diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/cmake/CPack.cmake | 597 |
1 files changed, 330 insertions, 267 deletions
diff --git a/config/cmake/CPack.cmake b/config/cmake/CPack.cmake index 2e6b23a..d96fe43 100644 --- a/config/cmake/CPack.cmake +++ b/config/cmake/CPack.cmake @@ -1,5 +1,7 @@ -# - Build binary and source package installers -# +##section Variables common to all CPack generators +##end +##module +# - Build binary and source package installers. # The CPack module generates binary and source installers in a variety # of formats using the cpack program. Inclusion of the CPack module # adds two new targets to the resulting makefiles, package and @@ -29,16 +31,16 @@ # on a per-generator basis. It only need contain overrides. # # Here's how it works: -# - cpack runs -# - it includes CPackConfig.cmake -# - it iterates over the generators listed in that file's -# CPACK_GENERATOR list variable (unless told to use just a -# specific one via -G on the command line...) +# - cpack runs +# - it includes CPackConfig.cmake +# - it iterates over the generators listed in that file's +# CPACK_GENERATOR list variable (unless told to use just a +# specific one via -G on the command line...) # -# - foreach generator, it then -# - sets CPACK_GENERATOR to the one currently being iterated -# - includes the CPACK_PROJECT_CONFIG_FILE -# - produces the package for that generator +# - foreach generator, it then +# - sets CPACK_GENERATOR to the one currently being iterated +# - includes the CPACK_PROJECT_CONFIG_FILE +# - produces the package for that generator # # This is the key: For each generator listed in CPACK_GENERATOR # in CPackConfig.cmake, cpack will *reset* CPACK_GENERATOR @@ -48,174 +50,225 @@ # Before including this CPack module in your CMakeLists.txt file, # there are a variety of variables that can be set to customize # the resulting installers. The most commonly-used variables are: -# -# CPACK_PACKAGE_NAME - The name of the package (or application). If -# not specified, defaults to the project name. -# -# CPACK_PACKAGE_VENDOR - The name of the package vendor (e.g., -# "Kitware"). -# -# CPACK_PACKAGE_VERSION_MAJOR - Package major Version -# -# CPACK_PACKAGE_VERSION_MINOR - Package minor Version -# -# CPACK_PACKAGE_VERSION_PATCH - Package patch Version -# -# CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the -# project. Used, for example, the introduction screen of a -# CPack-generated Windows installer to describe the project. -# -# CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the -# project (only a few words). -# -# CPACK_PACKAGE_FILE_NAME - The name of the package file to generate, -# not including the extension. For example, cmake-2.6.1-Linux-i686. -# -# CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the -# target system, e.g., "CMake 2.5". -# -# CPACK_PROJECT_CONFIG_FILE - File included at cpack time, once per -# generator after setting CPACK_GENERATOR to the actual generator -# being used. Allows per-generator setting of CPACK_* variables at -# cpack time. -# -# CPACK_RESOURCE_FILE_LICENSE - License file for the project, which -# will typically be displayed to the user (often with an explicit -# "Accept" button, for graphical installers) prior to installation. -# -# CPACK_RESOURCE_FILE_README - ReadMe file for the project, which -# typically describes in some detail -# -# CPACK_RESOURCE_FILE_WELCOME - Welcome file for the project, which -# welcomes users to this installer. Typically used in the graphical -# installers on Windows and Mac OS X. -# -# CPACK_MONOLITHIC_INSTALL - Disables the component-based -# installation mechanism, so that all components are always installed. -# -# CPACK_GENERATOR - List of CPack generators to use. If not -# specified, CPack will create a set of options (e.g., -# CPACK_BINARY_NSIS) allowing the user to enable/disable individual -# generators. -# -# CPACK_OUTPUT_CONFIG_FILE - The name of the CPack configuration file -# for binary installers that will be generated by the CPack -# module. Defaults to CPackConfig.cmake. -# -# CPACK_PACKAGE_EXECUTABLES - Lists each of the executables along -# with a text label, to be used to create Start Menu shortcuts on -# Windows. For example, setting this to the list ccmake;CMake will -# create a shortcut named "CMake" that will execute the installed -# executable ccmake. -# -# CPACK_STRIP_FILES - List of files to be stripped. Starting with -# CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which -# enables stripping of all files (a list of files evaluates to TRUE -# in CMake, so this change is compatible). -# -# The following CPack variables are specific to source packages, and +##end +# +##variable +# CPACK_PACKAGE_NAME - The name of the package (or application). If +# not specified, defaults to the project name. +##end +# +##variable +# CPACK_PACKAGE_VENDOR - The name of the package vendor. (e.g., +# "Kitware"). +##end +# +##variable +# CPACK_PACKAGE_DIRECTORY - The directory in which CPack is doing its +# packaging. If it is not set then this will default (internally) to the +# build dir. This variable may be defined in CPack config file or from +# the cpack command line option "-B". If set the command line option +# override the value found in the config file. +##end +# +##variable +# CPACK_PACKAGE_VERSION_MAJOR - Package major Version +##end +# +##variable +# CPACK_PACKAGE_VERSION_MINOR - Package minor Version +##end +# +##variable +# CPACK_PACKAGE_VERSION_PATCH - Package patch Version +##end +# +##variable +# CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the +# project. Used, for example, the introduction screen of a +# CPack-generated Windows installer to describe the project. +##end +# +##variable +# CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the +# project (only a few words). +##end +# +##variable +# CPACK_PACKAGE_FILE_NAME - The name of the package file to generate, +# not including the extension. For example, cmake-2.6.1-Linux-i686. +# The default value is +# +# ${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}. +##end +# +##variable +# CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the +# target system. This may be used by some CPack generators +# like NSIS to create an installation directory e.g., "CMake 2.5" +# below the installation prefix. All installed element will be +# put inside this directory. +##end +# +##variable +# CPACK_PACKAGE_ICON - A branding image that will be displayed inside +# the installer (used by GUI installers). +##end +# +##variable +# CPACK_PROJECT_CONFIG_FILE - CPack-time project CPack configuration +# file. This file included at cpack time, once per +# generator after CPack has set CPACK_GENERATOR to the actual generator +# being used. It allows per-generator setting of CPACK_* variables at +# cpack time. +##end +# +##variable +# CPACK_RESOURCE_FILE_LICENSE - License to be embedded in the installer. It +# will typically be displayed to the user by the produced installer +# (often with an explicit "Accept" button, for graphical installers) +# prior to installation. This license file is NOT added to installed +# file but is used by some CPack generators like NSIS. If you want +# to install a license file (may be the same as this one) +# along with your project you must add an appropriate CMake INSTALL +# command in your CMakeLists.txt. +##end +# +##variable +# CPACK_RESOURCE_FILE_README - ReadMe file to be embedded in the installer. It +# typically describes in some detail the purpose of the project +# during the installation. Not all CPack generators uses +# this file. +##end +# +##variable +# CPACK_RESOURCE_FILE_WELCOME - Welcome file to be embedded in the +# installer. It welcomes users to this installer. +# Typically used in the graphical installers on Windows and Mac OS X. +##end +# +##variable +# CPACK_MONOLITHIC_INSTALL - Disables the component-based +# installation mechanism. When set the component specification is ignored +# and all installed items are put in a single "MONOLITHIC" package. +# Some CPack generators do monolithic packaging by default and +# may be asked to do component packaging by setting +# CPACK_<GENNAME>_COMPONENT_INSTALL to 1/TRUE. +##end +# +##variable +# CPACK_GENERATOR - List of CPack generators to use. If not +# specified, CPack will create a set of options CPACK_BINARY_<GENNAME> (e.g., +# CPACK_BINARY_NSIS) allowing the user to enable/disable individual +# generators. This variable may be used on the command line +# as well as in: +# +# cpack -D