diff options
Diffstat (limited to 'config')
119 files changed, 7787 insertions, 5532 deletions
diff --git a/config/apple b/config/apple index 0b15dfe..aba48d1 100644 --- a/config/apple +++ b/config/apple @@ -49,6 +49,7 @@ fi # Figure out compiler flags . $srcdir/config/gnu-flags +. $srcdir/config/clang-flags # temp patch: if GCC 4.2.1 is used in Lion or Mountain Lion systems, do not # use -O option as it causes failures in test/dt_arith. case "$host_os" in @@ -155,11 +156,13 @@ esac # get c++ version info case $CXX in clang++) + . $srcdir/config/clang-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'Apple' | sed 's/(.*//'` ;; *g++*) + . $srcdir/config/gnu-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'GCC' | sed 's/.*\((GCC) [-a-z0-9\. ]*.*\)/\1/'` ;; diff --git a/config/clang-cxxflags b/config/clang-cxxflags new file mode 100644 index 0000000..edd62e7 --- /dev/null +++ b/config/clang-cxxflags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang clang++ compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cxx_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang++ +# unless a compiler version is already known +# +# cxx_vendor: The compiler name: clang++ +# cxx_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cxx_flags_set"; then + # clang++ -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="clang" + else + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cxx_version"; then + + # Get the compiler version numbers + cxx_vers_major=`echo $cxx_version | cut -f1 -d.` + cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` + cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` + test -n "$cxx_vers_major" || cxx_vers_major=0 + test -n "$cxx_vers_minor" || cxx_vers_minor=0 + test -n "$cxx_vers_patch" || cxx_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cxx_vendor" -o "X-Apple LLVM" = "X-$cxx_vendor"; then + echo "compiler '$CXX' is $cxx_vendor-$cxx_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CXXFLAGS="$H5_CXXFLAGS -std=c++11" + ;; + esac + + H5_CXXFLAGS="$H5_CXXFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CXXFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CXXFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CXXFLAGS= + SYMBOLS_CXXFLAGS="-g -fno-omit-frame-pointer" + + ############# + # Profiling # + ############# + + PROFILE_CXXFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CXXFLAGS="-O3" + DEBUG_OPT_CXXFLAGS="-g" + NO_OPT_CXXFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CXXFLAGS="$H5_CXXFLAGS $(load_clang_arguments general)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cxx_flags_set=yes +fi + +# Clear cxx info if no flags set +if test "X$cxx_flags_set" = "X"; then + cxx_vendor= + cxx_version= +fi + diff --git a/config/clang-flags b/config/clang-flags new file mode 100644 index 0000000..b4f5e2e --- /dev/null +++ b/config/clang-flags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cc_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang +# unless a compiler version is already known +# +# cc_vendor: The compiler name: clang +# cc_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cc_flags_set"; then + # clang -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="clang" + else + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cc_version"; then + + # Get the compiler version numbers + cc_vers_major=`echo $cc_version | cut -f1 -d.` + cc_vers_minor=`echo $cc_version | cut -f2 -d.` + cc_vers_patch=`echo $cc_version | cut -f3 -d.` + test -n "$cc_vers_major" || cc_vers_major=0 + test -n "$cc_vers_minor" || cc_vers_minor=0 + test -n "$cc_vers_patch" || cc_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cc_vendor" -o "X-Apple LLVM" = "X-$cc_vendor"; then + echo "compiler '$CC' is $cc_vendor-$cc_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CFLAGS="$H5_CFLAGS -std=c99" + ;; + esac + + H5_CFLAGS="$H5_CFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CFLAGS= + SYMBOLS_CFLAGS="-g" + + ############# + # Profiling # + ############# + + PROFILE_CFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CFLAGS="-O3" + DEBUG_OPT_CFLAGS="-g" + NO_OPT_CFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CFLAGS="$H5_CFLAGS $(load_clang_arguments general)" + H5_ECFLAGS="$H5_ECFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cc_flags_set=yes +fi + +# Clear cc info if no flags set +if test "X$cc_flags_set" = "X"; then + cc_vendor= + cc_version= +fi + diff --git a/config/clang-warnings/developer-general b/config/clang-warnings/developer-general new file mode 100644 index 0000000..74d8404 --- /dev/null +++ b/config/clang-warnings/developer-general @@ -0,0 +1,4 @@ +-Wformat-nonliteral +-Wmissing-noreturn +-Wsometimes-uninitialized +-Wswitch-enum diff --git a/config/clang-warnings/error-general b/config/clang-warnings/error-general new file mode 100644 index 0000000..883dff7 --- /dev/null +++ b/config/clang-warnings/error-general @@ -0,0 +1,80 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +-Werror=bad-function-cast +-Werror=implicit-function-declaration +-Werror=incompatible-pointer-types +-Werror=missing-declarations +-Werror=packed +-Werror=shadow +-Werror=switch +# +# NOTE: Following files are not compatible with incompatible-pointer-types as errors +# src/H5Dchunk.c,src/H5Dint.c,src/H5Gint.c,src/H5HFcache.c,src/H5I.c,src/H5T.c +-Wno-error=incompatible-pointer-types-discards-qualifiers +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDdirect.c,H5FDmpio.c,H5FDros3.c, +# -Werror=unused-function +# +-Wunused-function +# +# H5FDdrvr_module.h +# -Werror=unused-variable +# +-Wunused-variable +# +# H5VLpassthru.c +# -Werror=unused-parameter +# +-Wunused-parameter +# +# +# +# NOTE: Tools files are not compatible with these warnings as errors +# lib/h5tools.c +# -Werror=cast-align +# +-Wcast-align +# +# lib/h5tools_utils.c +# -Werror=unused-parameter +# +# +# NOTE: JNI files are not compatible with these warnings as errors +# jni/h5pDCPLImp.c,jni/nativeData.c,jni/h5util.c,jni/h5rImp.c +# jni/h5sImp.c,jni/h5tImp.c +# -Werror=cast-align +# jni/h5util.c +# -Werror=format(-overflow) +# +-Wformat +# +# +#Examples and tests do not use the same set of extensive warning flags as libraries +# Here is a list of tests and examples that have issues with the stricter warnings as error +# +# NOTE: Test files are not compatible with these warnings as errors +# thread_id.c, +# -Werror=unused-function +# dsets.c +# -Werror=unused-parameter +# +# +# NOTE: Examples files are not compatible with these warnings as errors +# h5_vds-eiger.c,h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c,h5_vds-percival-unlim-maxmin.c +# h5_vds-percival.c,h5_read.c,h5_rdwt.c,h5_mount.c,h5_extend.c,h5_extend_write.c +# h5_write.c,h5_vds-simpleIO.c,h5_ref2reg_deprec.c,h5_crtgrp.c,h5_select.c +# h5_vds-percival-unlim.c,h5_crtatt.c,h5_group.c,h5_attribute.c,h5_crtdat.c +# h5_reference_deprec.c +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=strict-prototypes +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=old-style-definition +# h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c, +# -Werror=unused-variable +# h5_elink_unix2win.c,h5_extlink.c,h5_attribute.c +# -Werror=unused-parameter + diff --git a/config/clang-warnings/general b/config/clang-warnings/general new file mode 100644 index 0000000..f0c9b93 --- /dev/null +++ b/config/clang-warnings/general @@ -0,0 +1,26 @@ +# general clang warnings flags +-Wall +-Warray-bounds +-Wcast-qual +-Wconversion +-Wdouble-promotion +-Wextra +-Wformat=2 +-Wframe-larger-than=16384 +-Wimplicit-fallthrough +# +# NOTE: Due to the divergence in the C and C++, we're dropping support for +# compiling the C library with a C++ compiler and dropping the -Wc++-compat +# warning. +# +-Wno-c++-compat +# +# NOTE: Disable the -Wformat-nonliteral from -Wformat=2 here and re-add +# it to the developer flags. +# +-Wno-format-nonliteral +-Wnull-dereference +-Wunused-const-variable +-Wwrite-strings +-Wpedantic +-Wvolatile-register-var diff --git a/config/clang-warnings/no-developer-general b/config/clang-warnings/no-developer-general new file mode 100644 index 0000000..2bf1703 --- /dev/null +++ b/config/clang-warnings/no-developer-general @@ -0,0 +1 @@ +-Wno-missing-noreturn diff --git a/config/cmake/CMakeFindJavaCommon.cmake b/config/cmake/CMakeFindJavaCommon.cmake index eabb622..528791d 100644 --- a/config/cmake/CMakeFindJavaCommon.cmake +++ b/config/cmake/CMakeFindJavaCommon.cmake @@ -16,7 +16,7 @@ else() set(_JAVA_HOME_EXPLICIT 1) else() set(_CMD_JAVA_HOME "") - if(APPLE AND EXISTS /usr/libexec/java_home) + if(APPLE AND EXISTS "/usr/libexec/java_home") execute_process(COMMAND /usr/libexec/java_home OUTPUT_VARIABLE _CMD_JAVA_HOME OUTPUT_STRIP_TRAILING_WHITESPACE) endif() diff --git a/config/cmake/CTestCustom.cmake b/config/cmake/CTestCustom.cmake index 7aff076..725e382 100644 --- a/config/cmake/CTestCustom.cmake +++ b/config/cmake/CTestCustom.cmake @@ -11,26 +11,25 @@ # set (CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS 3000) # Allow full output to go to CDash set to 0 -SET(CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE 50000) -SET(CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE 50000) +set (CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE 50000) +set (CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE 50000) # WARNING! This could be a lot of output and could overwhelm CDash and the # MySQL DB so this might not be a good idea! set (CTEST_CUSTOM_WARNING_EXCEPTION ${CTEST_CUSTOM_WARNING_EXCEPTION} -# "H5detect.c.[0-9]+.[ \t]*:[ \t]*warning C4090:" -# "H5detect.c.[0-9]+.[ \t]*:[ \t]*warning:[ \t]*passing argument" -# "H5detect.c[0-9 \t:]*warning:[ \t]*passing argument" -# "note.*expected.*void.*but argument is of type.*volatile" -# "H5Tconv.c[0-9 \t:]*warning:[ \t]*comparison is always false due to limited range of data type" -# "H5Ztrans.c.[0-9]+.[ \t]*:[ \t]*warning C4244" -# "SZIP.src.*:[ \t]*warning" + "note.*expected.*void.*but argument is of type.*volatile" + "src.ZLIB.*:[ \t]*warning" + "warning LNK4197:.*ZLIB-prefix" + "src.SZIP.*:[ \t]*warning" # "POSIX name for this item is deprecated" "disabling jobserver mode" "config.cmake.xlatefile.c" -# "warning.*implicit declaration of function" + "warning.*unknown pragma" + "warning.*unrecognized .pragma" # "note: expanded from macro" -# "fpp:[ \t]*warning:[ \t]*cannot remove H5_DEBUG_API - not a predefined macro" + # HDDFFV-11074 + "This directive is not standard" ) set (CTEST_CUSTOM_MEMCHECK_IGNORE @@ -39,23 +38,34 @@ set (CTEST_CUSTOM_MEMCHECK_IGNORE H5TEST-flush2 #designed to need flush1 H5TEST-error_test #uses runTest.cmake H5TEST-err_compat #uses runTest.cmake - H5TEST-links_env #uses runTest.cmake H5TEST-testlibinfo #uses grepTest.cmake - H5TEST-clear-testhdf5-objects + ######### H5TEST-clear-objects - H5TEST-clear-cache-objects - H5TEST-clear-cache_api-objects - H5TEST-clear-cache_tagging-objects - H5TEST-clear-ttsafe-objects - H5TEST-clear-err_compat-objects - H5TEST-clear-error_test-objects - H5TEST-clear-links_env-objects + H5TEST-cache-clear-objects + H5TEST-cache_image-clear-objects + H5TEST-del_many_dense_attrs-clear-objects + H5TEST-external_env-clear-objects + H5TEST-filenotclosed-clear-objects + H5TEST-flush-clear-objects + H5TEST-links_env-clear-objects + H5TEST-testflushrefresh-clear-objects + H5TEST-testhdf5-clear-objects + H5TEST-vds_env-clear-objects PERFORM_h5perform-clear-objects - HL_TOOLS-clear-objects HL_test-clear-objects HL_FORTRAN_test-clear-objects FORTRAN_testhdf5-clear-objects + FORTRAN_flush1-clear-objects CPP_testhdf5-clear-objects + ######### examples ######### + EXAMPLES-clear-objects + CPP_ex-clear-objects + CPP_ex_tutr-clear-objects + HL_ex-clear-objects + f90_ex-clear-objects + HL_CPP_ptableTest-clear-objects + HL_CPP_ex_ptExampleFL-clear-objects + HL_FORTRAN_f90_ex-clear-objects ######### tools/h5clear ######### H5CLEAR-clearall-objects H5CLEAR-h5clear_gentest # does not close ids by design @@ -64,151 +74,81 @@ set (CTEST_CUSTOM_MEMCHECK_IGNORE ######### tools/h5diff ######### H5DIFF-clearall-objects ######### tools/h5dump ######### - H5DUMP-clearall-objects - H5DUMP_PACKED_BITS-clearall-objects - H5DUMP-XML-clearall-objects - H5DUMP_VDS-clearall-objects + H5DUMP-t128bit_float #uses grepTest.cmake ######### tools/h5format_convert ######### H5FC-clearall-objects ######### tools/h5import ######### H5IMPORT-h5importtest-clear-objects H5IMPORT-clear-objects ######### tools/h5jam ######### - H5JAM-SETUP-N_twithub_u10_c-clear-objects - H5JAM-SETUP-N_twithub_u10_c - H5JAM-N_twithub_u10_c-clear-objects - H5JAM-NONE_COPY-N_twithub_u10_c - H5JAM-CHECKFILE-N_twithub_u10_c-clear-objects - H5JAM-SETUP-N_twithub_u511_c-clear-objects - H5JAM-SETUP-N_twithub_u511_c - H5JAM-N_twithub_u511_c-clear-objects - H5JAM-NONE_COPY-N_twithub_u511_c - H5JAM-CHECKFILE-N_twithub_u511_c-clear-objects - H5JAM-SETUP-N_twithub_u512_c-clear-objects - H5JAM-SETUP-N_twithub_u512_c - H5JAM-N_twithub_u512_c-clear-objects - H5JAM-NONE_COPY-N_twithub_u512_c - H5JAM-CHECKFILE-N_twithub_u512_c-clear-objects - H5JAM-SETUP-N_twithub_u513_c-clear-objects - H5JAM-SETUP-N_twithub_u513_c - H5JAM-N_twithub_u513_c-clear-objects - H5JAM-NONE_COPY-N_twithub_u513_c - H5JAM-CHECKFILE-N_twithub_u513_c-clear-objects - H5JAM-SETUP-N_twithub513_u10_c-clear-objects - H5JAM-SETUP-N_twithub513_u10_c - H5JAM-N_twithub513_u10_c-clear-objects - H5JAM-NONE_COPY-N_twithub513_u10_c - H5JAM-CHECKFILE-N_twithub513_u10_c-clear-objects - H5JAM-SETUP-N_twithub513_u511_c-clear-objects - H5JAM-SETUP-N_twithub513_u511_c - H5JAM-N_twithub513_u511_c-clear-objects - H5JAM-NONE_COPY-N_twithub513_u511_c - H5JAM-CHECKFILE-N_twithub513_u511_c-clear-objects - H5JAM-SETUP-N_twithub513_u512_c-clear-objects - H5JAM-SETUP-N_twithub513_u512_c - H5JAM-N_twithub513_u512_c-clear-objects - H5JAM-NONE_COPY-N_twithub513_u512_c - H5JAM-CHECKFILE-N_twithub513_u512_c-clear-objects - H5JAM-SETUP-N_twithub513_u513_c-clear-objects - H5JAM-SETUP-N_twithub513_u513_c - H5JAM-N_twithub513_u513_c-clear-objects - H5JAM-NONE_COPY-N_twithub513_u513_c - H5JAM-CHECKFILE-N_twithub513_u513_c-clear-objects - H5JAM-CHECKFILE-twithub_u10_c-clear-objects - H5JAM-twithub_u511_c-clear-objects - H5JAM-CHECKFILE-twithub_u511_c-clear-objects - H5JAM-twithub_u512_c-clear-objects - H5JAM-CHECKFILE-twithub_u512_c-clear-objects - H5JAM-twithub_u513_c-clear-objects - H5JAM-CHECKFILE-twithub_u513_c-clear-objects - H5JAM-twithub513_u10_c-clear-objects - H5JAM-CHECKFILE-twithub513_u10_c-clear-objects - H5JAM-twithub513_u511_c-clear-objects - H5JAM-CHECKFILE-twithub513_u511_c-clear-objects - H5JAM-twithub513_u512_c-clear-objects - H5JAM-CHECKFILE-twithub513_u512_c-clear-objects - H5JAM-twithub513_u513_c-clear-objects - H5JAM-CHECKFILE-twithub513_u513_c-clear-objects - H5JAM-SETUP-twithub_tall-clear-objects - H5JAM-SETUP-twithub_tall - H5JAM-UNJAM-twithub_tall-clear-objects - H5JAM-UNJAM_D-twithub_tall-clear-objects - H5JAM-CHECKFILE-twithub_tall-clear-objects - H5JAM-SETUP-twithub513_tall-clear-objects - H5JAM-SETUP-twithub513_tall - H5JAM-UNJAM-twithub513_tall-clear-objects - H5JAM-UNJAM_D-twithub513_tall-clear-objects - H5JAM-CHECKFILE-twithub513_tall-clear-objects - H5JAM-SETUP-N_twithub_tall-clear-objects - H5JAM-SETUP-N_twithub_tall - H5JAM-UNJAM-N_twithub_tall-clear-objects - H5JAM-UNJAM_D-N_twithub_tall-clear-objects - H5JAM-CHECKFILE-N_twithub_tall-clear-objects - H5JAM-SETUP-N_twithub513_tall-clear-objects - H5JAM-SETUP-N_twithub513_tall - H5JAM-UNJAM-N_twithub513_tall-clear-objects - H5JAM-UNJAM_D-N_twithub513_tall-clear-objects - H5JAM-CHECKFILE-N_twithub513_tall-clear-objects - H5JAM-SETUP-D_twithub_tall-clear-objects - H5JAM-SETUP-D_twithub_tall - H5JAM-UNJAM-D_twithub_tall-clear-objects - H5JAM-UNJAM_D-D_twithub_tall-clear-objects - H5JAM-CHECKFILE-D_twithub_tall-clear-objects - H5JAM-SETUP-D_twithub513_tall-clear-objects - H5JAM-SETUP-D_twithub513_tall - H5JAM-UNJAM-D_twithub513_tall-clear-objects - H5JAM-UNJAM_D-D_twithub513_tall-clear-objects - H5JAM-CHECKFILE-D_twithub513_tall-clear-objects - H5JAM-CHECKFILE-ta_u513-clear-objects - H5JAM-twithub_u10-clear-objects - H5JAM-CHECKFILE-twithub_u10-clear-objects - H5JAM-twithub_u511-clear-objects - H5JAM-CHECKFILE-twithub_u511-clear-objects - H5JAM-twithub_u512-clear-objects - H5JAM-CHECKFILE-twithub_u512-clear-objects - H5JAM-twithub_u513-clear-objects - H5JAM-CHECKFILE-twithub_u513-clear-objects - H5JAM-twithub513_u10-clear-objects - H5JAM-CHECKFILE-twithub513_u10-clear-objects - H5JAM-twithub513_u511-clear-objects - H5JAM-CHECKFILE-twithub513_u511-clear-objects - H5JAM-twithub513_u512-clear-objects - H5JAM-CHECKFILE-twithub513_u512-clear-objects - H5JAM-twithub513_u513-clear-objects - H5JAM-CHECKFILE-twithub513_u513-clear-objects - H5JAM-twithub_u10_c-clear-objects - H5JAM-tall_u10-clear-objects - H5JAM-CHECKFILE-tall_u10-clear-objects - H5JAM-tall_u511-clear-objects - H5JAM-CHECKFILE-tall_u511-clear-objects - H5JAM-tall_u512-clear-objects - H5JAM-CHECKFILE-tall_u512-clear-objects - H5JAM-tall_u513-clear-objects - H5JAM-CHECKFILE-tall_u513-clear-objects - H5JAM-SETUP-ta_u10-clear-objects - H5JAM-SETUP-ta_u10 - H5JAM-ta_u10-clear-objects - H5JAM-NONE_COPY-ta_u10 - H5JAM-CHECKFILE-ta_u10-clear-objects - H5JAM-SETUP-ta_u511-clear-objects - H5JAM-SETUP-ta_u511 - H5JAM-ta_u511-clear-objects - H5JAM-NONE_COPY-ta_u511 - H5JAM-CHECKFILE-ta_u511-clear-objects - H5JAM-SETUP-ta_u512-clear-objects - H5JAM-SETUP-ta_u512 - H5JAM-ta_u512-clear-objects - H5JAM-NONE_COPY-ta_u512 - H5JAM-CHECKFILE-ta_u512-clear-objects - H5JAM-SETUP-ta_u513-clear-objects - H5JAM-SETUP-ta_u513 - H5JAM-ta_u513-clear-objects - H5JAM-NONE_COPY-ta_u513 ######### tools/h5ls ######### H5LS-clearall-objects H5LS_VDS-clearall-objects ######### tools/h5repack ######### H5REPACK-clearall-objects + H5REPACK-add_alignment-clear-objects + H5REPACK-add_userblock-clear-objects + H5REPACK-all_filters-clear-objects + H5REPACK-attr-clear-objects + H5REPACK-committed_dt-clear-objects + H5REPACK-deflate_convert-clear-objects + H5REPACK-deflate_copy-clear-objects + H5REPACK-deflate_file-clear-objects + H5REPACK-deflate_remove-clear-objects + H5REPACK-early-clear-objects + H5REPACK-error4-clear-objects + H5REPACK-family-clear-objects + H5REPACK-fill-clear-objects + H5REPACK-fletcher_all-clear-objects + H5REPACK-fletcher_copy-clear-objects + H5REPACK-fletcher_individual-clear-objects + H5REPACK-fletcher_remove-clear-objects + H5REPACK-global_filters-clear-objects + H5REPACK-gt_mallocsize-clear-objects + H5REPACK-gzip_all-clear-objects + H5REPACK-gzip_individual-clear-objects + H5REPACK-hlink-clear-objects + H5REPACK-layout-clear-objects + H5REPACK-native_attr-clear-objects + H5REPACK-native_fill-clear-objects + H5REPACK-nbit_add-clear-objects + H5REPACK-nbit_copy-clear-objects + H5REPACK-nbit_remove-clear-objects + H5REPACK-nested_8bit_enum-clear-objects + H5REPACK-objs-clear-objects + H5REPACK-remove_all-clear-objects + H5REPACK-scale_add-clear-objects + H5REPACK-scale_copy-clear-objects + H5REPACK-scale_remove-clear-objects + H5REPACK-shuffle_all-clear-objects + H5REPACK-shuffle_copy-clear-objects + H5REPACK-shuffle_individual-clear-objects + H5REPACK-shuffle_remove-clear-objects + H5REPACK-szip_all-clear-objects + H5REPACK-szip_convert-clear-objects + H5REPACK-szip_copy-clear-objects + H5REPACK-szip_individual-clear-objects + H5REPACK-szip_remove-clear-objects + H5REPACK-upgrade_layout-clear-objects + H5REPACK_DMP-attrregion-clear-objects + H5REPACK_DMP-crtorder-clear-objects + H5REPACK_DMP-dataregion-clear-objects + H5REPACK_DMP-deflate_limit-clear-objects + H5REPACK-bug1814-clear-objects + H5REPACK-HDFFV-5932-clear-objects + H5REPACK-HDFFV-7840-clear-objects + H5REPACK_META-meta_long-clear-objects + H5REPACK_META-meta_short-clear-objects + H5REPACK_STAT-GS_AGGR-clear-objects + H5REPACK_STAT-S_AGGR-clear-objects + H5REPACK_STAT-SP_NONE-clear-objects + H5REPACK_STAT-SP_PAGE-clear-objects + H5REPACK_STAT-SPT_FSM_AGGR-clear-objects + H5REPACK_STAT-STG_PAGE-clear-objects + ######### + H5REPACK_META-meta_long + H5REPACK_META-meta_short + ######### H5REPACK-gzip_verbose_filters #uses runTest.cmake H5REPACK_VERIFY_LAYOUT-dset2_chunk_20x10 #uses grepTest.cmake H5REPACK_VERIFY_LAYOUT_ALL-chunk_20x10 #uses grepTest.cmake @@ -231,18 +171,19 @@ set (CTEST_CUSTOM_MEMCHECK_IGNORE H5REPACK_VERIFY_LAYOUT_ALL-layout_short_switches #uses grepTest.cmake H5REPACK-plugin H5REPACK_CMP-plugin_zero + ######### + ADD_H5_VERIFY_INVALIDBOUNDS-h5repack-latest_latest_invalid-clear-objects + H5REPACK_VERIFY_SUPERBLOCK-SB_IS_0-clear-objects + H5REPACK_VERIFY_SUPERBLOCK-SB_IS_2-clear-objects + H5REPACK_VERIFY_SUPERBLOCK-SB_IS_3-clear-objects ######### tools/h5stat ######### H5STAT-clearall-objects ######### tools/misc ######### H5REPART-clearall-objects H5MKGRP-clearall-objects - ######### hl/tools/h5watch ######### + ######### tools/perform ######### + PERFORM_h5perform-clearall-objects + ######### hl/tools ######### + HL_TOOLS-clear-objects H5WATCH-clearall-objects - ######### examples ######### - EXAMPLES-clear-objects - CPP_ex-clear-objects - CPP_ex_tutr-clear-objects - HL_ex-clear-objects - f90_ex-clear-objects - HL_FORTRAN_f90_ex-clear-objects ) diff --git a/config/cmake/CTestScript.cmake b/config/cmake/CTestScript.cmake index c59b10c..5478862 100755..100644 --- a/config/cmake/CTestScript.cmake +++ b/config/cmake/CTestScript.cmake @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required (VERSION 3.2.2 FATAL_ERROR) +cmake_minimum_required (VERSION 3.12) ######################################################## # For any comments please contact cdashhelp@hdfgroup.org # @@ -63,13 +63,6 @@ if (APPLE) set (ENV{CC} "${XCODE_CC}") set (ENV{CXX} "${XCODE_CXX}") - if (NOT NO_MAC_FORTRAN) - # Shared fortran is not supported, build static - set (BUILD_OPTIONS "${BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF -DCMAKE_ANSI_CFLAGS:STRING=-fPIC") - else () - set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=OFF") - endif () - set (BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=ON -DCMAKE_BUILD_WITH_INSTALL_RPATH:BOOL=OFF") endif () @@ -79,7 +72,7 @@ set (CTEST_CMAKE_COMMAND "\"${CMAKE_COMMAND}\"") if (CTEST_USE_TAR_SOURCE) ## Uncompress source if tar or zip file provided ## -------------------------- - if (WIN32) + if (WIN32 AND NOT MINGW) message (STATUS "extracting... [${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip]") execute_process (COMMAND ${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip RESULT_VARIABLE rv) else () @@ -108,6 +101,11 @@ endif () include (ProcessorCount) ProcessorCount (N) if (NOT N EQUAL 0) + if (MAX_PROC_COUNT) + if (N GREATER MAX_PROC_COUNT) + set (N ${MAX_PROC_COUNT}) + endif () + endif () if (NOT WIN32) set (CTEST_BUILD_FLAGS -j${N}) endif () @@ -121,8 +119,12 @@ set(CTEST_CONFIGURE_TOOLSET "") if(CMAKE_GENERATOR_TOOLSET) set(CTEST_CONFIGURE_TOOLSET "-T${CMAKE_GENERATOR_TOOLSET}") endif() +set(CTEST_CONFIGURE_ARCHITECTURE "") +if(CMAKE_GENERATOR_ARCHITECTURE) + set(CTEST_CONFIGURE_ARCHITECTURE "-A${CMAKE_GENERATOR_ARCHITECTURE}") +endif() set (CTEST_CONFIGURE_COMMAND - "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\"" + "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_ARCHITECTURE}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\"" ) #----------------------------------------------------------------------------- diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake index 0848e66..2930969 100644 --- a/config/cmake/ConfigureChecks.cmake +++ b/config/cmake/ConfigureChecks.cmake @@ -16,7 +16,7 @@ set (HDF_PREFIX "H5") include (${HDF_RESOURCES_EXT_DIR}/ConfigureChecks.cmake) if (HDF5_ENABLE_USING_MEMCHECKER) - set (H5_USING_MEMCHECKER 1) + set (${HDF_PREFIX}_USING_MEMCHECKER 1) endif () #----------------------------------------------------------------------------- @@ -24,28 +24,19 @@ endif () #----------------------------------------------------------------------------- option (HDF5_STRICT_FORMAT_CHECKS "Whether to perform strict file format checks" OFF) if (HDF5_STRICT_FORMAT_CHECKS) - set (H5_STRICT_FORMAT_CHECKS 1) + set (${HDF_PREFIX}_STRICT_FORMAT_CHECKS 1) endif () MARK_AS_ADVANCED (HDF5_STRICT_FORMAT_CHECKS) -#----------------------------------------------------------------------------- -# Option for --enable-metadata-trace-file -#----------------------------------------------------------------------------- -option (HDF5_METADATA_TRACE_FILE "Enable metadata trace file collection" OFF) -if (HDF5_METADATA_TRACE_FILE) - set (H5_METADATA_TRACE_FILE 1) -endif () -MARK_AS_ADVANCED (HDF5_METADATA_TRACE_FILE) - # ---------------------------------------------------------------------- # Decide whether the data accuracy has higher priority during data # conversions. If not, some hard conversions will still be prefered even # though the data may be wrong (for example, some compilers don't # support denormalized floating values) to maximize speed. -# +#----------------------------------------------------------------------------- option (HDF5_WANT_DATA_ACCURACY "IF data accuracy is guaranteed during data conversions" ON) if (HDF5_WANT_DATA_ACCURACY) - set (H5_WANT_DATA_ACCURACY 1) + set (${HDF_PREFIX}_WANT_DATA_ACCURACY 1) endif () MARK_AS_ADVANCED (HDF5_WANT_DATA_ACCURACY) @@ -54,19 +45,19 @@ MARK_AS_ADVANCED (HDF5_WANT_DATA_ACCURACY) # checked and data conversion exceptions are returned. This is mainly # for the speed optimization of hard conversions. Soft conversions can # actually benefit little. -# +#----------------------------------------------------------------------------- option (HDF5_WANT_DCONV_EXCEPTION "exception handling functions is checked during data conversions" ON) if (HDF5_WANT_DCONV_EXCEPTION) - set (H5_WANT_DCONV_EXCEPTION 1) + set (${HDF_PREFIX}_WANT_DCONV_EXCEPTION 1) endif () MARK_AS_ADVANCED (HDF5_WANT_DCONV_EXCEPTION) # ---------------------------------------------------------------------- # Check if they would like the function stack support compiled in -# +#----------------------------------------------------------------------------- option (HDF5_ENABLE_CODESTACK "Enable the function stack tracing (for developer debugging)." OFF) if (HDF5_ENABLE_CODESTACK) - set (H5_HAVE_CODESTACK 1) + set (${HDF_PREFIX}_HAVE_CODESTACK 1) endif () MARK_AS_ADVANCED (HDF5_ENABLE_CODESTACK) @@ -79,49 +70,50 @@ if (HDF5_ENABLE_HSIZET) endif () # so far we have no check for this -set (H5_HAVE_TMPFILE 1) +set (${HDF_PREFIX}_HAVE_TMPFILE 1) # TODO -------------------------------------------------------------------------- # Should the Default Virtual File Driver be compiled? # This is hard-coded now but option should added to match configure -# -set (H5_DEFAULT_VFD H5FD_SEC2) +#----------------------------------------------------------------------------- +set (${HDF_PREFIX}_DEFAULT_VFD H5FD_SEC2) -if (NOT DEFINED "H5_DEFAULT_PLUGINDIR") +if (NOT DEFINED "${HDF_PREFIX}_DEFAULT_PLUGINDIR") if (WINDOWS) - set (H5_DEFAULT_PLUGINDIR "%ALLUSERSPROFILE%\\\\hdf5\\\\lib\\\\plugin") + set (${HDF_PREFIX}_DEFAULT_PLUGINDIR "%ALLUSERSPROFILE%\\\\hdf5\\\\lib\\\\plugin") else () - set (H5_DEFAULT_PLUGINDIR "/usr/local/hdf5/lib/plugin") + set (${HDF_PREFIX}_DEFAULT_PLUGINDIR "/usr/local/hdf5/lib/plugin") endif () endif () if (WINDOWS) - set (H5_HAVE_WINDOWS 1) + set (${HDF_PREFIX}_HAVE_WINDOWS 1) # ---------------------------------------------------------------------- # Set the flag to indicate that the machine has window style pathname, # that is, "drive-letter:\" (e.g. "C:") or "drive-letter:/" (e.g. "C:/"). # (This flag should be _unset_ for all machines, except for Windows) - set (H5_HAVE_WINDOW_PATH 1) + #----------------------------------------------------------------------- + set (${HDF_PREFIX}_HAVE_WINDOW_PATH 1) endif () # ---------------------------------------------------------------------- # END of WINDOWS Hard code Values # ---------------------------------------------------------------------- -CHECK_FUNCTION_EXISTS (difftime H5_HAVE_DIFFTIME) +CHECK_FUNCTION_EXISTS (difftime ${HDF_PREFIX}_HAVE_DIFFTIME) # Find the library containing clock_gettime() -if (NOT WINDOWS) +if (MINGW OR NOT WINDOWS) CHECK_FUNCTION_EXISTS (clock_gettime CLOCK_GETTIME_IN_LIBC) CHECK_LIBRARY_EXISTS (rt clock_gettime "" CLOCK_GETTIME_IN_LIBRT) CHECK_LIBRARY_EXISTS (posix4 clock_gettime "" CLOCK_GETTIME_IN_LIBPOSIX4) if (CLOCK_GETTIME_IN_LIBC) - set (H5_HAVE_CLOCK_GETTIME 1) + set (${HDF_PREFIX}_HAVE_CLOCK_GETTIME 1) elseif (CLOCK_GETTIME_IN_LIBRT) - set (H5_HAVE_CLOCK_GETTIME 1) + set (${HDF_PREFIX}_HAVE_CLOCK_GETTIME 1) list (APPEND LINK_LIBS rt) elseif (CLOCK_GETTIME_IN_LIBPOSIX4) - set (H5_HAVE_CLOCK_GETTIME 1) + set (${HDF_PREFIX}_HAVE_CLOCK_GETTIME 1) list (APPEND LINK_LIBS posix4) endif () endif () @@ -164,22 +156,60 @@ if (NOT WINDOWS) endif () #----------------------------------------------------------------------------- +# Check if ROS3 driver can be built +#----------------------------------------------------------------------------- +option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF) + if (HDF5_ENABLE_ROS3_VFD) + find_package(CURL REQUIRED) + find_package(OpenSSL REQUIRED) + if (${CURL_FOUND} AND ${OPENSSL_FOUND}) + set (${HDF_PREFIX}_HAVE_ROS3_VFD 1) + list (APPEND LINK_LIBS ${CURL_LIBRARIES} ${OPENSSL_LIBRARIES}) + INCLUDE_DIRECTORIES (${CURL_INCLUDE_DIRS} ${OPENSSL_INCLUDE_DIR}) + else () + message (STATUS "The Read-Only S3 VFD was requested but cannot be built.\nPlease check that openssl and cURL are available on your\nsystem, and/or re-configure without option HDF5_ENABLE_ROS3_VFD.") + endif () +endif () + +# ---------------------------------------------------------------------- +# Check whether we can build the Mirror VFD +# Header-check flags set in config/cmake_ext_mod/ConfigureChecks.cmake +# ---------------------------------------------------------------------- +option (HDF5_ENABLE_MIRROR_VFD "Build the Mirror Virtual File Driver" OFF) +if (H5FD_ENABLE_MIRROR_VFD) + if ( ${HDF_PREFIX}_HAVE_NETINET_IN_H AND + ${HDF_PREFIX}_HAVE_NETDB_H AND + ${HDF_PREFIX}_HAVE_ARPA_INET_H AND + ${HDF_PREFIX}_HAVE_SYS_SOCKET_H AND + ${HDF_PREFIX}_HAVE_FORK) + set (${HDF_PREFIX}_HAVE_MIRROR_VFD 1) + else() + message(STATUS "The socket-based Mirror VFD was requested but cannot be built. System prerequisites are not met.") + endif() +endif() + +#----------------------------------------------------------------------------- # Check if C has __float128 extension #----------------------------------------------------------------------------- -CHECK_TYPE_SIZE("__float128" SIZEOF___FLOAT128) -if (${HAVE_SIZEOF___FLOAT128}) - set (H5_HAVE_FLOAT128 1) +CHECK_TYPE_SIZE("__float128" ${HDF_PREFIX}_SIZEOF___FLOAT128) +if (${${HDF_PREFIX}_SIZEOF___FLOAT128}) + set (${HDF_PREFIX}_HAVE_FLOAT128 1) else () - set (H5_HAVE_FLOAT128 0) - set (SIZEOF___FLOAT128 0) + set (${HDF_PREFIX}_HAVE_FLOAT128 0) + set (${HDF_PREFIX}_SIZEOF___FLOAT128 0) +endif () + +CHECK_TYPE_SIZE("_Quad" ${HDF_PREFIX}_SIZEOF__QUAD) +if (NOT ${${HDF_PREFIX}_SIZEOF__QUAD}) + set (${HDF_PREFIX}_SIZEOF__QUAD 0) endif () #----------------------------------------------------------------------------- # Macro to determine the various conversion capabilities #----------------------------------------------------------------------------- macro (H5ConversionTests TEST msg) - if ("${TEST}" MATCHES "^${TEST}$") + if (NOT DEFINED ${TEST}) # message (STATUS "===> ${TEST}") TRY_RUN (${TEST}_RUN ${TEST}_COMPILE ${CMAKE_BINARY_DIR} @@ -210,21 +240,6 @@ macro (H5ConversionTests TEST msg) endmacro () #----------------------------------------------------------------------------- -# Macro to make some of the conversion tests easier to write/read -#----------------------------------------------------------------------------- -macro (H5MiscConversionTest VAR TEST msg) - if ("${TEST}" MATCHES "^${TEST}$") - if (${VAR}) - set (${TEST} 1 CACHE INTERNAL ${msg}) - message (STATUS "${msg}... yes") - else () - set (${TEST} "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") - endif () - endif () -endmacro () - -#----------------------------------------------------------------------------- # Check various conversion capabilities #----------------------------------------------------------------------------- @@ -236,8 +251,8 @@ endmacro () # is 0x004733ce17af227f, not the same as the library's conversion to 0x004733ce17af2282. # The machine's conversion gets the correct value. We define the macro and disable # this kind of test until we figure out what algorithm they use. -# -H5ConversionTests (H5_LDOUBLE_TO_LONG_SPECIAL "Checking IF your system converts long double to (unsigned) long values with special algorithm") +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_LDOUBLE_TO_LONG_SPECIAL "Checking IF your system converts long double to (unsigned) long values with special algorithm") # ---------------------------------------------------------------------- # Set the flag to indicate that the machine is using a special algorithm # to convert some values of '(unsigned) long' to 'long double' values. @@ -245,8 +260,8 @@ H5ConversionTests (H5_LDOUBLE_TO_LONG_SPECIAL "Checking IF your system converts # when the bit sequences are 003fff..., 007fff..., 00ffff..., 01ffff..., # ..., 7fffff..., the compiler uses a unknown algorithm. We define a # macro and skip the test for now until we know about the algorithm. -# -H5ConversionTests (H5_LONG_TO_LDOUBLE_SPECIAL "Checking IF your system can convert (unsigned) long to long double values with special algorithm") +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_LONG_TO_LDOUBLE_SPECIAL "Checking IF your system can convert (unsigned) long to long double values with special algorithm") # ---------------------------------------------------------------------- # Set the flag to indicate that the machine can accurately convert # 'long double' to '(unsigned) long long' values. (This flag should be set for @@ -255,32 +270,22 @@ H5ConversionTests (H5_LONG_TO_LDOUBLE_SPECIAL "Checking IF your system can conve # start to go wrong on these two machines. Adjusting it higher to # 0x4351ccf385ebc8a0dfcc... or 0x4351ccf385ebc8a0ffcc... will make the converted # values wildly wrong. This test detects this wrong behavior and disable the test. -# -H5ConversionTests (H5_LDOUBLE_TO_LLONG_ACCURATE "Checking IF correctly converting long double to (unsigned) long long values") +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_LDOUBLE_TO_LLONG_ACCURATE "Checking IF correctly converting long double to (unsigned) long long values") # ---------------------------------------------------------------------- # Set the flag to indicate that the machine can accurately convert # '(unsigned) long long' to 'long double' values. (This flag should be set for # all machines, except for Mac OS 10.4, when the bit sequences are 003fff..., # 007fff..., 00ffff..., 01ffff..., ..., 7fffff..., the converted values are twice # as big as they should be. -# -H5ConversionTests (H5_LLONG_TO_LDOUBLE_CORRECT "Checking IF correctly converting (unsigned) long long to long double values") +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_LLONG_TO_LDOUBLE_CORRECT "Checking IF correctly converting (unsigned) long long to long double values") +# ---------------------------------------------------------------------- +# Set the flag to indicate that the machine can accurately convert +# some long double values +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_DISABLE_SOME_LDOUBLE_CONV "Checking IF the cpu is power9 and cannot correctly converting long double values") # ---------------------------------------------------------------------- # Check if pointer alignments are enforced -# -H5ConversionTests (H5_NO_ALIGNMENT_RESTRICTIONS "Checking IF alignment restrictions are strictly enforced") - -# ----------------------------------------------------------------------- -# wrapper script variables -# -set (prefix ${CMAKE_INSTALL_PREFIX}) -set (exec_prefix "\${prefix}") -set (libdir "${exec_prefix}/lib") -set (includedir "\${prefix}/include") -set (host_os ${CMAKE_HOST_SYSTEM_NAME}) -set (CC ${CMAKE_C_COMPILER}) -set (CXX ${CMAKE_CXX_COMPILER}) -set (FC ${CMAKE_Fortran_COMPILER}) -foreach (LINK_LIB ${LINK_LIBS}) - set (LIBS "${LIBS} -l${LINK_LIB}") -endforeach () +#----------------------------------------------------------------------------- +H5ConversionTests (${HDF_PREFIX}_NO_ALIGNMENT_RESTRICTIONS "Checking IF alignment restrictions are strictly enforced") diff --git a/config/cmake/ConversionTests.c b/config/cmake/ConversionTests.c index 082dbd4..6d597a0 100644 --- a/config/cmake/ConversionTests.c +++ b/config/cmake/ConversionTests.c @@ -9,12 +9,23 @@ * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#if defined(__has_attribute) +#if __has_attribute(no_sanitize) +#define HDF_NO_UBSAN __attribute__((no_sanitize("undefined"))) +#else +#define HDF_NO_UBSAN +#endif +#else +#define HDF_NO_UBSAN +#endif + #ifdef H5_LDOUBLE_TO_LONG_SPECIAL_TEST #include <string.h> #include <stdlib.h> -int main(void) +int HDF_NO_UBSAN main(void) { long double ld = 20041683600089727.779961L; long ll; @@ -24,44 +35,44 @@ int main(void) int ret = 1; if(sizeof(long double) == 16 && sizeof(long) == 8) { - /*make sure the long double type has 16 bytes in size and - * 11 bits of exponent. If it is, - *the bit sequence should be like below. It's not - *a decent way to check but this info isn't available. */ - memcpy(s, &ld, 16); - if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 && - s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 && - s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) { - - /* Assign the hexadecimal value of long double type. */ - s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3; - s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0; - s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c; - s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20; - - memcpy(&ld, s, 16); - - ll = (long)ld; - memcpy(s2, &ll, 8); - - /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82 - * and gets wrong value 20041683600089730 on the IBM Power6 Linux. - * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f - * and gets the correct value 20041683600089727. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && - s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) - ret = 0; - - ull = (unsigned long)ld; - memcpy(s2, &ull, 8); - - /* The unsigned long is the same as signed long. */ - if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && - s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) - ret = 0; - } + /*make sure the long double type has 16 bytes in size and + * 11 bits of exponent. If it is, + *the bit sequence should be like below. It's not + *a decent way to check but this info isn't available. */ + memcpy(s, &ld, 16); + if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 && + s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 && + s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) { + + /* Assign the hexadecimal value of long double type. */ + s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3; + s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0; + s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c; + s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20; + + memcpy(&ld, s, 16); + + ll = (long)ld; + memcpy(s2, &ll, 8); + + /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82 + * and gets wrong value 20041683600089730 on the IBM Power6 Linux. + * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f + * and gets the correct value 20041683600089727. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && + s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) + ret = 0; + + ull = (unsigned long)ld; + memcpy(s2, &ull, 8); + + /* The unsigned long is the same as signed long. */ + if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && + s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) + ret = 0; + } } done: @@ -75,7 +86,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int HDF_NO_UBSAN main(void) { long double ld; long ll; @@ -86,46 +97,46 @@ int main(void) /*Determine if long double has 16 byte in size, 11 bit exponent, and *the bias is 0x3ff */ if(sizeof(long double) == 16) { - ld = 1.0L; - memcpy(s, &ld, 16); - if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00) - flag = 1; + ld = 1.0L; + memcpy(s, &ld, 16); + if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00) + flag = 1; } if(flag==1 && sizeof(long)==8) { - ll = 0x003fffffffffffffL; - ld = (long double)ll; - memcpy(s, &ld, 16); - /* The library converts the value to 0x434fffffffffffff8000000000000000. - * In decimal it is 18014398509481982.000000, one value short of the original. - * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000. - * The value is correct in decimal. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && - s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && - s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) - ret = 0; + ll = 0x003fffffffffffffL; + ld = (long double)ll; + memcpy(s, &ld, 16); + /* The library converts the value to 0x434fffffffffffff8000000000000000. + * In decimal it is 18014398509481982.000000, one value short of the original. + * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000. + * The value is correct in decimal. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && + s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && + s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) + ret = 0; } if(flag==1 && sizeof(unsigned long)==8) { - ull = 0xffffffffffffffffUL; - ld = (long double)ull; - memcpy(s, &ld, 16); - /* Use a different value from signed long to test. The problem is the same - * for both long and unsigned long. The value is 18446744073709551615. - * The library converts the value to 0x43effffffffffffffe000000000000000. - * In decimal it's 18446744073709548544.000000, very different from the original. - * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000. - * The value is correct in decimal. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && - s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && - s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) - ret = 0; + ull = 0xffffffffffffffffUL; + ld = (long double)ull; + memcpy(s, &ld, 16); + /* Use a different value from signed long to test. The problem is the same + * for both long and unsigned long. The value is 18446744073709551615. + * The library converts the value to 0x43effffffffffffffe000000000000000. + * In decimal it's 18446744073709548544.000000, very different from the original. + * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000. + * The value is correct in decimal. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && + s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && + s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) + ret = 0; } done: exit(ret); @@ -138,7 +149,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int HDF_NO_UBSAN main(void) { long double ld = 20041683600089727.779961L; long long ll; @@ -181,7 +192,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int HDF_NO_UBSAN main(void) { long double ld; long long ll; @@ -242,7 +253,7 @@ int FC_DUMMY_MAIN() { return 1;} #endif #endif -int +int HDF_NO_UBSAN main () { @@ -276,3 +287,27 @@ main () #endif +#ifdef H5_DISABLE_SOME_LDOUBLE_CONV_TEST + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +int HDF_NO_UBSAN main(void) +{ + FILE *fp; + char cpu[64]; + + fp = popen("uname -m", "r"); + + fgets(cpu, sizeof(cpu)-1, fp); + + pclose(fp); + + if(strncmp(cpu, "ppc64le", 7) == 0) + return 0; + + return 1; +} + +#endif diff --git a/config/cmake/FindHDFJAVA.cmake.in b/config/cmake/FindHDFJAVA.cmake.in deleted file mode 100644 index ed2b8c2..0000000 --- a/config/cmake/FindHDFJAVA.cmake.in +++ /dev/null @@ -1,79 +0,0 @@ -# -# Copyright by The HDF Group. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -# -# -# To be used by projects that make use of CMakeified hdf-java -# - -# -# Find the HDFJAVA includes and get all installed hdf-java library settings from -# HDFJAVA-config.cmake file : Requires a CMake compatible hdf-java-@HDFJAVA_PACKAGE_VERSION@ or later -# for this feature to work. The following vars are set if hdf-java is found. -# -# HDFJAVA_FOUND - True if found, otherwise all other vars are undefined -# HDFJAVA_VERSION_STRING - full version (e.g. @HDFJAVA_PACKAGE_VERSION@) -# HDFJAVA_VERSION_MAJOR - major part of version (e.g. @HDFJAVA_PACKAGE_VERSION_MAJOR@) -# HDFJAVA_VERSION_MINOR - minor part (e.g. @HDFJAVA_PACKAGE_VERSION_MINOR@) -# -# Target names that are valid (depending on enabled options) -# will be the following -# -# -# To aid in finding HDFJAVA as part of a subproject set -# HDFJAVA_ROOT_DIR_HINT to the location where @HDFJAVA_PACKAGE@@HDF_PACKAGE_EXT@-config.cmake lies - -INCLUDE (SelectLibraryConfigurations) -INCLUDE (FindPackageHandleStandardArgs) - -# The HINTS option should only be used for values computed from the system. -set (_HDFJAVA_HINTS - $ENV{HOME}/.local - $ENV{HDFJAVA_ROOT} - $ENV{HDFJAVA_ROOT_DIR_HINT} -) -# Hard-coded guesses should still go in PATHS. This ensures that the user -# environment can always override hard guesses. -set (_HDFJAVA_PATHS - $ENV{HOME}/.local - $ENV{HDFJAVA_ROOT} - $ENV{HDFJAVA_ROOT_DIR_HINT} - /usr/lib/@HDFJAVA_PACKAGE@ - /usr/share/@HDFJAVA_PACKAGE@ - /usr/local/@HDFJAVA_PACKAGE@ - /usr/local/@HDFJAVA_PACKAGE@/share -) - -FIND_PATH (HDFJAVA_ROOT_DIR "@HDFJAVA_PACKAGE@@HDF_PACKAGE_EXT@-config.cmake" - HINTS ${_HDFJAVA_HINTS} - PATHS ${_HDFJAVA_PATHS} - PATH_SUFFIXES - cmake/@HDFJAVA_PACKAGE@ - lib/cmake/@HDFJAVA_PACKAGE@ - share/cmake/@HDFJAVA_PACKAGE@ -) - -FIND_PATH (HDFJAVA_LIBRARY "jarhdf5-@HDFJAVA_PACKAGE_VERSION@.jar" - HINTS ${_HDFJAVA_HINTS} - PATHS ${_HDFJAVA_PATHS} - PATH_SUFFIXES - lib -) - -if (HDFJAVA_ROOT_DIR) - set (HDFJAVA_FOUND "YES") - INCLUDE (${HDFJAVA_ROOT_DIR}/@HDFJAVA_PACKAGE@@HDF_PACKAGE_EXT@-config.cmake) - set (HDFJAVA_LIBRARIES "${HDFJAVA_LIBRARY}") - set (HDFJAVA_INCLUDE_DIRS - ${HDFJAVA_LIBRARY}/jarhdf-@HDFJAVA_PACKAGE_VERSION@.jar - ${HDFJAVA_LIBRARY}/jarhdf5-@HDFJAVA_PACKAGE_VERSION@.jar - ) - -endif () diff --git a/config/cmake/FindHDFS.cmake b/config/cmake/FindHDFS.cmake new file mode 100644 index 0000000..e401a94 --- /dev/null +++ b/config/cmake/FindHDFS.cmake @@ -0,0 +1,70 @@ + +# DerivedFrom: https://github.com/cloudera/Impala/blob/cdh5-trunk/cmake_modules/FindHDFS.cmake +# - Find HDFS (hdfs.h and libhdfs.so) +# This module defines +# Hadoop_VERSION, version string of ant if found +# HDFS_INCLUDE_DIR, directory containing hdfs.h +# HDFS_LIBRARIES, location of libhdfs.so +# HDFS_FOUND, whether HDFS is found. + +exec_program($ENV{HADOOP_HOME}/bin/hadoop ARGS version OUTPUT_VARIABLE Hadoop_VERSION + RETURN_VALUE Hadoop_RETURN) + +# currently only looking in HADOOP_HOME +find_path(HDFS_INCLUDE_DIR hdfs.h PATHS + $ENV{HADOOP_HOME}/include/ + # make sure we don't accidentally pick up a different version + NO_DEFAULT_PATH +) + +if ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8") + set(arch_hint "x64") +elseif ("$ENV{LIB}" MATCHES "(amd64|ia64)") + set(arch_hint "x64") +else () + set(arch_hint "x86") +endif() + +message(STATUS "Architecture: ${arch_hint}") + +if ("${arch_hint}" STREQUAL "x64") + set(HDFS_LIB_PATHS $ENV{HADOOP_HOME}/lib/native) +else () + set(HDFS_LIB_PATHS $ENV{HADOOP_HOME}/lib/native) +endif () + +message(STATUS "HDFS_LIB_PATHS: ${HDFS_LIB_PATHS}") + +find_library(HDFS_LIB NAMES hdfs PATHS + ${HDFS_LIB_PATHS} + # make sure we don't accidentally pick up a different version + NO_DEFAULT_PATH +) + +if (HDFS_LIB) + set(HDFS_FOUND TRUE) + set(HDFS_LIBRARIES ${HDFS_LIB}) + set(HDFS_STATIC_LIB ${HDFS_LIB_PATHS}/${CMAKE_STATIC_LIBRARY_PREFIX}hdfs${CMAKE_STATIC_LIBRARY_SUFFIX}) + + add_library(hdfs_static STATIC IMPORTED) + set_target_properties(hdfs_static PROPERTIES IMPORTED_LOCATION ${HDFS_STATIC_LIB}) +else () + set(HDFS_FOUND FALSE) +endif () + +if (HDFS_FOUND) + if (NOT HDFS_FIND_QUIETLY) + message(STATUS "${Hadoop_VERSION}") + message(STATUS "HDFS_INCLUDE_DIR: ${HDFS_INCLUDE_DIR}") + message(STATUS "HDFS_LIBRARIES: ${HDFS_LIBRARIES}") + message(STATUS "hdfs_static: ${HDFS_STATIC_LIB}") + endif () +else () + message(FATAL_ERROR "HDFS includes and libraries NOT found." + "(${HDFS_INCLUDE_DIR}, ${HDFS_LIB})") +endif () + +mark_as_advanced( + HDFS_LIBRARIES + HDFS_INCLUDE_DIR +) diff --git a/config/cmake/FindJNI.cmake b/config/cmake/FindJNI.cmake deleted file mode 100644 index 1e6daf6..0000000 --- a/config/cmake/FindJNI.cmake +++ /dev/null @@ -1,347 +0,0 @@ -# Distributed under the OSI-approved BSD 3-Clause License. See https://cmake.org/licensing for details. - -#.rst: -# FindJNI -# ------- -# -# Find JNI java libraries. -# -# This module finds if Java is installed and determines where the -# include files and libraries are. It also determines what the name of -# the library is. The caller may set variable JAVA_HOME to specify a -# Java installation prefix explicitly. -# -# This module sets the following result variables: -# -# :: -# -# JNI_INCLUDE_DIRS = the include dirs to use -# JNI_LIBRARIES = the libraries to use -# JNI_FOUND = TRUE if JNI headers and libraries were found. -# JAVA_AWT_LIBRARY = the path to the jawt library -# JAVA_JVM_LIBRARY = the path to the jvm library -# JAVA_INCLUDE_PATH = the include path to jni.h -# JAVA_INCLUDE_PATH2 = the include path to jni_md.h -# JAVA_AWT_INCLUDE_PATH = the include path to jawt.h - -# Expand {libarch} occurences to java_libarch subdirectory(-ies) and set ${_var} -macro(java_append_library_directories _var) - # Determine java arch-specific library subdir - # Mostly based on openjdk/jdk/make/common/shared/Platform.gmk as of openjdk - # 1.6.0_18 + icedtea patches. However, it would be much better to base the - # guess on the first part of the GNU config.guess platform triplet. - if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64") - if(CMAKE_LIBRARY_ARCHITECTURE STREQUAL "x86_64-linux-gnux32") - set(_java_libarch "x32" "amd64" "i386") - else() - set(_java_libarch "amd64" "i386") - endif() - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$") - set(_java_libarch "i386") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha") - set(_java_libarch "alpha") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm") - # Subdir is "arm" for both big-endian (arm) and little-endian (armel). - set(_java_libarch "arm" "aarch32") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips") - # mips* machines are bi-endian mostly so processor does not tell - # endianess of the underlying system. - set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb" "mips64" "mips64el" "mipsn32" "mipsn32el") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64le") - set(_java_libarch "ppc64" "ppc64le") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64") - set(_java_libarch "ppc64" "ppc") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)") - set(_java_libarch "ppc" "ppc64") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc") - # Both flavours can run on the same processor - set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)") - set(_java_libarch "parisc" "parisc64") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390") - # s390 binaries can run on s390x machines - set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x") - elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh") - set(_java_libarch "sh") - else() - set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}") - endif() - - # Append default list architectures if CMAKE_SYSTEM_PROCESSOR was empty or - # system is non-Linux (where the code above has not been well tested) - if(NOT _java_libarch OR NOT (CMAKE_SYSTEM_NAME MATCHES "Linux")) - list(APPEND _java_libarch "i386" "amd64" "ppc") - endif() - - # Sometimes ${CMAKE_SYSTEM_PROCESSOR} is added to the list to prefer - # current value to a hardcoded list. Remove possible duplicates. - list(REMOVE_DUPLICATES _java_libarch) - - foreach(_path ${ARGN}) - if(_path MATCHES "{libarch}") - foreach(_libarch ${_java_libarch}) - string(REPLACE "{libarch}" "${_libarch}" _newpath "${_path}") - if(EXISTS ${_newpath}) - list(APPEND ${_var} "${_newpath}") - endif() - endforeach() - else() - if(EXISTS ${_path}) - list(APPEND ${_var} "${_path}") - endif() - endif() - endforeach() -endmacro() - -#include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake) -INCLUDE (CMakeFindJavaCommon) - -# Save CMAKE_FIND_FRAMEWORK -if(DEFINED CMAKE_FIND_FRAMEWORK) - set(_JNI_CMAKE_FIND_FRAMEWORK ${CMAKE_FIND_FRAMEWORK}) -else() - unset(_JNI_CMAKE_FIND_FRAMEWORK) -endif() - -if(_JAVA_HOME_EXPLICIT) - set(CMAKE_FIND_FRAMEWORK NEVER) -endif() - -set(JAVA_AWT_LIBRARY_DIRECTORIES) -if(_JAVA_HOME) - JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES - ${_JAVA_HOME}/jre/lib/{libarch} - ${_JAVA_HOME}/jre/lib - ${_JAVA_HOME}/lib/{libarch} - ${_JAVA_HOME}/lib - ${_JAVA_HOME} - ) -endif() -get_filename_component(java_install_version - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit;CurrentVersion]" NAME) - -list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/lib" - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/lib" - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/lib" - ) -JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES - /usr/java/lib - /usr/java/jre/lib - /usr/lib - /usr/lib64 - /usr/local/lib - /usr/local/lib64 - /usr/lib/jvm/java/lib - /usr/lib64/jvm/java/lib - /usr/lib/java/jre/lib/{libarch} - /usr/lib64/java/jre/lib/{libarch} - /usr/lib/jvm/jre/lib/{libarch} - /usr/local/lib/java/jre/lib/{libarch} - /usr/local/share/java/jre/lib/{libarch} - /usr/lib/j2sdk1.4-sun/jre/lib/{libarch} - /usr/lib/j2sdk1.5-sun/jre/lib/{libarch} - /opt/sun-jdk-1.5.0.04/jre/lib/{libarch} - /usr/lib/jvm/java-6-sun/jre/lib/{libarch} - /usr/lib/jvm/java-1.5.0-sun/jre/lib/{libarch} - /usr/lib/jvm/java-6-sun-1.6.0.00/jre/lib/{libarch} # can this one be removed according to #8821 ? Alex - /usr/lib/jvm/java-6-openjdk/jre/lib/{libarch} - /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/{libarch} # fedora - # Debian specific paths for default JVM - /usr/lib/jvm/default-java/jre/lib/{libarch} - /usr/lib/jvm/default-java/jre/lib - /usr/lib/jvm/default-java/lib - # Arch Linux specific paths for default JVM - /usr/lib/jvm/default/jre/lib/{libarch} - /usr/lib/jvm/default/lib/{libarch} - # Ubuntu specific paths for default JVM - /usr/lib/jvm/java-8-openjdk-{libarch}/jre/lib/{libarch} # Ubuntu 15.10 - /usr/lib/jvm/java-7-openjdk-{libarch}/jre/lib/{libarch} # Ubuntu 15.10 - /usr/lib/jvm/java-6-openjdk-{libarch}/jre/lib/{libarch} # Ubuntu 15.10 - # OpenBSD specific paths for default JVM - /usr/local/jdk-1.7.0/jre/lib/{libarch} - /usr/local/jre-1.7.0/lib/{libarch} - /usr/local/jdk-1.6.0/jre/lib/{libarch} - /usr/local/jre-1.6.0/lib/{libarch} - # SuSE specific paths for default JVM - /usr/lib64/jvm/java/jre/lib/{libarch} - /usr/lib64/jvm/jre/lib/{libarch} - ) - -set(JAVA_JVM_LIBRARY_DIRECTORIES) -foreach(dir ${JAVA_AWT_LIBRARY_DIRECTORIES}) - list(APPEND JAVA_JVM_LIBRARY_DIRECTORIES - "${dir}" - "${dir}/client" - "${dir}/server" - # IBM SDK, Java Technology Edition, specific paths - "${dir}/j9vm" - "${dir}/default" - ) -endforeach() - -set(JAVA_AWT_INCLUDE_DIRECTORIES) -if(_JAVA_HOME) - list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES ${_JAVA_HOME}/include) -endif() -list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/include" - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/include" - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/include" -) - -JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_INCLUDE_DIRECTORIES - ${_JAVA_HOME}/include - /usr/include - /usr/java/include - /usr/local/include - /usr/lib/java/include - /usr/lib64/java/include - /usr/local/lib/java/include - /usr/lib/jvm/java/include - /usr/lib/jvm/java-6-sun/include - /usr/lib/jvm/java-1.5.0-sun/include - /usr/lib/jvm/java-6-sun-1.6.0.00/include # can this one be removed according to #8821 ? Alex - /usr/lib/jvm/java-6-openjdk/include - /usr/lib/jvm/java-7-openjdk/include - /usr/lib64/jvm/java-7-openjdk/include - /usr/lib64/jvm/java-7-openjdk-amd64/include - /usr/lib/jvm/java-8-openjdk-{libarch}/include # ubuntu 15.10 - /usr/lib/jvm/java-7-openjdk-{libarch}/include # ubuntu 15.10 - /usr/lib/jvm/java-6-openjdk-{libarch}/include # ubuntu 15.10 - /usr/local/share/java/include - /usr/lib/j2sdk1.4-sun/include - /usr/lib/j2sdk1.5-sun/include - /opt/sun-jdk-1.5.0.04/include - # Debian specific path for default JVM - /usr/lib/jvm/default-java/include - # Arch specific path for default JVM - /usr/lib/jvm/default/include - # OpenBSD specific path for default JVM - /usr/local/jdk-1.7.0/include - /usr/local/jdk-1.6.0/include - # SuSE specific paths for default JVM - /usr/lib64/jvm/java/include - ) - -foreach(JAVA_PROG "${JAVA_RUNTIME}" "${JAVA_COMPILE}" "${JAVA_ARCHIVE}") - get_filename_component(jpath "${JAVA_PROG}" PATH) - foreach(JAVA_INC_PATH ../include ../java/include ../share/java/include) - if(EXISTS ${jpath}/${JAVA_INC_PATH}) - list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES "${jpath}/${JAVA_INC_PATH}") - endif() - endforeach() - foreach(JAVA_LIB_PATH - ../lib ../jre/lib ../jre/lib/i386 - ../java/lib ../java/jre/lib ../java/jre/lib/i386 - ../share/java/lib ../share/java/jre/lib ../share/java/jre/lib/i386) - if(EXISTS ${jpath}/${JAVA_LIB_PATH}) - list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES "${jpath}/${JAVA_LIB_PATH}") - endif() - endforeach() -endforeach() - -if(APPLE) - if(CMAKE_FIND_FRAMEWORK STREQUAL "ONLY") - set(_JNI_SEARCHES FRAMEWORK) - elseif(CMAKE_FIND_FRAMEWORK STREQUAL "NEVER") - set(_JNI_SEARCHES NORMAL) - elseif(CMAKE_FIND_FRAMEWORK STREQUAL "LAST") - set(_JNI_SEARCHES NORMAL FRAMEWORK) - else() - set(_JNI_SEARCHES FRAMEWORK NORMAL) - endif() - set(_JNI_FRAMEWORK_JVM NAMES JavaVM) - set(_JNI_FRAMEWORK_JAWT "${_JNI_FRAMEWORK_JVM}") -else() - set(_JNI_SEARCHES NORMAL) -endif() - -set(_JNI_NORMAL_JVM - NAMES jvm - PATHS ${JAVA_JVM_LIBRARY_DIRECTORIES} - ) - -set(_JNI_NORMAL_JAWT - NAMES jawt - PATHS ${JAVA_AWT_LIBRARY_DIRECTORIES} - ) - -foreach(search ${_JNI_SEARCHES}) - find_library(JAVA_JVM_LIBRARY ${_JNI_${search}_JVM}) - find_library(JAVA_AWT_LIBRARY ${_JNI_${search}_JAWT}) - if(JAVA_JVM_LIBRARY) - break() - endif() -endforeach() -unset(_JNI_SEARCHES) -unset(_JNI_FRAMEWORK_JVM) -unset(_JNI_FRAMEWORK_JAWT) -unset(_JNI_NORMAL_JVM) -unset(_JNI_NORMAL_JAWT) - -# Find headers matching the library. -if("${JAVA_JVM_LIBRARY};${JAVA_AWT_LIBRARY};" MATCHES "(/JavaVM.framework|-framework JavaVM);") - set(CMAKE_FIND_FRAMEWORK ONLY) -else() - set(CMAKE_FIND_FRAMEWORK NEVER) -endif() - -# add in the include path -find_path(JAVA_INCLUDE_PATH jni.h - ${JAVA_AWT_INCLUDE_DIRECTORIES} -) - -find_path(JAVA_INCLUDE_PATH2 NAMES jni_md.h jniport.h - PATHS - ${JAVA_INCLUDE_PATH} - ${JAVA_INCLUDE_PATH}/darwin - ${JAVA_INCLUDE_PATH}/win32 - ${JAVA_INCLUDE_PATH}/linux - ${JAVA_INCLUDE_PATH}/freebsd - ${JAVA_INCLUDE_PATH}/openbsd - ${JAVA_INCLUDE_PATH}/solaris - ${JAVA_INCLUDE_PATH}/hp-ux - ${JAVA_INCLUDE_PATH}/alpha - ${JAVA_INCLUDE_PATH}/aix -) - -find_path(JAVA_AWT_INCLUDE_PATH jawt.h - ${JAVA_INCLUDE_PATH} -) - -# Restore CMAKE_FIND_FRAMEWORK -if(DEFINED _JNI_CMAKE_FIND_FRAMEWORK) - set(CMAKE_FIND_FRAMEWORK ${_JNI_CMAKE_FIND_FRAMEWORK}) - unset(_JNI_CMAKE_FIND_FRAMEWORK) -else() - unset(CMAKE_FIND_FRAMEWORK) -endif() - -#include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) -INCLUDE (FindPackageHandleStandardArgs) -FIND_PACKAGE_HANDLE_STANDARD_ARGS(JNI DEFAULT_MSG JAVA_AWT_LIBRARY - JAVA_JVM_LIBRARY - JAVA_INCLUDE_PATH - JAVA_INCLUDE_PATH2 - JAVA_AWT_INCLUDE_PATH) - -mark_as_advanced( - JAVA_AWT_LIBRARY - JAVA_JVM_LIBRARY - JAVA_AWT_INCLUDE_PATH - JAVA_INCLUDE_PATH - JAVA_INCLUDE_PATH2 -) - -set(JNI_LIBRARIES - ${JAVA_AWT_LIBRARY} - ${JAVA_JVM_LIBRARY} -) - -set(JNI_INCLUDE_DIRS - ${JAVA_INCLUDE_PATH} - ${JAVA_INCLUDE_PATH2} - ${JAVA_AWT_INCLUDE_PATH} -) - diff --git a/config/cmake/H5cxx_config.h.in b/config/cmake/H5cxx_config.h.in index 82e85c6..d1dd42b 100644 --- a/config/cmake/H5cxx_config.h.in +++ b/config/cmake/H5cxx_config.h.in @@ -12,5 +12,5 @@ /* src/H5cxx_config.h.in Created manually. */ /* Define if offsetof extension is present */ -#cmakedefine HAVE_OFFSETOF ${HAVE_OFFSETOF} +#cmakedefine H5_HAVE_OFFSETOF ${H5_HAVE_OFFSETOF} diff --git a/config/cmake/H5pubconf.h.in b/config/cmake/H5pubconf.h.in index b427254..6edf6b4 100644 --- a/config/cmake/H5pubconf.h.in +++ b/config/cmake/H5pubconf.h.in @@ -30,7 +30,7 @@ #cmakedefine H5_AC_APPLE_UNIVERSAL_BUILD @H5_AC_APPLE_UNIVERSAL_BUILD@ /* Define if C++ compiler recognizes offsetof */ -#cmakedefine H5_CXX_HAVE_OFFSETOF @H5_CXX_HAVE_OFFSETOF@ +#cmakedefine H5_CXX_HAVE_OFFSETOF @CXX_HAVE_OFFSETOF@ /* Define the default plugins path to compile */ #cmakedefine H5_DEFAULT_PLUGINDIR "@H5_DEFAULT_PLUGINDIR@" @@ -53,10 +53,10 @@ #define @H5_FC_FUNC_@ /* Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE */ -#cmakedefine H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE @H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +#define H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE @H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ /* Define if we have Fortran C_LONG_DOUBLE */ -#cmakedefine H5_FORTRAN_HAVE_C_LONG_DOUBLE @H5_FORTRAN_HAVE_C_LONG_DOUBLE@ +#define H5_FORTRAN_HAVE_C_LONG_DOUBLE @H5_FORTRAN_HAVE_C_LONG_DOUBLE@ /* Define if we have Fortran intrinsic C_SIZEOF */ #cmakedefine H5_FORTRAN_HAVE_C_SIZEOF @H5_FORTRAN_HAVE_C_SIZEOF@ @@ -71,10 +71,10 @@ #cmakedefine H5_FORTRAN_SIZEOF_LONG_DOUBLE @H5_FORTRAN_SIZEOF_LONG_DOUBLE@ /* Define Fortran compiler ID */ -#cmakedefine H5_Fortran_COMPILER_ID @H5_Fortran_COMPILER_ID@ +#define H5_Fortran_COMPILER_ID @CMAKE_Fortran_COMPILER_ID@ /* Define valid Fortran INTEGER KINDs */ -#cmakedefine H5_H5CONFIG_F_IKIND @H5_HH5_H5CONFIG_F_NUM_RKIND5CONFIG_F_IKIND@ +#cmakedefine H5_H5CONFIG_F_IKIND @H5_H5CONFIG_F_IKIND@ /* Define number of valid Fortran INTEGER KINDs */ #cmakedefine H5_H5CONFIG_F_NUM_IKIND @H5_H5CONFIG_F_NUM_IKIND@ @@ -104,12 +104,18 @@ /* Define if the compiler understands the __func__ keyword */ #cmakedefine H5_HAVE_C99_FUNC @H5_HAVE_C99_FUNC@ +/* Define to 1 if you have the <arpa/inet.h> header file. */ +#cmakedefine H5_HAVE_ARPA_INET_H @H5_HAVE_ARPA_INET_H@ + /* Define to 1 if you have the `clock_gettime' function. */ #cmakedefine H5_HAVE_CLOCK_GETTIME @H5_HAVE_CLOCK_GETTIME@ /* Define if the function stack tracing code is to be compiled in */ #cmakedefine H5_HAVE_CODESTACK @H5_HAVE_CODESTACK@ +/* Define to 1 if you have the <curl/curl.h> header file. */ +#cmakedefine H5_HAVE_CURL_H @H5_HAVE_CURL_H@ + /* Define if Darwin or Mac OS X */ #cmakedefine H5_HAVE_DARWIN @H5_HAVE_DARWIN@ @@ -161,24 +167,12 @@ /* Define to 1 if you have the `fseeko' function. */ #cmakedefine H5_HAVE_FSEEKO @H5_HAVE_FSEEKO@ -/* Define to 1 if you have the `fseeko64' function. */ -#cmakedefine H5_HAVE_FSEEKO64 @H5_HAVE_FSEEKO64@ - -/* Define to 1 if you have the `fstat64' function. */ -#cmakedefine H5_HAVE_FSTAT64 @H5_HAVE_FSTAT64@ - -/* Define to 1 if you have the `ftello' function. */ -#cmakedefine H5_HAVE_FTELLO @H5_HAVE_FTELLO@ - -/* Define to 1 if you have the `ftello64' function. */ -#cmakedefine H5_HAVE_FTELLO64 @H5_HAVE_FTELLO64@ - -/* Define to 1 if you have the `ftruncate64' function. */ -#cmakedefine H5_HAVE_FTRUNCATE64 @H5_HAVE_FTRUNCATE64@ - /* Define if the compiler understands the __FUNCTION__ keyword */ #cmakedefine H5_HAVE_FUNCTION @H5_HAVE_FUNCTION@ +/* Determine if INTEGER*16 is available */ +#cmakedefine H5_HAVE_Fortran_INTEGER_SIZEOF_16 @H5_HAVE_Fortran_INTEGER_SIZEOF_16@ + /* Define to 1 if you have the `GetConsoleScreenBufferInfo' function. */ #cmakedefine H5_HAVE_GETCONSOLESCREENBUFFERINFO @H5_HAVE_GETCONSOLESCREENBUFFERINFO@ @@ -197,6 +191,9 @@ /* Define to 1 if you have the `gettimeofday' function. */ #cmakedefine H5_HAVE_GETTIMEOFDAY @H5_HAVE_GETTIMEOFDAY@ +/* Define to 1 if you have the <hdfs.h> header file. */ +#cmakedefine H5_HAVE_HDFS_H @H5_HAVE_HDFS_H@ + /* Define if the compiler understands inline */ #cmakedefine H5_HAVE_INLINE @H5_HAVE_INLINE@ @@ -213,12 +210,24 @@ /* Define to 1 if you have the <io.h> header file. */ #cmakedefine H5_HAVE_IO_H @H5_HAVE_IO_H@ +/* Define to 1 if you have the `crypto' library (-lcrypto). */ +#cmakedefine H5_HAVE_LIBCRYPTO @H5_HAVE_LIBCRYPTO@ + +/* Define to 1 if you have the `curl' library (-lcurl). */ +#cmakedefine H5_HAVE_LIBCURL @H5_HAVE_LIBCURL@ + /* Define to 1 if you have the `dl' library (-ldl). */ #cmakedefine H5_HAVE_LIBDL @H5_HAVE_LIBDL@ /* Define to 1 if you have the `dmalloc' library (-ldmalloc). */ #cmakedefine H5_HAVE_LIBDMALLOC @H5_HAVE_LIBDMALLOC@ +/* Proceed to build with libhdfs */ +#cmakedefine H5_HAVE_LIBHDFS @H5_HAVE_LIBHDFS@ + +/* Define to 1 if you have the `jvm' library (-ljvm). */ +#cmakedefine H5_HAVE_LIBJVM @H5_HAVE_LIBJVM@ + /* Define to 1 if you have the `m' library (-lm). */ #cmakedefine H5_HAVE_LIBM @H5_HAVE_LIBM@ @@ -258,24 +267,51 @@ /* Define to 1 if you have the `lstat' function. */ #cmakedefine H5_HAVE_LSTAT @H5_HAVE_LSTAT@ +/* Define to 1 if you have the <mach/mach_time.h> header file. */ +#cmakedefine H5_HAVE_MACH_MACH_TIME_H @H5_HAVE_MACH_MACH_TIME_H@ + +/* Define if the map API (H5M) should be compiled */ +#cmakedefine H5_HAVE_MAP_API @H5_HAVE_MAP_API@ + /* Define to 1 if you have the <memory.h> header file. */ #cmakedefine H5_HAVE_MEMORY_H @H5_HAVE_MEMORY_H@ +/* Define if we can build the Mirror VFD */ +#cmakedefine H5_HAVE_MIRROR_VFD @H5_HAVE_MIRROR_VFD@ + /* Define if we have MPE support */ #cmakedefine H5_HAVE_MPE @H5_HAVE_MPE@ /* Define to 1 if you have the <mpe.h> header file. */ #cmakedefine H5_HAVE_MPE_H @H5_HAVE_MPE_H@ -/* Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists */ +/* Define if MPI_Comm_c2f and MPI_Comm_f2c exists */ #cmakedefine H5_HAVE_MPI_MULTI_LANG_Comm @H5_HAVE_MPI_MULTI_LANG_Comm@ -/* Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists */ +/* Define if MPI_Info_c2f and MPI_Info_f2c exists */ #cmakedefine H5_HAVE_MPI_MULTI_LANG_Info @H5_HAVE_MPI_MULTI_LANG_Info@ +/* Define to 1 if you have the <netdb.h> header file. */ +#cmakedefine H5_HAVE_NETDB_H @H5_HAVE_NETDB_H@ + +/* Define to 1 if you have the <netinet/in.h> header file. */ +#cmakedefine H5_HAVE_NETINET_IN_H @H5_HAVE_NETINET_IN_H@ + +/* Define to 1 if you have the <openssl/evp.h> header file. */ +#cmakedefine H5_HAVE_OPENSSL_EVP_H @H5_HAVE_OPENSSL_EVP_H@ + +/* Define to 1 if you have the <openssl/hmac.h> header file. */ +#cmakedefine H5_HAVE_OPENSSL_HMAC_H @H5_HAVE_OPENSSL_HMAC_H@ + +/* Define to 1 if you have the <openssl/sha.h> header file. */ +#cmakedefine H5_HAVE_OPENSSL_SHA_H @H5_HAVE_OPENSSL_SHA_H@ + /* Define if we have parallel support */ #cmakedefine H5_HAVE_PARALLEL @H5_HAVE_PARALLEL@ +/* Define if both pread and pwrite exist. */ +#cmakedefine H5_HAVE_PREADWRITE @H5_HAVE_PREADWRITE@ + /* Define to 1 if you have the <pthread.h> header file. */ #cmakedefine H5_HAVE_PTHREAD_H @H5_HAVE_PTHREAD_H@ @@ -288,6 +324,10 @@ /* Define to 1 if you have the `rand_r' function. */ #cmakedefine H5_HAVE_RAND_R @H5_HAVE_RAND_R@ +/* Define whether the Read-Only S3 virtual file driver (VFD) should be + compiled */ +#cmakedefine H5_HAVE_ROS3_VFD @H5_HAVE_ROS3_VFD@ + /* Define to 1 if you have the `round' function. */ #cmakedefine H5_HAVE_ROUND @H5_HAVE_ROUND@ @@ -345,22 +385,22 @@ /* Define to 1 if you have the `strdup' function. */ #cmakedefine H5_HAVE_STRDUP @H5_HAVE_STRDUP@ -/* Define to 1 if you have the `strtoll' function. */ -#cmakedefine H5_HAVE_STRTOLL @H5_HAVE_STRTOLL@ - -/* Define to 1 if you have the `strtoull' function. */ -#cmakedefine H5_HAVE_STRTOULL @H5_HAVE_STRTOULL@ - /* Define to 1 if you have the <strings.h> header file. */ #cmakedefine H5_HAVE_STRINGS_H @H5_HAVE_STRINGS_H@ /* Define to 1 if you have the <string.h> header file. */ #cmakedefine H5_HAVE_STRING_H @H5_HAVE_STRING_H@ -/* Define if `struct text_info' is defined */ +/* Define to 1 if you have the `strtoll' function. */ +#cmakedefine H5_HAVE_STRTOLL @H5_HAVE_STRTOLL@ + +/* Define to 1 if you have the `strtoull' function. */ +#cmakedefine H5_HAVE_STRTOULL @H5_HAVE_STRTOULL@ + +/* Define if struct text_info is defined */ #cmakedefine H5_HAVE_STRUCT_TEXT_INFO @H5_HAVE_STRUCT_TEXT_INFO@ -/* Define if `struct videoconfig' is defined */ +/* Define if struct videoconfig is defined */ #cmakedefine H5_HAVE_STRUCT_VIDEOCONFIG @H5_HAVE_STRUCT_VIDEOCONFIG@ /* Define to 1 if you have the `symlink' function. */ @@ -396,10 +436,15 @@ /* Define to 1 if you have the <szlib.h> header file. */ #cmakedefine H5_HAVE_SZLIB_H @H5_HAVE_SZLIB_H@ +#if defined(_WIN32) && !defined(H5_BUILT_AS_DYNAMIC_LIB) +/* Not supported on WIN32 platforms with static linking */ +/* #undef H5_HAVE_THREADSAFE */ +#else /* Define if we have thread safe support */ -#cmakedefine H5_HAVE_THREADSAFE @H5_HAVE_THREADSAFE@ +# cmakedefine H5_HAVE_THREADSAFE @H5_HAVE_THREADSAFE@ +#endif -/* Define if `timezone' is a global variable */ +/* Define if timezone is a global variable */ #cmakedefine H5_HAVE_TIMEZONE @H5_HAVE_TIMEZONE@ /* Define if the ioctl TIOCGETD is defined */ @@ -411,7 +456,7 @@ /* Define to 1 if you have the `tmpfile' function. */ #cmakedefine H5_HAVE_TMPFILE @H5_HAVE_TMPFILE@ -/* Define if `tm_gmtoff' is a member of `struct tm' */ +/* Define if tm_gmtoff is a member of struct tm */ #cmakedefine H5_HAVE_TM_GMTOFF @H5_HAVE_TM_GMTOFF@ /* Define to 1 if you have the <unistd.h> header file. */ @@ -432,7 +477,7 @@ /* Define if your system has window style path name. */ #cmakedefine H5_HAVE_WINDOW_PATH @H5_HAVE_WINDOW_PATH@ -/* Define to 1 if you have the <winsock.h> header file. */ +/* Define to 1 if you have the <winsock2.h> header file. */ #cmakedefine H5_HAVE_WINSOCK2_H @H5_HAVE_WINSOCK2_H@ /* Define to 1 if you have the <zlib.h> header file. */ @@ -450,7 +495,7 @@ /* Define if the compiler understands __inline__ */ #cmakedefine H5_HAVE___INLINE__ @H5_HAVE___INLINE__@ -/* Define if HDF5's high-level library headers should be included in hdf5.h */ +/* Define if the high-level library headers should be included in hdf5.h */ #cmakedefine H5_INCLUDE_HL @H5_INCLUDE_HL@ /* Define if your system can convert long double to (unsigned) long long @@ -469,15 +514,15 @@ with special algorithm. */ #cmakedefine H5_LONG_TO_LDOUBLE_SPECIAL @H5_LONG_TO_LDOUBLE_SPECIAL@ +/* Define if your system is power6 and cannot convert some long double values. */ +#cmakedefine H5_DISABLE_SOME_LDOUBLE_CONV @H5_DISABLE_SOME_LDOUBLE_CONV@ + /* Define to the sub-directory where libtool stores uninstalled libraries. */ #cmakedefine H5_LT_OBJDIR @H5_LT_OBJDIR@ /* Define to enable internal memory allocation sanity checking. */ /* #cmakedefine H5_MEMORY_ALLOC_SANITY_CHECK @H5_MEMORY_ALLOC_SANITY_CHECK@ ** Define in CMakeLists.txt */ -/* Define if the metadata trace file code is to be compiled in */ -#cmakedefine H5_METADATA_TRACE_FILE @H5_METADATA_TRACE_FILE@ - /* Define if we can violate pointer alignment restrictions */ #cmakedefine H5_NO_ALIGNMENT_RESTRICTIONS @H5_NO_ALIGNMENT_RESTRICTIONS@ @@ -506,7 +551,7 @@ #define H5_PACKAGE_VERSION "@HDF5_PACKAGE_VERSION_STRING@" /* Determine the maximum decimal precision in C */ -#define H5_PAC_C_MAX_REAL_PRECISION @H5_PAC_C_MAX_REAL_PRECISION@ +#cmakedefine H5_PAC_C_MAX_REAL_PRECISION @H5_PAC_C_MAX_REAL_PRECISION@ /* Define Fortran Maximum Real Decimal Precision */ #cmakedefine H5_PAC_FC_MAX_REAL_PRECISION @H5_PAC_FC_MAX_REAL_PRECISION@ @@ -611,6 +656,9 @@ /* The size of `short', as computed by sizeof. */ #cmakedefine H5_SIZEOF_SHORT @H5_SIZEOF_SHORT@ +/* The size of `time_t', as computed by sizeof. */ +#cmakedefine H5_SIZEOF_TIME_T @H5_SIZEOF_TIME_T@ + /* The size of `uint16_t', as computed by sizeof. */ #cmakedefine H5_SIZEOF_UINT16_T @H5_SIZEOF_UINT16_T@ @@ -678,6 +726,15 @@ /* Define using v1.8 public API symbols by default */ #cmakedefine H5_USE_18_API_DEFAULT @H5_USE_18_API_DEFAULT@ +/* Define using v1.10 public API symbols by default */ +#cmakedefine H5_USE_110_API_DEFAULT @H5_USE_110_API_DEFAULT@ + +/* Define using v1.12 public API symbols by default */ +#cmakedefine H5_USE_112_API_DEFAULT @H5_USE_112_API_DEFAULT@ + +/* Define using v1.14 public API symbols by default */ +#cmakedefine H5_USE_114_API_DEFAULT @H5_USE_114_API_DEFAULT@ + /* Define if a memory checking tool will be used on the library, to cause library to be very picky about memory operations and also disable the internal free list manager code. */ diff --git a/config/cmake/HDF518_Examples.cmake.in b/config/cmake/HDF518_Examples.cmake.in deleted file mode 100644 index 6af0b09..0000000 --- a/config/cmake/HDF518_Examples.cmake.in +++ /dev/null @@ -1,106 +0,0 @@ -# -# Copyright by The HDF Group. