summaryrefslogtreecommitdiffstats
path: root/config
diff options
context:
space:
mode:
Diffstat (limited to 'config')
-rw-r--r--config/cmake/CPack.cmake597
1 files changed, 330 insertions, 267 deletions
diff --git a/config/cmake/CPack.cmake b/config/cmake/CPack.cmake
index 2e6b23a..d96fe43 100644
--- a/config/cmake/CPack.cmake
+++ b/config/cmake/CPack.cmake
@@ -1,5 +1,7 @@
-# - Build binary and source package installers
-#
+##section Variables common to all CPack generators
+##end
+##module
+# - Build binary and source package installers.
# The CPack module generates binary and source installers in a variety
# of formats using the cpack program. Inclusion of the CPack module
# adds two new targets to the resulting makefiles, package and
@@ -29,16 +31,16 @@
# on a per-generator basis. It only need contain overrides.
#
# Here's how it works:
-# - cpack runs
-# - it includes CPackConfig.cmake
-# - it iterates over the generators listed in that file's
-# CPACK_GENERATOR list variable (unless told to use just a
-# specific one via -G on the command line...)
+# - cpack runs
+# - it includes CPackConfig.cmake
+# - it iterates over the generators listed in that file's
+# CPACK_GENERATOR list variable (unless told to use just a
+# specific one via -G on the command line...)
#
-# - foreach generator, it then
-# - sets CPACK_GENERATOR to the one currently being iterated
-# - includes the CPACK_PROJECT_CONFIG_FILE
-# - produces the package for that generator
+# - foreach generator, it then
+# - sets CPACK_GENERATOR to the one currently being iterated
+# - includes the CPACK_PROJECT_CONFIG_FILE
+# - produces the package for that generator
#
# This is the key: For each generator listed in CPACK_GENERATOR
# in CPackConfig.cmake, cpack will *reset* CPACK_GENERATOR
@@ -48,174 +50,225 @@
# Before including this CPack module in your CMakeLists.txt file,
# there are a variety of variables that can be set to customize
# the resulting installers. The most commonly-used variables are:
-#
-# CPACK_PACKAGE_NAME - The name of the package (or application). If
-# not specified, defaults to the project name.
-#
-# CPACK_PACKAGE_VENDOR - The name of the package vendor (e.g.,
-# "Kitware").
-#
-# CPACK_PACKAGE_VERSION_MAJOR - Package major Version
-#
-# CPACK_PACKAGE_VERSION_MINOR - Package minor Version
-#
-# CPACK_PACKAGE_VERSION_PATCH - Package patch Version
-#
-# CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the
-# project. Used, for example, the introduction screen of a
-# CPack-generated Windows installer to describe the project.
-#
-# CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the
-# project (only a few words).
-#
-# CPACK_PACKAGE_FILE_NAME - The name of the package file to generate,
-# not including the extension. For example, cmake-2.6.1-Linux-i686.
-#
-# CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the
-# target system, e.g., "CMake 2.5".
-#
-# CPACK_PROJECT_CONFIG_FILE - File included at cpack time, once per
-# generator after setting CPACK_GENERATOR to the actual generator
-# being used. Allows per-generator setting of CPACK_* variables at
-# cpack time.
-#
-# CPACK_RESOURCE_FILE_LICENSE - License file for the project, which
-# will typically be displayed to the user (often with an explicit
-# "Accept" button, for graphical installers) prior to installation.
-#
-# CPACK_RESOURCE_FILE_README - ReadMe file for the project, which
-# typically describes in some detail
-#
-# CPACK_RESOURCE_FILE_WELCOME - Welcome file for the project, which
-# welcomes users to this installer. Typically used in the graphical
-# installers on Windows and Mac OS X.
-#
-# CPACK_MONOLITHIC_INSTALL - Disables the component-based
-# installation mechanism, so that all components are always installed.
-#
-# CPACK_GENERATOR - List of CPack generators to use. If not
-# specified, CPack will create a set of options (e.g.,
-# CPACK_BINARY_NSIS) allowing the user to enable/disable individual
-# generators.
-#
-# CPACK_OUTPUT_CONFIG_FILE - The name of the CPack configuration file
-# for binary installers that will be generated by the CPack
-# module. Defaults to CPackConfig.cmake.
