summaryrefslogtreecommitdiffstats
path: root/config
diff options
context:
space:
mode:
Diffstat (limited to 'config')
-rw-r--r--config/cmake/H5pubconf.h.in4
-rw-r--r--config/craynv198
-rw-r--r--config/dec-flags150
-rw-r--r--config/hpux11.2396
-rw-r--r--config/ia64-linux-gnu144
-rw-r--r--config/nec-superux14.1178
-rw-r--r--config/sv1-cray199
-rw-r--r--config/x86_64-redstorm-linux-gnu162
8 files changed, 0 insertions, 1131 deletions
diff --git a/config/cmake/H5pubconf.h.in b/config/cmake/H5pubconf.h.in
index 8d7642e..9625ee3 100644
--- a/config/cmake/H5pubconf.h.in
+++ b/config/cmake/H5pubconf.h.in
@@ -43,10 +43,6 @@
writing. */
#cmakedefine H5_CLEAR_MEMORY @H5_CLEAR_MEMORY@
-/* Define if your system can handle converting denormalized floating-point
- values. */
-#cmakedefine H5_CONVERT_DENORMAL_FLOAT @H5_CONVERT_DENORMAL_FLOAT@
-
/* Define if C++ compiler recognizes offsetof */
#cmakedefine H5_CXX_HAVE_OFFSETOF @H5_CXX_HAVE_OFFSETOF@
diff --git a/config/craynv b/config/craynv
deleted file mode 100644
index 479d5c8..0000000
--- a/config/craynv
+++ /dev/null
@@ -1,198 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-# Disabling Dependency Tracking
-# ---------------------
-#
-# The Cray X1 machines that The HDF Group tests on seem to have trouble doing
-# dependency tracking (probably because they use Cray's C++ compiler,
-# which autoconf may not recognize). Until this is fixed by autoconf
-# or a user complains, disable dependency tracking on Crays.
-enable_dependency_tracking="no"
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it
-# requires for proper operation. If CC is unset then this script may
-# set it. If CC is unset by time this script completes then configure
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-# in order to distinguish between different compilers when
-# deciding which compiler command-line switches to use. This
-# variable is set based on the incoming value of $CC and is only
-# used within this file.
-
-if test "X-" = "X-$CC"; then
- CC=cc
- CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS library suitable for use with debugging
-# tools. Usually this list will exclude
-# optimization switches (like `-O') and include
-# switches that turn on symbolic debugging
-# support (like `-g').
-#
-# PROD_CFLAGS Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS library suitable for performance testing (like
-# `-pg'). This may or may not include debugging
-# or production flags.
-#
-# H5_CFLAGS Flags can be added to this variable which
-# might already be partially initialized. These
-# flags will always be passed to the compiler
-# and should include switches to turn on full
-# warnings. HDF5 attempts to be ANSI and Posix
-# compliant and employ good programming
-# practices resulting in few if any
-# warnings.
-#
-# Warning flags do not have to be added to H5_CFLAGS
-# variable if the compiler is the GNU gcc
-# compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS Flags added directly into this variable will
-# be propogated to the compiler wrapper scripts (h5cc,
-# h5c++, et cetera) in addition to being used to compile
-# the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler. You can try using `-v' or
-# `--version' to see if the compiler will print a version string. You
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
- gcc)
- H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- cc)
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS=""
- PROD_CPPFLAGS=
- PROFILE_CFLAGS=
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -ansi"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'. For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set the flag to indicate that converting denormalized floating-point
-# values doesn't work.
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$F9X"; then
- F9X=ftn
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
- # -Wl passes flags to the linker and -M# will ignore warnings with
- # number#. Warning 405 and 412 were stopping the executable from
- # being built.
- # The -em flag enables .mod files, which is what HDF5 builds.
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS -em"
- DEBUG_FCFLAGS="-g"
- PROD_FCFLAGS=""
- PROFILE_FCFLAGS=""
- f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
- CXX="CC"
- CXX_BASENAME=CC
-fi
-
-case $CXX_BASENAME in
- g++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CXXFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS"
- DEBUG_CXXFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS=""
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS=
- PROFILE_CPPFLAGS=
- ;;
-esac
-
diff --git a/config/dec-flags b/config/dec-flags
deleted file mode 100644
index 8f3fa1a..0000000
--- a/config/dec-flags
+++ /dev/null
@@ -1,150 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file should be sourced into configure if the compiler is a DEC
-# compiler. It is careful not to do anything if the compiler is not
-# DEC; otherwise `cc_flags_set' is set to `yes'
-#
-
-# Get the compiler version unless it's already known.