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -# -cmake_minimum_required(VERSION 3.2.2 FATAL_ERROR) -############################################################################################################### -# This script will build and run the examples from a folder -# Execute from a command line: -# ctest -S HDF518_Examples.cmake,OPTION=VALUE -C Release -VV -O test.log -############################################################################################################### - -set(CTEST_CMAKE_GENERATOR "@CMAKE_GENERATOR@") -if("@CMAKE_GENERATOR_TOOLSET@") - set(CMAKE_GENERATOR_TOOLSET "@CMAKE_GENERATOR_TOOLSET@") -endif() -set(CTEST_DASHBOARD_ROOT ${CTEST_SCRIPT_DIRECTORY}) - -# handle input parameters to script. -#INSTALLDIR - HDF5-1.8 root folder -#CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo -#CTEST_SOURCE_NAME - name of source folder; HDF5Examples -if(DEFINED CTEST_SCRIPT_ARG) - # transform ctest script arguments of the form - # script.ctest,var1=value1,var2=value2 - # to variables with the respective names set to the respective values - string(REPLACE "," ";" script_args "${CTEST_SCRIPT_ARG}") - foreach(current_var ${script_args}) - if("${current_var}" MATCHES "^([^=]+)=(.+)$") - set("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}") - endif() - endforeach() -endif() - -################################################################### -### Following Line is one of [Release, RelWithDebInfo, Debug] ##### -set(CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}") -if(NOT DEFINED CTEST_CONFIGURATION_TYPE) - set(CTEST_CONFIGURATION_TYPE "Release") -endif() -set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCTEST_CONFIGURATION_TYPE:STRING=${CTEST_CONFIGURATION_TYPE}") -################################################################## - -if(NOT DEFINED INSTALLDIR) - set(INSTALLDIR "@CMAKE_INSTALL_PREFIX@") -endif() - -if(NOT DEFINED CTEST_SOURCE_NAME) - set(CTEST_SOURCE_NAME "HDF5Examples") -endif() - -if(NOT DEFINED HDF_LOCAL) - set(CDASH_LOCAL "NO") -else() - set(CDASH_LOCAL "YES") -endif() -if(NOT DEFINED CTEST_SITE) - set(CTEST_SITE "local") -endif() -if(NOT DEFINED CTEST_BUILD_NAME) - set(CTEST_BUILD_NAME "examples") -endif() -set(BUILD_OPTIONS "${BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDNAME:STRING=${CTEST_BUILD_NAME}") - -#TAR_SOURCE - name of tarfile -#if(NOT DEFINED TAR_SOURCE) -# set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.2.1-Source") -#endif() - -############################################################################################################### -if(WIN32) - set(SITE_OS_NAME "Windows") - set(ENV{HDF5_DIR} "${INSTALLDIR}/cmake") - set(CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}\\build) - set(CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_SOURCE_NAME}") - set(CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_BINARY_NAME}") -else() - set(ENV{HDF5_DIR} "${INSTALLDIR}/share/cmake") - set(ENV{LD_LIBRARY_PATH} "${INSTALLDIR}/lib") - set(CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}/build) - set(CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_SOURCE_NAME}") - set(CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_BINARY_NAME}") -endif() -if(${CDASH_LOCAL}) - set(BUILD_OPTIONS "${BUILD_OPTIONS} -DCDASH_LOCAL:BOOL=ON") -endif() -set(BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF5_PACKAGE_NAME:STRING=@HDF5_PACKAGE@@HDF_PACKAGE_EXT@") - -############################################################################################################### -# For any comments please contact cdashhelp@hdfgroup.org -# -############################################################################################################### - -if(WIN32) - include(${CTEST_SCRIPT_DIRECTORY}\\HDF5_Examples_options.cmake) - include(${CTEST_SCRIPT_DIRECTORY}\\CTestScript.cmake) -else() - include(${CTEST_SCRIPT_DIRECTORY}/HDF5_Examples_options.cmake) - include(${CTEST_SCRIPT_DIRECTORY}/CTestScript.cmake) -endif() diff --git a/config/cmake/HDF5Macros.cmake b/config/cmake/HDF5Macros.cmake index f08349e..007bc29 100644 --- a/config/cmake/HDF5Macros.cmake +++ b/config/cmake/HDF5Macros.cmake @@ -10,25 +10,28 @@ # help@hdfgroup.org. # #------------------------------------------------------------------------------- -macro (H5_SET_LIB_OPTIONS libtarget libname libtype) +macro (H5_SET_LIB_OPTIONS libtarget libname libtype libpackage) set (LIB_OUT_NAME "${libname}") # SOVERSION passed in ARGN when shared if (${libtype} MATCHES "SHARED") - if (ARGN) - set (PACKAGE_SOVERSION ${ARGN}) - else () - set (PACKAGE_SOVERSION ${HDF5_PACKAGE_SOVERSION}) - endif () + set (PACKAGE_SOVERSION ${HDF5_${libpackage}_PACKAGE_SOVERSION}) + set (PACKAGE_COMPATIBILITY ${H5_${libpackage}_SOVERS_INTERFACE}.0.0) + set (PACKAGE_CURRENT ${H5_${libpackage}_SOVERS_INTERFACE}.${H5_${libpackage}_SOVERS_MINOR}.0) if (WIN32) set (LIBHDF_VERSION ${HDF5_PACKAGE_VERSION_MAJOR}) else () - set (LIBHDF_VERSION ${HDF5_PACKAGE_VERSION}) + set (LIBHDF_VERSION ${HDF5_${libpackage}_PACKAGE_SOVERSION_MAJOR}) endif () - set_target_properties (${libtarget} PROPERTIES VERSION ${LIBHDF_VERSION}) + set_target_properties (${libtarget} PROPERTIES VERSION ${PACKAGE_SOVERSION}) if (WIN32) - set (${LIB_OUT_NAME} "${LIB_OUT_NAME}-${PACKAGE_SOVERSION}") + set (${LIB_OUT_NAME} "${LIB_OUT_NAME}-${LIBHDF_VERSION}") else () - set_target_properties (${libtarget} PROPERTIES SOVERSION ${PACKAGE_SOVERSION}) + set_target_properties (${libtarget} PROPERTIES SOVERSION ${LIBHDF_VERSION}) + endif () + if (CMAKE_C_OSX_CURRENT_VERSION_FLAG) + set_property(TARGET ${libtarget} APPEND PROPERTY + LINK_FLAGS "${CMAKE_C_OSX_CURRENT_VERSION_FLAG}${PACKAGE_CURRENT} ${CMAKE_C_OSX_COMPATIBILITY_VERSION_FLAG}${PACKAGE_COMPATIBILITY}" + ) endif () endif () HDF_SET_LIB_OPTIONS (${libtarget} ${LIB_OUT_NAME} ${libtype}) @@ -38,7 +41,6 @@ macro (H5_SET_LIB_OPTIONS libtarget libname libtype) option (HDF5_BUILD_WITH_INSTALL_NAME "Build with library install_name set to the installation path" OFF) if (HDF5_BUILD_WITH_INSTALL_NAME) set_target_properties (${libtarget} PROPERTIES - LINK_FLAGS "-current_version ${HDF5_PACKAGE_VERSION} -compatibility_version ${HDF5_PACKAGE_VERSION}" INSTALL_NAME_DIR "${CMAKE_INSTALL_PREFIX}/lib" BUILD_WITH_INSTALL_RPATH ${HDF5_BUILD_WITH_INSTALL_NAME} ) diff --git a/config/cmake/HDF5UseFortran.cmake b/config/cmake/HDF5UseFortran.cmake index 3152aaa..c5d8200 100644 --- a/config/cmake/HDF5UseFortran.cmake +++ b/config/cmake/HDF5UseFortran.cmake @@ -10,116 +10,106 @@ # help@hdfgroup.org. # -## Check for non-standard extenstion quadmath.h - -CHECK_INCLUDE_FILES(quadmath.h C_HAVE_QUADMATH) - -if (${C_HAVE_QUADMATH}) - set(HAVE_QUADMATH 1) -else () - set(HAVE_QUADMATH 0) -endif () - # # This file provides functions for HDF5 specific Fortran support. # #------------------------------------------------------------------------------- -ENABLE_LANGUAGE (Fortran) +enable_language (Fortran) +set (HDF_PREFIX "H5") +include (CheckFortranFunctionExists) + +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + include (CheckFortranSourceRuns) + include (CheckFortranSourceCompiles) +endif () + +# Read source line beginning at the line matching Input:"START" and ending at the line matching Input:"END" +macro (READ_SOURCE SOURCE_START SOURCE_END RETURN_VAR) + file (READ "${HDF5_SOURCE_DIR}/m4/aclocal_fc.f90" SOURCE_MASTER) + string (REGEX MATCH "${SOURCE_START}[\\\t\\\n\\\r[].+]*${SOURCE_END}" SOURCE_CODE ${SOURCE_MASTER}) + set (RETURN_VAR "${SOURCE_CODE}") +endmacro () + +set (RUN_OUTPUT_PATH_DEFAULT ${CMAKE_BINARY_DIR}) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + if (HDF5_REQUIRED_LIBRARIES) + set (CMAKE_REQUIRED_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}") + endif () +else () # The provided CMake Fortran macros don't provide a general compile/run function # so this one is used. #----------------------------------------------------------------------------- -macro (FORTRAN_RUN FUNCTION CODE RUN_RESULT_VAR1 COMPILE_RESULT_VAR RETURN) -# -# if (NOT DEFINED ${RUN_RESULT_VAR}) - message (STATUS "Detecting Fortran ${FUNCTION}") - if (CMAKE_REQUIRED_LIBRARIES) - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") - else () - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) - endif () +macro (FORTRAN_RUN FUNCTION_NAME SOURCE_CODE RUN_RESULT_VAR1 COMPILE_RESULT_VAR1 RETURN_VAR) + message (STATUS "Detecting Fortran ${FUNCTION_NAME}") file (WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler1.f90 - "${CODE}" + "${SOURCE_CODE}" ) TRY_RUN (RUN_RESULT_VAR COMPILE_RESULT_VAR ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler1.f90 - CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" - RUN_OUTPUT_VARIABLE OUTPUT + LINK_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}" ) - set(${RETURN} ${OUTPUT}) - - #message ( "Test result1 ${RETURN} ") - #message ( "Test result3 ${RESULT} ") - #message ( "Test result2 ${CMAKE_MATCH_0} ") - #message ( "Test result4 ${CMAKE_MATCH_1} ") - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test result2 ${COMPILE_RESULT_VAR} ") - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test result1 ${RUN_RESULT_VAR} ") - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - if (${COMPILE_RESULT_VAR}) + set(${RETURN_VAR} ${RUN_RESULT_VAR}) if (${RUN_RESULT_VAR} MATCHES 0) - message (STATUS "Testing Fortran ${FUNCTION} - OK") + message (STATUS "Testing Fortran ${FUNCTION_NAME} - OK") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log - "Determining if the Fortran ${FUNCTION} exists passed with the following output:\n" - "${OUTPUT}\n\n" + "Determining if the Fortran ${FUNCTION_NAME} exists passed\n" ) else () - message (STATUS "Testing Fortran ${FUNCTION} - Fail") + message (STATUS "Testing Fortran ${FUNCTION_NAME} - Fail") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Determining if the Fortran ${FUNCTION} exists failed with the following output:\n" - "${OUTPUT}\n\n") + "Determining if the Fortran ${FUNCTION_NAME} exists failed: ${RUN_RESULT_VAR}\n" + ) endif () + else () + message (STATUS "Compiling Fortran ${FUNCTION_NAME} - Fail") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + "Determining if the Fortran ${FUNCTION_NAME} compiles failed: ${COMPILE_RESULT_VAR}\n" + ) + set(${RETURN_VAR} ${COMPILE_RESULT_VAR}) endif () -# endif () endmacro () - -# Read source line beginning at the line matching Input:"START" and ending at the line matching Input:"END" -macro (READ_SOURCE START END RETURN) - file (READ "${HDF5_SOURCE_DIR}/m4/aclocal_fc.f90" CODE) - string (REGEX MATCH "${START}[\\\t\\\n\\\r[].+]*${END}" CODE ${CODE}) - set (RETURN "${CODE}") -endmacro () - +endif () #----------------------------------------------------------------------------- # Check to see C_LONG_DOUBLE is available -READ_SOURCE("PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" "END PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" CODE) -CHECK_FORTRAN_FEATURE(c_long_double - "${CODE}" - FORTRAN_HAVE_C_LONG_DOUBLE -) +READ_SOURCE("PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" "END PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" SOURCE_CODE) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_compiles (${SOURCE_CODE} FORTRAN_HAVE_C_LONG_DOUBLE SRC_EXT f90) +else () + CHECK_FORTRAN_FEATURE(c_long_double "${SOURCE_CODE}" FORTRAN_HAVE_C_LONG_DOUBLE) +endif () if (${FORTRAN_HAVE_C_LONG_DOUBLE}) - set (FORTRAN_HAVE_C_LONG_DOUBLE 1) + set (${HDF_PREFIX}_FORTRAN_HAVE_C_LONG_DOUBLE 1) else () - set (FORTRAN_HAVE_C_LONG_DOUBLE 0) + set (${HDF_PREFIX}_FORTRAN_HAVE_C_LONG_DOUBLE 0) endif () # Check to see C_LONG_DOUBLE is different from C_DOUBLE -READ_SOURCE("MODULE type_mod" "END PROGRAM PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE" CODE) -CHECK_FORTRAN_FEATURE(c_long_double - "${CODE}" - FORTRAN_C_LONG_DOUBLE_IS_UNIQUE -) +READ_SOURCE("MODULE type_mod" "END PROGRAM PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE" SOURCE_CODE) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_compiles (${SOURCE_CODE} FORTRAN_C_LONG_DOUBLE_IS_UNIQUE SRC_EXT f90) +else () + CHECK_FORTRAN_FEATURE(c_long_double "${SOURCE_CODE}" FORTRAN_C_LONG_DOUBLE_IS_UNIQUE) +endif () if (${FORTRAN_C_LONG_DOUBLE_IS_UNIQUE}) - set (FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 1) + set (${HDF_PREFIX}_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 1) else () - set (FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 0) + set (${HDF_PREFIX}_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 0) endif () ## Set the sizeof function for use later in the fortran tests -if (FORTRAN_HAVE_STORAGE_SIZE) +if (${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE) set (FC_SIZEOF_A "STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)") set (FC_SIZEOF_B "STORAGE_SIZE(b, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)") set (FC_SIZEOF_C "STORAGE_SIZE(c, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)") -elseif (FORTRAN_HAVE_C_SIZEOF) +elseif (${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF) set (FC_SIZEOF_A "SIZEOF(a)") set (FC_SIZEOF_B "SIZEOF(b)") set (FC_SIZEOF_C "SIZEOF(c)") @@ -131,13 +121,80 @@ endif () # Determine the available KINDs for REALs and INTEGERs #----------------------------------------------------------------------------- -READ_SOURCE ("PROGRAM FC_AVAIL_KINDS" "END PROGRAM FC_AVAIL_KINDS" CODE) +#READ_SOURCE ("PROGRAM FC_AVAIL_KINDS" "END PROGRAM FC_AVAIL_KINDS" SOURCE_CODE) +set (PROG_SRC_CODE + " + PROGRAM FC_AVAIL_KINDS + IMPLICIT NONE + INTEGER :: ik, jk, k, max_decimal_prec + INTEGER :: num_rkinds = 1, num_ikinds = 1 + INTEGER, DIMENSION(1:10) :: list_ikinds = -1 + INTEGER, DIMENSION(1:10) :: list_rkinds = -1 + + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + + ! Find integer KINDs + list_ikinds(num_ikinds)=SELECTED_INT_KIND(1) + DO ik = 2, 36 + k = SELECTED_INT_KIND(ik) + IF(k.LT.0) EXIT + IF(k.GT.list_ikinds(num_ikinds))THEN + num_ikinds = num_ikinds + 1 + list_ikinds(num_ikinds) = k + ENDIF + ENDDO + + DO k = 1, num_ikinds + WRITE(8,'(I0)', ADVANCE='NO') list_ikinds(k) + IF(k.NE.num_ikinds)THEN + WRITE(8,'(A)',ADVANCE='NO') ',' + ELSE + WRITE(8,'()') + ENDIF + ENDDO + + ! Find real KINDs + list_rkinds(num_rkinds)=SELECTED_REAL_KIND(1) + max_decimal_prec = 1 + + prec: DO ik = 2, 36 + exp: DO jk = 1, 17000 + k = SELECTED_REAL_KIND(ik,jk) + IF(k.LT.0) EXIT exp + IF(k.GT.list_rkinds(num_rkinds))THEN + num_rkinds = num_rkinds + 1 + list_rkinds(num_rkinds) = k + ENDIF + max_decimal_prec = ik + ENDDO exp + ENDDO prec + + DO k = 1, num_rkinds + WRITE(8,'(I0)', ADVANCE='NO') list_rkinds(k) + IF(k.NE.num_rkinds)THEN + WRITE(8,'(A)',ADVANCE='NO') ',' + ELSE + WRITE(8,'()') + ENDIF + ENDDO + + WRITE(8,'(I0)') max_decimal_prec + WRITE(8,'(I0)') num_ikinds + WRITE(8,'(I0)') num_rkinds + END PROGRAM FC_AVAIL_KINDS + " +) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC_CODE} FC_AVAIL_KINDS_RESULT SRC_EXT f90) +else () FORTRAN_RUN ("REAL and INTEGER KINDs" - "${CODE}" - XX - YY - PROG_OUTPUT + "${PROG_SRC_CODE}" + XX + YY + FC_AVAIL_KINDS_RESULT ) +endif () + # dnl The output from the above program will be: # dnl -- LINE 1 -- valid integer kinds (comma seperated list) # dnl -- LINE 2 -- valid real kinds (comma seperated list) @@ -145,13 +202,13 @@ FORTRAN_RUN ("REAL and INTEGER KINDs" # dnl -- LINE 4 -- number of valid integer kinds # dnl -- LINE 5 -- number of valid real kinds -file (READ "${CMAKE_BINARY_DIR}/pac_fconftest.out" PROG_OUTPUT) +file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_fconftest.out" PROG_OUTPUT) # Convert the string to a list of strings by replacing the carriage return with a semicolon string (REGEX REPLACE "\n" ";" PROG_OUTPUT "${PROG_OUTPUT}") list (GET PROG_OUTPUT 0 pac_validIntKinds) list (GET PROG_OUTPUT 1 pac_validRealKinds) -list (GET PROG_OUTPUT 2 H5_PAC_FC_MAX_REAL_PRECISION) +list (GET PROG_OUTPUT 2 ${HDF_PREFIX}_PAC_FC_MAX_REAL_PRECISION) # If the lists are empty then something went wrong. if (NOT pac_validIntKinds) @@ -160,7 +217,7 @@ endif () if (NOT pac_validRealKinds) message (FATAL_ERROR "Failed to find available REAL KINDs for Fortran") endif () -if (NOT H5_PAC_FC_MAX_REAL_PRECISION) +if (NOT ${HDF_PREFIX}_PAC_FC_MAX_REAL_PRECISION) message (FATAL_ERROR "No output from Fortran decimal precision program") endif () @@ -172,13 +229,13 @@ list (GET PROG_OUTPUT 4 NUM_RKIND) set (PAC_FORTRAN_NUM_INTEGER_KINDS "${NUM_IKIND}") -set (H5CONFIG_F_NUM_IKIND "INTEGER, PARAMETER :: num_ikinds = ${NUM_IKIND}") -set (H5CONFIG_F_IKIND "INTEGER, DIMENSION(1:num_ikinds) :: ikind = (/${pac_validIntKinds}/)") +set (${HDF_PREFIX}_H5CONFIG_F_NUM_IKIND "INTEGER, PARAMETER :: num_ikinds = ${NUM_IKIND}") +set (${HDF_PREFIX}_H5CONFIG_F_IKIND "INTEGER, DIMENSION(1:num_ikinds) :: ikind = (/${pac_validIntKinds}/)") message (STATUS "....NUMBER OF INTEGER KINDS FOUND ${PAC_FORTRAN_NUM_INTEGER_KINDS}") message (STATUS "....REAL KINDS FOUND ${PAC_FC_ALL_REAL_KINDS}") -message (STATUS "....INTEGER KINDS FOUND ${PAC_FC_ALL_REAL_KINDS}") -message (STATUS "....MAX DECIMAL PRECISION ${H5_PAC_FC_MAX_REAL_PRECISION}") +message (STATUS "....INTEGER KINDS FOUND ${PAC_FC_ALL_INTEGER_KINDS}") +message (STATUS "....MAX DECIMAL PRECISION ${${HDF_PREFIX}_PAC_FC_MAX_REAL_PRECISION}") #----------------------------------------------------------------------------- # Determine the available KINDs for REALs and INTEGERs @@ -188,22 +245,25 @@ message (STATUS "....MAX DECIMAL PRECISION ${H5_PAC_FC_MAX_REAL_PRECISION}") # ********** string (REGEX REPLACE "," ";" VAR "${pac_validIntKinds}") -foreach (KIND ${VAR} ) - set (PROG_SRC - " - PROGRAM main - USE ISO_C_BINDING - IMPLICIT NONE - INTEGER (KIND=${KIND}) a - WRITE(*,'(I0)') ${FC_SIZEOF_A} - END - " - ) - FORTRAN_RUN("INTEGER KIND SIZEOF" ${PROG_SRC} - XX - YY - PROG_OUTPUT1 +foreach (KIND ${VAR}) + set (PROG_SRC_${KIND} + " + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER (KIND=${KIND}) a + OPEN(8,FILE='pac_validIntKinds.out',FORM='formatted') + WRITE(8,'(I0)') ${FC_SIZEOF_A} + CLOSE(8) + END + " ) + if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC_${KIND}} VALIDINTKINDS_RESULT_${KIND} SRC_EXT f90) + else () + FORTRAN_RUN("INTEGER KIND SIZEOF" ${PROG_SRC_${KIND}} XX YY VALIDINTKINDS_RESULT_${KIND}) + endif () + file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_validIntKinds.out" PROG_OUTPUT1) string (REGEX REPLACE "\n" "" PROG_OUTPUT1 "${PROG_OUTPUT1}") set (pack_int_sizeof "${pack_int_sizeof} ${PROG_OUTPUT1},") endforeach () @@ -233,26 +293,29 @@ math (EXPR _LEN "${LEN_VAR}-1") list (GET VAR ${_LEN} max_real_fortran_kind) foreach (KIND ${VAR} ) - set (PROG_SRC - " - PROGRAM main - USE ISO_C_BINDING - IMPLICIT NONE - REAL (KIND=${KIND}) a - WRITE(*,'(I0)') ${FC_SIZEOF_A} - END - " - ) - FORTRAN_RUN ("REAL KIND SIZEOF" ${PROG_SRC} - XX - YY - PROG_OUTPUT1 + set (PROG_SRC2_${KIND} + " + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + REAL (KIND=${KIND}) a + OPEN(8,FILE='pac_validRealKinds.out',FORM='formatted') + WRITE(8,'(I0)') ${FC_SIZEOF_A} + CLOSE(8) + END + " ) + if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC2_${KIND}} VALIDREALKINDS_RESULT_${KIND} SRC_EXT f90) + else () + FORTRAN_RUN ("REAL KIND SIZEOF" ${PROG_SRC2_${KIND}} XX YY VALIDREALKINDS_RESULT_${KIND}) + endif () + file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_validRealKinds.out" PROG_OUTPUT1) string (REGEX REPLACE "\n" "" PROG_OUTPUT1 "${PROG_OUTPUT1}") set (pack_real_sizeof "${pack_real_sizeof} ${PROG_OUTPUT1},") endforeach () -if (pack_int_sizeof STREQUAL "") +if (pack_real_sizeof STREQUAL "") message (FATAL_ERROR "Failed to find available REAL KINDs for Fortran") endif () @@ -263,7 +326,7 @@ string (REGEX REPLACE ",$" "" pack_real_sizeof "${pack_real_sizeof}") #Remove spaces string (REGEX REPLACE " " "" pack_real_sizeof "${pack_real_sizeof}") -set (H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/${pack_real_sizeof}/)") +set (${HDF_PREFIX}_H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/${pack_real_sizeof}/)") message (STATUS "....FOUND SIZEOF for REAL KINDs \{${pack_real_sizeof}\}") @@ -278,7 +341,7 @@ list (GET VAR ${_LEN} max_real_fortran_sizeof) #----------------------------------------------------------------------------- # Find sizeof of native kinds #----------------------------------------------------------------------------- -FORTRAN_RUN ("SIZEOF NATIVE KINDs" +set (PROG_SRC3 " PROGRAM main USE ISO_C_BINDING @@ -286,18 +349,23 @@ FORTRAN_RUN ("SIZEOF NATIVE KINDs" INTEGER a REAL b DOUBLE PRECISION c - WRITE(*,*) ${FC_SIZEOF_A} - WRITE(*,*) kind(a) - WRITE(*,*) ${FC_SIZEOF_B} - WRITE(*,*) kind(b) - WRITE(*,*) ${FC_SIZEOF_C} - WRITE(*,*) kind(c) + OPEN(8,FILE='pac_sizeof_native_kinds.out',FORM='formatted') + WRITE(8,*) ${FC_SIZEOF_A} + WRITE(8,*) kind(a) + WRITE(8,*) ${FC_SIZEOF_B} + WRITE(8,*) kind(b) + WRITE(8,*) ${FC_SIZEOF_C} + WRITE(8,*) kind(c) + CLOSE(8) END " - XX - YY - PROG_OUTPUT ) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC3} PAC_SIZEOF_NATIVE_KINDS_RESULT SRC_EXT f90) +else () + FORTRAN_RUN ("SIZEOF NATIVE KINDs" ${PROG_SRC3} XX YY PAC_SIZEOF_NATIVE_KINDS_RESULT) +endif () +file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_sizeof_native_kinds.out" PROG_OUTPUT) # dnl The output from the above program will be: # dnl -- LINE 1 -- sizeof INTEGER # dnl -- LINE 2 -- kind of INTEGER @@ -336,13 +404,12 @@ if (NOT PAC_FORTRAN_NATIVE_DOUBLE_KIND) endif () -set (FORTRAN_SIZEOF_LONG_DOUBLE ${${HDF_PREFIX}_SIZEOF_LONG_DOUBLE}) -#set (H5_SIZEOF_LONG_DOUBLE ${${HDF_PREFIX}_SIZEOF_LONG_DOUBLE}) +set (${HDF_PREFIX}_FORTRAN_SIZEOF_LONG_DOUBLE ${${HDF_PREFIX}_SIZEOF_LONG_DOUBLE}) # remove the invalid kind from the list -if (NOT(${SIZEOF___FLOAT128} EQUAL 0)) - if (NOT(${SIZEOF___FLOAT128} EQUAL ${max_real_fortran_sizeof}) - AND NOT(${FORTRAN_SIZEOF_LONG_DOUBLE} EQUAL ${max_real_fortran_sizeof}) +if (NOT(${${HDF_PREFIX}_SIZEOF___FLOAT128} EQUAL 0)) + if (NOT(${${HDF_PREFIX}_SIZEOF___FLOAT128} EQUAL ${max_real_fortran_sizeof}) + AND NOT(${${HDF_PREFIX}_FORTRAN_SIZEOF_LONG_DOUBLE} EQUAL ${max_real_fortran_sizeof}) # account for the fact that the C compiler can have 16-byte __float128 and the fortran compiler only has 8-byte doubles, # so we don't want to remove the 8-byte fortran doubles. AND NOT(${PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF} EQUAL ${max_real_fortran_sizeof})) @@ -355,76 +422,80 @@ if (NOT(${SIZEOF___FLOAT128} EQUAL 0)) endif () endif () -set (H5CONFIG_F_NUM_RKIND "INTEGER, PARAMETER :: num_rkinds = ${NUM_RKIND}") +set (${HDF_PREFIX}_H5CONFIG_F_NUM_RKIND "INTEGER, PARAMETER :: num_rkinds = ${NUM_RKIND}") string (REGEX REPLACE "{" "" OUT_VAR ${PAC_FC_ALL_REAL_KINDS}) string (REGEX REPLACE "}" "" OUT_VAR ${OUT_VAR}) -set (H5CONFIG_F_RKIND "INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/${OUT_VAR}/)") +set (${HDF_PREFIX}_H5CONFIG_F_RKIND "INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/${OUT_VAR}/)") string (REGEX REPLACE "{" "" OUT_VAR ${PAC_FC_ALL_REAL_KINDS_SIZEOF}) string (REGEX REPLACE "}" "" OUT_VAR ${OUT_VAR}) -set (H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/${OUT_VAR}/)") +set (${HDF_PREFIX}_H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/${OUT_VAR}/)") ENABLE_LANGUAGE (C) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") +include (CheckCSourceRuns) +else () #----------------------------------------------------------------------------- # The provided CMake C macros don't provide a general compile/run function # so this one is used. #----------------------------------------------------------------------------- -macro (C_RUN FUNCTION CODE RETURN) - message (STATUS "Detecting C ${FUNCTION}") - if (CMAKE_REQUIRED_LIBRARIES) +macro (C_RUN FUNCTION_NAME SOURCE_CODE RETURN_VAR) + message (STATUS "Detecting C ${FUNCTION_NAME}") + if (HDF5_REQUIRED_LIBRARIES) set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") + "-DLINK_LIBRARIES:STRING=${HDF5_REQUIRED_LIBRARIES}") else () set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) endif () file (WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c - ${CODE} + ${SOURCE_CODE} ) TRY_RUN (RUN_RESULT_VAR COMPILE_RESULT_VAR ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" - RUN_OUTPUT_VARIABLE OUTPUT + RUN_OUTPUT_VARIABLE OUTPUT_VAR ) - set (${RETURN} ${OUTPUT}) + set (${RETURN_VAR} ${OUTPUT_VAR}) - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test COMPILE_RESULT_VAR ${COMPILE_RESULT_VAR} ") - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test RUN_RESULT_VAR ${RUN_RESULT_VAR} ") - #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + #message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + #message (STATUS "Test COMPILE_RESULT_VAR ${COMPILE_RESULT_VAR} ") + #message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + #message (STATUS "Test RUN_RESULT_VAR ${RUN_RESULT_VAR} ") + #message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") if (${COMPILE_RESULT_VAR}) if (${RUN_RESULT_VAR} MATCHES 1) - set (${RUN_RESULT_VAR} 1 CACHE INTERNAL "Have C function ${FUNCTION}") - message (STATUS "Testing C ${FUNCTION} - OK") + set (${RUN_RESULT_VAR} 1 CACHE INTERNAL "Have C function ${FUNCTION_NAME}") + message (STATUS "Testing C ${FUNCTION_NAME} - OK") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log - "Determining if the C ${FUNCTION} exists passed with the following output:\n" - "${OUTPUT}\n\n" + "Determining if the C ${FUNCTION_NAME} exists passed with the following output:\n" + "${OUTPUT_VAR}\n\n" ) else () - message (STATUS "Testing C ${FUNCTION} - Fail") - set (${RUN_RESULT_VAR} 0 CACHE INTERNAL "Have C function ${FUNCTION}") + message (STATUS "Testing C ${FUNCTION_NAME} - Fail") + set (${RUN_RESULT_VAR} 0 CACHE INTERNAL "Have C function ${FUNCTION_NAME}") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Determining if the C ${FUNCTION} exists failed with the following output:\n" - "${OUTPUT}\n\n") + "Determining if the C ${FUNCTION_NAME} exists failed with the following output:\n" + "${OUTPUT_VAR}\n\n") endif () else () - message (FATAL_ERROR "Compilation of C ${FUNCTION} - Failed") + message (FATAL_ERROR "Compilation of C ${FUNCTION_NAME} - Failed") endif () endmacro () +endif () set (PROG_SRC " #include <float.h> #include <stdio.h> -#define CHECK_FLOAT128 ${SIZEOF___FLOAT128} +#define CHECK_FLOAT128 ${${HDF_PREFIX}_SIZEOF___FLOAT128} #if CHECK_FLOAT128!=0 -# if ${HAVE_QUADMATH}!=0 +# if ${${HDF_PREFIX}_HAVE_QUADMATH_H}!=0 #include <quadmath.h> # endif # ifdef FLT128_DIG @@ -447,7 +518,11 @@ set (PROG_SRC " ) -C_RUN ("maximum decimal precision for C" ${PROG_SRC} PROG_OUTPUT) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_c_source_runs (${PROG_SRC} PROG_OUTPUT) +else () + C_RUN ("maximum decimal precision for C" ${PROG_SRC} PROG_OUTPUT) +endif () # dnl The output from the above program will be: # dnl -- LINE 1 -- long double decimal precision @@ -459,19 +534,19 @@ string (REGEX REPLACE "\n" ";" PROG_OUTPUT "${PROG_OUTPUT}") list (GET PROG_OUTPUT 0 LDBL_DIG) list (GET PROG_OUTPUT 1 FLT128_DIG) -if (SIZEOF___FLOAT128 EQUAL 0 OR FLT128_DIG EQUAL 0) - set (H5_HAVE_FLOAT128 0) - set (SIZEOF___FLOAT128 0) - set (H5_PAC_C_MAX_REAL_PRECISION ${LDBL_DIG}) +if (${HDF_PREFIX}_SIZEOF___FLOAT128 EQUAL 0 OR FLT128_DIG EQUAL 0) + set (${HDF_PREFIX}_HAVE_FLOAT128 0) + set (${HDF_PREFIX}_SIZEOF___FLOAT128 0) + set (${HDF_PREFIX}_PAC_C_MAX_REAL_PRECISION ${LDBL_DIG}) else () - set(H5_PAC_C_MAX_REAL_PRECISION ${FLT128_DIG}) + set(${HDF_PREFIX}_PAC_C_MAX_REAL_PRECISION ${FLT128_DIG}) endif () # Setting definition if there is a 16 byte fortran integer string (FIND ${PAC_FC_ALL_INTEGER_KINDS_SIZEOF} "16" pos) if (${pos} EQUAL -1) - set (HAVE_Fortran_INTEGER_SIZEOF_16 0) + set (${HDF_PREFIX}_HAVE_Fortran_INTEGER_SIZEOF_16 0) else () - set (HAVE_Fortran_INTEGER_SIZEOF_16 1) + set (${HDF_PREFIX}_HAVE_Fortran_INTEGER_SIZEOF_16 1) endif () diff --git a/config/cmake/HDF5_Examples.cmake.in b/config/cmake/HDF5_Examples.cmake.in index bede701..273f32a 100644 --- a/config/cmake/HDF5_Examples.cmake.in +++ b/config/cmake/HDF5_Examples.cmake.in @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required(VERSION 3.2.2 FATAL_ERROR) +cmake_minimum_required (VERSION 3.12) ############################################################################################################### # This script will build and run the examples from a folder # Execute from a command line: @@ -20,6 +20,9 @@ set(CTEST_CMAKE_GENERATOR "@CMAKE_GENERATOR@") if("@CMAKE_GENERATOR_TOOLSET@") set(CMAKE_GENERATOR_TOOLSET "@CMAKE_GENERATOR_TOOLSET@") endif() +if("@CMAKE_GENERATOR_ARCHITECTURE@") + set(CMAKE_GENERATOR_ARCHITECTURE "@CMAKE_GENERATOR_ARCHITECTURE@") +endif() set(CTEST_DASHBOARD_ROOT ${CTEST_SCRIPT_DIRECTORY}) # handle input parameters to script. @@ -48,7 +51,11 @@ set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCTEST_CONFIGURATION_TYPE:STRING=${ ################################################################## if(NOT DEFINED INSTALLDIR) - set(INSTALLDIR "@CMAKE_INSTALL_PREFIX@") + if(WIN32) + set(INSTALLDIR "C:/Program Files/HDF_Group/@HDF5_PACKAGE_NAME@/@HDF5_PACKAGE_VERSION@") + else() + set(INSTALLDIR "@CMAKE_INSTALL_PREFIX@") + endif() endif() if(NOT DEFINED CTEST_SOURCE_NAME) @@ -70,7 +77,7 @@ set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDN #TAR_SOURCE - name of tarfile #if(NOT DEFINED TAR_SOURCE) -# set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.10.5-Source") +# set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.14.1-Source") #endif() ############################################################################################################### diff --git a/config/cmake/HDF5_Examples_options.cmake b/config/cmake/HDF5_Examples_options.cmake index 386e99c..386e99c 100755..100644 --- a/config/cmake/HDF5_Examples_options.cmake +++ b/config/cmake/HDF5_Examples_options.cmake diff --git a/config/cmake/HDFCXXCompilerFlags.cmake b/config/cmake/HDFCXXCompilerFlags.cmake new file mode 100644 index 0000000..7bbebbc --- /dev/null +++ b/config/cmake/HDFCXXCompilerFlags.cmake @@ -0,0 +1,354 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +set(CMAKE_CXX_STANDARD 98) +set(CMAKE_CXX_STANDARD_REQUIRED TRUE) +set(CMAKE_CXX_EXTENSIONS OFF) + +set (CMAKE_CXX_FLAGS "${CMAKE_CXX_SANITIZER_FLAGS} ${CMAKE_CXX_FLAGS}") +message (STATUS "Warnings Configuration: CXX default: ${CMAKE_CXX_FLAGS}") +#----------------------------------------------------------------------------- +# Compiler specific flags : Shouldn't there be compiler tests for these +#----------------------------------------------------------------------------- +if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_CXX_FLAGS}") + if (${HDF_CFG_NAME} MATCHES "Debug") + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Og -ftrapv -fno-common") + endif () + else () + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fstdarg-opt") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to disable compiler warnings +#----------------------------------------------------------------------------- +if (HDF5_DISABLE_COMPILER_WARNINGS) + message (STATUS "....Compiler warnings are suppressed") + # MSVC uses /w to suppress warnings. It also complains if another + # warning level is given, so remove it. + if (MSVC) + set (HDF5_WARNINGS_BLOCKED 1) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W0") + endif () + endif () + if (WIN32) + add_definitions (-D_CRT_SECURE_NO_WARNINGS) + endif () + + # Most compilers use -w to suppress warnings. + if (NOT HDF5_WARNINGS_BLOCKED) + if (CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -w") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- +# CDash is configured to only allow 3000 warnings, so +# break into groups (from the config/gnu-flags file) +#----------------------------------------------------------------------------- +if (NOT MSVC AND NOT MINGW) + if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") + list (APPEND HDF5_CMAKE_CXX_FLAGS "-erroff=%none -DBSD_COMP") + else () + # General flags + # + # Note that some of the flags listed here really should be developer + # flags (listed in a separate variable, below) but we put them here + # because they are not raised by the current code and we'd like to + # know if they do start showing up. + # + # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) + # warnings that are emitted. If you need it, add it at configure time. + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/general") + if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 18.0) + list (APPEND H5_CXXFLAGS0 "-Wextra-tokens -Wformat -Wformat-security -Wic-pointer -Wshadow") + list (APPEND H5_CXXFLAGS0 "-Wsign-compare -Wtrigraphs -Wwrite-strings") + endif() + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED + AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + # add the general CXX flags for g++ compiler versions 4.8 and above. + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-general") + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-error-general") + endif () + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/clang-warnings/general") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_CXX_FLAGS "-Minform=inform") + endif () + message (STATUS "CMAKE_CXX_FLAGS_GENERAL=${HDF5_CMAKE_CXX_FLAGS}") + endif () + + #----------------------------------------------------------------------------- + # Option to allow the user to enable developer warnings + # Developer warnings (suggestions from gcc, not code problems) + #----------------------------------------------------------------------------- + if (HDF5_ENABLE_DEV_WARNINGS) + message (STATUS "....HDF5 developer group warnings are enabled") + # if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + # list (APPEND H5_CXXFLAGS0 "-Winline -Wreorder -Wport -Wstrict-aliasing") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-general") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + # ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/developer-general") + endif () + else () + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-general") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + # ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/no-developer-general") + endif () + endif () + + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # Technically, variable-length arrays are part of the C99 standard, but + # we should approach them a bit cautiously... Only needed for gcc 4.X + if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0 AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8-4.last") + endif () + + # Append more extra warning flags that only gcc 4.8+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-4.8") + else () + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-4.8") + endif () + endif () + + # Append more extra warning flags that only gcc 4.9+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.9") + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-4.9") + endif () + + # Append more extra warning flags that only gcc 5.1+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-5") + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-error-5") + endif () + + # Append more extra warning flags that only gcc 6.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 6.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/6") + endif () + + # Append more extra warning flags that only gcc 7.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXxFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/7") + if (HDF5_ENABLE_DEV_WARNINGS) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-7") + #else () + # ADD_H5_FLAGS (H5_CXXFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-7") + endif () + endif () + + # Append more extra warning flags that only gcc 8.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 8.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/8") + #ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-8") + if (HDF5_ENABLE_DEV_WARNINGS) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-8") + else () + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-8") + endif () + endif () + + # Append more extra warning flags that only gcc 9.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 9.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS4 "${HDF5_SOURCE_DIR}/config/gnu-warnings/9") + endif () + endif () +else () + if (NOT MINGW) + list (APPEND HDF5_CMAKE_CXX_FLAGS "/EHsc") + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable all warnings +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_ALL_WARNINGS) + message (STATUS "....All Warnings are enabled") + if (MSVC) + if (HDF5_ENABLE_DEV_WARNINGS) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/Wall /wd4668") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") + endif () + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0} ${H5_CXXFLAGS1} ${H5_CXXFLAGS2} ${H5_CXXFLAGS3} ${H5_CXXFLAGS4}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPZERO_WARNINGS) + message (STATUS "....Group Zero warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W1") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPONE_WARNINGS) + message (STATUS "....Group One warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W2") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS1}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPTWO_WARNINGS) + message (STATUS "....Group Two warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS2}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPTHREE_WARNINGS) + message (STATUS "....Group Three warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W4") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS3}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPFOUR_WARNINGS) + message (STATUS "....Group Four warnings are enabled") + if (NOT MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS4}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# This is in here to help some of the GCC based IDES like Eclipse +# and code blocks parse the compiler errors and warnings better. +#----------------------------------------------------------------------------- +if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fmessage-length=0") +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-symbols +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_SYMBOLS MATCHES "YES") + if(CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") + endif () + endif () +elseif (HDF5_ENABLE_SYMBOLS MATCHES "NO") + if(CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + set (CMAKE_CXX_FLAGS "${CMAKE_C_FLAGS} -Wl,-s") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -s") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-profiling +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_PROFILING) + if(CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS "${PROFILE_CXXFLAGS}") + endif () +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-optimization +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_OPTIMIZATION) + if(CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS "${OPTIMIZE_CXXFLAGS}") + endif () +endif () diff --git a/config/cmake/HDFCompilerFlags.cmake b/config/cmake/HDFCompilerFlags.cmake index 5f71f33..31af2f8 100644 --- a/config/cmake/HDFCompilerFlags.cmake +++ b/config/cmake/HDFCompilerFlags.cmake @@ -9,32 +9,25 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # +set(CMAKE_C_STANDARD 99) +set(CMAKE_C_STANDARD_REQUIRED TRUE) + +set (CMAKE_C_FLAGS "${CMAKE_C99_STANDARD_COMPILE_OPTION} ${CMAKE_C_FLAGS}") +set (CMAKE_C_FLAGS "${CMAKE_C_SANITIZER_FLAGS} ${CMAKE_C_FLAGS}") +set (CMAKE_CXX_FLAGS "${CMAKE_CXX_SANITIZER_FLAGS} ${CMAKE_CXX_FLAGS}") +message (STATUS "Warnings Configuration: default: ${CMAKE_C_FLAGS} : ${CMAKE_CXX_FLAGS}") #----------------------------------------------------------------------------- # Compiler specific flags : Shouldn't there be compiler tests for these #----------------------------------------------------------------------------- if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_BUILD_TYPE MATCHES Debug) - set (CMAKE_C_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_C_FLAGS} -std=c99") + set (CMAKE_C_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_C_FLAGS}") + if (${HDF_CFG_NAME} MATCHES "Debug") if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Og -ftrapv -fno-common") endif () - else (CMAKE_BUILD_TYPE MATCHES Debug) - set (CMAKE_C_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_C_FLAGS} -std=c99") - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fstdarg-opt") - endif () - endif () -endif () -if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - if (CMAKE_BUILD_TYPE MATCHES Debug) - set (CMAKE_CXX_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_CXX_FLAGS}") - if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Og -ftrapv -fno-common") - endif () else () - set (CMAKE_CXX_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_CXX_FLAGS}") - if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fstdarg-opt") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fstdarg-opt") endif () endif () endif () @@ -44,14 +37,13 @@ endif () #----------------------------------------------------------------------------- option (HDF5_DISABLE_COMPILER_WARNINGS "Disable compiler warnings" OFF) if (HDF5_DISABLE_COMPILER_WARNINGS) + message (STATUS "....Compiler warnings are suppressed") # MSVC uses /w to suppress warnings. It also complains if another # warning level is given, so remove it. if (MSVC) set (HDF5_WARNINGS_BLOCKED 1) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /w") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /w") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W0") endif () if (WIN32) add_definitions (-D_CRT_SECURE_NO_WARNINGS) @@ -65,142 +57,141 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) # Most compilers use -w to suppress warnings. if (NOT HDF5_WARNINGS_BLOCKED) set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -w") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -w") endif () endif () #----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- # CDash is configured to only allow 3000 warnings, so # break into groups (from the config/gnu-flags file) #----------------------------------------------------------------------------- -if (NOT MSVC AND CMAKE_COMPILER_IS_GNUCC) - if (NOT ${CMAKE_SYSTEM_NAME} MATCHES "SunOS") - set (CMAKE_C_FLAGS_5 "${CMAKE_C_FLAGS_5} -Wcast-qual") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs") +if (NOT MSVC AND NOT MINGW) + if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") + list (APPEND HDF5_CMAKE_C_FLAGS "-erroff=%none -DBSD_COMP") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -erroff=%none -DBSD_COMP") + # General flags + # + # Note that some of the flags listed here really should be developer + # flags (listed in a separate variable, below) but we put them here + # because they are not raised by the current code and we'd like to + # know if they do start showing up. + # + # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) + # warnings that are emitted. If you need it, add it at configure time. + if (CMAKE_C_COMPILER_ID STREQUAL "Intel") + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/general") + list (APPEND H5_CFLAGS0 "-Wcomment -Wdeprecated -Wmain -Wmissing-declarations -Wmissing-prototypes -Wp64 -Wpointer-arith") + list (APPEND H5_CFLAGS0 "-Wreturn-type -Wstrict-prototypes -Wuninitialized") + list (APPEND H5_CFLAGS0 "-Wunknown-pragmas -Wunused-function -Wunused-variable") + # this is just a failsafe + list (APPEND H5_CFLAGS0 "-finline-functions") + if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 18.0) + list (APPEND H5_CFLAGS0 "-Wextra-tokens -Wformat -Wformat-security -Wic-pointer -Wshadow") + list (APPEND H5_CFLAGS0 "-Wsign-compare -Wtrigraphs -Wwrite-strings") + endif() + elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") + # Add general CFlags for GCC versions 4.8 and above + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/general") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-general") + endif () + # gcc automatically inlines based on the optimization level + # this is just a failsafe + list (APPEND H5_CFLAGS0 "-finline-functions") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/clang-warnings/general") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/error-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_C_FLAGS "-Minform=inform") + endif () + message (STATUS "CMAKE_C_FLAGS_GENERAL=${HDF5_CMAKE_C_FLAGS}") endif () - #----------------------------------------------------------------------------- - # Option to allow the user to enable developer warnings - #----------------------------------------------------------------------------- - option (HDF5_ENABLE_DEV_WARNINGS "Enable HDF5 developer group warnings" OFF) - if (HDF5_ENABLE_DEV_WARNINGS) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Winline -Waggregate-return") - else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wno-unused-parameter -Wno-inline -Wno-aggregate-return") + #----------------------------------------------------------------------------- + # Option to allow the user to enable developer warnings + # Developer warnings (suggestions from gcc, not code problems) + #----------------------------------------------------------------------------- + option (HDF5_ENABLE_DEV_WARNINGS "Enable HDF5 developer group warnings" OFF) + if (HDF5_ENABLE_DEV_WARNINGS) + message (STATUS "....HDF5 developer group warnings are enabled") + if (CMAKE_C_COMPILER_ID STREQUAL "Intel") + list (APPEND H5_CFLAGS0 "-Winline -Wreorder -Wport -Wstrict-aliasing") + elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/developer-general") endif () - - # Append warning flags - # Don't use the '-Wtraditional' flag, we're way past having K&R C code - # set (H5_CFLAGS "${H5_CFLAGS} -Wtraditional") - # Don't use the '-Wtraditional-conversion' flag, there's too many warnings - # from GCC's assert macro - # set (H5_CFLAGS "${H5_CFLAGS} -Wtraditional-conversion") - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #set (H5_CFLAGS "${H5_CFLAGS} -Wfloat-equal -Wmissing-format-attribute -Wpadded") - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wfloat-equal -Wmissing-format-attribute") - - # Append warning flags from gcc-3.2* case - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wpacked -Wdisabled-optimization") - if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wmissing-noreturn") - else () - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wno-missing-noreturn") + else () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/no-developer-general") endif () + endif () - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - set (H5_CFLAGS1_5 "${H5_CFLAGS1_5} -Wformat=2") - - # Append warning flags from gcc-3.3* case - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wendif-labels") - - # Append warning flags from gcc-3.4* case - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch") - - # Append more extra warning flags that only gcc4.0+ know about - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros") - - # Append more extra warning flags that only gcc 4.1+ know about - set (H5_CFLAGS2_5 "${H5_CFLAGS2_5} -Wunsafe-loop-optimizations") - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wc++-compat") - - # Append more extra warning flags that only gcc 4.2+ know about - set (H5_CFLAGS2_5 "${H5_CFLAGS2_5} -Wstrict-overflow") - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-strict-overflow") - # Append more extra warning flags that only gcc 4.3+ know about - # + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wlogical-op -Wlarger-than=2048 -Wvla") - - # Append more extra warning flags that only gcc 4.4+ know about - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat") - - # Append more extra warning flags that only gcc 4.5+ know about - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.5) - set (H5_CFLAGS2_5 "${H5_CFLAGS2_5} -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants") - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wjump-misses-init -Wunsuffixed-float-constants") - endif () - - # Append more extra warning flags that only gcc 4.6+ know about - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wdouble-promotion -Wtrampolines") - if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=const") - else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=const") - endif () - endif () - - # The "unreachable code" warning appears to be reliable now... - # (this warning was removed in gcc 4.5+) - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wunreachable-code") - endif () - - # Append more extra warning flags that only gcc 4.7+ know about - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wstack-usage=8192 -Wvector-operation-performance") - if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn") - else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn") - endif () + # we should approach them a bit cautiously... Only needed for gcc 4.X + if (CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0 AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8-4.last") endif () # Append more extra warning flags that only gcc 4.8+ know about if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8") if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=format") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-4.8") else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=format") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-4.8") endif () endif () # Append more extra warning flags that only gcc 4.9+ know about if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.9) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wdate-time -Wopenmp-simd") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.9") endif () - # (There was no release of gcc 5.0) - - # Append more extra warning flags that only gcc 5.1+ know about - if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.1) - set (H5_CFLAGS3 "${H5_CFLAGS3} -Warray-bounds=2 -Wc99-c11-compat") + # Append more extra warning flags that only gcc 5.x+ know about + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/5") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-5") endif () # Append more extra warning flags that only gcc 6.x+ know about if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 6.0) - set (H5_CFLAGS4 "${H5_CFLAGS4} -Wnull-dereference -Wunused-const-variable -Wduplicated-cond -Whsa") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/6") + endif () + + # Append more extra warning flags that only gcc 7.x+ know about + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 7.0) + ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/7") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-7") + #else () + # ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-7") + endif () endif () + # Append more extra warning flags that only gcc 8.x+ know about + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 8.0) + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/8") + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-8") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-8") + else () + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-8") + endif () + endif () + + # Append more extra warning flags that only gcc 9.x+ know about + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.0) + ADD_H5_FLAGS (H5_CFLAGS4 "${HDF5_SOURCE_DIR}/config/gnu-warnings/9") + endif () + endif () endif () #----------------------------------------------------------------------------- @@ -208,22 +199,17 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_ALL_WARNINGS "Enable all warnings" OFF) if (HDF5_ENABLE_ALL_WARNINGS) + message (STATUS "....All Warnings are enabled") if (MSVC) if (HDF5_ENABLE_DEV_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Wall /wd4668") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /Wall /wd4668") + list (APPEND HDF5_CMAKE_C_FLAGS "/Wall /wd4668") else () string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W3") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W3") + list (APPEND HDF5_CMAKE_C_FLAGS "/W3") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -pedantic ${H5_CFLAGS1} ${H5_CFLAGS2}") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0} ${H5_CFLAGS1} ${H5_CFLAGS2} ${H5_CFLAGS3} ${H5_CFLAGS4}) endif () endif () @@ -232,15 +218,12 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_GROUPZERO_WARNINGS "Enable group zero warnings" OFF) if (HDF5_ENABLE_GROUPZERO_WARNINGS) + message (STATUS "....Group Zero warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W1") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W1") + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W1") else () - if (CMAKE_COMPILER_IS_GNUCC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -pedantic") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0}) endif () endif () @@ -249,13 +232,12 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_GROUPONE_WARNINGS "Enable group one warnings" OFF) if (HDF5_ENABLE_GROUPONE_WARNINGS) + message (STATUS "....Group One warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W2") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W2") + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W2") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS1}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS1}) endif () endif () @@ -264,13 +246,12 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_GROUPTWO_WARNINGS "Enable group two warnings" OFF) if (HDF5_ENABLE_GROUPTWO_WARNINGS) + message (STATUS "....Group Two warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W3") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W3") + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W3") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS2}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS2}) endif () endif () @@ -279,13 +260,12 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_GROUPTHREE_WARNINGS "Enable group three warnings" OFF) if (HDF5_ENABLE_GROUPTHREE_WARNINGS) + message (STATUS "....Group Three warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W4") - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4") + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W4") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS3}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS3}) endif () endif () @@ -294,8 +274,9 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_GROUPFOUR_WARNINGS "Enable group four warnings" OFF) if (HDF5_ENABLE_GROUPFOUR_WARNINGS) + message (STATUS "....Group Four warnings are enabled") if (NOT MSVC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS4}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS4}) endif () endif () @@ -306,6 +287,60 @@ endif () if (CMAKE_COMPILER_IS_GNUCC) set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fmessage-length=0") endif () -if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fmessage-length=0") + +#----------------------------------------------------------------------------- +# Option for --enable-asserts +# By default, CMake adds NDEBUG to CMAKE_${lang}_FLAGS for Release build types +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +#option (HDF5_ENABLE_ASSERTS "Determines whether NDEBUG is defined to control assertions." OFF) +set (HDF5_ENABLE_ASSERTS "OFF" CACHE STRING "Determines whether NDEBUG is defined to control assertions (OFF NO YES)") +set_property (CACHE HDF5_ENABLE_ASSERTS PROPERTY STRINGS OFF NO YES) +if (HDF5_ENABLE_ASSERTS MATCHES "YES") + add_compile_options ("-UNDEBUG") +elseif (HDF5_ENABLE_ASSERTS MATCHES "NO") + add_compile_options ("-DNDEBUG") +endif () +MARK_AS_ADVANCED (HDF5_ENABLE_ASSERTS) + +#----------------------------------------------------------------------------- +# Option for --enable-symbols +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +#option (HDF5_ENABLE_SYMBOLS "Add debug symbols to the library independent of the build mode and optimization level." OFF) +set (HDF5_ENABLE_SYMBOLS "OFF" CACHE STRING "Add debug symbols to the library independent of the build mode and optimization level (OFF NO YES)") +set_property (CACHE HDF5_ENABLE_SYMBOLS PROPERTY STRINGS OFF NO YES) +if (HDF5_ENABLE_SYMBOLS MATCHES "YES") + if (CMAKE_C_COMPILER_ID STREQUAL "Intel") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g") + elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g -fno-omit-frame-pointer") + endif () +elseif (HDF5_ENABLE_SYMBOLS MATCHES "NO") + if (CMAKE_C_COMPILER_ID STREQUAL "Intel") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wl,-s") + elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -s") + endif () +endif () +MARK_AS_ADVANCED (HDF5_ENABLE_SYMBOLS) + +#----------------------------------------------------------------------------- +# Option for --enable-profiling +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +option (HDF5_ENABLE_PROFILING "Enable profiling flags independently from the build mode." OFF) +if (HDF5_ENABLE_PROFILING) + list (APPEND HDF5_CMAKE_C_FLAGS "${PROFILE_CFLAGS}") +endif () +MARK_AS_ADVANCED (HDF5_ENABLE_PROFILING) + +#----------------------------------------------------------------------------- +# Option for --enable-optimization +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +option (HDF5_ENABLE_OPTIMIZATION "Enable optimization flags/settings independently from the build mode" OFF) +if (HDF5_ENABLE_OPTIMIZATION) + list (APPEND HDF5_CMAKE_C_FLAGS "${OPTIMIZE_CFLAGS}") endif () +MARK_AS_ADVANCED (HDF5_ENABLE_OPTIMIZATION) diff --git a/config/cmake/HDFFortranCompilerFlags.cmake b/config/cmake/HDFFortranCompilerFlags.cmake new file mode 100644 index 0000000..15edaa8 --- /dev/null +++ b/config/cmake/HDFFortranCompilerFlags.cmake @@ -0,0 +1,112 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# + +message (STATUS "Warnings Configuration: default Fortran: ${CMAKE_Fortran_FLAGS}") + +#----------------------------------------------------------------------------- +# Option to allow the user to disable compiler warnings +#----------------------------------------------------------------------------- +if (HDF5_DISABLE_COMPILER_WARNINGS) + message (STATUS "....Compiler warnings are suppressed") + # MSVC uses /w to suppress warnings. It also complains if another + # warning level is given, so remove it. + if (MSVC) + set (HDF5_WARNINGS_BLOCKED 1) + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} /warn:none") + endif () + endif () + if (WIN32) + add_definitions (-D_CRT_SECURE_NO_WARNINGS) + endif () + # Borland uses -w- to suppress warnings. + if (BORLAND) + set (HDF5_WARNINGS_BLOCKED 1) + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -w-") + endif () + + # Most compilers use -w to suppress warnings. + if (NOT HDF5_WARNINGS_BLOCKED) + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -w") + endif () +endif () + +#----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- +# CDash is configured to only allow 3000 warnings, so +# break into groups (from the config/gnu-flags file) +#----------------------------------------------------------------------------- +if (NOT MSVC) + # General flags + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/ifort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-stand:f03" "-free") + elseif (CMAKE_Fortran_COMPILER_ID STREQUAL "GNU") + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-ffree-form" "-fimplicit-none") + if (CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 8.0 AND NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.6) + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-std=f2008ts") + else () + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-std=f2008") + endif () + elseif (CMAKE_Fortran_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-Mfreeform" "-Mdclchk" "-Mstandard" "-Mallocatable=03") + endif () + message (STATUS "HDF5_CMAKE_Fortran_FLAGS=${HDF5_CMAKE_Fortran_FLAGS}") + + if (CMAKE_Fortran_COMPILER_ID STREQUAL "GNU") + + # Append more extra warning flags that only gcc 4.8+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-4.8") + endif () + + # Append more extra warning flags that only gcc 4.9+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.9) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-4.9") + #endif () + + # Append more extra warning flags that only gcc 5.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 5.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-5") + endif () + + # Append more extra warning flags that only gcc 6.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 6.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-6") + endif () + + # Append more extra warning flags that only gcc 7.x+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 7.0) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-7") + #endif () + + # Append more extra warning flags that only gcc 8.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 8.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-8") + endif () + + # Append more extra warning flags that only gcc 9.x+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 9.0) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-9") + #endif () + endif () +else () + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + #ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/win-ifort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "/warn:all" "/stand:f03" "/free") + endif () +endif () + diff --git a/config/cmake/PkgInfo.in b/config/cmake/PkgInfo.in index e530f88..ae54035 100644 --- a/config/cmake/PkgInfo.in +++ b/config/cmake/PkgInfo.in @@ -1 +1 @@ -FMWK????