-#
-# CPACK_PACKAGE_EXECUTABLES - Lists each of the executables along
-# with a text label, to be used to create Start Menu shortcuts on
-# Windows. For example, setting this to the list ccmake;CMake will
-# create a shortcut named "CMake" that will execute the installed
-# executable ccmake.
-#
-# CPACK_STRIP_FILES - List of files to be stripped. Starting with
-# CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which
-# enables stripping of all files (a list of files evaluates to TRUE
-# in CMake, so this change is compatible).
-#
-# The following CPack variables are specific to source packages, and
+##end
+#
+##variable
+# CPACK_PACKAGE_NAME - The name of the package (or application). If
+# not specified, defaults to the project name.
+##end
+#
+##variable
+# CPACK_PACKAGE_VENDOR - The name of the package vendor. (e.g.,
+# "Kitware").
+##end
+#
+##variable
+# CPACK_PACKAGE_DIRECTORY - The directory in which CPack is doing its
+# packaging. If it is not set then this will default (internally) to the
+# build dir. This variable may be defined in CPack config file or from
+# the cpack command line option "-B". If set the command line option
+# override the value found in the config file.
+##end
+#
+##variable
+# CPACK_PACKAGE_VERSION_MAJOR - Package major Version
+##end
+#
+##variable
+# CPACK_PACKAGE_VERSION_MINOR - Package minor Version
+##end
+#
+##variable
+# CPACK_PACKAGE_VERSION_PATCH - Package patch Version
+##end
+#
+##variable
+# CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the
+# project. Used, for example, the introduction screen of a
+# CPack-generated Windows installer to describe the project.
+##end
+#
+##variable
+# CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the
+# project (only a few words).
+##end
+#
+##variable
+# CPACK_PACKAGE_FILE_NAME - The name of the package file to generate,
+# not including the extension. For example, cmake-2.6.1-Linux-i686.
+# The default value is
+#
+# ${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}.
+##end
+#
+##variable
+# CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the
+# target system. This may be used by some CPack generators
+# like NSIS to create an installation directory e.g., "CMake 2.5"
+# below the installation prefix. All installed element will be
+# put inside this directory.
+##end
+#
+##variable
+# CPACK_PACKAGE_ICON - A branding image that will be displayed inside
+# the installer (used by GUI installers).
+##end
+#
+##variable
+# CPACK_PROJECT_CONFIG_FILE - CPack-time project CPack configuration
+# file. This file included at cpack time, once per
+# generator after CPack has set CPACK_GENERATOR to the actual generator
+# being used. It allows per-generator setting of CPACK_* variables at
+# cpack time.
+##end
+#
+##variable
+# CPACK_RESOURCE_FILE_LICENSE - License to be embedded in the installer. It
+# will typically be displayed to the user by the produced installer
+# (often with an explicit "Accept" button, for graphical installers)
+# prior to installation. This license file is NOT added to installed
+# file but is used by some CPack generators like NSIS. If you want
+# to install a license file (may be the same as this one)
+# along with your project you must add an appropriate CMake INSTALL
+# command in your CMakeLists.txt.
+##end
+#
+##variable
+# CPACK_RESOURCE_FILE_README - ReadMe file to be embedded in the installer. It
+# typically describes in some detail the purpose of the project
+# during the installation. Not all CPack generators uses
+# this file.
+##end
+#
+##variable
+# CPACK_RESOURCE_FILE_WELCOME - Welcome file to be embedded in the
+# installer. It welcomes users to this installer.
+# Typically used in the graphical installers on Windows and Mac OS X.
+##end
+#
+##variable
+# CPACK_MONOLITHIC_INSTALL - Disables the component-based
+# installation mechanism. When set the component specification is ignored
+# and all installed items are put in a single "MONOLITHIC" package.
+# Some CPack generators do monolithic packaging by default and
+# may be asked to do component packaging by setting
+# CPACK_<GENNAME>_COMPONENT_INSTALL to 1/TRUE.