-#
-# cc_vendor: The compiler vendor: DEC
-# cc_version: Version number, like: V5.2-038
-#
-if test X = "X$cc_flags_set"; then
- cc_vendor=DEC
- cc_version="`$CC $CFLAGS $H5_CFLAGS -V 2>&1 |head -1`"
- case "$cc_version" in
- DEC*)
- cc_version="`echo $cc_version |\
- sed 's/.*DEC C \(V[0-9][-\.0-9]*\).*/\1/'`"
- ;;
- Compaq*)
- cc_version="`echo $cc_version |\
- sed 's/.*Compaq C \(V[0-9][-\.0-9]*\).*/\1/'`"
- ;;
- esac
-
- if test X != "$gcc_version"; then
- echo "compiler '$CC' is $cc_vendor-$cc_version"
- else
- cc_vendor=
- fi
-fi
-
-# Warn about old compilers that don't work right.
-case "$cc_vendor-$cc_version" in
- DEC-V5.2-038)
- cat <<EOF
- **
- ** This compiler may generate incorrect code when optimizations are
- ** enabled. Please upgrade to a newer version (we're not sure which
- ** version actually works) before reporting bugs to the HDF5 team.
- **
-EOF
- sleep 5
- ;;
-esac
-
-# Compiler flags
-case "$cc_vendor-$cc_version" in
- DEC-V5.*)
- # Production
- PROD_CFLAGS="-std -verbose -warnprotos -ieee -misalign -O4 -ansi_args -fp_reorder -readonly_strings -inline speed"
- PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS"
-
- # Debug
- DEBUG_CFLAGS="-g -std -verbose -warnprotos -ieee -misalign"
- DEBUG_CPPFLAGS=
-
- # Profile
- PROFILE_CFLAGS="-pg -std -verbose -warnprotos -ieee -misalign"
- PROFILE_CPPFLAGS=
-
- # Flags are set
- cc_flags_set=yes
- ;;
-
- DEC-V6.*)
- # Production
- PROD_CFLAGS="-c99 -verbose -warnprotos -ieee -misalign -O4 -fp_reorder -readonly_strings -inline speed"
- PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS"
-
- # Debug
- DEBUG_CFLAGS="-g -c99 -verbose -warnprotos -ieee -misalign"
- DEBUG_CPPFLAGS=
-
- # Profile
- PROFILE_CFLAGS="-pg -c99 -verbose -warnprotos -ieee -misalign"
- PROFILE_CPPFLAGS=
-
- # Flags are set
- cc_flags_set=yes
- ;;
-esac
-
-# If no flags were set then clear the compiler vendor and version info.
-if test X = "X$cc_flags_set"; then
- cc_vendor=
- cc_version=
-fi
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
- FC=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS -Olimit 2048 -std1"
- DEBUG_FCFLAGS="-Olimit 2048 -std1"
- PROD_FCFLAGS="-Olimit 2048 -std1"
- PROFILE_FCFLAGS="-Olimit 2048 -std1"
- f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
- CXX=cxx
- CXX_BASENAME=cxx
-fi
-
-
-case $CXX_BASENAME in
- g++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CXXFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS -tlocal -D__USE_STD_IOSTREAM"
- DEBUG_CXXFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
diff --git a/config/hpux11.23 b/config/hpux11.23
deleted file mode 100644
index 339cc84..0000000
--- a/config/hpux11.23
+++ /dev/null
@@ -1,96 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Default compiler is `cc'
-if test "X-" = "X-$CC"; then
- CC=cc
- CC_BASENAME=cc
-fi
-
-# Flags
-case "X-$CC" in
- X-gcc)
- H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O3"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -Ae -Wp,-H65536" #increase the size of macro definition table. For test/dtypes.c
- DEBUG_CFLAGS=-g
- DEBUG_CPPFLAGS="-Ae"
- PROD_CFLAGS=-O
- PROD_CPPFLAGS="-Ae"
- PROFILE_CFLAGS=
- PROFILE_CPPFLAGS="-Ae"
- ;;
-esac
-
-# The default Fortran 90 compiler
-
-if test "X$FC" = "X"; then
- FC=f90
-fi
-
-if test "X$f9x_flags_set" = "X"; then
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS -O"
- DEBUG_FCFLAGS="-O"
- PROD_FCFLAGS="-O"
- PROFILE_FCFLAGS="-O"
- f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
- CXX=aCC
- CXX_BASENAME=aCC
-fi
-
-case "X-$CXX" in
- X-aCC)
- # +Z for PIC
- H5_CXXFLAGS="$H5_CXXFLAGS +Z -D_INCLUDE_LONGLONG"
- H5_CFLAGS="$H5_CFLAGS -g +O2"
- DEBUG_CXXFLAGS=-g
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O -s"
- PROD_CPPFLAGS=
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS -D_INCLUDE_LONGLONG"
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CXXFLAGS=
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS=
- PROD_CPPFLAGS=
- PROFILE_CPPFLAGS=
- ;;
-esac
diff --git a/config/ia64-linux-gnu b/config/ia64-linux-gnu
deleted file mode 100644
index 9f1b262..0000000
--- a/config/ia64-linux-gnu
+++ /dev/null
@@ -1,144 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-# Use Intel C compiler by default (if it's available).
