diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/cmake/H5pubconf.h.in | 4 | ||||
| -rw-r--r-- | config/craynv | 198 | ||||
| -rw-r--r-- | config/dec-flags | 150 | ||||
| -rw-r--r-- | config/hpux11.23 | 96 | ||||
| -rw-r--r-- | config/ia64-linux-gnu | 144 | ||||
| -rw-r--r-- | config/nec-superux14.1 | 178 | ||||
| -rw-r--r-- | config/sv1-cray | 199 | ||||
| -rw-r--r-- | config/x86_64-redstorm-linux-gnu | 162 |
8 files changed, 0 insertions, 1131 deletions
diff --git a/config/cmake/H5pubconf.h.in b/config/cmake/H5pubconf.h.in index 8d7642e..9625ee3 100644 --- a/config/cmake/H5pubconf.h.in +++ b/config/cmake/H5pubconf.h.in @@ -43,10 +43,6 @@ writing. */ #cmakedefine H5_CLEAR_MEMORY @H5_CLEAR_MEMORY@ -/* Define if your system can handle converting denormalized floating-point - values. */ -#cmakedefine H5_CONVERT_DENORMAL_FLOAT @H5_CONVERT_DENORMAL_FLOAT@ - /* Define if C++ compiler recognizes offsetof */ #cmakedefine H5_CXX_HAVE_OFFSETOF @H5_CXX_HAVE_OFFSETOF@ diff --git a/config/craynv b/config/craynv deleted file mode 100644 index 479d5c8..0000000 --- a/config/craynv +++ /dev/null @@ -1,198 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - -# Disabling Dependency Tracking -# --------------------- -# -# The Cray X1 machines that The HDF Group tests on seem to have trouble doing -# dependency tracking (probably because they use Cray's C++ compiler, -# which autoconf may not recognize). Until this is fixed by autoconf -# or a user complains, disable dependency tracking on Crays. -enable_dependency_tracking="no" - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# H5_CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to H5_CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# AM_CFLAGS Flags added directly into this variable will -# be propogated to the compiler wrapper scripts (h5cc, -# h5c++, et cetera) in addition to being used to compile -# the library. -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - H5_CFLAGS="$H5_CFLAGS" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="" - PROD_CPPFLAGS= - PROFILE_CFLAGS= - PROFILE_CPPFLAGS= - ;; - - *) - H5_CFLAGS="$H5_CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Hard set the flag to indicate that converting denormalized floating-point -# values doesn't work. -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$F9X"; then - F9X=ftn -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number#. Warning 405 and 412 were stopping the executable from - # being built. - # The -em flag enables .mod files, which is what HDF5 builds. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -em" - DEBUG_FCFLAGS="-g" - PROD_FCFLAGS="" - PROFILE_FCFLAGS="" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - -case $CXX_BASENAME in - g++) - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CXXFLAGS="$H5_CXXFLAGS" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS= - PROFILE_CPPFLAGS= - ;; -esac - diff --git a/config/dec-flags b/config/dec-flags deleted file mode 100644 index 8f3fa1a..0000000 --- a/config/dec-flags +++ /dev/null @@ -1,150 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file should be sourced into configure if the compiler is a DEC -# compiler. It is careful not to do anything if the compiler is not -# DEC; otherwise `cc_flags_set' is set to `yes' -# - -# Get the compiler version unless it's already known. -# -# cc_vendor: The compiler vendor: DEC -# cc_version: Version number, like: V5.2-038 -# -if test X = "X$cc_flags_set"; then - cc_vendor=DEC - cc_version="`$CC $CFLAGS $H5_CFLAGS -V 2>&1 |head -1`" - case "$cc_version" in - DEC*) - cc_version="`echo $cc_version |\ - sed 's/.*DEC C \(V[0-9][-\.0-9]*\).*/\1/'`" - ;; - Compaq*) - cc_version="`echo $cc_version |\ - sed 's/.*Compaq C \(V[0-9][-\.0-9]*\).*/\1/'`" - ;; - esac - - if test X != "$gcc_version"; then - echo "compiler '$CC' is $cc_vendor-$cc_version" - else - cc_vendor= - fi -fi - -# Warn about old compilers that don't work right. -case "$cc_vendor-$cc_version" in - DEC-V5.2-038) - cat <<EOF - ** - ** This compiler may generate incorrect code when optimizations are - ** enabled. Please upgrade to a newer version (we're not sure which - ** version actually works) before reporting bugs to the HDF5 team. - ** -EOF - sleep 5 - ;; -esac - -# Compiler flags -case "$cc_vendor-$cc_version" in - DEC-V5.