diff options
Diffstat (limited to 'config')
92 files changed, 4155 insertions, 1772 deletions
diff --git a/config/apple b/config/apple index 0b15dfe..aba48d1 100644 --- a/config/apple +++ b/config/apple @@ -49,6 +49,7 @@ fi # Figure out compiler flags . $srcdir/config/gnu-flags +. $srcdir/config/clang-flags # temp patch: if GCC 4.2.1 is used in Lion or Mountain Lion systems, do not # use -O option as it causes failures in test/dt_arith. case "$host_os" in @@ -155,11 +156,13 @@ esac # get c++ version info case $CXX in clang++) + . $srcdir/config/clang-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'Apple' | sed 's/(.*//'` ;; *g++*) + . $srcdir/config/gnu-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'GCC' | sed 's/.*\((GCC) [-a-z0-9\. ]*.*\)/\1/'` ;; diff --git a/config/clang-cxxflags b/config/clang-cxxflags new file mode 100644 index 0000000..edd62e7 --- /dev/null +++ b/config/clang-cxxflags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang clang++ compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cxx_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang++ +# unless a compiler version is already known +# +# cxx_vendor: The compiler name: clang++ +# cxx_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cxx_flags_set"; then + # clang++ -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="clang" + else + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cxx_version"; then + + # Get the compiler version numbers + cxx_vers_major=`echo $cxx_version | cut -f1 -d.` + cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` + cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` + test -n "$cxx_vers_major" || cxx_vers_major=0 + test -n "$cxx_vers_minor" || cxx_vers_minor=0 + test -n "$cxx_vers_patch" || cxx_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cxx_vendor" -o "X-Apple LLVM" = "X-$cxx_vendor"; then + echo "compiler '$CXX' is $cxx_vendor-$cxx_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CXXFLAGS="$H5_CXXFLAGS -std=c++11" + ;; + esac + + H5_CXXFLAGS="$H5_CXXFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CXXFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CXXFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CXXFLAGS= + SYMBOLS_CXXFLAGS="-g -fno-omit-frame-pointer" + + ############# + # Profiling # + ############# + + PROFILE_CXXFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CXXFLAGS="-O3" + DEBUG_OPT_CXXFLAGS="-g" + NO_OPT_CXXFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CXXFLAGS="$H5_CXXFLAGS $(load_clang_arguments general)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cxx_flags_set=yes +fi + +# Clear cxx info if no flags set +if test "X$cxx_flags_set" = "X"; then + cxx_vendor= + cxx_version= +fi + diff --git a/config/clang-flags b/config/clang-flags new file mode 100644 index 0000000..b4f5e2e --- /dev/null +++ b/config/clang-flags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cc_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang +# unless a compiler version is already known +# +# cc_vendor: The compiler name: clang +# cc_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cc_flags_set"; then + # clang -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="clang" + else + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cc_version"; then + + # Get the compiler version numbers + cc_vers_major=`echo $cc_version | cut -f1 -d.` + cc_vers_minor=`echo $cc_version | cut -f2 -d.` + cc_vers_patch=`echo $cc_version | cut -f3 -d.` + test -n "$cc_vers_major" || cc_vers_major=0 + test -n "$cc_vers_minor" || cc_vers_minor=0 + test -n "$cc_vers_patch" || cc_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cc_vendor" -o "X-Apple LLVM" = "X-$cc_vendor"; then + echo "compiler '$CC' is $cc_vendor-$cc_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CFLAGS="$H5_CFLAGS -std=c99" + ;; + esac + + H5_CFLAGS="$H5_CFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CFLAGS= + SYMBOLS_CFLAGS="-g" + + ############# + # Profiling # + ############# + + PROFILE_CFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CFLAGS="-O3" + DEBUG_OPT_CFLAGS="-g" + NO_OPT_CFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CFLAGS="$H5_CFLAGS $(load_clang_arguments general)" + H5_ECFLAGS="$H5_ECFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cc_flags_set=yes +fi + +# Clear cc info if no flags set +if test "X$cc_flags_set" = "X"; then + cc_vendor= + cc_version= +fi + diff --git a/config/clang-warnings/developer-general b/config/clang-warnings/developer-general new file mode 100644 index 0000000..74d8404 --- /dev/null +++ b/config/clang-warnings/developer-general @@ -0,0 +1,4 @@ +-Wformat-nonliteral +-Wmissing-noreturn +-Wsometimes-uninitialized +-Wswitch-enum diff --git a/config/clang-warnings/error-general b/config/clang-warnings/error-general new file mode 100644 index 0000000..883dff7 --- /dev/null +++ b/config/clang-warnings/error-general @@ -0,0 +1,80 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +-Werror=bad-function-cast +-Werror=implicit-function-declaration +-Werror=incompatible-pointer-types +-Werror=missing-declarations +-Werror=packed +-Werror=shadow +-Werror=switch +# +# NOTE: Following files are not compatible with incompatible-pointer-types as errors +# src/H5Dchunk.c,src/H5Dint.c,src/H5Gint.c,src/H5HFcache.c,src/H5I.c,src/H5T.c +-Wno-error=incompatible-pointer-types-discards-qualifiers +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDdirect.c,H5FDmpio.c,H5FDros3.c, +# -Werror=unused-function +# +-Wunused-function +# +# H5FDdrvr_module.h +# -Werror=unused-variable +# +-Wunused-variable +# +# H5VLpassthru.c +# -Werror=unused-parameter +# +-Wunused-parameter +# +# +# +# NOTE: Tools files are not compatible with these warnings as errors +# lib/h5tools.c +# -Werror=cast-align +# +-Wcast-align +# +# lib/h5tools_utils.c +# -Werror=unused-parameter +# +# +# NOTE: JNI files are not compatible with these warnings as errors +# jni/h5pDCPLImp.c,jni/nativeData.c,jni/h5util.c,jni/h5rImp.c +# jni/h5sImp.c,jni/h5tImp.c +# -Werror=cast-align +# jni/h5util.c +# -Werror=format(-overflow) +# +-Wformat +# +# +#Examples and tests do not use the same set of extensive warning flags as libraries +# Here is a list of tests and examples that have issues with the stricter warnings as error +# +# NOTE: Test files are not compatible with these warnings as errors +# thread_id.c, +# -Werror=unused-function +# dsets.c +# -Werror=unused-parameter +# +# +# NOTE: Examples files are not compatible with these warnings as errors +# h5_vds-eiger.c,h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c,h5_vds-percival-unlim-maxmin.c +# h5_vds-percival.c,h5_read.c,h5_rdwt.c,h5_mount.c,h5_extend.c,h5_extend_write.c +# h5_write.c,h5_vds-simpleIO.c,h5_ref2reg_deprec.c,h5_crtgrp.c,h5_select.c +# h5_vds-percival-unlim.c,h5_crtatt.c,h5_group.c,h5_attribute.c,h5_crtdat.c +# h5_reference_deprec.c +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=strict-prototypes +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=old-style-definition +# h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c, +# -Werror=unused-variable +# h5_elink_unix2win.c,h5_extlink.c,h5_attribute.c +# -Werror=unused-parameter + diff --git a/config/clang-warnings/general b/config/clang-warnings/general new file mode 100644 index 0000000..f0c9b93 --- /dev/null +++ b/config/clang-warnings/general @@ -0,0 +1,26 @@ +# general clang warnings flags +-Wall +-Warray-bounds +-Wcast-qual +-Wconversion +-Wdouble-promotion +-Wextra +-Wformat=2 +-Wframe-larger-than=16384 +-Wimplicit-fallthrough +# +# NOTE: Due to the divergence in the C and C++, we're dropping support for +# compiling the C library with a C++ compiler and dropping the -Wc++-compat +# warning. +# +-Wno-c++-compat +# +# NOTE: Disable the -Wformat-nonliteral from -Wformat=2 here and re-add +# it to the developer flags. +# +-Wno-format-nonliteral +-Wnull-dereference +-Wunused-const-variable +-Wwrite-strings +-Wpedantic +-Wvolatile-register-var diff --git a/config/clang-warnings/no-developer-general b/config/clang-warnings/no-developer-general new file mode 100644 index 0000000..2bf1703 --- /dev/null +++ b/config/clang-warnings/no-developer-general @@ -0,0 +1 @@ +-Wno-missing-noreturn diff --git a/config/cmake/CTestCustom.cmake b/config/cmake/CTestCustom.cmake index 7ee5737..534f139 100644 --- a/config/cmake/CTestCustom.cmake +++ b/config/cmake/CTestCustom.cmake @@ -18,19 +18,18 @@ set (CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE 50000) set (CTEST_CUSTOM_WARNING_EXCEPTION ${CTEST_CUSTOM_WARNING_EXCEPTION} -# "H5detect.c.[0-9]+.[ \t]*:[ \t]*warning C4090:" -# "H5detect.c.[0-9]+.[ \t]*:[ \t]*warning:[ \t]*passing argument" -# "H5detect.c[0-9 \t:]*warning:[ \t]*passing argument" -# "note.*expected.*void.*but argument is of type.*volatile" -# "H5Tconv.c[0-9 \t:]*warning:[ \t]*comparison is always false due to limited range of data type" -# "H5Ztrans.c.[0-9]+.[ \t]*:[ \t]*warning C4244" -# "SZIP.src.*:[ \t]*warning" + "note.*expected.*void.*but argument is of type.*volatile" + "src.ZLIB.*:[ \t]*warning" + "warning LNK4197:.*ZLIB-prefix" + "src.SZIP.*:[ \t]*warning" # "POSIX name for this item is deprecated" "disabling jobserver mode" "config.cmake.xlatefile.c" -# "warning.*implicit declaration of function" -# "note: expanded from macro" -# "fpp:[ \t]*warning:[ \t]*cannot remove H5_DEBUG_API - not a predefined macro" + "warning.*unknown pragma" + "warning.