-# Use mpicc for parallel by default.
-if test "X$CC" = "X"; then
- if test "X-$enable_parallel" = "X-yes"; then
- CC=mpicc
- CC_BASENAME=mpicc
- elif which icc > /dev/null; then
- CC=icc
- CC_BASENAME=icc
- fi
-fi
-
-# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used.
-if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpicc; then
- RUNPARALLEL=${RUNPARALLEL="mpirun -np \$\${NPROCS:=6}"}
-fi
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-
-case $CC_BASENAME in
- ecc|icc)
- . $srcdir/config/intel-flags
- ;;
-
- gcc)
- . $srcdir/config/gnu-flags
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -ansi"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-# The default Fortran 90 compiler
-
-# Use Intel Fortran compiler by default.
-if test X-$enable_fortran = X-yes -a "X-$FC" = "X-"; then
- if test "X-$enable_parallel" = "X-yes"; then
- FC=mpif90
- else
- FC="ifort"
- fi
-fi
-
-case $FC in
- *efc|*ifort)
- # this is for efc v7. Older efc do not work with these.
- # -Vaxlib is for non-standard fortran calls like exit().
- MORE_FCFLAGS='-fpp -DDEC$=DEC_ -DMS$=MS_ -Vaxlib'
- H5_FCFLAGS="$H5_FCFLAGS $MORE_FCFLAGS"
- f9x_flags_set=yes
- ;;
-
- *)
- f9x_flags_set=yes
- ;;
-esac
-
-# The following is not right and need work.
-if test "X$f9x_flags_set" = "X"; then
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS"
- DEBUG_FCFLAGS=""
- PROD_FCFLAGS=""
- PROFILE_FCFLAGS=""
- f9x_flags_set=yes
-fi
-
-# The Default settings for C++
-# Intel changed C++ compiler's name from "icc" to "icpc" in version 8.1
-if test -z "$CXX"; then
- CXX=icpc
- CXX_BASENAME=icpc
-fi
-
-# A patch to make g++ getting the default settings.
-# CXX_BASENAME should have been set in configure.
-if test "X$CXX" = "Xg++"; then
- CXX_BASENAME=g++
-fi
-
-
-case $CXX_BASENAME in
- ecc|icc) # Intel compilers
- # Default to C99 standard.
- H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}"
- DEBUG_CXXFLAGS="-g -w2 -Wall"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="" #Default optimization O2 is used
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
- g++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CXXFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- # Default to C99 standard.
- H5_CXXFLAGS="${H5_CXXFLAGS:--std=c99}"
- DEBUG_CXXFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
diff --git a/config/nec-superux14.1 b/config/nec-superux14.1
deleted file mode 100644
index 05f898b..0000000
--- a/config/nec-superux14.1
+++ /dev/null
@@ -1,178 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-# [ak] created for a nec sx6 running superux with native compilers
-# [ak] -xint is neccessary because of src/H5FDmulti.c[H5Pset_fapl_multi]
-# [ak] integer division of unsigned longs for _memb_addr
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it
-# requires for proper operation. If CC is unset then this script may
-# set it. If CC is unset by time this script completes then configure
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-# in order to distinguish between different compilers when
-# deciding which compiler command-line switches to use. This
-# variable is set based on the incoming value of $CC and is only
-# used within this file.