*) - # Production - PROD_CFLAGS="-std -verbose -warnprotos -ieee -misalign -O4 -ansi_args -fp_reorder -readonly_strings -inline speed" - PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS" - - # Debug - DEBUG_CFLAGS="-g -std -verbose -warnprotos -ieee -misalign" - DEBUG_CPPFLAGS= - - # Profile - PROFILE_CFLAGS="-pg -std -verbose -warnprotos -ieee -misalign" - PROFILE_CPPFLAGS= - - # Flags are set - cc_flags_set=yes - ;; - - DEC-V6.*) - # Production - PROD_CFLAGS="-c99 -verbose -warnprotos -ieee -misalign -O4 -fp_reorder -readonly_strings -inline speed" - PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS" - - # Debug - DEBUG_CFLAGS="-g -c99 -verbose -warnprotos -ieee -misalign" - DEBUG_CPPFLAGS= - - # Profile - PROFILE_CFLAGS="-pg -c99 -verbose -warnprotos -ieee -misalign" - PROFILE_CPPFLAGS= - - # Flags are set - cc_flags_set=yes - ;; -esac - -# If no flags were set then clear the compiler vendor and version info. -if test X = "X$cc_flags_set"; then - cc_vendor= - cc_version= -fi - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -Olimit 2048 -std1" - DEBUG_FCFLAGS="-Olimit 2048 -std1" - PROD_FCFLAGS="-Olimit 2048 -std1" - PROFILE_FCFLAGS="-Olimit 2048 -std1" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX=cxx - CXX_BASENAME=cxx -fi - - -case $CXX_BASENAME in - g++) - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CXXFLAGS="$H5_CXXFLAGS -tlocal -D__USE_STD_IOSTREAM" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - diff --git a/config/hpux11.23 b/config/hpux11.23 deleted file mode 100644 index 339cc84..0000000 --- a/config/hpux11.23 +++ /dev/null @@ -1,96 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Default compiler is `cc' -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi - -# Flags -case "X-$CC" in - X-gcc) - H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CFLAGS="$H5_CFLAGS -Ae -Wp,-H65536" #increase the size of macro definition table. For test/dtypes.c - DEBUG_CFLAGS=-g - DEBUG_CPPFLAGS="-Ae" - PROD_CFLAGS=-O - PROD_CPPFLAGS="-Ae" - PROFILE_CFLAGS= - PROFILE_CPPFLAGS="-Ae" - ;; -esac - -# The default Fortran 90 compiler - -if test "X$FC" = "X"; then - FC=f90 -fi - -if test "X$f9x_flags_set" = "X"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -O" - DEBUG_FCFLAGS="-O" - PROD_FCFLAGS="-O" - PROFILE_FCFLAGS="-O" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX=aCC - CXX_BASENAME=aCC -fi - -case "X-$CXX" in - X-aCC) - # +Z for PIC - H5_CXXFLAGS="$H5_CXXFLAGS +Z -D_INCLUDE_LONGLONG" - H5_CFLAGS="$H5_CFLAGS -g +O2" - DEBUG_CXXFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CPPFLAGS= - ;; - - *) - H5_CXXFLAGS="$H5_CXXFLAGS -D_INCLUDE_LONGLONG" - H5_CFLAGS="$H5_CFLAGS" - DEBUG_CXXFLAGS= - DEBUG_CPPFLAGS= - PROD_CXXFLAGS= - PROD_CPPFLAGS= - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/ia64-linux-gnu b/config/ia64-linux-gnu deleted file mode 100644 index 9f1b262..0000000 --- a/config/ia64-linux-gnu +++ /dev/null @@ -1,144 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - -# Use Intel C compiler by default (if it's available). -# Use mpicc for parallel by default. -if test "X$CC" = "X"; then - if test "X-$enable_parallel" = "X-yes"; then - CC=mpicc - CC_BASENAME=mpicc - elif which icc > /dev/null; then - CC=icc - CC_BASENAME=icc - fi -fi - -# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used. -if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpicc; then - RUNPARALLEL=${RUNPARALLEL="mpirun -np \$\${NPROCS:=6}"} -fi - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. - -case $CC_BASENAME in - ecc|icc) - . $srcdir/config/intel-flags - ;; - - gcc) - . $srcdir/config/gnu-flags - ;; - - *) - H5_CFLAGS="$H5_CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - -# The default Fortran 90 compiler - -# Use Intel Fortran compiler