\ No newline at end of file +FMWK???? diff --git a/config/cmake/README.txt.cmake.in b/config/cmake/README.txt.cmake.in index ceeda49..3afebc2 100644 --- a/config/cmake/README.txt.cmake.in +++ b/config/cmake/README.txt.cmake.in @@ -9,7 +9,7 @@ It was built with the following options: -- @LIB_TYPE@ C/C++/Fortran libraries -- SZIP (encoder enabled) and ZLIB -- @LIB_TYPE@ HDF5 tools - -- Java + -- Java @Java_VERSION@ The contents of this directory are: @@ -28,15 +28,16 @@ After Installation The examples folder, HDF5Examples, located in the HDF5 install folder, can be built and tested with CMake and the supplied HDF5_Examples.cmake file. The HDF5_Examples.cmake expects HDF5 to have -been installed in the default location with above compilers. Also, the CMake +been installed in the default location with above compilers (see the +libhdf5.settings file in the lib install folder). Also, the CMake utility should be installed. To test the installation with the examples; Create a directory to run the examples. Copy HDF5Examples folder to this directory. + Copy CTestScript.cmake to this directory. Copy HDF5_Examples.cmake to this directory. Copy HDF5_Examples_options.cmake to this directory. - Copy CTestScript.cmake to this directory. The default source folder is defined as "HDF5Examples". It can be changed with the CTEST_SOURCE_NAME script option. The default installation folder is defined as "@CMAKE_INSTALL_PREFIX@". @@ -62,9 +63,6 @@ For more information see USING_CMake_Examples.txt in the install folder. =========================================================================== Documentation for this release can be found at the following URL: - http://www.hdfgroup.org/HDF5/doc/. - -See the HDF5 home page for further details: - http://hdfgroup.org/HDF5/ + https://portal.hdfgroup.org/display/support Bugs should be reported to help@hdfgroup.org. diff --git a/config/cmake/UseJava.cmake b/config/cmake/UseJava.cmake index 9b3bf02..375004e 100644 --- a/config/cmake/UseJava.cmake +++ b/config/cmake/UseJava.cmake @@ -1,408 +1,373 @@ # Distributed under the OSI-approved BSD 3-Clause License. See https://cmake.org/licensing for details. -#.rst: -# UseJava -# ------- -# -# Use Module for Java -# -# This file provides functions for Java. It is assumed that -# FindJava.cmake has already been loaded. See FindJava.cmake for -# information on how to load Java into your CMake project. -# -# :: -# -# add_jar(target_name -# [SOURCES] source1 [source2 ...] [resource1 ...] -# [INCLUDE_JARS jar1 [jar2 ...]] -# [ENTRY_POINT entry] -# [VERSION version] -# [OUTPUT_NAME name] -# [OUTPUT_DIR dir] -# ) -# -# This command creates a <target_name>.jar. It compiles the given -# source files (source) and adds the given resource files (resource) to -# the jar file. Source files can be java files or listing files -# (prefixed by '@'). If only resource files are given then just a jar file -# is created. The list of include jars are added to the classpath when -# compiling the java sources and also to the dependencies of the target. -# INCLUDE_JARS also accepts other target names created by add_jar. For -# backwards compatibility, jar files listed as sources are ignored (as -# they have been since the first version of this module). -# -# The default OUTPUT_DIR can also be changed by setting the variable -# CMAKE_JAVA_TARGET_OUTPUT_DIR. -# -# Additional instructions: -# -# :: -# -# To add compile flags to the target you can set these flags with -# the following variable: -# -# -# -# :: -# -# set(CMAKE_JAVA_COMPILE_FLAGS -nowarn) -# -# -# -# :: -# -# To add a path or a jar file to the class path you can do this -# with the CMAKE_JAVA_INCLUDE_PATH variable. -# -# -# -# :: -# -# set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar) -# -# -# -# :: -# -# To use a different output name for the target you can set it with: -# -# -# -# :: -# -# add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar) -# -# -# -# :: -# -# To use a different output directory than CMAKE_CURRENT_BINARY_DIR -# you can set it with: -# -# -# -# :: -# -# add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin) -# -# -# -# :: -# -# To define an entry point in your jar you can set it with the ENTRY_POINT -# named argument: -# -# -# -# :: -# -# add_jar(example ENTRY_POINT com/examples/MyProject/Main) -# -# -# -# :: -# -# To define a custom manifest for the jar, you can set it with the manifest -# named argument: -# -# -# -# :: -# -# add_jar(example MANIFEST /path/to/manifest) -# -# -# -# :: -# -# To add a VERSION to the target output name you can set it using -# the VERSION named argument to add_jar. This will create a jar file with the -# name shibboleet-1.0.0.jar and will create a symlink shibboleet.jar -# pointing to the jar with the version information. -# -# -# -# :: -# -# add_jar(shibboleet shibbotleet.java VERSION 1.2.0) -# -# -# -# :: -# -# If the target is a JNI library, utilize the following commands to -# create a JNI symbolic link: -# -# -# -# :: -# -# set(CMAKE_JNI_TARGET TRUE) -# add_jar(shibboleet shibbotleet.java VERSION 1.2.0) -# install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet) -# install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR}) -# -# -# -# :: -# -# If a single target needs to produce more than one jar from its -# java source code, to prevent the accumulation of duplicate class -# files in subsequent jars, set/reset CMAKE_JAR_CLASSES_PREFIX prior -# to calling the add_jar() function: -# -# -# -# :: -# -# set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo) -# add_jar(foo foo.java) -# -# -# -# :: -# -# set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar) -# add_jar(bar bar.java) -# -# -# -# Target Properties: -# -# :: -# -# The add_jar() function sets some target properties. You can get these -# properties with the -# get_property(TARGET <target_name> PROPERTY <propery_name>) -# command. -# -# -# -# :: -# -# INSTALL_FILES The files which should be installed. This is used by -# install_jar(). -# JNI_SYMLINK The JNI symlink which should be installed. -# This is used by install_jni_symlink(). -# JAR_FILE The location of the jar file so that you can include -# it. -# CLASSDIR The directory where the class files can be found. For -# example to use them with javah. -# -# :: -# -# find_jar(<VAR> -# name | NAMES name1 [name2 ...] -# [PATHS path1 [path2 ... ENV var]] -# [VERSIONS version1 [version2]] -# [DOC "cache documentation string"] -# ) -# -# This command is used to find a full path to the named jar. A cache -# entry named by <VAR> is created to stor the result of this command. -# If the full path to a jar is found the result is stored in the -# variable and the search will not repeated unless the variable is -# cleared. If nothing is found, the result will be <VAR>-NOTFOUND, and -# the search will be attempted again next time find_jar is invoked with -# the same variable. The name of the full path to a file that is -# searched for is specified by the names listed after NAMES argument. -# Additional search locations can be specified after the PATHS argument. -# If you require special a version of a jar file you can specify it with -# the VERSIONS argument. The argument after DOC will be used for the -# documentation string in the cache. -# -# :: -# -# install_jar(target_name destination) -# install_jar(target_name DESTINATION destination [COMPONENT component]) -# -# This command installs the TARGET_NAME files to the given DESTINATION. -# It should be called in the same scope as add_jar() or it will fail. -# -# Target Properties: -# -# :: -# -# The install_jar() function sets the INSTALL_DESTINATION target property -# on jars so installed. This property holds the DESTINATION as described -# above, and is used by install_jar_exports(). You can get this property -# with the -# get_property(TARGET <target_name> PROPERTY INSTALL_DESTINATION) -# command. -# -# -# -# :: -# -# install_jni_symlink(target_name destination) -# install_jni_symlink(target_name DESTINATION destination [COMPONENT component]) -# -# This command installs the TARGET_NAME JNI symlinks to the given -# DESTINATION. It should be called in the same scope as add_jar() or it -# will fail. -# -# :: -# -# install_jar_exports(TARGETS jars... -# [NAMESPACE <namespace>] -# FILE <filename> -# DESTINATION <dir> [COMPONENT <component>]) -# -# This command installs a target export file ``<filename>`` for the named jar -# targets to the given ``DESTINATION``. Its function is similar to that of -# :command:`install(EXPORTS ...)`. -# -# :: -# -# export_jars(TARGETS jars... -# [NAMESPACE <namespace>] -# FILE <filename>) -# -# This command writes a target export file ``<filename>`` for the named jar -# targets. Its function is similar to that of :command:`export(...)`. -# -# :: -# -# create_javadoc(<VAR> -# PACKAGES pkg1 [pkg2 ...] -# [SOURCEPATH <sourcepath>] -# [CLASSPATH <classpath>] -# [INSTALLPATH <install path>] -# [DOCTITLE "the documentation title"] -# [WINDOWTITLE "the title of the document"] -# [AUTHOR TRUE|FALSE] -# [USE TRUE|FALSE] -# [VERSION TRUE|FALSE] -# ) -# -# Create java documentation based on files or packages. For more -# details please read the javadoc manpage. -# -# There are two main signatures for create_javadoc. The first signature -# works with package names on a path with source files: -# -# :: -# -# Example: -# create_javadoc(my_example_doc -# PACKAGES com.exmaple.foo com.example.bar -# SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}" -# CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH} -# WINDOWTITLE "My example" -# DOCTITLE "<h1>My example</h1>" -# AUTHOR TRUE -# USE TRUE -# VERSION TRUE -# ) -# -# -# -# The second signature for create_javadoc works on a given list of -# files. -# -# :: -# -# create_javadoc(<VAR> -# FILES file1 [file2 ...] -# [CLASSPATH <classpath>] -# [INSTALLPATH <install path>] -# [DOCTITLE "the documentation title"] -# [WINDOWTITLE "the title of the document"] -# [AUTHOR TRUE|FALSE] -# [USE TRUE|FALSE] -# [VERSION TRUE|FALSE] -# ) -# -# -# -# Example: -# -# :: -# -# create_javadoc(my_example_doc -# FILES ${example_SRCS} -# CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH} -# WINDOWTITLE "My example" -# DOCTITLE "<h1>My example</h1>" -# AUTHOR TRUE -# USE TRUE -# VERSION TRUE -# ) -# -# -# -# Both signatures share most of the options. These options are the same -# as what you can find in the javadoc manpage. Please look at the -# manpage for CLASSPATH, DOCTITLE, WINDOWTITLE, AUTHOR, USE and VERSION. -# -# The documentation will be by default installed to -# -# :: -# -# ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR> -# -# -# -# if you don't set the INSTALLPATH. -# -# :: -# -# create_javah(TARGET <target> -# GENERATED_FILES <VAR> -# CLASSES <class>... -# [CLASSPATH <classpath>...] -# [DEPENDS <depend>...] -# [OUTPUT_NAME <path>|OUTPUT_DIR <path>] -# ) -# -# Create C header files from java classes. These files provide the connective glue -# that allow your Java and C code to interact. -# -# There are two main signatures for create_javah. The first signature -# returns generated files through variable specified by GENERATED_FILES option: -# -# :: -# -# Example: -# Create_javah(GENERATED_FILES files_headers -# CLASSES org.cmake.HelloWorld -# CLASSPATH hello.jar -# ) -# -# -# -# The second signature for create_javah creates a target which encapsulates -# header files generation. -# -# :: -# -# Example: -# Create_javah(TARGET target_headers -# CLASSES org.cmake.HelloWorld -# CLASSPATH hello.jar -# ) -# -# -# -# Both signatures share same options. -# -# ``CLASSES <class>...`` -# Specifies Java classes used to generate headers. -# -# ``CLASSPATH <classpath>...`` -# Specifies various paths to look up classes. Here .class files, jar files or targets -# created by command add_jar can be used. -# -# ``DEPENDS <depend>...`` -# Targets on which the javah target depends -# -# ``OUTPUT_NAME <path>`` -# Concatenates the resulting header files for all the classes listed by option CLASSES -# into <path>. Same behavior as option '-o' of javah tool. -# -# ``OUTPUT_DIR <path>`` -# Sets the directory where the header files will be generated. Same behavior as option -# '-d' of javah tool. If not specified, ${CMAKE_CURRENT_BINARY_DIR} is used as output directory. +#[=======================================================================[.rst: +UseJava +------- + +Use Module for Java + +This file provides functions for Java. It is assumed that +:module:`FindJava` has already been loaded. See :module:`FindJava` for +information on how to load Java into your CMake project. + +Creating And Installing JARs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: cmake + + add_jar(<target_name> + [SOURCES] <source1> [<source2>...] [<resource1>...] + [INCLUDE_JARS <jar1> [<jar2>...]] + [ENTRY_POINT <entry>] + [VERSION <version>] + [OUTPUT_NAME <name>] + [OUTPUT_DIR <dir>] + [GENERATE_NATIVE_HEADERS <target> [DESTINATION <dir>]] + ) + +This command creates a ``<target_name>.jar``. It compiles the given +``<source>`` files and adds the given ``<resource>`` files to +the jar file. Source files can be java files or listing files +(prefixed by ``@``). If only resource files are given then just a jar file +is created. The list of ``INCLUDE_JARS`` are added to the classpath when +compiling the java sources and also to the dependencies of the target. +``INCLUDE_JARS`` also accepts other target names created by ``add_jar()``. +For backwards compatibility, jar files listed as sources are ignored (as +they have been since the first version of this module). + +The default ``OUTPUT_DIR`` can also be changed by setting the variable +``CMAKE_JAVA_TARGET_OUTPUT_DIR``. + +Optionally, using option ``GENERATE_NATIVE_HEADERS``, native header files can +be generated for methods declared as native. These files provide the +connective glue that allow your Java and C code to interact. An INTERFACE +target will be created for an easy usage of generated files. Sub-option +``DESTINATION`` can be used to specify the output directory for generated +header files. + +``GENERATE_NATIVE_HEADERS`` option requires, at least, version 1.8 of the JDK. + +The ``add_jar()`` function sets the following target properties on +``<target_name>``: + +``INSTALL_FILES`` + The files which should be installed. This is used by ``install_jar()``. +``JNI_SYMLINK`` + The JNI symlink which should be installed. This is used by + ``install_jni_symlink()``. +``JAR_FILE`` + The location of the jar file so that you can include it. +``CLASSDIR`` + The directory where the class files can be found. For example to use them + with ``javah``. + +.. code-block:: cmake + + install_jar(<target_name> <destination>) + install_jar(<target_name> DESTINATION <destination> [COMPONENT <component>]) + +This command installs the ``<target_name>`` files to the given +``<destination>``. It should be called in the same scope as ``add_jar()`` or +it will fail. + +The ``install_jar()`` function sets the ``INSTALL_DESTINATION`` target +property on jars so installed. This property holds the ``<destination>`` as +described above, and is used by ``install_jar_exports()``. You can get this +information with :command:`get_property` and the ``INSTALL_DESTINATION`` +property key. + +.. code-block:: cmake + + install_jni_symlink(<target_name> <destination>) + install_jni_symlink(<target_name> DESTINATION <destination> [COMPONENT <component>]) + +This command installs the ``<target_name>`` JNI symlinks to the given +``<destination>``. It should be called in the same scope as ``add_jar()`` or +it will fail. + +.. code-block:: cmake + + install_jar_exports(TARGETS <jars>... + [NAMESPACE <namespace>] + FILE <filename> + DESTINATION <destination> [COMPONENT <component>]) + +This command installs a target export file ``<filename>`` for the named jar +targets to the given ``<destination>`` directory. Its function is similar to +that of :command:`install(EXPORTS)`. + +.. code-block:: cmake + + export_jars(TARGETS <jars>... + [NAMESPACE <namespace>] + FILE <filename>) + +This command writes a target export file ``<filename>`` for the named ``<jars>`` +targets. Its function is similar to that of :command:`export`. + + +Examples +"""""""" + +To add compile flags to the target you can set these flags with the following +variable: + +.. code-block:: cmake + + set(CMAKE_JAVA_COMPILE_FLAGS -nowarn) + + +To add a path or a jar file to the class path you can do this with the +``CMAKE_JAVA_INCLUDE_PATH`` variable. + +.. code-block:: cmake + + set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar) + +To use a different output name for the target you can set it with: + +.. code-block:: cmake + + add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar) + +To use a different output directory than ``CMAKE_CURRENT_BINARY_DIR`` you can +set it with: + +.. code-block:: cmake + + add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin) + +To define an entry point in your jar you can set it with the ``ENTRY_POINT`` +named argument: + +.. code-block:: cmake + + add_jar(example ENTRY_POINT com/examples/MyProject/Main) + +To define a custom manifest for the jar, you can set it with the ``MANIFEST`` +named argument: + +.. code-block:: cmake + + add_jar(example MANIFEST /path/to/manifest) + +To add a version to the target output name you can set it using the ``VERSION`` +named argument to ``add_jar()``. The following example will create a jar file +with the name ``shibboleet-1.0.0.jar`` and will create a symlink +``shibboleet.jar`` pointing to the jar with the version information. + +.. code-block:: cmake + + add_jar(shibboleet shibbotleet.java VERSION 1.2.0) + +If the target is a JNI library, utilize the following commands to +create a JNI symbolic link: + +.. code-block:: cmake + + set(CMAKE_JNI_TARGET TRUE) + add_jar(shibboleet shibbotleet.java VERSION 1.2.0) + install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet) + install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR}) + +If a single target needs to produce more than one jar from its +java source code, to prevent the accumulation of duplicate class +files in subsequent jars, set/reset ``CMAKE_JAR_CLASSES_PREFIX`` prior +to calling the ``add_jar()`` function: + +.. code-block:: cmake + + set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo) + add_jar(foo foo.java) + + set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar) + add_jar(bar bar.java) + +For an optimum usage of option ``GENERATE_NATIVE_HEADERS``, it is recommended to +include module JNI before any call to ``add_jar()``. The produced target for +native headers can then be used to compile C/C++ sources with the +:command:`target_link_libraries` command. + +.. code-block:: cmake + + find_package(JNI) + add_jar(foo foo.java GENERATE_NATIVE_HEADERS foo-native) + add_library(bar bar.cpp) + target_link_libraries(bar PRIVATE foo-native) + + +Finding JARs +^^^^^^^^^^^^ + +.. code-block:: cmake + + find_jar(<VAR> + <name> | NAMES <name1> [<name2>...] + [PATHS <path1> [<path2>... ENV <var>]] + [VERSIONS <version1> [<version2>]] + [DOC "cache documentation string"] + ) + +This command is used to find a full path to the named jar. A cache +entry named by ``<VAR>`` is created to store the result of this command. +If the full path to a jar is found the result is stored in the +variable and the search will not repeated unless the variable is +cleared. If nothing is found, the result will be ``<VAR>-NOTFOUND``, and +the search will be attempted again next time ``find_jar()`` is invoked with +the same variable. The name of the full path to a file that is +searched for is specified by the names listed after ``NAMES`` argument. +Additional search locations can be specified after the ``PATHS`` argument. +If you require special a version of a jar file you can specify it with +the ``VERSIONS`` argument. The argument after ``DOC`` will be used for the +documentation string in the cache. + + +Javadoc +^^^^^^^ + +The ``create_javadoc()`` command can be used to create java documentation +based on files or packages. For more details please read the javadoc manpage. + +There are two main signatures for ``create_javadoc()``. The first signature +works with package names on a path with source files. + +.. code-block:: cmake + + create_javadoc(<VAR> + PACKAGES <pkg1> [<pkg2>...] + [SOURCEPATH <sourcepath>] + [CLASSPATH <classpath>] + [INSTALLPATH <install path>] + [DOCTITLE "the documentation title"] + [WINDOWTITLE "the title of the document"] + [AUTHOR TRUE|FALSE] + [USE TRUE|FALSE] + [VERSION TRUE|FALSE] + ) + +For example: + +.. code-block:: cmake + + create_javadoc(my_example_doc + PACKAGES com.example.foo com.example.bar + SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}" + CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH} + WINDOWTITLE "My example" + DOCTITLE "<h1>My example</h1>" + AUTHOR TRUE + USE TRUE + VERSION TRUE + ) + +The second signature for ``create_javadoc()`` works on a given list of +files. + +.. code-block:: cmake + + create_javadoc(<VAR> + FILES <file1> [<file2>...] + [CLASSPATH <classpath>] + [INSTALLPATH <install path>] + [DOCTITLE "the documentation title"] + [WINDOWTITLE "the title of the document"] + [AUTHOR TRUE|FALSE] + [USE TRUE|FALSE] + [VERSION TRUE|FALSE] + ) + +For example: + +.. code-block:: cmake + + create_javadoc(my_example_doc + FILES ${example_SRCS} + CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH} + WINDOWTITLE "My example" + DOCTITLE "<h1>My example</h1>" + AUTHOR TRUE + USE TRUE + VERSION TRUE + ) + +Both signatures share most of the options. These options are the same +as what you can find in the javadoc manpage. Please look at the +manpage for ``CLASSPATH``, ``DOCTITLE``, ``WINDOWTITLE``, ``AUTHOR``, ``USE`` +and ``VERSION``. + +If you don't set the ``INSTALLPATH``, then by default the documentation will +be installed to : + +:: + + ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR> + + +Header Generation +^^^^^^^^^^^^^^^^^ + +.. code-block:: cmake + + create_javah(TARGET <target> | GENERATED_FILES <VAR> + CLASSES <class>... + [CLASSPATH <classpath>...] + [DEPENDS <depend>...] + [OUTPUT_NAME <path>|OUTPUT_DIR <path>] + ) + +Create C header files from java classes. These files provide the connective glue +that allow your Java and C code to interact. + +.. deprecated:: 3.11 + +.. note:: + + This command will no longer be supported starting with version 10 of the JDK + due to the `suppression of javah tool <http://openjdk.java.net/jeps/313>`_. + The ``add_jar(GENERATE_NATIVE_HEADERS)`` command should be used instead. + +There are two main signatures for ``create_javah()``. The first signature +returns generated files through variable specified by the ``GENERATED_FILES`` +option. For example: + +.. code-block:: cmake + + create_javah(GENERATED_FILES files_headers + CLASSES org.cmake.HelloWorld + CLASSPATH hello.jar + ) + +The second signature for ``create_javah()`` creates a target which encapsulates +header files generation. E.g. + +.. code-block:: cmake + + create_javah(TARGET target_headers + CLASSES org.cmake.HelloWorld + CLASSPATH hello.jar + ) + +Both signatures share same options. + +``CLASSES <class>...`` + Specifies Java classes used to generate headers. + +``CLASSPATH <classpath>...`` + Specifies various paths to look up classes. Here .class files, jar files or + targets created by command add_jar can be used. + +``DEPENDS <depend>...`` + Targets on which the javah target depends. + +``OUTPUT_NAME <path>`` + Concatenates the resulting header files for all the classes listed by option + ``CLASSES`` into ``<path>``. Same behavior as option ``-o`` of javah tool. + +``OUTPUT_DIR <path>`` + Sets the directory where the header files will be generated. Same behavior + as option ``-d`` of javah tool. If not specified, + :variable:`CMAKE_CURRENT_BINARY_DIR` is used as the output directory. +#]=======================================================================] include(CMakeParseArguments) @@ -417,8 +382,8 @@ function (__java_copy_file src dest comment) endfunction () function(__java_lcat VAR) - foreach(_line ${ARGN}) - set(${VAR} "${${VAR}}${_line}\n") + foreach(_line IN LISTS ARGN) + string(APPEND ${VAR} "${_line}\n") endforeach() set(${VAR} "${${VAR}}" PARENT_SCOPE) @@ -449,7 +414,7 @@ function(add_jar _TARGET_NAME) cmake_parse_arguments(_add_jar "" "VERSION;OUTPUT_DIR;OUTPUT_NAME;ENTRY_POINT;MANIFEST" - "SOURCES;INCLUDE_JARS" + "SOURCES;INCLUDE_JARS;GENERATE_NATIVE_HEADERS" ${ARGN} ) @@ -482,6 +447,8 @@ function(add_jar _TARGET_NAME) else() get_filename_component(_add_jar_OUTPUT_DIR ${_add_jar_OUTPUT_DIR} ABSOLUTE) endif() + # ensure output directory exists + file (MAKE_DIRECTORY "${_add_jar_OUTPUT_DIR}") if (_add_jar_ENTRY_POINT) set(_ENTRY_POINT_OPTION e) @@ -493,6 +460,31 @@ function(add_jar _TARGET_NAME) get_filename_component (_MANIFEST_VALUE "${_add_jar_MANIFEST}" ABSOLUTE) endif () + unset (_GENERATE_NATIVE_HEADERS) + if (_add_jar_GENERATE_NATIVE_HEADERS) + # Raise an error if JDK version is less than 1.8 because javac -h is not supported + # by earlier versions. + if (Java_VERSION VERSION_LESS 1.8) + message (FATAL_ERROR "ADD_JAR: GENERATE_NATIVE_HEADERS is not supported with this version of Java.") + endif() + cmake_parse_arguments (_add_jar_GENERATE_NATIVE_HEADERS "" "DESTINATION" "" ${_add_jar_GENERATE_NATIVE_HEADERS}) + if (NOT _add_jar_GENERATE_NATIVE_HEADERS_UNPARSED_ARGUMENTS) + message (FATAL_ERROR "ADD_JAR: GENERATE_NATIVE_HEADERS: missing required argument.") + endif() + list (LENGTH _add_jar_GENERATE_NATIVE_HEADERS_UNPARSED_ARGUMENTS length) + if (length GREATER 1) + list (REMOVE_AT _add_jar_GENERATE_NATIVE_HEADERS_UNPARSED_ARGUMENTS 0) + message (FATAL_ERROR "ADD_JAR: GENERATE_NATIVE_HEADERS: ${_add_jar_GENERATE_NATIVE_HEADERS_UNPARSED_ARGUMENTS}: unexpected argument(s).") + endif() + if (NOT _add_jar_GENERATE_NATIVE_HEADERS_DESTINATION) + set (_add_jar_GENERATE_NATIVE_HEADERS_DESTINATION "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/${_TARGET_NAME}.dir/native_headers") + endif() + + set (_GENERATE_NATIVE_HEADERS_TARGET ${_add_jar_GENERATE_NATIVE_HEADERS_UNPARSED_ARGUMENTS}) + set (_GENERATE_NATIVE_HEADERS_OUTPUT_DIR "${_add_jar_GENERATE_NATIVE_HEADERS_DESTINATION}") + set (_GENERATE_NATIVE_HEADERS -h "${_GENERATE_NATIVE_HEADERS_OUTPUT_DIR}") + endif() + if (LIBRARY_OUTPUT_PATH) set(CMAKE_JAVA_LIBRARY_OUTPUT_PATH ${LIBRARY_OUTPUT_PATH}) else () @@ -512,11 +504,11 @@ function(add_jar _TARGET_NAME) set(CMAKE_JAVA_INCLUDE_FLAG_SEP ":") endif() - foreach (JAVA_INCLUDE_DIR ${CMAKE_JAVA_INCLUDE_PATH}) - set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${JAVA_INCLUDE_DIR}") + foreach (JAVA_INCLUDE_DIR IN LISTS CMAKE_JAVA_INCLUDE_PATH) + string(APPEND CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_FLAG_SEP}${JAVA_INCLUDE_DIR}") endforeach() - set(CMAKE_JAVA_CLASS_OUTPUT_PATH "${_add_jar_OUTPUT_DIR}${CMAKE_FILES_DIRECTORY}/${_TARGET_NAME}.dir") + set(CMAKE_JAVA_CLASS_OUTPUT_PATH "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/${_TARGET_NAME}.dir") set(_JAVA_TARGET_OUTPUT_NAME "${_TARGET_NAME}.jar") if (_add_jar_OUTPUT_NAME AND _add_jar_VERSION) @@ -536,7 +528,7 @@ function(add_jar _TARGET_NAME) set(_JAVA_COMPILE_DEPENDS) set(_JAVA_RESOURCE_FILES) set(_JAVA_RESOURCE_FILES_RELATIVE) - foreach(_JAVA_SOURCE_FILE ${_JAVA_SOURCE_FILES}) + foreach(_JAVA_SOURCE_FILE IN LISTS _JAVA_SOURCE_FILES) get_filename_component(_JAVA_EXT ${_JAVA_SOURCE_FILE} EXT) get_filename_component(_JAVA_FILE ${_JAVA_SOURCE_FILE} NAME_WE) get_filename_component(_JAVA_PATH ${_JAVA_SOURCE_FILE} PATH) @@ -544,21 +536,21 @@ function(add_jar _TARGET_NAME) if (_JAVA_SOURCE_FILE MATCHES "^@(.+)$") get_filename_component(_JAVA_FULL ${CMAKE_MATCH_1} ABSOLUTE) - list(APPEND _JAVA_COMPILE_FILELISTS ${_JAVA_FULL}) + list (APPEND _JAVA_COMPILE_FILELISTS ${_JAVA_FULL}) elseif (_JAVA_EXT MATCHES ".java") - file(RELATIVE_PATH _JAVA_REL_BINARY_PATH ${_add_jar_OUTPUT_DIR} ${_JAVA_FULL}) + file(RELATIVE_PATH _JAVA_REL_BINARY_PATH ${CMAKE_CURRENT_BINARY_DIR} ${_JAVA_FULL}) file(RELATIVE_PATH _JAVA_REL_SOURCE_PATH ${CMAKE_CURRENT_SOURCE_DIR} ${_JAVA_FULL}) string(LENGTH ${_JAVA_REL_BINARY_PATH} _BIN_LEN) string(LENGTH ${_JAVA_REL_SOURCE_PATH} _SRC_LEN) - if (${_BIN_LEN} LESS ${_SRC_LEN}) + if (_BIN_LEN LESS _SRC_LEN) set(_JAVA_REL_PATH ${_JAVA_REL_BINARY_PATH}) else () set(_JAVA_REL_PATH ${_JAVA_REL_SOURCE_PATH}) endif () get_filename_component(_JAVA_REL_PATH ${_JAVA_REL_PATH} PATH) - list(APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE}) set(_JAVA_CLASS_FILE "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_REL_PATH}/${_JAVA_FILE}.class") set(_JAVA_CLASS_FILES ${_JAVA_CLASS_FILES} ${_JAVA_CLASS_FILE}) @@ -569,34 +561,34 @@ function(add_jar _TARGET_NAME) # Ignored for backward compatibility elseif (_JAVA_EXT STREQUAL "") - list(APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH}) - list(APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}}) + list (APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH}) + list (APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}}) else () __java_copy_file(${CMAKE_CURRENT_SOURCE_DIR}/${_JAVA_SOURCE_FILE} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE} "Copying ${_JAVA_SOURCE_FILE} to the build directory") - list(APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}) - list(APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE}) endif () endforeach() - foreach(_JAVA_INCLUDE_JAR ${_add_jar_INCLUDE_JARS}) + foreach(_JAVA_INCLUDE_JAR IN LISTS _add_jar_INCLUDE_JARS) if (TARGET ${_JAVA_INCLUDE_JAR}) get_target_property(_JAVA_JAR_PATH ${_JAVA_INCLUDE_JAR} JAR_FILE) if (_JAVA_JAR_PATH) - set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_JAR_PATH}") - list(APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH}) - list(APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR}) - list(APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_INCLUDE_JAR}) + string(APPEND CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_JAR_PATH}") + list (APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH}) + list (APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR}) + list (APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_JAR_PATH}) else () message(SEND_ERROR "add_jar: INCLUDE_JARS target ${_JAVA_INCLUDE_JAR} is not a jar") endif () else () - set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_INCLUDE_JAR}") - list(APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}") - list(APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}") - list(APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}") + string(APPEND CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_INCLUDE_JAR}") + list (APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}") + list (APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}") + list (APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}") endif () endforeach() @@ -624,6 +616,7 @@ function(add_jar _TARGET_NAME) ${CMAKE_JAVA_COMPILE_FLAGS} -classpath "${CMAKE_JAVA_INCLUDE_PATH_FINAL}" -d ${CMAKE_JAVA_CLASS_OUTPUT_PATH} + ${_GENERATE_NATIVE_HEADERS} ${_JAVA_SOURCES_FILELISTS} COMMAND ${CMAKE_COMMAND} -E touch ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME} DEPENDS ${_JAVA_COMPILE_FILES} ${_JAVA_COMPILE_FILELISTS} ${_JAVA_COMPILE_DEPENDS} @@ -641,14 +634,14 @@ function(add_jar _TARGET_NAME) ) else () # create an empty java_class_filelist - if (NOT EXISTS ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist) + if (NOT EXISTS "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist") file(WRITE ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist "") endif() endif () # create the jar file set(_JAVA_JAR_OUTPUT_PATH - ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_NAME}) + "${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_NAME}") if (CMAKE_JNI_TARGET) add_custom_command( OUTPUT ${_JAVA_JAR_OUTPUT_PATH} @@ -734,6 +727,18 @@ function(add_jar _TARGET_NAME) ${CMAKE_JAVA_CLASS_OUTPUT_PATH} ) + if (_GENERATE_NATIVE_HEADERS) + # create an INTERFACE library encapsulating include directory for generated headers + add_library (${_GENERATE_NATIVE_HEADERS_TARGET} INTERFACE) + target_include_directories (${_GENERATE_NATIVE_HEADERS_TARGET} INTERFACE + "${_GENERATE_NATIVE_HEADERS_OUTPUT_DIR}" + ${JNI_INCLUDE_DIRS}) + # this INTERFACE library depends on jar generation + add_dependencies (${_GENERATE_NATIVE_HEADERS_TARGET} ${_TARGET_NAME}) + + set_property (DIRECTORY APPEND PROPERTY ADDITIONAL_CLEAN_FILES + "${_GENERATE_NATIVE_HEADERS_OUTPUT_DIR}") + endif() endfunction() function(INSTALL_JAR _TARGET_NAME) @@ -835,15 +840,15 @@ function (find_jar VARIABLE) set(_state "name") - foreach (arg ${ARGN}) - if (${_state} STREQUAL "name") - if (${arg} STREQUAL "VERSIONS") + foreach (arg IN LISTS ARGN) + if (_state STREQUAL "name") + if (arg STREQUAL "VERSIONS") set(_state "versions") - elseif (${arg} STREQUAL "NAMES") + elseif (arg STREQUAL "NAMES") set(_state "names") - elseif (${arg} STREQUAL "PATHS") + elseif (arg STREQUAL "PATHS") set(_state "paths") - elseif (${arg} STREQUAL "DOC") + elseif (arg STREQUAL "DOC") set(_state "doc") else () set(_jar_names ${arg}) @@ -851,22 +856,22 @@ function (find_jar VARIABLE) set(_jar_doc "Finding ${arg} jar") endif () endif () - elseif (${_state} STREQUAL "versions") - if (${arg} STREQUAL "NAMES") + elseif (_state STREQUAL "versions") + if (arg STREQUAL "NAMES") set(_state "names") - elseif (${arg} STREQUAL "PATHS") + elseif (arg STREQUAL "PATHS") set(_state "paths") - elseif (${arg} STREQUAL "DOC") + elseif (arg STREQUAL "DOC") set(_state "doc") else () set(_jar_versions ${_jar_versions} ${arg}) endif () - elseif (${_state} STREQUAL "names") - if (${arg} STREQUAL "VERSIONS") + elseif (_state STREQUAL "names") + if (arg STREQUAL "VERSIONS") set(_state "versions") - elseif (${arg} STREQUAL "PATHS") + elseif (arg STREQUAL "PATHS") set(_state "paths") - elseif (${arg} STREQUAL "DOC") + elseif (arg STREQUAL "DOC") set(_state "doc") else () set(_jar_names ${_jar_names} ${arg}) @@ -874,22 +879,22 @@ function (find_jar VARIABLE) set(_jar_doc "Finding ${arg} jar") endif () endif () - elseif (${_state} STREQUAL "paths") - if (${arg} STREQUAL "VERSIONS") + elseif (_state STREQUAL "paths") + if (arg STREQUAL "VERSIONS") set(_state "versions") - elseif (${arg} STREQUAL "NAMES") + elseif (arg STREQUAL "NAMES") set(_state "names") - elseif (${arg} STREQUAL "DOC") + elseif (arg STREQUAL "DOC") set(_state "doc") else () set(_jar_paths ${_jar_paths} ${arg}) endif () - elseif (${_state} STREQUAL "doc") - if (${arg} STREQUAL "VERSIONS") + elseif (_state STREQUAL "doc") + if (arg STREQUAL "VERSIONS") set(_state "versions") - elseif (${arg} STREQUAL "NAMES") + elseif (arg STREQUAL "NAMES") set(_state "names") - elseif (${arg} STREQUAL "PATHS") + elseif (arg STREQUAL "PATHS") set(_state "paths") else () set(_jar_doc ${arg}) @@ -901,8 +906,8 @@ function (find_jar VARIABLE) message(FATAL_ERROR "find_jar: No name to search for given") endif () - foreach (jar_name ${_jar_names}) - foreach (version ${_jar_versions}) + foreach (jar_name IN LISTS _jar_names) + foreach (version IN LISTS _jar_versions) set(_jar_files ${_jar_files} ${jar_name}-${version}.jar) endforeach () set(_jar_files ${_jar_files} ${jar_name}.jar) @@ -930,301 +935,301 @@ function(create_javadoc _target) set(_state "package") - foreach (arg ${ARGN}) - if (${_state} STREQUAL "package") - if (${arg} STREQUAL "PACKAGES") + foreach (arg IN LISTS ARGN) + if (_state STREQUAL "package") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_packages ${arg}) set(_state "packages") endif () - elseif (${_state} STREQUAL "packages") - if (${arg} STREQUAL "FILES") + elseif (_state STREQUAL "packages") + if (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_packages ${arg}) + list (APPEND _javadoc_packages ${arg}) endif () - elseif (${_state} STREQUAL "files") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "files") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_files ${arg}) + list (APPEND _javadoc_files ${arg}) endif () - elseif (${_state} STREQUAL "sourcepath") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "sourcepath") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_sourcepath ${arg}) + list (APPEND _javadoc_sourcepath ${arg}) endif () - elseif (${_state} STREQUAL "classpath") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "classpath") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") - set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "SOURCEPATH") + set(_state "sourcepath") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_classpath ${arg}) + list (APPEND _javadoc_classpath ${arg}) endif () - elseif (${_state} STREQUAL "installpath") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "installpath") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_installpath ${arg}) endif () - elseif (${_state} STREQUAL "doctitle") + elseif (_state STREQUAL "doctitle") if (${arg} STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_doctitle ${arg}) endif () - elseif (${_state} STREQUAL "windowtitle") + elseif (_state STREQUAL "windowtitle") if (${arg} STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_windowtitle ${arg}) endif () - elseif (${_state} STREQUAL "author") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "author") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_author ${arg}) endif () - elseif (${_state} STREQUAL "use") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "use") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_use ${arg}) endif () - elseif (${_state} STREQUAL "version") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "version") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "OVERVIEW") + elseif (arg STREQUAL "OVERVIEW") set(_state "overview") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () set(_javadoc_version ${arg}) endif () - elseif (${_state} STREQUAL "overview") - if (${arg} STREQUAL "PACKAGES") + elseif (_state STREQUAL "overview") + if (arg STREQUAL "PACKAGES") set(_state "packages") - elseif (${arg} STREQUAL "FILES") + elseif (arg STREQUAL "FILES") set(_state "files") - elseif (${arg} STREQUAL "SOURCEPATH") + elseif (arg STREQUAL "SOURCEPATH") set(_state "sourcepath") - elseif (${arg} STREQUAL "CLASSPATH") + elseif (arg STREQUAL "CLASSPATH") set(_state "classpath") - elseif (${arg} STREQUAL "INSTALLPATH") + elseif (arg STREQUAL "INSTALLPATH") set(_state "installpath") - elseif (${arg} STREQUAL "DOCTITLE") + elseif (arg STREQUAL "DOCTITLE") set(_state "doctitle") - elseif (${arg} STREQUAL "WINDOWTITLE") + elseif (arg STREQUAL "WINDOWTITLE") set(_state "windowtitle") - elseif (${arg} STREQUAL "AUTHOR") + elseif (arg STREQUAL "AUTHOR") set(_state "author") - elseif (${arg} STREQUAL "USE") + elseif (arg STREQUAL "USE") set(_state "use") - elseif (${arg} STREQUAL "VERSION") + elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_overview ${arg}) + set(_javadoc_overview ${arg}) endif () endif () endforeach () @@ -1234,7 +1239,7 @@ function(create_javadoc _target) if (_javadoc_sourcepath) set(_start TRUE) - foreach(_path ${_javadoc_sourcepath}) + foreach(_path IN LISTS _javadoc_sourcepath) if (_start) set(_sourcepath ${_path}) set(_start FALSE) @@ -1247,7 +1252,7 @@ function(create_javadoc _target) if (_javadoc_overview) set(_start TRUE) - foreach(_path ${_javadoc_overview}) + foreach(_path IN LISTS _javadoc_overview) if (_start) set(_overview ${_path}) set(_start FALSE) @@ -1260,7 +1265,7 @@ function(create_javadoc _target) if (_javadoc_classpath) set(_start TRUE) - foreach(_path ${_javadoc_classpath}) + foreach(_path IN LISTS _javadoc_classpath) if (_start) set(_classpath ${_path}) set(_start FALSE) @@ -1305,6 +1310,12 @@ function(create_javadoc _target) endfunction() function (create_javah) + if (Java_VERSION VERSION_GREATER_EQUAL 10) + message (FATAL_ERROR "create_javah: not supported with this Java version. Use add_jar(GENERATE_NATIVE_HEADERS) instead.") + elseif (Java_VERSION VERSION_GREATER_EQUAL 1.8) + message (DEPRECATION "create_javah: this command will no longer be supported starting with version 10 of JDK. Update your project by using command add_jar(GENERATE_NATIVE_HEADERS) instead.") + endif() + cmake_parse_arguments(_create_javah "" "TARGET;GENERATED_FILES;OUTPUT_NAME;OUTPUT_DIR" @@ -1421,7 +1432,7 @@ function(export_jars) # Set content of generated exports file string(REPLACE ";" " " __targets__ "${_export_jars_TARGETS}") set(__targetdefs__ "") - foreach(_target ${_export_jars_TARGETS}) + foreach(_target IN LISTS _export_jars_TARGETS) get_target_property(_jarpath ${_target} JAR_FILE) get_filename_component(_jarpath ${_jarpath} PATH) __java_export_jar(__targetdefs__ ${_target} "${_jarpath}") @@ -1459,7 +1470,7 @@ function(install_jar_exports) endif() # Determine relative path from installed export file to install prefix - if(IS_ABSOLUTE ${_install_jar_exports_DESTINATION}) + if(IS_ABSOLUTE "${_install_jar_exports_DESTINATION}") file(RELATIVE_PATH _relpath ${_install_jar_exports_DESTINATION} ${CMAKE_INSTALL_PREFIX} @@ -1478,7 +1489,7 @@ function(install_jar_exports) # Set content of generated exports file string(REPLACE ";" " " __targets__ "${_install_jar_exports_TARGETS}") set(__targetdefs__ "set(_prefix \${CMAKE_CURRENT_LIST_DIR}/${_relpath})\n\n") - foreach(_target ${_install_jar_exports_TARGETS}) + foreach(_target IN LISTS _install_jar_exports_TARGETS) get_target_property(_dir ${_target} INSTALL_DESTINATION) __java_export_jar(__targetdefs__ ${_target} "\${_prefix}/${_dir}") endforeach() diff --git a/config/cmake/UseJavaClassFilelist.cmake b/config/cmake/UseJavaClassFilelist.cmake index 4420550..8348e4c 100644 --- a/config/cmake/UseJavaClassFilelist.cmake +++ b/config/cmake/UseJavaClassFilelist.cmake @@ -1,16 +1,17 @@ # Distributed under the OSI-approved BSD 3-Clause License. See https://cmake.org/licensing for details. -#.rst: -# UseJavaClassFilelist -# -------------------- -# -# -# -# -# -# This script create a list of compiled Java class files to be added to -# a jar file. This avoids including cmake files which get created in -# the binary directory. +#[=======================================================================[.rst: +UseJavaClassFilelist +-------------------- + + + + + +This script create a list of compiled Java class files to be added to +a jar file. This avoids including cmake files which get created in +the binary directory. +#]=======================================================================] if (CMAKE_JAVA_CLASS_OUTPUT_PATH) if (EXISTS "${CMAKE_JAVA_CLASS_OUTPUT_PATH}") @@ -22,7 +23,7 @@ if (CMAKE_JAVA_CLASS_OUTPUT_PATH) file(GLOB_RECURSE _JAVA_GLOBBED_TMP_FILES "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${JAR_CLASS_PREFIX}/*.class") if (_JAVA_GLOBBED_TMP_FILES) - list(APPEND _JAVA_GLOBBED_FILES ${_JAVA_GLOBBED_TMP_FILES}) + list (APPEND _JAVA_GLOBBED_FILES ${_JAVA_GLOBBED_TMP_FILES}) endif () endforeach() else() diff --git a/config/cmake/UseJavaSymlinks.cmake b/config/cmake/UseJavaSymlinks.cmake index cd73348..a4db5c1 100644 --- a/config/cmake/UseJavaSymlinks.cmake +++ b/config/cmake/UseJavaSymlinks.cmake @@ -1,14 +1,15 @@ # Distributed under the OSI-approved BSD 3-Clause License. See https://cmake.org/licensing for details. -#.rst: -# UseJavaSymlinks -# --------------- -# -# -# -# -# -# Helper script for UseJava.cmake +#[=======================================================================[.rst: +UseJavaSymlinks +--------------- + + + + + +Helper script for UseJava.cmake +#]=======================================================================] if (UNIX AND _JAVA_TARGET_OUTPUT_LINK) if (_JAVA_TARGET_OUTPUT_NAME) diff --git a/config/cmake/UserMacros/Windows_MT.cmake b/config/cmake/UserMacros/Windows_MT.cmake index b6cc513..78d8277 100644 --- a/config/cmake/UserMacros/Windows_MT.cmake +++ b/config/cmake/UserMacros/Windows_MT.cmake @@ -14,7 +14,8 @@ ######################################################## # To use this option, copy both the macro and option code -# into the root UserMacros.cmake file. +# into the root UserMacros.cmake file. Then enable the option, +# using the command line add "-DBUILD_STATIC_CRT_LIBS:BOOL=ON" # OR add an include to the root UserMacros.cmake file: # INCLUDE(path_to_file/WINDOWS_MT.cmake) diff --git a/config/cmake/cacheinit.cmake b/config/cmake/cacheinit.cmake index 6a66c8a..4846997 100644 --- a/config/cmake/cacheinit.cmake +++ b/config/cmake/cacheinit.cmake @@ -19,9 +19,11 @@ set (CMAKE_INSTALL_FRAMEWORK_PREFIX "Library/Frameworks" CACHE STRING "Framework set (HDF_PACKAGE_EXT "" CACHE STRING "Name of HDF package extension" FORCE) +set (HDF_PACKAGE_NAMESPACE "hdf5::" CACHE STRING "Name for HDF package namespace (can be empty)" FORCE) + set (HDF5_BUILD_FORTRAN ON CACHE BOOL "Build FORTRAN support" FORCE) -set (HDF5_BUILD_GENERATORS OFF CACHE BOOL "Build Test Generators" FORCE) +set (HDF5_BUILD_GENERATORS ON CACHE BOOL "Build Test Generators" FORCE) set (HDF5_ENABLE_Z_LIB_SUPPORT ON CACHE BOOL "Enable Zlib Filters" FORCE) @@ -29,51 +31,21 @@ set (HDF5_ENABLE_SZIP_SUPPORT ON CACHE BOOL "Use SZip Filter" FORCE) set (HDF5_ENABLE_SZIP_ENCODING ON CACHE BOOL "Use SZip Encoding" FORCE) -set (HDF5_ENABLE_HSIZET ON CACHE BOOL "Enable datasets larger than memory" FORCE) - -set (ALLOW_UNSUPPORTED OFF CACHE BOOL "Enable unsupported combinations of configuration options" FORCE) - -set (HDF5_ENABLE_DEPRECATED_SYMBOLS ON CACHE BOOL "Enable deprecated public API symbols" FORCE) - -set (HDF5_ENABLE_DIRECT_VFD OFF CACHE BOOL "Build the Direct I/O Virtual File Driver" FORCE) - -set (HDF5_ENABLE_PARALLEL OFF CACHE BOOL "Enable parallel build (requires MPI)" FORCE) - -set (MPIEXEC_MAX_NUMPROCS "3" CACHE STRING "Minimum number of processes for HDF parallel tests" FORCE) - -set (HDF5_BUILD_PARALLEL_ALL OFF CACHE BOOL "Build Parallel Programs" FORCE) - -set (HDF5_ENABLE_COVERAGE OFF CACHE BOOL "Enable code coverage for Libraries and Programs" FORCE) - -set (HDF5_ENABLE_USING_MEMCHECKER OFF CACHE BOOL "Indicate that a memory checker is used" FORCE) - -set (HDF5_MEMORY_ALLOC_SANITY_CHECK OFF CACHE BOOL "Indicate that internal memory allocation sanity checks are enabled" FORCE) - -set (HDF5_DISABLE_COMPILER_WARNINGS OFF CACHE BOOL "Disable compiler warnings" FORCE) +set (MPIEXEC_MAX_NUMPROCS "4" CACHE STRING "Minimum number of processes for HDF parallel tests" FORCE) set (HDF5_ENABLE_ALL_WARNINGS ON CACHE BOOL "Enable all warnings" FORCE) -set (HDF5_USE_FOLDERS ON CACHE BOOL "Enable folder grouping of projects in IDEs." FORCE) - -set (HDF5_USE_16_API_DEFAULT OFF CACHE BOOL "Use the HDF5 1.6.x API by default" FORCE) - -set (HDF5_USE_18_API_DEFAULT OFF CACHE BOOL "Use the HDF5 1.8.x API by default" FORCE) - -set (HDF5_ENABLE_THREADSAFE OFF CACHE BOOL "(WINDOWS)Enable Threadsafety" FORCE) - set (HDF_TEST_EXPRESS "2" CACHE STRING "Control testing framework (0-3)" FORCE) -set (HDF5_PACKAGE_EXTLIBS OFF CACHE BOOL "(WINDOWS)CPACK - include external libraries" FORCE) - -set (HDF5_NO_PACKAGES OFF CACHE BOOL "CPACK - Disable packaging" FORCE) - -set (HDF5_ALLOW_EXTERNAL_SUPPORT "NO" CACHE STRING "Allow External Library Building (NO GIT SVN TGZ)" FORCE) -set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT SVN TGZ) +set (HDF5_ALLOW_EXTERNAL_SUPPORT "NO" CACHE STRING "Allow External Library Building (NO GIT TGZ)" FORCE) +set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT TGZ) set (ZLIB_TGZ_NAME "ZLib.tar.gz" CACHE STRING "Use ZLib from compressed file" FORCE) set (SZIP_TGZ_NAME "SZip.tar.gz" CACHE STRING "Use SZip from compressed file" FORCE) +set (SZAEC_TGZ_NAME "LIBAEC.tar.gz" CACHE STRING "Use SZip AEC from compressed file" FORCE) +set (USE_LIBAEC ON CACHE BOOL "Use libaec szip replacement" FORCE) set (ZLIB_PACKAGE_NAME "zlib" CACHE STRING "Name of ZLIB package" FORCE) - +set (LIBAEC_PACKAGE_NAME "libaec" CACHE STRING "Name of AEC SZIP package" FORCE) set (SZIP_PACKAGE_NAME "szip" CACHE STRING "Name of SZIP package" FORCE) diff --git a/config/cmake/fileCompareTest.cmake b/config/cmake/fileCompareTest.cmake new file mode 100644 index 0000000..d913da0 --- /dev/null +++ b/config/cmake/fileCompareTest.cmake @@ -0,0 +1,104 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# fileCompareTest.cmake compares two files. + +# arguments checking +if (NOT TEST_FOLDER) + message (FATAL_ERROR "Require TEST_FOLDER to be defined") +endif () +if (NOT TEST_ONEFILE) + message (FATAL_ERROR "Require TEST_ONEFILE the first file to be defined") +endif () +if (NOT TEST_TWOFILE) + message (FATAL_ERROR "Require TEST_TWOFILE the second file to be defined") +endif () +if (NOT TEST_FUNCTION) + message (FATAL_ERROR "Require TEST_FUNCTION (LT,LTEQ,EQ,GTEQ,GT) to be defined") +endif () +#if (NOT TEST_EXPECT) +# message (STATUS "Require TEST_EXPECT to be defined") +#endif () + +set (TEST_ONE_SIZE 0) +set (TEST_TWO_SIZE 0) +set (TEST_ONE_STRING 0) +set (TEST_TWO_STRING 0) +set (TEST_ONE_STRING_LEN 0) +set (TEST_TWO_STRING_LEN 0) + +if (TEST_STRINGS STREQUAL "YES") + # find the length of the first file + #s1=`cat $ufile | wc -c | sed -e 's/ //g'` + file (STRINGS ${TEST_FOLDER}/${TEST_ONEFILE} TEST_ONE_STRING) + string (LENGTH ${TEST_ONE_STRING} TEST_ONE_STRING_LEN) + + # Get the size of the second file. + file (STRINGS ${TEST_FOLDER}/${TEST_TWOFILE} TEST_TWO_STRING) + string (LENGTH ${TEST_TWO_STRING} TEST_TWO_STRING_LEN) + + math (EXPR TEST_STRING_SIZE "${TEST_ONE_STRING_LEN} - ${TEST_TWO_STRING_LEN}" ) + + # now compare the outputs + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_ONEFILE} ${TEST_FOLDER}/${TEST_TWOFILE} + RESULT_VARIABLE TEST_RESULT + ) + + message (STATUS "COMPARE Result: ${TEST_RESULT}: ${TEST_STRING_SIZE}=${TEST_U_STRING_LEN}-${TEST_O_STRING_LEN}") + # if the return value is !=${TEST_EXPECT} bail out + if (NOT TEST_RESULT EQUAL TEST_EXPECT) + message (FATAL_ERROR "Failed: The output of ${TEST_FOLDER}/${TEST_ONEFILE} did not match ${TEST_FOLDER}/${TEST_TWOFILE}.\n${TEST_ERROR}") + endif () +else () + if (CMAKE_VERSION VERSION_LESS "3.14.0") + message (FATAL_ERROR "CANNOT get file size, file command SIZE not supported") + else () + file (SIZE ${TEST_FOLDER}/${TEST_ONEFILE} TEST_ONE_SIZE) + file (SIZE ${TEST_FOLDER}/${TEST_TWOFILE} TEST_TWO_SIZE) + if (TEST_FUNCTION MATCHES "LT") + if (TEST_ONE_SIZE LESS TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was less ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT less ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "LTEQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was less or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT less or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "EQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "GTEQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was greater or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT greater or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "GT") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was greater ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT greater ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + else () + message (FATAL_ERROR "Failed: Incorrect test size compare command provided.\n${TEST_ERROR}") + endif () + endif () +endif () + +# everything went fine... + diff --git a/config/cmake/hdf5-config-version.cmake.in b/config/cmake/hdf5-config-version.cmake.in index 8e16725..575c1ab 100644 --- a/config/cmake/hdf5-config-version.cmake.in +++ b/config/cmake/hdf5-config-version.cmake.in @@ -21,38 +21,38 @@ set (PACKAGE_VERSION "@HDF5_VERSION_STRING@") -if("${PACKAGE_VERSION}" VERSION_LESS "${PACKAGE_FIND_VERSION}" ) +if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION) set(PACKAGE_VERSION_COMPATIBLE FALSE) -else () - if ("${PACKAGE_FIND_VERSION_MAJOR}" STREQUAL "@H5_VERS_MAJOR@") +else() + if("@H5_VERS_MAJOR@.@H5_VERS_MINOR@" MATCHES "^([0-9]+)\\.([0-9]+)") + set(CVF_VERSION_MAJOR "${CMAKE_MATCH_1}") + set(CVF_VERSION_MINOR "${CMAKE_MATCH_2}") + else() + set(CVF_VERSION_MAJOR "@HDF5_VERSION_STRING@") + set(CVF_VERSION_MINOR "") + endif() + + if((PACKAGE_FIND_VERSION_MAJOR STREQUAL CVF_VERSION_MAJOR) AND + (PACKAGE_FIND_VERSION_MINOR STREQUAL CVF_VERSION_MINOR)) + set(PACKAGE_VERSION_COMPATIBLE TRUE) + else() + set(PACKAGE_VERSION_COMPATIBLE FALSE) + endif() + + if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION) + set(PACKAGE_VERSION_EXACT TRUE) + endif() +endif() - # exact match for version @H5_VERS_MAJOR@.@H5_VERS_MINOR@ - if ("${PACKAGE_FIND_VERSION_MINOR}" STREQUAL "@H5_VERS_MINOR@") - - # compatible with any version @H5_VERS_MAJOR@.