-
-if test "X-" = "X-$CC"; then
- CC="sxc++ -Xa -size_t64 -xint -K c99"
- CC_BASENAME=sxc++
-fi
-# The default archiver is `sxar'
-AR=${AR:-sxar}
-RANLIB=${RANLIB:=":"}
-
-if test "X-" = "X-$CXX"; then
- CXX="sxc++ -size_t64 -xint -Kexceptions"
- CXX_BASENAME=sxc++
-fi
-
-if test "X-" = "X-$F9X"; then
- FC="sxf90 -size_t64 -ew "
- FC_BASENAME=sxf90
-fi
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS library suitable for use with debugging
-# tools. Usually this list will exclude
-# optimization switches (like `-O') and include
-# switches that turn on symbolic debugging
-# support (like `-g').
-#
-# PROD_CFLAGS Flags to pass to the compiler to create a
-# PROD_CPPFLAGS production version of the library. These
-# usualy exclude symbolic debugging switches
-# (like `-g') and include optimization switches
-# (like `-O').
-#
-# PROFILE_CFLAGS Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS library suitable for performance testing (like
-# `-pg'). This may or may not include debugging
-# or production flags.
-#
-# H5_CFLAGS Flags can be added to this variable which
-# might already be partially initialized. These
-# flags will always be passed to the compiler
-# and should include switches to turn on full
-# warnings. HDF5 attempts to be ANSI and Posix
-# compliant and employ good programming
-# practices resulting in few if any
-# warnings.
-#
-# Warning flags do not have to be added to H5_CFLAGS
-# variable if the compiler is the GNU gcc
-# compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS Flags added directly into this variable will
-# be propogated to the compiler wrapper scripts (h5cc,
-# h5c++, et cetera) in addition to being used to compile
-# the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler. You can try using `-v' or
-# `--version' to see if the compiler will print a version string. You
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
- cc)
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CFLAGS="-Cdebug -g -wall"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-Cnoopt"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-p"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS=""
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-p"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-case $CXX_BASENAME in
- c++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Tlocal"
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS"
- ;;
-esac
-
-case $FC_BASENAME in
- f90)
- H5_FCFLAGS="$F9XFLAGS"
- ;;
-
- *)
- H5_FCFLAGS="$F9XFLAGS"
- ;;
-esac
-
-# Overriding Configure Tests
-# --------------------------
-#
-ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=0}
-hdf5_cv_gettimeofday_tz=no
-# I have to add the follwoing two lines when -K c99 was used
-ac_cv_func_getrusage=no
-ac_cv_func_gethostname=no
-hdf5_cv_vsnprintf_works=no
-hdf5_cv_printf_ll=l
-hdf5_cv_system_scope_threads=no
-hdf5_cv_sw_ldouble_to_integer_works=no
-hdf5_cv_fp_to_ullong_right_maximum=no
-hdf5_cv_fp_to_ullong_right_maximum=no
-hdf5_cv_ldouble_to_uint_work=no
-hdf5_cv_ullong_to_fp_cast_works=yes
-hdf5_cv_ullong_to_ldouble_precision_works=no
-hdf5_cv_fp_to_integer_overflow_works=yes
-hdf5_cv_fp_to_ullong_accurate=no
-hdf5_cv_fp_to_ullong_right_maximum=no
-CONFIGURE_LIBS=/usr/lib/libi90sxe.a
-
-
diff --git a/config/sv1-cray b/config/sv1-cray
deleted file mode 100644
index 1bae48d..0000000
--- a/config/sv1-cray
+++ /dev/null
@@ -1,199 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it
-# requires for proper operation. If CC is unset then this script may
-# set it. If CC is unset by time this script completes then configure
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-# in order to distinguish between different compilers when
-# deciding which compiler command-line switches to use. This
-# variable is set based on the incoming value of $CC and is only
-# used within this file.
-
-if test "X-" = "X-$CC"; then
- CC=cc
- CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS library suitable for use with debugging
-# tools. Usually this list will exclude
-# optimization switches (like `-O') and include
-# switches that turn on symbolic debugging
-# support (like `-g').
-#
-# PROD_CFLAGS Flags to pass to the compiler to create a
-# PROD_CPPFLAGS production version of the library. These
-# usualy exclude symbolic debugging switches
-# (like `-g') and include optimization switches
-# (like `-O').
-#
-# PROFILE_CFLAGS Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS library suitable for performance testing (like
-# `-pg'). This may or may not include debugging
-# or production flags.
-#
-# H5_CFLAGS Flags can be added to this variable which
-# might already be partially initialized. These
-# flags will always be passed to the compiler
-# and should include switches to turn on full
-# warnings. HDF5 attempts to be ANSI and Posix
-# compliant and employ good programming
-# practices resulting in few if any
-# warnings.