+##end
+#
+##variable
+# CPACK_GENERATOR - List of CPack generators to use. If not
+# specified, CPack will create a set of options CPACK_BINARY_<GENNAME> (e.g.,
+# CPACK_BINARY_NSIS) allowing the user to enable/disable individual
+# generators. This variable may be used on the command line
+# as well as in:
+#
+# cpack -D CPACK_GENERATOR="ZIP;TGZ" /path/to/build/tree
+##end
+#
+##variable
+# CPACK_OUTPUT_CONFIG_FILE - The name of the CPack binary configuration
+# file. This file is the CPack configuration generated by the CPack module
+# for binary installers. Defaults to CPackConfig.cmake.
+##end
+#
+##variable
+# CPACK_PACKAGE_EXECUTABLES - Lists each of the executables and associated
+# text label to be used to create Start Menu shortcuts. For example,
+# setting this to the list ccmake;CMake will
+# create a shortcut named "CMake" that will execute the installed
+# executable ccmake. Not all CPack generators use it (at least NSIS and
+# OSXX11 do).
+##end
+#
+##variable
+# CPACK_STRIP_FILES - List of files to be stripped. Starting with
+# CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which
+# enables stripping of all files (a list of files evaluates to TRUE
+# in CMake, so this change is compatible).
+##end
+#
+# The following CPack variables are specific to source packages, and
# will not affect binary packages:
#
-# CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package,
-# e.g., cmake-2.6.1
-#
-# CPACK_SOURCE_STRIP_FILES - List of files in the source tree that
-# will be stripped. Starting with CMake 2.6.0
-# CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables
-# stripping of all files (a list of files evaluates to TRUE in CMake,
-# so this change is compatible).
-#
-# CPACK_SOURCE_GENERATOR - List of generators used for the source
-# packages. As with CPACK_GENERATOR, if this is not specified then
-# CPack will create a set of options (e.g., CPACK_SOURCE_ZIP)
-# allowing users to select which packages will be generated.
-#
-# CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack
-# configuration file for source installers that will be generated by
-# the CPack module. Defaults to CPackSourceConfig.cmake.
-#
-# CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree
-# that won't be packaged when building a source package. This is a
-# list of patterns, e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
-#
-# The following variables are specific to the DragNDrop installers
-# built on Mac OS X:
-#
-# CPACK_DMG_VOLUME_NAME - The volume name of the generated disk
-# image. Defaults to CPACK_PACKAGE_FILE_NAME.
-#
-# CPACK_DMG_FORMAT - The disk image format. Common values are UDRO
-# (UDIF read-only), UDZO (UDIF zlib-compressed) or UDBZ (UDIF
-# bzip2-compressed). Refer to hdiutil(1) for more information on
-# other available formats.
-#
-# CPACK_DMG_DS_STORE - Path to a custom .DS_Store file which e.g.
-# can be used to specify the Finder window position/geometry and
-# layout (such as hidden toolbars, placement of the icons etc.).
-# This file has to be generated by the Finder (either manually or
-# through OSA-script) using a normal folder from which the .DS_Store
-# file can then be extracted.
-#
-# CPACK_DMG_BACKGROUND_IMAGE - Path to an image file which is to be
-# used as the background for the Finder Window when the disk image
-# is opened. By default no background image is set. The background
-# image is applied after applying the custom .DS_Store file.
-#
-# CPACK_COMMAND_HDIUTIL - Path to the hdiutil(1) command used to
-# operate on disk image files on Mac OS X. This variable can be used
-# to override the automatically detected command (or specify its
-# location if the auto-detection fails to find it.)
-#
-# CPACK_COMMAND_SETFILE - Path to the SetFile(1) command used to set
-# extended attributes on files and directories on Mac OS X. This
-# variable can be used to override the automatically detected
-# command (or specify its location if the auto-detection fails to
-# find it.)
-#
-# CPACK_COMMAND_REZ - Path to the Rez(1) command used to compile
-# resources on Mac OS X. This variable can be used to override the
-# automatically detected command (or specify its location if the
-# auto-detection fails to find it.)
-#
-# The following variable is specific to installers build on Mac OS X
-# using PackageMaker:
-#
-# CPACK_OSX_PACKAGE_VERSION - The version of Mac OS X that the
-# resulting PackageMaker archive should be compatible
-# with. Different versions of Mac OS X support different
-# features. For example, CPack can only build component-based
-# installers for Mac OS X 10.4 or newer, and can only build
-# installers that download component son-the-fly for Mac OS X 10.5
-# or newer. If left blank, this value will be set to the minimum
-# version of Mac OS X that supports the requested features. Set this
-# variable to some value (e.g., 10.4) only if you want to guarantee
-# that your installer will work on that version of Mac OS X, and
-# don't mind missing extra features available in the installer
-# shipping with later versions of Mac OS X.