by default. -if test X-$enable_fortran = X-yes -a "X-$FC" = "X-"; then - if test "X-$enable_parallel" = "X-yes"; then - FC=mpif90 - else - FC="ifort" - fi -fi - -case $FC in - *efc|*ifort) - # this is for efc v7. Older efc do not work with these. - # -Vaxlib is for non-standard fortran calls like exit(). - MORE_FCFLAGS='-fpp -DDEC$=DEC_ -DMS$=MS_ -Vaxlib' - H5_FCFLAGS="$H5_FCFLAGS $MORE_FCFLAGS" - f9x_flags_set=yes - ;; - - *) - f9x_flags_set=yes - ;; -esac - -# The following is not right and need work. -if test "X$f9x_flags_set" = "X"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS" - DEBUG_FCFLAGS="" - PROD_FCFLAGS="" - PROFILE_FCFLAGS="" - f9x_flags_set=yes -fi - -# The Default settings for C++ -# Intel changed C++ compiler's name from "icc" to "icpc" in version 8.1 -if test -z "$CXX"; then - CXX=icpc - CXX_BASENAME=icpc -fi - -# A patch to make g++ getting the default settings. -# CXX_BASENAME should have been set in configure. -if test "X$CXX" = "Xg++"; then - CXX_BASENAME=g++ -fi - - -case $CXX_BASENAME in - ecc|icc) # Intel compilers - # Default to C99 standard. - H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}" - DEBUG_CXXFLAGS="-g -w2 -Wall" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="" #Default optimization O2 is used - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - g++) - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - # Default to C99 standard. - H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/nec-superux14.1 b/config/nec-superux14.1 deleted file mode 100644 index 05f898b..0000000 --- a/config/nec-superux14.1 +++ /dev/null @@ -1,178 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# [ak] created for a nec sx6 running superux with native compilers -# [ak] -xint is neccessary because of src/H5FDmulti.c[H5Pset_fapl_multi] -# [ak] integer division of unsigned longs for _memb_addr - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC="sxc++ -Xa -size_t64 -xint -K c99" - CC_BASENAME=sxc++ -fi -# The default archiver is `sxar' -AR=${AR:-sxar} -RANLIB=${RANLIB:=":"} - -if test "X-" = "X-$CXX"; then - CXX="sxc++ -size_t64 -xint -Kexceptions" - CXX_BASENAME=sxc++ -fi - -if test "X-" = "X-$F9X"; then - FC="sxf90 -size_t64 -ew " - FC_BASENAME=sxf90 -fi - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# H5_CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to H5_CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# AM_CFLAGS Flags added directly into this variable will -# be propogated to the compiler wrapper scripts (h5cc, -# h5c++, et cetera) in addition to being used to compile -# the library. -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - cc) - H5_CFLAGS="$H5_CFLAGS" - DEBUG_CFLAGS="-Cdebug -g -wall" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-Cnoopt" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-p" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CFLAGS="$H5_CFLAGS" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-p" - PROFILE_CPPFLAGS= - ;; -esac - -case $CXX_BASENAME in - c++) - H5_CXXFLAGS="$H5_CXXFLAGS -Tlocal" - ;; - - *) - H5_CXXFLAGS="$H5_CXXFLAGS" - ;; -esac - -case $FC_BASENAME in - f90) - H5_FCFLAGS="$F9XFLAGS" - ;; - - *) - H5_FCFLAGS="$F9XFLAGS" - ;; -esac - -# Overriding Configure Tests -# -------------------------- -# -ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=0} -hdf5_cv_gettimeofday_tz=no -# I have to add the follwoing two lines when -K c99 was used -ac_cv_func_getrusage=no -ac_cv_func_gethostname=no -hdf5_cv_vsnprintf_works=no -hdf5_cv_printf_ll=l -hdf5_cv_system_scope_threads=no -hdf5_cv_sw_ldouble_to_integer_works=no -hdf5_cv_fp_to_ullong_right_maximum=no -hdf5_cv_fp_to_ullong_right_maximum=no -hdf5_cv_ldouble_to_uint_work=no -hdf5_cv_ullong_to_fp_cast_works=yes -hdf5_cv_ullong_to_ldouble_precision_works=no -hdf5_cv_fp_to_integer_overflow_works=yes -hdf5_cv_fp_to_ullong_accurate=no -hdf5_cv_fp_to_ullong_right_maximum=no -CONFIGURE_LIBS=/usr/lib/libi90sxe.a - - diff --git a/config/sv1-cray b/config/sv1-cray deleted file mode 100644 index 1bae48d..0000000 --- a/config/sv1-cray +++ /dev/null @@ -1,199 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# H5_CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to H5_CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# AM_CFLAGS Flags added directly into this variable will -# be propogated to the compiler wrapper scripts (h5cc, -# h5c++, et cetera) in addition to being used to compile -# the library. -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - H5_CFLAGS="$H5_CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CFLAGS="$H5_CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Hard set the flag to indicate that converting denormalized floating-point -# values doesn't work. -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} - -# The default Fortran 90 compiler - -if test "X-" = "X-$FC"; then - FC=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -dp" - DEBUG_FCFLAGS="-dp" - PROD_FCFLAGS="-dp" - PROFILE_FCFLAGS="-dp" - f9x_flags_set=yes -fi - -# The default C++ compiler - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - - -case $CXX_BASENAME in - g++) - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - H5_CXXFLAGS="$H5_CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac diff --git a/config/x86_64-redstorm-linux-gnu b/config/x86_64-redstorm-linux-gnu deleted file mode 100644 index f796052..0000000 --- a/config/x86_64-redstorm-linux-gnu +++ /dev/null @@ -1,162 +0,0 @@ -# -*- shell-script -*- -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. - - -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# This is for the ASCI RED STORM machine - -# Define RUNPARALLEL and RUNSERIAL if parallel mode is enabled or a parallel -# compiler is used. -if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpicc; then - RUNSERIAL=${RUNSERIAL:-"yod -sz 1"} - RUNPARALLEL=${RUNPARALLEL:-"yod -sz 3"} - # Disable stream-vfd option. It does not work in parallel mode. - enable_stream_vfd="${enable_stream_vfd:-no}" - # Turn off shared lib option. It does not work in parallel mode. - enable_shared="${enable_shared:-no}" -fi - -H5_CFLAGS="$H5_CFLAGS -DRED_STORM" - -# What compiler flags should be used for code development? -DEBUG_CFLAGS=-g -DEBUG_CPPFLAGS= - -# What compiler flags should be used for building a production -# library? -PROD_CFLAGS=-O -PROD_CPPFLAGS= - -# What compiler flags enable code profiling? -PROFILE_CFLAGS=-pg -PROFILE_CPPFLAGS= - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# Cache the sizeof of the following types to save configure time. -# These are verified in test/tconfig in case they change. -ac_cv_type_char=${ac_cv_type_char=yes} -ac_cv_sizeof_char=${ac_cv_sizeof_char='1'} -ac_cv_type_short=${ac_cv_type_short=yes} -ac_cv_sizeof_short=${ac_cv_sizeof_short='2'} -ac_cv_type_int=${ac_cv_type_int=yes} -ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} -ac_cv_type_long=${ac_cv_type_long=yes} -ac_cv_sizeof_long=${ac_cv_sizeof_long='8'} -ac_cv_type_float=${ac_cv_type_float=yes} -ac_cv_sizeof_float=${ac_cv_sizeof_float='4'} -ac_cv_type_double=${ac_cv_type_double=yes} -ac_cv_sizeof_double=${ac_cv_sizeof_double='8'} -ac_cv_type_long_double=${ac_cv_type_long_double=yes} -# no cache for long double which varies in size in different compilers. -# gcc defines it as 12 bytes but pgcc defines it as 8 bytes. -#ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double='8'} -ac_cv_type_long_long=${ac_cv_type_long_long=yes} -ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long='8'} -ac_cv_type_size_t=${ac_cv_type_size_t=yes} -ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t='8'} -ac_cv_type_ssize_t=${ac_cv_type_ssize_t=yes} -ac_cv_sizeof_ssize_t=${ac_cv_sizeof_ssize_t='8'} -ac_cv_type_off_t=${ac_cv_type_off_t=yes} -ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t='8'} - -# Hard set sizeof of the following types to 0 because they are not supported. -#ac_cv_type___int64=${ac_cv_type___int64=no} -#ac_cv_sizeof___int64=${ac_cv_sizeof___int64='0'} - -# Hard set malloc of zero bytes to no because it does not