch host -tune host'} -. $srcdir/config/dec-flags - -# DEC MPI-IO implementation has a bug, it cannot generate correct MPI -# derived datatype. -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} -# It does not do all collective IO correctly. -hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'} diff --git a/config/freebsd b/config/freebsd index 8f2e5e4..7452ff0 100644 --- a/config/freebsd +++ b/config/freebsd @@ -68,7 +68,7 @@ fi if test "X-" != "X-$enable_threadsafe"; then H5_CFLAGS="$H5_CFLAGS -D_THREAD_SAFE" H5_CXXFLAGS="$H5_CXXFLAGS -D_THREAD_SAFE" - LDFLAGS="$LDFLAGS -pthread" + AM_LDFLAGS="$AM_LDFLAGS -pthread" fi # Temporarily hard set this variable. The problem of loss of the last 2 bytes of mantissa diff --git a/config/hpux11.00 b/config/hpux11.00 deleted file mode 100644 index 1a80091..0000000 --- a/config/hpux11.00 +++ /dev/null @@ -1,101 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Shared libraries don't work for all compilers under HPUX11.00. This is a -# known bug in libtool (as of June 2006). -# Disable shared libraries until we can be sure they work. -enable_shared="${enable_shared:-no}" - -# Default compiler is `cc' -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi - -# Flags -case "X-$CC" in - X-gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -Ae -Wp,-H65536" #increase the size of macro definition table. For test/dtypes.c - DEBUG_CFLAGS=-g - DEBUG_CPPFLAGS="-Ae" - PROD_CFLAGS=-O - PROD_CPPFLAGS="-Ae" - PROFILE_CFLAGS= - PROFILE_CPPFLAGS="-Ae" - ;; -esac - -# The default Fortran 90 compiler - -if test "X$FC" = "X"; then - FC=f90 -fi - -if test "X$f9x_flags_set" = "X"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -O" - DEBUG_FCFLAGS="-O" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-O" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX=aCC - CXX_BASENAME=aCC -fi - -case "X-$CXX" in - X-aCC) - # +Z for PIC, +A for using archived libraries - CXXFLAGS="$CXXFLAGS +Z +A -D_INCLUDE_LONGLONG" - CFLAGS="$CFLAGS -g +O2" - DEBUG_CXXFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -D_INCLUDE_LONGLONG" - CFLAGS="$CFLAGS" - DEBUG_CXXFLAGS= - DEBUG_CPPFLAGS= - PROD_CXXFLAGS= - PROD_CPPFLAGS= - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/hpux11.23 b/config/hpux11.23 index 0e3bc2a..339cc84 100644 --- a/config/hpux11.23 +++ b/config/hpux11.23 @@ -29,7 +29,7 @@ fi # Flags case "X-$CC" in X-gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions DEBUG_CFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CFLAGS="-O3" @@ -39,7 +39,7 @@ case "X-$CC" in ;; *) - CFLAGS="$CFLAGS -Ae -Wp,-H65536" #increase the size of macro definition table. For test/dtypes.c + H5_CFLAGS="$H5_CFLAGS -Ae -Wp,-H65536" #increase the size of macro definition table. For test/dtypes.c DEBUG_CFLAGS=-g DEBUG_CPPFLAGS="-Ae" PROD_CFLAGS=-O @@ -58,7 +58,7 @@ fi if test "X$f9x_flags_set" = "X"; then F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -O" + H5_FCFLAGS="$H5_FCFLAGS -O" DEBUG_FCFLAGS="-O" PROD_FCFLAGS="-O" PROFILE_FCFLAGS="-O" @@ -75,8 +75,8 @@ fi case "X-$CXX" in X-aCC) # +Z for PIC - CXXFLAGS="$CXXFLAGS +Z -D_INCLUDE_LONGLONG" - CFLAGS="$CFLAGS -g +O2" + H5_CXXFLAGS="$H5_CXXFLAGS +Z -D_INCLUDE_LONGLONG" + H5_CFLAGS="$H5_CFLAGS -g +O2" DEBUG_CXXFLAGS=-g DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O -s" @@ -85,8 +85,8 @@ case "X-$CXX" in ;; *) - CXXFLAGS="$CXXFLAGS -D_INCLUDE_LONGLONG" - CFLAGS="$CFLAGS" + H5_CXXFLAGS="$H5_CXXFLAGS -D_INCLUDE_LONGLONG" + H5_CFLAGS="$H5_CFLAGS" DEBUG_CXXFLAGS= DEBUG_CPPFLAGS= PROD_CXXFLAGS= diff --git a/config/i686-pc-cygwin b/config/i686-pc-cygwin index 555d9cd..a51adc3 100644 --- a/config/i686-pc-cygwin +++ b/config/i686-pc-cygwin @@ -94,12 +94,12 @@ case $FC_BASENAME in # f95) # Set required flag for compiling C stubs - CFLAGS="$CFLAGS -DH5_ABSOFT" + H5_CFLAGS="$H5_CFLAGS -DH5_ABSOFT" F9XSUFFIXFLAG="" # We force compiler to use upper case for external names # (just in case since this should be a default EIP) - FCFLAGS="$FCFLAGS -YEXT_NAMES=UCS" + H5_FCFLAGS="$H5_FCFLAGS -YEXT_NAMES=UCS" FSEARCH_DIRS="" DEBUG_FCFLAGS="-g" PROD_FCFLAGS="-O" diff --git a/config/ia64-linux-gnu b/config/ia64-linux-gnu index 9bebd37..1961119 100644 --- a/config/ia64-linux-gnu +++ b/config/ia64-linux-gnu @@ -50,7 +50,7 @@ case $CC_BASENAME in ;; *) - CFLAGS="$CFLAGS -ansi" + H5_CFLAGS="$H5_CFLAGS -ansi" DEBUG_CFLAGS="-g" DEBUG_CPPFLAGS= PROD_CFLAGS="-O" @@ -76,7 +76,7 @@ case $FC in # this is for efc v7. Older efc do not work with these. # -Vaxlib is for non-standard fortran calls like exit(). MORE_FCFLAGS='-fpp -DDEC$=DEC_ -DMS$=MS_ -Vaxlib' - FCFLAGS="$FCFLAGS $MORE_FCFLAGS" + H5_FCFLAGS="$H5_FCFLAGS $MORE_FCFLAGS" f9x_flags_set=yes ;; @@ -89,7 +89,7 @@ esac if test "X$f9x_flags_set" = "X"; then