+##variable
+# CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package. For
+# example cmake-2.6.1.
+##end
+#
+##variable
+# CPACK_SOURCE_STRIP_FILES - List of files in the source tree that
+# will be stripped. Starting with CMake 2.6.0
+# CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables
+# stripping of all files (a list of files evaluates to TRUE in CMake,
+# so this change is compatible).
+##end
+#
+##variable
+# CPACK_SOURCE_GENERATOR - List of generators used for the source
+# packages. As with CPACK_GENERATOR, if this is not specified then
+# CPack will create a set of options (e.g., CPACK_SOURCE_ZIP)
+# allowing users to select which packages will be generated.
+##end
+#
+##variable
+# CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack source
+# configuration file. This file is the CPack configuration generated by the
+# CPack module for source installers. Defaults to CPackSourceConfig.cmake.
+##end
+#
+##variable
+# CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree
+# that won't be packaged when building a source package. This is a
+# list of regular expression patterns (that must be properly escaped),
+# e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
+##end
#
# The following variables are for advanced uses of CPack:
#
-# CPACK_CMAKE_GENERATOR - What CMake generator should be used if the
-# project is CMake project. Defaults to the value of CMAKE_GENERATOR;
-# few users will want to change this setting.
-#
-# CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify
-# what project to install. The four values are: Build directory,
-# Project Name, Project Component, Directory. If omitted, CPack will
-# build an installer that installers everything.
-#
-# CPACK_SYSTEM_NAME - System name, defaults to the value of
-# ${CMAKE_SYSTEM_NAME}.
-#
-# CPACK_PACKAGE_VERSION - Package full version, used internally. By
-# default, this is built from CPACK_PACKAGE_VERSION_MAJOR,
-# CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH.
-#
-# CPACK_TOPLEVEL_TAG - Directory for the installed files.
-#
-# CPACK_INSTALL_COMMANDS - Extra commands to install components.
-#
-# CPACK_INSTALLED_DIRECTORIES - Extra directories to install.
+##variable
+# CPACK_CMAKE_GENERATOR - What CMake generator should be used if the
+# project is CMake project. Defaults to the value of CMAKE_GENERATOR
+# few users will want to change this setting.
+##end
+#
+##variable
+# CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify
+# what project to install. The four values are: Build directory,
+# Project Name, Project Component, Directory. If omitted, CPack will
+# build an installer that installers everything.
+##end
+#
+##variable
+# CPACK_SYSTEM_NAME - System name, defaults to the value of
+# ${CMAKE_SYSTEM_NAME}.
+##end
+#
+##variable
+# CPACK_PACKAGE_VERSION - Package full version, used internally. By
+# default, this is built from CPACK_PACKAGE_VERSION_MAJOR,
+# CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH.
+##end
+#
+##variable
+# CPACK_TOPLEVEL_TAG - Directory for the installed files.
+##end
+#
+##variable
+# CPACK_INSTALL_COMMANDS - Extra commands to install components.
+##end
+#
+##variable
+# CPACK_INSTALLED_DIRECTORIES - Extra directories to install.
+##end
+#
+##variable
+# CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when
+# installing this project. This is only used
+# by installer for Windows.
+##end
+##variable
+# CPACK_CREATE_DESKTOP_LINKS - List of desktop links to create.
+##end
#
#=============================================================================
@@ -232,48 +285,48 @@
# License text for the above reference.)
# Define this var in order to avoid (or warn) concerning multiple inclusion
-IF(CPack_CMake_INCLUDED)
- MESSAGE(WARNING "CPack.cmake has already been included!!")
-ELSE(CPack_CMake_INCLUDED)
- SET(CPack_CMake_INCLUDED 1)
-ENDIF(CPack_CMake_INCLUDED)
+if(CPack_CMake_INCLUDED)
+ message(WARNING "CPack.cmake has already been included!!")