@H5_VERS_MINOR@.x - set (PACKAGE_VERSION_COMPATIBLE TRUE) - - if ("${PACKAGE_FIND_VERSION_PATCH}" STREQUAL "@H5_VERS_RELEASE@") - set (PACKAGE_VERSION_EXACT TRUE) - - if ("${PACKAGE_FIND_VERSION_TWEAK}" STREQUAL "@H5_VERS_SUBRELEASE@") - # not using this yet - endif () - endif () - else () - set (PACKAGE_VERSION_COMPATIBLE FALSE) - endif () - endif () -endif () # if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it: -if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "") +if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "") return() -endif () +endif() # check that the installed version has the same 32/64bit-ness as the one which is currently searching: -if(NOT "${CMAKE_SIZEOF_VOID_P}" STREQUAL "@CMAKE_SIZEOF_VOID_P@") +if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "@CMAKE_SIZEOF_VOID_P@") math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8") set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)") set(PACKAGE_VERSION_UNSUITABLE TRUE) -endif () +endif() diff --git a/config/cmake/hdf5-config.cmake.in b/config/cmake/hdf5-config.cmake.in index 904c083..a0e93df 100644 --- a/config/cmake/hdf5-config.cmake.in +++ b/config/cmake/hdf5-config.cmake.in @@ -38,27 +38,36 @@ set (${HDF5_PACKAGE_NAME}_BUILD_CPP_LIB @HDF5_BUILD_CPP_LIB@) set (${HDF5_PACKAGE_NAME}_BUILD_JAVA @HDF5_BUILD_JAVA@) set (${HDF5_PACKAGE_NAME}_BUILD_TOOLS @HDF5_BUILD_TOOLS@) set (${HDF5_PACKAGE_NAME}_BUILD_HL_LIB @HDF5_BUILD_HL_LIB@) +set (${HDF5_PACKAGE_NAME}_ENABLE_THREADSAFE @HDF5_ENABLE_THREADSAFE@) set (${HDF5_PACKAGE_NAME}_ENABLE_Z_LIB_SUPPORT @HDF5_ENABLE_Z_LIB_SUPPORT@) set (${HDF5_PACKAGE_NAME}_ENABLE_SZIP_SUPPORT @HDF5_ENABLE_SZIP_SUPPORT@) set (${HDF5_PACKAGE_NAME}_ENABLE_SZIP_ENCODING @HDF5_ENABLE_SZIP_ENCODING@) -set (${HDF5_PACKAGE_NAME}_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@) +set (${HDF5_PACKAGE_NAME}_BUILD_SHARED_LIBS @H5_ENABLE_SHARED_LIB@) +set (${HDF5_PACKAGE_NAME}_BUILD_STATIC_LIBS @H5_ENABLE_STATIC_LIB@) set (${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS @HDF5_PACKAGE_EXTLIBS@) set (${HDF5_PACKAGE_NAME}_EXPORT_LIBRARIES @HDF5_LIBRARIES_TO_EXPORT@) +set (${HDF5_PACKAGE_NAME}_ARCHITECTURE "@CMAKE_GENERATOR_ARCHITECTURE@") set (${HDF5_PACKAGE_NAME}_TOOLSET "@CMAKE_GENERATOR_TOOLSET@") +set (${HDF5_PACKAGE_NAME}_DEFAULT_API_VERSION "@DEFAULT_API_VERSION@") +set (${HDF5_PACKAGE_NAME}_PARALLEL_FILTERED_WRITES "@PARALLEL_FILTERED_WRITES@") #----------------------------------------------------------------------------- # Dependencies #----------------------------------------------------------------------------- if (${HDF5_PACKAGE_NAME}_ENABLE_PARALLEL) - set (${HDF5_PACKAGE_NAME}_MPI_C_INCLUDE_PATH "@MPI_C_INCLUDE_PATH@") + set (${HDF5_PACKAGE_NAME}_MPI_C_INCLUDE_PATH "@MPI_C_INCLUDE_DIRS@") set (${HDF5_PACKAGE_NAME}_MPI_C_LIBRARIES "@MPI_C_LIBRARIES@") + if (${HDF5_PACKAGE_NAME}_BUILD_FORTRAN) + set (${HDF5_PACKAGE_NAME}_MPI_Fortran_INCLUDE_PATH "@MPI_Fortran_INCLUDE_DIRS@") + set (${HDF5_PACKAGE_NAME}_MPI_Fortran_LIBRARIES "@MPI_Fortran_LIBRARIES@") + endif () endif () if (${HDF5_PACKAGE_NAME}_BUILD_JAVA) set (${HDF5_PACKAGE_NAME}_JAVA_INCLUDE_DIRS @PACKAGE_CURRENT_BUILD_DIR@/lib/jarhdf5-@HDF5_VERSION_STRING@.jar - @PACKAGE_CURRENT_BUILD_DIR@/lib/slf4j-api-1.7.5.jar - @PACKAGE_CURRENT_BUILD_DIR@/lib/slf4j-nop-1.7.5.jar + @PACKAGE_CURRENT_BUILD_DIR@/lib/slf4j-api-1.7.25.jar + @PACKAGE_CURRENT_BUILD_DIR@/lib/slf4j-nop-1.7.25.jar ) set (${HDF5_PACKAGE_NAME}_JAVA_LIBRARY "@PACKAGE_CURRENT_BUILD_DIR@/lib") set (${HDF5_PACKAGE_NAME}_JAVA_LIBRARIES "${${HDF5_PACKAGE_NAME}_JAVA_LIBRARY}") @@ -67,7 +76,7 @@ endif () #----------------------------------------------------------------------------- # Directories #----------------------------------------------------------------------------- -set (${HDF5_PACKAGE_NAME}_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@" "${${HDF5_PACKAGE_NAME}_MPI_C_INCLUDE_PATH}") +set (${HDF5_PACKAGE_NAME}_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@" "${${HDF5_PACKAGE_NAME}_MPI_C_INCLUDE_DIRS}") set (${HDF5_PACKAGE_NAME}_SHARE_DIR "@PACKAGE_SHARE_INSTALL_DIR@") set_and_check (${HDF5_PACKAGE_NAME}_BUILD_DIR "@PACKAGE_CURRENT_BUILD_DIR@") @@ -92,42 +101,48 @@ endif () #----------------------------------------------------------------------------- # Version Strings #----------------------------------------------------------------------------- -set (HDF5_VERSION_STRING @HDF5_VERSION_STRING@) -set (HDF5_VERSION_MAJOR @HDF5_VERSION_MAJOR@) -set (HDF5_VERSION_MINOR @HDF5_VERSION_MINOR@) +set (${HDF5_PACKAGE_NAME}_VERSION_STRING @HDF5_VERSION_STRING@) +set (${HDF5_PACKAGE_NAME}_VERSION_MAJOR @HDF5_VERSION_MAJOR@) +set (${HDF5_PACKAGE_NAME}_VERSION_MINOR @HDF5_VERSION_MINOR@) #----------------------------------------------------------------------------- # Don't include targets if this file is being picked up by another # project which has already built hdf5 as a subproject #----------------------------------------------------------------------------- if (NOT TARGET "@HDF5_PACKAGE@") - if (${HDF5_PACKAGE_NAME}_ENABLE_Z_LIB_SUPPORT AND ${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS AND NOT TARGET "zlib") - include (@PACKAGE_SHARE_INSTALL_DIR@/@ZLIB_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) + if (${HDF5_PACKAGE_NAME}_ENABLE_Z_LIB_SUPPORT AND ${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS) + include (@PACKAGE_SHARE_INSTALL_DIR@/@ZLIB_PACKAGE_NAME@/@ZLIB_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif () - if (${HDF5_PACKAGE_NAME}_ENABLE_SZIP_SUPPORT AND ${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS AND NOT TARGET "szip") - include (@PACKAGE_SHARE_INSTALL_DIR@/@SZIP_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) + if (${HDF5_PACKAGE_NAME}_ENABLE_SZIP_SUPPORT AND ${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS) + include (@PACKAGE_SHARE_INSTALL_DIR@/@SZ_PACKAGE_NAME@/@SZ_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif () - include (@PACKAGE_SHARE_INSTALL_DIR@/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) + include (@PACKAGE_SHARE_INSTALL_DIR@/@HDF5_PACKAGE@/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) endif () # Handle default component(static) : if (NOT ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS) + if (${HDF5_PACKAGE_NAME}_BUILD_STATIC_LIBS) set (${HDF5_PACKAGE_NAME}_LIB_TYPE) set (${HDF5_PACKAGE_NAME}_FIND_COMPONENTS C HL static) set (${HDF5_PACKAGE_NAME}_FIND_REQUIRED_static_C true) + else () + set (${HDF5_PACKAGE_NAME}_LIB_TYPE) + set (${HDF5_PACKAGE_NAME}_FIND_COMPONENTS C HL shared) + set (${HDF5_PACKAGE_NAME}_FIND_REQUIRED_shared_C true) + endif () endif () # Handle requested components: list (REMOVE_DUPLICATES ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS) foreach (comp IN LISTS ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS) - if (${comp} STREQUAL "shared") + if (comp STREQUAL "shared") list (REMOVE_ITEM ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS ${comp}) set (${HDF5_PACKAGE_NAME}_LIB_TYPE ${${HDF5_PACKAGE_NAME}_LIB_TYPE} ${comp}) if (${HDF5_PACKAGE_NAME}_BUILD_FORTRAN) set (${HDF5_PACKAGE_NAME}_INCLUDE_DIR_FORTRAN "@PACKAGE_INCLUDE_INSTALL_DIR@/shared") endif () - elseif (${comp} STREQUAL "static") + elseif (comp STREQUAL "static") list (REMOVE_ITEM ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS ${comp}) set (${HDF5_PACKAGE_NAME}_LIB_TYPE ${${HDF5_PACKAGE_NAME}_LIB_TYPE} ${comp}) @@ -139,28 +154,36 @@ endforeach () foreach (libtype IN LISTS ${HDF5_PACKAGE_NAME}_LIB_TYPE) foreach (comp IN LISTS ${HDF5_PACKAGE_NAME}_FIND_COMPONENTS) set (hdf5_comp2) - if (${comp} STREQUAL "C") + if (comp STREQUAL "C") set (hdf5_comp "hdf5") - elseif (${comp} STREQUAL "CXX") + elseif (comp STREQUAL "CXX") set (hdf5_comp "hdf5_cpp") - elseif (${comp} STREQUAL "HL") + elseif (comp STREQUAL "HL") set (hdf5_comp "hdf5_hl") - elseif (${comp} STREQUAL "CXX_HL") + elseif (comp STREQUAL "CXX_HL") set (hdf5_comp "hdf5_hl_cpp") - elseif (${comp} STREQUAL "Java") + elseif (comp STREQUAL "Java") set (hdf5_comp "hdf5_java") - elseif (${comp} STREQUAL "Tools") + elseif (comp STREQUAL "Tools") set (hdf5_comp "hdf5_tools") - elseif (${comp} STREQUAL "Fortran") + elseif (comp STREQUAL "Fortran") set (hdf5_comp2 "hdf5_f90cstub") set (hdf5_comp "hdf5_fortran") - elseif (${comp} STREQUAL "Fortran_HL") + elseif (comp STREQUAL "Fortran_HL") set (hdf5_comp2 "hdf5_hl_f90cstub") set (hdf5_comp "hdf5_hl_fortran") endif () - list (FIND ${HDF5_PACKAGE_NAME}_EXPORT_LIBRARIES "${hdf5_comp}-${libtype}" HAVE_COMP) + if (comp STREQUAL "Java") + list (FIND ${HDF5_PACKAGE_NAME}_EXPORT_LIBRARIES "${hdf5_comp}" HAVE_COMP) + else () + list (FIND ${HDF5_PACKAGE_NAME}_EXPORT_LIBRARIES "${hdf5_comp}-${libtype}" HAVE_COMP) + endif () if (${HAVE_COMP} LESS 0) - set (${HDF5_PACKAGE_NAME}_${libtype}_${comp}_FOUND 0) + if (comp STREQUAL "Java") + set (${HDF5_PACKAGE_NAME}_${comp}_FOUND 0) + else () + set (${HDF5_PACKAGE_NAME}_${libtype}_${comp}_FOUND 0) + endif () else () if (hdf5_comp2) list (FIND ${HDF5_PACKAGE_NAME}_EXPORT_LIBRARIES "${hdf5_comp2}-${libtype}" HAVE_COMP2) @@ -169,12 +192,16 @@ foreach (libtype IN LISTS ${HDF5_PACKAGE_NAME}_LIB_TYPE) else () set (${HDF5_PACKAGE_NAME}_${libtype}_${comp}_FOUND 1) string(TOUPPER ${HDF5_PACKAGE_NAME}_${comp}_${libtype}_LIBRARY COMP_LIBRARY) - set (${COMP_LIBRARY} ${${COMP_LIBRARY}} @HDF5_PACKAGE@::${hdf5_comp2}-${libtype} @HDF5_PACKAGE@::${hdf5_comp}-${libtype}) + set (${COMP_LIBRARY} ${${COMP_LIBRARY}} @HDF_PACKAGE_NAMESPACE@${hdf5_comp2}-${libtype} @HDF_PACKAGE_NAMESPACE@${hdf5_comp}-${libtype}) endif () + elseif (comp STREQUAL "Java") + set (${HDF5_PACKAGE_NAME}_${comp}_FOUND 1) + string(TOUPPER ${HDF5_PACKAGE_NAME}_${comp}_LIBRARY COMP_LIBRARY) + set (${COMP_LIBRARY} ${${COMP_LIBRARY}} @HDF_PACKAGE_NAMESPACE@${hdf5_comp}) else () set (${HDF5_PACKAGE_NAME}_${libtype}_${comp}_FOUND 1) string(TOUPPER ${HDF5_PACKAGE_NAME}_${comp}_${libtype}_LIBRARY COMP_LIBRARY) - set (${COMP_LIBRARY} ${${COMP_LIBRARY}} @HDF5_PACKAGE@::${hdf5_comp}-${libtype}) + set (${COMP_LIBRARY} ${${COMP_LIBRARY}} @HDF_PACKAGE_NAMESPACE@${hdf5_comp}-${libtype}) endif () endif () endforeach () diff --git a/config/cmake/jrunTest.cmake b/config/cmake/jrunTest.cmake index 7af0590..41570eb 100644 --- a/config/cmake/jrunTest.cmake +++ b/config/cmake/jrunTest.cmake @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -# runTest.cmake executes a command and captures the output in a file. File is then compared +# jrunTest.cmake executes a command and captures the output in a file. File is then compared # against a reference file. Exit status of command can also be compared. cmake_policy(SET CMP0007 NEW) @@ -24,7 +24,7 @@ if (NOT TEST_LIBRARY_DIRECTORY) message (STATUS "Require TEST_LIBRARY_DIRECTORY to be defined") endif () if (NOT TEST_FOLDER) - message ( FATAL_ERROR "Require TEST_FOLDER to be defined") + message (FATAL_ERROR "Require TEST_FOLDER to be defined") endif () if (NOT TEST_OUTPUT) message (FATAL_ERROR "Require TEST_OUTPUT to be defined") @@ -32,26 +32,15 @@ endif () if (NOT TEST_CLASSPATH) message (STATUS "Require TEST_CLASSPATH to be defined") endif () -if (NOT TEST_REFERENCE) - message (FATAL_ERROR "Require TEST_REFERENCE to be defined") -endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) endif () -# if there is not an error reference file add the error output to the stdout file -if (NOT TEST_ERRREF) - if (NOT SKIP_APPEND) - # append error file since skip was not defined - set (ERROR_APPEND 1) - endif () -endif () - if (NOT TEST_LOG_LEVEL) set (LOG_LEVEL "info") else () @@ -60,8 +49,10 @@ endif () message (STATUS "COMMAND: ${TEST_TESTER} -Xmx1024M -Dorg.slf4j.simpleLogger.defaultLog=${LOG_LEVEL} -Djava.library.path=\"${TEST_LIBRARY_DIRECTORY}\" -cp \"${TEST_CLASSPATH}\" ${TEST_ARGS} ${TEST_PROGRAM} ${ARGN}") -if (WIN32 AND NOT MINGW) +if (WIN32 OR MINGW) set (ENV{PATH} "$ENV{PATH}\\;${TEST_LIBRARY_DIRECTORY}") +else () + set (ENV{LD_LIBRARY_PATH} "$ENV{LD_LIBRARY_PATH}:${TEST_LIBRARY_DIRECTORY}") endif () # run the test program, capture the stdout/stderr and the result var @@ -75,24 +66,28 @@ execute_process ( RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_OUTPUT} ERROR_FILE ${TEST_OUTPUT}.err + OUTPUT_VARIABLE TEST_OUT ERROR_VARIABLE TEST_ERROR ) message (STATUS "COMMAND Result: ${TEST_RESULT}") # if the .err file exists and ERRROR_APPEND is enabled -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) - if (TEST_MASK_FILE) - STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") - endif () + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () - if (NOT ERROR_APPEND) - # append error output to the stdout output file - file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") - else () - # write back to original .err file - file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () endif () endif () @@ -121,8 +116,8 @@ if (TEST_MASK_ERROR) endif () endif () -# if the return value is !=0 bail out -if (NOT ${TEST_RESULT} STREQUAL ${TEST_EXPECT}) +# if the return value is !=expected bail out +if (NOT TEST_RESULT EQUAL TEST_EXPECT) message (STATUS "ERROR OUTPUT: ${TEST_STREAM}") message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != 0.\n${TEST_ERROR}") endif () @@ -130,129 +125,174 @@ endif () message (STATUS "COMMAND Error: ${TEST_ERROR}") # compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) if (NOT TEST_SKIP_COMPARE) - if (WIN32 AND NOT MINGW) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") - endif () + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") + endif () - # now compare the output with the reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} - RESULT_VARIABLE TEST_RESULT - ) - if (NOT ${TEST_RESULT} STREQUAL 0) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) - list (LENGTH test_ref len_ref) - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") - math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") - set (TEST_RESULT 1) - message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") - endif () + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) endif () - endforeach () - else () - if (${len_act} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if (${len_ref} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) + endif () endif () endif () - if (NOT ${len_act} STREQUAL ${len_ref}) - set (TEST_RESULT 1) - endif () - endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") - # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) - message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + # again, if return value is !=0 scream and shout + if (TEST_COMPARE_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + endif () endif () # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) if (TEST_ERRREF) - if (WIN32 AND NOT MINGW) - file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) - file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") - endif () + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") + endif () - # now compare the error output with the error reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} - RESULT_VARIABLE TEST_RESULT - ) - if (NOT ${TEST_RESULT} STREQUAL 0) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) - list (LENGTH test_ref len_ref) - math (EXPR _FP_LEN "${len_ref} - 1") - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") - set (TEST_RESULT 1) - message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () - endforeach () - else () - if (${len_act} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if (${len_ref} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) endif () - endif() - if (NOT ${len_act} STREQUAL ${len_ref}) - set (TEST_RESULT 1) endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) + if (TEST_ERRREF_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () endif () +set (TEST_GREP_RESULT 0) if (TEST_GREP_COMPARE) # now grep the output with the reference file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () - # TEST_REFERENCE should always be matched - string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) - string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if (${TEST_RESULT} STREQUAL "0") - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () + endif () endif () +endif () - string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) - if (${TEST_EXPECT} STREQUAL "1") - # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match - string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT ${TEST_RESULT} STREQUAL "0") - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") - endif () +# dump the output unless nodisplay option is set +if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY) + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + execute_process ( + COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM} + RESULT_VARIABLE TEST_RESULT + ) endif () endif () # everything went fine... -message ("${TEST_PROGRAM} Passed") +message (STATUS "${TEST_PROGRAM} Passed") diff --git a/config/cmake/jvolTest.cmake b/config/cmake/jvolTest.cmake new file mode 100644 index 0000000..3a3877b --- /dev/null +++ b/config/cmake/jvolTest.cmake @@ -0,0 +1,301 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# jrunTest.cmake executes a command and captures the output in a file. File is then compared +# against a reference file. Exit status of command can also be compared. +cmake_policy(SET CMP0007 NEW) + +# arguments checking +if (NOT TEST_TESTER) + message (FATAL_ERROR "Require TEST_TESTER to be defined") +endif () +if (NOT TEST_PROGRAM) + message (FATAL_ERROR "Require TEST_PROGRAM to be defined") +endif () +if (NOT TEST_LIBRARY_DIRECTORY) + message (STATUS "Require TEST_LIBRARY_DIRECTORY to be defined") +endif () +if (NOT TEST_FOLDER) + message (FATAL_ERROR "Require TEST_FOLDER to be defined") +endif () +if (NOT TEST_OUTPUT) + message (FATAL_ERROR "Require TEST_OUTPUT to be defined") +endif () +if (NOT TEST_CLASSPATH) + message (STATUS "Require TEST_CLASSPATH to be defined") +endif () +if (NOT TEST_VOL) + message (FATAL_ERROR "Require TEST_VOL to be defined") +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) +endif () + +if (NOT TEST_LOG_LEVEL) + set (LOG_LEVEL "info") +else () + set (LOG_LEVEL "${TEST_LOG_LEVEL}") +endif () + +message (STATUS "USING ${TEST_VOL} ON COMMAND: ${TEST_TESTER} -Xmx1024M -Dorg.slf4j.simpleLogger.defaultLog=${LOG_LEVEL} -Djava.library.path=\"${TEST_LIBRARY_DIRECTORY}\" -cp \"${TEST_CLASSPATH}\" ${TEST_ARGS} ${TEST_PROGRAM} ${ARGN}") + +set (ENV{HDF5_VOL_CONNECTOR} "${TEST_VOL}") + +if (WIN32 OR MINGW) + set (ENV{PATH} "$ENV{PATH}\\;${TEST_LIBRARY_DIRECTORY}") +else () + set (ENV{LD_LIBRARY_PATH} "$ENV{LD_LIBRARY_PATH}:${TEST_LIBRARY_DIRECTORY}") +endif () + +# run the test program, capture the stdout/stderr and the result var +execute_process ( + COMMAND ${TEST_TESTER} -Xmx1024M + -Dorg.slf4j.simpleLogger.defaultLogLevel=${LOG_LEVEL} + -Djava.library.path=${TEST_LIBRARY_DIRECTORY} + -cp "${TEST_CLASSPATH}" ${TEST_ARGS} ${TEST_PROGRAM} + ${ARGN} + WORKING_DIRECTORY ${TEST_FOLDER} + RESULT_VARIABLE TEST_RESULT + OUTPUT_FILE ${TEST_OUTPUT} + ERROR_FILE ${TEST_OUTPUT}.err + OUTPUT_VARIABLE TEST_OUT + ERROR_VARIABLE TEST_ERROR +) + +message (STATUS "COMMAND Result: ${TEST_RESULT}") + +# if the .err file exists and ERRROR_APPEND is enabled +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () + + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () + endif () +endif () + +# if the output file or the .err file needs to mask out error stack info +if (TEST_MASK_ERROR) + if (NOT TEST_ERRREF) + # the error stack has been appended to the output file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + else () + # the error stack remains in the .err file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) + endif () + string (REGEX REPLACE "Time:[^\n]+\n" "Time: XXXX\n" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "thread [0-9]*:" "thread (IDs):" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE ": ([^\n]*)[.]c " ": (file name) " TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE " line [0-9]*" " line (number)" TEST_STREAM "${TEST_STREAM}") + #string (REGEX REPLACE "v[1-9]*[.][0-9]*[.]" "version (number)." TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "HDF5 .[1-9]*[.][0-9]*[.][0-9]*[^)]*" "HDF5 (version (number)" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "H5Eget_auto[1-2]*" "H5Eget_auto(1 or 2)" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "H5Eset_auto[1-2]*" "H5Eset_auto(1 or 2)" TEST_STREAM "${TEST_STREAM}") + # write back the changes to the original files + if (NOT TEST_ERRREF) + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + else () + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + endif () +endif () + +# if the return value is !=expected bail out +if (NOT TEST_RESULT EQUAL TEST_EXPECT) + message (STATUS "ERROR OUTPUT: ${TEST_STREAM}") + message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != 0.\n${TEST_ERROR}") +endif () + +message (STATUS "COMMAND Error: ${TEST_ERROR}") + +# compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) +if (NOT TEST_SKIP_COMPARE) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") + endif () + + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () + endif () + + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) + endif () + endif () + endif () + + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") + + # again, if return value is !=0 scream and shout + if (TEST_COMPARE_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + endif () + endif () + + # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) + if (TEST_ERRREF) + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") + endif () + + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) + math (EXPR _FP_LEN "${len_ref} - 1") + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) + endif () + endif () + endif () + + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") + + # again, if return value is !=0 scream and shout + if (TEST_ERRREF_RESULT) + message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") + endif () + endif () +endif () + +set (TEST_GREP_RESULT 0) +if (TEST_GREP_COMPARE) + # now grep the output with the reference + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () + + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () + endif () + endif () +endif () + +# dump the output unless nodisplay option is set +if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY) + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + execute_process ( + COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM} + RESULT_VARIABLE TEST_RESULT + ) +endif () + +# everything went fine... +message (STATUS "${TEST_PROGRAM} program used vol ${TEST_VOL} Passed") + diff --git a/config/cmake/libh5cc.in b/config/cmake/libh5cc.in new file mode 100644 index 0000000..f462d56 --- /dev/null +++ b/config/cmake/libh5cc.in @@ -0,0 +1,32 @@ +#! /bin/sh +## +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +## + +prg=$0 +if [ ! -e "$prg" ]; then + case $prg in + (*/*) exit 1;; + (*) prg=$(command -v -- "$prg") || exit;; + esac +fi +dir=$( + cd -P -- "$(dirname -- "$prg")/.." && pwd -P +) || exit +prg=$dir/$(basename -- "$prg") || exit + +printf '%s\n' "$prg" +printf 'dir is %s\n' "$dir" + +export PKG_CONFIG_PATH=$dir/lib/pkgconfig + +@_PKG_CONFIG_COMPILER@ `pkg-config --define-variable=prefix=$dir --cflags --libs @_PKG_CONFIG_LIBNAME@-@_PKG_CONFIG_VERSION@` $@ diff --git a/config/cmake/libhdf5.pc.in b/config/cmake/libhdf5.pc.in new file mode 100644 index 0000000..4a2ebaa --- /dev/null +++ b/config/cmake/libhdf5.pc.in @@ -0,0 +1,14 @@ +prefix=@_PKG_CONFIG_PREFIX@ +exec_prefix=@_PKG_CONFIG_EXEC_PREFIX@ +libdir=@_PKG_CONFIG_LIBDIR@ +includedir=@_PKG_CONFIG_INCLUDEDIR@ + +Name: @_PKG_CONFIG_LIBNAME@ +Description: HDF5 (Hierarchical Data Format 5) Software Library +Version: @_PKG_CONFIG_VERSION@ + +Cflags: -I${includedir} +Libs: -L${libdir} @_PKG_CONFIG_SH_LIBS@ +Requires: @_PKG_CONFIG_REQUIRES@ +Libs.private: @_PKG_CONFIG_LIBS_PRIVATE@ @_PKG_CONFIG_LIBS@ +Requires.private: @_PKG_CONFIG_REQUIRES_PRIVATE@ diff --git a/config/cmake/libhdf5.settings.cmake.in b/config/cmake/libhdf5.settings.cmake.in index 8348af0..b745765 100644 --- a/config/cmake/libhdf5.settings.cmake.in +++ b/config/cmake/libhdf5.settings.cmake.in @@ -1,5 +1,5 @@ - SUMMARY OF THE HDF5 CONFIGURATION - ================================= + SUMMARY OF THE HDF5 CONFIGURATION + ================================= General Information: ------------------- @@ -14,10 +14,10 @@ General Information: Compiling Options: ------------------ Build Mode: @CMAKE_BUILD_TYPE@ - Debugging Symbols: @SYMBOLS@ - Asserts: @ASSERTS@ - Profiling: @PROFILING@ - Optimization Level: @OPTIMIZATION@ + Debugging Symbols: @HDF5_ENABLE_SYMBOLS@ + Asserts: @HDF5_ENABLE_ASSERTS@ + Profiling: @HDF5_ENABLE_PROFILING@ + Optimization Level: @HDF5_ENABLE_OPTIMIZATION@ Linking Options: ---------------- @@ -32,52 +32,58 @@ Linking Options: Languages: ---------- - C: yes + C: YES C Compiler: @CMAKE_C_COMPILER@ @CMAKE_C_COMPILER_VERSION@ CPPFLAGS: @CPPFLAGS@ H5_CPPFLAGS: @H5_CPPFLAGS@ AM_CPPFLAGS: @AM_CPPFLAGS@ CFLAGS: @CMAKE_C_FLAGS@ - H5_CFLAGS: @H5_CFLAGS@ + H5_CFLAGS: @HDF5_CMAKE_C_FLAGS@ AM_CFLAGS: @AM_CFLAGS@ Shared C Library: @H5_ENABLE_SHARED_LIB@ - Static C Library: YES + Static C Library: @H5_ENABLE_STATIC_LIB@ Fortran: @HDF5_BUILD_FORTRAN@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Compiler: @CMAKE_Fortran_COMPILER@ @CMAKE_Fortran_COMPILER_VERSION@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Flags: @CMAKE_Fortran_FLAGS@ -@BUILD_FORTRAN_CONDITIONAL_TRUE@ H5 Fortran Flags: @H5_FCFLAGS@ +@BUILD_FORTRAN_CONDITIONAL_TRUE@ H5 Fortran Flags: @HDF5_CMAKE_Fortran_FLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ AM Fortran Flags: @AM_FCFLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Shared Fortran Library: @H5_ENABLE_SHARED_LIB@ -@BUILD_FORTRAN_CONDITIONAL_TRUE@ Static Fortran Library: YES +@BUILD_FORTRAN_CONDITIONAL_TRUE@ Static Fortran Library: @H5_ENABLE_STATIC_LIB@ C++: @HDF5_BUILD_CPP_LIB@ @BUILD_CXX_CONDITIONAL_TRUE@ C++ Compiler: @CMAKE_CXX_COMPILER@ @CMAKE_CXX_COMPILER_VERSION@ @BUILD_CXX_CONDITIONAL_TRUE@ C++ Flags: @CMAKE_CXX_FLAGS@ -@BUILD_CXX_CONDITIONAL_TRUE@ H5 C++ Flags: @H5_CXXFLAGS@ +@BUILD_CXX_CONDITIONAL_TRUE@ H5 C++ Flags: @HDF5_CMAKE_CXX_FLAGS@ @BUILD_CXX_CONDITIONAL_TRUE@ AM C++ Flags: @AM_CXXFLAGS@ @BUILD_CXX_CONDITIONAL_TRUE@ Shared C++ Library: @H5_ENABLE_SHARED_LIB@ -@BUILD_CXX_CONDITIONAL_TRUE@ Static C++ Library: YES +@BUILD_CXX_CONDITIONAL_TRUE@ Static C++ Library: @H5_ENABLE_STATIC_LIB@ JAVA: @HDF5_BUILD_JAVA@ -@BUILD_JAVA_CONDITIONAL_TRUE@ JAVA Compiler: @CMAKE_Java_COMPILER@ @Java_VERSION@ +@BUILD_JAVA_CONDITIONAL_TRUE@ JAVA Compiler: @CMAKE_Java_COMPILER@ @Java_VERSION@ Features: --------- - Parallel HDF5: @HDF5_ENABLE_PARALLEL@ - High-level library: @HDF5_BUILD_HL_LIB@ - Threadsafety: @HDF5_ENABLE_THREADSAFE@ - Default API mapping: @DEFAULT_API_VERSION@ - With deprecated public symbols: @HDF5_ENABLE_DEPRECATED_SYMBOLS@ - I/O filters (external): @EXTERNAL_FILTERS@ - MPE: @H5_HAVE_LIBLMPE@ - Direct VFD: @H5_HAVE_DIRECT@ - dmalloc: @H5_HAVE_LIBDMALLOC@ - Packages w/ extra debug output: @INTERNAL_DEBUG_OUTPUT@ - API Tracing: @HDF5_ENABLE_TRACE@ - Using memory checker: @HDF5_ENABLE_USING_MEMCHECKER@ -Memory allocation sanity checks: @HDF5_MEMORY_ALLOC_SANITY_CHECK@ - Metadata trace file: @METADATATRACEFILE@ - Function Stack Tracing: @HDF5_ENABLE_CODESTACK@ - Strict File Format Checks: @HDF5_STRICT_FORMAT_CHECKS@ - Optimization Instrumentation: @HDF5_Enable_Instrument@ + Parallel HDF5: @HDF5_ENABLE_PARALLEL@ +Parallel Filtered Dataset Writes: @PARALLEL_FILTERED_WRITES@ + Large Parallel I/O: @LARGE_PARALLEL_IO@ + High-level library: @HDF5_BUILD_HL_LIB@ + Build HDF5 Tests: @BUILD_TESTING@ + Build HDF5 Tools: @HDF5_BUILD_TOOLS@ + Threadsafety: @HDF5_ENABLE_THREADSAFE@ + Default API mapping: @DEFAULT_API_VERSION@ + With deprecated public symbols: @HDF5_ENABLE_DEPRECATED_SYMBOLS@ + I/O filters (external): @EXTERNAL_FILTERS@ + MPE: @H5_HAVE_LIBLMPE@ + Direct VFD: @H5_HAVE_DIRECT@ + Mirror VFD: @H5_HAVE_MIRROR_VFD@ + (Read-Only) S3 VFD: @H5_HAVE_ROS3_VFD@ + (Read-Only) HDFS VFD: @H5_HAVE_LIBHDFS@ + dmalloc: @H5_HAVE_LIBDMALLOC@ + Packages w/ extra debug output: @INTERNAL_DEBUG_OUTPUT@ + API Tracing: @HDF5_ENABLE_TRACE@ + Using memory checker: @HDF5_ENABLE_USING_MEMCHECKER@ + Memory allocation sanity checks: @HDF5_MEMORY_ALLOC_SANITY_CHECK@ + Function Stack Tracing: @HDF5_ENABLE_CODESTACK@ + Strict File Format Checks: @HDF5_STRICT_FORMAT_CHECKS@ + Optimization Instrumentation: @HDF5_Enable_Instrument@ diff --git a/config/cmake/mccacheinit.cmake b/config/cmake/mccacheinit.cmake index 3f0dd4f..af07894 100644 --- a/config/cmake/mccacheinit.cmake +++ b/config/cmake/mccacheinit.cmake @@ -17,12 +17,12 @@ set (CMAKE_INSTALL_FRAMEWORK_PREFIX "Library/Frameworks" CACHE STRING "Frameworks installation directory" FORCE) -set (BUILD_SHARED_LIBS OFF CACHE BOOL "Build Shared Libraries" FORCE) - set (BUILD_TESTING ON CACHE BOOL "Build HDF5 Unit Testing" FORCE) set (HDF_PACKAGE_EXT "" CACHE STRING "Name of HDF package extension" FORCE) +set (HDF_PACKAGE_NAMESPACE "hdf5::" CACHE STRING "Name for HDF package namespace" FORCE) + set (HDF5_BUILD_CPP_LIB ON CACHE BOOL "Build HDF5 C++ Library" FORCE) set (HDF5_BUILD_EXAMPLES ON CACHE BOOL "Build HDF5 Library Examples" FORCE) @@ -33,59 +33,31 @@ set (HDF5_BUILD_HL_LIB ON CACHE BOOL "Build HIGH Level HDF5 Library" FORCE) set (HDF5_BUILD_TOOLS ON CACHE BOOL "Build HDF5 Tools" FORCE) -set (HDF5_BUILD_GENERATORS OFF CACHE BOOL "Build Test Generators" FORCE) - set (HDF5_ENABLE_Z_LIB_SUPPORT ON CACHE BOOL "Enable Zlib Filters" FORCE) set (HDF5_ENABLE_SZIP_SUPPORT ON CACHE BOOL "Use SZip Filter" FORCE) set (HDF5_ENABLE_SZIP_ENCODING ON CACHE BOOL "Use SZip Encoding" FORCE) -set (HDF5_ENABLE_HSIZET ON CACHE BOOL "Enable datasets larger than memory" FORCE) - -set (ALLOW_UNSUPPORTED OFF CACHE BOOL "Enable unsupported combinations of configuration options" FORCE) - -set (HDF5_ENABLE_DEPRECATED_SYMBOLS ON CACHE BOOL "Enable deprecated public API symbols" FORCE) - -set (HDF5_ENABLE_DIRECT_VFD OFF CACHE BOOL "Build the Direct I/O Virtual File Driver" FORCE) - -set (HDF5_ENABLE_PARALLEL OFF CACHE BOOL "Enable parallel build (requires MPI)" FORCE) - -set (MPIEXEC_MAX_NUMPROCS "3" CACHE STRING "Minimum number of processes for HDF parallel tests" FORCE) - -set (HDF5_BUILD_PARALLEL_ALL OFF CACHE BOOL "Build Parallel Programs" FORCE) - -set (HDF5_ENABLE_COVERAGE OFF CACHE BOOL "Enable code coverage for Libraries and Programs" FORCE) +set (MPIEXEC_MAX_NUMPROCS "4" CACHE STRING "Minimum number of processes for HDF parallel tests" FORCE) set (HDF5_ENABLE_USING_MEMCHECKER ON CACHE BOOL "Indicate that a memory checker is used" FORCE) -set (HDF5_MEMORY_ALLOC_SANITY_CHECK OFF CACHE BOOL "Indicate that internal memory allocation sanity checks are enabled" FORCE) - -set (HDF5_DISABLE_COMPILER_WARNINGS OFF CACHE BOOL "Disable compiler warnings" FORCE) - -set (HDF5_USE_FOLDERS ON CACHE BOOL "Enable folder grouping of projects in IDEs." FORCE) - -set (HDF5_USE_16_API_DEFAULT OFF CACHE BOOL "Use the HDF5 1.6.x API by default" FORCE) - -set (HDF5_USE_18_API_DEFAULT OFF CACHE BOOL "Use the HDF5 1.8.x API by default" FORCE) - -set (HDF5_ENABLE_THREADSAFE OFF CACHE BOOL "(WINDOWS)Enable Threadsafety" FORCE) - -set (HDF5_PACKAGE_EXTLIBS OFF CACHE BOOL "(WINDOWS)CPACK - include external libraries" FORCE) - set (HDF5_NO_PACKAGES ON CACHE BOOL "CPACK - Disable packaging" FORCE) -set (HDF5_ALLOW_EXTERNAL_SUPPORT "NO" CACHE STRING "Allow External Library Building (NO GIT SVN TGZ)" FORCE) -set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT SVN TGZ) +set (HDF5_ALLOW_EXTERNAL_SUPPORT "NO" CACHE STRING "Allow External Library Building (NO GIT TGZ)" FORCE) +set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT TGZ) set (ZLIB_TGZ_NAME "ZLib.tar.gz" CACHE STRING "Use ZLib from compressed file" FORCE) set (SZIP_TGZ_NAME "SZip.tar.gz" CACHE STRING "Use SZip from compressed file" FORCE) +set (SZAEC_TGZ_NAME "LIBAEC.tar.gz" CACHE STRING "Use SZip AEC from compressed file" FORCE) +set (USE_LIBAEC ON CACHE BOOL "Use libaec szip replacement" FORCE) set (CMAKE_BUILD_TYPE "Debug" CACHE STRING "Build Debug" FORCE) set (CTEST_CONFIGURATION_TYPE "Debug" CACHE STRING "Build Debug" FORCE) set (ZLIB_PACKAGE_NAME "zlib" CACHE STRING "Name of ZLIB package" FORCE) - +set (LIBAEC_PACKAGE_NAME "libaec" CACHE STRING "Name of AEC SZIP package" FORCE) set (SZIP_PACKAGE_NAME "szip" CACHE STRING "Name of SZIP package" FORCE) diff --git a/config/cmake/patch.xml b/config/cmake/patch.xml index 70571c5..1bdff3e 100644 --- a/config/cmake/patch.xml +++ b/config/cmake/patch.xml @@ -1,5 +1,5 @@ <CPackWiXPatch> - <CPackWiXFragment Id="CM_CP_libraries.bin.hdf5.dll"> + <CPackWiXFragment Id="CM_CP_libraries.bin.hdf5.dll"> <Environment Id="PATH" Name="PATH" Value="[CM_DP_libraries.bin]" @@ -7,5 +7,5 @@ Part="last" Action="set" System="yes"/> - </CPackWiXFragment> + </CPackWiXFragment> </CPackWiXPatch> diff --git a/config/cmake/scripts/CTestScript.cmake b/config/cmake/scripts/CTestScript.cmake index 3cb9a5e..e3659f6 100755..100644 --- a/config/cmake/scripts/CTestScript.cmake +++ b/config/cmake/scripts/CTestScript.cmake @@ -9,301 +9,377 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required (VERSION 3.2.2 FATAL_ERROR)
-########################################################
-# This dashboard is maintained by The HDF Group
-# For any comments please contact cdashhelp@hdfgroup.org
-#
-########################################################
-# -----------------------------------------------------------
-# -- Get environment
-# -----------------------------------------------------------
-if (NOT SITE_OS_NAME)
- ## machine name not provided - attempt to discover with uname
- ## -- set hostname
- ## --------------------------
- find_program (HOSTNAME_CMD NAMES hostname)
- exec_program (${HOSTNAME_CMD} ARGS OUTPUT_VARIABLE HOSTNAME)
- set (CTEST_SITE "${HOSTNAME}${CTEST_SITE_EXT}")
- find_program (UNAME NAMES uname)
- macro (getuname name flag)
- exec_program ("${UNAME}" ARGS "${flag}" OUTPUT_VARIABLE "${name}")
- endmacro ()
-
- getuname (osname -s)
- getuname (osrel -r)
- getuname (cpu -m)
- message (STATUS "Dashboard script uname output: ${osname}-${osrel}-${cpu}\n")
-
- set (CTEST_BUILD_NAME "${osname}-${osrel}-${cpu}")
- if (SITE_BUILDNAME_SUFFIX)
- set (CTEST_BUILD_NAME "${SITE_BUILDNAME_SUFFIX}-${CTEST_BUILD_NAME}")
- endif ()
- set (BUILD_OPTIONS "${ADD_BUILD_OPTIONS}")
-else ()
- ## machine name provided
- ## --------------------------
- if (CMAKE_HOST_UNIX)
- set (CTEST_BUILD_NAME "${SITE_OS_NAME}-${SITE_OS_VERSION}-${SITE_OS_BITS}-${SITE_COMPILER_NAME}-${SITE_COMPILER_VERSION}")
- else ()
- set (CTEST_BUILD_NAME "${SITE_OS_NAME}-${SITE_OS_VERSION}-${SITE_COMPILER_NAME}")
- endif ()
- if (SITE_BUILDNAME_SUFFIX)
- set (CTEST_BUILD_NAME "${CTEST_BUILD_NAME}-${SITE_BUILDNAME_SUFFIX}")
- endif ()
- set (BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDNAME:STRING=${CTEST_BUILD_NAME}")
-endif ()
-
-#-----------------------------------------------------------------------------
-# MAC machines need special option
-#-----------------------------------------------------------------------------
-if (APPLE)
- # Compiler choice
- execute_process (COMMAND xcrun --find cc OUTPUT_VARIABLE XCODE_CC OUTPUT_STRIP_TRAILING_WHITESPACE)
- execute_process (COMMAND xcrun --find c++ OUTPUT_VARIABLE XCODE_CXX OUTPUT_STRIP_TRAILING_WHITESPACE)
- set (ENV{CC} "${XCODE_CC}")
- set (ENV{CXX} "${XCODE_CXX}")
-
- if (NOT NO_MAC_FORTRAN)
- # Shared fortran is not supported, build static
- set (BUILD_OPTIONS "${BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF -DCMAKE_ANSI_CFLAGS:STRING=-fPIC")
- else ()
- set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=OFF")
- endif ()
-
- set (BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=ON -DCMAKE_BUILD_WITH_INSTALL_RPATH:BOOL=OFF")
-endif ()
-
-#-----------------------------------------------------------------------------
-set (NEED_REPOSITORY_CHECKOUT 0)
-set (CTEST_CMAKE_COMMAND "\"${CMAKE_COMMAND}\"")
-if (CTEST_USE_TAR_SOURCE)
- ## Uncompress source if tar file provided
- ## --------------------------
- if (WIN32)
- message (STATUS "extracting... [${CMAKE_EXECUTABLE_NAME} x ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip]")
- execute_process (COMMAND ${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip RESULT_VARIABLE rv)
- else ()
- message (STATUS "extracting... [${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE}.tar]")
- execute_process (COMMAND ${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE}.tar RESULT_VARIABLE rv)
- endif ()
-
- if (NOT rv EQUAL 0)
- message (STATUS "extracting... [error-(${rv}) clean up]")
- file (REMOVE_RECURSE "${CTEST_SOURCE_DIRECTORY}")
- message (FATAL_ERROR "error: extract of ${CTEST_USE_TAR_SOURCE} failed")
- endif ()
-
- file (RENAME ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE} ${CTEST_SOURCE_DIRECTORY})
- set (LOCAL_SKIP_UPDATE "TRUE")
-else ()
- if (LOCAL_UPDATE)
- if (CTEST_USE_GIT_SOURCE)
- find_program (CTEST_GIT_COMMAND NAMES git git.cmd)
- set (CTEST_GIT_UPDATE_OPTIONS)
-
- if (NOT EXISTS "${CTEST_SOURCE_DIRECTORY}")
- set (NEED_REPOSITORY_CHECKOUT 1)
- endif ()
-
- if (${NEED_REPOSITORY_CHECKOUT})
- if (REPOSITORY_BRANCH)
- set (CTEST_GIT_options "clone \"${REPOSITORY_URL}\" --branch \"${REPOSITORY_BRANCH}\" --single-branch \"${CTEST_SOURCE_DIRECTORY}\" --recurse-submodules")
- else ()
- set (CTEST_GIT_options "clone \"${REPOSITORY_URL}\" \"${CTEST_SOURCE_DIRECTORY}\" --recurse-submodules")
- endif ()
- set (CTEST_CHECKOUT_COMMAND "${CTEST_GIT_COMMAND} ${CTEST_GIT_options}")
- else ()
- set (CTEST_GIT_options "pull")
- endif ()
- set (CTEST_UPDATE_COMMAND "${CTEST_GIT_COMMAND}")
- else ()
- ## --------------------------
- ## use subversion to get source
- #-----------------------------------------------------------------------------
- ## cygwin does not handle the find_package() call
- ## --------------------------
- set (CTEST_UPDATE_COMMAND "SVNCommand")
- if (NOT SITE_CYGWIN})
- find_package (Subversion)
- set (CTEST_SVN_COMMAND "${Subversion_SVN_EXECUTABLE}")
- set (CTEST_UPDATE_COMMAND "${Subversion_SVN_EXECUTABLE}")
- else ()
- set (CTEST_SVN_COMMAND "/usr/bin/svn")
- set (CTEST_UPDATE_COMMAND "/usr/bin/svn")
- endif ()
-
- if (NOT EXISTS "${CTEST_SOURCE_DIRECTORY}")
- set (NEED_REPOSITORY_CHECKOUT 1)
- endif ()
-
- if (NOT CTEST_REPO_VERSION)
- set (CTEST_REPO_VERSION "HEAD")
- endif ()
- if (${NEED_REPOSITORY_CHECKOUT})
- set (CTEST_CHECKOUT_COMMAND
- "\"${CTEST_SVN_COMMAND}\" co ${REPOSITORY_URL} \"${CTEST_SOURCE_DIRECTORY}\" -r ${CTEST_REPO_VERSION}")
- else ()
- if (CTEST_REPO_VERSION)
- set (CTEST_SVN_UPDATE_OPTIONS "-r ${CTEST_REPO_VERSION}")
- endif ()
- endif ()
- endif ()
- endif ()
-endif ()
-
-#-----------------------------------------------------------------------------
-## Clear the build directory
-## --------------------------
-set (CTEST_START_WITH_EMPTY_BINARY_DIRECTORY TRUE)
-if (NOT EXISTS "${CTEST_BINARY_DIRECTORY}")
- file (MAKE_DIRECTORY "${CTEST_BINARY_DIRECTORY}")
-else ()
- ctest_empty_binary_directory (${CTEST_BINARY_DIRECTORY})
-endif ()
-
-# Use multiple CPU cores to build
-include (ProcessorCount)
-ProcessorCount (N)
-if (NOT N EQUAL 0)
- if (NOT WIN32)
- set (CTEST_BUILD_FLAGS -j${N})
- endif ()
- set (ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N})
-endif ()
-
-#-----------------------------------------------------------------------------
-# Send the main script as a note.
-list (APPEND CTEST_NOTES_FILES
- "${CTEST_SCRIPT_DIRECTORY}/${CTEST_SCRIPT_NAME}"
- "${CMAKE_CURRENT_LIST_FILE}"
- "${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake"
-)
-
-#-----------------------------------------------------------------------------
-# Check for required variables.
-# --------------------------
-foreach (req
- CTEST_CMAKE_GENERATOR
- CTEST_SITE
- CTEST_BUILD_NAME
- )
- if (NOT DEFINED ${req})
- message (FATAL_ERROR "The containing script must set ${req}")
- endif ()
-endforeach ()
-
-#-----------------------------------------------------------------------------
-# Initialize the CTEST commands
-#------------------------------
-if(CMAKE_GENERATOR_TOOLSET)
- set(CTEST_CONFIGURE_TOOLSET "-T${CMAKE_GENERATOR_TOOLSET}")
-else ()
- set(CTEST_CONFIGURE_TOOLSET "")
-endif()
-if (LOCAL_MEMCHECK_TEST)
- find_program (CTEST_MEMORYCHECK_COMMAND NAMES valgrind)
- set (CTEST_CONFIGURE_COMMAND
- "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/mccacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\""
- )
-else ()
- if (LOCAL_COVERAGE_TEST)
- find_program (CTEST_COVERAGE_COMMAND NAMES gcov)
- endif ()
- set (CTEST_CONFIGURE_COMMAND
- "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\""
- )
-endif ()
-
-#-----------------------------------------------------------------------------
-## -- set output to english
-set ($ENV{LC_MESSAGES} "en_EN")
-
-# Print summary information.
-foreach (v
- CTEST_SITE
- CTEST_BUILD_NAME
- CTEST_SOURCE_DIRECTORY
- CTEST_BINARY_DIRECTORY
- CTEST_CMAKE_GENERATOR
- CTEST_CONFIGURATION_TYPE
- CTEST_GIT_COMMAND
- CTEST_CHECKOUT_COMMAND
- CTEST_CONFIGURE_COMMAND
- CTEST_SCRIPT_DIRECTORY
- CTEST_USE_LAUNCHERS
- )
- set (vars "${vars} ${v}=[${${v}}]\n")
-endforeach ()
-message (STATUS "Dashboard script configuration:\n${vars}\n")
-
-#-----------------------------------------------------------------------------
-#-----------------------------------------------------------------------------
- ## NORMAL process
- ## -- LOCAL_UPDATE updates the source folder from svn
- ## -- LOCAL_SUBMIT reports to CDash server
- ## -- LOCAL_SKIP_TEST skips the test process (only builds)
- ## -- LOCAL_MEMCHECK_TEST executes the Valgrind testing
- ## -- LOCAL_COVERAGE_TEST executes code coverage process
- ## --------------------------
- ctest_start (${MODEL} TRACK ${MODEL})
- if (LOCAL_UPDATE)
- ctest_update (SOURCE "${CTEST_SOURCE_DIRECTORY}")
- endif ()
- configure_file (${CTEST_SOURCE_DIRECTORY}/config/cmake/CTestCustom.cmake ${CTEST_BINARY_DIRECTORY}/CTestCustom.cmake)
- ctest_read_custom_files ("${CTEST_BINARY_DIRECTORY}")
- ctest_configure (BUILD "${CTEST_BINARY_DIRECTORY}" RETURN_VALUE res)
- if (LOCAL_SUBMIT)
- ctest_submit (PARTS Update Configure Notes)
- endif ()
- if (${res} LESS 0 OR ${res} GREATER 0)
- file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed Configure: ${res}\n")
- endif ()
-
- ctest_build (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND RETURN_VALUE res NUMBER_ERRORS errval)
- if (LOCAL_SUBMIT)
- ctest_submit (PARTS Build)
- endif ()
- if (${res} LESS 0 OR ${res} GREATER 0 OR ${errval} GREATER 0)
- file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed ${errval} Build: ${res}\n")
- endif ()
-
- if (NOT LOCAL_SKIP_TEST)
- if (NOT LOCAL_MEMCHECK_TEST)
- ctest_test (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND ${ctest_test_args} RETURN_VALUE res)
- if (LOCAL_SUBMIT)
- ctest_submit (PARTS Test)
- endif ()
- if (${res} LESS 0 OR ${res} GREATER 0)
- file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed Tests: ${res}\n")
- endif ()
- else ()
- ctest_memcheck (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND ${ctest_test_args})
- if (LOCAL_SUBMIT)
- ctest_submit (PARTS MemCheck)
- endif ()
- endif ()
- if (LOCAL_COVERAGE_TEST)
- ctest_coverage (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND)
- if (LOCAL_SUBMIT)
- ctest_submit (PARTS Coverage)
- endif ()
- endif ()
- endif ()
-
- if (NOT LOCAL_MEMCHECK_TEST AND NOT LOCAL_NO_PACKAGE AND NOT LOCAL_SKIP_BUILD)
- ##-----------------------------------------------
- ## Package the product
- ##-----------------------------------------------
- execute_process (COMMAND cpack -C ${CTEST_CONFIGURATION_TYPE} -V
- WORKING_DIRECTORY ${CTEST_BINARY_DIRECTORY}
- RESULT_VARIABLE cpackResult
- OUTPUT_VARIABLE cpackLog
- ERROR_VARIABLE cpackLog.err
- )
- file (WRITE ${CTEST_BINARY_DIRECTORY}/cpack.log "${cpackLog.err}" "${cpackLog}")
- if (cpackResult GREATER 0)
- file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed packaging: ${cpackResult}:${cpackLog.err} \n")
- endif ()
- endif ()
-#-----------------------------------------------------------------------------
+cmake_minimum_required (VERSION 3.12) +######################################################## +# This dashboard is maintained by The HDF Group +# For any comments please contact cdashhelp@hdfgroup.org +# +######################################################## +# ----------------------------------------------------------- +# -- Get environment +# ----------------------------------------------------------- +if (NOT SITE_OS_NAME) + ## machine name not provided - attempt to discover with uname + ## -- set hostname + ## -------------------------- + find_program (HOSTNAME_CMD NAMES hostname) + exec_program (${HOSTNAME_CMD} ARGS OUTPUT_VARIABLE HOSTNAME) + set (CTEST_SITE "${HOSTNAME}${CTEST_SITE_EXT}") + find_program (UNAME NAMES uname) + macro (getuname name flag) + exec_program ("${UNAME}" ARGS "${flag}" OUTPUT_VARIABLE "${name}") + endmacro () + + getuname (osname -s) + getuname (osrel -r) + getuname (cpu -m) + message (STATUS "Dashboard script uname output: ${osname}-${osrel}-${cpu}\n") + + set (CTEST_BUILD_NAME "${osname}-${osrel}-${cpu}") +else () + ## machine name provided + ## -------------------------- + if (CMAKE_HOST_UNIX) + set (CTEST_BUILD_NAME "${SITE_OS_NAME}-${SITE_OS_VERSION}-${SITE_OS_BITS}-${SITE_COMPILER_NAME}-${SITE_COMPILER_VERSION}") + else () + set (CTEST_BUILD_NAME "${SITE_OS_NAME}-${SITE_OS_VERSION}-${SITE_COMPILER_NAME}") + endif () +endif () +if (SITE_BUILDNAME_SUFFIX) + set (CTEST_BUILD_NAME "${SITE_BUILDNAME_SUFFIX}-${CTEST_BUILD_NAME}") +endif () +set (BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDNAME:STRING=${CTEST_BUILD_NAME}") + +# Launchers work only with Makefile and Ninja generators. +if(NOT "${CTEST_CMAKE_GENERATOR}" MATCHES "Make|Ninja") + set(CTEST_USE_LAUNCHERS 0) + set(ENV{CTEST_USE_LAUNCHERS_DEFAULT} 0) + set(BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=OFF") +else() + set(CTEST_USE_LAUNCHERS 1) + set(ENV{CTEST_USE_LAUNCHERS_DEFAULT} 1) + set(BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=ON") +endif() + +#----------------------------------------------------------------------------- +# MAC machines need special option +#----------------------------------------------------------------------------- +if (APPLE) + # Compiler choice + execute_process (COMMAND xcrun --find cc OUTPUT_VARIABLE XCODE_CC OUTPUT_STRIP_TRAILING_WHITESPACE) + execute_process (COMMAND xcrun --find c++ OUTPUT_VARIABLE XCODE_CXX OUTPUT_STRIP_TRAILING_WHITESPACE) + set (ENV{CC} "${XCODE_CC}") + set (ENV{CXX} "${XCODE_CXX}") + + set (BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=ON -DCMAKE_BUILD_WITH_INSTALL_RPATH:BOOL=OFF") +endif () + +#----------------------------------------------------------------------------- +set (NEED_REPOSITORY_CHECKOUT 0) +set (CTEST_CMAKE_COMMAND "\"${CMAKE_COMMAND}\"") +if (CTEST_USE_TAR_SOURCE) + ## Uncompress source if tar file provided + ## -------------------------- + if (WIN32 AND NOT MINGW) + message (STATUS "extracting... [${CMAKE_EXECUTABLE_NAME} x ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip]") + execute_process (COMMAND ${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}\\${CTEST_USE_TAR_SOURCE}.zip RESULT_VARIABLE rv) + else () + message (STATUS "extracting... [${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE}.tar]") + execute_process (COMMAND ${CMAKE_EXECUTABLE_NAME} -E tar -xvf ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE}.tar RESULT_VARIABLE rv) + endif () + + if (NOT rv EQUAL 0) + message (STATUS "extracting... [error-(${rv}) clean up]") + file (REMOVE_RECURSE "${CTEST_SOURCE_DIRECTORY}") + message (FATAL_ERROR "error: extract of ${CTEST_USE_TAR_SOURCE} failed") + endif () + + file (RENAME ${CTEST_DASHBOARD_ROOT}/${CTEST_USE_TAR_SOURCE} ${CTEST_SOURCE_DIRECTORY}) + set (LOCAL_SKIP_UPDATE "TRUE") +else () + if (LOCAL_UPDATE) + if (CTEST_USE_GIT_SOURCE) + find_program (CTEST_GIT_COMMAND NAMES git git.cmd) + set (CTEST_GIT_UPDATE_OPTIONS) + + if (NOT EXISTS "${CTEST_SOURCE_DIRECTORY}") + set (NEED_REPOSITORY_CHECKOUT 1) + endif () + + if (${NEED_REPOSITORY_CHECKOUT}) + if (REPOSITORY_BRANCH) + set (CTEST_GIT_options "clone \"${REPOSITORY_URL}\" --branch \"${REPOSITORY_BRANCH}\" --single-branch \"${CTEST_SOURCE_DIRECTORY}\" --recurse-submodules") + else () + set (CTEST_GIT_options "clone \"${REPOSITORY_URL}\" \"${CTEST_SOURCE_DIRECTORY}\" --recurse-submodules") + endif () + set (CTEST_CHECKOUT_COMMAND "${CTEST_GIT_COMMAND} ${CTEST_GIT_options}") + else () + set (CTEST_GIT_options "pull") + endif () + set (CTEST_UPDATE_COMMAND "${CTEST_GIT_COMMAND}") + else () + ## -------------------------- + ## use subversion to get source + #----------------------------------------------------------------------------- + ## cygwin does not handle the find_package() call + ## -------------------------- + set (CTEST_UPDATE_COMMAND "SVNCommand") + if (NOT SITE_CYGWIN}) + find_package (Subversion) + set (CTEST_SVN_COMMAND "${Subversion_SVN_EXECUTABLE}") + set (CTEST_UPDATE_COMMAND "${Subversion_SVN_EXECUTABLE}") + else () + set (CTEST_SVN_COMMAND "/usr/bin/svn") + set (CTEST_UPDATE_COMMAND "/usr/bin/svn") + endif () + + if (NOT EXISTS "${CTEST_SOURCE_DIRECTORY}") + set (NEED_REPOSITORY_CHECKOUT 1) + endif () + + if (NOT CTEST_REPO_VERSION) + set (CTEST_REPO_VERSION "HEAD") + endif () + if (${NEED_REPOSITORY_CHECKOUT}) + set (CTEST_CHECKOUT_COMMAND + "\"${CTEST_SVN_COMMAND}\" co ${REPOSITORY_URL} \"${CTEST_SOURCE_DIRECTORY}\" -r ${CTEST_REPO_VERSION}") + else () + if (CTEST_REPO_VERSION) + set (CTEST_SVN_UPDATE_OPTIONS "-r ${CTEST_REPO_VERSION}") + endif () + endif () + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +## Clear the build directory +## -------------------------- +set (CTEST_START_WITH_EMPTY_BINARY_DIRECTORY TRUE) +if (NOT EXISTS "${CTEST_BINARY_DIRECTORY}") + file (MAKE_DIRECTORY "${CTEST_BINARY_DIRECTORY}") +else () + ctest_empty_binary_directory (${CTEST_BINARY_DIRECTORY}) +endif () + +# Use multiple CPU cores to build +include (ProcessorCount) +ProcessorCount (N) +if (NOT N EQUAL 0) + if (MAX_PROC_COUNT) + if (N GREATER MAX_PROC_COUNT) + set (N ${MAX_PROC_COUNT}) + endif () + endif () + if (NOT WIN32) + set (CTEST_BUILD_FLAGS -j${N}) + endif () + set (ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N}) +endif () + +#----------------------------------------------------------------------------- +# Send the main script as a note. +list (APPEND CTEST_NOTES_FILES + "${CTEST_SCRIPT_DIRECTORY}/${CTEST_SCRIPT_NAME}" + "${CMAKE_CURRENT_LIST_FILE}" + "${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake" +) + +#----------------------------------------------------------------------------- +# Check for required variables. +# -------------------------- +foreach (req + CTEST_CMAKE_GENERATOR + CTEST_SITE + CTEST_BUILD_NAME + ) + if (NOT DEFINED ${req}) + message (FATAL_ERROR "The containing script must set ${req}") + endif () +endforeach () + +#----------------------------------------------------------------------------- +# Initialize the CTEST commands +#------------------------------ +if (CMAKE_GENERATOR_TOOLSET) + set (CTEST_CONFIGURE_TOOLSET "-T${CMAKE_GENERATOR_TOOLSET}") +else () + set (CTEST_CONFIGURE_TOOLSET "") +endif() +if (CMAKE_GENERATOR_ARCHITECTURE) + set (CTEST_CONFIGURE_ARCHITECTURE "-A${CMAKE_GENERATOR_ARCHITECTURE}") +else () + set (CTEST_CONFIGURE_ARCHITECTURE "") +endif() +if (LOCAL_MEMCHECK_TEST) + if(LOCAL_USE_VALGRIND) + set (CTEST_MEMORYCHECK_COMMAND_OPTIONS "-v --tool=memcheck --leak-check=full --track-fds=yes --num-callers=50 --show-reachable=yes --track-origins=yes --malloc-fill=0xff --free-fill=0xfe") + find_program(CTEST_MEMORYCHECK_COMMAND NAMES valgrind) + endif() + set (CTEST_CONFIGURE_COMMAND + "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/mccacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_ARCHITECTURE}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\"" + ) +else () + if (LOCAL_COVERAGE_TEST) + if(LOCAL_USE_GCOV) + find_program (CTEST_COVERAGE_COMMAND NAMES gcov) + endif () + endif () + set (CTEST_CONFIGURE_COMMAND + "${CTEST_CMAKE_COMMAND} -C \"${CTEST_SOURCE_DIRECTORY}/config/cmake/cacheinit.cmake\" -DCMAKE_BUILD_TYPE:STRING=${CTEST_CONFIGURATION_TYPE} ${BUILD_OPTIONS} \"-G${CTEST_CMAKE_GENERATOR}\" \"${CTEST_CONFIGURE_ARCHITECTURE}\" \"${CTEST_CONFIGURE_TOOLSET}\" \"${CTEST_SOURCE_DIRECTORY}\"" + ) +endif () + +#----------------------------------------------------------------------------- +## -- set output to english +set ($ENV{LC_MESSAGES} "en_EN") + +# Print summary information. +foreach (v + CTEST_SITE + CTEST_BUILD_NAME + CTEST_SOURCE_DIRECTORY + CTEST_BINARY_DIRECTORY + CTEST_CMAKE_GENERATOR + CTEST_CONFIGURATION_TYPE + CTEST_GIT_COMMAND + CTEST_CHECKOUT_COMMAND + CTEST_CONFIGURE_COMMAND + CTEST_SCRIPT_DIRECTORY + CTEST_USE_LAUNCHERS + ) + set (vars "${vars} ${v}=[${${v}}]\n") +endforeach () +message (STATUS "Dashboard script configuration:\n${vars}\n") + +#----------------------------------------------------------------------------- + +################################################################### +######### Following is for submission to CDash ############ +################################################################### +if (NOT DEFINED MODEL) + set (MODEL "Experimental") +endif () + +#----------------------------------------------------------------------------- + ## NORMAL process + ## -- LOCAL_UPDATE updates the source folder from svn + ## -- LOCAL_SUBMIT reports to CDash server + ## -- LOCAL_SKIP_TEST skips the test process (only builds) + ## -- LOCAL_MEMCHECK_TEST executes the Valgrind testing + ## -- LOCAL_COVERAGE_TEST executes code coverage process + ## -------------------------- + ctest_start (${MODEL} TRACK ${MODEL}) + if (LOCAL_UPDATE) + ctest_update (SOURCE "${CTEST_SOURCE_DIRECTORY}") + endif () + configure_file (${CTEST_SOURCE_DIRECTORY}/config/cmake/CTestCustom.cmake ${CTEST_BINARY_DIRECTORY}/CTestCustom.cmake) + ctest_read_custom_files ("${CTEST_BINARY_DIRECTORY}") + ctest_configure (BUILD "${CTEST_BINARY_DIRECTORY}" RETURN_VALUE res) + if (LOCAL_SUBMIT) + ctest_submit (PARTS Update Configure Notes) + endif () + if (${res} LESS 0 OR ${res} GREATER 0) + file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed Configure: ${res}\n") + endif () + + # On Cray XC40, configuring fails in the Fortran section when using the craype-mic-knl module. + # When the configure phase is done with the craype-haswell module and the build phase is done + # with the craype-mic-knl module, configure succeeds and tests pass on the knl compute nodes + # for Intel, Cray, GCC and Clang compilers. If the variables aren't set or if not + # cross compiling, the module switch will not occur. + if (CMAKE_CROSSCOMPILING AND COMPILENODE_HWCOMPILE_MODULE AND COMPUTENODE_HWCOMPILE_MODULE) + execute_process (COMMAND module switch ${COMPILENODE_HWCOMPILE_MODULE} ${COMPUTENODE_HWCOMPILE_MODULE}) + endif () + + ctest_build (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND RETURN_VALUE res NUMBER_ERRORS errval) + if (LOCAL_SUBMIT) + ctest_submit (PARTS Build) + endif () + if (${res} LESS 0 OR ${res} GREATER 0 OR ${errval} GREATER 0) + file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed ${errval} Build: ${res}\n") + endif () + + if (NOT LOCAL_SKIP_TEST) + if (NOT LOCAL_MEMCHECK_TEST) + if (NOT LOCAL_BATCH_TEST) + ctest_test (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND ${ctest_test_args} RETURN_VALUE res) + else () + file(STRINGS ${CTEST_BINARY_DIRECTORY}/Testing/TAG TAG_CONTENTS REGEX "^2([0-9]+)[-]([0-9]+)$") + if (LOCAL_BATCH_SCRIPT_COMMAND STREQUAL "raybsub") + execute_process (COMMAND ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_COMMAND} ${LOCAL_BATCH_SCRIPT_ARGS} ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_NAME}) + else () + if (LOCAL_BATCH_SCRIPT_COMMAND STREQUAL "qsub") + execute_process (COMMAND ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_NAME} ctestS.out) + else () + execute_process (COMMAND ${LOCAL_BATCH_SCRIPT_COMMAND} ${LOCAL_BATCH_SCRIPT_ARGS} ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_NAME}) + endif() + endif () + message(STATUS "Check for existence of ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml") + execute_process(COMMAND ls ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml RESULT_VARIABLE result OUTPUT_QUIET ERROR_QUIET) + while(result) + ctest_sleep(60) + execute_process(COMMAND ls ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml RESULT_VARIABLE result OUTPUT_QUIET ERROR_QUIET) + endwhile(result) + if (LOCAL_BATCH_SCRIPT_PARALLEL_NAME) + if (LOCAL_SUBMIT) + ctest_submit (PARTS Test) + endif () + message(STATUS "Found ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml for serial tests. Renaming to SerialTest.xml") + file (RENAME ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/SerialTest.xml) + file (RENAME ${CTEST_BINARY_DIRECTORY}/Testing/Temporary/LastTest_${TAG_CONTENTS}.log ${CTEST_BINARY_DIRECTORY}/Testing/Temporary/LastTest_${TAG_CONTENTS}_Serial.log) + unset(result CACHE) + if (LOCAL_BATCH_SCRIPT_COMMAND STREQUAL "raybsub") + execute_process (COMMAND ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_COMMAND} ${LOCAL_BATCH_SCRIPT_ARGS} ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}) + else () + if (LOCAL_BATCH_SCRIPT_COMMAND STREQUAL "qsub") + execute_process (COMMAND ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_NAME} ctestP.out) + else () + execute_process (COMMAND ${LOCAL_BATCH_SCRIPT_COMMAND} ${LOCAL_BATCH_SCRIPT_ARGS} ${CTEST_BINARY_DIRECTORY}/${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}) + endif () + endif () + message(STATUS "Check for existence of ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml") + execute_process(COMMAND ls ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml RESULT_VARIABLE result OUTPUT_QUIET ERROR_QUIET) + while(result) + ctest_sleep(60) + execute_process(COMMAND ls ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml RESULT_VARIABLE result OUTPUT_QUIET ERROR_QUIET) + endwhile(result) + message(STATUS "Found ${CTEST_BINARY_DIRECTORY}/Testing/${TAG_CONTENTS}/Test.xml for parallel tests.") + endif() + endif () + if (LOCAL_SUBMIT) + ctest_submit (PARTS Test) + endif () + if (${res} LESS 0 OR ${res} GREATER 0) + file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed Tests: ${res}\n") + endif () + else () + ctest_memcheck (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND ${ctest_test_args}) + if (LOCAL_SUBMIT) + ctest_submit (PARTS MemCheck) + endif () + endif () + if (LOCAL_COVERAGE_TEST) + ctest_coverage (BUILD "${CTEST_BINARY_DIRECTORY}" APPEND) + if (LOCAL_SUBMIT) + ctest_submit (PARTS Coverage) + endif () + endif () + endif () + + if (NOT LOCAL_MEMCHECK_TEST AND NOT LOCAL_NO_PACKAGE AND NOT LOCAL_SKIP_BUILD) + ##----------------------------------------------- + ## Package the product + ##----------------------------------------------- + execute_process (COMMAND cpack -C ${CTEST_CONFIGURATION_TYPE} -V + WORKING_DIRECTORY ${CTEST_BINARY_DIRECTORY} + RESULT_VARIABLE cpackResult + OUTPUT_VARIABLE cpackLog + ERROR_VARIABLE cpackLog.err + ) + file (WRITE ${CTEST_BINARY_DIRECTORY}/cpack.log "${cpackLog.err}" "${cpackLog}") + if (cpackResult GREATER 0) + file (APPEND ${CTEST_SCRIPT_DIRECTORY}/FailedCTest.txt "Failed packaging: ${cpackResult}:${cpackLog.err} \n") + endif () + endif () +#----------------------------------------------------------------------------- diff --git a/config/cmake/scripts/HDF5config.cmake b/config/cmake/scripts/HDF5config.cmake index e7b73b3..7b7560f 100755..100644 --- a/config/cmake/scripts/HDF5config.cmake +++ b/config/cmake/scripts/HDF5config.cmake @@ -9,282 +9,251 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -#############################################################################################
-### ${CTEST_SCRIPT_ARG} is of the form OPTION=VALUE ###
-### BUILD_GENERATOR required [Unix, VS2017, VS201764, VS2015, VS201564, VS2013, VS201364] ###
-### ctest -S HDF5config.cmake,BUILD_GENERATOR=VS201764 -C Release -VV -O hdf5.log ###
-#############################################################################################
-
-cmake_minimum_required (VERSION 3.2.2 FATAL_ERROR)
-############################################################################
-# Usage:
-# ctest -S HDF5config.cmake,OPTION=VALUE -C Release -VV -O test.log
-# where valid options for OPTION are:
-# BUILD_GENERATOR - The cmake build generator:
-# Unix * Unix Makefiles
+############################################################################################# +### ${CTEST_SCRIPT_ARG} is of the form OPTION=VALUE ### +### BUILD_GENERATOR required [Unix, VS2017, VS201764, VS2015, VS201564, VS2013, VS201364] ### +### ctest -S HDF5config.cmake,BUILD_GENERATOR=VS201764 -C Release -VV -O hdf5.log ### +############################################################################################# + +cmake_minimum_required (VERSION 3.12) +############################################################################ +# Usage: +# ctest -S HDF5config.cmake,OPTION=VALUE -C Release -VV -O test.log +# where valid options for OPTION are: +# BUILD_GENERATOR - The cmake build generator: +# Unix * Unix Makefiles +# VS2019 * Visual Studio 16 2019 +# VS201964 * Visual Studio 16 2019 # VS2017 * Visual Studio 15 2017 # VS201764 * Visual Studio 15 2017 Win64 -# VS2015 * Visual Studio 14 2015
-# VS201564 * Visual Studio 14 2015 Win64
-# VS2013 * Visual Studio 12 2013
-# VS201364 * Visual Studio 12 2013 Win64
-#
-# INSTALLDIR - root folder where hdf5 is installed
-# CTEST_CONFIGURATION_TYPE - Release, Debug, etc
-# CTEST_SOURCE_NAME - source folder
-# STATIC_ONLY - Build/use static libraries
-# FORTRAN_LIBRARIES - Build/use fortran libraries
-# JAVA_LIBRARIES - Build/use java libraries
-# NO_MAC_FORTRAN - Yes to be SHARED on a Mac
-##############################################################################
-
-set (CTEST_SOURCE_VERSION "1.11.0")
-set (CTEST_SOURCE_VERSEXT "")
-
-##############################################################################
-# handle input parameters to script.