CPACK_GENERATOR="ZIP;TGZ" /path/to/build/tree +##end +# +##variable +# CPACK_OUTPUT_CONFIG_FILE - The name of the CPack binary configuration +# file. This file is the CPack configuration generated by the CPack module +# for binary installers. Defaults to CPackConfig.cmake. +##end +# +##variable +# CPACK_PACKAGE_EXECUTABLES - Lists each of the executables and associated +# text label to be used to create Start Menu shortcuts. For example, +# setting this to the list ccmake;CMake will +# create a shortcut named "CMake" that will execute the installed +# executable ccmake. Not all CPack generators use it (at least NSIS and +# OSXX11 do). +##end +# +##variable +# CPACK_STRIP_FILES - List of files to be stripped. Starting with +# CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which +# enables stripping of all files (a list of files evaluates to TRUE +# in CMake, so this change is compatible). +##end +# +# The following CPack variables are specific to source packages, and # will not affect binary packages: # -# CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package, -# e.g., cmake-2.6.1 -# -# CPACK_SOURCE_STRIP_FILES - List of files in the source tree that -# will be stripped. Starting with CMake 2.6.0 -# CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables -# stripping of all files (a list of files evaluates to TRUE in CMake, -# so this change is compatible). -# -# CPACK_SOURCE_GENERATOR - List of generators used for the source -# packages. As with CPACK_GENERATOR, if this is not specified then -# CPack will create a set of options (e.g., CPACK_SOURCE_ZIP) -# allowing users to select which packages will be generated. -# -# CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack -# configuration file for source installers that will be generated by -# the CPack module. Defaults to CPackSourceConfig.cmake. -# -# CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree -# that won't be packaged when building a source package. This is a -# list of patterns, e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.* -# -# The following variables are specific to the DragNDrop installers -# built on Mac OS X: -# -# CPACK_DMG_VOLUME_NAME - The volume name of the generated disk -# image. Defaults to CPACK_PACKAGE_FILE_NAME. -# -# CPACK_DMG_FORMAT - The disk image format. Common values are UDRO -# (UDIF read-only), UDZO (UDIF zlib-compressed) or UDBZ (UDIF -# bzip2-compressed). Refer to hdiutil(1) for more information on -# other available formats. -# -# CPACK_DMG_DS_STORE - Path to a custom .DS_Store file which e.g. -# can be used to specify the Finder window position/geometry and -# layout (such as hidden toolbars, placement of the icons etc.). -# This file has to be generated by the Finder (either manually or -# through OSA-script) using a normal folder from which the .DS_Store -# file can then be extracted. -# -# CPACK_DMG_BACKGROUND_IMAGE - Path to an image file which is to be -# used as the background for the Finder Window when the disk image -# is opened. By default no background image is set. The background -# image is applied after applying the custom .DS_Store file. -# -# CPACK_COMMAND_HDIUTIL - Path to the hdiutil(1) command used to -# operate on disk image files on Mac OS X. This variable can be used -# to override the automatically detected command (or specify its -# location if the auto-detection fails to find it.) -# -# CPACK_COMMAND_SETFILE - Path to the SetFile(1) command used to set -# extended attributes on files and directories on Mac OS X. This -# variable can be used to override the automatically detected -# command (or specify its location if the auto-detection fails to -# find it.) -# -# CPACK_COMMAND_REZ - Path to the Rez(1) command used to compile -# resources on Mac OS X. This variable can be used to override the -# automatically detected command (or specify its location if the -# auto-detection fails to find it.) -# -# The following variable is specific to installers build on Mac OS X -# using PackageMaker: -# -# CPACK_OSX_PACKAGE_VERSION - The version of Mac OS X that the -# resulting PackageMaker archive should be compatible -# with. Different versions of Mac OS X support different -# features. For example, CPack can only build component-based -# installers