+else()
+ set(CPack_CMake_INCLUDED 1)
+endif()
# Pick a configuration file
-SET(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
-IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
- SET(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
-ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
-SET(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
-IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
- SET(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
-ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
+set(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
+if(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
+ set(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
+endif()
+set(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
+if(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
+ set(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
+endif()
# Backward compatibility
# Include CPackComponent macros if it has not already been included before.
include(CPackComponent)
# Macro for setting values if a user did not overwrite them
-MACRO(cpack_set_if_not_set name value)
- IF(NOT DEFINED "${name}")
- SET(${name} "${value}")
- ENDIF(NOT DEFINED "${name}")
-ENDMACRO(cpack_set_if_not_set)
+macro(cpack_set_if_not_set name value)
+ if(NOT DEFINED "${name}")
+ set(${name} "${value}")
+ endif()
+endmacro()
-# Macro to encode variables for the configuration file
+# cpack_encode_variables - Macro to encode variables for the configuration file
# find any variable that starts with CPACK and create a variable
# _CPACK_OTHER_VARIABLES_ that contains SET commands for
# each cpack variable. _CPACK_OTHER_VARIABLES_ is then
# used as an @ replacment in configure_file for the CPackConfig.
-MACRO(cpack_encode_variables)
- SET(_CPACK_OTHER_VARIABLES_)
- GET_CMAKE_PROPERTY(res VARIABLES)
- FOREACH(var ${res})
- IF("xxx${var}" MATCHES "xxxCPACK")
- SET(_CPACK_OTHER_VARIABLES_
+macro(cpack_encode_variables)
+ set(_CPACK_OTHER_VARIABLES_)
+ get_cmake_property(res VARIABLES)
+ foreach(var ${res})
+ if("xxx${var}" MATCHES "xxxCPACK")
+ set(_CPACK_OTHER_VARIABLES_
"${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")")
- ENDIF("xxx${var}" MATCHES "xxxCPACK")
- ENDFOREACH(var ${res})
-ENDMACRO(cpack_encode_variables)
+ endif()
+ endforeach()
+endmacro()
# Set the package name
cpack_set_if_not_set(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
@@ -297,27 +350,31 @@ cpack_set_if_not_set(CPACK_RESOURCE_FILE_WELCOME
cpack_set_if_not_set(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}")
-IF(CPACK_NSIS_MODIFY_PATH)
- SET(CPACK_NSIS_MODIFY_PATH ON)
-ENDIF(CPACK_NSIS_MODIFY_PATH)
-
-SET(__cpack_system_name ${CMAKE_SYSTEM_NAME})
-IF(${__cpack_system_name} MATCHES Windows)
- IF(CMAKE_CL_64)
- SET(__cpack_system_name win64)
- ELSE(CMAKE_CL_64)
- SET(__cpack_system_name win32)
- ENDIF(CMAKE_CL_64)
-ENDIF(${__cpack_system_name} MATCHES Windows)
+if(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL)
+ set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
+endif()
+
+if(CPACK_NSIS_MODIFY_PATH)
+ set(CPACK_NSIS_MODIFY_PATH ON)
+endif()
+
+set(__cpack_system_name ${CMAKE_SYSTEM_NAME})
+if(${__cpack_system_name} MATCHES Windows)
+ if(CMAKE_CL_64)
+ set(__cpack_system_name win64)
+ else()
+ set(__cpack_system_name win32)
+ endif()
+endif()
cpack_set_if_not_set(CPACK_SYSTEM_NAME "${__cpack_system_name}")
# Root dir: default value should be the string literal "$PROGRAMFILES"
# for backwards compatibility. Projects may set this value to anything.
if(CMAKE_CL_64)
set(__cpack_root_default "$PROGRAMFILES64")
-else(CMAKE_CL_64)
+else()
set(__cpack_root_default "$PROGRAMFILES")
-endif(CMAKE_CL_64)
+endif()
cpack_set_if_not_set(CPACK_NSIS_INSTALL_ROOT "${__cpack_root_default}")
# <project>-<major>.<minor>.<patch>-<release>-<platform>.<pkgtype>
@@ -333,15 +390,15 @@ cpack_set_if_not_set(CPACK_PACKAGE_RELOCATABLE "true")
# always force to exactly "true" or "false" for CPack.Info.plist.in:
if(CPACK_PACKAGE_RELOCATABLE)
set(CPACK_PACKAGE_RELOCATABLE "true")
-else(CPACK_PACKAGE_RELOCATABLE)
+else()
set(CPACK_PACKAGE_RELOCATABLE "false")
-endif(CPACK_PACKAGE_RELOCATABLE)
+endif()
macro(cpack_check_file_exists file description)
if(NOT EXISTS "${file}")
message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.")