F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS" + H5_FCFLAGS="$H5_FCFLAGS" DEBUG_FCFLAGS="" PROD_FCFLAGS="" PROFILE_FCFLAGS="" @@ -113,7 +113,7 @@ fi case $CXX_BASENAME in ecc|icc) # Intel compilers # Default to C99 standard. - CXXFLAGS="${CXXFLAGS:--std=c99}" + H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}" DEBUG_CXXFLAGS="-g -w2 -Wall" DEBUG_CPPFLAGS= PROD_CXXFLAGS="" #Default optimization O2 is used @@ -122,7 +122,7 @@ case $CXX_BASENAME in PROFILE_CPPFLAGS= ;; g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions DEBUG_CXXFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O3 -fomit-frame-pointer" @@ -133,7 +133,7 @@ case $CXX_BASENAME in *) # Default to C99 standard. - CXXFLAGS="${CXXFLAGS:--std=c99}" + H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}" DEBUG_CXXFLAGS="-g" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O" @@ -146,8 +146,8 @@ esac # Check MPICH settings . $srcdir/config/mpich #Uncomment the next line if your system doesn't support MPI complex derived datatype. -#hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} +#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'} #Comment out the following line if your system supports collective IO when some processes #don't have any contributions to IOs. -hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'} +hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'} diff --git a/config/intel-fflags b/config/intel-fflags index 998e569..3e33fc9 100644 --- a/config/intel-fflags +++ b/config/intel-fflags @@ -70,7 +70,7 @@ if test "X-ifort" = "X-$f9x_vendor"; then FC_BASENAME=ifort F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS" + H5_FCFLAGS="$H5_FCFLAGS" # Production PROD_FCFLAGS="-O3" diff --git a/config/intel-osf1 b/config/intel-osf1 deleted file mode 100644 index 27d89cf..0000000 --- a/config/intel-osf1 +++ /dev/null @@ -1,180 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# This is for the ASCI RED TFLOPS machine - -# The default compiler is `cicc' -if test "X-" = "X-$CC"; then - CC=cicc - CC_BASENAME=cicc -fi - -# The default archiver is `xar' -AR=${AR:-xar} - -# There is no ranlib -RANLIB=: - -# Additional libraries -LIBS="$LIBS -lnoop_stubs" - -# How to run serial and parallel test programs -# Default parallel tests can fit within 1 processor in -proc 3 mode. -# You may want to use -proc 3 to use fewer physical nodes. -RUNSERIAL=${RUNSERIAL:-"yod -sz 1"} -RUNPARALLEL=${RUNPARALLEL:-"yod -sz 8"} - -# CFLAGS must be set else configure set it to -g -CFLAGS="$CFLAGS" - -# What must *always* be present for things to compile correctly? -# -DH5_TFLOPS: for the Sandia Tflops machine. Had used the builtin -# __PUMAGON__ but H5_TFLOPS is more meaningful. -CPPFLAGS="$CPPFLAGS -DH5_TFLOPS" - -# What compiler flags should be used for code development? -DEBUG_CFLAGS=-g -DEBUG_CPPFLAGS= - -# What compiler flags should be used for building a production -# library? -PROD_CFLAGS=-O -PROD_CPPFLAGS= - -# What compiler flags enable code profiling? -PROFILE_CFLAGS=-pg -PROFILE_CPPFLAGS= - -# Turn off shared lib option. It does not work for TFLOPS yet. -enable_shared="${enable_shared:-no}" - -# Disable stream-vfd option. It does not work for TFLOPS. -enable_stream_vfd="${enable_stream_vfd:-no}" - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Cache the sizeof of the following types to save configure time. -# These are verified in test/tconfig in case they change. -ac_cv_type_char=${ac_cv_type_char=yes} -ac_cv_sizeof_char=${ac_cv_sizeof_char='1'} -ac_cv_type_short=${ac_cv_type_short=yes} -ac_cv_sizeof_short=${ac_cv_sizeof_short='2'} -ac_cv_type_int=${ac_cv_type_int=yes} -ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} -ac_cv_type_long=${ac_cv_type_long=yes} -ac_cv_sizeof_long=${ac_cv_sizeof_long='4'} -ac_cv_type_float=${ac_cv_type_float=yes} -ac_cv_sizeof_float=${ac_cv_sizeof_float='4'} -ac_cv_type_double=${ac_cv_type_double=yes} -ac_cv_sizeof_double=${ac_cv_sizeof_double='8'} -ac_cv_type_long_double=${ac_cv_type_long_double=yes} -ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double='8'} -ac_cv_type_long_long=${ac_cv_type_long_long=yes} -ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long='8'} -ac_cv_type_size_t=${ac_cv_type_size_t=yes} -ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t='4'} -ac_cv_type_ssize_t=${ac_cv_type_ssize_t=yes} -ac_cv_sizeof_ssize_t=${ac_cv_sizeof_ssize_t='4'} -ac_cv_type_off_t=${ac_cv_type_off_t=yes} -ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t='4'} - -# Hard set sizeof of the following types to 0 because they are not supported. -ac_cv_type___int64=${ac_cv_type___int64=no} -ac_cv_sizeof___int64=${ac_cv_sizeof___int64='0'} - -# Hard set malloc of zero bytes to no because it does not