*unrecognized .pragma" + "note: expanded from macro" + # HDDFFV-11074 + "This directive is not standard" ) set (CTEST_CUSTOM_MEMCHECK_IGNORE @@ -69,26 +68,6 @@ set (CTEST_CUSTOM_MEMCHECK_IGNORE HL_FORTRAN_f90_ex-clear-objects ######### tools/h5clear ######### H5CLEAR-clearall-objects - H5CLEAR-copy_h5clear_fsm_persist_equal.h5 - H5CLEAR-copy_h5clear_fsm_persist_greater.h5 - H5CLEAR-copy_h5clear_fsm_persist_less.h5 - H5CLEAR-copy_h5clear_fsm_persist_noclose.h5 - H5CLEAR-copy_h5clear_fsm_persist_user_equal.h5 - H5CLEAR-copy_h5clear_fsm_persist_user_greater.h5 - H5CLEAR-copy_h5clear_fsm_persist_user_less.h5 - H5CLEAR-copy_h5clear_log_v3.h5 - H5CLEAR-copy_h5clear_mdc_image.h5 - H5CLEAR-copy_h5clear_sec2_v0.h5 - H5CLEAR-copy_h5clear_sec2_v2.h5 - H5CLEAR-copy_h5clear_sec2_v3.h5 - H5CLEAR-copy_h5clear_status_noclear.h5 - H5CLEAR-copy_latest_h5clear_log_v3.h5 - H5CLEAR-copy_latest_h5clear_sec2_v3.h5 - H5CLEAR-copy_mod_h5clear_mdc_image.h5 - H5CLEAR-copy_mod_h5clr_mdc_image2.h5 - H5CLEAR-copy_orig_h5clear_sec2_v0.h5 - H5CLEAR-copy_orig_h5clear_sec2_v2.h5 - H5CLEAR-copy_orig_h5clear_sec2_v3.h5 H5CLEAR-h5clear_gentest # does not close ids by design ######### tools/h5copy ######### H5COPY-clearall-objects @@ -156,8 +135,8 @@ set (CTEST_CUSTOM_MEMCHECK_IGNORE H5REPACK-bug1814-clear-objects H5REPACK-HDFFV-5932-clear-objects H5REPACK-HDFFV-7840-clear-objects - H5REPACK_META-meta_long_N-clear-objects - H5REPACK_META-meta_short_N-clear-objects + H5REPACK_META-meta_long-clear-objects + H5REPACK_META-meta_short-clear-objects H5REPACK_STAT-GS_AGGR-clear-objects H5REPACK_STAT-S_AGGR-clear-objects H5REPACK_STAT-SP_NONE-clear-objects diff --git a/config/cmake/CTestScript.cmake b/config/cmake/CTestScript.cmake index e914c4d..5478862 100755 --- a/config/cmake/CTestScript.cmake +++ b/config/cmake/CTestScript.cmake @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) ######################################################## # For any comments please contact cdashhelp@hdfgroup.org # diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake index ab1fa89..ab121e9 100644 --- a/config/cmake/ConfigureChecks.cmake +++ b/config/cmake/ConfigureChecks.cmake @@ -61,6 +61,31 @@ if (HDF5_ENABLE_CODESTACK) endif () MARK_AS_ADVANCED (HDF5_ENABLE_CODESTACK) +# ---------------------------------------------------------------------- +# Check if they would like to use file locking by default +#----------------------------------------------------------------------------- +option (HDF5_USE_FILE_LOCKING "Use file locking by default (mainly for SWMR)" ON) +if (HDF5_USE_FILE_LOCKING) + set (${HDF_PREFIX}_USE_FILE_LOCKING 1) +endif () + +# ---------------------------------------------------------------------- +# Check if they would like to ignore file locks when disabled on a file system +#----------------------------------------------------------------------------- +option (HDF5_IGNORE_DISABLED_FILE_LOCKS "Ignore file locks when disabled on file system" ON) +if (HDF5_IGNORE_DISABLED_FILE_LOCKS) + set (${HDF_PREFIX}_IGNORE_DISABLED_FILE_LOCKS 1) +endif () + +# Set the libhdf5.settings file variable +if (HDF5_IGNORE_DISABLED_FILE_LOCKS AND HDF5_USE_FILE_LOCKING) + set (HDF5_FILE_LOCKING_SETTING "best-effort") +elseif (HDF5_IGNORE_DISABLED_FILE_LOCKS) + set (HDF5_FILE_LOCKING_SETTING "yes") +else () + set (HDF5_FILE_LOCKING_SETTING "no") +endif () + #----------------------------------------------------------------------------- # Are we going to use HSIZE_T #----------------------------------------------------------------------------- @@ -160,10 +185,6 @@ endif () #----------------------------------------------------------------------------- option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF) if (HDF5_ENABLE_ROS3_VFD) - # CMake version 3.13 fixed FindCURL module - if(CMAKE_VERSION VERSION_LESS "3.13.0" AND WIN32) - MESSAGE(FATAL_ERROR "Windows builds for this option requires a minimum of CMake 3.13") - endif () find_package(CURL REQUIRED) find_package(OpenSSL REQUIRED) if (${CURL_FOUND} AND ${OPENSSL_FOUND}) @@ -175,6 +196,23 @@ option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF) endif () endif () +# ---------------------------------------------------------------------- +# Check whether we can build the Mirror VFD +# Header-check flags set in config/cmake_ext_mod/ConfigureChecks.cmake +# ---------------------------------------------------------------------- +option (HDF5_ENABLE_MIRROR_VFD "Build the Mirror Virtual File Driver" OFF) +if (H5FD_ENABLE_MIRROR_VFD) + if ( ${HDF_PREFIX}_HAVE_NETINET_IN_H AND + ${HDF_PREFIX}_HAVE_NETDB_H AND + ${HDF_PREFIX}_HAVE_ARPA_INET_H AND + ${HDF_PREFIX}_HAVE_SYS_SOCKET_H AND + ${HDF_PREFIX}_HAVE_FORK) + set (${HDF_PREFIX}_HAVE_MIRROR_VFD 1) + else() + message(STATUS "The socket-based Mirror VFD was requested but cannot be built. System prerequisites are not met.") + endif() +endif() + #----------------------------------------------------------------------------- # Check if C has __float128 extension #----------------------------------------------------------------------------- diff --git a/config/cmake/H5pubconf.h.in b/config/cmake/H5pubconf.h.in index 6cbfd29..f66f529 100644 --- a/config/cmake/H5pubconf.h.in +++ b/config/cmake/H5pubconf.h.in @@ -104,6 +104,9 @@ /* Define if the compiler understands the __func__ keyword */ #cmakedefine H5_HAVE_C99_FUNC @H5_HAVE_C99_FUNC@ +/* Define to 1 if you have the <arpa/inet.h> header file. */ +#cmakedefine H5_HAVE_ARPA_INET_H @H5_HAVE_ARPA_INET_H@ + /* Define to 1 if you have the `clock_gettime' function. */ #cmakedefine H5_HAVE_CLOCK_GETTIME @H5_HAVE_CLOCK_GETTIME@ @@ -264,12 +267,12 @@ /* Define to 1 if you have the `lstat' function. */ #cmakedefine