- endif(NOT EXISTS "${file}")
-endmacro(cpack_check_file_exists)
+ endif()
+endmacro()
cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description")
cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}" "license resource")
@@ -351,9 +408,15 @@ cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}" "welcome resource")
macro(cpack_optional_append _list _cond _item)
if(${_cond})
set(${_list} ${${_list}} ${_item})
- endif(${_cond})
-endmacro(cpack_optional_append _list _cond _item)
-
+ endif()
+endmacro()
+
+##variable
+# CPACK_BINARY_<GENNAME> - CPack generated options for binary generators. The
+# CPack.cmake module generates (when CPACK_GENERATOR is not set)
+# a set of CMake options (see CMake option command) which may then be used to
+# select the CPack generator(s) to be used when launching the package target.
+##end
# Provide options to choose generators
# we might check here if the required tools for the generates exist
# and set the defaults according to the results
@@ -361,27 +424,27 @@ if(NOT CPACK_GENERATOR)
if(UNIX)
if(CYGWIN)
option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON)
- else(CYGWIN)
+ else()
if(APPLE)
option(CPACK_BINARY_BUNDLE "Enable to build OSX bundles" OFF)
option(CPACK_BINARY_DRAGNDROP "Enable to build OSX Drag And Drop package" OFF)
option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" ON)
option(CPACK_BINARY_OSXX11 "Enable to build OSX X11 packages" OFF)
- else(APPLE)
+ else()
option(CPACK_BINARY_TZ "Enable to build TZ packages" ON)
- endif(APPLE)
+ endif()
option(CPACK_BINARY_STGZ "Enable to build STGZ packages" ON)
option(CPACK_BINARY_TGZ "Enable to build TGZ packages" ON)
option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages" OFF)
option(CPACK_BINARY_DEB "Enable to build Debian packages" OFF)
option(CPACK_BINARY_RPM "Enable to build RPM packages" OFF)
option(CPACK_BINARY_NSIS "Enable to build NSIS packages" OFF)
- endif(CYGWIN)
- else(UNIX)
+ endif()
+ else()
option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON)
option(CPACK_BINARY_ZIP "Enable to build ZIP packages" OFF)
- endif(UNIX)
-
+ endif()
+
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_BUNDLE Bundle)
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DRAGNDROP DragNDrop)
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_PACKAGEMAKER PackageMaker)
@@ -395,37 +458,37 @@ if(NOT CPACK_GENERATOR)
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TBZ2 TBZ2)
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TZ TZ)
cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_ZIP ZIP)
-
-endif(NOT CPACK_GENERATOR)
+
+endif()
# Provide options to choose source generators
if(NOT CPACK_SOURCE_GENERATOR)
if(UNIX)
if(CYGWIN)
option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON)
- else(CYGWIN)
+ else()
option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON)
option(CPACK_SOURCE_TGZ "Enable to build TGZ source packages" ON)
option(CPACK_SOURCE_TZ "Enable to build TZ source packages" ON)
option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" OFF)
- endif(CYGWIN)
- else(UNIX)
+ endif()
+ else()
option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON)
- endif(UNIX)
+ endif()
cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_CYGWIN CygwinSource)
cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TGZ TGZ)
cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TBZ2 TBZ2)
cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TZ TZ)
cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_ZIP ZIP)
-endif(NOT CPACK_SOURCE_GENERATOR)
+endif()
# mark the above options as advanced
mark_as_advanced(CPACK_BINARY_CYGWIN CPACK_BINARY_PACKAGEMAKER CPACK_BINARY_OSXX11
- CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2
- CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ
+ CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2
+ CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ
CPACK_BINARY_NSIS CPACK_BINARY_ZIP CPACK_BINARY_BUNDLE
- CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ
+ CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ
CPACK_SOURCE_TZ CPACK_SOURCE_ZIP CPACK_BINARY_DRAGNDROP)