for Mac OS X 10.4 or newer, and can only build -# installers that download component son-the-fly for Mac OS X 10.5 -# or newer. If left blank, this value will be set to the minimum -# version of Mac OS X that supports the requested features. Set this -# variable to some value (e.g., 10.4) only if you want to guarantee -# that your installer will work on that version of Mac OS X, and -# don't mind missing extra features available in the installer -# shipping with later versions of Mac OS X. +##variable +# CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package. For +# example cmake-2.6.1. +##end +# +##variable +# CPACK_SOURCE_STRIP_FILES - List of files in the source tree that +# will be stripped. Starting with CMake 2.6.0 +# CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables +# stripping of all files (a list of files evaluates to TRUE in CMake, +# so this change is compatible). +##end +# +##variable +# CPACK_SOURCE_GENERATOR - List of generators used for the source +# packages. As with CPACK_GENERATOR, if this is not specified then +# CPack will create a set of options (e.g., CPACK_SOURCE_ZIP) +# allowing users to select which packages will be generated. +##end +# +##variable +# CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack source +# configuration file. This file is the CPack configuration generated by the +# CPack module for source installers. Defaults to CPackSourceConfig.cmake. +##end +# +##variable +# CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree +# that won't be packaged when building a source package. This is a +# list of regular expression patterns (that must be properly escaped), +# e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.* +##end # # The following variables are for advanced uses of CPack: # -# CPACK_CMAKE_GENERATOR - What CMake generator should be used if the -# project is CMake project. Defaults to the value of CMAKE_GENERATOR; -# few users will want to change this setting. -# -# CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify -# what project to install. The four values are: Build directory, -# Project Name, Project Component, Directory. If omitted, CPack will -# build an installer that installers everything. -# -# CPACK_SYSTEM_NAME - System name, defaults to the value of -# ${CMAKE_SYSTEM_NAME}. -# -# CPACK_PACKAGE_VERSION - Package full version, used internally. By -# default, this is built from CPACK_PACKAGE_VERSION_MAJOR, -# CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH. -# -# CPACK_TOPLEVEL_TAG - Directory for the installed files. -# -# CPACK_INSTALL_COMMANDS - Extra commands to install components. -# -# CPACK_INSTALLED_DIRECTORIES - Extra directories to install. +##variable +# CPACK_CMAKE_GENERATOR - What CMake generator should be used if the +# project is CMake project. Defaults to the value of CMAKE_GENERATOR +# few users will want to change this setting. +##end +# +##variable +# CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify +# what project to install. The four values are: Build directory, +# Project Name, Project Component, Directory. If omitted, CPack will +# build an installer that installers everything. +##end +# +##variable +# CPACK_SYSTEM_NAME - System name, defaults to the value of +# ${CMAKE_SYSTEM_NAME}. +##end +# +##variable +# CPACK_PACKAGE_VERSION - Package full version, used internally. By +# default, this is built from CPACK_PACKAGE_VERSION_MAJOR, +# CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH. +##end +# +##variable +# CPACK_TOPLEVEL_TAG - Directory for the installed files. +##end +# +##variable +# CPACK_INSTALL_COMMANDS - Extra commands to install components. +##end +# +##variable +# CPACK_INSTALLED_DIRECTORIES - Extra directories to install. +##end +# +##variable +# CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when +# installing this project. This is only used +# by installer for Windows. +##end +##variable +# CPACK_CREATE_DESKTOP_LINKS - List of desktop links to create. +##end # #============================================================================= @@ -232,48 +285,48 @@ # License text for the above reference.) # Define this var in order to avoid (or warn) concerning multiple inclusion -IF(CPack_CMake_INCLUDED) - MESSAGE(WARNING "CPack.cmake has already been included!!") -ELSE(CPack_CMake_INCLUDED) - SET(CPack_CMake_INCLUDED 1) -ENDIF(CPack_CMake_INCLUDED) +if(CPack_CMake_INCLUDED) + message(WARNING "CPack.cmake has already been included!!") +else() + set(CPack_CMake_INCLUDED 1) +endif() # Pick a configuration file -SET(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") -IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") - SET(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") -ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") -SET(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") -IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") - SET(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") -ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") +set(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") +if(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") + set(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") +endif() +set(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") +if(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") + set(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") +endif() # Backward compatibility # Include CPackComponent macros if it has not already been included before. include(CPackComponent) # Macro for setting values if a user did not overwrite them -MACRO(cpack_set_if_not_set name value) - IF(NOT DEFINED "${name}") - SET(${name} "${value}") - ENDIF(NOT DEFINED "${name}") -ENDMACRO(cpack_set_if_not_set) +macro(cpack_set_if_not_set name value) + if(NOT DEFINED "${name}") + set(${name} "${value}") + endif() +endmacro() -# Macro to encode variables for the configuration file +# cpack_encode_variables - Macro to encode variables for the configuration file # find any variable that starts with CPACK and create a variable # _CPACK_OTHER_VARIABLES_ that contains SET commands for # each cpack variable. _CPACK_OTHER_VARIABLES_ is then # used as an @ replacment in configure_file for the CPackConfig. -MACRO(cpack_encode_variables) - SET(_CPACK_OTHER_VARIABLES_) - GET_CMAKE_PROPERTY(res VARIABLES) - FOREACH(var ${res}) - IF("xxx${var}" MATCHES "xxxCPACK") - SET(_CPACK_OTHER_VARIABLES_ +macro(cpack_encode_variables) + set(_CPACK_OTHER_VARIABLES_) + get_cmake_property(res VARIABLES) + foreach(var ${res}) + if("xxx${var}" MATCHES "xxxCPACK") + set(_CPACK_OTHER_VARIABLES_ "${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")") - ENDIF("xxx${var}" MATCHES "xxxCPACK") - ENDFOREACH(var ${res}) -ENDMACRO(cpack_encode_variables) + endif() + endforeach() +endmacro() # Set the package name cpack_set_if_not_set(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}") @@ -297,27 +350,31 @@ cpack_set_if_not_set(CPACK_RESOURCE_FILE_WELCOME cpack_set_if_not_set(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}") -IF(CPACK_NSIS_MODIFY_PATH) - SET(CPACK_NSIS_MODIFY_PATH ON) -ENDIF(CPACK_NSIS_MODIFY_PATH) - -SET(__cpack_system_name ${CMAKE_SYSTEM_NAME}) -IF(${__cpack_system_name} MATCHES Windows) - IF(CMAKE_CL_64) - SET(__cpack_system_name win64) - ELSE(CMAKE_CL_64) - SET(__cpack_system_name win32) - ENDIF(CMAKE_CL_64) -ENDIF(${__cpack_system_name} MATCHES Windows) +if(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL) + set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON) +endif() + +if(CPACK_NSIS_MODIFY_PATH) + set(CPACK_NSIS_MODIFY_PATH ON) +endif() + +set(__cpack_system_name ${CMAKE_SYSTEM_NAME}) +if(${__cpack_system_name} MATCHES Windows) + if(CMAKE_CL_64) + set(__cpack_system_name win64) + else() + set(__cpack_system_name win32) + endif() +endif() cpack_set_if_not_set(CPACK_SYSTEM_NAME "${__cpack_system_name}") # Root dir: default value should be the string literal "$PROGRAMFILES" # for backwards compatibility. Projects may set this value to anything. if(CMAKE_CL_64) set(__cpack_root_default "$PROGRAMFILES64") -else(CMAKE_CL_64) +else() set(__cpack_root_default "$PROGRAMFILES") -endif(CMAKE_CL_64) +endif() cpack_set_if_not_set(CPACK_NSIS_INSTALL_ROOT "${__cpack_root_default}") # <project>-<major>.<minor>.<patch>-<release>-<platform>.