-#BUILD_GENERATOR - which CMake generator to use, required
-#INSTALLDIR - HDF5-1.10.0 root folder
-#CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo
-#CTEST_SOURCE_NAME - name of source folder; HDF5-1.10.0
-#STATIC_ONLY - Default is YES
-#FORTRAN_LIBRARIES - Default is NO
-#JAVA_LIBRARIES - Default is NO
-#NO_MAC_FORTRAN - set to TRUE to allow shared libs on a Mac
-if (DEFINED CTEST_SCRIPT_ARG)
- # transform ctest script arguments of the form
- # script.ctest,var1=value1,var2=value2
- # to variables with the respective names set to the respective values
- string (REPLACE "," ";" script_args "${CTEST_SCRIPT_ARG}")
- foreach (current_var ${script_args})
- if ("${current_var}" MATCHES "^([^=]+)=(.+)$")
- set ("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}")
- endif ()
- endforeach ()
-endif ()
-
-# build generator must be defined
-if (NOT DEFINED BUILD_GENERATOR)
- message (FATAL_ERROR "BUILD_GENERATOR must be defined - Unix, VS2017, or VS201764, VS2015, VS201564, VS2013, VS201364")
-endif ()
-
-###################################################################
-### Following Line is one of [Release, RelWithDebInfo, Debug] #####
-set (CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}")
-###################################################################
-
-if (NOT DEFINED INSTALLDIR)
- if (WIN32)
- set (INSTALLDIR "C:/Program Files/HDF_Group/HDF5/${CTEST_SOURCE_VERSION}")
- else ()
- set (INSTALLDIR "${CTEST_SCRIPT_DIRECTORY}/HDF_Group/HDF5/${CTEST_SOURCE_VERSION}")
- endif ()
-endif ()
-if (NOT DEFINED CTEST_CONFIGURATION_TYPE)
- set (CTEST_CONFIGURATION_TYPE "Release")
-endif ()
-if (NOT DEFINED CTEST_SOURCE_NAME)
- set (CTEST_SOURCE_NAME "hdf5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}")
-endif ()
-if (NOT DEFINED STATIC_ONLY)
- set (STATICONLYLIBRARIES "YES")
-else ()
- set (STATICONLYLIBRARIES "NO")
-endif ()
-if (NOT DEFINED FORTRAN_LIBRARIES)
- set (FORTRANLIBRARIES "NO")
-else ()
- set(FORTRANLIBRARIES "YES")
-endif ()
-if (NOT DEFINED JAVA_LIBRARIES)
- set (JAVALIBRARIES "NO")
-else ()
- set (JAVALIBRARIES "YES")
-endif ()
-
-set (CTEST_BINARY_NAME "build")
-set (CTEST_DASHBOARD_ROOT "${CTEST_SCRIPT_DIRECTORY}")
-if (WIN32)
- set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_SOURCE_NAME}")
- set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_BINARY_NAME}")
-else ()
- set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_SOURCE_NAME}")
- set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_BINARY_NAME}")
-endif ()
-
-###################################################################
-######### Following describes compiler ############
-if (WIN32)
- set (SITE_OS_NAME "Windows")
- set (SITE_OS_VERSION "WIN7")
- if (${BUILD_GENERATOR} STREQUAL "VS201764") - set (CTEST_CMAKE_GENERATOR "Visual Studio 15 2017 Win64") - set (SITE_OS_BITS "64") - set (SITE_COMPILER_NAME "vs2017") - set (SITE_COMPILER_VERSION "15") - elseif (${BUILD_GENERATOR} STREQUAL "VS2017") - set (CTEST_CMAKE_GENERATOR "Visual Studio 15 2017") - set (SITE_OS_BITS "32") - set (SITE_COMPILER_NAME "vs2017") - set (SITE_COMPILER_VERSION "15") - elseif (${BUILD_GENERATOR} STREQUAL "VS201564") - set (CTEST_CMAKE_GENERATOR "Visual Studio 14 2015 Win64") - set (SITE_OS_BITS "64") - set (SITE_COMPILER_NAME "vs2015") - set (SITE_COMPILER_VERSION "14") - elseif (${BUILD_GENERATOR} STREQUAL "VS2015") - set (CTEST_CMAKE_GENERATOR "Visual Studio 14 2015") - set (SITE_OS_BITS "32") - set (SITE_COMPILER_NAME "vs2015") - set (SITE_COMPILER_VERSION "14") - elseif (${BUILD_GENERATOR} STREQUAL "VS201364") - set (CTEST_CMAKE_GENERATOR "Visual Studio 12 2013 Win64") - set (SITE_OS_BITS "64") - set (SITE_COMPILER_NAME "vs2013") - set (SITE_COMPILER_VERSION "12") - elseif (${BUILD_GENERATOR} STREQUAL "VS2013") - set (CTEST_CMAKE_GENERATOR "Visual Studio 12 2013") - set (SITE_OS_BITS "32") - set (SITE_COMPILER_NAME "vs2013") - set (SITE_COMPILER_VERSION "12") - elseif (${BUILD_GENERATOR} STREQUAL "VS201264") - set (CTEST_CMAKE_GENERATOR "Visual Studio 11 2012 Win64") - set (SITE_OS_BITS "64") - set (SITE_COMPILER_NAME "vs2012") - set (SITE_COMPILER_VERSION "11") - elseif (${BUILD_GENERATOR} STREQUAL "VS2012") - set (CTEST_CMAKE_GENERATOR "Visual Studio 11 2012") - set (SITE_OS_BITS "32") - set (SITE_COMPILER_NAME "vs2012") - set (SITE_COMPILER_VERSION "11") +# VS2015 * Visual Studio 14 2015 +# VS201564 * Visual Studio 14 2015 Win64 +# VS2013 * Visual Studio 12 2013 +# VS201364 * Visual Studio 12 2013 Win64 +# +# INSTALLDIR - root folder where hdf5 is installed +# CTEST_CONFIGURATION_TYPE - Release, Debug, etc +# CTEST_SOURCE_NAME - source folder +############################################################################## + +set (CTEST_SOURCE_VERSION "1.13.0") +set (CTEST_SOURCE_VERSEXT "") + +############################################################################## +# handle input parameters to script. +#BUILD_GENERATOR - which CMake generator to use, required +#INSTALLDIR - HDF5-1.13.x root folder +#CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo +#CTEST_SOURCE_NAME - name of source folder; HDF5-1.13.x +#MODEL - CDash group name +#HPC - run alternate configurations for HPC machines; sbatch, bsub, raybsub, qsub +#MPI - enable MPI +if (DEFINED CTEST_SCRIPT_ARG) + # transform ctest script arguments of the form + # script.ctest,var1=value1,var2=value2 + # to variables with the respective names set to the respective values + string (REPLACE "," ";" script_args "${CTEST_SCRIPT_ARG}") + foreach (current_var ${script_args}) + if ("${current_var}" MATCHES "^([^=]+)=(.+)$") + set ("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}") + endif () + endforeach () +endif () + +#HPC - run alternate configurations for HPC machines +if (DEFINED HPC) + set (BUILD_GENERATOR "Unix") +endif () + +# build generator must be defined +if (NOT DEFINED BUILD_GENERATOR) + message (FATAL_ERROR "BUILD_GENERATOR must be defined - Unix, VS2017, or VS201764, VS2015, VS201564, VS2013, VS201364") +endif () + +################################################################### +### Following Line is one of [Release, RelWithDebInfo, Debug] ##### +### (default use command line -C value) +set (CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}") +################################################################### + +if (NOT DEFINED INSTALLDIR) + if (WIN32) + set (INSTALLDIR "C:/Program Files/HDF_Group/HDF5/${CTEST_SOURCE_VERSION}") + else () + set (INSTALLDIR "${CTEST_SCRIPT_DIRECTORY}/HDF_Group/HDF5/${CTEST_SOURCE_VERSION}") + endif () +endif () +if (NOT DEFINED CTEST_CONFIGURATION_TYPE) + set (CTEST_CONFIGURATION_TYPE "Release") +endif () +if (NOT DEFINED CTEST_SOURCE_NAME) + set (CTEST_SOURCE_NAME "hdf5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}") +endif () + +set (CTEST_BINARY_NAME "build") +set (CTEST_DASHBOARD_ROOT "${CTEST_SCRIPT_DIRECTORY}") +if (WIN32 AND NOT MINGW) + set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_SOURCE_NAME}") + set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_BINARY_NAME}") +else () + set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_SOURCE_NAME}") + set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_BINARY_NAME}") +endif () + +################################################################### +######### Following describes compiler ############ +if (NOT DEFINED HPC) + if (NOT DEFINED BUILD_GENERATOR) + message (FATAL_ERROR "BUILD_GENERATOR must be defined - Unix, VS2017, or VS201764, VS2015, VS201564, VS2013, VS201364") + endif () + if (WIN32 AND NOT MINGW) + set (SITE_OS_NAME "Windows") + set (SITE_OS_VERSION "WIN10") + if (BUILD_GENERATOR STREQUAL "VS201964") + set (CTEST_CMAKE_GENERATOR "Visual Studio 16 2019") + set (CMAKE_GENERATOR_ARCHITECTURE "x64") + set (SITE_OS_BITS "64") + set (SITE_COMPILER_NAME "vs2019") + set (SITE_COMPILER_VERSION "16") + elseif (BUILD_GENERATOR STREQUAL "VS2019") + set (CTEST_CMAKE_GENERATOR "Visual Studio 16 2019") + set (CMAKE_GENERATOR_ARCHITECTURE "Win32") + set (SITE_OS_BITS "32") + set (SITE_COMPILER_NAME "vs2019") + set (SITE_COMPILER_VERSION "16") + elseif (BUILD_GENERATOR STREQUAL "VS201764") + set (CTEST_CMAKE_GENERATOR "Visual Studio 15 2017 Win64") + set (SITE_OS_BITS "64") + set (SITE_COMPILER_NAME "vs2017") + set (SITE_COMPILER_VERSION "15") + elseif (BUILD_GENERATOR STREQUAL "VS2017") + set (CTEST_CMAKE_GENERATOR "Visual Studio 15 2017") + set (SITE_OS_BITS "32") + set (SITE_COMPILER_NAME "vs2017") + set (SITE_COMPILER_VERSION "15") + elseif (BUILD_GENERATOR STREQUAL "VS201564") + set (CTEST_CMAKE_GENERATOR "Visual Studio 14 2015 Win64") + set (SITE_OS_BITS "64") + set (SITE_COMPILER_NAME "vs2015") + set (SITE_COMPILER_VERSION "14") + elseif (BUILD_GENERATOR STREQUAL "VS2015") + set (CTEST_CMAKE_GENERATOR "Visual Studio 14 2015") + set (SITE_OS_BITS "32") + set (SITE_COMPILER_NAME "vs2015") + set (SITE_COMPILER_VERSION "14") + elseif (BUILD_GENERATOR STREQUAL "VS201364") + set (CTEST_CMAKE_GENERATOR "Visual Studio 12 2013 Win64") + set (SITE_OS_BITS "64") + set (SITE_COMPILER_NAME "vs2013") + set (SITE_COMPILER_VERSION "12") + elseif (BUILD_GENERATOR STREQUAL "VS2013") + set (CTEST_CMAKE_GENERATOR "Visual Studio 12 2013") + set (SITE_OS_BITS "32") + set (SITE_COMPILER_NAME "vs2013") + set (SITE_COMPILER_VERSION "12") + elseif (BUILD_GENERATOR STREQUAL "VS201264") + set (CTEST_CMAKE_GENERATOR "Visual Studio 11 2012 Win64") + set (SITE_OS_BITS "64") + set (SITE_COMPILER_NAME "vs2012") + set (SITE_COMPILER_VERSION "11") + elseif (BUILD_GENERATOR STREQUAL "VS2012") + set (CTEST_CMAKE_GENERATOR "Visual Studio 11 2012") + set (SITE_OS_BITS "32") + set (SITE_COMPILER_NAME "vs2012") + set (SITE_COMPILER_VERSION "11") + else () + message (FATAL_ERROR "Invalid BUILD_GENERATOR must be - Unix, VS2017, or VS201764, VS2015, VS201564, VS2013, VS201364") + endif () + ## Set the following to unique id your computer ## + set (CTEST_SITE "WIN7${BUILD_GENERATOR}.XXXX") + else () + set (CTEST_CMAKE_GENERATOR "Unix Makefiles") + ## Set the following to unique id your computer ## + if (APPLE) + set (CTEST_SITE "MAC.XXXX") + else () + set (CTEST_SITE "LINUX.XXXX") + endif () + if (APPLE) + execute_process (COMMAND xcrun --find cc OUTPUT_VARIABLE XCODE_CC OUTPUT_STRIP_TRAILING_WHITESPACE) + execute_process (COMMAND xcrun --find c++ OUTPUT_VARIABLE XCODE_CXX OUTPUT_STRIP_TRAILING_WHITESPACE) + set (ENV{CC} "${XCODE_CC}") + set (ENV{CXX} "${XCODE_CXX}") + set (CTEST_USE_LAUNCHERS 1) + endif () + endif () +else () + set (CTEST_SITE "${SITE_OS_NAME}") + set (CTEST_CMAKE_GENERATOR "Unix Makefiles") +endif () +################################################################### + +################################################################### +##### Following controls CDash submission ##### +#set (LOCAL_SUBMIT "TRUE") +##### Following controls test process ##### +#set (LOCAL_SKIP_TEST "TRUE") +#set (LOCAL_MEMCHECK_TEST "TRUE") +#set (LOCAL_COVERAGE_TEST "TRUE") +##### Following controls cpack command ##### +#set (LOCAL_NO_PACKAGE "TRUE") +##### Following controls source update ##### +#set (LOCAL_UPDATE "TRUE") +set (REPOSITORY_URL "https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5.git") +set (REPOSITORY_BRANCH "develop") + +#uncomment to use a compressed source file: *.tar on linux or mac *.zip on windows +#set(CTEST_USE_TAR_SOURCE "${CTEST_SOURCE_VERSION}") +################################################################### + + +################################################################### + +if (WIN32 AND NOT MINGW) + set (BINFILEBASE "HDF5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}-win${SITE_OS_BITS}") + include (${CTEST_SCRIPT_DIRECTORY}\\HDF5options.cmake) + include (${CTEST_SCRIPT_DIRECTORY}\\CTestScript.cmake) + if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.exe") + file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.exe" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.msi") + file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.msi" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.zip") + file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.zip" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () +else () + set (BINFILEBASE "HDF5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}") + include (${CTEST_SCRIPT_DIRECTORY}/HDF5options.cmake) + if (DEFINED HPC) + include (${CTEST_SOURCE_DIRECTORY}/config/cmake/scripts/HPC/${HPC}-HDF5options.cmake) + endif () + include (${CTEST_SCRIPT_DIRECTORY}/CTestScript.cmake) + if (APPLE) + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.dmg") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.dmg" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.tar.gz") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.sh") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () else () - message (FATAL_ERROR "Invalid BUILD_GENERATOR must be - Unix, VS2017, or VS201764, VS2015, VS201564, VS2013, VS201364") + if (CYGWIN) + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.sh") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.tar.gz") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + else () + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.sh") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.tar.gz") + file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY}) + endif () + endif () endif () -## Set the following to unique id your computer ##
- set (CTEST_SITE "WIN7${BUILD_GENERATOR}.XXXX")
-else ()
- set (CTEST_CMAKE_GENERATOR "Unix Makefiles")
-## Set the following to unique id your computer ##
- if (APPLE)
- set (CTEST_SITE "MAC.XXXX")
- else ()
- set (CTEST_SITE "LINUX.XXXX")
- endif ()
- if (APPLE)
- execute_process (COMMAND xcrun --find cc OUTPUT_VARIABLE XCODE_CC OUTPUT_STRIP_TRAILING_WHITESPACE)
- execute_process (COMMAND xcrun --find c++ OUTPUT_VARIABLE XCODE_CXX OUTPUT_STRIP_TRAILING_WHITESPACE)
- set (ENV{CC} "${XCODE_CC}")
- set (ENV{CXX} "${XCODE_CXX}")
- set (CTEST_USE_LAUNCHERS 1)
- set (RR_WARNINGS_COMMON "-Wno-format-nonliteral -Wno-cast-align -Wno-unused -Wno-unused-variable -Wno-unused-function -Wno-self-assign -Wno-unused-parameter -Wno-sign-compare")
- set (RR_WARNINGS_C "${RR_WARNINGS_COMMON} -Wno-deprecated-declarations -Wno-uninitialized")
- set (RR_WARNINGS_CXX "${RR_WARNINGS_COMMON} -Woverloaded-virtual -Wshadow -Wwrite-strings -Wc++11-compat")
- set (RR_FLAGS_COMMON "-g -O0 -fstack-protector-all -D_FORTIFY_SOURCE=2")
- set (RR_FLAGS_C "${RR_FLAGS_COMMON}")
- set (RR_FLAGS_CXX "${RR_FLAGS_COMMON}")
- set (ENV{CFLAGS} "${RR_WARNINGS_C} ${RR_FLAGS_C}")
- set (ENV{CXXFLAGS} "${RR_WARNINGS_CXX} ${RR_FLAGS_CXX}")
- endif ()
-endif ()
-###################################################################
-
-###################################################################
-######### Following is for submission to CDash ############
-###################################################################
-set (MODEL "Experimental")
-###################################################################
-
-###################################################################
-##### Following controls CDash submission #####
-#set (LOCAL_SUBMIT "TRUE")
-##### Following controls test process #####
-#set (LOCAL_SKIP_TEST "TRUE")
-#set (LOCAL_MEMCHECK_TEST "TRUE")
-#set (LOCAL_COVERAGE_TEST "TRUE")
-##### Following controls cpack command #####
-#set (LOCAL_NO_PACKAGE "TRUE")
-##### Following controls source update #####
-#set (LOCAL_UPDATE "TRUE")
-set (REPOSITORY_URL "https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5.git")
-set (REPOSITORY_BRANCH "develop")
-
-#uncomment to use a compressed source file: *.tar on linux or mac *.zip on windows
-#set(CTEST_USE_TAR_SOURCE "${CTEST_SOURCE_VERSION}")
-###################################################################
-
-###################################################################
-if (${STATICONLYLIBRARIES})
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF")
- ######### Following describes computer ############
- ## following is optional to describe build ##
- set (SITE_BUILDNAME_SUFFIX "STATIC")
-endif ()
-###################################################################
-#### fortran ####
-if (${FORTRANLIBRARIES})
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=ON")
- ### enable Fortran 2003 depends on HDF5_BUILD_FORTRAN
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_F2003:BOOL=ON")
-else ()
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=OFF")
- ### enable Fortran 2003 depends on HDF5_BUILD_FORTRAN
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_F2003:BOOL=OFF")
-endif ()
-#### java ####
-if (${JAVALIBRARIES})
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_JAVA:BOOL=ON")
-else ()
- set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_JAVA:BOOL=OFF")
-endif ()
-
-### change install prefix
-set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_INSTALL_PREFIX:PATH=${INSTALLDIR}")
-set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCTEST_CONFIGURATION_TYPE:STRING=$ENV{CMAKE_CONFIG_TYPE}")
-
-###################################################################
-
-if (WIN32)
- set (BINFILEBASE "HDF5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}-win${SITE_OS_BITS}")
- include (${CTEST_SCRIPT_DIRECTORY}\\HDF5options.cmake)
- include (${CTEST_SCRIPT_DIRECTORY}\\CTestScript.cmake)
- if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.exe")
- file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.exe" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.msi")
- file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.msi" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.zip")
- file (COPY "${CTEST_BINARY_DIRECTORY}\\${BINFILEBASE}.zip" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
-else ()
- set (BINFILEBASE "HDF5-${CTEST_SOURCE_VERSION}${CTEST_SOURCE_VERSEXT}")
- include (${CTEST_SCRIPT_DIRECTORY}/HDF5options.cmake)
- include (${CTEST_SCRIPT_DIRECTORY}/CTestScript.cmake)
- if (APPLE)
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.dmg")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.dmg" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.tar.gz")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.sh")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Darwin.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- else ()
- if (CYGWIN)
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.sh")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.tar.gz")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-CYGWIN.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- else ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.sh")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.sh" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- if (EXISTS "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.tar.gz")
- file (COPY "${CTEST_BINARY_DIRECTORY}/${BINFILEBASE}-Linux.tar.gz" DESTINATION ${CTEST_SCRIPT_DIRECTORY})
- endif ()
- endif ()
- endif ()
-endif ()
+endif () diff --git a/config/cmake/scripts/HDF5options.cmake b/config/cmake/scripts/HDF5options.cmake index b090434..f132234 100755..100644 --- a/config/cmake/scripts/HDF5options.cmake +++ b/config/cmake/scripts/HDF5options.cmake @@ -17,36 +17,90 @@ ### uncomment/comment and change the following lines for other configuration options ############################################################################################# +#### maximum parallel processor count for build and test #### +#set (MAX_PROC_COUNT 8) + +############################################################################################# #### alternate toolsets #### -#set(CMAKE_GENERATOR_TOOLSET "Intel C++ Compiler 17.0") +#set (CMAKE_GENERATOR_TOOLSET "Intel C++ Compiler 17.0") + +############################################################################################# +#### Only build static libraries #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF") +#### Only build shared libraries #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DONLY_SHARED_LIBS:BOOL=OFF") +#### Add PIC option on linux/mac #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_ANSI_CFLAGS:STRING=-fPIC") + +############################################################################################# +#### fortran enabled #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=ON") +#### fortran disabled #### +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=OFF") + +############################################################################################# +#### java enabled #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_JAVA:BOOL=ON") +#### java disabled #### +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_JAVA:BOOL=OFF") + +############################################################################################# +### change install prefix (default use INSTALLDIR value) +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_INSTALL_PREFIX:PATH=${INSTALLDIR}") ############################################################################################# #### ext libraries #### ### ext libs from tgz -set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRING=TGZ -DTGZPATH:PATH=${CTEST_SCRIPT_DIRECTORY}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRING=TGZ -DTGZPATH:PATH=${CTEST_SCRIPT_DIRECTORY}") ### ext libs from git -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRING=GIT") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRING=GIT") ### ext libs on system -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DZLIB_LIBRARY:FILEPATH=some_location/lib/zlib.lib -DZLIB_INCLUDE_DIR:PATH=some_location/include") -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSZIP_LIBRARY:FILEPATH=some_location/lib/szlib.lib -DSZIP_INCLUDE_DIR:PATH=some_location/include") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRING=NO") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DZLIB_LIBRARY:FILEPATH=some_location/lib/zlib.lib -DZLIB_INCLUDE_DIR:PATH=some_location/include") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSZIP_LIBRARY:FILEPATH=some_location/lib/szlib.lib -DSZIP_INCLUDE_DIR:PATH=some_location/include") + +### disable using ext zlib +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=OFF") +### disable using ext szip +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_SZIP_SUPPORT:BOOL=OFF") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_SZIP_ENCODING:BOOL=OFF") -### disable ext zlib building -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=OFF") -### disable ext szip building -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_SZIP_SUPPORT:BOOL=OFF") -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_SZIP_ENCODING:BOOL=OFF") +#### package examples #### +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACK_EXAMPLES:BOOL=ON -DHDF5_EXAMPLES_COMPRESSED:STRING=HDF5Examples-1.14.1-Source.tar.gz -DHDF5_EXAMPLES_COMPRESSED_DIR:PATH=${CTEST_SCRIPT_DIRECTORY}") + +############################################################################################# +### enable parallel builds +if (DEFINED MPI) + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_PARALLEL:BOOL=ON") + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_CPP_LIB:BOOL=OFF") + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_JAVA:BOOL=OFF") + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_THREADSAFE:BOOL=OFF") +endif() +############################################################################################# +### enable thread-safety builds + +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_THREADSAFE:BOOL=ON") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_PARALLEL:BOOL=OFF") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_CPP_LIB:BOOL=OFF") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_FORTRAN:BOOL=OFF") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_BUILD_HL_LIB:BOOL=OFF") ############################################################################################# ### disable test program builds -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_TESTING:BOOL=OFF") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_TESTING:BOOL=OFF") ############################################################################################# ### disable packaging -#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_NO_PACKAGES:BOOL=ON") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_NO_PACKAGES:BOOL=ON") ### Create install package with external libraries (szip, zlib) -set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACKAGE_EXTLIBS:BOOL=ON") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACKAGE_EXTLIBS:BOOL=ON") + +############################################################################################# +### use a toolchain file + +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_TOOLCHAIN_FILE:STRING=config/toolchain/intel.cmake") ############################################################################################# diff --git a/config/cmake/scripts/HPC/bsub-HDF5options.cmake b/config/cmake/scripts/HPC/bsub-HDF5options.cmake new file mode 100644 index 0000000..7473e8a --- /dev/null +++ b/config/cmake/scripts/HPC/bsub-HDF5options.cmake @@ -0,0 +1,31 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +############################################################################################# +#### Change default configuration of options in config/cmake/cacheinit.cmake file ### +#### format: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ") ### +############################################################################################# +if (DEFINED MPI) + # maximum parallel processor count for build and test #### + set (MAX_PROC_COUNT 8) +endif() +############################################################################################# +### options to run test scripts in batch commands +set (LOCAL_BATCH_SCRIPT_COMMAND "bsub") +set (LOCAL_BATCH_TEST "TRUE") +set (LOCAL_BATCH_SCRIPT_NAME "ctestS.lsf") +set (LOCAL_BATCH_SCRIPT_PARALLEL_NAME "ctestP.lsf") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_TEST:BOOL=ON") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_NAME:STRING=${LOCAL_BATCH_SCRIPT_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_PARALLEL_NAME:STRING=${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_EXECUTABLE:STRING=srun") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_NUMPROC_FLAG:STRING=-n") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_MAX_NUMPROCS:STRING=6") diff --git a/config/cmake/scripts/HPC/qsub-HDF5options.cmake b/config/cmake/scripts/HPC/qsub-HDF5options.cmake new file mode 100644 index 0000000..34eba1b --- /dev/null +++ b/config/cmake/scripts/HPC/qsub-HDF5options.cmake @@ -0,0 +1,42 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +############################################################################################# +#### Change default configuration of options in config/cmake/cacheinit.cmake file ### +#### format: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ") ### +############################################################################################# +if (DEFINED MPI) + # maximum parallel processor count for build and test #### + set (MAX_PROC_COUNT 8) +endif() +############################################################################################# +### options to run test scripts in batch commands +set (LOCAL_BATCH_SCRIPT_NAME "ctest.qsub") +set (LOCAL_BATCH_SCRIPT_PARALLEL_NAME "ctest.qsub") +if (DEFINED KNL) + ### some additions and alternatives to cross compile on haswell for knl + set (COMPUTENODE_HWCOMPILE_MODULE "craype-mic-knl") + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_TOOLCHAIN_FILE:STRING=config/toolchain/crayle.cmake") +endif () +set (LOCAL_BATCH_SCRIPT_COMMAND "qsub") +set (LOCAL_BATCH_TEST "TRUE") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_TEST:BOOL=ON") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_NAME:STRING=${LOCAL_BATCH_SCRIPT_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_PARALLEL_NAME:STRING=${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_EXECUTABLE:STRING=aprun") +# Option to suppress writing job statistics; to avoid issues with h5diff comparisons. +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_PREFLAGS:STRING=-q") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_NUMPROC_FLAG:STRING=-n") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_MAX_NUMPROCS:STRING=6") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DACCOUNT_ID:STRING=${LOCAL_BATCH_SCRIPT_ARGS}") + +############################################################################################# +############################################################################################# diff --git a/config/cmake/scripts/HPC/raybsub-HDF5options.cmake b/config/cmake/scripts/HPC/raybsub-HDF5options.cmake new file mode 100644 index 0000000..fa1ec4a --- /dev/null +++ b/config/cmake/scripts/HPC/raybsub-HDF5options.cmake @@ -0,0 +1,32 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +############################################################################################# +#### Change default configuration of options in config/cmake/cacheinit.cmake file ### +#### format: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ") ### +############################################################################################# +if (DEFINED MPI) + # maximum parallel processor count for build and test #### + set (MAX_PROC_COUNT 8) +endif() +############################################################################################# +### options to run test scripts in batch commands +set (LOCAL_BATCH_SCRIPT_COMMAND "raybsub") +set (LOCAL_BATCH_TEST "TRUE") +set (LOCAL_BATCH_SCRIPT_NAME "ray_ctestS.lsf") +set (LOCAL_BATCH_SCRIPT_PARALLEL_NAME "ray_ctestP.lsf") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_TEST:BOOL=ON") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_COMMAND:STRING=${LOCAL_BATCH_SCRIPT_COMMAND}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_NAME:STRING=${LOCAL_BATCH_SCRIPT_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_PARALLEL_NAME:STRING=${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_EXECUTABLE:STRING=mpirun") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_NUMPROC_FLAG:STRING=-np") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_MAX_NUMPROCS:STRING=6") diff --git a/config/cmake/scripts/HPC/sbatch-HDF5options.cmake b/config/cmake/scripts/HPC/sbatch-HDF5options.cmake new file mode 100644 index 0000000..3205a1c --- /dev/null +++ b/config/cmake/scripts/HPC/sbatch-HDF5options.cmake @@ -0,0 +1,43 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +############################################################################################# +#### Change default configuration of options in config/cmake/cacheinit.cmake file ### +#### format: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ") ### +############################################################################################# +if (DEFINED MPI) + # maximum parallel processor count for build and test #### + set (MAX_PROC_COUNT 8) +endif() +############################################################################################# +### options to run test scripts in batch commands +if (DEFINED KNL) + ### some additions and alternatives to cross compile on haswell for knl + set (COMPILENODE_HWCOMPILE_MODULE "craype-haswell") + set (COMPUTENODE_HWCOMPILE_MODULE "craype-mic-knl") + set (LOCAL_BATCH_SCRIPT_NAME "knl_ctestS.sl") + set (LOCAL_BATCH_SCRIPT_PARALLEL_NAME "knl_ctestP.sl") + set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_TOOLCHAIN_FILE:STRING=config/toolchain/crayle.cmake") +else () + set (LOCAL_BATCH_SCRIPT_NAME "ctestS.sl") + set (LOCAL_BATCH_SCRIPT_PARALLEL_NAME "ctestP.sl") +endif () +set (LOCAL_BATCH_SCRIPT_COMMAND "sbatch") +set (LOCAL_BATCH_TEST "TRUE") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_TEST:BOOL=ON") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_NAME:STRING=${LOCAL_BATCH_SCRIPT_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DLOCAL_BATCH_SCRIPT_PARALLEL_NAME:STRING=${LOCAL_BATCH_SCRIPT_PARALLEL_NAME}") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_EXECUTABLE:STRING=srun") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_NUMPROC_FLAG:STRING=-n") +set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DMPIEXEC_MAX_NUMPROCS:STRING=6") + +############################################################################################# +############################################################################################# diff --git a/config/cmake/userblockTest.cmake b/config/cmake/userblockTest.cmake index 9af7e5b..c02669d 100644 --- a/config/cmake/userblockTest.cmake +++ b/config/cmake/userblockTest.cmake @@ -20,7 +20,7 @@ if (NOT TEST_GET_PROGRAM) message (FATAL_ERROR "Require TEST_GET_PROGRAM getub to be defined") endif () if (NOT TEST_FOLDER) - message ( FATAL_ERROR "Require TEST_FOLDER to be defined") + message (FATAL_ERROR "Require TEST_FOLDER to be defined") endif () if (NOT TEST_HFILE) message (FATAL_ERROR "Require TEST_HFILE the hdf file to be defined") @@ -54,15 +54,15 @@ if (TEST_CHECKUB STREQUAL "YES") # 'tellub' calls H5Fget_user_block to get the size # of the user block #s2=`$JAM_BIN/tellub $origfile` - EXECUTE_PROCESS ( - COMMAND ${TEST_PROGRAM} ${TEST_OFILE} + execute_process ( + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_OFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_HFILE}.len.txt OUTPUT_VARIABLE TEST_OUT ERROR_VARIABLE TEST_ERROR ) - if (NOT ${TEST_RESULT} STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} ${TEST_OFILE} is: ${TEST_ERROR}") endif () file (READ ${TEST_HFILE}.len.txt TEST_O_STRING_LEN) @@ -70,10 +70,10 @@ if (TEST_CHECKUB STREQUAL "YES") math( EXPR TEST_STRING_SIZE "${TEST_U_STRING_LEN} + ${TEST_O_STRING_LEN}" ) - if (NOT TEST_O_STRING_LEN STREQUAL "0") + if (TEST_O_STRING_LEN) #$JAM_BIN/getub -c $s2 $origfile > $cmpfile - EXECUTE_PROCESS ( - COMMAND ${TEST_GET_PROGRAM} -c ${TEST_O_STRING_LEN} ${TEST_OFILE} + execute_process ( + COMMAND ${TEST_EMULATOR} ${TEST_GET_PROGRAM} -c ${TEST_O_STRING_LEN} ${TEST_OFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_HFILE}-ub.cmp @@ -90,8 +90,8 @@ if (TEST_CHECKUB STREQUAL "YES") endif () #$JAM_BIN/getub -c $size $hfile > $tfile - EXECUTE_PROCESS ( - COMMAND ${TEST_GET_PROGRAM} -c ${TEST_STRING_SIZE} ${TEST_HFILE} + execute_process ( + COMMAND ${TEST_EMULATOR} ${TEST_GET_PROGRAM} -c ${TEST_STRING_SIZE} ${TEST_HFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_HFILE}.cmp @@ -101,31 +101,31 @@ if (TEST_CHECKUB STREQUAL "YES") ) # now compare the outputs - EXECUTE_PROCESS ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_HFILE}-ub.cmp ${TEST_HFILE}.cmp + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_HFILE}-ub.cmp ${TEST_HFILE}.cmp RESULT_VARIABLE TEST_RESULT ) message (STATUS "COMPARE Result: ${TEST_RESULT}: ${TEST_STRING_SIZE}=${TEST_U_STRING_LEN}+${TEST_O_STRING_LEN}") # if the return value is !=${TEST_EXPECT} bail out - if (NOT ${TEST_RESULT} STREQUAL ${TEST_EXPECT}) + if (NOT TEST_RESULT EQUAL TEST_EXPECT) message (FATAL_ERROR "Failed: The output of ${TEST_HFILE}-ub did not match ${TEST_HFILE}.\n${TEST_ERROR}") endif () else () # call 'ubsize' to get the size of the user block #ubsize=`$JAM_BIN/tellub $hfile` - EXECUTE_PROCESS ( - COMMAND ${TEST_PROGRAM} ${TEST_HFILE} + execute_process ( + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_HFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_H_STRING_LEN OUTPUT_VARIABLE TEST_OUT ERROR_VARIABLE TEST_ERROR ) - if (NOT TEST_H_STRING_LEN STREQUAL "0") + if (TEST_H_STRING_LEN) message (FATAL_ERROR "Failed: The output of ${TEST_HFILE} was NOT empty") endif () endif () # everything went fine... -message ("Passed: The output of CHECK matched expectation") +message (STATUS "Passed: The output of CHECK matched expectation") diff --git a/config/cmake/vfdTest.cmake b/config/cmake/vfdTest.cmake index 67a2566..c07d005 100644 --- a/config/cmake/vfdTest.cmake +++ b/config/cmake/vfdTest.cmake @@ -17,32 +17,32 @@ if (NOT TEST_PROGRAM) message (FATAL_ERROR "Require TEST_PROGRAM to be defined") endif () if (NOT TEST_FOLDER) - message ( FATAL_ERROR "Require TEST_FOLDER to be defined") + message (FATAL_ERROR "Require TEST_FOLDER to be defined") endif () if (NOT TEST_VFD) message (FATAL_ERROR "Require TEST_VFD to be defined") endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) endif () # if there is not an error reference file add the error output to the stdout file -if (NOT TEST_ERRREF) - set (ERROR_APPEND 1) -endif () +#if (NOT TEST_ERRREF) +# set (ERROR_APPEND 1) +#endif () -message (STATUS "USING ${TEST_VFD} ON COMMAND: ${TEST_PROGRAM} ${TEST_ARGS}") +message (STATUS "USING ${TEST_VFD} ON COMMAND: ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS}") set (ENV{HDF5_DRIVER} "${TEST_VFD}") # run the test program, capture the stdout/stderr and the result var execute_process ( - COMMAND ${TEST_PROGRAM} ${TEST_ARGS} + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_OUTPUT}_${TEST_VFD}.out @@ -54,18 +54,18 @@ execute_process ( message (STATUS "COMMAND Result: ${TEST_RESULT}") # if the .err file exists and ERRROR_APPEND is enabled -if (ERROR_APPEND AND EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.err) +if (ERROR_APPEND AND EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.err TEST_STREAM) file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out "${TEST_STREAM}") endif () # if the return value is !=${TEST_EXPECT} bail out -if (NOT ${TEST_RESULT} STREQUAL ${TEST_EXPECT}) +if (NOT TEST_RESULT EQUAL TEST_EXPECT) if (NOT TEST_NOERRDISPLAY) - if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out) + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out TEST_STREAM) - message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}") - endif () + message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}") + endif () endif () message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != ${TEST_EXPECT}.\n${TEST_ERROR}") endif () @@ -73,4 +73,4 @@ endif () message (STATUS "COMMAND Error: ${TEST_ERROR}") # everything went fine... -message ("Passed: The ${TEST_PROGRAM} program used vfd ${TEST_VFD}") +message (STATUS "Passed: The ${TEST_PROGRAM} program used vfd ${TEST_VFD}") diff --git a/config/cmake/volTest.cmake b/config/cmake/volTest.cmake new file mode 100644 index 0000000..e735109 --- /dev/null +++ b/config/cmake/volTest.cmake @@ -0,0 +1,76 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# volTest.cmake executes a command and captures the output in a file. Command uses specified VOL. +# Exit status of command can also be compared. + +# arguments checking +if (NOT TEST_PROGRAM) + message (FATAL_ERROR "Require TEST_PROGRAM to be defined") +endif () +if (NOT TEST_FOLDER) + message (FATAL_ERROR "Require TEST_FOLDER to be defined") +endif () +if (NOT TEST_VOL) + message (FATAL_ERROR "Require TEST_VOL to be defined") +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) +endif () + +# if there is not an error reference file add the error output to the stdout file +#if (NOT TEST_ERRREF) +# set (ERROR_APPEND 1) +#endif () + +message (STATUS "USING ${TEST_VOL} ON COMMAND: ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS}") + +set (ENV{HDF5_VOL_CONNECTOR} "${TEST_VOL}") + +# run the test program, capture the stdout/stderr and the result var +execute_process ( + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS} + WORKING_DIRECTORY ${TEST_FOLDER} + RESULT_VARIABLE TEST_RESULT + OUTPUT_FILE ${TEST_OUTPUT}.out + ERROR_FILE ${TEST_OUTPUT}.err + OUTPUT_VARIABLE TEST_OUT + ERROR_VARIABLE TEST_ERROR +) + +message (STATUS "COMMAND Result: ${TEST_RESULT}") + +# if the .err file exists and ERRROR_APPEND is enabled +if (ERROR_APPEND AND EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT}.out "${TEST_STREAM}") +endif () + +# if the return value is !=${TEST_EXPECT} bail out +if (NOT TEST_RESULT EQUAL TEST_EXPECT) + if (NOT TEST_NOERRDISPLAY) + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.out") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.out TEST_STREAM) + message (STATUS "Output USING ${TEST_VOL}:\n${TEST_STREAM}") + endif () + endif () + message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != ${TEST_EXPECT}.\n${TEST_ERROR}") +endif () + +message (STATUS "COMMAND Error: ${TEST_ERROR}") + +# everything went fine... +message (STATUS "Passed: The ${TEST_PROGRAM} program used vol ${TEST_VOL}") diff --git a/config/cmake/wait_H5Tinit.cmake b/config/cmake/wait_H5Tinit.cmake new file mode 100644 index 0000000..b778765 --- /dev/null +++ b/config/cmake/wait_H5Tinit.cmake @@ -0,0 +1,11 @@ +cmake_minimum_required (VERSION 3.12) + +message(STATUS "Check for existence of ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c") +execute_process(COMMAND ls ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c RESULT_VARIABLE H5TI_result OUTPUT_QUIET ERROR_QUIET) +while(H5TI_result) + ctest_sleep(30) + message(STATUS "Checking again for existence of ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c") + execute_process(COMMAND ls ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c RESULT_VARIABLE H5TI_result OUTPUT_QUIET ERROR_QUIET) +endwhile(H5TI_result) +file (TOUCH "${HDF5_BINARY_DIR}/H5Tinit_created") +message(STATUS "Found ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c") diff --git a/config/cmake_ext_mod/CTestCustom.cmake b/config/cmake_ext_mod/CTestCustom.cmake index 025bce4..2d72e8d 100644 --- a/config/cmake_ext_mod/CTestCustom.cmake +++ b/config/cmake_ext_mod/CTestCustom.cmake @@ -1,16 +1,17 @@ set (CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS 3000) - + set (CTEST_CUSTOM_WARNING_EXCEPTION ${CTEST_CUSTOM_WARNING_EXCEPTION} - "note.*expected.*void.*but argument is of type.*volatile" - "SZIP.src.*:[ \t]*warning" - "jpeg.src.*:[ \t]*warning" - "POSIX name for this item is deprecated" - "disabling jobserver mode" - "warning.*implicit declaration of function" - "note: expanded from macro" + ".*note.*expected.*void.*but argument is of type.*volatile.*" + ".*src.SZIP.*:[ \t]*warning.*" + ".*src.ZLIB.*:[ \t]*warning.*" + ".*src.JPEG.*:[ \t]*warning.*" + ".*POSIX name for this item is deprecated.*" + ".*disabling jobserver mode.*" + ".*warning.*implicit declaration of function.*" + ".*note: expanded from macro.*" ) - + set (CTEST_CUSTOM_MEMCHECK_IGNORE ${CTEST_CUSTOM_MEMCHECK_IGNORE} ) diff --git a/config/cmake_ext_mod/CheckTypeSize.cmake b/config/cmake_ext_mod/CheckTypeSize.cmake deleted file mode 100644 index c14c2f2..0000000 --- a/config/cmake_ext_mod/CheckTypeSize.cmake +++ /dev/null @@ -1,61 +0,0 @@ -# -# Copyright by The HDF Group. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -# -# -# Check if the type exists and determine size of type. if the type -# exists, the size will be stored to the variable. -# -# CHECK_TYPE_SIZE - macro which checks the size of type -# VARIABLE - variable to store size if the type exists. -# HAVE_${VARIABLE} - does the variable exists or not -# - -macro (HDF_CHECK_TYPE_SIZE TYPE VARIABLE) - set (CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS 1) - if ("HAVE_${VARIABLE}" MATCHES "^HAVE_${VARIABLE}$") - set (MACRO_CHECK_TYPE_SIZE_FLAGS - "-DCHECK_TYPE_SIZE_TYPE=\"${TYPE}\" ${CMAKE_REQUIRED_FLAGS}" - ) - foreach (def HAVE_SYS_TYPES_H HAVE_STDINT_H HAVE_STDDEF_H HAVE_INTTYPES_H) - if ("${def}") - set (MACRO_CHECK_TYPE_SIZE_FLAGS "${MACRO_CHECK_TYPE_SIZE_FLAGS} -D${def}") - endif () - endforeach () - - message (STATUS "Check size of ${TYPE}") - if (CMAKE_REQUIRED_LIBRARIES) - set (CHECK_TYPE_SIZE_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}" - ) - endif () - try_run (${VARIABLE} HAVE_${VARIABLE} - ${CMAKE_BINARY_DIR} - ${HDF_RESOURCES_EXT_DIR}/CheckTypeSize.c - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_TYPE_SIZE_FLAGS} - "${CHECK_TYPE_SIZE_ADD_LIBRARIES}" - OUTPUT_VARIABLE OUTPUT - ) - if (HAVE_${VARIABLE}) - message (STATUS "Check size of ${TYPE} - done") - file (APPEND - ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeOutput.log - "Determining size of ${TYPE} passed with the following output:\n${OUTPUT}\n\n" - ) - else () - message (STATUS "Check size of ${TYPE} - failed") - file (APPEND - ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log - "Determining size of ${TYPE} failed with the following output:\n${OUTPUT}\n\n" - ) - endif () - endif () - set (CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS) -endmacro () diff --git a/config/cmake_ext_mod/ConfigureChecks.cmake b/config/cmake_ext_mod/ConfigureChecks.cmake index 88cd77b..0875aad 100644 --- a/config/cmake_ext_mod/ConfigureChecks.cmake +++ b/config/cmake_ext_mod/ConfigureChecks.cmake @@ -12,19 +12,15 @@ #----------------------------------------------------------------------------- # Include all the necessary files for macros #----------------------------------------------------------------------------- -include (${CMAKE_ROOT}/Modules/CheckFunctionExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFile.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFileCXX.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFiles.cmake) -include (${CMAKE_ROOT}/Modules/CheckLibraryExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckSymbolExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckTypeSize.cmake) -include (${CMAKE_ROOT}/Modules/CheckVariableExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckFortranFunctionExists.cmake) -include (${CMAKE_ROOT}/Modules/TestBigEndian.cmake) -if (CMAKE_CXX_COMPILER AND CMAKE_CXX_COMPILER_LOADED) - include (${CMAKE_ROOT}/Modules/TestForSTDNamespace.cmake) -endif () +include (CheckFunctionExists) +include (CheckIncludeFile) +include (CheckIncludeFiles) +include (CheckLibraryExists) +include (CheckSymbolExists) +include (CheckTypeSize) +include (CheckVariableExists) +include (TestBigEndian) +include (CheckStructHasMember) #----------------------------------------------------------------------------- # APPLE/Darwin setup @@ -33,7 +29,7 @@ if (APPLE) list (LENGTH CMAKE_OSX_ARCHITECTURES ARCH_LENGTH) if (ARCH_LENGTH GREATER 1) set (CMAKE_OSX_ARCHITECTURES "" CACHE STRING "" FORCE) - message(FATAL_ERROR "Building Universal Binaries on OS X is NOT supported by the HDF5 project. This is" + message (FATAL_ERROR "Building Universal Binaries on OS X is NOT supported by the HDF5 project. This is" "due to technical reasons. The best approach would be build each architecture in separate directories" "and use the 'lipo' tool to combine them into a single executable or library. The 'CMAKE_OSX_ARCHITECTURES'" "variable has been set to a blank value which will build the default architecture for this system.") @@ -66,17 +62,17 @@ endmacro () # ---------------------------------------------------------------------- # WINDOWS Hard code Values # ---------------------------------------------------------------------- - set (WINDOWS) -if (WIN32) - if (MINGW) - set (${HDF_PREFIX}_HAVE_MINGW 1) - set (WINDOWS 1) # MinGW tries to imitate Windows - set (CMAKE_REQUIRED_FLAGS "-DWIN32_LEAN_AND_MEAN=1 -DNOGDI=1") - endif () - set (${HDF_PREFIX}_HAVE_WIN32_API 1) - set (CMAKE_REQUIRED_LIBRARIES "ws2_32.lib;wsock32.lib") - if (NOT UNIX AND NOT MINGW) + +if (MINGW) + set (${HDF_PREFIX}_HAVE_MINGW 1) + set (WINDOWS 1) # MinGW tries to imitate Windows + set (CMAKE_REQUIRED_FLAGS "-DWIN32_LEAN_AND_MEAN=1 -DNOGDI=1") + set (${HDF_PREFIX}_HAVE_WINSOCK2_H 1) +endif () + +if (WIN32 AND NOT MINGW) + if (NOT UNIX) set (WINDOWS 1) set (CMAKE_REQUIRED_FLAGS "/DWIN32_LEAN_AND_MEAN=1 /DNOGDI=1") if (MSVC) @@ -86,34 +82,104 @@ if (WIN32) endif () if (WINDOWS) - set (${HDF_PREFIX}_HAVE_STDDEF_H 1) - set (${HDF_PREFIX}_HAVE_SYS_STAT_H 1) - set (${HDF_PREFIX}_HAVE_SYS_TYPES_H 1) + set (HDF5_REQUIRED_LIBRARIES "ws2_32.lib;wsock32.lib") + set (${HDF_PREFIX}_HAVE_WIN32_API 1) set (${HDF_PREFIX}_HAVE_LIBM 1) set (${HDF_PREFIX}_HAVE_STRDUP 1) set (${HDF_PREFIX}_HAVE_SYSTEM 1) set (${HDF_PREFIX}_HAVE_LONGJMP 1) if (NOT MINGW) set (${HDF_PREFIX}_HAVE_GETHOSTNAME 1) + set (${HDF_PREFIX}_HAVE_FUNCTION 1) endif () - if (NOT UNIX AND NOT CYGWIN AND NOT MINGW) + if (NOT UNIX AND NOT CYGWIN) set (${HDF_PREFIX}_HAVE_GETCONSOLESCREENBUFFERINFO 1) + set (${HDF_PREFIX}_GETTIMEOFDAY_GIVES_TZ 1) + set (${HDF_PREFIX}_HAVE_TIMEZONE 1) + set (${HDF_PREFIX}_HAVE_GETTIMEOFDAY 1) + set (${HDF_PREFIX}_HAVE_LIBWS2_32 1) + set (${HDF_PREFIX}_HAVE_LIBWSOCK32 1) endif () - set (${HDF_PREFIX}_HAVE_FUNCTION 1) - set (${HDF_PREFIX}_GETTIMEOFDAY_GIVES_TZ 1) - set (${HDF_PREFIX}_HAVE_TIMEZONE 1) - set (${HDF_PREFIX}_HAVE_GETTIMEOFDAY 1) - if (MINGW) - set (${HDF_PREFIX}_HAVE_WINSOCK2_H 1) - endif () - set (${HDF_PREFIX}_HAVE_LIBWS2_32 1) - set (${HDF_PREFIX}_HAVE_LIBWSOCK32 1) endif () # ---------------------------------------------------------------------- # END of WINDOWS Hard code Values # ---------------------------------------------------------------------- +if (NOT WINDOWS) + TEST_BIG_ENDIAN (${HDF_PREFIX}_WORDS_BIGENDIAN) +endif () + +#----------------------------------------------------------------------------- +# Check IF header file exists and add it to the list. +#----------------------------------------------------------------------------- +macro (CHECK_INCLUDE_FILE_CONCAT FILE VARIABLE) + CHECK_INCLUDE_FILES ("${USE_INCLUDES};${FILE}" ${VARIABLE}) + if (${VARIABLE}) + set (USE_INCLUDES ${USE_INCLUDES} ${FILE}) + endif () +endmacro () + +#----------------------------------------------------------------------------- +# Check for the existence of certain header files +#----------------------------------------------------------------------------- +CHECK_INCLUDE_FILE_CONCAT ("sys/file.h" ${HDF_PREFIX}_HAVE_SYS_FILE_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/ioctl.h" ${HDF_PREFIX}_HAVE_SYS_IOCTL_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/resource.h" ${HDF_PREFIX}_HAVE_SYS_RESOURCE_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/socket.h" ${HDF_PREFIX}_HAVE_SYS_SOCKET_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/stat.h" ${HDF_PREFIX}_HAVE_SYS_STAT_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/time.h" ${HDF_PREFIX}_HAVE_SYS_TIME_H) +CHECK_INCLUDE_FILE_CONCAT ("sys/types.h" ${HDF_PREFIX}_HAVE_SYS_TYPES_H) +CHECK_INCLUDE_FILE_CONCAT ("features.h" ${HDF_PREFIX}_HAVE_FEATURES_H) +CHECK_INCLUDE_FILE_CONCAT ("dirent.h" ${HDF_PREFIX}_HAVE_DIRENT_H) +CHECK_INCLUDE_FILE_CONCAT ("setjmp.h" ${HDF_PREFIX}_HAVE_SETJMP_H) +CHECK_INCLUDE_FILE_CONCAT ("stddef.h" ${HDF_PREFIX}_HAVE_STDDEF_H) +CHECK_INCLUDE_FILE_CONCAT ("stdint.h" ${HDF_PREFIX}_HAVE_STDINT_H) +CHECK_INCLUDE_FILE_CONCAT ("unistd.h" ${HDF_PREFIX}_HAVE_UNISTD_H) + +# Darwin +CHECK_INCLUDE_FILE_CONCAT ("mach/mach_time.h" ${HDF_PREFIX}_HAVE_MACH_MACH_TIME_H) + +# Windows +CHECK_INCLUDE_FILE_CONCAT ("io.h" ${HDF_PREFIX}_HAVE_IO_H) +if (NOT CYGWIN) + CHECK_INCLUDE_FILE_CONCAT ("winsock2.h" ${HDF_PREFIX}_HAVE_WINSOCK2_H) +endif () +CHECK_INCLUDE_FILE_CONCAT ("sys/timeb.h" ${HDF_PREFIX}_HAVE_SYS_TIMEB_H) + +if (CMAKE_SYSTEM_NAME MATCHES "OSF") + CHECK_INCLUDE_FILE_CONCAT ("sys/sysinfo.h" ${HDF_PREFIX}_HAVE_SYS_SYSINFO_H) + CHECK_INCLUDE_FILE_CONCAT ("sys/proc.h" ${HDF_PREFIX}_HAVE_SYS_PROC_H) +else () + set (${HDF_PREFIX}_HAVE_SYS_SYSINFO_H "" CACHE INTERNAL "" FORCE) + set (${HDF_PREFIX}_HAVE_SYS_PROC_H "" CACHE INTERNAL "" FORCE) +endif () + +CHECK_INCLUDE_FILE_CONCAT ("globus/common.h" ${HDF_PREFIX}_HAVE_GLOBUS_COMMON_H) +CHECK_INCLUDE_FILE_CONCAT ("pdb.h" ${HDF_PREFIX}_HAVE_PDB_H) +CHECK_INCLUDE_FILE_CONCAT ("pthread.h" ${HDF_PREFIX}_HAVE_PTHREAD_H) +CHECK_INCLUDE_FILE_CONCAT ("srbclient.h" ${HDF_PREFIX}_HAVE_SRBCLIENT_H) +CHECK_INCLUDE_FILE_CONCAT ("string.h" ${HDF_PREFIX}_HAVE_STRING_H) +CHECK_INCLUDE_FILE_CONCAT ("strings.h" ${HDF_PREFIX}_HAVE_STRINGS_H) +CHECK_INCLUDE_FILE_CONCAT ("stdlib.h" ${HDF_PREFIX}_HAVE_STDLIB_H) +CHECK_INCLUDE_FILE_CONCAT ("memory.h" ${HDF_PREFIX}_HAVE_MEMORY_H) +CHECK_INCLUDE_FILE_CONCAT ("dlfcn.h" ${HDF_PREFIX}_HAVE_DLFCN_H) +CHECK_INCLUDE_FILE_CONCAT ("inttypes.h" ${HDF_PREFIX}_HAVE_INTTYPES_H) +CHECK_INCLUDE_FILE_CONCAT ("netinet/in.h" ${HDF_PREFIX}_HAVE_NETINET_IN_H) +CHECK_INCLUDE_FILE_CONCAT ("netdb.h" ${HDF_PREFIX}_HAVE_NETDB_H) +CHECK_INCLUDE_FILE_CONCAT ("arpa/inet.h" ${HDF_PREFIX}_HAVE_ARPA_INET_H) +# _Bool type support +CHECK_INCLUDE_FILE_CONCAT (stdbool.h ${HDF_PREFIX}_HAVE_STDBOOL_H) + +## Check for non-standard extenstion quadmath.h + +CHECK_INCLUDE_FILES(quadmath.h C_HAVE_QUADMATH) +if (${C_HAVE_QUADMATH}) + set(${HDF_PREFIX}_HAVE_QUADMATH_H 1) +else () + set(${HDF_PREFIX}_HAVE_QUADMATH_H 0) +endif () + if (CYGWIN) set (${HDF_PREFIX}_HAVE_LSEEK64 0) endif () @@ -121,7 +187,7 @@ endif () #----------------------------------------------------------------------------- # Check for the math library "m" #----------------------------------------------------------------------------- -if (NOT WINDOWS) +if (MINGW OR NOT WINDOWS) CHECK_LIBRARY_EXISTS_CONCAT ("m" ceil ${HDF_PREFIX}_HAVE_LIBM) CHECK_LIBRARY_EXISTS_CONCAT ("dl" dlopen ${HDF_PREFIX}_HAVE_LIBDL) CHECK_LIBRARY_EXISTS_CONCAT ("ws2_32" WSAStartup ${HDF_PREFIX}_HAVE_LIBWS2_32) @@ -132,25 +198,17 @@ endif () CHECK_LIBRARY_EXISTS_CONCAT ("ucb" gethostname ${HDF_PREFIX}_HAVE_LIBUCB) # For other tests to use the same libraries -set (CMAKE_REQUIRED_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES} ${LINK_LIBS}) +set (HDF5_REQUIRED_LIBRARIES ${HDF5_REQUIRED_LIBRARIES} ${LINK_LIBS}) set (USE_INCLUDES "") if (WINDOWS) set (USE_INCLUDES ${USE_INCLUDES} "windows.h") endif () -if (NOT WINDOWS) - TEST_BIG_ENDIAN (${HDF_PREFIX}_WORDS_BIGENDIAN) -endif () - # For other specific tests, use this MACRO. macro (HDF_FUNCTION_TEST OTHER_TEST) - if ("${HDF_PREFIX}_${OTHER_TEST}" MATCHES "^${HDF_PREFIX}_${OTHER_TEST}$") + if (NOT DEFINED ${HDF_PREFIX}_${OTHER_TEST}) set (MACRO_CHECK_FUNCTION_DEFINITIONS "-D${OTHER_TEST} ${CMAKE_REQUIRED_FLAGS}") - set (OTHER_TEST_ADD_LIBRARIES) - if (CMAKE_REQUIRED_LIBRARIES) - set (OTHER_TEST_ADD_LIBRARIES "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") - endif () foreach (def HAVE_SYS_TIME_H @@ -170,11 +228,11 @@ macro (HDF_FUNCTION_TEST OTHER_TEST) endif () #message (STATUS "Performing ${OTHER_TEST}") - TRY_COMPILE (${OTHER_TEST} + try_compile (${OTHER_TEST} ${CMAKE_BINARY_DIR} ${HDF_RESOURCES_EXT_DIR}/HDFTests.c - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS} - "${OTHER_TEST_ADD_LIBRARIES}" + COMPILE_DEFINITIONS "${MACRO_CHECK_FUNCTION_DEFINITIONS}" + LINK_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}" OUTPUT_VARIABLE OUTPUT ) if (${OTHER_TEST}) @@ -197,71 +255,6 @@ endmacro () HDF_FUNCTION_TEST (STDC_HEADERS) #----------------------------------------------------------------------------- -# Check IF header file exists and add it to the list. -#----------------------------------------------------------------------------- -macro (CHECK_INCLUDE_FILE_CONCAT FILE VARIABLE) - CHECK_INCLUDE_FILES ("${USE_INCLUDES};${FILE}" ${VARIABLE}) - if (${VARIABLE}) - set (USE_INCLUDES ${USE_INCLUDES} ${FILE}) - endif () -endmacro () - -#----------------------------------------------------------------------------- -# Check for the existence of certain header files -#----------------------------------------------------------------------------- -CHECK_INCLUDE_FILE_CONCAT ("sys/file.h" ${HDF_PREFIX}_HAVE_SYS_FILE_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/ioctl.h" ${HDF_PREFIX}_HAVE_SYS_IOCTL_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/resource.h" ${HDF_PREFIX}_HAVE_SYS_RESOURCE_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/socket.h" ${HDF_PREFIX}_HAVE_SYS_SOCKET_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/stat.h" ${HDF_PREFIX}_HAVE_SYS_STAT_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/time.h" ${HDF_PREFIX}_HAVE_SYS_TIME_H) -CHECK_INCLUDE_FILE_CONCAT ("sys/types.h" ${HDF_PREFIX}_HAVE_SYS_TYPES_H) -CHECK_INCLUDE_FILE_CONCAT ("features.h" ${HDF_PREFIX}_HAVE_FEATURES_H) -CHECK_INCLUDE_FILE_CONCAT ("dirent.h" ${HDF_PREFIX}_HAVE_DIRENT_H) -CHECK_INCLUDE_FILE_CONCAT ("setjmp.h" ${HDF_PREFIX}_HAVE_SETJMP_H) -CHECK_INCLUDE_FILE_CONCAT ("stddef.h" ${HDF_PREFIX}_HAVE_STDDEF_H) -CHECK_INCLUDE_FILE_CONCAT ("stdint.h" ${HDF_PREFIX}_HAVE_STDINT_H) -CHECK_INCLUDE_FILE_CONCAT ("unistd.h" ${HDF_PREFIX}_HAVE_UNISTD_H) - -# IF the c compiler found stdint, check the C++ as well. On some systems this -# file will be found by C but not C++, only do this test IF the C++ compiler -# has been initialized (e.g. the project also includes some c++) -if (${HDF_PREFIX}_HAVE_STDINT_H AND CMAKE_CXX_COMPILER_LOADED) - CHECK_INCLUDE_FILE_CXX ("stdint.h" ${HDF_PREFIX}_HAVE_STDINT_H_CXX) - if (NOT ${HDF_PREFIX}_HAVE_STDINT_H_CXX) - set (${HDF_PREFIX}_HAVE_STDINT_H "" CACHE INTERNAL "Have includes HAVE_STDINT_H") - set (USE_INCLUDES ${USE_INCLUDES} "stdint.h") - endif () -endif () - -# Windows -CHECK_INCLUDE_FILE_CONCAT ("io.h" ${HDF_PREFIX}_HAVE_IO_H) -if (NOT CYGWIN) - CHECK_INCLUDE_FILE_CONCAT ("winsock2.h" ${HDF_PREFIX}_HAVE_WINSOCK2_H) -endif () -CHECK_INCLUDE_FILE_CONCAT ("sys/timeb.h" ${HDF_PREFIX}_HAVE_SYS_TIMEB_H) - -if (CMAKE_SYSTEM_NAME MATCHES "OSF") - CHECK_INCLUDE_FILE_CONCAT ("sys/sysinfo.h" ${HDF_PREFIX}_HAVE_SYS_SYSINFO_H) - CHECK_INCLUDE_FILE_CONCAT ("sys/proc.h" ${HDF_PREFIX}_HAVE_SYS_PROC_H) -else () - set (${HDF_PREFIX}_HAVE_SYS_SYSINFO_H "" CACHE INTERNAL "" FORCE) - set (${HDF_PREFIX}_HAVE_SYS_PROC_H "" CACHE INTERNAL "" FORCE) -endif () - -CHECK_INCLUDE_FILE_CONCAT ("globus/common.h" ${HDF_PREFIX}_HAVE_GLOBUS_COMMON_H) -CHECK_INCLUDE_FILE_CONCAT ("pdb.h" ${HDF_PREFIX}_HAVE_PDB_H) -CHECK_INCLUDE_FILE_CONCAT ("pthread.h" ${HDF_PREFIX}_HAVE_PTHREAD_H) -CHECK_INCLUDE_FILE_CONCAT ("srbclient.h" ${HDF_PREFIX}_HAVE_SRBCLIENT_H) -CHECK_INCLUDE_FILE_CONCAT ("string.h" ${HDF_PREFIX}_HAVE_STRING_H) -CHECK_INCLUDE_FILE_CONCAT ("strings.h" ${HDF_PREFIX}_HAVE_STRINGS_H) -CHECK_INCLUDE_FILE_CONCAT ("stdlib.h" ${HDF_PREFIX}_HAVE_STDLIB_H) -CHECK_INCLUDE_FILE_CONCAT ("memory.h" ${HDF_PREFIX}_HAVE_MEMORY_H) -CHECK_INCLUDE_FILE_CONCAT ("dlfcn.h" ${HDF_PREFIX}_HAVE_DLFCN_H) -CHECK_INCLUDE_FILE_CONCAT ("inttypes.h" ${HDF_PREFIX}_HAVE_INTTYPES_H) -CHECK_INCLUDE_FILE_CONCAT ("netinet/in.h" ${HDF_PREFIX}_HAVE_NETINET_IN_H) - -#----------------------------------------------------------------------------- # Check for large file support #----------------------------------------------------------------------------- @@ -270,7 +263,7 @@ set (LINUX_LFS 0) set (HDF_EXTRA_C_FLAGS) set (HDF_EXTRA_FLAGS) -if (NOT WINDOWS) +if (MINGW OR NOT WINDOWS) # Might want to check explicitly for Linux and possibly Cygwin # instead of checking for not Solaris or Darwin. if (NOT ${HDF_PREFIX}_HAVE_SOLARIS AND NOT ${HDF_PREFIX}_HAVE_DARWIN) @@ -283,20 +276,19 @@ if (NOT WINDOWS) # systems. # POSIX feature information can be found in the gcc manual at: # http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html - set (HDF_EXTRA_C_FLAGS -D_POSIX_C_SOURCE=200112L) + set (HDF_EXTRA_C_FLAGS -D_POSIX_C_SOURCE=200809L) # Need to add this so that O_DIRECT is visible for the direct # VFD on Linux systems. - set (HDF_EXTRA_C_FLAGS -D_GNU_SOURCE) + set (HDF_EXTRA_C_FLAGS ${HDF_EXTRA_C_FLAGS} -D_GNU_SOURCE) option (HDF_ENABLE_LARGE_FILE "Enable support for large (64-bit) files on Linux." ON) - if (HDF_ENABLE_LARGE_FILE) + if (HDF_ENABLE_LARGE_FILE AND NOT DEFINED TEST_LFS_WORKS_RUN) set (msg "Performing TEST_LFS_WORKS") - TRY_RUN (TEST_LFS_WORKS_RUN TEST_LFS_WORKS_COMPILE + try_run (TEST_LFS_WORKS_RUN TEST_LFS_WORKS_COMPILE ${CMAKE_BINARY_DIR} ${HDF_RESOURCES_EXT_DIR}/HDFTests.c - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=-DTEST_LFS_WORKS - OUTPUT_VARIABLE OUTPUT + COMPILE_DEFINITIONS "-DTEST_LFS_WORKS" ) # The LARGEFILE definitions were from the transition period @@ -313,14 +305,14 @@ if (NOT WINDOWS) set (TEST_LFS_WORKS "" CACHE INTERNAL ${msg}) message (STATUS "${msg}... no") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Test TEST_LFS_WORKS Run failed with the following output and exit code:\n ${OUTPUT}\n" + "Test TEST_LFS_WORKS Run failed with the following exit code:\n ${TEST_LFS_WORKS_RUN}\n" ) endif () else () set (TEST_LFS_WORKS "" CACHE INTERNAL ${msg}) message (STATUS "${msg}... no") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Test TEST_LFS_WORKS Compile failed with the following output:\n ${OUTPUT}\n" + "Test TEST_LFS_WORKS Compile failed\n" ) endif () endif () @@ -328,26 +320,19 @@ if (NOT WINDOWS) endif () endif () -add_definitions (${HDF_EXTRA_FLAGS}) - #----------------------------------------------------------------------------- # Check for HAVE_OFF64_T functionality #----------------------------------------------------------------------------- -if (NOT WINDOWS OR MINGW) +if (MINGW OR NOT WINDOWS) HDF_FUNCTION_TEST (HAVE_OFF64_T) if (${HDF_PREFIX}_HAVE_OFF64_T) CHECK_FUNCTION_EXISTS (lseek64 ${HDF_PREFIX}_HAVE_LSEEK64) - CHECK_FUNCTION_EXISTS (fseeko64 ${HDF_PREFIX}_HAVE_FSEEKO64) - CHECK_FUNCTION_EXISTS (ftello64 ${HDF_PREFIX}_HAVE_FTELLO64) - CHECK_FUNCTION_EXISTS (ftruncate64 ${HDF_PREFIX}_HAVE_FTRUNCATE64) endif () CHECK_FUNCTION_EXISTS (fseeko ${HDF_PREFIX}_HAVE_FSEEKO) - CHECK_FUNCTION_EXISTS (ftello ${HDF_PREFIX}_HAVE_FTELLO) - HDF_FUNCTION_TEST (HAVE_STAT64_STRUCT) + CHECK_STRUCT_HAS_MEMBER("struct stat64" st_blocks "sys/types.h;sys/stat.h" HAVE_STAT64_STRUCT) if (HAVE_STAT64_STRUCT) - CHECK_FUNCTION_EXISTS (fstat64 ${HDF_PREFIX}_HAVE_FSTAT64) CHECK_FUNCTION_EXISTS (stat64 ${HDF_PREFIX}_HAVE_STAT64) endif () endif () @@ -417,7 +402,7 @@ if (NOT APPLE) if (NOT ${HDF_PREFIX}_SIZEOF_SSIZE_T) set (${HDF_PREFIX}_SIZEOF_SSIZE_T 0) endif () - if (NOT WINDOWS) + if (MINGW OR NOT WINDOWS) HDF_CHECK_TYPE_SIZE (ptrdiff_t ${HDF_PREFIX}_SIZEOF_PTRDIFF_T) endif () endif () @@ -427,13 +412,13 @@ HDF_CHECK_TYPE_SIZE (off64_t ${HDF_PREFIX}_SIZEOF_OFF64_T) if (NOT ${HDF_PREFIX}_SIZEOF_OFF64_T) set (${HDF_PREFIX}_SIZEOF_OFF64_T 0) endif () +HDF_CHECK_TYPE_SIZE (time_t ${HDF_PREFIX}_SIZEOF_TIME_T) #----------------------------------------------------------------------------- # Extra C99 types #----------------------------------------------------------------------------- # _Bool type support -CHECK_INCLUDE_FILE_CONCAT (stdbool.h ${HDF_PREFIX}_HAVE_STDBOOL_H) if (HAVE_STDBOOL_H) set (CMAKE_EXTRA_INCLUDE_FILES stdbool.h) HDF_CHECK_TYPE_SIZE (bool ${HDF_PREFIX}_SIZEOF_BOOL) @@ -441,7 +426,7 @@ else () HDF_CHECK_TYPE_SIZE (_Bool ${HDF_PREFIX}_SIZEOF_BOOL) endif () -if (NOT WINDOWS) +if (MINGW OR NOT WINDOWS) #----------------------------------------------------------------------------- # Check if the dev_t type is a scalar type #----------------------------------------------------------------------------- @@ -456,39 +441,42 @@ if (NOT WINDOWS) #----------------------------------------------------------------------------- # Check a bunch of time functions #----------------------------------------------------------------------------- + CHECK_STRUCT_HAS_MEMBER("struct tm" tm_gmtoff "time.h" ${HDF_PREFIX}_HAVE_TM_GMTOFF) + CHECK_STRUCT_HAS_MEMBER("struct tm" __tm_gmtoff "time.h" ${HDF_PREFIX}_HAVE___TM_GMTOFF) + CHECK_STRUCT_HAS_MEMBER("struct tm" tm_sec "sys/types.h;sys/time.h;time.h" ${HDF_PREFIX}_TIME_WITH_SYS_TIME) + if (${HDF_PREFIX}_HAVE_SYS_TIME_H) + CHECK_STRUCT_HAS_MEMBER("struct tm" tz_minuteswest "sys/types.h;sys/time.h;time.h" ${HDF_PREFIX}_HAVE_STRUCT_TIMEZONE) + else () + CHECK_STRUCT_HAS_MEMBER("struct tm" tz_minuteswest "sys/types.h;time.h" ${HDF_PREFIX}_HAVE_STRUCT_TIMEZONE) + endif () CHECK_FUNCTION_EXISTS (gettimeofday ${HDF_PREFIX}_HAVE_GETTIMEOFDAY) - foreach (test - HAVE_TM_GMTOFF - HAVE___TM_GMTOFF + foreach (time_test # HAVE_TIMEZONE - HAVE_STRUCT_TIMEZONE GETTIMEOFDAY_GIVES_TZ - TIME_WITH_SYS_TIME HAVE_TM_ZONE HAVE_STRUCT_TM_TM_ZONE ) - HDF_FUNCTION_TEST (${test}) + HDF_FUNCTION_TEST (${time_test}) endforeach () if (NOT CYGWIN AND NOT MINGW) HDF_FUNCTION_TEST (HAVE_TIMEZONE) -# HDF_FUNCTION_TEST (HAVE_STAT_ST_BLOCKS) endif () # ---------------------------------------------------------------------- # Does the struct stat have the st_blocks field? This field is not Posix. # - HDF_FUNCTION_TEST (HAVE_STAT_ST_BLOCKS) + CHECK_STRUCT_HAS_MEMBER("struct stat" st_blocks "sys/types.h;sys/stat.h" ${HDF_PREFIX}_HAVE_STAT_ST_BLOCKS) # ---------------------------------------------------------------------- # How do we figure out the width of a tty in characters? # CHECK_FUNCTION_EXISTS (ioctl ${HDF_PREFIX}_HAVE_IOCTL) - HDF_FUNCTION_TEST (HAVE_STRUCT_VIDEOCONFIG) - HDF_FUNCTION_TEST (HAVE_STRUCT_TEXT_INFO) + CHECK_STRUCT_HAS_MEMBER ("struct videoconfig" numtextcols "" ${HDF_PREFIX}_HAVE_STRUCT_VIDEOCONFIG) + CHECK_STRUCT_HAS_MEMBER ("struct text_info" screenwidth "" ${HDF_PREFIX}_HAVE_STRUCT_TEXT_INFO) CHECK_FUNCTION_EXISTS (_getvideoconfig ${HDF_PREFIX}_HAVE__GETVIDEOCONFIG) CHECK_FUNCTION_EXISTS (gettextinfo ${HDF_PREFIX}_HAVE_GETTEXTINFO) CHECK_FUNCTION_EXISTS (_scrsize ${HDF_PREFIX}_HAVE__SCRSIZE) - if (NOT CYGWIN AND NOT MINGW) + if (NOT CYGWIN) CHECK_FUNCTION_EXISTS (GetConsoleScreenBufferInfo ${HDF_PREFIX}_HAVE_GETCONSOLESCREENBUFFERINFO) endif () CHECK_SYMBOL_EXISTS (TIOCGWINSZ "sys/ioctl.h" ${HDF_PREFIX}_HAVE_TIOCGWINSZ) @@ -520,6 +508,8 @@ CHECK_FUNCTION_EXISTS (lround ${HDF_PREFIX}_HAVE_LROUND) CHECK_FUNCTION_EXISTS (lroundf ${HDF_PREFIX}_HAVE_LROUNDF) CHECK_FUNCTION_EXISTS (lstat ${HDF_PREFIX}_HAVE_LSTAT) +CHECK_FUNCTION_EXISTS (pread ${HDF_PREFIX}_HAVE_PREAD) +CHECK_FUNCTION_EXISTS (pwrite ${HDF_PREFIX}_HAVE_PWRITE) CHECK_FUNCTION_EXISTS (rand_r ${HDF_PREFIX}_HAVE_RAND_R) CHECK_FUNCTION_EXISTS (random ${HDF_PREFIX}_HAVE_RANDOM) CHECK_FUNCTION_EXISTS (round ${HDF_PREFIX}_HAVE_ROUND) @@ -547,7 +537,7 @@ CHECK_FUNCTION_EXISTS (vasprintf ${HDF_PREFIX}_HAVE_VASPRINTF) CHECK_FUNCTION_EXISTS (waitpid ${HDF_PREFIX}_HAVE_WAITPID) CHECK_FUNCTION_EXISTS (vsnprintf ${HDF_PREFIX}_HAVE_VSNPRINTF) -if (NOT WINDOWS) +if (MINGW OR NOT WINDOWS) if (${HDF_PREFIX}_HAVE_VSNPRINTF) HDF_FUNCTION_TEST (VSNPRINTF_WORKS) endif () @@ -568,8 +558,8 @@ endif () #----------------------------------------------------------------------------- # Check a bunch of other functions #----------------------------------------------------------------------------- -if (NOT WINDOWS) - foreach (test +if (MINGW OR NOT WINDOWS) + foreach (other_test HAVE_ATTRIBUTE HAVE_C99_FUNC # STDC_HEADERS @@ -578,72 +568,7 @@ if (NOT WINDOWS) SYSTEM_SCOPE_THREADS HAVE_SOCKLEN_T ) - HDF_FUNCTION_TEST (${test}) - endforeach () -endif () - -# For other CXX specific tests, use this MACRO. -macro (HDF_CXX_FUNCTION_TEST OTHER_TEST) - if ("${OTHER_TEST}" MATCHES "^${OTHER_TEST}$") - set (MACRO_CHECK_FUNCTION_DEFINITIONS "-D${OTHER_TEST} ${CMAKE_REQUIRED_FLAGS}") - set (OTHER_TEST_ADD_LIBRARIES) - if (CMAKE_REQUIRED_LIBRARIES) - set (OTHER_TEST_ADD_LIBRARIES "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") - endif () - - foreach (def - HAVE_SYS_TIME_H - HAVE_UNISTD_H - HAVE_SYS_TYPES_H - HAVE_SYS_SOCKET_H - HAVE_SYS_FILE_H - ) - if ("${${HDF_PREFIX}_${def}}") - set (MACRO_CHECK_FUNCTION_DEFINITIONS "${MACRO_CHECK_FUNCTION_DEFINITIONS} -D${def}") - endif () - endforeach () - - if (LARGEFILE) - set (MACRO_CHECK_FUNCTION_DEFINITIONS - "${MACRO_CHECK_FUNCTION_DEFINITIONS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE" - ) - endif () - - #message (STATUS "Performing ${OTHER_TEST}") - TRY_COMPILE (${OTHER_TEST} - ${CMAKE_BINARY_DIR} - ${HDF_RESOURCES_EXT_DIR}/HDFCXXTests.cpp - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS} - "${OTHER_TEST_ADD_LIBRARIES}" - OUTPUT_VARIABLE OUTPUT - ) - if (${OTHER_TEST} EQUAL 0) - set (${OTHER_TEST} 1 CACHE INTERNAL "CXX test ${FUNCTION}") - message (STATUS "Performing CXX Test ${OTHER_TEST} - Success") - else () - message (STATUS "Performing CXX Test ${OTHER_TEST} - Failed") - set (${OTHER_TEST} "" CACHE INTERNAL "CXX test ${FUNCTION}") - file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log - "Performing CXX Test ${OTHER_TEST} failed with the following output:\n" - "${OUTPUT}\n" - ) - endif () - endif () -endmacro () - -#----------------------------------------------------------------------------- -# Check a bunch of cxx functions -#----------------------------------------------------------------------------- -if (CMAKE_CXX_COMPILER_LOADED) - foreach (test - OLD_HEADER_FILENAME - ${HDF_PREFIX}_NO_NAMESPACE - ${HDF_PREFIX}_NO_STD - BOOL_NOTDEFINED - NO_STATIC_CAST - CXX_HAVE_OFFSETOF - ) - HDF_CXX_FUNCTION_TEST (${test}) + HDF_FUNCTION_TEST (${other_test}) endforeach () endif () @@ -653,36 +578,27 @@ endif () if (WINDOWS) if (NOT HDF_NO_IOEO_TEST) message (STATUS "Checking for InitOnceExecuteOnce:") - if ("${${HDF_PREFIX}_HAVE_IOEO}" MATCHES "^${${HDF_PREFIX}_HAVE_IOEO}$") + if (NOT DEFINED ${HDF_PREFIX}_HAVE_IOEO) if (LARGEFILE) set (CMAKE_REQUIRED_DEFINITIONS "${CURRENT_TEST_DEFINITIONS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE" ) endif () - set (MACRO_CHECK_FUNCTION_DEFINITIONS - "-DHAVE_IOEO ${CMAKE_REQUIRED_FLAGS}") - if (CMAKE_REQUIRED_LIBRARIES) - set (CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") - else () - set (CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES) - endif () + set (MACRO_CHECK_FUNCTION_DEFINITIONS "-DHAVE_IOEO ${CMAKE_REQUIRED_FLAGS}") if (CMAKE_REQUIRED_INCLUDES) - set (CHECK_C_SOURCE_COMPILES_ADD_INCLUDES - "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}") + set (CHECK_C_SOURCE_COMPILES_ADD_INCLUDES "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}") else () set (CHECK_C_SOURCE_COMPILES_ADD_INCLUDES) endif () TRY_RUN(HAVE_IOEO_EXITCODE HAVE_IOEO_COMPILED - ${CMAKE_BINARY_DIR} - ${HDF_RESOURCES_EXT_DIR}/HDFTests.c - COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS} - -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH} - "${CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES}" - "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES}" - COMPILE_OUTPUT_VARIABLE OUTPUT) + ${CMAKE_BINARY_DIR} + ${HDF_RESOURCES_EXT_DIR}/HDFTests.c + COMPILE_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} ${MACRO_CHECK_FUNCTION_DEFINITIONS}" + LINK_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}" + CMAKE_FLAGS "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES} -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH}" + COMPILE_OUTPUT_VARIABLE OUTPUT + ) # if it did not compile make the return value fail code of 1 if (NOT HAVE_IOEO_COMPILED) set (HAVE_IOEO_EXITCODE 1) @@ -733,8 +649,8 @@ if (NOT ${HDF_PREFIX}_PRINTF_LL_WIDTH OR ${HDF_PREFIX}_PRINTF_LL_WIDTH MATCHES " TRY_RUN (${HDF_PREFIX}_PRINTF_LL_TEST_RUN ${HDF_PREFIX}_PRINTF_LL_TEST_COMPILE ${CMAKE_BINARY_DIR} ${HDF_RESOURCES_EXT_DIR}/HDFTests.c - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${CURRENT_TEST_DEFINITIONS} - OUTPUT_VARIABLE OUTPUT + COMPILE_DEFINITIONS "${CURRENT_TEST_DEFINITIONS}" + RUN_OUTPUT_VARIABLE OUTPUT ) if (${HDF_PREFIX}_PRINTF_LL_TEST_COMPILE) if (${HDF_PREFIX}_PRINTF_LL_TEST_RUN MATCHES 0) @@ -742,11 +658,11 @@ if (NOT ${HDF_PREFIX}_PRINTF_LL_WIDTH OR ${HDF_PREFIX}_PRINTF_LL_WIDTH MATCHES " set (${HDF_PREFIX}_PRINTF_LL_WIDTH "\"${${HDF_PREFIX}_PRINTF_LL}\"" CACHE INTERNAL "Width for printf for type `long long' or `__int64', us. `ll") set (PRINT_LL_FOUND 1) else () - message ("Width test failed with result: ${${HDF_PREFIX}_PRINTF_LL_TEST_RUN}") + message (STATUS "Width test failed with result: ${${HDF_PREFIX}_PRINTF_LL_TEST_RUN}") endif () else () file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log - "Test ${HDF_PREFIX}_PRINTF_LL_WIDTH failed with the following output:\n ${OUTPUT}\n" + "Test ${HDF_PREFIX}_PRINTF_LL_WIDTH failed\n" ) endif () @@ -767,3 +683,4 @@ endif () # the cache value is set in it's config file) # set (${HDF_PREFIX}_CONVERT_DENORMAL_FLOAT 1) + diff --git a/config/cmake_ext_mod/FindMPI.cmake b/config/cmake_ext_mod/FindMPI.cmake deleted file mode 100644 index ff1ead2..0000000 --- a/config/cmake_ext_mod/FindMPI.cmake +++ /dev/null @@ -1,693 +0,0 @@ -# Distributed under the OSI-approved BSD 3-Clause License. See https://cmake.org/licensing for details. - -#.rst: -# FindMPI -# ------- -# -# Find a Message Passing Interface (MPI) implementation -# -# The Message Passing Interface (MPI) is a library used to write -# high-performance distributed-memory parallel applications, and is -# typically deployed on a cluster. MPI is a standard interface (defined -# by the MPI forum) for which many implementations are available. All -# of them have somewhat different include paths, libraries to link -# against, etc., and this module tries to smooth out those differences. -# -# Variables -# ^^^^^^^^^ -# -# This module will set the following variables per language in your -# project, where <lang> is one of C, CXX, or Fortran: -# -# :: -# -# MPI_<lang>_FOUND TRUE if FindMPI found MPI flags for <lang> -# MPI_<lang>_COMPILER MPI Compiler wrapper for <lang> -# MPI_<lang>_COMPILE_FLAGS Compilation flags for MPI programs -# MPI_<lang>_INCLUDE_PATH Include path(s) for MPI header -# MPI_<lang>_LINK_FLAGS Linking flags for MPI programs -# MPI_<lang>_LIBRARIES All libraries to link MPI programs against -# -# Additionally, FindMPI sets the following variables for running MPI -# programs from the command line: -# -# :: -# -# MPIEXEC Executable for running MPI programs -# MPIEXEC_NUMPROC_FLAG Flag to pass to MPIEXEC before giving -# it the number of processors to run on -# MPIEXEC_PREFLAGS Flags to pass to MPIEXEC directly -# before the executable to run. -# MPIEXEC_POSTFLAGS Flags to pass to MPIEXEC after other flags -# -# Usage -# ^^^^^ -# -# To use this module, simply call FindMPI from a CMakeLists.txt file, or -# run ``find_package(MPI)``, then run CMake. If you are happy with the -# auto-detected configuration for your language, then you're done. If -# not, you have two options: -# -# :: -# -# 1. Set MPI_<lang>_COMPILER to the MPI wrapper (mpicc, etc.) of your -# choice and reconfigure. FindMPI will attempt to determine all the -# necessary variables using THAT compiler's compile and link flags. -# 2. If this fails, or if your MPI implementation does not come with -# a compiler wrapper, then set both MPI_<lang>_LIBRARIES and -# MPI_<lang>_INCLUDE_PATH. You may also set any other variables -# listed above, but these two are required. This will circumvent -# autodetection entirely. -# -# When configuration is successful, ``MPI_<lang>_COMPILER`` will be set to -# the compiler wrapper for <lang>, if it was found. ``MPI_<lang>_FOUND`` -# and other variables above will be set if any MPI implementation was -# found for <lang>, regardless of whether a compiler was found. -# -# When using ``MPIEXEC`` to execute MPI applications, you should typically -# use all of the ``MPIEXEC`` flags as follows: -# -# :: -# -# ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS -# ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS -# -# where ``PROCS`` is the number of processors on which to execute the -# program, ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to -# pass to the MPI program. -# -# Backward Compatibility -# ^^^^^^^^^^^^^^^^^^^^^^ -# -# For backward compatibility with older versions of FindMPI, these -# variables are set, but deprecated: -# -# :: -# -# MPI_FOUND MPI_COMPILER MPI_LIBRARY -# MPI_COMPILE_FLAGS MPI_INCLUDE_PATH MPI_EXTRA_LIBRARY -# MPI_LINK_FLAGS MPI_LIBRARIES -# -# In new projects, please use the ``MPI_<lang>_XXX`` equivalents. - -# include this to handle the QUIETLY and REQUIRED arguments -include(${CMAKE_ROOT}/Modules/FindPackageHandleStandardArgs.cmake) -include(GetPrerequisites) - -# -# This part detects MPI compilers, attempting to wade through the mess of compiler names in -# a sensible way. -# -# The compilers are detected in this order: -# -# 1. Try to find the most generic available MPI compiler, as this is usually set up by -# cluster admins. e.g., if plain old mpicc is available, we'll use it and assume it's -# the right compiler. -# -# 2. If a generic mpicc is NOT found, then we attempt to find one that matches -# CMAKE_<lang>_COMPILER_ID. e.g. if you are using XL compilers, we'll try to find mpixlc -# and company, but not mpiicc. This hopefully prevents toolchain mismatches. -# -# If you want to force a particular MPI compiler other than what we autodetect (e.g. if you -# want to compile regular stuff with GNU and parallel stuff with Intel), you can always set -# your favorite MPI_<lang>_COMPILER explicitly and this stuff will be ignored. -# - -# Start out with the generic MPI compiler names, as these are most commonly used. -set(_MPI_C_COMPILER_NAMES mpicc mpcc mpicc_r mpcc_r mpicc.bat) -set(_MPI_CXX_COMPILER_NAMES mpicxx mpiCC mpcxx mpCC mpic++ mpc++ - mpicxx_r mpiCC_r mpcxx_r mpCC_r mpic++_r mpc++_r - mpicxx.bat) -set(_MPI_Fortran_COMPILER_NAMES mpif95 mpif95_r mpf95 mpf95_r - mpif90 mpif90_r mpf90 mpf90_r - mpif77 mpif77_r mpf77 mpf77_r) - -# GNU compiler names -set(_MPI_GNU_C_COMPILER_NAMES mpigcc mpgcc mpigcc_r mpgcc_r) -set(_MPI_GNU_CXX_COMPILER_NAMES mpig++ mpg++ mpig++_r mpg++_r) -set(_MPI_GNU_Fortran_COMPILER_NAMES mpigfortran mpgfortran mpigfortran_r mpgfortran_r - mpig77 mpig77_r mpg77 mpg77_r) - -# Intel MPI compiler names -set(_MPI_Intel_C_COMPILER_NAMES mpiicc mpiicc.bat) -set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc mpiicxx mpiic++ mpiiCC mpiicpc.bat) -set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort mpiif95 mpiif90 mpiif77 mpiifort.bat) - -# PGI compiler names -set(_MPI_PGI_C_COMPILER_NAMES mpipgcc mppgcc) -set(_MPI_PGI_CXX_COMPILER_NAMES mpipgCC mppgCC) -set(_MPI_PGI_Fortran_COMPILER_NAMES mpipgf95 mpipgf90 mppgf95 mppgf90 mpipgf77 mppgf77) - -# XLC MPI Compiler names -set(_MPI_XL_C_COMPILER_NAMES mpxlc mpxlc_r mpixlc mpixlc_r) -set(_MPI_XL_CXX_COMPILER_NAMES mpixlcxx mpixlC mpixlc++ mpxlcxx mpxlc++ mpixlc++ mpxlCC - mpixlcxx_r mpixlC_r mpixlc++_r mpxlcxx_r mpxlc++_r mpixlc++_r mpxlCC_r) -set(_MPI_XL_Fortran_COMPILER_NAMES mpixlf95 mpixlf95_r mpxlf95 mpxlf95_r - mpixlf90 mpixlf90_r mpxlf90 mpxlf90_r - mpixlf77 mpixlf77_r mpxlf77 mpxlf77_r - mpixlf mpixlf_r mpxlf mpxlf_r) - -# append vendor-specific compilers to the list if we either don't know the compiler id, -# or if we know it matches the regular compiler. -foreach (lang C CXX Fortran) - foreach (id GNU Intel PGI XL) - if (NOT CMAKE_${lang}_COMPILER_ID OR CMAKE_${lang}_COMPILER_ID STREQUAL id) - list(APPEND _MPI_${lang}_COMPILER_NAMES ${_MPI_${id}_${lang}_COMPILER_NAMES}) - endif() - unset(_MPI_${id}_${lang}_COMPILER_NAMES) # clean up the namespace here - endforeach() -endforeach() - - -# Names to try for MPI exec -set(_MPI_EXEC_NAMES mpiexec mpirun lamexec srun) - -# Grab the path to MPI from the registry if we're on windows. -set(_MPI_PREFIX_PATH) -if(WIN32) - # MSMPI - file(TO_CMAKE_PATH "$ENV{MSMPI_BIN}" msmpi_bin_path) # The default path ends with a '\' and doesn't mix with ';' when appending. - list(APPEND _MPI_PREFIX_PATH "${msmpi_bin_path}") - unset(msmpi_bin_path) - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]/Bin") - list(APPEND _MPI_PREFIX_PATH "$ENV{MSMPI_INC}/..") # The SDK is installed separately from the runtime - # MPICH - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/..") - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]") - list(APPEND _MPI_PREFIX_PATH "$ENV{ProgramW6432}/MPICH2/") -endif() - -# Build a list of prefixes to search for MPI. -foreach(SystemPrefixDir ${CMAKE_SYSTEM_PREFIX_PATH}) - foreach(MpiPackageDir ${_MPI_PREFIX_PATH}) - if(EXISTS ${SystemPrefixDir}/${MpiPackageDir}) - list(APPEND _MPI_PREFIX_PATH "${SystemPrefixDir}/${MpiPackageDir}") - endif() - endforeach() -endforeach() - -function (_mpi_check_compiler compiler options cmdvar resvar) - execute_process( - COMMAND "${compiler}" ${options} - OUTPUT_VARIABLE cmdline OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE cmdline ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE success) - # Intel MPI 5.0.1 will return a zero return code even when the - # argument to the MPI compiler wrapper is unknown. Attempt to - # catch this case. - if(cmdline MATCHES "undefined reference" OR cmdline MATCHES "unrecognized") - set(success 255 ) - endif() - set(${cmdvar} "${cmdline}" PARENT_SCOPE) - set(${resvar} "${success}" PARENT_SCOPE) -endfunction() - -# -# interrogate_mpi_compiler(lang try_libs) -# -# Attempts to extract compiler and linker args from an MPI compiler. The arguments set -# by this function are: -# -# MPI_<lang>_INCLUDE_PATH MPI_<lang>_LINK_FLAGS MPI_<lang>_FOUND -# MPI_<lang>_COMPILE_FLAGS MPI_<lang>_LIBRARIES -# -# MPI_<lang>_COMPILER must be set beforehand to the absolute path to an MPI compiler for -# <lang>. Additionally, MPI_<lang>_INCLUDE_PATH and MPI_<lang>_LIBRARIES may be set -# to skip autodetection. -# -# If try_libs is TRUE, this will also attempt to find plain MPI libraries in the usual -# way. In general, this is not as effective as interrogating the compilers, as it -# ignores language-specific flags and libraries. However, some MPI implementations -# (Windows implementations) do not have compiler wrappers, so this approach must be used. -# -function (interrogate_mpi_compiler lang try_libs) - # MPI_${lang}_NO_INTERROGATE will be set to a compiler name when the *regular* compiler was - # discovered to be the MPI compiler. This happens on machines like the Cray XE6 that use - # modules to set cc, CC, and ftn to the MPI compilers. If the user force-sets another MPI - # compiler, MPI_${lang}_COMPILER won't be equal to MPI_${lang}_NO_INTERROGATE, and we'll - # inspect that compiler anew. This allows users to set new compilers w/o rm'ing cache. - string(COMPARE NOTEQUAL "${MPI_${lang}_NO_INTERROGATE}" "${MPI_${lang}_COMPILER}" interrogate) - - # If MPI is set already in the cache, don't bother with interrogating the compiler. - if (interrogate AND ((NOT MPI_${lang}_INCLUDE_PATH) OR (NOT MPI_${lang}_LIBRARIES))) - if (MPI_${lang}_COMPILER) - # Check whether the -showme:compile option works. This indicates that we have either OpenMPI - # or a newer version of LAM-MPI, and implies that -showme:link will also work. - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - if (MPI_COMPILER_RETURN EQUAL 0) - # If we appear to have -showme:compile, then we should - # also have -showme:link. Try it. - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:link - OUTPUT_VARIABLE MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE MPI_COMPILER_RETURN) - - if (MPI_COMPILER_RETURN EQUAL 0) - # We probably have -showme:incdirs and -showme:libdirs as well, - # so grab that while we're at it. - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:incdirs - OUTPUT_VARIABLE MPI_INCDIRS OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_INCDIRS ERROR_STRIP_TRAILING_WHITESPACE) - - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:libdirs - OUTPUT_VARIABLE MPI_LIBDIRS OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LIBDIRS ERROR_STRIP_TRAILING_WHITESPACE) - - else() - # reset things here if something went wrong. - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) - endif() - endif () - - # Older versions of LAM-MPI have "-showme". Try to find that. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - endif() - - # MVAPICH uses -compile-info and -link-info. Try them. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - - # If we have compile-info, also have link-info. - if (MPI_COMPILER_RETURN EQUAL 0) - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -link-info - OUTPUT_VARIABLE MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE MPI_COMPILER_RETURN) - endif() - - # make sure we got compile and link. Reset vars if something's wrong. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) - endif() - endif() - - # MPICH just uses "-show". Try it. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - endif() - - if (MPI_COMPILER_RETURN EQUAL 0) - # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE - # into MPI_LINK_CMDLINE, if we didn't find the link line. - if (NOT MPI_LINK_CMDLINE) - set(MPI_LINK_CMDLINE ${MPI_COMPILE_CMDLINE}) - endif() - else() - message(STATUS "Unable to determine MPI from MPI driver ${MPI_${lang}_COMPILER}") - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) - endif() - - # Here, we're done with the interrogation part, and we'll try to extract args we care - # about from what we learned from the compiler wrapper scripts. - - # If interrogation came back with something, extract our variable from the MPI command line - if (MPI_COMPILE_CMDLINE OR MPI_LINK_CMDLINE) - # Extract compile flags from the compile command line. - string(REGEX MATCHALL "(^| )-[Df]([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_FLAGS "${MPI_COMPILE_CMDLINE}") - set(MPI_COMPILE_FLAGS_WORK) - - foreach(FLAG ${MPI_ALL_COMPILE_FLAGS}) - string(REGEX REPLACE "^ " "" FLAG ${FLAG}) - if (MPI_COMPILE_FLAGS_WORK) - set(MPI_COMPILE_FLAGS_WORK "${MPI_COMPILE_FLAGS_WORK} ${FLAG}") - else() - set(MPI_COMPILE_FLAGS_WORK ${FLAG}) - endif() - endforeach() - - # Extract include paths from compile command line - string(REGEX MATCHALL "(^| )-I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}") - set(MPI_INCLUDE_PATH_WORK) - - foreach(IPATH ${MPI_ALL_INCLUDE_PATHS}) - string(REGEX REPLACE "^ ?-I" "" IPATH ${IPATH}) - string(REPLACE "//" "/" IPATH ${IPATH}) - string(REPLACE "\"" "" IPATH ${IPATH}) - file(TO_CMAKE_PATH "${IPATH}" IPATH) - list(APPEND MPI_INCLUDE_PATH_WORK ${IPATH}) - endforeach() - - # try using showme:incdirs if extracting didn't work. - if (NOT MPI_INCLUDE_PATH_WORK) - set(MPI_INCLUDE_PATH_WORK ${MPI_INCDIRS}) - separate_arguments(MPI_INCLUDE_PATH_WORK) - endif() - - # If all else fails, just search for mpi.h in the normal include paths. - if (NOT MPI_INCLUDE_PATH_WORK) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_path(MPI_HEADER_PATH mpi.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include) - set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - endif() - - # Extract linker paths from the link command line - string(REGEX MATCHALL "(^| |-Wl,)(-L|/LIBPATH:)([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}") - set(MPI_LINK_PATH) - foreach(LPATH ${MPI_ALL_LINK_PATHS}) - string(REGEX REPLACE "^(| |-Wl,)(-L|/LIBPATH:)" "" LPATH ${LPATH}) - string(REPLACE "//" "/" LPATH ${LPATH}) - list(APPEND MPI_LINK_PATH ${LPATH}) - endforeach() - - # try using showme:libdirs if extracting didn't work. - if (NOT MPI_LINK_PATH) - set(MPI_LINK_PATH ${MPI_LIBDIRS}) - separate_arguments(MPI_LINK_PATH) - endif() - - # Extract linker flags from the link command line - string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}") - set(MPI_LINK_FLAGS_WORK) - foreach(FLAG ${MPI_ALL_LINK_FLAGS}) - string(REGEX REPLACE "^ " "" FLAG ${FLAG}) - if (MPI_LINK_FLAGS_WORK) - set(MPI_LINK_FLAGS_WORK "${MPI_LINK_FLAGS_WORK} ${FLAG}") - else() - set(MPI_LINK_FLAGS_WORK ${FLAG}) - endif() - endforeach() - - # Extract the set of libraries to link against from the link command - # line - string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") - if(WIN32) - # The intel wrappers on windows link against static versions of the MPI libraries. - # The static libraries are simply listed on the command line without -l. - # For instance: " icl ... impi.lib " - string(REGEX MATCHALL "(^| )([^\" ]+)\\.lib" tmp "${MPI_LINK_CMDLINE}") - list(APPEND MPI_LIBNAMES ${tmp}) - endif() - - # add the compiler implicit directories because some compilers - # such as the intel compiler have libraries that show up - # in the showme list that can only be found in the implicit - # link directories of the compiler. - if (DEFINED CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES) - set(MPI_LINK_PATH "${MPI_LINK_PATH};${CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES}") - endif () - - # Determine full path names for all of the libraries that one needs - # to link against in an MPI program - foreach(LIB ${MPI_LIBNAMES}) - string(REGEX REPLACE "^ ?-l" "" LIB ${LIB}) - if(WIN32) - string(REGEX REPLACE "\\.lib$" "" LIB ${LIB}) - endif() - string(STRIP ${LIB} LIB) - # MPI_LIB is cached by find_library, but we don't want that. Clear it first. - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB NAMES ${LIB} HINTS ${MPI_LINK_PATH}) - - if (MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) - elseif (NOT MPI_FIND_QUIETLY) - message(WARNING "Unable to find MPI library ${LIB}") - endif() - endforeach() - - # Sanity check MPI_LIBRARIES to make sure there are enough libraries - list(LENGTH MPI_LIBRARIES_WORK MPI_NUMLIBS) - list(LENGTH MPI_LIBNAMES MPI_NUMLIBS_EXPECTED) - if (NOT MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED) - set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND") - endif() - endif() - - elseif(try_libs) - # If we didn't have an MPI compiler script to interrogate, attempt to find everything - # with plain old find functions. This is nasty because MPI implementations have LOTS of - # different library names, so this section isn't going to be very generic. We need to - # make sure it works for MS MPI, though, since there are no compiler wrappers for that. - find_path(MPI_HEADER_PATH mpi.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include Inc) - set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - - # Decide between 32-bit and 64-bit libraries for Microsoft's MPI - if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8) - set(MS_MPI_ARCH_DIR x64) - set(MS_MPI_ARCH_DIR2 amd64) - else() - set(MS_MPI_ARCH_DIR x86) - set(MS_MPI_ARCH_DIR2 i386) - endif() - - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES mpi mpich mpich2 msmpi - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR} lib/${MS_MPI_ARCH_DIR2} Lib/${MS_MPI_ARCH_DIR2}) - set(MPI_LIBRARIES_WORK ${MPI_LIB}) - - # Right now, we only know about the extra libs for C++. - # We could add Fortran here (as there is usually libfmpich, etc.), but - # this really only has to work with MS MPI on Windows. - # Assume that other MPI's are covered by the compiler wrappers. - if (${lang} STREQUAL CXX) - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES mpi++ mpicxx cxx mpi_cxx - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib) - if (MPI_LIBRARIES_WORK AND MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) - endif() - endif() - - if (${lang} STREQUAL Fortran) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_path(MPI_HEADER_PATH mpifptr.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include Include include/${MS_MPI_ARCH_DIR} Include/${MS_MPI_ARCH_DIR2} Include/${MS_MPI_ARCH_DIR} include/${MS_MPI_ARCH_DIR2} Inc Inc/${MS_MPI_ARCH_DIR} Inc/${MS_MPI_ARCH_DIR2}) - if (MPI_INCLUDE_PATH_WORK AND MPI_HEADER_PATH) - list(APPEND MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - endif () - - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES fmpi fmpich fmpich2 fmpich2g msmpifec msmpifmc - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR}) - if (MPI_LIBRARIES_WORK AND MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) - endif () - endif () - - if (NOT MPI_LIBRARIES_WORK) - set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND") - endif() - endif() - - # If we found MPI, set up all of the appropriate cache entries - set(MPI_${lang}_COMPILE_FLAGS ${MPI_COMPILE_FLAGS_WORK} CACHE STRING "MPI ${lang} compilation flags" FORCE) - set(MPI_${lang}_INCLUDE_PATH ${MPI_INCLUDE_PATH_WORK} CACHE STRING "MPI ${lang} include path" FORCE) - set(MPI_${lang}_LINK_FLAGS ${MPI_LINK_FLAGS_WORK} CACHE STRING "MPI ${lang} linking flags" FORCE) - set(MPI_${lang}_LIBRARIES ${MPI_LIBRARIES_WORK} CACHE STRING "MPI ${lang} libraries to link against" FORCE) - mark_as_advanced(MPI_${lang}_COMPILE_FLAGS MPI_${lang}_INCLUDE_PATH MPI_${lang}_LINK_FLAGS MPI_${lang}_LIBRARIES) - - # clear out our temporary lib/header detectionv variable here. - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI lib detection" FORCE) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI header detection" FORCE) - endif() - - # finally set a found variable for each MPI language - if (MPI_${lang}_INCLUDE_PATH AND MPI_${lang}_LIBRARIES) - set(MPI_${lang}_FOUND TRUE PARENT_SCOPE) - else() - set(MPI_${lang}_FOUND FALSE PARENT_SCOPE) - endif() -endfunction() - - -# This function attempts to compile with the regular compiler, to see if MPI programs -# work with it. This is a last ditch attempt after we've tried interrogating mpicc and -# friends, and after we've tried to find generic libraries. Works on machines like -# Cray XE6, where the modules environment changes what MPI version cc, CC, and ftn use. -function(try_regular_compiler lang success) - set(scratch_directory ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}) - if (${lang} STREQUAL Fortran) - set(test_file ${scratch_directory}/cmake_mpi_test.f90) - file(WRITE ${test_file} - "program hello\n" - "include 'mpif.h'\n" - "integer ierror\n" - "call MPI_INIT(ierror)\n" - "call MPI_FINALIZE(ierror)\n" - "end\n") - else() - if (${lang} STREQUAL CXX) - set(test_file ${scratch_directory}/cmake_mpi_test.cpp) - else() - set(test_file ${scratch_directory}/cmake_mpi_test.c) - endif() - file(WRITE ${test_file} - "#include <mpi.h>\n" - "int main(int argc, char **argv) {\n" - " MPI_Init(&argc, &argv);\n" - " MPI_Finalize();\n" - "}\n") - endif() - try_compile(compiler_has_mpi ${scratch_directory} ${test_file}) - if (compiler_has_mpi) - set(MPI_${lang}_NO_INTERROGATE ${CMAKE_${lang}_COMPILER} CACHE STRING "Whether to interrogate MPI ${lang} compiler" FORCE) - set(MPI_${lang}_COMPILER ${CMAKE_${lang}_COMPILER} CACHE STRING "MPI ${lang} compiler" FORCE) - set(MPI_${lang}_COMPILE_FLAGS "" CACHE STRING "MPI ${lang} compilation flags" FORCE) - set(MPI_${lang}_INCLUDE_PATH "" CACHE STRING "MPI ${lang} include path" FORCE) - set(MPI_${lang}_LINK_FLAGS "" CACHE STRING "MPI ${lang} linking flags" FORCE) - set(MPI_${lang}_LIBRARIES "" CACHE STRING "MPI ${lang} libraries to link against" FORCE) - endif() - set(${success} ${compiler_has_mpi} PARENT_SCOPE) - unset(compiler_has_mpi CACHE) -endfunction() - -# End definitions, commence real work here. - -# Most mpi distros have some form of mpiexec which gives us something we can reliably look for. -find_program(MPIEXEC - NAMES ${_MPI_EXEC_NAMES} - HINTS ${MPI_HOME} $ENV{MPI_HOME} - PATHS ${_MPI_PREFIX_PATH} - PATH_SUFFIXES bin - DOC "Executable for running MPI programs.") - -# call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin). -# This gives us a fairly reliable base directory to search for /bin /lib and /include from. -get_filename_component(_MPI_BASE_DIR "${MPIEXEC}" PATH) -get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH) - -set(MPIEXEC_NUMPROC_FLAG "-np" CACHE STRING "Flag used by MPI to specify the number of processes for MPIEXEC; the next option will be the number of processes.") -set(MPIEXEC_PREFLAGS "" CACHE STRING "These flags will be directly before the executable that is being run by MPIEXEC.") -set(MPIEXEC_POSTFLAGS "" CACHE STRING "These flags will come after all flags given to MPIEXEC.") -set(MPIEXEC_MAX_NUMPROCS "2" CACHE STRING "Maximum number of processors available to run MPI applications.") -mark_as_advanced(MPIEXEC MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS) - - -#============================================================================= -# Backward compatibility input hacks. Propagate the FindMPI hints to C and -# CXX if the respective new versions are not defined. Translate the old -# MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${lang}_LIBRARIES. -# -# Once we find the new variables, we translate them back into their old -# equivalents below. -foreach (lang C CXX) - # Old input variables. - set(_MPI_OLD_INPUT_VARS COMPILER COMPILE_FLAGS INCLUDE_PATH LINK_FLAGS) - - # Set new vars based on their old equivalents, if the new versions are not already set. - foreach (var ${_MPI_OLD_INPUT_VARS}) - if (NOT MPI_${lang}_${var} AND MPI_${var}) - set(MPI_${lang}_${var} "${MPI_${var}}") - endif() - endforeach() - - # Special handling for MPI_LIBRARY and MPI_EXTRA_LIBRARY, which we nixed in the - # new FindMPI. These need to be merged into MPI_<lang>_LIBRARIES - if (NOT MPI_${lang}_LIBRARIES AND (MPI_LIBRARY OR MPI_EXTRA_LIBRARY)) - set(MPI_${lang}_LIBRARIES ${MPI_LIBRARY} ${MPI_EXTRA_LIBRARY}) - endif() -endforeach() -#============================================================================= - - -# This loop finds the compilers and sends them off for interrogation. -foreach (lang C CXX Fortran) - if (CMAKE_${lang}_COMPILER_WORKS) - # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler. - if (MPI_${lang}_COMPILER) - if (NOT IS_ABSOLUTE "${MPI_${lang}_COMPILER}") - # Get rid of our default list of names and just search for the name the user wants. - set(_MPI_${lang}_COMPILER_NAMES ${MPI_${lang}_COMPILER}) - set(MPI_${lang}_COMPILER "MPI_${lang}_COMPILER-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - endif() - # If the user specifies a compiler, we don't want to try to search libraries either. - set(try_libs FALSE) - else() - set(try_libs TRUE) - endif() - - find_program(MPI_${lang}_COMPILER - NAMES ${_MPI_${lang}_COMPILER_NAMES} - HINTS ${_MPI_BASE_DIR}/bin - PATHS ${_MPI_PREFIX_PATH} - ) - interrogate_mpi_compiler(${lang} ${try_libs}) - mark_as_advanced(MPI_${lang}_COMPILER) - - # last ditch try -- if nothing works so far, just try running the regular compiler and - # see if we can create an MPI executable. - set(regular_compiler_worked 0) - if (NOT MPI_${lang}_LIBRARIES OR NOT MPI_${lang}_INCLUDE_PATH) - try_regular_compiler(${lang} regular_compiler_worked) - endif() - - # add fortran mpi module path if ENV VAR exists - set (MPI_${lang}_INCLUDE_PATH "${MPI_${lang}_INCLUDE_PATH};$ENV{MPI_FORTRAN_MOD_DIR}") - - set(MPI_${lang}_FIND_QUIETLY ${MPI_FIND_QUIETLY}) - set(MPI_${lang}_FIND_REQUIRED ${MPI_FIND_REQUIRED}) - set(MPI_${lang}_FIND_VERSION ${MPI_FIND_VERSION}) - set(MPI_${lang}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT}) - - if (regular_compiler_worked) - find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_COMPILER) - else() - find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_LIBRARIES MPI_${lang}_INCLUDE_PATH) - endif() - endif() -endforeach() - - -#============================================================================= -# More backward compatibility stuff -# -# Bare MPI sans ${lang} vars are set to CXX then C, depending on what was found. -# This mimics the behavior of the old language-oblivious FindMPI. -set(_MPI_OLD_VARS FOUND COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES) -if (MPI_CXX_FOUND) - foreach (var ${_MPI_OLD_VARS}) - set(MPI_${var} ${MPI_CXX_${var}}) - endforeach() -elseif (MPI_C_FOUND) - foreach (var ${_MPI_OLD_VARS}) - set(MPI_${var} ${MPI_C_${var}}) - endforeach() -else() - # Note that we might still have found Fortran, but you'll need to use MPI_Fortran_FOUND - set(MPI_FOUND FALSE) -endif() - -# Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and MPI_EXTRA_LIBRARY, and set them in cache. -if (MPI_LIBRARIES) - list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK) - set(MPI_LIBRARY ${MPI_LIBRARY_WORK} CACHE FILEPATH "MPI library to link against" FORCE) -else() - set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND" CACHE FILEPATH "MPI library to link against" FORCE) -endif() - -list(LENGTH MPI_LIBRARIES MPI_NUMLIBS) -if (MPI_NUMLIBS GREATER 1) - set(MPI_EXTRA_LIBRARY_WORK ${MPI_LIBRARIES}) - list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0) - set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY_WORK} CACHE STRING "Extra MPI libraries to link against" FORCE) -else() - set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND" CACHE STRING "Extra MPI libraries to link against" FORCE) -endif() -#============================================================================= - -# unset these vars to cleanup namespace -unset(_MPI_OLD_VARS) -unset(_MPI_PREFIX_PATH) -unset(_MPI_BASE_DIR) -foreach (lang C CXX Fortran) - unset(_MPI_${lang}_COMPILER_NAMES) -endforeach() diff --git a/config/cmake_ext_mod/FindSZIP.cmake b/config/cmake_ext_mod/FindSZIP.cmake index 699be85..8f882b4 100644 --- a/config/cmake_ext_mod/FindSZIP.cmake +++ b/config/cmake_ext_mod/FindSZIP.cmake @@ -9,136 +9,108 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # +######################################################################### + +# - Derived from the FindTiff.cmake and FindJPEG.cmake that is included with cmake +# FindSZIP -# - Find SZIP library -# - Derived from the FindTiff.cmake that is included with cmake # Find the native SZIP includes and library -# This module defines -# SZIP_INCLUDE_DIRS, where to find tiff.h, etc. -# SZIP_LIBRARIES, libraries to link against to use SZIP. -# SZIP_FOUND, If false, do not try to use SZIP. -# also defined, but not for general use are -# SZIP_LIBRARY, where to find the SZIP library. -# SZIP_LIBRARY_DEBUG - Debug version of SZIP library -# SZIP_LIBRARY_RELEASE - Release Version of SZIP library -# message (STATUS "Finding SZIP library and headers..." ) +# Imported targets +################## -############################################ +# This module defines the following :prop_tgt:`IMPORTED` targets: # -# Check the existence of the libraries. +# SZIP::SZIP +# The SZIP library, if found. # -############################################ -# This macro was taken directly from the FindQt4.cmake file that is included -# with the CMake distribution. This is NOT my work. All work was done by the -# original authors of the FindQt4.cmake file. Only minor modifications were -# made to remove references to Qt and make this file more generally applicable -######################################################################### +# Result variables +################### -macro (SZIP_ADJUST_LIB_VARS basename) - if (${basename}_INCLUDE_DIR) +# This module will set the following variables in your project: - # if only the release version was found, set the debug variable also to the release version - if (${basename}_LIBRARY_RELEASE AND NOT ${basename}_LIBRARY_DEBUG) - set (${basename}_LIBRARY_DEBUG ${${basename}_LIBRARY_RELEASE}) - set (${basename}_LIBRARY ${${basename}_LIBRARY_RELEASE}) - set (${basename}_LIBRARIES ${${basename}_LIBRARY_RELEASE}) - endif () +# SZIP_FOUND, true if the SZIP headers and libraries were found. +# SZIP_INCLUDE_DIR, the directory containing the SZIP headers. +# SZIP_INCLUDE_DIRS, the directory containing the SZIP headers. +# SZIP_LIBRARIES, libraries to link against to use SZIP. - # if only the debug version was found, set the release variable also to the debug version - if (${basename}_LIBRARY_DEBUG AND NOT ${basename}_LIBRARY_RELEASE) - set (${basename}_LIBRARY_RELEASE ${${basename}_LIBRARY_DEBUG}) - set (${basename}_LIBRARY ${${basename}_LIBRARY_DEBUG}) - set (${basename}_LIBRARIES ${${basename}_LIBRARY_DEBUG}) - endif () - if (${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE) - # if the generator supports configuration types then set - # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value - if (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) - set (${basename}_LIBRARY optimized ${${basename}_LIBRARY_RELEASE} debug ${${basename}_LIBRARY_DEBUG}) - else () - # if there are no configuration types and CMAKE_BUILD_TYPE has no value - # then just use the release libraries - set (${basename}_LIBRARY ${${basename}_LIBRARY_RELEASE} ) - endif () - set (${basename}_LIBRARIES optimized ${${basename}_LIBRARY_RELEASE} debug ${${basename}_LIBRARY_DEBUG}) - endif () +# Cache variables +################# - set (${basename}_LIBRARY ${${basename}_LIBRARY} CACHE FILEPATH "The ${basename} library") +# The following variables may also be set: - if (${basename}_LIBRARY) - set (${basename}_FOUND 1) - endif () - endif () +# SZIP_LIBRARY, where to find the SZIP library. +# SZIP_LIBRARY_DEBUG - Debug version of SZIP library +# SZIP_LIBRARY_RELEASE - Release Version of SZIP library - # Make variables changeble to the advanced user - MARK_AS_ADVANCED (${basename}_LIBRARY ${basename}_LIBRARY_RELEASE ${basename}_LIBRARY_DEBUG ${basename}_INCLUDE_DIR ) -endmacro () - - -# Look for the header file. -set (SZIP_INCLUDE_SEARCH_DIRS - $ENV{SZIP_INSTALL}/include - $ENV{SZIP_INSTALL}/include/szip - /usr/include - /usr/include/szip -) - -set (SZIP_LIB_SEARCH_DIRS - $ENV{SZIP_INSTALL}/lib - /usr/lib -) - -set (SZIP_BIN_SEARCH_DIRS - $ENV{SZIP_INSTALL}/bin - /usr/bin -) - -FIND_PATH (SZIP_INCLUDE_DIR - NAMES szlib.h - PATHS ${SZIP_INCLUDE_SEARCH_DIRS} - NO_DEFAULT_PATH -) - -if (WIN32) - set (SZIP_SEARCH_DEBUG_NAMES "sz_d;libsz_d") - set (SZIP_SEARCH_RELEASE_NAMES "sz;libsz;libszip") -else () - set (SZIP_SEARCH_DEBUG_NAMES "sz_d") - set (SZIP_SEARCH_RELEASE_NAMES "sz;szip") -endif () +# message (STATUS "Finding SZIP library and headers..." ) +######################################################################### -# Look for the library. -FIND_LIBRARY (SZIP_LIBRARY_DEBUG - NAMES ${SZIP_SEARCH_DEBUG_NAMES} - PATHS ${SZIP_LIB_SEARCH_DIRS} - NO_DEFAULT_PATH -) - -FIND_LIBRARY (SZIP_LIBRARY_RELEASE - NAMES ${SZIP_SEARCH_RELEASE_NAMES} - PATHS ${SZIP_LIB_SEARCH_DIRS} - NO_DEFAULT_PATH -) - -SZIP_ADJUST_LIB_VARS (SZIP) - -if (SZIP_INCLUDE_DIR AND SZIP_LIBRARY) - set (SZIP_FOUND 1) - set (SZIP_LIBRARIES ${SZIP_LIBRARY}) - set (SZIP_INCLUDE_DIRS ${SZIP_INCLUDE_DIR}) - if (SZIP_LIBRARY_DEBUG) - get_filename_component (SZIP_LIBRARY_PATH ${SZIP_LIBRARY_DEBUG} PATH) - set (SZIP_LIB_DIR ${SZIP_LIBRARY_PATH}) - elseif () - get_filename_component (SZIP_LIBRARY_PATH ${SZIP_LIBRARY_RELEASE} PATH) - set (SZIP_LIB_DIR ${SZIP_LIBRARY_PATH}) - endif () -else () - set (SZIP_FOUND 0) - set (SZIP_LIBRARIES) - set (SZIP_INCLUDE_DIRS) -endif () + +find_path(SZIP_INCLUDE_DIR szlib.h) + +set(szip_names ${SZIP_NAMES} sz szip szip-static libsz libszip libszip-static) +foreach(name ${szip_names}) + list (APPEND szip_names_debug "${name}d") +endforeach() + +if(NOT SZIP_LIBRARY) + find_library(SZIP_LIBRARY_RELEASE NAMES ${szip_names}) + find_library(SZIP_LIBRARY_DEBUG NAMES ${szip_names_debug}) + include(SelectLibraryConfigurations) + select_library_configurations(SZIP) + mark_as_advanced(SZIP_LIBRARY_RELEASE SZIP_LIBRARY_DEBUG) +endif() +unset(szip_names) +unset(szip_names_debug) + +if(SZIP_INCLUDE_DIR AND EXISTS "${SZIP_INCLUDE_DIR}/SZconfig.h") + file(STRINGS "${SZIP_INCLUDE_DIR}/SZconfig.h" szip_version_str + REGEX "^#define[\t ]+SZIP_PACKAGE_VERSION[\t ]+.*") + + string(REGEX REPLACE "^#define[\t ]+SZIP_PACKAGE_VERSION[\t ]+([0-9]+).*" + "\\1" SZIP_VERSION "${szip_version_str}") + unset(szip_version_str) +endif() + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(SZIP + REQUIRED_VARS SZIP_LIBRARY SZIP_INCLUDE_DIR + VERSION_VAR SZIP_VERSION) + +if(SZIP_FOUND) + set(SZIP_LIBRARIES ${SZIP_LIBRARY}) + set(SZIP_INCLUDE_DIRS "${SZIP_INCLUDE_DIR}") + + if(NOT TARGET SZIP::SZIP) + add_library(SZIP::SZIP UNKNOWN IMPORTED) + if(SZIP_INCLUDE_DIRS) + set_target_properties(SZIP::SZIP PROPERTIES + INTERFACE_INCLUDE_DIRECTORIES "${SZIP_INCLUDE_DIRS}") + endif() + if(EXISTS "${SZIP_LIBRARY}") + set_target_properties(SZIP::SZIP PROPERTIES + IMPORTED_LINK_INTERFACE_LANGUAGES "C" + IMPORTED_LOCATION "${SZIP_LIBRARY}") + endif() + if(EXISTS "${SZIP_LIBRARY_RELEASE}") + set_property(TARGET SZIP::SZIP APPEND PROPERTY + IMPORTED_CONFIGURATIONS RELEASE) + set_target_properties(SZIP::SZIP PROPERTIES + IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C" + IMPORTED_LOCATION_RELEASE "${SZIP_LIBRARY_RELEASE}") + endif() + if(EXISTS "${SZIP_LIBRARY_DEBUG}") + set_property(TARGET SZIP::SZIP APPEND PROPERTY + IMPORTED_CONFIGURATIONS DEBUG) + set_target_properties(SZIP::SZIP PROPERTIES + IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C" + IMPORTED_LOCATION_DEBUG "${SZIP_LIBRARY_DEBUG}") + endif() + endif() +endif() + +mark_as_advanced(SZIP_LIBRARY SZIP_INCLUDE_DIR) # Report the results. if (NOT SZIP_FOUND) @@ -153,29 +125,3 @@ if (NOT SZIP_FOUND) endif () endif () endif () - -if (SZIP_FOUND) - include (CheckSymbolExists) - ############################################# - # Find out if SZIP was build using dll's - ############################################# - # Save required variable - set (CMAKE_REQUIRED_INCLUDES_SAVE ${CMAKE_REQUIRED_INCLUDES}) - set (CMAKE_REQUIRED_FLAGS_SAVE ${CMAKE_REQUIRED_FLAGS}) - # Add SZIP_INCLUDE_DIR to CMAKE_REQUIRED_INCLUDES - set (CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${SZIP_INCLUDE_DIRS}") - - # Restore CMAKE_REQUIRED_INCLUDES and CMAKE_REQUIRED_FLAGS variables - set (CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_SAVE}) - set (CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS_SAVE}) - # - ############################################# -endif () - -if (FIND_SZIP_DEBUG) - message (STATUS "SZIP_INCLUDE_DIR: ${SZIP_INCLUDE_DIR}") - message (STATUS "SZIP_INCLUDE_DIRS: ${SZIP_INCLUDE_DIRS}") - message (STATUS "SZIP_LIBRARY_DEBUG: ${SZIP_LIBRARY_DEBUG}") - message (STATUS "SZIP_LIBRARY_RELEASE: ${SZIP_LIBRARY_RELEASE}") - message (STATUS "CMAKE_BUILD_TYPE: ${CMAKE_BUILD_TYPE}") -endif () diff --git a/config/cmake_ext_mod/HDFLibMacros.cmake b/config/cmake_ext_mod/HDFLibMacros.cmake index 54e408b..fe633bf 100644 --- a/config/cmake_ext_mod/HDFLibMacros.cmake +++ b/config/cmake_ext_mod/HDFLibMacros.cmake @@ -14,30 +14,13 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) # May need to build JPEG with PIC on x64 machines with gcc # Need to use CMAKE_ANSI_CFLAGS define so that compiler test works - if (${compress_type} MATCHES "SVN") - EXTERNALPROJECT_ADD (JPEG - SVN_REPOSITORY ${JPEG_URL} - # [SVN_REVISION rev] - INSTALL_COMMAND "" - CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} - -DJPEG_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} - -DJPEG_EXTERNALLY_CONFIGURED:BOOL=OFF - -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} - -DCMAKE_INSTALL_PREFIX:PATH=${CMAKE_INSTALL_PREFIX} - -DCMAKE_RUNTIME_OUTPUT_DIRECTORY:PATH=${CMAKE_RUNTIME_OUTPUT_DIRECTORY} - -DCMAKE_LIBRARY_OUTPUT_DIRECTORY:PATH=${CMAKE_LIBRARY_OUTPUT_DIRECTORY} - -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} - -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} - -DCMAKE_ANSI_CFLAGS:STRING=${jpeg_pic} - ) - elseif (${compress_type} MATCHES "GIT") + if (${compress_type} MATCHES "GIT") EXTERNALPROJECT_ADD (JPEG GIT_REPOSITORY ${JPEG_URL} GIT_TAG ${JPEG_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DJPEG_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DJPEG_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -47,6 +30,8 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${jpeg_pic} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) elseif (${compress_type} MATCHES "TGZ") EXTERNALPROJECT_ADD (JPEG @@ -54,7 +39,7 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DJPEG_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DJPEG_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -64,25 +49,19 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${jpeg_pic} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) endif () externalproject_get_property (JPEG BINARY_DIR SOURCE_DIR) ##include (${BINARY_DIR}/${JPEG_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) # Create imported target jpeg-static - add_library(jpeg-static STATIC IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (jpeg-static "jpeg" STATIC "") - add_dependencies (JPEG jpeg-static) - set (JPEG_STATIC_LIBRARY "jpeg-static") + add_library(${HDF_PACKAGE_NAMESPACE}jpeg-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}jpeg-static "jpeg" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}jpeg-static JPEG) + set (JPEG_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}jpeg-static") set (JPEG_LIBRARIES ${JPEG_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target jpeg-shared - add_library(jpeg-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (jpeg-shared "jpeg" SHARED "") - add_dependencies (JPEG jpeg-shared) - set (JPEG_SHARED_LIBRARY "jpeg-shared") - set (JPEG_LIBRARIES ${JPEG_LIBRARIES} ${JPEG_SHARED_LIBRARY}) - endif () set (JPEG_INCLUDE_DIR_GEN "${BINARY_DIR}") set (JPEG_INCLUDE_DIR "${SOURCE_DIR}/src") @@ -97,38 +76,20 @@ macro (PACKAGE_JPEG_LIBRARY compress_type) COMMENT "Copying ${JPEG_INCLUDE_DIR_GEN}/jconfig.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" ) set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/jconfig.h) - if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "SVN" OR ${compress_type} MATCHES "TGZ") + if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "TGZ") add_dependencies (JPEG-GenHeader-Copy JPEG) endif () endmacro () #------------------------------------------------------------------------------- macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) - if (${compress_type} MATCHES "SVN") - EXTERNALPROJECT_ADD (SZIP - SVN_REPOSITORY ${SZIP_URL} - # [SVN_REVISION rev] - INSTALL_COMMAND "" - CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} - -DSZIP_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} - -DSZIP_EXTERNALLY_CONFIGURED:BOOL=OFF - -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} - -DCMAKE_INSTALL_PREFIX:PATH=${CMAKE_INSTALL_PREFIX} - -DCMAKE_RUNTIME_OUTPUT_DIRECTORY:PATH=${CMAKE_RUNTIME_OUTPUT_DIRECTORY} - -DCMAKE_LIBRARY_OUTPUT_DIRECTORY:PATH=${CMAKE_LIBRARY_OUTPUT_DIRECTORY} - -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} - -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} - -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} - -DSZIP_ENABLE_ENCODING:BOOL=${encoding} - ) - elseif (${compress_type} MATCHES "GIT") + if (${compress_type} MATCHES "GIT") EXTERNALPROJECT_ADD (SZIP GIT_REPOSITORY ${SZIP_URL} GIT_TAG ${SZIP_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DSZIP_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DSZIP_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -139,6 +100,8 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} -DSZIP_ENABLE_ENCODING:BOOL=${encoding} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) elseif (${compress_type} MATCHES "TGZ") EXTERNALPROJECT_ADD (SZIP @@ -146,7 +109,7 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DSZIP_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DSZIP_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -157,25 +120,29 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} -DSZIP_ENABLE_ENCODING:BOOL=${encoding} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) endif () externalproject_get_property (SZIP BINARY_DIR SOURCE_DIR) -##include (${BINARY_DIR}/${SZIP_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) +##include (${BINARY_DIR}/${SZ_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) # Create imported target szip-static - add_library(szip-static STATIC IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (szip-static "szip" STATIC "") - add_dependencies (SZIP szip-static) - set (SZIP_STATIC_LIBRARY "szip-static") - set (SZIP_LIBRARIES ${SZIP_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target szip-shared - add_library(szip-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (szip-shared "szip" SHARED "") - add_dependencies (SZIP szip-shared) - set (SZIP_SHARED_LIBRARY "szip-shared") - set (SZIP_LIBRARIES ${SZIP_LIBRARIES} ${SZIP_SHARED_LIBRARY}) + if (USE_LIBAEC) + add_library(${HDF_PACKAGE_NAMESPACE}sz-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}sz-static "sz" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}sz-static SZIP) + add_library(${HDF_PACKAGE_NAMESPACE}aec-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}aec-static "aec" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}aec-static SZIP) + set (SZIP_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}sz-static;${HDF_PACKAGE_NAMESPACE}aec-static") + else () + add_library(${HDF_PACKAGE_NAMESPACE}szip-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}szip-static "szip" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}szip-static SZIP) + set (SZIP_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}szip-static") endif () + set (SZIP_LIBRARIES ${SZIP_STATIC_LIBRARY}) set (SZIP_INCLUDE_DIR_GEN "${BINARY_DIR}") set (SZIP_INCLUDE_DIR "${SOURCE_DIR}/src") @@ -185,42 +152,29 @@ endmacro () #------------------------------------------------------------------------------- macro (PACKAGE_SZIP_LIBRARY compress_type) + set (SZIP_HDR "SZconfig") + if (USE_LIBAEC) + set (SZIP_HDR "libaec_Export") + endif () add_custom_target (SZIP-GenHeader-Copy ALL - COMMAND ${CMAKE_COMMAND} -E copy_if_different ${SZIP_INCLUDE_DIR_GEN}/SZconfig.h ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/ - COMMENT "Copying ${SZIP_INCLUDE_DIR_GEN}/SZconfig.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" + COMMAND ${CMAKE_COMMAND} -E copy_if_different ${SZIP_INCLUDE_DIR_GEN}/${SZIP_HDR}.h ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/ + COMMENT "Copying ${SZIP_INCLUDE_DIR_GEN}/${SZIP_HDR}.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" ) - set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/SZconfig.h) - if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "SVN" OR ${compress_type} MATCHES "TGZ") + set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${SZIP_HDR}.h) + if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "TGZ") add_dependencies (SZIP-GenHeader-Copy SZIP) endif () endmacro () #------------------------------------------------------------------------------- macro (EXTERNAL_ZLIB_LIBRARY compress_type) - if (${compress_type} MATCHES "SVN") - EXTERNALPROJECT_ADD (ZLIB - SVN_REPOSITORY ${ZLIB_URL} - # [SVN_REVISION rev] - INSTALL_COMMAND "" - CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} - -DZLIB_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} - -DZLIB_EXTERNALLY_CONFIGURED:BOOL=OFF - -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} - -DCMAKE_INSTALL_PREFIX:PATH=${CMAKE_INSTALL_PREFIX} - -DCMAKE_RUNTIME_OUTPUT_DIRECTORY:PATH=${CMAKE_RUNTIME_OUTPUT_DIRECTORY} - -DCMAKE_LIBRARY_OUTPUT_DIRECTORY:PATH=${CMAKE_LIBRARY_OUTPUT_DIRECTORY} - -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} - -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} - -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} - ) - elseif (${compress_type} MATCHES "GIT") + if (${compress_type} MATCHES "GIT") EXTERNALPROJECT_ADD (ZLIB GIT_REPOSITORY ${ZLIB_URL} GIT_TAG ${ZLIB_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DZLIB_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DZLIB_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -230,6 +184,8 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) elseif (${compress_type} MATCHES "TGZ") EXTERNALPROJECT_ADD (ZLIB @@ -237,7 +193,7 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DZLIB_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DZLIB_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -247,6 +203,8 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) -DCMAKE_ARCHIVE_OUTPUT_DIRECTORY:PATH=${CMAKE_ARCHIVE_OUTPUT_DIRECTORY} -DCMAKE_PDB_OUTPUT_DIRECTORY:PATH=${CMAKE_PDB_OUTPUT_DIRECTORY} -DCMAKE_ANSI_CFLAGS:STRING=${CMAKE_ANSI_CFLAGS} + -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} + -DPACKAGE_NAMESPACE=${HDF_PACKAGE_NAMESPACE} ) endif () externalproject_get_property (ZLIB BINARY_DIR SOURCE_DIR) @@ -258,19 +216,12 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) endif () ##include (${BINARY_DIR}/${ZLIB_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) # Create imported target zlib-static - add_library(zlib-static STATIC IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (zlib-static ${ZLIB_LIB_NAME} STATIC "") - add_dependencies (ZLIB zlib-static) - set (ZLIB_STATIC_LIBRARY "zlib-static") + add_library(${HDF_PACKAGE_NAMESPACE}zlib-static STATIC IMPORTED) +# add_library(${HDF_PACKAGE_NAMESPACE}zlib-static ALIAS zlib-static) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}zlib-static ${ZLIB_LIB_NAME} STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}zlib-static ZLIB) + set (ZLIB_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}zlib-static") set (ZLIB_LIBRARIES ${ZLIB_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target zlib-shared - add_library(zlib-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (zlib-shared ${ZLIB_LIB_NAME} SHARED "") - add_dependencies (ZLIB zlib-shared) - set (ZLIB_SHARED_LIBRARY "zlib-shared") - set (ZLIB_LIBRARIES ${ZLIB_LIBRARIES} ${ZLIB_SHARED_LIBRARY}) - endif () set (ZLIB_INCLUDE_DIR_GEN "${BINARY_DIR}") set (ZLIB_INCLUDE_DIR "${SOURCE_DIR}") @@ -285,7 +236,7 @@ macro (PACKAGE_ZLIB_LIBRARY compress_type) COMMENT "Copying ${ZLIB_INCLUDE_DIR_GEN}/zconf.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" ) set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/zconf.h) - if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "SVN" OR ${compress_type} MATCHES "TGZ") + if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "TGZ") add_dependencies (ZLIB-GenHeader-Copy ZLIB) endif () endmacro () diff --git a/config/cmake_ext_mod/HDFMacros.cmake b/config/cmake_ext_mod/HDFMacros.cmake index 602b6bf..5740740 100644 --- a/config/cmake_ext_mod/HDFMacros.cmake +++ b/config/cmake_ext_mod/HDFMacros.cmake @@ -9,6 +9,33 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # + +#------------------------------------------------------------------------------- +macro (SET_HDF_BUILD_TYPE) + get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG) + if(_isMultiConfig) + set(HDF_CFG_NAME ${CMAKE_BUILD_TYPE}) + set(HDF_BUILD_TYPE ${CMAKE_CFG_INTDIR}) + set(HDF_CFG_BUILD_TYPE \${CMAKE_INSTALL_CONFIG_NAME}) + else() + set(HDF_CFG_BUILD_TYPE ".") + if(CMAKE_BUILD_TYPE) + set(HDF_CFG_NAME ${CMAKE_BUILD_TYPE}) + set(HDF_BUILD_TYPE ${CMAKE_BUILD_TYPE}) + else() + set(HDF_CFG_NAME "Release") + set(HDF_BUILD_TYPE "Release") + endif() + endif() + if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES) + message (STATUS "Setting build type to 'RelWithDebInfo' as none was specified.") + set(CMAKE_BUILD_TYPE RelWithDebInfo CACHE STRING "Choose the type of build." FORCE) + # Set the possible values of build type for cmake-gui + set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release" + "MinSizeRel" "RelWithDebInfo") + endif() +endmacro () + #------------------------------------------------------------------------------- macro (SET_GLOBAL_VARIABLE name value) set (${name} ${value} CACHE INTERNAL "Used to pass variables between directories" FORCE) @@ -45,30 +72,22 @@ macro (IDE_SOURCE_PROPERTIES SOURCE_PATH HEADERS SOURCES) endmacro () #------------------------------------------------------------------------------- -macro (TARGET_NAMING libtarget libtype) - if (${libtype} MATCHES "SHARED") - set_target_properties (${libtarget} PROPERTIES OUTPUT_NAME "${libtarget}${ARGN}") - endif () -endmacro () - -#------------------------------------------------------------------------------- macro (INSTALL_TARGET_PDB libtarget targetdestination targetcomponent) - if (WIN32 AND MSVC) + if (WIN32 AND MSVC AND NOT DISABLE_PDB_FILES) get_target_property (target_type ${libtarget} TYPE) if (${libtype} MATCHES "SHARED") set (targetfilename $<TARGET_PDB_FILE:${libtarget}>) else () - get_property (target_name TARGET ${libtarget} PROPERTY OUTPUT_NAME_RELWITHDEBINFO) + get_property (target_name TARGET ${libtarget} PROPERTY $<IF:$<CONFIG:Debug>,OUTPUT_NAME_DEBUG,OUTPUT_NAME_RELWITHDEBINFO>) set (targetfilename $<TARGET_FILE_DIR:${libtarget}>/${target_name}.pdb) endif () install ( - FILES - ${targetfilename} - DESTINATION - ${targetdestination} - CONFIGURATIONS RelWithDebInfo + FILES ${targetfilename} + DESTINATION ${targetdestination} + CONFIGURATIONS Debug RelWithDebInfo COMPONENT ${targetcomponent} - ) + OPTIONAL + ) endif () endmacro () @@ -76,47 +95,45 @@ endmacro () macro (INSTALL_PROGRAM_PDB progtarget targetdestination targetcomponent) if (WIN32 AND MSVC) install ( - FILES - $<TARGET_PDB_FILE:${progtarget}> - DESTINATION - ${targetdestination} - CONFIGURATIONS RelWithDebInfo + FILES $<TARGET_PDB_FILE:${progtarget}> + DESTINATION ${targetdestination} + CONFIGURATIONS Debug RelWithDebInfo COMPONENT ${targetcomponent} - ) + OPTIONAL + ) endif () endmacro () #------------------------------------------------------------------------------- macro (HDF_SET_LIB_OPTIONS libtarget libname libtype) if (${libtype} MATCHES "SHARED") - if (WIN32) - set (LIB_RELEASE_NAME "${libname}") - set (LIB_DEBUG_NAME "${libname}_D") - else () - set (LIB_RELEASE_NAME "${libname}") - set (LIB_DEBUG_NAME "${libname}_debug") - endif () + set (LIB_RELEASE_NAME "${libname}") + set (LIB_DEBUG_NAME "${libname}${CMAKE_DEBUG_POSTFIX}") else () - if (WIN32) + if (WIN32 AND NOT MINGW) set (LIB_RELEASE_NAME "lib${libname}") - set (LIB_DEBUG_NAME "lib${libname}_D") + set (LIB_DEBUG_NAME "lib${libname}${CMAKE_DEBUG_POSTFIX}") else () set (LIB_RELEASE_NAME "${libname}") - set (LIB_DEBUG_NAME "${libname}_debug") + set (LIB_DEBUG_NAME "${libname}${CMAKE_DEBUG_POSTFIX}") endif () endif () - set_target_properties (${libtarget} - PROPERTIES - OUTPUT_NAME_DEBUG ${LIB_DEBUG_NAME} + set_target_properties (${libtarget} PROPERTIES + OUTPUT_NAME ${LIB_RELEASE_NAME} +# OUTPUT_NAME_DEBUG ${LIB_DEBUG_NAME} OUTPUT_NAME_RELEASE ${LIB_RELEASE_NAME} OUTPUT_NAME_MINSIZEREL ${LIB_RELEASE_NAME} OUTPUT_NAME_RELWITHDEBINFO ${LIB_RELEASE_NAME} ) + #get_property (target_name TARGET ${libtarget} PROPERTY OUTPUT_NAME) + #get_property (target_name_debug TARGET ${libtarget} PROPERTY OUTPUT_NAME_DEBUG) + #get_property (target_name_rwdi TARGET ${libtarget} PROPERTY OUTPUT_NAME_RELWITHDEBINFO) + #message (STATUS "${target_name} : ${target_name_debug} : ${target_name_rwdi}") + if (${libtype} MATCHES "STATIC") if (WIN32) - set_target_properties (${libtarget} - PROPERTIES + set_target_properties (${libtarget} PROPERTIES COMPILE_PDB_NAME_DEBUG ${LIB_DEBUG_NAME} COMPILE_PDB_NAME_RELEASE ${LIB_RELEASE_NAME} COMPILE_PDB_NAME_MINSIZEREL ${LIB_RELEASE_NAME} @@ -128,8 +145,7 @@ macro (HDF_SET_LIB_OPTIONS libtarget libname libtype) #----- Use MSVC Naming conventions for Shared Libraries if (MINGW AND ${libtype} MATCHES "SHARED") - set_target_properties (${libtarget} - PROPERTIES + set_target_properties (${libtarget} PROPERTIES IMPORT_SUFFIX ".lib" IMPORT_PREFIX "" PREFIX "" @@ -144,7 +160,7 @@ macro (HDF_IMPORT_SET_LIB_OPTIONS libtarget libname libtype libversion) if (${importtype} MATCHES "IMPORT") set (importprefix "${CMAKE_STATIC_LIBRARY_PREFIX}") endif () - if (${CMAKE_BUILD_TYPE} MATCHES "Debug") + if (${HDF_CFG_NAME} MATCHES "Debug") set (IMPORT_LIB_NAME ${LIB_DEBUG_NAME}) else () set (IMPORT_LIB_NAME ${LIB_RELEASE_NAME}) @@ -159,12 +175,17 @@ macro (HDF_IMPORT_SET_LIB_OPTIONS libtarget libname libtype libversion) ) else () set_target_properties (${libtarget} PROPERTIES - IMPORTED_IMPLIB "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_BUILD_TYPE}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_IMPORT_LIBRARY_SUFFIX}" - IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_BUILD_TYPE}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}" + IMPORTED_IMPLIB "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${HDF_BUILD_TYPE}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_IMPORT_LIBRARY_SUFFIX}" + IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${HDF_BUILD_TYPE}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}" ) endif () else () - if (CYGWIN) + if (MINGW) + set_target_properties (${libtarget} PROPERTIES + IMPORTED_IMPLIB "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${IMPORT_LIB_NAME}.lib" + IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${IMPORT_LIB_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}" + ) + elseif (CYGWIN) set_target_properties (${libtarget} PROPERTIES IMPORTED_IMPLIB "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_IMPORT_LIBRARY_SUFFIX}" IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_IMPORT_LIBRARY_PREFIX}${IMPORT_LIB_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}" @@ -180,7 +201,7 @@ macro (HDF_IMPORT_SET_LIB_OPTIONS libtarget libname libtype libversion) else () if (WIN32 AND NOT MINGW) set_target_properties (${libtarget} PROPERTIES - IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_BUILD_TYPE}/${IMPORT_LIB_NAME}${CMAKE_STATIC_LIBRARY_SUFFIX}" + IMPORTED_LOCATION "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${HDF_BUILD_TYPE}/${IMPORT_LIB_NAME}${CMAKE_STATIC_LIBRARY_SUFFIX}" IMPORTED_LINK_INTERFACE_LANGUAGES "C" ) else () @@ -193,37 +214,14 @@ macro (HDF_IMPORT_SET_LIB_OPTIONS libtarget libname libtype libversion) endmacro () #------------------------------------------------------------------------------- -macro (TARGET_C_PROPERTIES wintarget libtype addcompileflags addlinkflags) - if (MSVC) - TARGET_MSVC_PROPERTIES (${wintarget} ${libtype} "${addcompileflags} ${WIN_COMPILE_FLAGS}" "${addlinkflags} ${WIN_LINK_FLAGS}") - else () - set_target_properties (${wintarget} PROPERTIES COMPILE_FLAGS "${addcompileflags}" LINK_FLAGS "${addlinkflags}") - endif () -endmacro () - -#------------------------------------------------------------------------------- -macro (TARGET_MSVC_PROPERTIES wintarget libtype addcompileflags addlinkflags) - if (MSVC) - set_target_properties (${wintarget} PROPERTIES COMPILE_FLAGS "${addcompileflags}" LINK_FLAGS "${addlinkflags}") - endif () -endmacro () - -#------------------------------------------------------------------------------- -macro (TARGET_FORTRAN_PROPERTIES forttarget libtype addcompileflags addlinkflags) - if (WIN32) - TARGET_FORTRAN_WIN_PROPERTIES (${forttarget} ${libtype} "${addcompileflags} ${WIN_COMPILE_FLAGS}" "${addlinkflags} ${WIN_LINK_FLAGS}") - endif () -endmacro () - -#------------------------------------------------------------------------------- -macro (TARGET_FORTRAN_WIN_PROPERTIES forttarget libtype addcompileflags addlinkflags) - if (MSVC) - if (${libtype} MATCHES "SHARED") - set_target_properties (${forttarget} PROPERTIES COMPILE_FLAGS "/dll ${addcompileflags}" LINK_FLAGS "/SUBSYSTEM:CONSOLE ${addlinkflags}") - else () - set_target_properties (${forttarget} PROPERTIES COMPILE_FLAGS "${addcompileflags}" LINK_FLAGS "/SUBSYSTEM:CONSOLE ${addlinkflags}") - endif () - endif () +macro (TARGET_C_PROPERTIES wintarget libtype) + target_compile_options(${wintarget} PRIVATE + $<$<C_COMPILER_ID:MSVC>:${WIN_COMPILE_FLAGS}> + $<$<CXX_COMPILER_ID:MSVC>:${WIN_COMPILE_FLAGS}> + ) + if(MSVC) + set_property(TARGET ${wintarget} APPEND PROPERTY LINK_FLAGS "${WIN_LINK_FLAGS}") + endif() endmacro () #----------------------------------------------------------------------------- @@ -251,6 +249,10 @@ macro (HDF_README_PROPERTIES target_fortran) set (BINARY_PLATFORM "${BINARY_PLATFORM} Intel") if (${CMAKE_C_COMPILER_VERSION} MATCHES "^17.*") set (BINARY_PLATFORM "${BINARY_PLATFORM}, using Intel 17") + elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^18.*") + set (BINARY_PLATFORM "${BINARY_PLATFORM}, using Intel 18") + elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^19.*") + set (BINARY_PLATFORM "${BINARY_PLATFORM}, using Intel 19") else () set (BINARY_PLATFORM "${BINARY_PLATFORM}, using Intel ${CMAKE_C_COMPILER_VERSION}") endif () @@ -265,16 +267,20 @@ macro (HDF_README_PROPERTIES target_fortran) elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^18.*") set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2013") elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^19.*") - set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2015") - elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^20.*") - set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2017") + if (${CMAKE_C_COMPILER_VERSION} MATCHES "^19.0.*") + set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2015") + elseif (${CMAKE_C_COMPILER_VERSION} MATCHES "^19.16.