# Set some other variables
@@ -435,16 +498,16 @@ cpack_set_if_not_set(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}")
cpack_set_if_not_set(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}")
# if the user has set CPACK_NSIS_DISPLAY_NAME remember it
if(DEFINED CPACK_NSIS_DISPLAY_NAME)
- SET(CPACK_NSIS_DISPLAY_NAME_SET TRUE)
+ set(CPACK_NSIS_DISPLAY_NAME_SET TRUE)
endif()
# if the user has set CPACK_NSIS_DISPLAY
# explicitly, then use that as the default
# value of CPACK_NSIS_PACKAGE_NAME instead
-# of CPACK_PACKAGE_INSTALL_DIRECTORY
+# of CPACK_PACKAGE_INSTALL_DIRECTORY
cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
if(CPACK_NSIS_DISPLAY_NAME_SET)
- string(REPLACE "\\" "\\\\"
+ string(REPLACE "\\" "\\\\"
_NSIS_DISPLAY_NAME_TMP "${CPACK_NSIS_DISPLAY_NAME}")
cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}")
else()
@@ -463,31 +526,31 @@ cpack_set_if_not_set(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
cpack_set_if_not_set(CPACK_NSIS_INSTALLER_ICON_CODE "")
cpack_set_if_not_set(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "")
-IF(DEFINED CPACK_COMPONENTS_ALL)
- IF(CPACK_MONOLITHIC_INSTALL)
- MESSAGE("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.")
- SET(CPACK_COMPONENTS_ALL)
- ELSE(CPACK_MONOLITHIC_INSTALL)
+if(DEFINED CPACK_COMPONENTS_ALL)
+ if(CPACK_MONOLITHIC_INSTALL)
+ message("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.")
+ set(CPACK_COMPONENTS_ALL)
+ else()
# The user has provided the set of components to be installed as
# part of a component-based installation; trust her.
- SET(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE)
- ENDIF(CPACK_MONOLITHIC_INSTALL)
-ELSE(DEFINED CPACK_COMPONENTS_ALL)
+ set(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE)
+ endif()
+else()
# If the user has not specifically requested a monolithic installer
# but has specified components in various "install" commands, tell
# CPack about those components.
- IF(NOT CPACK_MONOLITHIC_INSTALL)
- GET_CMAKE_PROPERTY(CPACK_COMPONENTS_ALL COMPONENTS)
- LIST(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN)
- IF(CPACK_COMPONENTS_LEN EQUAL 1)
+ if(NOT CPACK_MONOLITHIC_INSTALL)
+ get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS)
+ list(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN)
+ if(CPACK_COMPONENTS_LEN EQUAL 1)
# Only one component: this is not a component-based installation
# (at least, it isn't a component-based installation, but may
# become one later if the user uses the cpack_add_* commands).
- SET(CPACK_COMPONENTS_ALL)
- ENDIF(CPACK_COMPONENTS_LEN EQUAL 1)
- SET(CPACK_COMPONENTS_LEN)
- ENDIF(NOT CPACK_MONOLITHIC_INSTALL)
-ENDIF(DEFINED CPACK_COMPONENTS_ALL)
+ set(CPACK_COMPONENTS_ALL)
+ endif()
+ set(CPACK_COMPONENTS_LEN)
+ endif()
+endif()
# CMake always generates a component named "Unspecified", which is
# used to install everything that doesn't have an explicitly-provided
@@ -507,13 +570,13 @@ cpack_set_if_not_set(CPACK_SOURCE_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source")
cpack_set_if_not_set(CPACK_SOURCE_IGNORE_FILES
"/CVS/;/\\\\\\\\.svn/;/\\\\\\\\.bzr/;/\\\\\\\\.hg/;/\\\\\\\\.git/;\\\\\\\\.swp$;\\\\\\\\.#;/#")
-SET(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}")
-SET(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}")
-SET(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}")
-SET(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}")
-SET(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}")
-SET(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}")
-SET(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}")
+set(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}")
+set(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}")
+set(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}")
+set(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}")
+set(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}")
+set(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}")
+set(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}")
cpack_encode_variables()
configure_file("${cpack_source_input_file}"