work. -hdf5_cv_malloc_works=${hdf5_cv_malloc_works='no'} - -# Cache the sizeof of the following types to save configure time. -# These are verified in test/tconfig in case they change. -ac_cv_type_int8_t=${ac_cv_type_int8_t=yes} -ac_cv_type_int16_t=${ac_cv_type_int16_t=yes} -ac_cv_type_int32_t=${ac_cv_type_int32_t=yes} -ac_cv_type_int64_t=${ac_cv_type_int64_t=yes} -ac_cv_type_uint8_t=${ac_cv_type_uint8_t=yes} -ac_cv_type_uint16_t=${ac_cv_type_uint16_t=yes} -ac_cv_type_uint32_t=${ac_cv_type_uint32_t=yes} -ac_cv_type_uint64_t=${ac_cv_type_uint64_t=yes} -ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='1'} -ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='2'} -ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='4'} -ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='8'} -ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='1'} -ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='2'} -ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='4'} -ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='8'} - -# Cache the sizeof of the following types to save configure time. -# These are verified in test/tconfig in case they change. -ac_cv_type_int_least8_t=${ac_cv_type_int_least8_t=yes} -ac_cv_type_int_least16_t=${ac_cv_type_int_least16_t=yes} -ac_cv_type_int_least32_t=${ac_cv_type_int_least32_t=yes} -ac_cv_type_int_least64_t=${ac_cv_type_int_least64_t=yes} -ac_cv_type_uint_least8_t=${ac_cv_type_uint_least8_t=yes} -ac_cv_type_uint_least16_t=${ac_cv_type_uint_least16_t=yes} -ac_cv_type_uint_least32_t=${ac_cv_type_uint_least32_t=yes} -ac_cv_type_uint_least64_t=${ac_cv_type_uint_least64_t=yes} -ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='1'} -ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='2'} -ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='4'} -ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='8'} -ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='1'} -ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='2'} -ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='4'} -ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='8'} - -# Cache the sizeof of the following types to save configure time. -# These are verified in test/tconfig in case they change. -ac_cv_type_int_fast8_t=${ac_cv_type_int_fast8_t=yes} -ac_cv_type_int_fast16_t=${ac_cv_type_int_fast16_t=yes} -ac_cv_type_int_fast32_t=${ac_cv_type_int_fast32_t=yes} -ac_cv_type_int_fast64_t=${ac_cv_type_int_fast64_t=yes} -ac_cv_type_uint_fast8_t=${ac_cv_type_uint_fast8_t=yes} -ac_cv_type_uint_fast16_t=${ac_cv_type_uint_fast16_t=yes} -ac_cv_type_uint_fast32_t=${ac_cv_type_uint_fast32_t=yes} -ac_cv_type_uint_fast64_t=${ac_cv_type_uint_fast64_t=yes} -ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='1'} -ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='8'} -ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='8'} -ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='8'} -ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='1'} -ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='8'} -ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='8'} -ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='8'} - -hdf5_cv_system_scope_threads=${hdf5_cv_system_scope_threads="no"} - -# Hard set MPI_File_set_size() working for files over 2GB to yes -hdf5_cv_mpi_file_set_size_big=${hdf5_cv_mpi_file_set_size_big='yes'} - -# Hard set variables for v1.7 and higher. -# Set gettimeofday_tz to yes. -hdf5_cv_gettimeofday_tz=${hdf5_cv_gettimeofday_tz='yes'} -hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'} -hdf5_cv_fp_to_ullong_right_maximum=${hdf5_cv_fp_to_ullong_right_maximum='yes'} -hdf5_cv_ldouble_to_uint_works=${hdf5_cv_ldouble_to_uint_works='yes'} -hdf5_cv_sw_ldouble_to_integer_works=${hdf5_cv_sw_ldouble_to_integer_works='yes'} -hdf5_cv_ullong_to_fp_cast_works=${hdf5_cv_ullong_to_fp_cast_works='yes'} -hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_works='yes'} -hdf5_cv_vsnprintf_works=${hdf5_cv_vsnprintf_works='yes'} -hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'} |