<pkgtype> @@ -333,15 +390,15 @@ cpack_set_if_not_set(CPACK_PACKAGE_RELOCATABLE "true") # always force to exactly "true" or "false" for CPack.Info.plist.in: if(CPACK_PACKAGE_RELOCATABLE) set(CPACK_PACKAGE_RELOCATABLE "true") -else(CPACK_PACKAGE_RELOCATABLE) +else() set(CPACK_PACKAGE_RELOCATABLE "false") -endif(CPACK_PACKAGE_RELOCATABLE) +endif() macro(cpack_check_file_exists file description) if(NOT EXISTS "${file}") message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.") - endif(NOT EXISTS "${file}") -endmacro(cpack_check_file_exists) + endif() +endmacro() cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description") cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}" "license resource") @@ -351,9 +408,15 @@ cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}" "welcome resource") macro(cpack_optional_append _list _cond _item) if(${_cond}) set(${_list} ${${_list}} ${_item}) - endif(${_cond}) -endmacro(cpack_optional_append _list _cond _item) - + endif() +endmacro() + +##variable +# CPACK_BINARY_<GENNAME> - CPack generated options for binary generators. The +# CPack.cmake module generates (when CPACK_GENERATOR is not set) +# a set of CMake options (see CMake option command) which may then be used to +# select the CPack generator(s) to be used when launching the package target. +##end # Provide options to choose generators # we might check here if the required tools for the generates exist # and set the defaults according to the results @@ -361,27 +424,27 @@ if(NOT CPACK_GENERATOR) if(UNIX) if(CYGWIN) option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON) - else(CYGWIN) + else() if(APPLE) option(CPACK_BINARY_BUNDLE "Enable to build OSX bundles" OFF) option(CPACK_BINARY_DRAGNDROP "Enable to build OSX Drag And Drop package" OFF) option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" ON) option(CPACK_BINARY_OSXX11 "Enable to build OSX X11 packages" OFF) - else(APPLE) + else() option(CPACK_BINARY_TZ "Enable to build TZ packages" ON) - endif(APPLE) + endif() option(CPACK_BINARY_STGZ "Enable to build STGZ packages" ON) option(CPACK_BINARY_TGZ "Enable to build TGZ packages" ON) option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages" OFF) option(CPACK_BINARY_DEB "Enable to build Debian packages" OFF) option(CPACK_BINARY_RPM "Enable to build RPM packages" OFF) option(CPACK_BINARY_NSIS "Enable to build NSIS packages" OFF) - endif(CYGWIN) - else(UNIX) + endif() + else() option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON) option(CPACK_BINARY_ZIP "Enable to build ZIP packages" OFF) - endif(UNIX) - + endif() + cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_BUNDLE Bundle) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DRAGNDROP DragNDrop) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_PACKAGEMAKER PackageMaker) @@ -395,37 +458,37 @@ if(NOT CPACK_GENERATOR) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TBZ2 TBZ2) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TZ TZ) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_ZIP ZIP) - -endif(NOT CPACK_GENERATOR) + +endif() # Provide options to choose source generators if(NOT CPACK_SOURCE_GENERATOR) if(UNIX) if(CYGWIN) option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON) - else(CYGWIN) + else() option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON) option(CPACK_SOURCE_TGZ "Enable to build TGZ source packages" ON) option(CPACK_SOURCE_TZ "Enable to build TZ source packages" ON) option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" OFF) - endif(CYGWIN) - else(UNIX) + endif() + else() option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON) - endif(UNIX) + endif() cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_CYGWIN CygwinSource) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TGZ TGZ) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TBZ2 TBZ2) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TZ TZ) cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_ZIP ZIP) -endif(NOT CPACK_SOURCE_GENERATOR) +endif() # mark the above options as advanced mark_as_advanced(CPACK_BINARY_CYGWIN CPACK_BINARY_PACKAGEMAKER CPACK_BINARY_OSXX11 - CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 - CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ + CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 + CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ CPACK_BINARY_NSIS CPACK_BINARY_ZIP CPACK_BINARY_BUNDLE - CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ + CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ CPACK_SOURCE_TZ CPACK_SOURCE_ZIP CPACK_BINARY_DRAGNDROP) # Set some other variables @@ -435,16 +498,16 @@ cpack_set_if_not_set(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}") cpack_set_if_not_set(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}") # if the user has set CPACK_NSIS_DISPLAY_NAME remember it if(DEFINED CPACK_NSIS_DISPLAY_NAME) - SET(CPACK_NSIS_DISPLAY_NAME_SET TRUE) + set(CPACK_NSIS_DISPLAY_NAME_SET TRUE) endif() # if the user has set CPACK_NSIS_DISPLAY # explicitly, then use that as the default # value of CPACK_NSIS_PACKAGE_NAME instead -# of CPACK_PACKAGE_INSTALL_DIRECTORY +# of CPACK_PACKAGE_INSTALL_DIRECTORY cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") if(CPACK_NSIS_DISPLAY_NAME_SET) - string(REPLACE "\\" "\\\\" + string(REPLACE "\\" "\\\\" _NSIS_DISPLAY_NAME_TMP "${CPACK_NSIS_DISPLAY_NAME}") cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}") else() @@ -463,31 +526,31 @@ cpack_set_if_not_set(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}") cpack_set_if_not_set(CPACK_NSIS_INSTALLER_ICON_CODE "") cpack_set_if_not_set(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "") -IF(DEFINED CPACK_COMPONENTS_ALL) - IF(CPACK_MONOLITHIC_INSTALL) - MESSAGE("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.") - SET(CPACK_COMPONENTS_ALL) - ELSE(CPACK_MONOLITHIC_INSTALL) +if(DEFINED CPACK_COMPONENTS_ALL) + if(CPACK_MONOLITHIC_INSTALL) + message("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.") + set(CPACK_COMPONENTS_ALL) + else() # The user has provided the set of components to be installed as # part of a component-based installation; trust her. - SET(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE) - ENDIF(CPACK_MONOLITHIC_INSTALL) -ELSE(DEFINED CPACK_COMPONENTS_ALL) + set(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE) + endif() +else() # If the user has not specifically requested a monolithic installer # but has specified components in various "install" commands, tell # CPack about those components. - IF(NOT CPACK_MONOLITHIC_INSTALL) - GET_CMAKE_PROPERTY(CPACK_COMPONENTS_ALL COMPONENTS) - LIST(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN) - IF(CPACK_COMPONENTS_LEN EQUAL 1) + if(NOT CPACK_MONOLITHIC_INSTALL) + get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS) + list(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN) + if(CPACK_COMPONENTS_LEN EQUAL 1) # Only one component: this is not a component-based installation # (at least, it isn't a component-based installation, but may # become one later if the user uses the cpack_add_* commands). - SET(CPACK_COMPONENTS_ALL) - ENDIF(CPACK_COMPONENTS_LEN EQUAL 1) - SET(CPACK_COMPONENTS_LEN) - ENDIF(NOT CPACK_MONOLITHIC_INSTALL) -ENDIF(DEFINED CPACK_COMPONENTS_ALL) + set(CPACK_COMPONENTS_ALL) + endif() + set(CPACK_COMPONENTS_LEN) + endif() +endif() # CMake always generates a component named "Unspecified", which is # used to install everything that doesn't have an explicitly-provided @@ -507,13 +570,13 @@ cpack_set_if_not_set(CPACK_SOURCE_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source") cpack_set_if_not_set(CPACK_SOURCE_IGNORE_FILES "/CVS/;/\\\\\\\\.svn/;/\\\\\\\\.bzr/;/\\\\\\\\.hg/;/\\\\\\\\.git/;\\\\\\\\.swp$;\\\\\\\\.#;/#") -SET(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}") -SET(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}") -SET(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}") -SET(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}") -SET(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}") -SET(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}") -SET(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}") +set(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}") +set(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}") +set(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}") +set(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}") +set(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}") +set(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}") +set(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}") cpack_encode_variables() configure_file("${cpack_source_input_file}" |