-#
-# Warning flags do not have to be added to H5_CFLAGS
-# variable if the compiler is the GNU gcc
-# compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS Flags added directly into this variable will
-# be propogated to the compiler wrapper scripts (h5cc,
-# h5c++, et cetera) in addition to being used to compile
-# the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler. You can try using `-v' or
-# `--version' to see if the compiler will print a version string. You
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
- gcc)
- H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- cc)
- H5_CFLAGS="$H5_CFLAGS"
- DEBUG_CFLAGS="-g -h zero"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -ansi"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'. For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set the flag to indicate that converting denormalized floating-point
-# values doesn't work.
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
- FC=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
- F9XSUFFIXFLAG=""
- FSEARCH_DIRS=""
- H5_FCFLAGS="$H5_FCFLAGS -dp"
- DEBUG_FCFLAGS="-dp"
- PROD_FCFLAGS="-dp"
- PROFILE_FCFLAGS="-dp"
- f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
- CXX="CC"
- CXX_BASENAME=CC
-fi
-
-
-case $CXX_BASENAME in
- g++)
- H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
- DEBUG_CXXFLAGS="-g -fverbose-asm"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-
- *)
- H5_CXXFLAGS="$H5_CXXFLAGS -h instantiate=used"
- DEBUG_CXXFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CXXFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CXXFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
diff --git a/config/x86_64-redstorm-linux-gnu b/config/x86_64-redstorm-linux-gnu
deleted file mode 100644
index f796052..0000000
--- a/config/x86_64-redstorm-linux-gnu
+++ /dev/null
@@ -1,162 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# This is for the ASCI RED STORM machine
-
-# Define RUNPARALLEL and RUNSERIAL if parallel mode is enabled or a parallel
-# compiler is used.
-if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpicc; then
- RUNSERIAL=${RUNSERIAL:-"yod -sz 1"}
- RUNPARALLEL=${RUNPARALLEL:-"yod -sz 3"}
- # Disable stream-vfd option. It does not work in parallel mode.
- enable_stream_vfd="${enable_stream_vfd:-no}"
- # Turn off shared lib option. It does not work in parallel mode.
- enable_shared="${enable_shared:-no}"
-fi
-
-H5_CFLAGS="$H5_CFLAGS -DRED_STORM"
-
-# What compiler flags should be used for code development?
-DEBUG_CFLAGS=-g
-DEBUG_CPPFLAGS=
-
-# What compiler flags should be used for building a production
-# library?
-PROD_CFLAGS=-O
-PROD_CPPFLAGS=
-
-# What compiler flags enable code profiling?
-PROFILE_CFLAGS=-pg
-PROFILE_CPPFLAGS=
-
-# Set this to the width required by printf() to print type `long
-# long'. For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Cache the sizeof of the following types to save configure time.
-# These are verified in test/tconfig in case they change.
-ac_cv_type_char=${ac_cv_type_char=yes}
-ac_cv_sizeof_char=${ac_cv_sizeof_char='1'}
-ac_cv_type_short=${ac_cv_type_short=yes}
-ac_cv_sizeof_short=${ac_cv_sizeof_short='2'}
-ac_cv_type_int=${ac_cv_type_int=yes}
-ac_cv_sizeof_int=${ac_cv_sizeof_int='4'}
-ac_cv_type_long=${ac_cv_type_long=yes}
-ac_cv_sizeof_long=${ac_cv_sizeof_long='8'}
-ac_cv_type_float=${ac_cv_type_float=yes}
-ac_cv_sizeof_float=${ac_cv_sizeof_float='4'}
-ac_cv_type_double=${ac_cv_type_double=yes}
-ac_cv_sizeof_double=${ac_cv_sizeof_double='8'}
-ac_cv_type_long_double=${ac_cv_type_long_double=yes}
-# no cache for long double which varies in size in different compilers.
-# gcc defines it as 12 bytes but pgcc defines it as 8 bytes.
-#ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double='8'}
-ac_cv_type_long_long=${ac_cv_type_long_long=yes}
-ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long='8'}
-ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t='8'}
-ac_cv_type_ssize_t=${ac_cv_type_ssize_t=yes}
-ac_cv_sizeof_ssize_t=${ac_cv_sizeof_ssize_t='8'}
-ac_cv_type_off_t=${ac_cv_type_off_t=yes}
-ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t='8'}
-
-# Hard set sizeof of the following types to 0 because they are not supported.