work. -hdf5_cv_malloc_works=${hdf5_cv_malloc_works='no'} - -# Hard set sizeof_intN_t to 0 because they are not supported. -ac_cv_type_int8_t=${ac_cv_type_int8_t=no} -ac_cv_type_int16_t=${ac_cv_type_int16_t=no} -ac_cv_type_int32_t=${ac_cv_type_int32_t=no} -ac_cv_type_int64_t=${ac_cv_type_int64_t=no} -ac_cv_type_uint8_t=${ac_cv_type_uint8_t=no} -ac_cv_type_uint16_t=${ac_cv_type_uint16_t=no} -ac_cv_type_uint32_t=${ac_cv_type_uint32_t=no} -ac_cv_type_uint64_t=${ac_cv_type_uint64_t=no} -ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='0'} -ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='0'} -ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='0'} -ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='0'} -ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='0'} -ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='0'} -ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='0'} -ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='0'} - -# Hard set sizeof_int_leastN_t to 0 because they are not supported. -ac_cv_type_int_least8_t=${ac_cv_type_int_least8_t=no} -ac_cv_type_int_least16_t=${ac_cv_type_int_least16_t=no} -ac_cv_type_int_least32_t=${ac_cv_type_int_least32_t=no} -ac_cv_type_int_least64_t=${ac_cv_type_int_least64_t=no} -ac_cv_type_uint_least8_t=${ac_cv_type_uint_least8_t=no} -ac_cv_type_uint_least16_t=${ac_cv_type_uint_least16_t=no} -ac_cv_type_uint_least32_t=${ac_cv_type_uint_least32_t=no} -ac_cv_type_uint_least64_t=${ac_cv_type_uint_least64_t=no} -ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='0'} -ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='0'} -ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='0'} -ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='0'} -ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='0'} -ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='0'} -ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='0'} -ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='0'} - -# Hard set sizeof_int_fastN_t to 0 because they are not supported. -ac_cv_type_int_fast8_t=${ac_cv_type_int_fast8_t=no} -ac_cv_type_int_fast16_t=${ac_cv_type_int_fast16_t=no} -ac_cv_type_int_fast32_t=${ac_cv_type_int_fast32_t=no} -ac_cv_type_int_fast64_t=${ac_cv_type_int_fast64_t=no} -ac_cv_type_uint_fast8_t=${ac_cv_type_uint_fast8_t=no} -ac_cv_type_uint_fast16_t=${ac_cv_type_uint_fast16_t=no} -ac_cv_type_uint_fast32_t=${ac_cv_type_uint_fast32_t=no} -ac_cv_type_uint_fast64_t=${ac_cv_type_uint_fast64_t=no} -ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='0'} -ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='0'} -ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='0'} -ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='0'} -ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='0'} -ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='0'} -ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='0'} -ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='0'} - -hdf5_cv_system_scope_threads=${hdf5_cv_system_scope_threads="no"} - -# Hard set MPI_File_set_size() working for files over 2GB to no -hdf5_cv_mpi_file_set_size_big=${hdf5_cv_mpi_file_set_size_big='no'} - -# Hard set variables for v1.7 and higher. -# Set gettimeofday_tz to yes. -hdf5_cv_gettimeofday_tz=${hdf5_cv_gettimeofday_tz='yes'} -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} -hdf5_cv_fp_to_ullong_bottom_bit_works=${hdf5_cv_fp_to_ullong_bottom_bit_works='no'} -hdf5_cv_fp_to_ullong_right_maximum=${hdf5_cv_fp_to_ullong_right_maximum='yes'} -hdf5_cv_ldouble_to_uint_works=${hdf5_cv_ldouble_to_uint_works='yes'} -hdf5_cv_sw_ldouble_to_integer_works=${hdf5_cv_sw_ldouble_to_integer_works='yes'} -hdf5_cv_sw_ulong_to_fp_bottom_bit_works=${hdf5_cv_sw_ulong_to_fp_bottom_bit_works='no'} -hdf5_cv_ullong_to_fp_cast_works=${hdf5_cv_ullong_to_fp_cast_works='yes'} -hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_works='yes'} -hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'} diff --git a/config/irix5.x b/config/irix5.x deleted file mode 100644 index bd8a3be..0000000 --- a/config/irix5.x +++ /dev/null @@ -1,94 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details - -# Disable dependency tracking on IRIX unless the user specifically asks for -# it. -# IRIX's pmake confuses automake (as of version 1.9) if dependency tracking -# is enabled and it is not an in-place build. Simply disabling dependency -# tracking on IRIX is simpler to implement than detecting pmake, detecting -# when a build is not in-place, and then disabling dependency tracking. -if test -z "${enable_dependency_tracking}"; then - enable_dependency_tracking="no" -fi - -# The default compiler is `cc' and there is no ranlib. -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -RANLIB=: - -case "X-$CC_BASENAME" in - X-gcc) - H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - # Do *not* use -ansi because it prevents hdf5 from being able - # to read modification dates from the file. On some systems it - # can also result in compile errors in system header files - # since hdf5 includes a couple non-ANSI header files. - #CFLAGS="$CFLAGS -ansi" - - # Always turn off these compiler warnings: - H5_CFLAGS="$H5_CFLAGS -woff 799" - - # Extra debugging flags - DEBUG_CFLAGS=-g - DEBUG_CPPFLAGS= - - # Extra production flags - # Note: higher optimizations relax alignment requirements needed. - PROD_CFLAGS="-O -s" - PROD_CPPFLAGS= - - # Extra profiling flags - PROFILE_CFLAGS=-pg - PROFILE_CPPFLAGS= - ;; -esac - -# Hard set flag to indicate that the 'unsigned long long' to floating-point -# value conversion are broken by the compilers (as of 4/27/04 - QAK) -hdf5_cv_ulong_to_fp_bottom_bit_accurate=${hdf5_cv_ulong_to_fp_bottom_bit_accurate='no'} - -# Set flags to avoid conversion between 'long double' and integers because of -# SGI's compiler problems. For both IRIX64 6.5 and IRIX 6.5, the compilers -# have the following problems, -# long double -> signed char : incorrect rounding -# long double -> unsigned char : incorrect rounding -# long double -> short : incorrect rounding -# long double -> unsigned short : incorrect rounding -# long double -> long or long long: incorrect value -# long double -> unsigned long or long long : incorrect value -# -# long or long long -> long double : correct value but incorrect bit pattern -# unsigned long or long long -> long double : correct value but incorrect bit pattern -# (1/5/05 - SLU) -hdf5_cv_ldouble_to_integer_accurate=${hdf5_cv_ldouble_to_integer_accurate='no'} -hdf5_cv_integer_to_ldouble_accurate=${hdf5_cv_integer_to_ldouble_accurate='no'} diff --git a/config/irix6.x b/config/irix6.x index 05b308c..9bd9c4c 100644 --- a/config/irix6.x +++ b/config/irix6.x @@ -73,14 +73,14 @@ case "X-$CC_BASENAME" in # 1429: the `long long' type is not standard # 1685: turn off warnings about turning off invalid warnings # 3201: remark - parameter not referenced - #CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201" + #H5_CFLAGS="$H5_CFLAGS -woff 1174,1429,1209,1196,1685,3201" H5_CFLAGS="$H5_CFLAGS -woff 1209,3201" # Always turn off these compiler warnings for the old compiler: # 799: the `long long' type is not standard # 803: turn off warnings about turning off invalid warnings # 835: __vfork() (this is an SGI config problem) - #CFLAGS="$CFLAGS -woff 799,803,835" + #H5_CFLAGS="$H5_CFLAGS -woff 799,803,835" # Always turn off these loader warnings: # (notice the peculiar syntax) @@ -133,7 +133,7 @@ fi if test -z "$cxx_flags_set"; then # -LANG:std required for std use; -ptused causes templates used to be # instantiated - CPPFLAGS="$CPPFLAGS -LANG:std" + AM_CPPFLAGS="$AM_CPPFLAGS -LANG:std" H5_CPPFLAGS="$H5_CPPFLAGS -ptused" # libCio is a default library, since libtool before 1.5 doesn't fully @@ -176,18 +176,18 @@ hdf5_cv_integer_to_ldouble_accurate=${hdf5_cv_integer_to_ldouble_accurate='no'} # Versions 7.4.2m or newer work. # Up to version 7.4.4m, it cannot handle collective IO with non-contribution # of some processes. -# Fix $hdf5_mpi_complex_derived_datatype_works if it is not set and is using cc. -if [ -z "$hdf5_mpi_complex_derived_datatype_works" -a $CC_BASENAME = cc ]; then +# Fix $hdf5_cv_mpi_complex_derived_datatype_works if it is not set and is using cc. +if [ -z "$hdf5_cv_mpi_complex_derived_datatype_works" -a $CC_BASENAME = cc ]; then ccversion=`$CC -version 2>&1 | sed -e 's/.*Version //p'` ccversion1=`echo $ccversion | cut -f1 -d.` ccversion2=`echo $ccversion | cut -f2 -d.` # Assume all versions 7.4.* or newer are okay # and assume ccversion2 is never larger than 99. ccversionval=`expr $ccversion1 \* 100 + $ccversion2` - hdf5_mpi_special_collective_io_works='no' + hdf5_cv_mpi_special_collective_io_works='no' if [ $ccversionval -lt 704 ]; then - hdf5_mpi_complex_derived_datatype_works='no' -# hdf5_mpi_special_collective_io_works='no' + hdf5_cv_mpi_complex_derived_datatype_works='no' +# hdf5_cv_mpi_special_collective_io_works='no' fi fi diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1 index 8c64734..667f04e 100644 --- a/config/linux-gnulibc1 +++ b/config/linux-gnulibc1 @@ -122,12 +122,12 @@ fi # 1. collective I/O when some processes don't have any contributions; # 2. complex derived MPI data type. if test $CC_BASENAME = cmpicc; then - hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'} - hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} + hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'} + hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'} fi #Comment out the following line if your system supports collective IO when some processes #don't have any contributions to IOs. -hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'} -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} +hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'} +hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'} diff --git a/config/lt_vers.am b/config/lt_vers.am index 79406bb..f784c48 100644 --- a/config/lt_vers.am +++ b/config/lt_vers.am @@ -17,7 +17,7 @@ # Add libtool shared library version numbers to the HDF5 library # See libtool versioning documentation online. LT_VERS_INTERFACE = 6 -LT_VERS_REVISION = 37 +LT_VERS_REVISION = 41 LT_VERS_AGE = 0 ## If the API changes *at all*, increment LT_VERS_INTERFACE and diff --git a/config/mpich b/config/mpich index 1ba62ff..575859e 100644 --- a/config/mpich +++ b/config/mpich @@ -21,14 +21,14 @@ # We know that mpich 1.2.4 and 1.2.5 do not support it correctly. We assume # older versions do not work either. We don't know of a way of testing its # correctness without the risk of hanging the configure process. So, we -# set the configure variable hdf5_mpi_complex_derived_datatype_works to no. +# set the configure variable hdf5_cv_mpi_complex_derived_datatype_works to no. # Notice that this code works only if the mpicc compiler shows its $MPIVERSION # properly. It is confirmed mpicc does that as far back as v1.2.3. # mpich2 do not support it correctly. But mpich2 reports small version number # indistiguishable from mpich. Some mpich2 reports blank, some reports 1.0.2. -if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then +if [ -z "$hdf5_cv_mpi_complex_derived_datatype_works" ]; then ccversion=`$CC -v 2>/dev/null` # mpich compiler will give "mpicc for 1.2.x ..." if echo "$ccversion" | grep '^mpicc for' > /dev/null ; then @@ -36,16 +36,16 @@ if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then ccversion=`echo $ccversion | cut -f3 -d' '` case "$ccversion" in 1.2.[0-5]*) - hdf5_mpi_complex_derived_datatype_works='no' + hdf5_cv_mpi_complex_derived_datatype_works='no' ;; 1.0.2) # mpich2 is recycling the version number, some report # 1.0.2, some report blank. - hdf5_mpi_complex_derived_datatype_works='no' + hdf5_cv_mpi_complex_derived_datatype_works='no' ;; "") # got blank ccversion. Assume it is bad a mpich2. - hdf5_mpi_complex_derived_datatype_works='no' + hdf5_cv_mpi_complex_derived_datatype_works='no' ;; *) # assume okay @@ -54,7 +54,7 @@ if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then fi fi -if [ -z "$hdf5_mpi_special_collective_io_works" ]; then +if [ -z "$hdf5_cv_mpi_special_collective_io_works" ]; then ccversion=`$CC -v 2>/dev/null` # mpich compiler will give "mpicc for 1.2.x ..." if echo "$ccversion" | grep '^mpicc for' > /dev/null ; then @@ -62,16 +62,16 @@ if [ -z "$hdf5_mpi_special_collective_io_works" ]; then ccversion=`echo $ccversion | cut -f3 -d' '` case "$ccversion" in 1.2.[0-6]*) - hdf5_mpi_special_collective_io_works='no' + hdf5_cv_mpi_special_collective_io_works='no' ;; 1.0.2) # mpich2 is recycling the version number, some report # 1.0.2, some report blank. - hdf5_mpi_special_collective_io_works='no' + hdf5_cv_mpi_special_collective_io_works='no' ;; "") # got blank ccversion. Assume it is bad a mpich2. - hdf5_mpi_special_collective_io_works='no' + hdf5_cv_mpi_special_collective_io_works='no' ;; *) # assume okay diff --git a/config/nec-superux14.1 b/config/nec-superux14.1 index 7e2c09f..dc1a15d 100644 --- a/config/nec-superux14.1 +++ b/config/nec-superux14.1 @@ -85,8 +85,8 @@ fi # PROFILE_CPPFLAGS library suitable for performance testing (like # `-pg'). This may or may not include debugging # or production flags. -# -# CFLAGS Flags can be added to this variable which +# +# H5_CFLAGS Flags can be added to this variable which # might already be partially initialized. These # flags will always be passed to the compiler # and should include switches to turn on full @@ -95,16 +95,14 @@ fi # practices resulting in few if any # warnings. # -# Warning flags do not have to be added to CFLAGS +# Warning flags do not have to be added to H5_CFLAGS # variable if the compiler is the GNU gcc # compiler or a descendent of gcc such as EGCS or PGCC. # -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# +# AM_CFLAGS Flags added directly into this variable will +# be propogated to the compiler wrapper scripts (h5cc, +# h5c++, et cetera) in addition to being used to compile +# the library. # # These flags should be set according to the compiler being used. # There are two ways to check the compiler. You can try using `-v' or @@ -115,7 +113,7 @@ fi case $CC_BASENAME in cc) - CFLAGS="$CFLAGS" + H5_CFLAGS="$H5_CFLAGS" DEBUG_CFLAGS="-Cdebug -g -wall" DEBUG_CPPFLAGS= PROD_CFLAGS="-Cnoopt" @@ -125,7 +123,7 @@ case $CC_BASENAME in ;; *) - CFLAGS="$CFLAGS" + H5_CFLAGS="$H5_CFLAGS" DEBUG_CFLAGS="-g" DEBUG_CPPFLAGS= PROD_CFLAGS="" @@ -137,21 +135,21 @@ esac case $CXX_BASENAME in c++) - CXXFLAGS="$CXXFLAGS -Tlocal" + H5_CXXFLAGS="$H5_CXXFLAGS -Tlocal" ;; *) - CXXFLAGS="$CXXFLAGS" + H5_CXXFLAGS="$H5_CXXFLAGS" ;; esac case $FC_BASENAME in f90) - FCFLAGS="$F9XFLAGS" + H5_FCFLAGS="$F9XFLAGS" ;; *) - FCFLAGS="$F9XFLAGS" + H5_FCFLAGS="$F9XFLAGS" ;; esac @@ -174,8 +172,8 @@ hdf5_cv_ldouble_to_uint_work=no hdf5_cv_ullong_to_fp_cast_works=yes hdf5_cv_ullong_to_ldouble_precision_works=no hdf5_cv_fp_to_integer_overflow_works=yes -hdf5_fp_to_ullong_accurate=no -hdf5_fp_to_ullong_right_maximum=no +hdf5_cv_fp_to_ullong_accurate=no +hdf5_cv_fp_to_ullong_right_maximum=no CONFIGURE_LIBS=/usr/lib/libi90sxe.a diff --git a/config/pgi-flags b/config/pgi-flags index 2611a87..2b03f3d 100644 --- a/config/pgi-flags +++ b/config/pgi-flags @@ -68,7 +68,7 @@ if test "X-pgcc" = "X-$cc_vendor"; then #esac # General - CFLAGS="$CFLAGS $arch -Minform,warn" + H5_CFLAGS="$H5_CFLAGS $arch -Minform,warn" # Production # Check for MPI wrapper being used and tweak down compiler options diff --git a/config/powerpc-ibm-aix4.x b/config/powerpc-ibm-aix4.x deleted file mode 100644 index b94f3b5..0000000 --- a/config/powerpc-ibm-aix4.x +++ /dev/null @@ -1,120 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. - -# What must *always* be present for things to compile correctly? -#CFLAGS="$CFLAGS -ansi" -#CPPFLAGS="$CPPFLAGS -I." - -# CFLAGS must be set else configure set it to -g -CFLAGS="$CFLAGS" - -# What compiler flags should be used for code development? -DEBUG_CFLAGS= -DEBUG_CPPFLAGS= - -# What compiler flags should be used for building a production -# library? -PROD_CFLAGS= -PROD_CPPFLAGS= - -# What compiler flags enable code profiling? -PROFILE_CFLAGS= -PROFILE_CPPFLAGS= - - -#---------------------------------------------------------------------------- -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -ac_cv_header_stdc=${ac_cv_header_stdc='yes'} -ac_cv_header_sys_ioctl_h=${ac_cv_header_sys_ioctl_h=yes} -RUNPARALLEL=${RUNPARALLEL="MP_PROCS=3 MP_TASKS_PER_NODE=3 poe"} - -# cache the sizeof of "standard C types" so that configure can run faster. -ac_cv_sizeof_char=${ac_cv_sizeof_char=1} -ac_cv_sizeof_short=${ac_cv_sizeof_short=2} -ac_cv_sizeof_int=${ac_cv_sizeof_int=4} -ac_cv_sizeof_long=${ac_cv_sizeof_long=4} -ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8} -ac_cv_sizeof___int64=${ac_cv_sizeof___int64=8} -ac_cv_sizeof_float=${ac_cv_sizeof_float=4} -ac_cv_sizeof_double=${ac_cv_sizeof_double=8} -ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8} -ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t=1} -ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t=1} -ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t=1} -ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t=1} -ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t=1} -ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t=4} -ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t=2} -ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t=2} -ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t=2} -ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t=2} -ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t=4} -ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t=4} -ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t=4} -ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t=4} -ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t=4} -ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t=4} -ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t=4} -ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t=4} -ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t=8} -ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t=8} -ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t=8} -ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t=8} -ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t=8} -ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8} - -# Don't cache size_t and off_t because they depend on if -D_LARGE_FILES is used -#ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4} -#ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=xlf -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="-qsuffix=f=f90" - FCFLAGS="$FCFLAGS -static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FCFLAGS="-O" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-O" - f9x_flags_set=yes -fi - -# The default C++ compiler - -# Use AIX supplied C++ compiler by default. -CXX=${CXX=xlC} -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} diff --git