H5_HAVE_LSTAT @H5_HAVE_LSTAT@ -/* Define to 1 if you have the <mach/mach_time.h> header file. */ -#cmakedefine H5_HAVE_MACH_MACH_TIME_H @H5_HAVE_MACH_MACH_TIME_H@ - /* Define to 1 if you have the <memory.h> header file. */ #cmakedefine H5_HAVE_MEMORY_H @H5_HAVE_MEMORY_H@ +/* Define if we can build the Mirror VFD */ +#cmakedefine H5_HAVE_MIRROR_VFD @H5_HAVE_MIRROR_VFD@ + /* Define if we have MPE support */ #cmakedefine H5_HAVE_MPE @H5_HAVE_MPE@ @@ -282,6 +285,12 @@ /* Define if MPI_Info_c2f and MPI_Info_f2c exists */ #cmakedefine H5_HAVE_MPI_MULTI_LANG_Info @H5_HAVE_MPI_MULTI_LANG_Info@ +/* Define to 1 if you have the <netdb.h> header file. */ +#cmakedefine H5_HAVE_NETDB_H @H5_HAVE_NETDB_H@ + +/* Define to 1 if you have the <netinet/in.h> header file. */ +#cmakedefine H5_HAVE_NETINET_IN_H @H5_HAVE_NETINET_IN_H@ + /* Define to 1 if you have the <openssl/evp.h> header file. */ #cmakedefine H5_HAVE_OPENSSL_EVP_H @H5_HAVE_OPENSSL_EVP_H@ @@ -409,9 +418,6 @@ /* Define to 1 if you have the <sys/stat.h> header file. */ #cmakedefine H5_HAVE_SYS_STAT_H @H5_HAVE_SYS_STAT_H@ -/* Define to 1 if you have the <sys/timeb.h> header file. */ -#cmakedefine H5_HAVE_SYS_TIMEB_H @H5_HAVE_SYS_TIMEB_H@ - /* Define to 1 if you have the <sys/time.h> header file. */ #cmakedefine H5_HAVE_SYS_TIME_H @H5_HAVE_SYS_TIME_H@ @@ -480,6 +486,9 @@ /* Define if the compiler understands __inline__ */ #cmakedefine H5_HAVE___INLINE__ @H5_HAVE___INLINE__@ +/* Define if the library will ignore file locks when disabled */ +#cmakedefine H5_IGNORE_DISABLED_FILE_LOCKS @H5_IGNORE_DISABLED_FILE_LOCKS@ + /* Define if the high-level library headers should be included in hdf5.h */ #cmakedefine H5_INCLUDE_HL @H5_INCLUDE_HL@ @@ -714,6 +723,9 @@ /* Define using v1.10 public API symbols by default */ #cmakedefine H5_USE_110_API_DEFAULT @H5_USE_110_API_DEFAULT@ +/* Define if the library will use file locking */ +#cmakedefine H5_USE_FILE_LOCKING @H5_USE_FILE_LOCKING@ + /* Define if a memory checking tool will be used on the library, to cause library to be very picky about memory operations and also disable the internal free list manager code. */ diff --git a/config/cmake/HDF5UseFortran.cmake b/config/cmake/HDF5UseFortran.cmake index 2d3d371..4350b7a 100644 --- a/config/cmake/HDF5UseFortran.cmake +++ b/config/cmake/HDF5UseFortran.cmake @@ -19,6 +19,24 @@ enable_language (Fortran) set (HDF_PREFIX "H5") include (CheckFortranFunctionExists) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + include (CheckFortranSourceRuns) + include (CheckFortranSourceCompiles) +endif () + +# Read source line beginning at the line matching Input:"START" and ending at the line matching Input:"END" +macro (READ_SOURCE SOURCE_START SOURCE_END RETURN_VAR) + file (READ "${HDF5_SOURCE_DIR}/m4/aclocal_fc.f90" SOURCE_MASTER) + string (REGEX MATCH "${SOURCE_START}[\\\t\\\n\\\r[].+]*${SOURCE_END}" SOURCE_CODE ${SOURCE_MASTER}) + set (RETURN_VAR "${SOURCE_CODE}") +endmacro () + +set (RUN_OUTPUT_PATH_DEFAULT ${CMAKE_BINARY_DIR}) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + if (HDF5_REQUIRED_LIBRARIES) + set (CMAKE_REQUIRED_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}") + endif () +else () # The provided CMake Fortran macros don't provide a general compile/run function # so this one is used. #----------------------------------------------------------------------------- @@ -55,22 +73,16 @@ macro (FORTRAN_RUN FUNCTION_NAME SOURCE_CODE RUN_RESULT_VAR1 COMPILE_RESULT_VAR1 set(${RETURN_VAR} ${COMPILE_RESULT_VAR}) endif () endmacro () - -# Read source line beginning at the line matching Input:"START" and ending at the line matching Input:"END" -macro (READ_SOURCE SOURCE_START SOURCE_END RETURN_VAR) - file (READ "${HDF5_SOURCE_DIR}/m4/aclocal_fc.f90" SOURCE_MASTER) - string (REGEX MATCH "${SOURCE_START}[\\\t\\\n\\\r[].+]*${SOURCE_END}" SOURCE_CODE ${SOURCE_MASTER}) - set (RETURN_VAR "${SOURCE_CODE}") -endmacro () - +endif () #----------------------------------------------------------------------------- # Check to see C_LONG_DOUBLE is available READ_SOURCE("PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" "END PROGRAM PROG_FC_HAVE_C_LONG_DOUBLE" SOURCE_CODE) -CHECK_FORTRAN_FEATURE(c_long_double - "${SOURCE_CODE}" - FORTRAN_HAVE_C_LONG_DOUBLE -) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_compiles (${SOURCE_CODE} FORTRAN_HAVE_C_LONG_DOUBLE SRC_EXT f90) +else () + CHECK_FORTRAN_FEATURE(c_long_double "${SOURCE_CODE}" FORTRAN_HAVE_C_LONG_DOUBLE) +endif () if (${FORTRAN_HAVE_C_LONG_DOUBLE}) set (${HDF_PREFIX}_FORTRAN_HAVE_C_LONG_DOUBLE 1) @@ -81,10 +93,11 @@ endif () # Check to see C_LONG_DOUBLE is different from C_DOUBLE READ_SOURCE("MODULE type_mod" "END PROGRAM PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE" SOURCE_CODE) -CHECK_FORTRAN_FEATURE(c_long_double - "${SOURCE_CODE}" - FORTRAN_C_LONG_DOUBLE_IS_UNIQUE -) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_compiles (${SOURCE_CODE} FORTRAN_C_LONG_DOUBLE_IS_UNIQUE SRC_EXT f90) +else () + CHECK_FORTRAN_FEATURE(c_long_double "${SOURCE_CODE}" FORTRAN_C_LONG_DOUBLE_IS_UNIQUE) +endif () if (${FORTRAN_C_LONG_DOUBLE_IS_UNIQUE}) set (${HDF_PREFIX}_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 1) else () @@ -108,13 +121,80 @@ endif () # Determine the available KINDs for REALs and INTEGERs #----------------------------------------------------------------------------- -READ_SOURCE ("PROGRAM FC_AVAIL_KINDS" "END PROGRAM FC_AVAIL_KINDS" SOURCE_CODE) +#READ_SOURCE ("PROGRAM FC_AVAIL_KINDS" "END PROGRAM FC_AVAIL_KINDS" SOURCE_CODE) +set (PROG_SRC_CODE + " + PROGRAM FC_AVAIL_KINDS + IMPLICIT NONE + INTEGER :: ik, jk, k, max_decimal_prec + INTEGER :: num_rkinds = 1, num_ikinds = 1 + INTEGER, DIMENSION(1:10) :: list_ikinds = -1 + INTEGER, DIMENSION(1:10) :: list_rkinds = -1 + + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + + ! Find integer KINDs + list_ikinds(num_ikinds)=SELECTED_INT_KIND(1) + DO ik = 2, 36 + k = SELECTED_INT_KIND(ik) + IF(k.LT.0) EXIT + IF(k.GT.list_ikinds(num_ikinds))THEN + num_ikinds = num_ikinds + 1 + list_ikinds(num_ikinds) = k + ENDIF + ENDDO + + DO k = 1, num_ikinds + WRITE(8,'(I0)', ADVANCE='NO') list_ikinds(k) + IF(k.NE.num_ikinds)THEN + WRITE(8,'(A)',ADVANCE='NO') ',' + ELSE + WRITE(8,'()') + ENDIF + ENDDO + + ! Find real KINDs + list_rkinds(num_rkinds)=SELECTED_REAL_KIND(1) + max_decimal_prec = 1 + + prec: DO ik = 2, 36 + exp: DO jk = 1, 17000 + k = SELECTED_REAL_KIND(ik,jk) + IF(k.LT.0) EXIT exp + IF(k.GT.list_rkinds(num_rkinds))THEN + num_rkinds = num_rkinds + 1 + list_rkinds(num_rkinds) = k + ENDIF + max_decimal_prec = ik + ENDDO exp + ENDDO prec + + DO k = 1, num_rkinds + WRITE(8,'(I0)', ADVANCE='NO') list_rkinds(k) + IF(k.NE.num_rkinds)THEN + WRITE(8,'(A)',ADVANCE='NO') ',' + ELSE + WRITE(8,'()') + ENDIF + ENDDO + + WRITE(8,'(I0)') max_decimal_prec + WRITE(8,'(I0)') num_ikinds + WRITE(8,'(I0)') num_rkinds + END PROGRAM FC_AVAIL_KINDS + " +) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC_CODE} FC_AVAIL_KINDS_RESULT SRC_EXT f90) +else () FORTRAN_RUN ("REAL and INTEGER KINDs" - "${SOURCE_CODE}" + "${PROG_SRC_CODE}" XX YY - PROG_RESULT + FC_AVAIL_KINDS_RESULT ) +endif () + # dnl The output from the above program will be: # dnl -- LINE 1 -- valid integer kinds (comma seperated list) # dnl -- LINE 2 -- valid real kinds (comma seperated list) @@ -122,7 +202,7 @@ FORTRAN_RUN ("REAL and INTEGER KINDs" # dnl -- LINE 4 -- number of valid integer kinds # dnl -- LINE 5 -- number of valid real kinds -file (READ "${CMAKE_BINARY_DIR}/pac_fconftest.out" PROG_OUTPUT) +file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_fconftest.out" PROG_OUTPUT) # Convert the string to a list of strings by replacing the carriage return with a semicolon string (REGEX REPLACE "\n" ";" PROG_OUTPUT "${PROG_OUTPUT}") @@ -165,25 +245,25 @@ message (STATUS "....MAX DECIMAL PRECISION ${${HDF_PREFIX}_PAC_FC_MAX_REAL_PRECI # ********** string (REGEX REPLACE "," ";" VAR "${pac_validIntKinds}") -foreach (KIND ${VAR} ) - set (PROG_SRC - " - PROGRAM main - USE ISO_C_BINDING - IMPLICIT NONE - INTEGER (KIND=${KIND}) a - OPEN(8,FILE='pac_validIntKinds.out',FORM='formatted') - WRITE(8,'(I0)') ${FC_SIZEOF_A} - CLOSE(8) - END - " - ) - FORTRAN_RUN("INTEGER KIND SIZEOF" ${PROG_SRC} - XX - YY - PROG_RESULT1 +foreach (KIND ${VAR}) + set (PROG_SRC_${KIND} + " + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER (KIND=${KIND}) a + OPEN(8,FILE='pac_validIntKinds.out',FORM='formatted') + WRITE(8,'(I0)') ${FC_SIZEOF_A} + CLOSE(8) + END + " ) - file (READ "${CMAKE_BINARY_DIR}/pac_validIntKinds.out" PROG_OUTPUT1) + if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC_${KIND}} VALIDINTKINDS_RESULT_${KIND} SRC_EXT f90) + else () + FORTRAN_RUN("INTEGER KIND SIZEOF" ${PROG_SRC_${KIND}} XX YY VALIDINTKINDS_RESULT_${KIND}) + endif () + file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_validIntKinds.out" PROG_OUTPUT1) string (REGEX REPLACE "\n" "" PROG_OUTPUT1 "${PROG_OUTPUT1}") set (pack_int_sizeof "${pack_int_sizeof} ${PROG_OUTPUT1},") endforeach () @@ -213,24 +293,24 @@ math (EXPR _LEN "${LEN_VAR}-1") list (GET VAR ${_LEN} max_real_fortran_kind) foreach (KIND ${VAR} ) - set (PROG_SRC - " - PROGRAM main - USE ISO_C_BINDING - IMPLICIT NONE - REAL (KIND=${KIND}) a - OPEN(8,FILE='pac_validRealKinds.out',FORM='formatted') - WRITE(8,'(I0)') ${FC_SIZEOF_A} - CLOSE(8) - END - " - ) - FORTRAN_RUN ("REAL KIND SIZEOF" ${PROG_SRC} - XX - YY - PROG_RESULT1 + set (PROG_SRC2_${KIND} + " + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + REAL (KIND=${KIND}) a + OPEN(8,FILE='pac_validRealKinds.out',FORM='formatted') + WRITE(8,'(I0)') ${FC_SIZEOF_A} + CLOSE(8) + END + " ) - file (READ "${CMAKE_BINARY_DIR}/pac_validRealKinds.out" PROG_OUTPUT1) + if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC2_${KIND}} VALIDREALKINDS_RESULT_${KIND} SRC_EXT f90) + else () + FORTRAN_RUN ("REAL KIND SIZEOF" ${PROG_SRC2_${KIND}} XX YY VALIDREALKINDS_RESULT_${KIND}) + endif () + file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_validRealKinds.out" PROG_OUTPUT1) string (REGEX REPLACE "\n" "" PROG_OUTPUT1 "${PROG_OUTPUT1}") set (pack_real_sizeof "${pack_real_sizeof} ${PROG_OUTPUT1},") endforeach () @@ -261,7 +341,7 @@ list (GET VAR ${_LEN} max_real_fortran_sizeof) #----------------------------------------------------------------------------- # Find sizeof of native kinds #----------------------------------------------------------------------------- -FORTRAN_RUN ("SIZEOF NATIVE KINDs" +set (PROG_SRC3 " PROGRAM main USE ISO_C_BINDING @@ -279,11 +359,13 @@ FORTRAN_RUN ("SIZEOF NATIVE KINDs" CLOSE(8) END " - XX - YY - PROG_RESULT - ) - file (READ "${CMAKE_BINARY_DIR}/pac_sizeof_native_kinds.out" PROG_OUTPUT) +) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_fortran_source_runs (${PROG_SRC3} PAC_SIZEOF_NATIVE_KINDS_RESULT SRC_EXT f90) +else () + FORTRAN_RUN ("SIZEOF NATIVE KINDs" ${PROG_SRC3} XX YY PAC_SIZEOF_NATIVE_KINDS_RESULT) +endif () +file (READ "${RUN_OUTPUT_PATH_DEFAULT}/pac_sizeof_native_kinds.out" PROG_OUTPUT) # dnl The output from the above program will be: # dnl -- LINE 1 -- sizeof INTEGER # dnl -- LINE 2 -- kind of INTEGER @@ -352,6 +434,9 @@ set (${HDF_PREFIX}_H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: ENABLE_LANGUAGE (C) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + include (CheckCSourceRuns) +else () #----------------------------------------------------------------------------- # The provided CMake C macros don't provide a general compile/run function # so this one is used. @@ -402,6 +487,7 @@ macro (C_RUN FUNCTION_NAME SOURCE_CODE RETURN_VAR) message (FATAL_ERROR "Compilation of C ${FUNCTION_NAME} - Failed") endif () endmacro () +endif () set (PROG_SRC " @@ -432,7 +518,11 @@ set (PROG_SRC " ) -C_RUN ("maximum decimal precision for C" ${PROG_SRC} PROG_OUTPUT) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + check_c_source_runs (${PROG_SRC} PROG_OUTPUT) +else () + C_RUN ("maximum decimal precision for C" ${PROG_SRC} PROG_OUTPUT) +endif () # dnl The output from the above program will be: # dnl -- LINE 1 -- long double decimal precision diff --git a/config/cmake/HDF5_Examples.cmake.in b/config/cmake/HDF5_Examples.cmake.in index 5c21124..5abb59f 100644 --- a/config/cmake/HDF5_Examples.cmake.in +++ b/config/cmake/HDF5_Examples.cmake.in @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) ############################################################################################################### # This script will build and run the examples from a folder # Execute from a command line: @@ -77,7 +77,7 @@ set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDN #TAR_SOURCE - name of tarfile #if(NOT DEFINED TAR_SOURCE) -# set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.10.13-Source") +# set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.10.15-Source") #endif() ############################################################################################################### diff --git a/config/cmake/HDFCXXCompilerFlags.cmake b/config/cmake/HDFCXXCompilerFlags.cmake new file mode 100644 index 0000000..7bbebbc --- /dev/null +++ b/config/cmake/HDFCXXCompilerFlags.cmake @@ -0,0 +1,354 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +set(CMAKE_CXX_STANDARD 98) +set(CMAKE_CXX_STANDARD_REQUIRED TRUE) +set(CMAKE_CXX_EXTENSIONS OFF) + +set (CMAKE_CXX_FLAGS "${CMAKE_CXX_SANITIZER_FLAGS} ${CMAKE_CXX_FLAGS}") +message (STATUS "Warnings Configuration: CXX default: ${CMAKE_CXX_FLAGS}") +#----------------------------------------------------------------------------- +# Compiler specific flags : Shouldn't there be compiler tests for these +#----------------------------------------------------------------------------- +if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_CXX_FLAGS}") + if (${HDF_CFG_NAME} MATCHES "Debug") + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Og -ftrapv -fno-common") + endif () + else () + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fstdarg-opt") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to disable compiler warnings +#----------------------------------------------------------------------------- +if (HDF5_DISABLE_COMPILER_WARNINGS) + message (STATUS "....Compiler warnings are suppressed") + # MSVC uses /w to suppress warnings. It also complains if another + # warning level is given, so remove it. + if (MSVC) + set (HDF5_WARNINGS_BLOCKED 1) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W0") + endif () + endif () + if (WIN32) + add_definitions (-D_CRT_SECURE_NO_WARNINGS) + endif () + + # Most compilers use -w to suppress warnings. + if (NOT HDF5_WARNINGS_BLOCKED) + if (CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -w") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- +# CDash is configured to only allow 3000 warnings, so +# break into groups (from the config/gnu-flags file) +#----------------------------------------------------------------------------- +if (NOT MSVC AND NOT MINGW) + if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") + list (APPEND HDF5_CMAKE_CXX_FLAGS "-erroff=%none -DBSD_COMP") + else () + # General flags + # + # Note