*") + set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2017") + else () #19.23 + set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO 2019") + endif () else () set (BINARY_PLATFORM "${BINARY_PLATFORM}, using VISUAL STUDIO ${CMAKE_C_COMPILER_VERSION}") endif () endif () elseif (APPLE) set (BINARY_EXAMPLE_ENDING "tar.gz") - set (BINARY_INSTALL_ENDING "dmg") + set (BINARY_INSTALL_ENDING "sh") # if packaging changes - use dmg set (BINARY_PLATFORM "${BINARY_PLATFORM} ${CMAKE_SYSTEM_VERSION} ${CMAKE_SYSTEM_PROCESSOR}") set (BINARY_PLATFORM "${BINARY_PLATFORM}, using ${CMAKE_C_COMPILER_ID} C ${CMAKE_C_COMPILER_VERSION}") else () @@ -288,7 +294,9 @@ macro (HDF_README_PROPERTIES target_fortran) set (BINARY_PLATFORM "${BINARY_PLATFORM} / ${CMAKE_Fortran_COMPILER_ID} Fortran") endif () - if (BUILD_SHARED_LIBS) + if (ONLY_SHARED_LIBS) + set (LIB_TYPE "Shared") + elseif (BUILD_SHARED_LIBS) set (LIB_TYPE "Static and Shared") else () set (LIB_TYPE "Static") @@ -309,3 +317,133 @@ macro (HDFTEST_COPY_FILE src dest target) ) list (APPEND ${target}_list "${dest}") endmacro () + +macro (HDF_DIR_PATHS package_prefix) + if (APPLE) + option (${package_prefix}_BUILD_FRAMEWORKS "TRUE to build as frameworks libraries, FALSE to build according to BUILD_SHARED_LIBS" FALSE) + endif () + + if (NOT ${package_prefix}_INSTALL_BIN_DIR) + set (${package_prefix}_INSTALL_BIN_DIR bin) + endif () + if (NOT ${package_prefix}_INSTALL_LIB_DIR) + if (APPLE) + if (${package_prefix}_BUILD_FRAMEWORKS) + set (${package_prefix}_INSTALL_JAR_DIR ../Java) + else () + set (${package_prefix}_INSTALL_JAR_DIR lib) + endif () + set (${package_prefix}_INSTALL_FMWK_DIR ${CMAKE_INSTALL_FRAMEWORK_PREFIX}) + else () + set (${package_prefix}_INSTALL_JAR_DIR lib) + endif () + set (${package_prefix}_INSTALL_LIB_DIR lib) + endif () + if (NOT ${package_prefix}_INSTALL_INCLUDE_DIR) + set (${package_prefix}_INSTALL_INCLUDE_DIR include) + endif () + if (NOT ${package_prefix}_INSTALL_DATA_DIR) + if (NOT WIN32) + if (APPLE) + if (${package_prefix}_BUILD_FRAMEWORKS) + set (${package_prefix}_INSTALL_EXTRA_DIR ../SharedSupport) + else () + set (${package_prefix}_INSTALL_EXTRA_DIR share) + endif () + set (${package_prefix}_INSTALL_FWRK_DIR ${CMAKE_INSTALL_FRAMEWORK_PREFIX}) + endif () + set (${package_prefix}_INSTALL_DATA_DIR share) + set (${package_prefix}_INSTALL_CMAKE_DIR share/cmake) + else () + set (${package_prefix}_INSTALL_DATA_DIR ".") + set (${package_prefix}_INSTALL_CMAKE_DIR cmake) + endif () + endif () + + # Always use full RPATH, i.e. don't skip the full RPATH for the build tree + set (CMAKE_SKIP_BUILD_RPATH FALSE) + # when building, don't use the install RPATH already + # (but later on when installing) + set (CMAKE_INSTALL_RPATH_USE_LINK_PATH FALSE) + # add the automatically determined parts of the RPATH + # which point to directories outside the build tree to the install RPATH + set (CMAKE_BUILD_WITH_INSTALL_RPATH ON) + if (APPLE) + set (CMAKE_INSTALL_NAME_DIR "@rpath") + set (CMAKE_INSTALL_RPATH + "@executable_path/../${${package_prefix}_INSTALL_LIB_DIR}" + "@executable_path/" + "@loader_path/../${${package_prefix}_INSTALL_LIB_DIR}" + "@loader_path/" + ) + else () + set (CMAKE_INSTALL_RPATH "\$ORIGIN/../${${package_prefix}_INSTALL_LIB_DIR}:\$ORIGIN/") + endif () + + if (DEFINED ADDITIONAL_CMAKE_PREFIX_PATH AND EXISTS "${ADDITIONAL_CMAKE_PREFIX_PATH}") + set (CMAKE_PREFIX_PATH ${ADDITIONAL_CMAKE_PREFIX_PATH} ${CMAKE_PREFIX_PATH}) + endif () + + #set the default debug suffix for all library targets + if(NOT CMAKE_DEBUG_POSTFIX) + if (WIN32) + set (CMAKE_DEBUG_POSTFIX "_D") + else () + set (CMAKE_DEBUG_POSTFIX "_debug") + endif () + endif () + + SET_HDF_BUILD_TYPE() + +#----------------------------------------------------------------------------- +# Setup output Directories +#----------------------------------------------------------------------------- + if (NOT ${package_prefix}_EXTERNALLY_CONFIGURED) + set (CMAKE_RUNTIME_OUTPUT_DIRECTORY + ${PROJECT_BINARY_DIR}/bin CACHE PATH "Single Directory for all Executables." + ) + set (CMAKE_LIBRARY_OUTPUT_DIRECTORY + ${PROJECT_BINARY_DIR}/bin CACHE PATH "Single Directory for all Libraries" + ) + set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY + ${PROJECT_BINARY_DIR}/bin CACHE PATH "Single Directory for all static libraries." + ) + set (CMAKE_Fortran_MODULE_DIRECTORY + ${PROJECT_BINARY_DIR}/bin CACHE PATH "Single Directory for all fortran modules." + ) + get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG) + if(_isMultiConfig) + set (CMAKE_TEST_OUTPUT_DIRECTORY ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${CMAKE_BUILD_TYPE}) + set (CMAKE_PDB_OUTPUT_DIRECTORY + ${PROJECT_BINARY_DIR}/bin CACHE PATH "Single Directory for all pdb files." + ) + else () + set (CMAKE_TEST_OUTPUT_DIRECTORY ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}) + endif () + else () + # if we are externally configured, but the project uses old cmake scripts + # this may not be set and utilities like H5detect will fail + if (NOT CMAKE_RUNTIME_OUTPUT_DIRECTORY) + set (CMAKE_RUNTIME_OUTPUT_DIRECTORY ${EXECUTABLE_OUTPUT_PATH}) + endif () + endif () +endmacro () + +macro (ADD_H5_FLAGS h5_flag_var infile) + file (STRINGS ${infile} TEST_FLAG_STREAM) + #message (STATUS "TEST_FLAG_STREAM=${TEST_FLAG_STREAM}") + list (LENGTH TEST_FLAG_STREAM len_flag) + if (len_flag GREATER 0) + math (EXPR _FP_LEN "${len_flag} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET TEST_FLAG_STREAM ${line} str_flag) + string (REGEX REPLACE "^#.*" "" str_flag "${str_flag}") + #message (STATUS "str_flag=${str_flag}") + if (str_flag) + list (APPEND ${h5_flag_var} "${str_flag}") + endif () + endforeach () + endif () + #message (STATUS "h5_flag_var=${${h5_flag_var}}") +endmacro () + diff --git a/config/cmake_ext_mod/HDFTests.c b/config/cmake_ext_mod/HDFTests.c index 60ac744..31a568a 100644 --- a/config/cmake_ext_mod/HDFTests.c +++ b/config/cmake_ext_mod/HDFTests.c @@ -88,25 +88,6 @@ int main(void) } #endif - -#ifdef TIME_WITH_SYS_TIME -/* Time with sys/time test */ - -#include <sys/types.h> -#include <sys/time.h> -#include <time.h> - -int -main () -{ -if ((struct tm *) 0) -return 0; - ; - return 0; -} - -#endif - #ifdef STDC_HEADERS #include <stdlib.h> #include <stdarg.h> @@ -162,26 +143,6 @@ main () #endif /* HAVE_FUNCTION */ -#ifdef HAVE_TM_GMTOFF - -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct tm tm; tm.tm_gmtoff=0); - -#endif /* HAVE_TM_GMTOFF */ - -#ifdef HAVE___TM_GMTOFF - -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct tm tm; tm.__tm_gmtoff=0); - -#endif /* HAVE_TM_GMTOFF */ - #ifdef HAVE_TIMEZONE #ifdef HAVE_SYS_TIME_H @@ -192,24 +153,6 @@ SIMPLE_TEST(timezone=0); #endif /* HAVE_TIMEZONE */ -#ifdef HAVE_STRUCT_TIMEZONE - -#include <sys/types.h> -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct timezone tz; tz.tz_minuteswest=0); - -#endif /* HAVE_STRUCT_TIMEZONE */ - -#ifdef HAVE_STAT_ST_BLOCKS - -#include <sys/stat.h> -SIMPLE_TEST(struct stat sb; sb.st_blocks=0); - -#endif /* HAVE_STAT_ST_BLOCKS */ - #ifdef PRINTF_LL_WIDTH #ifdef HAVE_LONG_LONG @@ -222,12 +165,26 @@ SIMPLE_TEST(struct stat sb; sb.st_blocks=0); #include <stdlib.h> #include <string.h> +#if defined(_MSC_VER) && defined(_DEBUG) +# include <crtdbg.h> +int DebugReport(int reportType, char* message, int* returnValue) +{ + (void)reportType; + (void)message; + (void)returnValue; + return 1; /* no further handling required */ +} +#endif + int main(void) { char *llwidthArgs[] = { "I64", "l64", "l", "L", "q", "ll", NULL }; char *s = malloc(128); char **currentArg = NULL; LL_TYPE x = (LL_TYPE)1048576 * (LL_TYPE)1048576; + #if defined(_MSC_VER) && defined(_DEBUG) + _CrtSetReportHook(DebugReport); + #endif for (currentArg = llwidthArgs; *currentArg != NULL; currentArg++) { char formatString[64]; @@ -305,16 +262,6 @@ int main() } #endif -#ifdef HAVE_STAT64_STRUCT -#include <sys/types.h> -#include <sys/stat.h>], -struct stat64 sb; -int main() -{ - return 0; -} -#endif - #ifdef TEST_DIRECT_VFD_WORKS #include <sys/types.h> #include <sys/stat.h> @@ -418,18 +365,6 @@ int main () #endif /* HAVE_IOEO */ -#ifdef HAVE_STRUCT_VIDEOCONFIG - -SIMPLE_TEST(struct videoconfig w; w.numtextcols=0); - -#endif /* HAVE_TM_GMTOFF */ - -#ifdef HAVE_STRUCT_TEXT_INFO - -SIMPLE_TEST(struct text_info w; w.screenwidth=0); - -#endif /* HAVE_TM_GMTOFF */ - #if defined( HAVE_INLINE ) || defined( HAVE___INLINE__ ) || defined( HAVE___INLINE ) #ifndef __cplusplus #if defined( HAVE_INLINE ) diff --git a/config/cmake_ext_mod/HDFUseCXX.cmake b/config/cmake_ext_mod/HDFUseCXX.cmake new file mode 100644 index 0000000..8d98147 --- /dev/null +++ b/config/cmake_ext_mod/HDFUseCXX.cmake @@ -0,0 +1,109 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# +# This file provides functions for C++ support. +# +#------------------------------------------------------------------------------- +ENABLE_LANGUAGE (CXX) +set (HDF_PREFIX "H5") + +#------------------------------------------------------------------------------- +# Fix CXX flags if we are compiling staticly on Windows using +# Windows_MT.cmake from config/cmake/UserMacros +#------------------------------------------------------------------------------- +if (BUILD_STATIC_CRT_LIBS) + TARGET_STATIC_CRT_FLAGS () +endif () + +#----------------------------------------------------------------------------- +# Configure Checks which require CXX compilation must go in here +# not in the main ConfigureChecks.cmake files, because if the user has +# no CXX compiler, problems arise. +#----------------------------------------------------------------------------- +include (CheckIncludeFileCXX) +include (TestForSTDNamespace) + +# IF the c compiler found stdint, check the C++ as well. On some systems this +# file will be found by C but not C++, only do this test IF the C++ compiler +# has been initialized (e.g. the project also includes some c++) +if (${HDF_PREFIX}_HAVE_STDINT_H AND CMAKE_CXX_COMPILER_LOADED) + CHECK_INCLUDE_FILE_CXX ("stdint.h" ${HDF_PREFIX}_HAVE_STDINT_H_CXX) + if (NOT ${HDF_PREFIX}_HAVE_STDINT_H_CXX) + set (${HDF_PREFIX}_HAVE_STDINT_H "" CACHE INTERNAL "Have includes HAVE_STDINT_H") + set (USE_INCLUDES ${USE_INCLUDES} "stdint.h") + endif () +endif () + +# For other CXX specific tests, use this MACRO. +macro (HDF_CXX_FUNCTION_TEST OTHER_TEST) + if (NOT DEFINED ${OTHER_TEST}) + set (MACRO_CHECK_FUNCTION_DEFINITIONS "-D${OTHER_TEST} ${CMAKE_REQUIRED_FLAGS}") + set (OTHER_TEST_ADD_LIBRARIES) + if (HDF5_REQUIRED_LIBRARIES) + set (OTHER_TEST_ADD_LIBRARIES "-DLINK_LIBRARIES:STRING=${HDF5_REQUIRED_LIBRARIES}") + endif () + + foreach (def + HAVE_SYS_TIME_H + HAVE_UNISTD_H + HAVE_SYS_TYPES_H + HAVE_SYS_SOCKET_H + HAVE_SYS_FILE_H + ) + if ("${${HDF_PREFIX}_${def}}") + set (MACRO_CHECK_FUNCTION_DEFINITIONS "${MACRO_CHECK_FUNCTION_DEFINITIONS} -D${def}") + endif () + endforeach () + + if (LARGEFILE) + set (MACRO_CHECK_FUNCTION_DEFINITIONS + "${MACRO_CHECK_FUNCTION_DEFINITIONS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE" + ) + endif () + + #message (STATUS "Performing ${OTHER_TEST}") + TRY_COMPILE (${OTHER_TEST} + ${CMAKE_BINARY_DIR} + ${HDF_RESOURCES_EXT_DIR}/HDFCXXTests.cpp + CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS} + "${OTHER_TEST_ADD_LIBRARIES}" + OUTPUT_VARIABLE OUTPUT + ) + if (${OTHER_TEST} EQUAL 0) + set (${OTHER_TEST} 1 CACHE INTERNAL "CXX test ${FUNCTION}") + message (STATUS "Performing CXX Test ${OTHER_TEST} - Success") + else () + message (STATUS "Performing CXX Test ${OTHER_TEST} - Failed") + set (${OTHER_TEST} "" CACHE INTERNAL "CXX test ${FUNCTION}") + file (APPEND ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log + "Performing CXX Test ${OTHER_TEST} failed with the following output:\n" + "${OUTPUT}\n" + ) + endif () + endif () +endmacro () + +#----------------------------------------------------------------------------- +# Check a bunch of cxx functions +#----------------------------------------------------------------------------- +if (CMAKE_CXX_COMPILER_LOADED) + foreach (cxx_test + OLD_HEADER_FILENAME + HDF_NO_NAMESPACE + HDF_NO_STD + BOOL_NOTDEFINED + NO_STATIC_CAST + CXX_HAVE_OFFSETOF + ) + HDF_CXX_FUNCTION_TEST (${cxx_test}) + endforeach () +endif () diff --git a/config/cmake_ext_mod/HDFUseFortran.cmake b/config/cmake_ext_mod/HDFUseFortran.cmake index 7bf4d81..0a6a092 100644 --- a/config/cmake_ext_mod/HDFUseFortran.cmake +++ b/config/cmake_ext_mod/HDFUseFortran.cmake @@ -13,7 +13,21 @@ # This file provides functions for Fortran support. # #------------------------------------------------------------------------------- -ENABLE_LANGUAGE (Fortran) +enable_language (Fortran) +set (HDF_PREFIX "H5") + +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + include (CheckFortranSourceRuns) + include (CheckFortranSourceCompiles) +endif () + +#------------------------------------------------------------------------------- +# Fix Fortran flags if we are compiling staticly on Windows using +# Windows_MT.cmake from config/cmake/UserMacros +#------------------------------------------------------------------------------- +if (BUILD_STATIC_CRT_LIBS) + TARGET_STATIC_CRT_FLAGS () +endif () #----------------------------------------------------------------------------- # Detect name mangling convention used between Fortran and C @@ -33,71 +47,15 @@ file (STRINGS ${CMAKE_BINARY_DIR}/FCMangle.h CONTENTS REGEX "H5_FC_GLOBAL_\\(.*, string (REGEX MATCH "H5_FC_GLOBAL_\\(.*,.*\\) +(.*)" RESULT ${CONTENTS}) set (H5_FC_FUNC_ "H5_FC_FUNC_(name,NAME) ${CMAKE_MATCH_1}") -#----------------------------------------------------------------------------- -# The provided CMake Fortran macros don't provide a general check function -# so this one is used for a sizeof test. -#----------------------------------------------------------------------------- -macro (CHECK_FORTRAN_FEATURE FUNCTION CODE VARIABLE) - message (STATUS "Testing Fortran ${FUNCTION}") - if (CMAKE_REQUIRED_LIBRARIES) - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}") - else () - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) - endif () - file (WRITE - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 - "${CODE}" - ) - TRY_COMPILE (RESULT_VAR - ${CMAKE_BINARY_DIR} - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 - CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" - OUTPUT_VARIABLE OUTPUT - ) - -# message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") -# message ( "Test result ${OUTPUT}") -# message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - - if (${RESULT_VAR}) - set (${VARIABLE} 1 CACHE INTERNAL "Have Fortran function ${FUNCTION}") - message (STATUS "Testing Fortran ${FUNCTION} - OK") - file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log - "Determining if the Fortran ${FUNCTION} exists passed with the following output:\n" - "${OUTPUT}\n\n" - ) - else () - message (STATUS "Testing Fortran ${FUNCTION} - Fail") - set (${VARIABLE} 0 CACHE INTERNAL "Have Fortran function ${FUNCTION}") - file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Determining if the Fortran ${FUNCTION} exists failed with the following output:\n" - "${OUTPUT}\n\n") - endif () -endmacro () - -#----------------------------------------------------------------------------- -# Configure Checks which require Fortran compilation must go in here -# not in the main ConfigureChecks.cmake files, because if the user has -# no Fortran compiler, problems arise. -# -# Be careful with leading spaces here, do not remove them. -#----------------------------------------------------------------------------- - -# Check for Non-standard extension intrinsic function SIZEOF -set (FORTRAN_HAVE_SIZEOF FALSE) -CHECK_FORTRAN_FEATURE(sizeof +#test code source +set (SIZEOF_CODE " PROGRAM main i = sizeof(x) END PROGRAM " - FORTRAN_HAVE_SIZEOF ) - -# Check for F2008 standard intrinsic function C_SIZEOF -set (FORTRAN_HAVE_C_SIZEOF FALSE) -CHECK_FORTRAN_FEATURE(c_sizeof +set (C_SIZEOF_CODE " PROGRAM main USE ISO_C_BINDING @@ -106,11 +64,8 @@ CHECK_FORTRAN_FEATURE(c_sizeof result = c_sizeof(a) END PROGRAM " - FORTRAN_HAVE_C_SIZEOF ) - -# Check for F2008 standard intrinsic function STORAGE_SIZE -CHECK_FORTRAN_FEATURE(storage_size +set (STORAGE_SIZE_CODE " PROGRAM main INTEGER :: a @@ -118,22 +73,15 @@ CHECK_FORTRAN_FEATURE(storage_size result = storage_size(a) END PROGRAM " - FORTRAN_HAVE_STORAGE_SIZE ) - -# Check for F2008 standard intrinsic module "ISO_FORTRAN_ENV" -set (HAVE_ISO_FORTRAN_ENV FALSE) -CHECK_FORTRAN_FEATURE(ISO_FORTRAN_ENV +set (ISO_FORTRAN_ENV_CODE " PROGRAM main USE, INTRINSIC :: ISO_FORTRAN_ENV END PROGRAM " - HAVE_ISO_FORTRAN_ENV ) - -set (FORTRAN_DEFAULT_REAL_NOT_DOUBLE FALSE) -CHECK_FORTRAN_FEATURE(RealIsNotDouble +set (REALISNOTDOUBLE_CODE " MODULE type_mod INTERFACE h5t @@ -156,14 +104,8 @@ CHECK_FORTRAN_FEATURE(RealIsNotDouble CALL h5t(d) END PROGRAM main " - FORTRAN_DEFAULT_REAL_NOT_DOUBLE ) - -#----------------------------------------------------------------------------- -# Checks if the ISO_C_BINDING module meets all the requirements -#----------------------------------------------------------------------------- -set (FORTRAN_HAVE_ISO_C_BINDING FALSE) -CHECK_FORTRAN_FEATURE(iso_c_binding +set (ISO_C_BINDING_CODE " PROGRAM main USE iso_c_binding @@ -175,15 +117,101 @@ CHECK_FORTRAN_FEATURE(iso_c_binding ptr = C_LOC(ichr(1:1)) END PROGRAM " - FORTRAN_HAVE_ISO_C_BINDING ) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + if (HDF5_REQUIRED_LIBRARIES) + set (CMAKE_REQUIRED_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}") + endif () + check_fortran_source_compiles (${SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF SRC_EXT f90) + check_fortran_source_compiles (${C_SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF SRC_EXT f90) + check_fortran_source_compiles (${STORAGE_SIZE_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE SRC_EXT f90) + check_fortran_source_compiles (${ISO_FORTRAN_ENV_CODE} ${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV SRC_EXT f90) + check_fortran_source_compiles (${REALISNOTDOUBLE_CODE} ${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE SRC_EXT f90) + check_fortran_source_compiles (${ISO_C_BINDING_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING SRC_EXT f90) +else () + #----------------------------------------------------------------------------- + # The provided CMake Fortran macros don't provide a general check function + # so this one is used for a sizeof test. + #----------------------------------------------------------------------------- + macro (CHECK_FORTRAN_FEATURE FUNCTION CODE VARIABLE) + message (STATUS "Testing Fortran ${FUNCTION}") + if (HDF5_REQUIRED_LIBRARIES) + set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES + "-DLINK_LIBRARIES:STRING=${HDF5_REQUIRED_LIBRARIES}") + else () + set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) + endif () + file (WRITE + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 + "${CODE}" + ) + TRY_COMPILE (RESULT_VAR + ${CMAKE_BINARY_DIR} + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 + CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" + OUTPUT_VARIABLE OUTPUT + ) + + # message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + # message (STATUS "Test result ${OUTPUT}") + # message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + + if (${RESULT_VAR}) + set (${VARIABLE} 1 CACHE INTERNAL "Have Fortran function ${FUNCTION}") + message (STATUS "Testing Fortran ${FUNCTION} - OK") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + "Determining if the Fortran ${FUNCTION} exists passed with the following output:\n" + "${OUTPUT}\n\n" + ) + else () + message (STATUS "Testing Fortran ${FUNCTION} - Fail") + set (${VARIABLE} 0 CACHE INTERNAL "Have Fortran function ${FUNCTION}") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + "Determining if the Fortran ${FUNCTION} exists failed with the following output:\n" + "${OUTPUT}\n\n") + endif () + endmacro () + + #----------------------------------------------------------------------------- + # Configure Checks which require Fortran compilation must go in here + # not in the main ConfigureChecks.cmake files, because if the user has + # no Fortran compiler, problems arise. + # + # Be careful with leading spaces here, do not remove them. + #----------------------------------------------------------------------------- + + # Check for Non-standard extension intrinsic function SIZEOF + set (${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF FALSE) + CHECK_FORTRAN_FEATURE(sizeof_code ${SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF) + + # Check for F2008 standard intrinsic function C_SIZEOF + set (${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF FALSE) + CHECK_FORTRAN_FEATURE(c_sizeof_code ${C_SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF) + + # Check for F2008 standard intrinsic function STORAGE_SIZE + CHECK_FORTRAN_FEATURE(storage_size_code ${STORAGE_SIZE_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE) + + # Check for F2008 standard intrinsic module "ISO_FORTRAN_ENV" + set (${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV FALSE) + CHECK_FORTRAN_FEATURE(iso_fortran_env_code ${ISO_FORTRAN_ENV_CODE} ${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV) + + set (${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE FALSE) + CHECK_FORTRAN_FEATURE(realisnotdouble_code ${REALISNOTDOUBLE_CODE} ${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE) + + #----------------------------------------------------------------------------- + # Checks if the ISO_C_BINDING module meets all the requirements + #----------------------------------------------------------------------------- + set (${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING FALSE) + CHECK_FORTRAN_FEATURE(iso_c_binding_code ${ISO_C_BINDING_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING) +endif () + #----------------------------------------------------------------------------- # Add debug information (intel Fortran : JB) #----------------------------------------------------------------------------- if (CMAKE_Fortran_COMPILER MATCHES ifort) - if (WIN32) - set (CMAKE_Fortran_FLAGS_DEBUG "/debug:full /dbglibs " CACHE "flags" STRING FORCE) - set (CMAKE_EXE_LINKER_FLAGS_DEBUG "/DEBUG" CACHE "flags" STRING FORCE) + if (WIN32 AND NOT MINGW) + set (CMAKE_Fortran_FLAGS_DEBUG "/debug:full /dbglibs " CACHE STRING "flags" FORCE) + set (CMAKE_EXE_LINKER_FLAGS_DEBUG "/DEBUG" CACHE STRING "flags" FORCE) endif () endif () diff --git a/config/cmake_ext_mod/grepTest.cmake b/config/cmake_ext_mod/grepTest.cmake index 5b0e8fd..b011ae8 100644 --- a/config/cmake_ext_mod/grepTest.cmake +++ b/config/cmake_ext_mod/grepTest.cmake @@ -20,7 +20,7 @@ endif () # message (STATUS "Require TEST_ARGS to be defined") #endif () if (NOT TEST_FOLDER) - message ( FATAL_ERROR "Require TEST_FOLDER to be defined") + message (FATAL_ERROR "Require TEST_FOLDER to be defined") endif () if (NOT TEST_OUTPUT) message (FATAL_ERROR "Require TEST_OUTPUT to be defined") @@ -29,17 +29,38 @@ endif () # message (STATUS "Require TEST_EXPECT to be defined") #endif () if (NOT TEST_FILTER) - message (STATUS "Require TEST_FILTER to be defined") + message (STATUS "Optional TEST_FILTER to be defined") endif () if (NOT TEST_REFERENCE) message (FATAL_ERROR "Require TEST_REFERENCE to be defined") endif () -message (STATUS "COMMAND: ${TEST_PROGRAM} ${TEST_ARGS}") +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) +endif () + +message (STATUS "COMMAND: ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS}") + +if (TEST_LIBRARY_DIRECTORY) + if (WIN32 OR MINGW) + set (ENV{PATH} "$ENV{PATH};${TEST_LIBRARY_DIRECTORY}") + else () + set (ENV{LD_LIBRARY_PATH} "$ENV{LD_LIBRARY_PATH}:${TEST_LIBRARY_DIRECTORY}") + endif () +endif () + +if (TEST_ENV_VAR) + set (ENV{${TEST_ENV_VAR}} "${TEST_ENV_VALUE}") + #message (STATUS "ENV:${TEST_ENV_VAR}=$ENV{${TEST_ENV_VAR}}") +endif () # run the test program, capture the stdout/stderr and the result var execute_process ( - COMMAND ${TEST_PROGRAM} ${TEST_ARGS} + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_OUTPUT} @@ -49,27 +70,130 @@ execute_process ( ) message (STATUS "COMMAND Result: ${TEST_RESULT}") + message (STATUS "COMMAND Error: ${TEST_ERROR}") -# now grep the output with the reference +# remove special output file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) +string (FIND TEST_STREAM "_pmi_alps" "${TEST_FIND_RESULT}") +if (TEST_FIND_RESULT GREATER 0) + string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_STREAM}) +endif () + +# if the TEST_ERRREF exists grep the error output with the error reference +set (TEST_ERRREF_RESULT 0) +if (TEST_ERRREF) + # if the .err file exists grep the error output with the error reference before comparing stdout + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_ERR_STREAM) + list (LENGTH TEST_ERR_STREAM test_len) + if (test_len GREATER 0) + # TEST_ERRREF should always be matched + string (REGEX MATCH "${TEST_ERRREF}" TEST_MATCH ${TEST_ERR_STREAM}) + string (COMPARE EQUAL "${TEST_ERRREF}" "${TEST_MATCH}" TEST_ERRREF_RESULT) + if (NOT TEST_ERRREF_RESULT) + message (FATAL_ERROR "Failed: The error output of ${TEST_PROGRAM} did not contain ${TEST_ERRREF}") + endif () + endif () + endif () + + #always compare output file to reference unless this must be skipped + set (TEST_COMPARE_RESULT 0) + if (NOT TEST_SKIP_COMPARE) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") + endif () + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () + endif () + + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) + endif () + endif () + endif () -# TEST_REFERENCE should always be matched -string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) -string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) -if (${TEST_RESULT} STREQUAL "0") - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") + + # again, if return value is !=0 scream and shout + if (TEST_COMPARE_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + endif () + endif () + endif () +else () + # else grep the output with the reference + set (TEST_GREP_RESULT 0) + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () endif () -string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) -if (${TEST_EXPECT} STREQUAL "1") - # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match - string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT ${TEST_RESULT} STREQUAL "0") - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + +if (TEST_FILTER) + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () endif () endif () # everything went fine... -message ("Passed: The output of ${TEST_PROGRAM} matched") +message (STATUS "Passed: The output of ${TEST_PROGRAM} matched") diff --git a/config/cmake_ext_mod/runTest.cmake b/config/cmake_ext_mod/runTest.cmake index 3a02614..2b8b6b0 100644 --- a/config/cmake_ext_mod/runTest.cmake +++ b/config/cmake_ext_mod/runTest.cmake @@ -18,7 +18,7 @@ if (NOT TEST_PROGRAM) message (FATAL_ERROR "Require TEST_PROGRAM to be defined") endif () if (NOT TEST_FOLDER) - message ( FATAL_ERROR "Require TEST_FOLDER to be defined") + message (FATAL_ERROR "Require TEST_FOLDER to be defined") endif () if (NOT TEST_OUTPUT) message (FATAL_ERROR "Require TEST_OUTPUT to be defined") @@ -26,27 +26,19 @@ endif () if (NOT TEST_EXPECT) message (STATUS "Require TEST_EXPECT to be defined") endif () -if (NOT TEST_SKIP_COMPARE AND NOT TEST_REFERENCE) - message (FATAL_ERROR "Require TEST_REFERENCE to be defined") -endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) endif () -if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) endif () -# if there is not an error reference file add the error output to the stdout file -if (NOT TEST_ERRREF) - set (ERROR_APPEND 1) -endif () - -message (STATUS "COMMAND: ${TEST_PROGRAM} ${TEST_ARGS}") +message (STATUS "COMMAND: ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS}") if (TEST_LIBRARY_DIRECTORY) - if (WIN32 AND NOT MINGW) + if (WIN32 OR MINGW) set (ENV{PATH} "$ENV{PATH};${TEST_LIBRARY_DIRECTORY}") else () set (ENV{LD_LIBRARY_PATH} "$ENV{LD_LIBRARY_PATH}:${TEST_LIBRARY_DIRECTORY}") @@ -55,12 +47,13 @@ endif () if (TEST_ENV_VAR) set (ENV{${TEST_ENV_VAR}} "${TEST_ENV_VALUE}") + #message (STATUS "ENV:${TEST_ENV_VAR}=$ENV{${TEST_ENV_VAR}}") endif () if (NOT TEST_INPUT) # run the test program, capture the stdout/stderr and the result var execute_process ( - COMMAND ${TEST_PROGRAM} ${TEST_ARGS} + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT OUTPUT_FILE ${TEST_OUTPUT} @@ -71,7 +64,7 @@ if (NOT TEST_INPUT) else () # run the test program with stdin, capture the stdout/stderr and the result var execute_process ( - COMMAND ${TEST_PROGRAM} ${TEST_ARGS} + COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_ARGS} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT INPUT_FILE ${TEST_INPUT} @@ -87,7 +80,7 @@ if (TEST_REGEX) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) string (REGEX MATCH "${TEST_REGEX}" REGEX_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${REGEX_MATCH}" "${TEST_MATCH}" REGEX_RESULT) - if (${REGEX_RESULT} STREQUAL "0") + if (NOT REGEX_RESULT) message (STATUS "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_MATCH}") endif () endif () @@ -95,9 +88,24 @@ endif () message (STATUS "COMMAND Result: ${TEST_RESULT}") # if the .err file exists and ERRROR_APPEND is enabled -if (ERROR_APPEND AND EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) - file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () + # remove special output + string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") + + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () + endif () endif () # append the test result status with a predefined text @@ -106,9 +114,9 @@ if (TEST_APPEND) endif () # if the return value is !=${TEST_EXPECT} bail out -if (NOT ${TEST_RESULT} STREQUAL ${TEST_EXPECT}) +if (NOT TEST_RESULT EQUAL TEST_EXPECT) if (NOT TEST_NOERRDISPLAY) - if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) message (STATUS "Output :\n${TEST_STREAM}") endif () @@ -118,6 +126,33 @@ endif () message (STATUS "COMMAND Error: ${TEST_ERROR}") +# remove special output +file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) +string (FIND "${TEST_STREAM}" "_pmi_alps" TEST_FIND_RESULT) +if (TEST_FIND_RESULT GREATER -1) + string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_STREAM}) +endif () + +# remove special error output +if (NOT TEST_ERRREF) + # the error stack has been appended to the output file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) +else () + # the error stack remains in the .err file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) +endif () +string (FIND "${TEST_STREAM}" "no version information available" TEST_FIND_RESULT) +if (TEST_FIND_RESULT GREATER -1) + string (REGEX REPLACE "^.*no version information available[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") + # write back the changes to the original files + if (NOT TEST_ERRREF) + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + else () + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + endif () +endif () + # if the output file needs Storage text removed if (TEST_MASK) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) @@ -128,7 +163,7 @@ endif () # if the output file needs Modified text removed if (TEST_MASK_MOD) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) - string (REGEX REPLACE "Modified:[^\n]+\n" "Modified: XXXX-XX-XX XX:XX:XX XXX\n" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "Modified:[^\n]+\n" "Modified: XXXX-XX-XX XX:XX:XX XXX\n" TEST_STREAM "${TEST_STREAM}") file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") endif () @@ -166,123 +201,177 @@ endif () if (TEST_REF_FILTER) #message (STATUS "TEST_REF_FILTER: ${TEST_APPEND}${TEST_REF_FILTER}") file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - STRING(REGEX REPLACE "${TEST_REF_APPEND}" "${TEST_REF_FILTER}" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "${TEST_REF_APPEND}" "${TEST_REF_FILTER}" TEST_STREAM "${TEST_STREAM}") file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") endif () # compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) if (NOT TEST_SKIP_COMPARE) - if (WIN32 AND NOT MINGW) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") - endif () + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") + endif () - if (NOT TEST_SORT_COMPARE) - # now compare the output with the reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} - RESULT_VARIABLE TEST_RESULT - ) - else () - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) - list (SORT v1) - list (SORT v2) - if (NOT v1 STREQUAL v2) - set(TEST_RESULT 1) - endif () - endif () + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () + endif () - if (NOT ${TEST_RESULT} STREQUAL 0) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) - list (LENGTH test_ref len_ref) - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") - math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") - set (TEST_RESULT 1) - message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () endif () - endforeach () - else () - if (${len_act} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") - endif () - if (${len_ref} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) + endif () endif () endif () - if (NOT ${len_act} STREQUAL ${len_ref}) - set (TEST_RESULT 1) - endif () - endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") - # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) - message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + # again, if return value is !=0 scream and shout + if (TEST_COMPARE_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + endif () endif () # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) if (TEST_ERRREF) - if (WIN32 AND NOT MINGW) - file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) - file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") - endif () + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") + endif () - # now compare the error output with the error reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} - RESULT_VARIABLE TEST_RESULT - ) - if (NOT ${TEST_RESULT} STREQUAL 0) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) - list (LENGTH test_ref len_ref) - math (EXPR _FP_LEN "${len_ref} - 1") - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") - set (TEST_RESULT 1) - message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") - endif () + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () - endforeach () - else () - if (${len_act} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if (${len_ref} STREQUAL "0") - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) endif () endif () - if (NOT ${len_act} STREQUAL ${len_ref}) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) + if (TEST_ERRREF_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () endif () +set (TEST_GREP_RESULT 0) +if (TEST_GREP_COMPARE) + # now grep the output with the reference + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () + + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () + endif () + endif () +endif () + +# dump the output unless nodisplay option is set +if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY) + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + execute_process ( + COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM} + RESULT_VARIABLE TEST_RESULT + ) +endif () + # everything went fine... -message ("Passed: The output of ${TEST_PROGRAM} matches ${TEST_REFERENCE}") +message (STATUS "${TEST_PROGRAM} Passed") + diff --git a/config/commence.am b/config/commence.am index 5fe21a6..6e3d9a9 100644 --- a/config/commence.am +++ b/config/commence.am @@ -44,15 +44,15 @@ LIBH5CPP_HL=$(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Install directories that automake doesn't know about docdir = $(exec_prefix)/doc -# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below -# has been removed. According to the official description of DESTDIR by Gnu at -# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is -# prepended to the normal and complete install path that it precedes for the -# purpose of installing in a temporary directory which is useful for building -# rpms and other packages. The '/' after ${DESTDIR} will be followed by another -# '/' at the beginning of the normal install path. When DESTDIR is empty the -# path then begins with '//', which is incorrect and causes problems at least for -# Cygwin. +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by Gnu at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with @@ -62,17 +62,17 @@ H5CC_PP=${DESTDIR}$(bindir)/h5pcc H5FC=${DESTDIR}$(bindir)/h5fc H5FC_PP=${DESTDIR}$(bindir)/h5pfc H5CPP=${DESTDIR}$(bindir)/h5c++ - + # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. -# AM_CFLAGS is an automake construct which should be used by Makefiles +# AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. -AM_CFLAGS=@AM_CFLAGS@ @H5_CFLAGS@ +AM_CFLAGS=@AM_CFLAGS@ @H5_CFLAGS@ @H5_ECFLAGS@ AM_FCFLAGS=@AM_FCFLAGS@ @H5_FCFLAGS@ -AM_CXXFLAGS=@AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_CXXFLAGS=@AM_CXXFLAGS@ @H5_CXXFLAGS@ @H5_ECXXFLAGS@ AM_CPPFLAGS=@AM_CPPFLAGS@ @H5_CPPFLAGS@ AM_LDFLAGS=@AM_LDFLAGS@ @H5_LDFLAGS@ @@ -97,7 +97,8 @@ CHECK_CLEANFILES=*.chkexe *.chklog *.clog *.clog2 # exists. .PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ build-tests check-clean check-install check-p check-s check-vfd \ - install-doc lib progs tests uninstall-doc _exec_check-s _test help + check-passthrough-vol install-doc lib progs tests uninstall-doc \ + _exec_check-s _test help help: @$(top_srcdir)/bin/makehelp diff --git a/config/conclude.am b/config/conclude.am index 55b805a..3f05a69 100644 --- a/config/conclude.am +++ b/config/conclude.am @@ -16,27 +16,25 @@ ## Textually included at the end of most HDF5 Makefiles.am. ## Contains build rules. -# Automake needs to be taught how to build lib, dyn, progs and tests targets. +# Automake needs to be taught how to build lib, progs and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) -DYN = $(dyn_LTLIBRARIES) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) -chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) -TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST) -dyndir=$(libdir) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST) TEST_EXTENSIONS = .sh SH_LOG_COMPILER = $(SHELL) AM_SH_LOG_FLAGS = +REALTIMEOUTPUT = $(realtimeOutput) # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -build-dyn: $(DYN) build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(chk_TESTS) @@ -44,7 +42,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else # in the directory (e.g., for Fortran type detection) -lib dyn progs tests check-s check-p :: $(BUILT_SOURCES) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -70,7 +68,7 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target -# is depreciated. +# is deprecated. install-doc uninstall-doc: @echo "Nothing to be done." @@ -127,31 +125,80 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ else \ - echo "============================" > $${log}; \ - if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ - else \ - echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - fi; \ - echo "============================" >> $${log}; \ - srcdir="$(srcdir)" \ - $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch $(@:.chkexe_=.chkexe) || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - (cat $${log} && false) || exit 1; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "============================" | tee $${log}; \ + else \ + echo "============================" > $${log}; \ + fi; \ + if test "X$(FORTRAN_API)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + else \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ + fi; \ + elif test "X$(CXX_API)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log};\ + else \ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" >> $${log};\ + fi; \ + else \ + echo "Testing: $${tname} $(TEST_FLAGS)"; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + else \ + echo "Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + if test -n "$(HDF5_VOL_CONNECTOR)"; then \ + echo "VOL connector: $(HDF5_VOL_CONNECTOR)" | tee -a $${log}; \ + fi; \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" | tee -a $${log}; \ + fi; \ + else \ + if test -n "$(HDF5_VOL_CONNECTOR)"; then \ + echo "VOL connector: $(HDF5_VOL_CONNECTOR)" >> $${log}; \ + fi; \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "============================" | tee -a $${log}; \ + else \ + echo "============================" >> $${log}; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) | tee -a $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + else \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + fi; \ echo "" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ - echo "============================" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)"; \ - cat $${log}; \ + if test -n "$(REALTIMEOUTPUT)"; then \ + echo "Finished testing $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ + echo "============================" | tee -a $${log}; \ + else \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + fi; \ + if test -z "$(REALTIMEOUTPUT)"; then \ + cat $${log}; \ + fi; \ fi; \ fi - + # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. @@ -202,7 +249,7 @@ build-check-p: $(LIB) $(PROGS) $(chk_TESTS) echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ - echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo "Set HDF5_PARAPREFIX to use another directory. e.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ @@ -234,3 +281,17 @@ check-vfd: $(LIB) $(PROGS) $(chk_TESTS) HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ fi; \ done + +# Run test with different passthrough Virtual Object Layer Connector +# NOTE: Will only succeed with passthrough VOL connectors that use +# the native VOL connector as the terminal connector. +check-passthrough-vol: $(LIB) $(PROGS) $(chk_TESTS) + @for vol in $(VOL_LIST) dummy; do \ + if test "$$vol" != dummy; then \ + echo "============================"; \ + echo "Testing VOL Connector: \"$$vol\""; \ + echo "============================"; \ + $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ + HDF5_VOL_CONNECTOR="$$vol" $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ + fi; \ + done diff --git a/config/examples.am b/config/examples.am index 247dfa8..e06f4ea 100644 --- a/config/examples.am +++ b/config/examples.am @@ -33,7 +33,7 @@ ## INSTALL_TOP_FILES ## ## EXAMPLEDIR -## The directory into which examples should be installed. +## The directory into which examples should be installed. ## ## Build rules for $(EXTRA_PROG). ## Dependencies for example programs. @@ -62,7 +62,7 @@ install-data-local: uninstall-local: @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples -install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) +install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) @for f in X $(INSTALL_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \ @@ -109,7 +109,7 @@ installcheck-local: H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \ else \ $(MAKE) $(AM_MAKEFLAGS) check; \ - fi + fi @if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \ echo "============================"; \ echo "Testing $(TEST_EXAMPLES_SCRIPT)"; \ diff --git a/config/gnu-cxxflags b/config/gnu-cxxflags index e0f2999..44cbc69 100644 --- a/config/gnu-cxxflags +++ b/config/gnu-cxxflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,46 +17,80 @@ # if the compiler is not GNU; otherwise `cxx_flags_set' is set to `yes' # +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for g++ # unless a compiler version is already known # # cxx_vendor: The compiler name: g++ # cxx_version: Version number: 2.91.60, 2.7.2.1 # -if test X = "X$cxx_flags_set"; then +if test "X-" = "X-$cxx_flags_set"; then # PathScale compiler spits out gcc version string too. Need to # filter it out. # icc beginning with version 12 includes a "gcc version compatiblilty" - # string, causing the gcc H5_CFLAGS to be erroneously added. The line + # string, causing the gcc H5_CXXFLAGS to be erroneously added. The line # "grep -v 'icc version'" causes the discarding of any output - # containing 'icc version'. The cc_version for icc is correctly determined + # containing 'icc version'. The cxx_version for icc is correctly determined # and flags added in the intel-flags script. cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 | grep -v 'PathScale' |\ - grep -v 'icc version' |\ + grep -v '^icc.*version' |\ grep 'gcc version' | sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" cxx_vendor=`echo $cxx_version |sed 's/\([a-z]*\).*/\1/'` cxx_version=`echo $cxx_version |sed 's/[-a-z]//g'` if test X = "X$cxx_vendor" -a X != "X$cxx_version"; then - cxx_vendor=g++ + cxx_vendor=g++ fi if test "-" != "$cxx_vendor-$cxx_version"; then - echo "compiler '$CXX' is GNU $cxx_vendor-$cxx_version" + echo "compiler '$CXX' is GNU $cxx_vendor-$cxx_version" fi - # Some version numbers + # Get the compiler version numbers cxx_vers_major=`echo $cxx_version | cut -f1 -d.` cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` - test -n "$cc_vers_major" || cxx_vers_major=0 - test -n "$cc_vers_minor" || cxx_vers_minor=0 - test -n "$cc_vers_patch" || cxx_vers_patch=0 + test -n "$cxx_vers_major" || cxx_vers_major=0 + test -n "$cxx_vers_minor" || cxx_vers_minor=0 + test -n "$cxx_vers_patch" || cxx_vers_patch=0 cxx_vers_all=`expr $cxx_vers_major '*' 1000000 + $cxx_vers_minor '*' 1000 + $cxx_vers_patch` fi -# Common g++ flags for various situations -case "$cxx_vendor-$cxx_version" in - g++*) - # Architecture-specific flags +if test "X-g++" = "X-$cxx_vendor"; then + + ############################### + # Architecture-specific flags # + ############################### + arch= case "$host_os-$host_cpu" in # FreeBSD sets the information from "uname -m" to the general machine @@ -84,742 +118,143 @@ case "$cxx_vendor-$cxx_version" in ;; esac - # Host-specific flags - case "`hostname`" in - sleipnir.ncsa.uiuc.edu) - arch="$arch -pipe" - ;; - esac - - # General (copied from H5_CFLAGS) - H5_CXXFLAGS="$H5_CXXFLAGS $arch -pedantic -Wall -W -Wundef -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Wredundant-decls -Winline" - # C++-specific - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-promo -Woverloaded-virtual -Wold-style-cast -Weffc++ -Wreorder -Wnon-virtual-dtor -Wctor-dtor-privacy -Wabi" + H5_CXXFLAGS="$H5_CXXFLAGS $arch" + + ############## + # Production # + ############## - # Production # NDEBUG is handled explicitly by the configure script - case "$cxx_vendor-$cxx_version" in - g++-[34].*) + if test $cxx_vers_major -le 4; then PROD_CXXFLAGS= - ;; - g++-[56].*) + else PROD_CXXFLAGS="-fstdarg-opt" - ;; - *) - PROD_CXXFLAGS="-finline-functions" - ;; - esac + fi + + ######### + # Debug # + ######### - # Debug # NDEBUG is handled explicitly by the configure script - # -g is hanled by the symbols flags - case "$cxx_vendor-$cxx_version" in - g++-[56].*) - DEBUG_CXXFLAGS="-ftrapv -fno-common" - ;; - *) + # -g is handled by the symbols flags + if test $cxx_vers_major -le 4; then DEBUG_CXXFLAGS= - ;; - esac + else + DEBUG_CXXFLAGS="-ftrapv -fno-common" + fi + + ########### + # Symbols # + ########### - # Symbols NO_SYMBOLS_CXXFLAGS="-s" SYMBOLS_CXXFLAGS="-g" - # Profile + ############# + # Profiling # + ############# + PROFILE_CXXFLAGS="-pg" - # Optimization - case "$cxx_vendor-$cxx_version" in - g++-[34].*) + ################ + # Optimization # + ################ + + if test $cxx_vers_major -le 4; then HIGH_OPT_CXXFLAGS="-O3" DEBUG_OPT_CXXFLAGS= - ;; - g++-[56].*) + else HIGH_OPT_CXXFLAGS="-O3" DEBUG_OPT_CXXFLAGS="-Og" - ;; - *) - HIGH_OPT_CXXFLAGS="-O" - DEBUG_OPT_CXXFLAGS= - ;; - esac + fi NO_OPT_CXXFLAGS="-O0" - # Flags are set - cxx_flags_set=yes - ;; -esac - -# Version-specific g++ flags -# -# Please follow the pattern below by adding new versions at the top, copying -# the information from the previous version and adding modifications to that. -case "$cxx_vendor-$cxx_version" in - -# Closer to the g++ 5.2 release, we should check for additional flags to -# include and break it out into it's own section, like the other versions -# below. -QAK - g++-[56]*) - - # Append warning flags from gcc-3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - - # Append more extra warning flags that only gcc 4.9+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdate-time -Wopenmp-simd" - - # (There was no release of gcc 5.0) - - # Append more extra warning flags that only gcc 5.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Warray-bounds=2" - ;; - - g++-4.9*) - # Append warning flags - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc 3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc 3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - - # Append more extra warning flags that only gcc 4.9+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdate-time -Wopenmp-simd" - ;; - - g++-4.8*) - # Append warning flags - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - ;; - - g++-4.7*) - # Append warning flags - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" + ############ + # Warnings # + ############ - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" +# First load the C warnings then add CXX warnings (if needed) - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" + ########### + # General # + ########### - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" + # Add various general warning flags in gnu-warnings for gcc versions 4.8 and later. + if test $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8 -o $cxx_vers_major -ge 5; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-general)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments cxx-error-general)" - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" + ###################### + # Developer warnings # + ###################### - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" + NO_DEVELOPER_WARNING_CXXFLAGS=$(load_gnu_arguments no-developer-general) + DEVELOPER_WARNING_CXXFLAGS=$(load_gnu_arguments developer-general) - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - ;; - - g++-4.6*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ knows about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-aliasing -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - ;; - - g++-4.5*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc4.0+ knows about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-aliasing -Wstrict-overflow=5" - ;; - - g++-4.4*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - ;; - - g++-4.3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wvla" - ;; - - g++-4.2*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - ;; - - g++-4.1.*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - ;; + fi - g++-4.0*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" + ####################### + # gcc 4 special cases # + ####################### - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" + # GCC 4.8 through the end of GCC 4 series + if test $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.8-4.last)" + fi - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" + ############################# + # Version-specific warnings # + ############################# - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" + # gcc >= 4.8 + if test $cxx_vers_major -ge 5 -o $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.8)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-4.8)" + NO_DEVELOPER_WARNING_CXXFLAGS="$NO_DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments no-developer-4.8)" + fi - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" + # gcc >= 4.9 + if test $cxx_vers_major -ge 5 -o $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 9; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.9)" + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-4.9)" + fi - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" + # gcc >= 5 + if test $cxx_vers_major -ge 5; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-5)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments cxx-error-5)" + fi - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" + # gcc >= 6 + if test $cxx_vers_major -ge 6; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 6)" + fi - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - ;; + # gcc >= 7 + if test $cxx_vers_major -ge 7; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 7)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-7)" + fi - g++-3.4*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" + # gcc 8 + if test $cxx_vers_major -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 8)" + #H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments error-8)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-8)" + NO_DEVELOPER_WARNING_CXXFLAGS="$NO_DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments no-developer-8)" + fi - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" + # gcc 9 + if test $cxx_vers_major -ge 9; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 9)" + fi - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append more extra warning flags that only gcc3.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - ;; - - g++-3.3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append more extra warning flags that only gcc3.3+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - ;; - - g++-3.2*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append more extra warning flags that only gcc3.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - ;; - - g++-3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append some extra warning flags that only gcc3+ know about - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - ;; -esac + ################# + # Flags are set # + ################# + cxx_flags_set=yes +fi # Clear cxx info if no flags set if test "X$cxx_flags_set" = "X"; then diff --git a/config/gnu-fflags b/config/gnu-fflags index 6b5e6a1..105a990 100644 --- a/config/gnu-fflags +++ b/config/gnu-fflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not GNU; otherwise `f9x_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for GNU fortran # gfortran unless a compiler version is already known # @@ -25,9 +39,8 @@ # if test X = "X$f9x_flags_set"; then f9x_version="`$FC $FCFLAGS $H5_FCFLAGS -v 2>&1 |grep 'gcc version' |\ - sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" + sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" if test X != "X$f9x_version"; then -# is_mpi="`$FC $FCFLAGS $H5_FCFLAGS -help 2>&1 |grep 'link MPI'`" f9x_vendor=`echo $f9x_version |sed 's/\([a-z]*\).*/\1/'` f9x_version=`echo $f9x_version |sed 's/[-a-z]//g'` if test X = "X$f9x_vendor" -a X != "X$f9x_version"; then @@ -37,24 +50,36 @@ if test X = "X$f9x_flags_set"; then echo "compiler '$FC' is GNU $f9x_vendor-$f9x_version" fi - # Some version numbers + # Get the compiler version numbers f9x_vers_major=`echo $f9x_version | cut -f1 -d.` f9x_vers_minor=`echo $f9x_version | cut -f2 -d.` f9x_vers_patch=`echo $f9x_version | cut -f3 -d.` test -n "$f9x_vers_major" || f9x_vers_major=0 test -n "$f9x_vers_minor" || f9x_vers_minor=0 test -n "$f9x_vers_patch" || f9x_vers_patch=0 - f9x_vers_all=`expr $f9x_vers_major '*' 1000000 + $f9x_vers_minor '*' 1000 + $f9x_vers_patch` fi fi -# Common GNU flags for various situations if test "X-gfortran" = "X-$f9x_vendor"; then - # Insert section about version specific problems from gnu-flags here, if - # necessary. + + FC_BASENAME=gfortran + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + + # Need Fortran 2008 support for storage_size() in gcc 4.6 on + # (2008ts in some versions) + if test $f9x_vers_major -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS -std=f2008" + elif test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 6; then + H5_FCFLAGS="$H5_FCFLAGS -std=f2008ts" + fi + + + ############################### + # Architecture-specific flags # + ############################### arch= - # Architecture-specific flags # Nothing currently. (Uncomment code below and modify to add any) #case "$host_os-$host_cpu" in # *-i686) @@ -62,43 +87,93 @@ if test "X-gfortran" = "X-$f9x_vendor"; then # ;; #esac - # Host-specific flags - # Nothing currently. (Uncomment code below and modify to add any) - #case "`hostname`" in - # sleipnir.ncsa.uiuc.edu) - # arch="$arch -pipe" - # ;; - #esac - - # General - FC_BASENAME=gfortran - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -pedantic -Wall -Wextra -Wunderflow -Wimplicit-interface -Wsurprising" + H5_FCFLAGS="$H5_FCFLAGS $arch" - # Turn off warnings for passing non-ANSI types to BIND(). - # We pass a lot of hid_t, etc. types so this generates a LOT of spurious warnings. - H5_FCFLAGS="$H5_FCFLAGS -Wno-c-binding-type" + ############## + # Production # + ############## - # Production PROD_FCFLAGS= - # Debug - DEBUG_FCFLAGS="-fbounds-check" + ######### + # Debug # + ######### + + if test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 5; then + DEBUG_FCFLAGS="-fcheck=all" + else + DEBUG_FCFLAGS="-fbounds-check" + fi + + ########### + # Symbols # + ########### - # Symbols - SYMBOLS_FCFLAGS="-g" NO_SYMBOLS_FCFLAGS="-s" + SYMBOLS_FCFLAGS="-g" + + ############# + # Profiling # + ############# - # Profiling PROFILE_FCFLAGS="-pg" - # Optimization - HIGH_OPT_FCFLAGS="-O2" - DEBUG_OPT_FCFLAGS="-O0" + ################ + # Optimization # + ################ + + if test $f9x_vers_major -le 4; then + HIGH_OPT_FCFLAGS="-O3" + DEBUG_OPT_FCFLAGS= + else + HIGH_OPT_FCFLAGS="-O3" + DEBUG_OPT_FCFLAGS="-Og" + fi NO_OPT_FCFLAGS="-O0" - # Flags are set + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-general)" + + ############################# + # Version-specific warnings # + ############################# + + # gfortran >= 4.8 + if test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-4.8)" + fi + + # gfortran 4.9 (nothing new) + + # gfortran >= 5 + if test $f9x_vers_major -ge 5; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-5)" + fi + + # gfortran >= 6 + if test $f9x_vers_major -ge 6; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-6)" + fi + + # gfortran 7 (nothing new) + + # gfortran >= 8 + if test $f9x_vers_major -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-8)" + fi + + # gfortran 9 (nothing new) + + ################# + # Flags are set # + ################# f9x_flags_set=yes fi diff --git a/config/gnu-flags b/config/gnu-flags index 2f2e428..7cf90b8 100644 --- a/config/gnu-flags +++ b/config/gnu-flags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -14,16 +14,48 @@ # This file should be sourced into configure if the compiler is the # GNU gcc compiler or a derivative. It is careful not to do anything -# if the compiler is not GNU; otherwise `cc_flags_set' is set to `yes' +# if the compiler is not GNU; otherwise 'cc_flags_set' is set to 'yes' # +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for gcc # unless a compiler version is already known # # cc_vendor: The compiler name: gcc # cc_version: Version number: 2.91.60, 2.7.2.1 # -if test X = "X$cc_flags_set"; then +if test "X-" = "X-$cc_flags_set"; then # PathScale compiler spits out gcc version string too. Need to # filter it out. # icc beginning with version 12 includes a "gcc version compatiblilty" @@ -32,31 +64,32 @@ if test X = "X$cc_flags_set"; then # containing 'icc version'. The cc_version for icc is correctly determined # and flags added in the intel-flags script. cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 | grep -v 'PathScale' |\ - grep -v 'icc version' |\ + grep -v '^icc.*version' |\ grep 'gcc version' | sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'` cc_version=`echo $cc_version |sed 's/[-a-z]//g'` if test X = "X$cc_vendor" -a X != "X$cc_version"; then - cc_vendor=gcc + cc_vendor=gcc fi if test "-" != "$cc_vendor-$cc_version"; then - echo "compiler '$CC' is GNU $cc_vendor-$cc_version" + echo "compiler '$CC' is GNU $cc_vendor-$cc_version" fi - # Some version numbers + # Get the compiler version numbers cc_vers_major=`echo $cc_version | cut -f1 -d.` cc_vers_minor=`echo $cc_version | cut -f2 -d.` cc_vers_patch=`echo $cc_version | cut -f3 -d.` test -n "$cc_vers_major" || cc_vers_major=0 test -n "$cc_vers_minor" || cc_vers_minor=0 test -n "$cc_vers_patch" || cc_vers_patch=0 - cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch` fi -# Common GCC flags for various situations -case "$cc_vendor-$cc_version" in - gcc*) - # Architecture-specific flags +if test "X-gcc" = "X-$cc_vendor"; then + + ############################### + # Architecture-specific flags # + ############################### + arch= case "$host_os-$host_cpu" in # FreeBSD sets the information from "uname -m" to the general machine @@ -84,377 +117,155 @@ case "$cc_vendor-$cc_version" in ;; esac - # Host-specific flags - case "`hostname`" in - sleipnir.ncsa.uiuc.edu) - arch="$arch -pipe" + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CFLAGS="$H5_CFLAGS -std=c99" ;; esac - # General flags - # - # Note that some of the flags listed here really should be developer - # flags (listed in a separate variable, below) but we put them here - # because they are not raised by the current code and we'd like to - # know if they do start showing up. - # - # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) - # warnings that are emitted. If you need it, add it from the - # environment variable at configure time. - H5_CFLAGS="$H5_CFLAGS $arch -std=c99 -pedantic -Wall -Wextra -Wbad-function-cast -Wc++-compat -Wcast-align" - H5_CFLAGS="$H5_CFLAGS -Wcast-qual -Wconversion -Wdeclaration-after-statement -Wdisabled-optimization -Wfloat-equal" - H5_CFLAGS="$H5_CFLAGS -Wformat=2 -Winit-self -Winvalid-pch -Wmissing-declarations -Wmissing-include-dirs" - H5_CFLAGS="$H5_CFLAGS -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpacked -Wpointer-arith" - H5_CFLAGS="$H5_CFLAGS -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum" - H5_CFLAGS="$H5_CFLAGS -Wundef -Wunused-macros -Wunsafe-loop-optimizations -Wwrite-strings" - - # Production + H5_CFLAGS="$H5_CFLAGS $arch" + + ############## + # Production # + ############## + # NDEBUG is handled explicitly by the configure script - case "$cc_vendor-$cc_version" in - gcc-4.*) + if test $cc_vers_major -le 4; then PROD_CFLAGS= - ;; - gcc-[56].*) + else PROD_CFLAGS="-fstdarg-opt" - ;; - *) - # gcc automatically inlines based on the optimization level - # this is just a failsafe - PROD_CFLAGS="-finline-functions" - ;; - esac + fi + + ######### + # Debug # + ######### - # Debug # NDEBUG is handled explicitly by the configure script # -g is handled by the symbols flags - case "$cc_vendor-$cc_version" in - gcc-[56].*) - DEBUG_CFLAGS="-ftrapv -fno-common" - ;; - *) + if test $cc_vers_major -le 4; then DEBUG_CFLAGS= - ;; - esac + else + DEBUG_CFLAGS="-ftrapv -fno-common" + fi - # Developer warnings (suggestions from gcc, not code problems) - DEVELOPER_WARNING_CFLAGS="-Winline -Waggregate-return -Wmissing-format-attribute -Wmissing-noreturn" - NO_DEVELOPER_WARNING_CFLAGS="-Wno-inline -Wno-aggregate-return -Wno-missing-format-attribute -Wno-missing-noreturn" + ########### + # Symbols # + ########### - # Symbols NO_SYMBOLS_CFLAGS="-s" SYMBOLS_CFLAGS="-g -fno-omit-frame-pointer" - # Profile + ############# + # Profiling # + ############# + PROFILE_CFLAGS="-pg" - # Optimization - case "$cc_vendor-$cc_version" in - gcc-4.*) + ################ + # Optimization # + ################ + + if test $cc_vers_major -le 4; then HIGH_OPT_CFLAGS="-O3" DEBUG_OPT_CFLAGS= - ;; - gcc-[56].