a/config/powerpc-ibm-aix5.x b/config/powerpc-ibm-aix5.x index 80925f0..ac70bac 100644 --- a/config/powerpc-ibm-aix5.x +++ b/config/powerpc-ibm-aix5.x @@ -48,7 +48,8 @@ case $CC_BASENAME in enable_shared="${enable_shared:-no}" # Use -D_LARGE_FILES by default to support large file size. # Make sure this is applied to other API compile options such as C++. - CFLAGS="-qlanglvl=stdc99 -D_LARGE_FILES $CFLAGS" + AM_CFLAGS="-D_LARGE_FILES $AM_CFLAGS" + H5_CFLAGS="-qlanglvl=stdc99 $H5_CFLAGS" DEBUG_CFLAGS="-g -qfullpath" DEBUG_CPPFLAGS= # -O causes test/dtypes to fail badly. Turn it off for now. @@ -63,7 +64,7 @@ case $CC_BASENAME in ;; *) - CFLAGS="$CFLAGS -ansi" + H5_CFLAGS="$H5_CFLAGS -ansi" DEBUG_CFLAGS="-g" DEBUG_CPPFLAGS= PROD_CFLAGS="-O" @@ -128,15 +129,21 @@ ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8} if test "X-" = "X-$FC"; then if test "X-$enable_parallel" = "X-yes"; then - FC=mpxlf_r + FC=mpxlf90_r else - FC=xlf + FC=xlf90 fi fi +# While we try to avoid setting FCFLAGS directly for use in compilation, in +# this case we need the -k flag present for some configure checks. As such, +# the configure script saves the user's set FCFLAGS before running, and +# restores them when complete. We must then set up both FCFLAGS and H5_FCFLAGS +# to ensure the flag is present for both configure as well as for the build. if test "X-" = "X-$f9x_flags_set"; then F9XSUFFIXFLAG="-qsuffix=f=f90" - FCFLAGS="$FCFLAGS -static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" + FCFLAGS="$FCFLAGS -O ${F9XSUFFIXFLAG}" + H5_FCFLAGS="$H5_FCFLAGS -O ${F9XSUFFIXFLAG}" FSEARCH_DIRS="-I./ -I../src" DEBUG_FCFLAGS="-O" PROD_FCFLAGS="-O" @@ -147,7 +154,7 @@ fi # With poe version 3.2.0.19 or lower(using lpp -l all | grep ppe.poe to check the version number, # IBM MPI-IO implementation has a bug, #it cannot generate correct MPI derived datatype. Please uncomment the following line: -#hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} +#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'} # The default C++ compiler @@ -157,6 +164,7 @@ CXX=${CXX=xlC} # Added -qweaksymbol to suppress linker messages warning of duplicate # symbols; these warnings are harmless. - BMR # Use -D_LARGE_FILES by default to support large file size. -CXXFLAGS="$CXXFLAGS -qweaksymbol -D_LARGE_FILES" +H5_CXXFLAGS="$H5_CXXFLAGS -qweaksymbol" +AM_CXXFLAGS="$AM_CXXFLAGS -D_LARGE_FILES" diff --git a/config/rs6000-ibm-aix4.x b/config/rs6000-ibm-aix4.x deleted file mode 100644 index 14885d1..0000000 --- a/config/rs6000-ibm-aix4.x +++ /dev/null @@ -1,43 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Cross compiling defaults -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=xlf -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="-qsuffix=f=f90" - FCFLAGS="$FCFLAGS -static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FCFLAGS="-O" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-O" - f9x_flags_set=yes -fi -# IBM MPI-IO doesn't handle complicated derived data type correctly. -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} diff --git a/config/solaris2.x b/config/solaris2.x index c81fd61..5ef6415 100644 --- a/config/solaris2.x +++ b/config/solaris2.x @@ -45,7 +45,7 @@ if test "X-" = "X-$cc_flags_set"; then 5.9*) # Need the xopenmp flag to build the Fortran library if test X-$enable_fortran = X-yes; then - LDFLAGS="$LDFLAGS -xopenmp=stubs" + AM_LDFLAGS="$AM_LDFLAGS -xopenmp=stubs" fi ;; esac @@ -56,8 +56,7 @@ if test "X-" = "X-$cc_flags_set"; then && PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`" fi -# Add socket lib for the Stream Virtual File Driver -LIBS="$LIBS -lsocket" +LIBS="$LIBS" # The default Fortran 90 compiler @@ -68,9 +67,9 @@ fi if test "X-" = "X-$f9x_flags_set"; then F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS" - DEBUG_FCFLAGS="" - PROD_FCFLAGS="" + H5_FCFLAGS="$H5_FCFLAGS" + DEBUG_FCFLAGS="-g" + PROD_FCFLAGS="-O2" PROFILE_FCFLAGS="" f9x_flags_set=yes fi diff --git a/config/sv1-cray b/config/sv1-cray index 4e3153f..1bae48d 100644 --- a/config/sv1-cray +++ b/config/sv1-cray @@ -73,8 +73,8 @@ RANLIB=: # PROFILE_CPPFLAGS library suitable for performance testing (like # `-pg'). This may or may not include debugging # or production flags. -# -# CFLAGS Flags can be added to this variable which +# +# H5_CFLAGS Flags can be added to this variable which # might already be partially initialized. These # flags will always be passed to the compiler # and should include switches to turn on full @@ -83,16 +83,14 @@ RANLIB=: # practices resulting in few if any # warnings. # -# Warning flags do not have to be added to CFLAGS +# Warning flags do not have to be added to H5_CFLAGS # variable if the compiler is the GNU gcc # compiler or a descendent of gcc such