-#ac_cv_type___int64=${ac_cv_type___int64=no}
-#ac_cv_sizeof___int64=${ac_cv_sizeof___int64='0'}
-
-# Hard set malloc of zero bytes to no because it does not work.
-hdf5_cv_malloc_works=${hdf5_cv_malloc_works='no'}
-
-# Cache the sizeof of the following types to save configure time.
-# These are verified in test/tconfig in case they change.
-ac_cv_type_int8_t=${ac_cv_type_int8_t=yes}
-ac_cv_type_int16_t=${ac_cv_type_int16_t=yes}
-ac_cv_type_int32_t=${ac_cv_type_int32_t=yes}
-ac_cv_type_int64_t=${ac_cv_type_int64_t=yes}
-ac_cv_type_uint8_t=${ac_cv_type_uint8_t=yes}
-ac_cv_type_uint16_t=${ac_cv_type_uint16_t=yes}
-ac_cv_type_uint32_t=${ac_cv_type_uint32_t=yes}
-ac_cv_type_uint64_t=${ac_cv_type_uint64_t=yes}
-ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='1'}
-ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='2'}
-ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='4'}
-ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='8'}
-ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='1'}
-ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='2'}
-ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='4'}
-ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='8'}
-
-# Cache the sizeof of the following types to save configure time.
-# These are verified in test/tconfig in case they change.
-ac_cv_type_int_least8_t=${ac_cv_type_int_least8_t=yes}
-ac_cv_type_int_least16_t=${ac_cv_type_int_least16_t=yes}
-ac_cv_type_int_least32_t=${ac_cv_type_int_least32_t=yes}
-ac_cv_type_int_least64_t=${ac_cv_type_int_least64_t=yes}
-ac_cv_type_uint_least8_t=${ac_cv_type_uint_least8_t=yes}
-ac_cv_type_uint_least16_t=${ac_cv_type_uint_least16_t=yes}
-ac_cv_type_uint_least32_t=${ac_cv_type_uint_least32_t=yes}
-ac_cv_type_uint_least64_t=${ac_cv_type_uint_least64_t=yes}
-ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='1'}
-ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='2'}
-ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='4'}
-ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='8'}
-ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='1'}
-ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='2'}
-ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='4'}
-ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='8'}
-
-# Cache the sizeof of the following types to save configure time.
-# These are verified in test/tconfig in case they change.
-ac_cv_type_int_fast8_t=${ac_cv_type_int_fast8_t=yes}
-ac_cv_type_int_fast16_t=${ac_cv_type_int_fast16_t=yes}
-ac_cv_type_int_fast32_t=${ac_cv_type_int_fast32_t=yes}
-ac_cv_type_int_fast64_t=${ac_cv_type_int_fast64_t=yes}
-ac_cv_type_uint_fast8_t=${ac_cv_type_uint_fast8_t=yes}
-ac_cv_type_uint_fast16_t=${ac_cv_type_uint_fast16_t=yes}
-ac_cv_type_uint_fast32_t=${ac_cv_type_uint_fast32_t=yes}
-ac_cv_type_uint_fast64_t=${ac_cv_type_uint_fast64_t=yes}
-ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='1'}
-ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='8'}
-ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='8'}
-ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='8'}
-ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='1'}
-ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='8'}
-ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='8'}
-ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='8'}
-
-hdf5_cv_system_scope_threads=${hdf5_cv_system_scope_threads="no"}
-
-# Hard set MPI_File_set_size() working for files over 2GB to yes
-hdf5_cv_mpi_file_set_size_big=${hdf5_cv_mpi_file_set_size_big='yes'}
-
-# Hard set variables for v1.7 and higher.
-# Set gettimeofday_tz to yes.
-hdf5_cv_gettimeofday_tz=${hdf5_cv_gettimeofday_tz='yes'}
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-hdf5_cv_fp_to_ullong_right_maximum=${hdf5_cv_fp_to_ullong_right_maximum='yes'}
-hdf5_cv_ldouble_to_uint_works=${hdf5_cv_ldouble_to_uint_works='yes'}
-hdf5_cv_sw_ldouble_to_integer_works=${hdf5_cv_sw_ldouble_to_integer_works='yes'}
-hdf5_cv_ullong_to_fp_cast_works=${hdf5_cv_ullong_to_fp_cast_works='yes'}
-hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_works='yes'}
-hdf5_cv_vsnprintf_works=${hdf5_cv_vsnprintf_works='yes'}
-hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'}