*) + else HIGH_OPT_CFLAGS="-O3" DEBUG_OPT_CFLAGS="-Og" - ;; - *) - HIGH_OPT_CFLAGS="-O" - DEBUG_OPT_CFLAGS= - ;; - esac + fi NO_OPT_CFLAGS="-O0" - # Flags are set - cc_flags_set=yes - ;; -esac + ############ + # Warnings # + ############ -# Version specific GCC flags -# -# Please follow the pattern below by adding new versions at the top, copying -# the information from the previous version and adding modifications to that. -case "$cc_vendor-$cc_version" in - -# When the gcc 7.x release is out, we should check for additional flags to -# include and break it out into it's own section, like the other versions -# below. -QAK - gcc-6*) - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - - # Append warning flags that only gcc 4.7+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - - # Append warning flags that only gcc 4.8+ knows about - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=format" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=format" - - # Append warning flags that only gcc 4.9+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdate-time" - - # Append warning flags that only gcc 5.x+ knows about - H5_CFLAGS="$H5_CFLAGS -Warray-bounds=2 -Wc99-c11-compat" - - # Append warning flags that only gcc 6.x+ knows about - H5_CFLAGS="$H5_CFLAGS -Wnull-dereference -Wunused-const-variable -Wduplicated-cond -Whsa" - ;; - - gcc-5*) - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - - # Append warning flags that only gcc 4.7+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - - # Append warning flags that only gcc 4.8+ knows about - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=format" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=format" - - # Append warning flags that only gcc 4.9+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdate-time" - - # Append warning flags that only gcc 5.x+ knows about - H5_CFLAGS="$H5_CFLAGS -Warray-bounds=2 -Wc99-c11-compat" - ;; - - gcc-4.9*) - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - - # Append warning flags that only gcc 4.7+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - - # Append warning flags that only gcc 4.8+ knows about - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=format" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=format" - - # Append warning flags that only gcc 4.9+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdate-time" - ;; - - gcc-4.8*) - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - - # Append warning flags that only gcc 4.7+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - - # Append warning flags that only gcc 4.8+ knows about - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=format" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=format" - ;; - - gcc-4.7*) - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - - # Append warning flags that only gcc 4.7+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - ;; - - gcc-4.6*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-aliasing -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - - # Append warning flags that only gcc 4.6+ knows about - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - ;; - - gcc-4.5*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.2+ knows about - # (none, or incorporated in -Wall / -Wextra now) - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append warning flags that only gcc 4.5+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-aliasing -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - ;; - - gcc-4.4*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.2+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow" - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append warning flags that only gcc 4.4+ knows about - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - ;; - - gcc-4.3*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.1+ knows about - # -Wvolatile-register-var was later incorporated into -Wall and - # needs to be specified explicitly for gcc 4.1-4.3. - H5_CFLAGS="$H5_CFLAGS -Wvolatile-register-var" - - # Append warning flags that only gcc 4.2+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow" - - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wvla" - ;; - - gcc-4.2*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.1+ knows about - # -Wvolatile-register-var was later incorporated into -Wall and - # needs to be specified explicitly for gcc 4.1-4.3. - H5_CFLAGS="$H5_CFLAGS -Wvolatile-register-var" - - # Append warning flags that only gcc 4.2+ knows about - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow" - ;; - - gcc-4.1*) - # Disable warnings about using 'long long' type - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - - # Append warning flags that only gcc 4.1+ knows about - # -Wvolatile-register-var was later incorporated into -Wall and - # needs to be specified explicitly for gcc 4.1-4.3. - H5_CFLAGS="$H5_CFLAGS -Wvolatile-register-var" - ;; + ########### + # General # + ########### + + # Add various general warning flags in gnu-warnings for gcc versions 4.8 and later. + if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8 -o $cc_vers_major -gt 4; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments general)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CFLAGS=$(load_gnu_arguments no-developer-general) + DEVELOPER_WARNING_CFLAGS=$(load_gnu_arguments developer-general) + + fi + + ####################### + # gcc 4 special cases # + ####################### + + # GCC 4.8 through the end of GCC 4 series + if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.8-4.last)" + fi + + ############################# + # Version-specific warnings # + ############################# + + # gcc >= 4.8 + if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.8)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-4.8)" + NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments no-developer-4.8)" + fi + + # gcc >= 4.9 + if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 9; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.9)" + fi + + # gcc >= 5 + if test $cc_vers_major -ge 5; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 5)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-5)" + fi + + # gcc >= 6 + if test $cc_vers_major -ge 6; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 6)" + fi + + # gcc >= 7 + if test $cc_vers_major -ge 7; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 7)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-7)" + fi -esac + # gcc 8 + if test $cc_vers_major -ge 8; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 8)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-8)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-8)" + NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments no-developer-8)" + fi + + # gcc 9 + if test $cc_vers_major -ge 9; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 9)" + fi + + ################# + # Flags are set # + ################# + cc_flags_set=yes +fi # Clear cc info if no flags set if test "X$cc_flags_set" = "X"; then - cc_vendor= - cc_version= + cc_vendor= + cc_version= fi + diff --git a/config/gnu-warnings/4.8 b/config/gnu-warnings/4.8 new file mode 100644 index 0000000..c7e3dd1 --- /dev/null +++ b/config/gnu-warnings/4.8 @@ -0,0 +1,25 @@ +# warning flags added for GCC >= 4.3 +-Wlarger-than=2560 +-Wlogical-op + +# warning flags added for GCC >= 4.4 +-Wframe-larger-than=16384 +-Wpacked-bitfield-compat +-Wsync-nand + +# warning flag added for GCC >= 4.5 +-Wstrict-overflow=5 + +# warning flags added for GCC >= 4.6 +-Wdouble-promotion +-Wtrampolines + +# warning flag added for GCC >= 4.7 +# +# -Wstack-usage=8192 warnings need to be swept up on a branch so +# that we can stop burdening the whole development team. +# +-Wstack-usage=8192 + +# warning flag added for GCC >= 4.8 +-Wmaybe-uninitialized diff --git a/config/gnu-warnings/4.8-4.last b/config/gnu-warnings/4.8-4.last new file mode 100644 index 0000000..2db90fb --- /dev/null +++ b/config/gnu-warnings/4.8-4.last @@ -0,0 +1,3 @@ +# -Wvla was later incorporated into -Wpedantic and +# only needs to be specified explicitly for gcc 4 +-Wvla diff --git a/config/gnu-warnings/4.9 b/config/gnu-warnings/4.9 new file mode 100644 index 0000000..78aa929 --- /dev/null +++ b/config/gnu-warnings/4.9 @@ -0,0 +1 @@ +-Wdate-time diff --git a/config/gnu-warnings/5 b/config/gnu-warnings/5 new file mode 100644 index 0000000..32cb196 --- /dev/null +++ b/config/gnu-warnings/5 @@ -0,0 +1,2 @@ +-Warray-bounds=2 +-Wc99-c11-compat diff --git a/config/gnu-warnings/6 b/config/gnu-warnings/6 new file mode 100644 index 0000000..736a446 --- /dev/null +++ b/config/gnu-warnings/6 @@ -0,0 +1,9 @@ +# +# Careful! -Wduplicated-cond, combined with HDF5's heavy use of +# macros, can make a lot of noise. +# +-Wduplicated-cond +-Whsa +-Wnormalized +-Wnull-dereference +-Wunused-const-variable diff --git a/config/gnu-warnings/7 b/config/gnu-warnings/7 new file mode 100644 index 0000000..266f5c1 --- /dev/null +++ b/config/gnu-warnings/7 @@ -0,0 +1,7 @@ +-Walloca +-Walloc-zero +-Wduplicated-branches +-Wformat-overflow=2 +-Wformat-truncation=1 +-Wimplicit-fallthrough=5 +-Wrestrict diff --git a/config/gnu-warnings/8 b/config/gnu-warnings/8 new file mode 100644 index 0000000..5e7519d --- /dev/null +++ b/config/gnu-warnings/8 @@ -0,0 +1,3 @@ +-Wattribute-alias +-Wcast-align=strict +-Wshift-overflow=2 diff --git a/config/gnu-warnings/9 b/config/gnu-warnings/9 new file mode 100644 index 0000000..c084350 --- /dev/null +++ b/config/gnu-warnings/9 @@ -0,0 +1,2 @@ +-Wattribute-alias=2 +-Wmissing-profile diff --git a/config/gnu-warnings/cxx-4.9 b/config/gnu-warnings/cxx-4.9 new file mode 100644 index 0000000..046d6db --- /dev/null +++ b/config/gnu-warnings/cxx-4.9 @@ -0,0 +1 @@ +-Wopenmp-simd diff --git a/config/gnu-warnings/cxx-5 b/config/gnu-warnings/cxx-5 new file mode 100644 index 0000000..723e448 --- /dev/null +++ b/config/gnu-warnings/cxx-5 @@ -0,0 +1 @@ +-Warray-bounds=2 diff --git a/config/gnu-warnings/cxx-error-5 b/config/gnu-warnings/cxx-error-5 new file mode 100644 index 0000000..8cc8c9d --- /dev/null +++ b/config/gnu-warnings/cxx-error-5 @@ -0,0 +1,11 @@ +# +# In GCC 4.4.7, the compiler gripes about shadowed global +# declarations when a local variable uses the name of a +# function that's in a system header file. For some reason, +# later versions of GCC (e.g., 5.2.0) don't complain about +# the shadowed globals. Maybe later versions are less fussy? +# Anyway, the shadowing seems to be harmless, and GCC 4.4.7 +# is not a supported compiler, so let us promote shadowed globals +# warnings to errors only for GCC 5 and later. +# +-Werror=shadow diff --git a/config/gnu-warnings/cxx-error-general b/config/gnu-warnings/cxx-error-general new file mode 100644 index 0000000..85cd9a3 --- /dev/null +++ b/config/gnu-warnings/cxx-error-general @@ -0,0 +1,32 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/tcompound.cpp +# -Werror=cast-align +-Wcast-align +# NOTE: c++/src files are not compatible with these warnings as errors +# c++/src/H5Object.cpp +# -Werror=missing-declarations +-Wmissing-declarations +-Werror=packed +-Werror=redundant-decls +-Werror=switch +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/tattr.cpp +# -Werror=unused-but-set-variable +-Wunused-but-set-variable +-Werror=unused-function +-Werror=unused-variable +# NOTE: c++/src files are not compatible with these warnings as errors +# c++/src/H5Object.cpp,c++/src/H5StrType.cpp,c++/src/H5PredType.cpp +# -Werror=unused-parameter +-Wunused-parameter +# +# Other files not compatible +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/titerate.cpp,c++/test/tarray.cpp +# -Werror=missing-declarations +# c++/test/titerate.cpp,c++/test/tarray.cpp,c++/test/tlinks.cpp,c++/test/ttypes.cpp,c++/test/dsets.cpp +# -Werror=unused-parameter diff --git a/config/gnu-warnings/cxx-general b/config/gnu-warnings/cxx-general new file mode 100644 index 0000000..9548cc0 --- /dev/null +++ b/config/gnu-warnings/cxx-general @@ -0,0 +1,31 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +# +# NOTE: Don't add -Wpadded here since we can't/won't fix the (many) +# warnings that are emitted. If you need it, add it from the +# environment variable at configure time. +-Wall +-Wcast-qual +-Wconversion +-Wctor-dtor-privacy +-Weffc++ +-Wextra +-Wfloat-equal +-Wformat=2 +-Winit-self +-Winvalid-pch +-Wmissing-include-dirs +-Wno-format-nonliteral +-Wnon-virtual-dtor +-Wold-style-cast +-Woverloaded-virtual +-Wreorder +-Wshadow +-Wsign-promo +##-Wunreachable-code +-Wundef +##-Wvariadic-macros +-Wwrite-strings +-pedantic diff --git a/config/gnu-warnings/developer-4.8 b/config/gnu-warnings/developer-4.8 new file mode 100644 index 0000000..fd76f6c --- /dev/null +++ b/config/gnu-warnings/developer-4.8 @@ -0,0 +1,23 @@ +# developer warning flags added for GCC >= 4.5 +# +# -Wjump-misses-init makes lots of noise for a questionable benefit. +# Can jumping over an initialization in C cause any harm, if +# the variable is never *used* before it has been initialized? +# +-Wjump-misses-init +-Wunsuffixed-float-constants + +# developer warning flag added for GCC >= 4.6 +-Wsuggest-attribute=const + +# developer warning flags added for GCC >= 4.7 +-Wsuggest-attribute=noreturn +-Wsuggest-attribute=pure +# +# It's not clear that -Wvector-operation-performance warnings are +# actionable, so they are demoted to "developer" warnings. +# +-Wvector-operation-performance + +# developer warning flag added for GCC >= 4.8 +-Wsuggest-attribute=format diff --git a/config/gnu-warnings/developer-7 b/config/gnu-warnings/developer-7 new file mode 100644 index 0000000..2a3ce7e --- /dev/null +++ b/config/gnu-warnings/developer-7 @@ -0,0 +1 @@ +-Wstringop-overflow=2 diff --git a/config/gnu-warnings/developer-8 b/config/gnu-warnings/developer-8 new file mode 100644 index 0000000..a2ba7ca --- /dev/null +++ b/config/gnu-warnings/developer-8 @@ -0,0 +1,3 @@ +-Wstringop-overflow=4 +-Wsuggest-attribute=cold +-Wsuggest-attribute=malloc diff --git a/config/gnu-warnings/developer-general b/config/gnu-warnings/developer-general new file mode 100644 index 0000000..b34c4b7 --- /dev/null +++ b/config/gnu-warnings/developer-general @@ -0,0 +1,13 @@ +# (suggestions from gcc, not code problems) +# NOTE: -Wformat-nonliteral added back in here (from being disabled in +# H5_CFLAGS) +-Waggregate-return +-Wdisabled-optimization +-Wformat-nonliteral +-Winline +-Wmissing-format-attribute +-Wmissing-noreturn +-Wswitch-default +-Wswitch-enum +-Wunsafe-loop-optimizations +-Wunused-macros diff --git a/config/gnu-warnings/error-5 b/config/gnu-warnings/error-5 new file mode 100644 index 0000000..f7e1138 --- /dev/null +++ b/config/gnu-warnings/error-5 @@ -0,0 +1,12 @@ +-Werror=incompatible-pointer-types +# +# In GCC 4.4.7, the compiler gripes about shadowed global +# declarations when a local variable uses the name of a +# function that's in a system header file. For some reason, +# later versions of GCC (e.g., 5.2.0) don't complain about +# the shadowed globals. Maybe later versions are less fussy? +# Anyway, the shadowing seems to be harmless, and GCC 4.4.7 +# is not a supported compiler, so let us promote shadowed globals +# warnings to errors only for GCC 5 and later. +# +-Werror=shadow diff --git a/config/gnu-warnings/error-8 b/config/gnu-warnings/error-8 new file mode 100644 index 0000000..2f54a4d --- /dev/null +++ b/config/gnu-warnings/error-8 @@ -0,0 +1,25 @@ +# NOTE: src/ files are not compatible with these warnings as errors +# src/H5Dchunk.c +# -Werror=cast-function-type +-Wcast-function-type +# +# For GCC 8, promote maybe-initialized warnings to an error. GCC 8 +# reports 0 maybe-uninitialized warnings where earlier versions +# make many false reports. GCC 8 seems to analyze calls to static +# in order to detect initializations that occur there. It's possible +# that GCC 8 only performs that analysis at -O3, though. +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDlog.c, +# -Werror=maybe-uninitialized +-Wmaybe-uninitialized +# NOTE: src/ files are not compatible with these warnings as errors +# src/H5Shyper.c,src/H5SL.c,src/H5Shyper.c +# -Werror=maybe-uninitialized +# NOTE: Test files are not compatible with these warnings as errors +# test/cache_common.c, +# -Werror=maybe-uninitialized +# NOTE: hl/src/ files are not compatible with these warnings as errors +# hl/src/H5DS.c, +# -Werror=maybe-uninitialized diff --git a/config/gnu-warnings/error-general b/config/gnu-warnings/error-general new file mode 100644 index 0000000..f0e61f8 --- /dev/null +++ b/config/gnu-warnings/error-general @@ -0,0 +1,91 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +-Werror=bad-function-cast +-Werror=declaration-after-statement +-Werror=implicit-function-declaration +-Werror=missing-declarations +-Werror=missing-prototypes +-Werror=nested-externs +-Werror=old-style-definition +-Werror=packed +-Werror=pointer-sign +-Werror=pointer-to-int-cast +-Werror=redundant-decls +-Werror=strict-prototypes +-Werror=switch +# +#-Werror=discarded-qualifiers +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDdirect.c,H5FDmpio.c,H5FDros3.c, +# -Werror=unused-function +# +-Wunused-function +# +# H5FDdrvr_module.h +# -Werror=unused-variable +# +-Wunused-variable +# +# H5VLpassthru.c +# -Werror=unused-parameter +# +-Wunused-parameter +# +# +# +# NOTE: Tools files are not compatible with these warnings as errors +# lib/h5tools.c +# -Werror=cast-align +# +-Wcast-align +# +# lib/h5diff_array.c +# -Werror=unused-but-set-variable +# +-Wunused-but-set-variable +# +# lib/h5tools_utils.c +# -Werror=unused-parameter +# +# +# NOTE: JNI files are not compatible with these warnings as errors +# jni/h5pDCPLImp.c,jni/nativeData.c,jni/h5util.c,jni/h5rImp.c +# jni/h5sImp.c,jni/h5tImp.c +# -Werror=cast-align +# jni/h5util.c +# -Werror=format(-overflow) +# +-Wformat +# +# +#Examples and tests do not use the same set of extensive warning flags as libraries +# Here is a list of tests and examples that have issues with the stricter warnings as error +# +# NOTE: Test files are not compatible with these warnings as errors +# thread_id.c, +# -Werror=unused-function +# dsets.c +# -Werror=unused-parameter +# external.c,perform/sio_engine.c +# -Werror=format(-truncation) +# +# +# NOTE: Examples files are not compatible with these warnings as errors +# h5_vds-eiger.c,h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c,h5_vds-percival-unlim-maxmin.c +# h5_vds-percival.c,h5_read.c,h5_rdwt.c,h5_mount.c,h5_extend.c,h5_extend_write.c +# h5_write.c,h5_vds-simpleIO.c,h5_ref2reg_deprec.c,h5_crtgrp.c,h5_select.c +# h5_vds-percival-unlim.c,h5_crtatt.c,h5_group.c,h5_attribute.c,h5_crtdat.c +# h5_reference_deprec.c +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=strict-prototypes +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=old-style-definition +# h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c, +# -Werror=unused-variable +# h5_elink_unix2win.c,h5_extlink.c,h5_attribute.c +# -Werror=unused-parameter + diff --git a/config/gnu-warnings/general b/config/gnu-warnings/general new file mode 100644 index 0000000..a7a20b7 --- /dev/null +++ b/config/gnu-warnings/general @@ -0,0 +1,32 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +# +# NOTE: Don't add -Wpadded here since we can't/won't fix the (many) +# warnings that are emitted. If you need it, add it from the +# environment variable at configure time. +-Wall +-Wcast-qual +-Wconversion +-Wextra +-Wfloat-equal +-Wformat=2 +-Winit-self +-Winvalid-pch +-Wmissing-include-dirs +# +# NOTE: Due to the divergence in the C and C++, we're dropping support for +# compiling the C library with a C++ compiler and dropping the -Wc++-compat +# warning. +# +-Wno-c++-compat +# +# NOTE: Disable the -Wformat-nonliteral from -Wformat=2 here and re-add +# it to the developer flags. +# +-Wno-format-nonliteral +-Wshadow +-Wundef +-Wwrite-strings +-pedantic diff --git a/config/gnu-warnings/gfort-4.8 b/config/gnu-warnings/gfort-4.8 new file mode 100644 index 0000000..9d880de --- /dev/null +++ b/config/gnu-warnings/gfort-4.8 @@ -0,0 +1,17 @@ +# warning flags added for gfortran >= 4.4 +-Warray-temporaries +-Wintrinsics-std + +# warning flag added for gfortran >= 4.5 +-Wimplicit-procedure + +# warning flags added for gfortran >= 4.7 +-Wreal-q-constant +-Wfunction-elimination + +# warning flags added for gfortran >= 4.8 +-Wrealloc-lhs +-Wrealloc-lhs-all +# Turn off warnings for passing non-ANSI types to BIND(). +# We pass a lot of hid_t, etc. types so this generates a LOT of spurious warnings. +-Wno-c-binding-type diff --git a/config/gnu-warnings/gfort-5 b/config/gnu-warnings/gfort-5 new file mode 100644 index 0000000..c5d3850 --- /dev/null +++ b/config/gnu-warnings/gfort-5 @@ -0,0 +1 @@ +-Wuse-without-only diff --git a/config/gnu-warnings/gfort-6 b/config/gnu-warnings/gfort-6 new file mode 100644 index 0000000..f70466c --- /dev/null +++ b/config/gnu-warnings/gfort-6 @@ -0,0 +1 @@ +-Winteger-division diff --git a/config/gnu-warnings/gfort-8 b/config/gnu-warnings/gfort-8 new file mode 100644 index 0000000..5097365 --- /dev/null +++ b/config/gnu-warnings/gfort-8 @@ -0,0 +1 @@ +-Wfrontend-loop-interchange diff --git a/config/gnu-warnings/gfort-general b/config/gnu-warnings/gfort-general new file mode 100644 index 0000000..4028316 --- /dev/null +++ b/config/gnu-warnings/gfort-general @@ -0,0 +1,12 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +-Waliasing +-Wall +-Wcharacter-truncation +-Wextra +-Wimplicit-interface +-Wsurprising +-Wunderflow +-pedantic diff --git a/config/gnu-warnings/no-developer-4.8 b/config/gnu-warnings/no-developer-4.8 new file mode 100644 index 0000000..1e29c78 --- /dev/null +++ b/config/gnu-warnings/no-developer-4.8 @@ -0,0 +1,13 @@ +# no-developer warning flag added for GCC >= 4.5 +-Wno-jump-misses-init +-Wno-unsuffixed-float-constants + +# no-developer warning flag added for GCC >= 4.6 +-Wno-suggest-attribute=const + +# no-developer warning flags added for GCC >= 4.7 +-Wno-suggest-attribute=noreturn +-Wno-suggest-attribute=pure + +# no-developer warning flag added for GCC >= 4.8 +-Wno-suggest-attribute=format diff --git a/config/gnu-warnings/no-developer-8 b/config/gnu-warnings/no-developer-8 new file mode 100644 index 0000000..2134bad --- /dev/null +++ b/config/gnu-warnings/no-developer-8 @@ -0,0 +1,2 @@ +-Wno-suggest-attribute=cold +-Wno-suggest-attribute=malloc diff --git a/config/gnu-warnings/no-developer-general b/config/gnu-warnings/no-developer-general new file mode 100644 index 0000000..18831dd --- /dev/null +++ b/config/gnu-warnings/no-developer-general @@ -0,0 +1,8 @@ +-Wno-aggregate-return +-Wno-inline +-Wno-missing-format-attribute +-Wno-missing-noreturn +# NOTE: -pedantic includes -Woverlength-strings which triggers a warning +# regarding the library settings string (H5libhdf5_settings). We'll turn +# it off here but leave it on in the developer flags. +-Wno-overlength-strings diff --git a/config/intel-fflags b/config/intel-fflags index 8b1110e..ed7ee52 100644 --- a/config/intel-fflags +++ b/config/intel-fflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not Intel; otherwise `f9x_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/intel-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_intel_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/intel-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for ifort # ifort unless a compiler version is already known # @@ -44,8 +58,8 @@ fi # Common Intel flags for various situations if test "X-ifort" = "X-$f9x_vendor"; then - # Insert section about version specific problems from gnu-flags here, if - # necessary. + # Insert section about version specific problems from compiler flags here, + # if necessary. arch= # Architecture-specific flags @@ -68,7 +82,8 @@ if test "X-ifort" = "X-$f9x_vendor"; then FC_BASENAME=ifort F9XSUFFIXFLAG="" FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS" + H5_FCFLAGS="$H5_FCFLAGS -stand:f03 -free" + H5_FCFLAGS="$H5_FCFLAGS $(load_intel_arguments ifort-general)" # Production PROD_FCFLAGS= @@ -89,7 +104,9 @@ if test "X-ifort" = "X-$f9x_vendor"; then DEBUG_OPT_FCFLAGS= NO_OPT_FCFLAGS= - # Flags are set + ################# + # Flags are set # + ################# f9x_flags_set=yes fi diff --git a/config/intel-flags b/config/intel-flags index dad210c..100e68a 100644 --- a/config/intel-flags +++ b/config/intel-flags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not Intel; otherwise `cc_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/intel-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_intel_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/intel-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for icc # icc unless a compiler version is already known # @@ -66,7 +80,7 @@ if test "X-icc" = "X-$cc_vendor"; then # General # Default to C99 standard. - H5_CFLAGS="$H5_CFLAGS $arch -std=c99 -Wcheck -Wall" + H5_CFLAGS="$H5_CFLAGS $arch -std=c99" # Production PROD_CFLAGS= @@ -88,16 +102,20 @@ if test "X-icc" = "X-$cc_vendor"; then DEBUG_OPT_CFLAGS="-O0" NO_OPT_CFLAGS="-O0" - # Flags are set - cc_flags_set=yes + ############ + # Warnings # + ############ -fi + ########### + # General # + ########### + + H5_CFLAGS="$H5_CFLAGS $(load_intel_arguments general)" + + ############################# + # Version-specific warnings # + ############################# -# Version specific ICC flags -# -# Please follow the pattern below by adding new versions at the top, copying -# the information from the previous version and adding modifications to that. -# The default at the bottom will apply if no earlier version matches. case "$cc_vendor-$cc_version" in icc-1[5-6]*) H5_CFLAGS="$H5_CFLAGS -Wcomment -Wdeprecated -Wextra-tokens -Wformat -Wformat-security -Wmain -Wmissing-declarations -Wmissing-prototypes -Wp64 -Wpointer-arith -Wreturn-type -Wshadow -Wstrict-prototypes -Wtrigraphs -Wuninitialized -Wunknown-pragmas -Wunused-function -Wunused-variable -Wwrite-strings" @@ -113,6 +131,13 @@ case "$cc_vendor-$cc_version" in ;; esac + ################# + # Flags are set # + ################# + cc_flags_set=yes + +fi + # Clear cc info if no flags set if test "X-$cc_flags_set" = "X-"; then cc_vendor= diff --git a/config/intel-warnings/general b/config/intel-warnings/general new file mode 100644 index 0000000..d0b2e25 --- /dev/null +++ b/config/intel-warnings/general @@ -0,0 +1,2 @@ +-Wall +-Wcheck
\ No newline at end of file diff --git a/config/intel-warnings/ifort-general b/config/intel-warnings/ifort-general new file mode 100644 index 0000000..a9da0e5 --- /dev/null +++ b/config/intel-warnings/ifort-general @@ -0,0 +1 @@ +-warn:all diff --git a/config/linux-gnueabihf b/config/linux-gnueabihf new file mode 100644 index 0000000..326edeb --- /dev/null +++ b/config/linux-gnueabihf @@ -0,0 +1,16 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + +# ARM for Raspberry Pi, etc. +# This is the same as linux-gnulibc1 + +. $srcdir/config/linux-gnulibc1 diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1 index 39225e7..a6f81ff 100644 --- a/config/linux-gnulibc1 +++ b/config/linux-gnulibc1 @@ -42,6 +42,9 @@ fi # Figure out Intel C compiler flags . $srcdir/config/intel-flags +# Figure out Clang C compiler flags +. $srcdir/config/clang-flags + # Use default Fortran 90 compiler according to what C compiler is used. if test "X-" = "X-$FC"; then case $CC_BASENAME in @@ -61,6 +64,11 @@ if test "X-" = "X-$FC"; then FC=mpif90 FC_BASENAME=mpif90 ;; + clang*) + # clang has no fortran compiler. Use gfortran. + FC=gfortran + FC_BASENAME=gfortran + ;; esac else case $FC in @@ -194,6 +202,9 @@ fi # Figure out GNU CXX compiler flags . $srcdir/config/gnu-cxxflags +# Figure out Clang CXX compiler flags +. $srcdir/config/clang-cxxflags + # compiler version strings # check if the compiler_version_info is already set @@ -223,6 +234,11 @@ case $CC in sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'` ;; + *clang*) + cc_version_info="`$CC $CFLAGS $H5_CFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cc_version_info for $CC" ;; @@ -317,6 +333,11 @@ case $CXX in cxx_version_info=`echo $cxx_version_info` ;; + *clang++*) + cxx_version_info="`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cxx_version_info for $CXX" ;; diff --git a/config/netbsd b/config/netbsd new file mode 100644 index 0000000..9a9348b --- /dev/null +++ b/config/netbsd @@ -0,0 +1,56 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file is part of the HDF5 build script. It is processed shortly +# after configure starts and defines, among other things, flags for +# the various compile modes. +# +# See BlankForm in this directory for details. + +# The default compiler is `gcc' +if test "X-" = "X-$CC"; then + CC=gcc + CC_BASENAME=gcc +fi + +# Figure out C compiler flags +. $srcdir/config/gnu-flags + +# Figure out Intel C compiler flags +. $srcdir/config/intel-flags + +# The default Fortran 90 compiler +if test "X-" = "X-$FC"; then + case $CC_BASENAME in + gcc*|pgcc*) + FC=gfortran + FC_BASENAME=gfortran + ;; + icc*) + FC=ifort + FC_BASENAME=ifort + ;; + mpicc*) + FC=mpif90 + FC_BASENAME=mpif90 + ;; + esac +fi + +# Figure out FORTRAN compiler flags +. $srcdir/config/gnu-fflags + +# Figure out Intel F90 compiler flags +. $srcdir/config/intel-fflags + diff --git a/config/sanitizer/LICENSE b/config/sanitizer/LICENSE new file mode 100644 index 0000000..895657b --- /dev/null +++ b/config/sanitizer/LICENSE @@ -0,0 +1,174 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability.
\ No newline at end of file diff --git a/config/sanitizer/README.md b/config/sanitizer/README.md new file mode 100644 index 0000000..0d5fb6c --- /dev/null +++ b/config/sanitizer/README.md @@ -0,0 +1,307 @@ +# CMake Scripts <!-- omit in toc --> + +[](https://git.stabletec.com/other/cmake-scripts/commits/master) +[](https://git.stabletec.com/other/cmake-scripts/blob/master/LICENSE) + +This is a collection of quite useful scripts that expand the possibilities for building software with CMake, by making some things easier and otherwise adding new build types + +- [C++ Standards `c++-standards.cmake`](#c-standards-c-standardscmake) +- [Sanitizer Builds `sanitizers.cmake`](#sanitizer-builds-sanitizerscmake) +- [Code Coverage `code-coverage.cmake`](#code-coverage-code-coveragecmake) + - [Added Targets](#added-targets) + - [Usage](#usage) + - [Example 1 - All targets instrumented](#example-1---all-targets-instrumented) + - [1a - Via global command](#1a---via-global-command) + - [1b - Via target commands](#1b---via-target-commands) + - [Example 2: Target instrumented, but with regex pattern of files to be excluded from report](#example-2-target-instrumented-but-with-regex-pattern-of-files-to-be-excluded-from-report) + - [Example 3: Target added to the 'ccov' and 'ccov-all' targets](#example-3-target-added-to-the-ccov-and-ccov-all-targets) +- [Compiler Options `compiler-options.cmake`](#compiler-options-compiler-optionscmake) +- [Dependency Graph `dependency-graph.cmake`](#dependency-graph-dependency-graphcmake) + - [Required Arguments](#required-arguments) + - [OUTPUT_TYPE *STR*](#output_type-str) + - [Optional Arguments](#optional-arguments) + - [ADD_TO_DEP_GRAPH](#add_to_dep_graph) + - [TARGET_NAME *STR*](#target_name-str) + - [OUTPUT_DIR *STR*](#output_dir-str) +- [Doxygen `doxygen.cmake`](#doxygen-doxygencmake) + - [Optional Arguments](#optional-arguments-1) + - [ADD_TO_DOC](#add_to_doc) + - [INSTALLABLE](#installable) + - [PROCESS_DOXYFILE](#process_doxyfile) + - [TARGET_NAME *STR*](#target_name-str-1) + - [OUTPUT_DIR *STR*](#output_dir-str-1) + - [INSTALL_PATH *STR*](#install_path-str) + - [DOXYFILE_PATH *STR*](#doxyfile_path-str) +- [Prepare the Catch Test Framework `prepare_catch.cmake`](#prepare-the-catch-test-framework-prepare_catchcmake) + - [Optional Arguments](#optional-arguments-2) + - [COMPILED_CATCH](#compiled_catch) + - [CATCH1](#catch1) + - [CLONE](#clone) +- [Tools `tools.cmake`](#tools-toolscmake) + - [clang-tidy](#clang-tidy) + - [include-what-you-use](#include-what-you-use) + - [cppcheck](#cppcheck) +- [Formatting `formatting.cmake`](#formatting-formattingcmake) + - [clang-format](#clang-format) + - [cmake-format](#cmake-format) + +## C++ Standards [`c++-standards.cmake`](c++-standards.cmake) + +Using the functions `cxx_11()`, `cxx_14()`, `cxx_17()` or `cxx_20()` this adds the appropriate flags for both unix and MSVC compilers, even for those before 3.11 with improper support. + +These obviously force the standard to be required, and also disables compiler-specific extensions, ie `--std=gnu++11`. This helps to prevent fragmenting the code base with items not available elsewhere, adhering to the agreed C++ standards only. + +## Sanitizer Builds [`sanitizers.cmake`](sanitizers.cmake) + +Sanitizers are tools that perform checks during a program’s runtime and returns issues, and as such, along with unit testing, code coverage and static analysis, is another tool to add to the programmers toolbox. And of course, like the previous tools, are tragically simple to add into any project using CMake, allowing any project and developer to quickly and easily use. + +A quick rundown of the tools available, and what they do: +- [LeakSanitizer](https://clang.llvm.org/docs/LeakSanitizer.html) detects memory leaks, or issues where memory is allocated and never deallocated, causing programs to slowly consume more and more memory, eventually leading to a crash. +- [AddressSanitizer](https://clang.llvm.org/docs/AddressSanitizer.html) is a fast memory error detector. It is useful for detecting most issues dealing with memory, such as: + - Out of bounds accesses to heap, stack, global + - Use after free + - Use after return + - Use after scope + - Double-free, invalid free + - Memory leaks (using LeakSanitizer) +- [ThreadSanitizer](https://clang.llvm.org/docs/ThreadSanitizer.html) detects data races for multi-threaded code. +- [UndefinedBehaviourSanitizer](https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html) detects the use of various features of C/C++ that are explicitly listed as resulting in undefined behaviour. Most notably: + - Using misaligned or null pointer. + - Signed integer overflow + - Conversion to, from, or between floating-point types which would overflow the destination + - Division by zero + - Unreachable code +- [MemorySanitizer](https://clang.llvm.org/docs/MemorySanitizer.html) detects uninitialized reads. + +These are used by declaring the `USE_SANITIZER` CMake variable as one of: +- Address +- Memory +- MemoryWithOrigins +- Undefined +- Thread +- Address;Undefined +- Undefined;Address +- Leak + +## Code Coverage [`code-coverage.cmake`](code-coverage.cmake) + + + +> In computer science, test coverage is a measure used to describe the degree to which the source code of a program is executed when a particular test suite runs. A program with high test coverage, measured as a percentage, has had more of its source code executed during testing, which suggests it has a lower chance of containing undetected software bugs compared to a program with low test coverage. Many different metrics can be used to calculate test coverage; some of the most basic are the percentage of program subroutines and the percentage of program statements called during execution of the test suite. +> +> [Wikipedia, Code Coverage](https://en.wikipedia.org/wiki/Code_coverage) + +Code coverage is the detailing of, during the execution of a binary, which regions, functions, or lines of code are *actually* executed. This can be used in a number of ways, from figuring out areas that automated testing is lacking or not touching, to giving a user an instrumented binary to determine which areas of code are used most/least to determine which areas to focus on. Although this does come with the caveat that coverage is no guarantee of good testing, just of what code has been. + +Coverage here is supported on both GCC and Clang. GCC requires the `lcov` program, and Clang requires `llvm-cov` and `llvm-profdata`, often provided with the llvm toolchain. + +To enable, turn on the `CODE_COVERAGE` variable. + +### Added Targets + +- GCOV/LCOV: + - ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-${TARNGET_NAME} : Generates HTML code coverage report for the associated named target. + - ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. + - ccov-all-capture : Generates an all-merged.info file, for use with coverage dashboards (e.g. codecov.io, coveralls). +- LLVM-COV: + - ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-${TARGET_NAME} : Generates HTML code coverage report. + - ccov-rpt-${TARGET_NAME} : Prints to command line summary per-file coverage information. + - ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information. + - ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. + - ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line. + +### Usage + +To enable any code coverage instrumentation/targets, the single CMake option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or on the command line ie `-DCODE_COVERAGE=ON`. + +From this point, there are two primary methods for adding instrumentation to targets: +1. A blanket instrumentation by calling `add_code_coverage()`, where all targets in that directory and all subdirectories are automatically instrumented. +2. Per-target instrumentation by calling `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only that target is instrumented. This applies to both libraries and executables. + +To add coverage targets, such as calling `make ccov` to generate the actual coverage information for perusal or consumption, call `target_code_coverage(<TARGET_NAME>)` on an *executable* target. + +**NOTE:** For more options, please check the actual [`code-coverage.cmake`](code-coverage.cmake) file. + +#### Example 1 - All targets instrumented + +In this case, the coverage information reported will will be that of the `theLib` library target and `theExe` executable. + +##### 1a - Via global command + +``` +add_code_coverage() # Adds instrumentation to all targets + +add_library(theLib lib.cpp) + +add_executable(theExe main.cpp) +target_link_libraries(theExe PRIVATE theLib) +target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports. +``` + +##### 1b - Via target commands + +``` +add_library(theLib lib.cpp) +target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets. + +add_executable(theExe main.cpp) +target_link_libraries(theExe PRIVATE theLib) +target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports. +``` + +#### Example 2: Target instrumented, but with regex pattern of files to be excluded from report + +``` +add_executable(theExe main.cpp non_covered.cpp) +target_code_coverage(theExe EXCLUDE non_covered.cpp) # As an executable target, the reports will exclude the non-covered.cpp file. +``` + +#### Example 3: Target added to the 'ccov' and 'ccov-all' targets + +``` +add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders. + +add_executable(theExe main.cpp non_covered.cpp) +target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +``` + +## Compiler Options [`compiler-options.cmake`](compiler-options.cmake) + +Allows for easy use of some pre-made compiler options for the major compilers. + +Using `-DENABLE_ALL_WARNINGS=ON` will enable almost all of the warnings available for a compiler: + +| Compiler | Options | +| :------- | :------------ | +| MSVC | /W4 | +| GCC | -Wall -Wextra | +| Clang | -Wall -Wextra | + +Using `-DENABLE_EFFECTIVE_CXX=ON` adds the `-Weffc++` for both GCC and clang. + +Using `-DGENERATE_DEPENDENCY_DATA=ON` generates `.d` files along with regular object files on a per-source file basis on GCC/Clang compilers. These files contains the list of all header files used during compilation of that compilation unit. + +## Dependency Graph [`dependency-graph.cmake`](dependency-graph.cmake) + +CMake, with the dot application available, will build a visual representation of the library/executable dependencies, like so: + + +### Required Arguments + +#### OUTPUT_TYPE *STR* +The type of output of `dot` to produce. Can be whatever `dot` itself supports (eg. png, ps, pdf). + +### Optional Arguments + +#### ADD_TO_DEP_GRAPH +If specified, add this generated target to be a dependency of the more general `dep-graph` target. + +#### TARGET_NAME *STR* +The name to give the doc target. (Default: doc-${PROJECT_NAME}) + +#### OUTPUT_DIR *STR* +The directory to place the generated output + +## Doxygen [`doxygen.cmake`](doxygen.cmake) + +Builds doxygen documentation with a default 'Doxyfile.in' or with a specified one, and can make the results installable (under the `doc` install target) + +This can only be used once per project, as each target generated is as `doc-${PROJECT_NAME}` unless TARGET_NAME is specified. + +### Optional Arguments + +#### ADD_TO_DOC +If specified, adds this generated target to be a dependency of the more general `doc` target. + +#### INSTALLABLE +Adds the generated documentation to the generic `install` target, under the `documentation` installation group. + +#### PROCESS_DOXYFILE +If set, then will process the found Doxyfile through the CMAKE `configure_file` function for macro replacements before using it. (@ONLY) + +#### TARGET_NAME *STR* +The name to give the doc target. (Default: doc-${PROJECT_NAME}) + +#### OUTPUT_DIR *STR* +The directory to place the generated output. (Default: ${CMAKE_CURRENT_BINARY_DIR}/doc) + +#### INSTALL_PATH *STR* +The path to install the documenttation under. (if not specified, defaults to 'share/${PROJECT_NAME}) + +#### DOXYFILE_PATH *STR* +The given doxygen file to use/process. (Defaults to'${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile') + +## Prepare the Catch Test Framework [`prepare_catch.cmake`](prepare_catch.cmake) + +The included `prepare_catch` function contained within attempts to add the infrastructure necessary for automatically adding C/C++ tests using the Catch2 library, including either an interface or pre-compiled 'catch' target library. + +It first attempts to find the header on the local machine, and failing that, clones the single header variant for use. It does make the determination between pre-C++11 and will use Catch1.X rather than Catch2 (when cloned), automatically or forced.. Adds a subdirectory of tests/ if it exists from the macro's calling location. + +### Optional Arguments + +#### COMPILED_CATCH +If this option is specified, then generates the 'catch' target as a library with catch already pre-compiled as part of the library. Otherwise acts just an interface library for the header location. + +#### CATCH1 +Force the use of Catch1.X, rather than auto-detecting the C++ version in use. + +#### CLONE +Force cloning of Catch, rather than attempting to use a locally-found variant. + +## Tools [`tools.cmake`](tools.cmake) + +### clang-tidy + +> clang-tidy is a clang-based C++ “linter” tool. Its purpose is to provide an extensible framework for diagnosing and fixing typical programming errors, like style violations, interface misuse, or bugs that can be deduced via static analysis. clang-tidy is modular and provides a convenient interface for writing new checks. +> +> [clang-tidy page](https://clang.llvm.org/extra/clang-tidy/) + +When detected, [clang-tidy](https://clang.llvm.org/extra/clang-tidy/) can be enabled by using the option of `-DCLANG_TIDY=ON`, as it is disabled by default. + +To use, add the `clang_tidy()` function, with the arguments being the options to pass to the clang tidy program, such as '-checks=*'. + +### include-what-you-use + +This tool helps to organize headers for all files encompass all items being used in that file, without accidentally relying upon headers deep down a chain of other headers. This is disabled by default, and can be enabled via have the program installed and adding `-DIWYU=ON`. + +To use, add the `include_what_you_use()` function, with the arguments being the options to pass to the program. + +### cppcheck + +This tool is another static analyzer in the vein of clang-tidy, which focuses on having no false positives. This is by default disabled, and can be enabled via have the program installed and adding `-DCPPCHECK=ON`. + +To use, add the `cppcheck()` function, with the arguments being the options to pass to the program. + +## Formatting [`formatting.cmake`](formatting.cmake) + +### clang-format + +Allows to automatically perform code formatting using the clang-format program, by calling an easy-to-use target ala `make format`. It requires a target name, and the list of files to format. As well, if the target name is the name of another target, then all files associated with that target will be added, and the target name changed to be `format_<TARGET>`. As well, any targets otherwise listed with the files will also have their files imported for formatting. + +``` +file(GLOB_RECURSE ALL_CODE_FILES + ${PROJECT_SOURCE_DIR}/src/*.[ch]pp + ${PROJECT_SOURCE_DIR}/src/*.[ch] + ${PROJECT_SOURCE_DIR}/include/*.[h]pp + ${PROJECT_SOURCE_DIR}/include/*.[h] + ${PROJECT_SOURCE_DIR}/example/*.[ch]pp + ${PROJECT_SOURCE_DIR}/example/*.[ch] +) + +clang_format(TARGET_NAME ${ALL_CODE_FILES}) +``` + +### cmake-format + +Similar to the clang-format above, creates a target `cmake-format` when the `cmake_format(<FILES>)` function is defined in CMake scripts, and any <FILES> passed in will be formatted by the cmake-format program, if it is found. + +``` +file(GLOB_RECURSE CMAKE_FILES + CMakeLists.txt +) + +cmake_format(TARGET_NAME ${CMAKE_FILES}) +```
\ No newline at end of file diff --git a/config/sanitizer/code-coverage.cmake b/config/sanitizer/code-coverage.cmake new file mode 100644 index 0000000..8d765f7 --- /dev/null +++ b/config/sanitizer/code-coverage.cmake @@ -0,0 +1,536 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +# USAGE: To enable any code coverage instrumentation/targets, the single CMake +# option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or +# on the command line. +# +# From this point, there are two primary methods for adding instrumentation to +# targets: 1 - A blanket instrumentation by calling `add_code_coverage()`, where +# all targets in that directory and all subdirectories are automatically +# instrumented. 2 - Per-target instrumentation by calling +# `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only +# that target is instrumented. This applies to both libraries and executables. +# +# To add coverage targets, such as calling `make ccov` to generate the actual +# coverage information for perusal or consumption, call +# `target_code_coverage(<TARGET_NAME>)` on an *executable* target. +# +# Example 1: All targets instrumented +# +# In this case, the coverage information reported will will be that of the +# `theLib` library target and `theExe` executable. +# +# 1a: Via global command +# +# ~~~ +# add_code_coverage() # Adds instrumentation to all targets +# +# add_library(theLib lib.cpp) +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports. +# ~~~ +# +# 1b: Via target commands +# +# ~~~ +# add_library(theLib lib.cpp) +# target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets. +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports. +# ~~~ +# +# Example 2: Target instrumented, but with regex pattern of files to be excluded +# from report +# +# ~~~ +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe EXCLUDE non_covered.cpp test/*) # As an executable target, the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ +# +# Example 3: Target added to the 'ccov' and 'ccov-all' targets +# +# ~~~ +# add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders. +# +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ + +# Options +option( + CODE_COVERAGE + "Builds targets with code coverage instrumentation. (Requires GCC or Clang)" + OFF) + +# Programs +find_program(LLVM_COV_PATH llvm-cov) +find_program(LLVM_PROFDATA_PATH llvm-profdata) +find_program(LCOV_PATH lcov) +find_program(GENHTML_PATH genhtml) + +# Variables +set(CMAKE_COVERAGE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/ccov) + +# Common initialization/checks +if(CODE_COVERAGE AND NOT CODE_COVERAGE_ADDED) + set(CODE_COVERAGE_ADDED ON) + + # Common Targets + add_custom_target( + ccov-preprocessing + COMMAND ${CMAKE_COMMAND} -E make_directory + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY} + DEPENDS ccov-clean) + + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + # Messages + message(STATUS "Building with llvm Code Coverage Tools") + + if(NOT LLVM_COV_PATH) + message(FATAL_ERROR "llvm-cov not found! Aborting.") + else() + # Version number checking for 'EXCLUDE' compatibility + execute_process(COMMAND ${LLVM_COV_PATH} --version + OUTPUT_VARIABLE LLVM_COV_VERSION_CALL_OUTPUT) + string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" LLVM_COV_VERSION + ${LLVM_COV_VERSION_CALL_OUTPUT}) + + if(LLVM_COV_VERSION VERSION_LESS "7.0.0") + message( + WARNING + "target_code_coverage()/add_code_coverage_all_targets() 'EXCLUDE' option only available on llvm-cov >= 7.0.0" + ) + endif() + endif() + + # Targets + add_custom_target( + ccov-clean + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list) + + # Used to get the shared object file list before doing the main all- + # processing + add_custom_target( + ccov-libs + COMMAND ; + COMMENT "libs ready for coverage report.") + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + # Messages + message(STATUS "Building with lcov Code Coverage Tools") + + if(CMAKE_BUILD_TYPE) + string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type) + if(NOT ${upper_build_type} STREQUAL "DEBUG") + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + else() + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + if(NOT LCOV_PATH) + message(FATAL_ERROR "lcov not found! Aborting...") + endif() + if(NOT GENHTML_PATH) + message(FATAL_ERROR "genhtml not found! Aborting...") + endif() + + # Targets + add_custom_target(ccov-clean COMMAND ${LCOV_PATH} --directory + ${CMAKE_BINARY_DIR} --zerocounters) + + else() + set(CODE_COVERAGE_ADDED OFF) + message(STATUS "Code coverage requires Clang or GCC.(${CMAKE_C_COMPILER_ID})") + endif() +endif() + +# Adds code coverage instrumentation to a library, or instrumentation/targets +# for an executable target. +# ~~~ +# EXECUTABLE ADDED TARGETS: +# GCOV/LCOV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report for the associated named target. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# +# LLVM-COV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report. +# ccov-report-${TARGET_NAME} : Prints to command line summary per-file coverage information. +# ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line. +# +# Required: +# TARGET_NAME - Name of the target to generate code coverage for. +# Optional: +# AUTO - Adds the target to the 'ccov' target so that it can be run in a batch with others easily. Effective on executable targets. +# ALL - Adds the target to the 'ccov-all' and 'ccov-all-report' targets, which merge several executable targets coverage data to a single report. Effective on executable targets. +# EXTERNAL - For GCC's lcov, allows the profiling of 'external' files from the processing directory +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the patterns provided from coverage. **These do not copy to the 'all' targets.** +# OBJECTS <TARGETS> - For executables ONLY, if the provided targets are shared libraries, adds coverage information to the output +# ~~~ +function(target_code_coverage TARGET_NAME) + # Argument parsing + set(options AUTO ALL EXTERNAL) + set(multi_value_keywords EXCLUDE OBJECTS) + cmake_parse_arguments(target_code_coverage "${options}" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + + # Add code coverage instrumentation to the target's linker command + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-instr-generate + -fcoverage-mapping) + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fprofile-instr-generate ") + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fcoverage-mapping ") + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-arcs + -ftest-coverage) + target_link_libraries(${TARGET_NAME} PRIVATE gcov) + endif() + + # Targets + get_target_property(target_type ${TARGET_NAME} TYPE) + + # Add shared library to processing for 'all' targets + if(target_type STREQUAL "SHARED_LIBRARY" AND target_code_coverage_ALL) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + if(NOT TARGET ccov-libs) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-libs ccov-run-${TARGET_NAME}) + endif() + endif() + + # For executables add targets to run and produce output + if(target_type STREQUAL "EXECUTABLE") + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?Cc]lang") + + # If there are shared objects to also work with, generate the string to + # add them here + foreach(SO_TARGET ${target_code_coverage_OBJECTS}) + # Check to see if the target is a shared object + if(TARGET ${SO_TARGET}) + get_target_property(SO_TARGET_TYPE ${SO_TARGET} TYPE) + if(${SO_TARGET_TYPE} STREQUAL "SHARED_LIBRARY") + set(SO_OBJECTS ${SO_OBJECTS} -object=$<TARGET_FILE:${SO_TARGET}>) + endif() + endif() + endforeach() + + # Run the executable, generating raw profile data + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND LLVM_PROFILE_FILE=${TARGET_NAME}.profraw + $<TARGET_FILE:${TARGET_NAME}> + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND echo "${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}.profraw " >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list + DEPENDS ccov-preprocessing ccov-libs ${TARGET_NAME}) + + # Merge the generated profile data so llvm-cov can process it + add_custom_target( + ccov-processing-${TARGET_NAME} + COMMAND ${LLVM_PROFDATA_PATH} merge -sparse ${TARGET_NAME}.profraw -o + ${TARGET_NAME}.profdata + DEPENDS ccov-run-${TARGET_NAME}) + + # Ignore regex only works on LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print out details of the coverage information to the command line + add_custom_target( + ccov-show-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Print out a summary of the coverage information to the command line + add_custom_target( + ccov-report-${TARGET_NAME} + COMMAND ${LLVM_COV_PATH} report $<TARGET_FILE:${TARGET_NAME}> + ${SO_OBJECTS} -instr-profile=${TARGET_NAME}.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO + "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}.info") + + # Run the executable, generating coverage information + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND $<TARGET_FILE:${TARGET_NAME}> + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generate exclusion string for use + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + if(NOT ${target_code_coverage_EXTERNAL}) + set(EXTERNAL_OPTION --no-external) + endif() + + # Capture coverage data + add_custom_target( + ccov-capture-${TARGET_NAME} + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters + COMMAND $<TARGET_FILE:${TARGET_NAME}> + COMMAND + ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory + ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file + ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND ${GENHTML_PATH} -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + ${COVERAGE_INFO} + DEPENDS ccov-capture-${TARGET_NAME}) + endif() + + add_custom_command( + TARGET ccov-${TARGET_NAME} + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}/index.html in your browser to view the coverage report." + ) + + # AUTO + if(target_code_coverage_AUTO) + if(NOT TARGET ccov) + add_custom_target(ccov) + endif() + add_dependencies(ccov ccov-${TARGET_NAME}) + + if(NOT CMAKE_COMPILER_IS_GNUCXX) + if(NOT TARGET ccov-report) + add_custom_target(ccov-report) + endif() + add_dependencies(ccov-report ccov-report-${TARGET_NAME}) + endif() + endif() + + # ALL + if(target_code_coverage_ALL) + if(NOT TARGET ccov-all-processing) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-all-processing ccov-run-${TARGET_NAME}) + endif() + endif() + endif() +endfunction() + +# Adds code coverage instrumentation to all targets in the current directory and +# any subdirectories. To add coverage instrumentation to only specific targets, +# use `target_code_coverage`. +function(add_code_coverage) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_compile_options(-fprofile-instr-generate -fcoverage-mapping) + add_link_options(-fprofile-instr-generate -fcoverage-mapping) + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + add_compile_options(-fprofile-arcs -ftest-coverage) + link_libraries(gcov) + endif() +endfunction() + +# Adds the 'ccov-all' type targets that calls all targets added via +# `target_code_coverage` with the `ALL` parameter, but merges all the coverage +# data from them into a single large report instead of the numerous smaller +# reports. Also adds the ccov-all-capture Generates an all-merged.info file, for +# use with coverage dashboards (e.g. codecov.io, coveralls). +# ~~~ +# Optional: +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the regex patterns provided from coverage. +# ~~~ +function(add_code_coverage_all_targets) + # Argument parsing + set(multi_value_keywords EXCLUDE) + cmake_parse_arguments(add_code_coverage_all_targets "" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + + # Merge the profile data for all of the run executables + add_custom_target( + ccov-all-processing + COMMAND + ${LLVM_PROFDATA_PATH} merge -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata -sparse `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list`) + + # Regex exclude only available for LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print summary of the code coverage information to the command line + add_custom_target( + ccov-all-report + COMMAND + ${LLVM_COV_PATH} report `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + # Export coverage information so continuous integration tools (e.g. + # Jenkins) can consume it + add_custom_target( + ccov-all-export + COMMAND + ${LLVM_COV_PATH} export `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -format="text" ${EXCLUDE_REGEX} > + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json + DEPENDS ccov-all-processing) + + # Generate HTML output of all added targets for perusal + add_custom_target( + ccov-all + COMMAND + ${LLVM_COV_PATH} show `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.info") + + # Nothing required for gcov + add_custom_target(ccov-all-processing COMMAND ;) + + # Exclusion regex string creation + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + # Capture coverage data + add_custom_target( + ccov-all-capture + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture + --output-file ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-all-processing) + + # Generates HTML output of all targets for perusal + add_custom_target( + ccov-all + COMMAND ${GENHTML_PATH} -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + ${COVERAGE_INFO} + DEPENDS ccov-all-capture) + + endif() + + add_custom_command( + TARGET ccov-all + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged/index.html in your browser to view the coverage report." + ) + endif() +endfunction() diff --git a/config/sanitizer/sanitizers.cmake b/config/sanitizer/sanitizers.cmake new file mode 100644 index 0000000..0803279 --- /dev/null +++ b/config/sanitizer/sanitizers.cmake @@ -0,0 +1,94 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +set(USE_SANITIZER + "" + CACHE + STRING + "Compile with a sanitizer. Options are: Address, Memory, MemoryWithOrigins, Undefined, Thread, Leak, 'Address;Undefined'" +) + +function(append value) + foreach(variable ${ARGN}) + set(${variable} + "${${variable}} ${value}" + PARENT_SCOPE) + endforeach(variable) +endfunction() + +message(STATUS "USE_SANITIZER=${USE_SANITIZER}, CMAKE_C_COMPILER_ID=${CMAKE_C_COMPILER_ID}") +if(USE_SANITIZER) + if(INTEL_CLANG OR "${CMAKE_C_COMPILER_ID}" MATCHES "Clang") + set(CMAKE_EXPORT_COMPILE_COMMANDS ON) + + append("-fno-omit-frame-pointer" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + message(STATUS "Building with sanitize, base flags=${CMAKE_C_SANITIZER_FLAGS}") + + if(UNIX) + if(uppercase_CMAKE_BUILD_TYPE STREQUAL "DEBUG") + append("-O1" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + endif() + + if(USE_SANITIZER MATCHES "([Aa]ddress);([Uu]ndefined)" + OR USE_SANITIZER MATCHES "([Uu]ndefined);([Aa]ddress)") + message(STATUS "Building with Address, Undefined sanitizers") + append("-fsanitize=address,undefined" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE AddressSanitizer) + elseif(USE_SANITIZER MATCHES "([Aa]ddress)") + # Optional: -fno-optimize-sibling-calls -fsanitize-address-use-after-scope + message(STATUS "Building with Address sanitizer") + append("-fsanitize=address" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE AddressSanitizer) + elseif(USE_SANITIZER MATCHES "([Mm]emory([Ww]ith[Oo]rigins)?)") + # Optional: -fno-optimize-sibling-calls -fsanitize-memory-track-origins=2 + append("-fsanitize=memory" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + if(USE_SANITIZER MATCHES "([Mm]emory[Ww]ith[Oo]rigins)") + message(STATUS "Building with MemoryWithOrigins sanitizer") + append("-fsanitize-memory-track-origins" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + else() + message(STATUS "Building with Memory sanitizer") + endif() + set(MEMCHECK_TYPE MemorySanitizer) + elseif(USE_SANITIZER MATCHES "([Uu]ndefined)") + message(STATUS "Building with Undefined sanitizer") + append("-fsanitize=undefined" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + if(EXISTS "${BLACKLIST_FILE}") + append("-fsanitize-blacklist=${BLACKLIST_FILE}" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + endif() + set(MEMCHECK_TYPE UndefinedBehaviorSanitizer) + elseif(USE_SANITIZER MATCHES "([Tt]hread)") + message(STATUS "Building with Thread sanitizer") + append("-fsanitize=thread" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE ThreadSanitizer) + elseif(USE_SANITIZER MATCHES "([Ll]eak)") + message(STATUS "Building with Leak sanitizer") + append("-fsanitize=leak" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE LeakSanitizer) + else() + message( + FATAL_ERROR "Unsupported value of USE_SANITIZER: ${USE_SANITIZER}") + endif() + elseif(MSVC) + if(USE_SANITIZER MATCHES "([Aa]ddress)") + message(STATUS "Building with Address sanitizer") + append("-fsanitize=address" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + else() + message(FATAL_ERROR "This sanitizer not yet supported in the MSVC environment: ${USE_SANITIZER}") + endif() + else() + message(FATAL_ERROR "USE_SANITIZER is not supported on this platform.") + endif() + endif() +endif() diff --git a/config/sanitizer/tools.cmake b/config/sanitizer/tools.cmake new file mode 100644 index 0000000..a44022f --- /dev/null +++ b/config/sanitizer/tools.cmake @@ -0,0 +1,111 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +option(CLANG_TIDY "Turns on clang-tidy processing if it is found." OFF) +option(IWYU "Turns on include-what-you-use processing if it is found." OFF) +option(CPPCHECK "Turns on cppcheck processing if it is found." OFF) + +# Adds clang-tidy checks to the compilation, with the given arguments being used +# as the options set. +macro(clang_tidy) + if(CLANG_TIDY AND CLANG_TIDY_EXE) + set(CMAKE_CXX_CLANG_TIDY ${CLANG_TIDY_EXE} ${ARGN}) + endif() +endmacro() + +# Adds include_what_you_use to the compilation, with the given arguments being +# used as the options set. +macro(include_what_you_use) + if(IWYU AND IWYU_EXE) + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE "${IWYU_EXE};${IWYU_STRING}") + endif() +endmacro() + +# Adds cppcheck to the compilation, with the given arguments being used as the +# options set. +macro(cppcheck) + if(CPPCHECK AND CPPCHECK_EXE) + set(CMAKE_CXX_CPPCHECK "${CPPCHECK_EXE};${CPPCHECK_STRING}") + endif() +endmacro() + +find_program(CLANG_TIDY_EXE NAMES "clang-tidy") +if(CLANG_TIDY_EXE) + message(STATUS "clang-tidy found: ${CLANG_TIDY_EXE}") + if(NOT CLANG_TIDY) + message(STATUS "clang-tidy NOT ENABLED via 'CLANG_TIDY' variable!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(CLANG_TIDY) + message(SEND_ERROR "Cannot enable clang-tidy, as executable not found!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "clang-tidy not found!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it +endif() + +find_program(IWYU_EXE NAMES "include-what-you-use") +if(IWYU_EXE) + message(STATUS "include-what-you-use found: ${IWYU_EXE}") + if(NOT IWYU) + message(STATUS "include-what-you-use NOT ENABLED via 'IWYU' variable!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(IWYU) + message( + SEND_ERROR "Cannot enable include-what-you-use, as executable not found!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "include-what-you-use not found!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it +endif() + +find_program(CPPCHECK_EXE NAMES "cppcheck") +if(CPPCHECK_EXE) + message(STATUS "cppcheck found: ${CPPCHECK_EXE}") + if(CPPECHECK) + set(CMAKE_CXX_CPPCHECK + "${CPPCHECK_EXE};--enable=warning,performance,portability,missingInclude;--template=\"[{severity}][{id}] {message} {callstack} \(On {file}:{line}\)\";--suppress=missingIncludeSystem;--quiet;--verbose;--force" + ) + endif() + if(NOT CPPCHECK) + message(STATUS "cppcheck NOT ENABLED via 'CPPCHECK' variable!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(CPPCHECK) + message(SEND_ERROR "Cannot enable cppcheck, as executable not found!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "cppcheck not found!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it +endif() diff --git a/config/toolchain/GCC.cmake b/config/toolchain/GCC.cmake new file mode 100644 index 0000000..c41d0ca --- /dev/null +++ b/config/toolchain/GCC.cmake @@ -0,0 +1,11 @@ +# Uncomment the following line and the correct system name to use cross-compiling +#set(CMAKE_SYSTEM_NAME Linux) + +set(CMAKE_COMPILER_VENDOR "GCC") + +set(CMAKE_C_COMPILER cc) +set(CMAKE_CXX_COMPILER c++) +set(CMAKE_Fortran_COMPILER gfortran) + +# the following is used if cross-compiling +set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/PGI.cmake b/config/toolchain/PGI.cmake new file mode 100644 index 0000000..ec58cbb --- /dev/null +++ b/config/toolchain/PGI.cmake @@ -0,0 +1,11 @@ +# Uncomment the following to use cross-compiling +#set(CMAKE_SYSTEM_NAME Linux) + +set(CMAKE_COMPILER_VENDOR "PGI") + +set(CMAKE_C_COMPILER pgcc) +set(CMAKE_CXX_COMPILER pgc++) +set(CMAKE_Fortran_COMPILER pgf90) + +# the following is used if cross-compiling +set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/build32.cmake b/config/toolchain/build32.cmake new file mode 100644 index 0000000..a2566c3 --- /dev/null +++ b/config/toolchain/build32.cmake @@ -0,0 +1,79 @@ +if (WIN32) + set (CMAKE_SYSTEM_NAME Windows) + set (CMAKE_GENERATOR_PLATFORM "x86") +elseif(APPLE) + set (CMAKE_OSX_ARCHITECTURES "i386") +elseif(MINGW) + set (CMAKE_SYSTEM_NAME Windows) + set (TOOLCHAIN_PREFIX i686-w64-mingw32) + set (CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}-gcc) + set (CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}-g++) + set (CMAKE_RC_COMPILER ${TOOLCHAIN_PREFIX}-windres) + set (CMAKE_Fortran_COMPILER ${TOOLCHAIN_PREFIX}-gfortran) + + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -m32" CACHE STRING "c++ flags") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -m32" CACHE STRING "c flags") + + set (LIB32 /usr/lib) # Fedora + + if (EXISTS "/usr/lib32") + set (LIB32 /usr/lib32) # Arch, Solus + endif () + + set (CMAKE_SYSTEM_LIBRARY_PATH ${LIB32} CACHE STRING "system library search path" FORCE) + set (CMAKE_LIBRARY_PATH ${LIB32} CACHE STRING "library search path" FORCE) + + # this is probably unlikely to be needed, but just in case + set (CMAKE_EXE_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "executable linker flags" FORCE) + set (CMAKE_SHARED_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "shared library linker flags" FORCE) + set (CMAKE_MODULE_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "module linker flags" FORCE) + + # on Fedora and Arch and similar, point pkgconfig at 32 bit .pc files. We have + # to include the regular system .pc files as well (at the end), because some + # are not always present in the 32 bit directory + if (EXISTS "${LIB32}/pkgconfig") + set (ENV{PKG_CONFIG_LIBDIR} ${LIB32}/pkgconfig:/usr/share/pkgconfig:/usr/lib/pkgconfig:/usr/lib64/pkgconfig) + endif () + + set (CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX}) + set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) + set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) + set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) + set (CMAKE_CROSSCOMPILING_EMULATOR wine) + + include_directories(/usr/${TOOLCHAIN_PREFIX}/include) + set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS On CACHE BOOL "Export windows symbols") +else () + set (CMAKE_SYSTEM_NAME Linux) + + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -m32" CACHE STRING "c++ flags") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -m32" CACHE STRING "c flags") + + set (LIB32 /usr/lib) # Fedora + + if (EXISTS "/usr/lib32") + set (LIB32 /usr/lib32) # Arch, Solus + endif () + + set (CMAKE_SYSTEM_LIBRARY_PATH ${LIB32} CACHE STRING "system library search path" FORCE) + set (CMAKE_LIBRARY_PATH ${LIB32} CACHE STRING "library search path" FORCE) + + # this is probably unlikely to be needed, but just in case + set (CMAKE_EXE_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "executable linker flags" FORCE) + set (CMAKE_SHARED_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "shared library linker flags" FORCE) + set (CMAKE_MODULE_LINKER_FLAGS "-m32 -L${LIB32}" CACHE STRING "module linker flags" FORCE) + + # on Fedora and Arch and similar, point pkgconfig at 32 bit .pc files. We have + # to include the regular system .pc files as well (at the end), because some + # are not always present in the 32 bit directory + if (EXISTS "${LIB32}/pkgconfig") + set (ENV{PKG_CONFIG_LIBDIR} ${LIB32}/pkgconfig:/usr/share/pkgconfig:/usr/lib/pkgconfig:/usr/lib64/pkgconfig) + endif () +# where is the target environment + set (CMAKE_FIND_ROOT_PATH ${LIB32}) +# search for programs in the build host directories + set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) +# for libraries and headers in the target directories + set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) + set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) +endif () diff --git a/config/toolchain/clang.cmake b/config/toolchain/clang.cmake new file mode 100644 index 0000000..5e3b13a --- /dev/null +++ b/config/toolchain/clang.cmake @@ -0,0 +1,11 @@ +# Uncomment the following to use cross-compiling +#set(CMAKE_SYSTEM_NAME Linux) + +set(CMAKE_COMPILER_VENDOR "clang") + +set(CMAKE_C_COMPILER clang) +set(CMAKE_CXX_COMPILER clang++) +set(CMAKE_EXPORT_COMPILE_COMMANDS ON) + +# the following is used if cross-compiling +set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/crayle.cmake b/config/toolchain/crayle.cmake new file mode 100644 index 0000000..bf7cf69 --- /dev/null +++ b/config/toolchain/crayle.cmake @@ -0,0 +1,10 @@ +# The following line will use cross-compiling +set(CMAKE_SYSTEM_NAME Linux) + +set(CMAKE_COMPILER_VENDOR "CrayLinuxEnvironment") + +set(CMAKE_C_COMPILER cc) +set(CMAKE_Fortran_COMPILER ftn) + +# the following is used if cross-compiling +set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/intel.cmake b/config/toolchain/intel.cmake new file mode 100644 index 0000000..ae1d2f8 --- /dev/null +++ b/config/toolchain/intel.cmake @@ -0,0 +1,18 @@ +# Uncomment the following to use cross-compiling +#set(CMAKE_SYSTEM_NAME Linux) + +set(CMAKE_COMPILER_VENDOR "intel") + +if(USE_SANITIZER) + set(CMAKE_C_COMPILER icl) + set(CMAKE_CXX_COMPILER icl++) + set(CMAKE_Fortran_COMPILER ifort) + set(INTEL_CLANG ON) +else () + set(CMAKE_C_COMPILER icc) + set(CMAKE_CXX_COMPILER icpc) + set(CMAKE_Fortran_COMPILER ifort) +endif () + +# the following is used if cross-compiling +set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/mingw64.cmake b/config/toolchain/mingw64.cmake new file mode 100644 index 0000000..1830488 --- /dev/null +++ b/config/toolchain/mingw64.cmake @@ -0,0 +1,14 @@ +set(TOOLCHAIN_PREFIX x86_64-w64-mingw32) +set (CMAKE_SYSTEM_NAME Windows) +set (CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}-gcc) +set (CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}-g++) +set (CMAKE_RC_COMPILER ${TOOLCHAIN_PREFIX}-windres) +set (CMAKE_Fortran_COMPILER ${TOOLCHAIN_PREFIX}-gfortran) +set (CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX}) +set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) +set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) +set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) +set (CMAKE_CROSSCOMPILING_EMULATOR wine64) + +include_directories(/usr/${TOOLCHAIN_PREFIX}/include) +set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS On CACHE BOOL "Export windows symbols") |