as EGCS or PGCC. # -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# +# AM_CFLAGS Flags added directly into this variable will +# be propogated to the compiler wrapper scripts (h5cc, +# h5c++, et cetera) in addition to being used to compile +# the library. # # These flags should be set according to the compiler being used. # There are two ways to check the compiler. You can try using `-v' or @@ -103,7 +101,7 @@ RANLIB=: case $CC_BASENAME in gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions DEBUG_CFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CFLAGS="-O3 -fomit-frame-pointer" @@ -113,7 +111,7 @@ case $CC_BASENAME in ;; cc) - CFLAGS="$CFLAGS" + H5_CFLAGS="$H5_CFLAGS" DEBUG_CFLAGS="-g -h zero" DEBUG_CPPFLAGS= PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1" @@ -123,7 +121,7 @@ case $CC_BASENAME in ;; *) - CFLAGS="$CFLAGS -ansi" + H5_CFLAGS="$H5_CFLAGS -ansi" DEBUG_CFLAGS="-g" DEBUG_CPPFLAGS= PROD_CFLAGS="-O" @@ -163,7 +161,7 @@ fi if test "X-" = "X-$f9x_flags_set"; then F9XSUFFIXFLAG="" FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp" + H5_FCFLAGS="$H5_FCFLAGS -dp" DEBUG_FCFLAGS="-dp" PROD_FCFLAGS="-dp" PROFILE_FCFLAGS="-dp" @@ -180,7 +178,7 @@ fi case $CXX_BASENAME in g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions DEBUG_CXXFLAGS="-g -fverbose-asm" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O3 -fomit-frame-pointer" @@ -190,7 +188,7 @@ case $CXX_BASENAME in ;; *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" + H5_CXXFLAGS="$H5_CXXFLAGS -h instantiate=used" DEBUG_CXXFLAGS="-g" DEBUG_CPPFLAGS= PROD_CXXFLAGS="-O" diff --git a/config/unicos b/config/unicos deleted file mode 100644 index 4c99bcd..0000000 --- a/config/unicos +++ /dev/null @@ -1,165 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp" - DEBUG_FCFLAGS="-dp" - PROD_FCFLAGS="-dp" - PROFILE_FCFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/config/unicos10.0.X b/config/unicos10.0.X deleted file mode 100644 index 09f5871..0000000 --- a/config/unicos10.0.X +++ /dev/null @@ -1,201 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Hard set the flag to indicate that converting denormalized floating-point -# values doesn't work. -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp" - DEBUG_FCFLAGS="-dp" - PROD_FCFLAGS="-dp" - PROFILE_FCFLAGS="-dp" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/unicosmk b/config/unicosmk deleted file mode 100644 index 7c279a7..0000000 --- a/config/unicosmk +++ /dev/null @@ -1,168 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp" - DEBUG_FCFLAGS="-dp" - PROD_FCFLAGS="-dp" - PROFILE_FCFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/config/unicosmk2.0.5.X b/config/unicosmk2.0.5.X deleted file mode 100644 index c76cd42..0000000 --- a/config/unicosmk2.0.5.X +++ /dev/null @@ -1,170 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 was stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp -Wl-M405" - DEBUG_FCFLAGS="" - PROD_FCFLAGS="" - PROFILE_FCFLAGS="" - f9x_flags_set=yes -fi diff --git a/config/unicosmk2.0.6.X b/config/unicosmk2.0.6.X deleted file mode 100644 index 861b205..0000000 --- a/config/unicosmk2.0.6.X +++ /dev/null @@ -1,203 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Hard set the flag to indicate that converting denormalized floating-point -# values doesn't work. -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 and 412 were stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp -Wl-M405,412" - DEBUG_FCFLAGS="" - PROD_FCFLAGS="" - PROFILE_FCFLAGS="" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/unicosmk2.0.X b/config/unicosmk2.0.X deleted file mode 100644 index f400a10..0000000 --- a/config/unicosmk2.0.X +++ /dev/null @@ -1,170 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 was stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FCFLAGS="$FCFLAGS -dp -Wl-M405" - DEBUG_FCFLAGS="" - PROD_FCFLAGS="" - PROFILE_FCFLAGS="" - f9x_flags_set=yes -fi diff --git a/config/x86_64-redstorm-linux-gnu b/config/x86_64-redstorm-linux-gnu index eb8f520..0cd2d73 100644 --- a/config/x86_64-redstorm-linux-gnu +++ b/config/x86_64-redstorm-linux-gnu @@ -33,7 +33,7 @@ if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpicc; then enable_shared="${enable_shared:-no}" fi -CFLAGS="$CFLAGS -DRED_STORM" +H5_CFLAGS="$H5_CFLAGS -DRED_STORM" # What compiler flags should be used for code development? DEBUG_CFLAGS=-g @@ -163,4 +163,4 @@ hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_ hdf5_cv_vsnprintf_works=${hdf5_cv_vsnprintf_works='yes'} hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'} # mpich2 used has derived datatype errors. -hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'} +hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'} |