that some of the flags listed here really should be developer + # flags (listed in a separate variable, below) but we put them here + # because they are not raised by the current code and we'd like to + # know if they do start showing up. + # + # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) + # warnings that are emitted. If you need it, add it at configure time. + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/general") + if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 18.0) + list (APPEND H5_CXXFLAGS0 "-Wextra-tokens -Wformat -Wformat-security -Wic-pointer -Wshadow") + list (APPEND H5_CXXFLAGS0 "-Wsign-compare -Wtrigraphs -Wwrite-strings") + endif() + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED + AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + # add the general CXX flags for g++ compiler versions 4.8 and above. + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-general") + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-error-general") + endif () + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/clang-warnings/general") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_CXX_FLAGS "-Minform=inform") + endif () + message (STATUS "CMAKE_CXX_FLAGS_GENERAL=${HDF5_CMAKE_CXX_FLAGS}") + endif () + + #----------------------------------------------------------------------------- + # Option to allow the user to enable developer warnings + # Developer warnings (suggestions from gcc, not code problems) + #----------------------------------------------------------------------------- + if (HDF5_ENABLE_DEV_WARNINGS) + message (STATUS "....HDF5 developer group warnings are enabled") + # if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + # list (APPEND H5_CXXFLAGS0 "-Winline -Wreorder -Wport -Wstrict-aliasing") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-general") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + # ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/developer-general") + endif () + else () + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-general") + # elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") + # ADD_H5_FLAGS (H5_CXXFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/no-developer-general") + endif () + endif () + + if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + # Technically, variable-length arrays are part of the C99 standard, but + # we should approach them a bit cautiously... Only needed for gcc 4.X + if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0 AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8-4.last") + endif () + + # Append more extra warning flags that only gcc 4.8+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-4.8") + else () + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-4.8") + endif () + endif () + + # Append more extra warning flags that only gcc 4.9+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.9") + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-4.9") + endif () + + # Append more extra warning flags that only gcc 5.1+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-5") + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-error-5") + endif () + + # Append more extra warning flags that only gcc 6.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 6.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/6") + endif () + + # Append more extra warning flags that only gcc 7.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXxFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/7") + if (HDF5_ENABLE_DEV_WARNINGS) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-7") + #else () + # ADD_H5_FLAGS (H5_CXXFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-7") + endif () + endif () + + # Append more extra warning flags that only gcc 8.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 8.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/8") + #ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-8") + if (HDF5_ENABLE_DEV_WARNINGS) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-8") + else () + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-8") + endif () + endif () + + # Append more extra warning flags that only gcc 9.x+ know about + if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 9.0) + # autotools always add the C flags with the CXX flags + ADD_H5_FLAGS (H5_CXXFLAGS4 "${HDF5_SOURCE_DIR}/config/gnu-warnings/9") + endif () + endif () +else () + if (NOT MINGW) + list (APPEND HDF5_CMAKE_CXX_FLAGS "/EHsc") + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable all warnings +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_ALL_WARNINGS) + message (STATUS "....All Warnings are enabled") + if (MSVC) + if (HDF5_ENABLE_DEV_WARNINGS) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/Wall /wd4668") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") + endif () + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0} ${H5_CXXFLAGS1} ${H5_CXXFLAGS2} ${H5_CXXFLAGS3} ${H5_CXXFLAGS4}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPZERO_WARNINGS) + message (STATUS "....Group Zero warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W1") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPONE_WARNINGS) + message (STATUS "....Group One warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W2") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS1}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPTWO_WARNINGS) + message (STATUS "....Group Two warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS2}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPTHREE_WARNINGS) + message (STATUS "....Group Three warnings are enabled") + if (MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") + list (APPEND HDF5_CMAKE_CXX_FLAGS "/W4") + endif () + else () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS3}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option to allow the user to enable warnings by groups +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_GROUPFOUR_WARNINGS) + message (STATUS "....Group Four warnings are enabled") + if (NOT MSVC) + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS4}) + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# This is in here to help some of the GCC based IDES like Eclipse +# and code blocks parse the compiler errors and warnings better. +#----------------------------------------------------------------------------- +if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fmessage-length=0") +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-symbols +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_SYMBOLS MATCHES "YES") + if(CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") + endif () + endif () +elseif (HDF5_ENABLE_SYMBOLS MATCHES "NO") + if(CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") + set (CMAKE_CXX_FLAGS "${CMAKE_C_FLAGS} -Wl,-s") + elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -s") + endif () + endif () +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-profiling +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_PROFILING) + if(CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS "${PROFILE_CXXFLAGS}") + endif () +endif () + +#----------------------------------------------------------------------------- +# Option for --enable-optimization +# This option will force/override the default setting for all configurations +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_OPTIMIZATION) + if(CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS "${OPTIMIZE_CXXFLAGS}") + endif () +endif () diff --git a/config/cmake/HDFCompilerFlags.cmake b/config/cmake/HDFCompilerFlags.cmake index adace89..31af2f8 100644 --- a/config/cmake/HDFCompilerFlags.cmake +++ b/config/cmake/HDFCompilerFlags.cmake @@ -12,8 +12,10 @@ set(CMAKE_C_STANDARD 99) set(CMAKE_C_STANDARD_REQUIRED TRUE) -message (STATUS "Warnings Configuration:") set (CMAKE_C_FLAGS "${CMAKE_C99_STANDARD_COMPILE_OPTION} ${CMAKE_C_FLAGS}") +set (CMAKE_C_FLAGS "${CMAKE_C_SANITIZER_FLAGS} ${CMAKE_C_FLAGS}") +set (CMAKE_CXX_FLAGS "${CMAKE_CXX_SANITIZER_FLAGS} ${CMAKE_CXX_FLAGS}") +message (STATUS "Warnings Configuration: default: ${CMAKE_C_FLAGS} : ${CMAKE_CXX_FLAGS}") #----------------------------------------------------------------------------- # Compiler specific flags : Shouldn't there be compiler tests for these #----------------------------------------------------------------------------- @@ -29,18 +31,6 @@ if (CMAKE_COMPILER_IS_GNUCC) endif () endif () endif () -if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_ANSI_CFLAGS} ${CMAKE_CXX_FLAGS}") - if (${HDF_CFG_NAME} MATCHES "Debug") - if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Og -ftrapv -fno-common") - endif () - else () - if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fstdarg-opt") - endif () - endif () -endif () #----------------------------------------------------------------------------- # Option to allow the user to disable compiler warnings @@ -54,10 +44,6 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) set (HDF5_WARNINGS_BLOCKED 1) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W0") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W0") - endif () endif () if (WIN32) add_definitions (-D_CRT_SECURE_NO_WARNINGS) @@ -71,19 +57,20 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) # Most compilers use -w to suppress warnings. if (NOT HDF5_WARNINGS_BLOCKED) set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -w") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -w") - endif () endif () endif () #----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- # CDash is configured to only allow 3000 warnings, so # break into groups (from the config/gnu-flags file) #----------------------------------------------------------------------------- -if (NOT MSVC AND CMAKE_COMPILER_IS_GNUCC) +if (NOT MSVC AND NOT MINGW) if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -erroff=%none -DBSD_COMP") + list (APPEND HDF5_CMAKE_C_FLAGS "-erroff=%none -DBSD_COMP") else () # General flags # @@ -95,125 +82,116 @@ if (NOT MSVC AND CMAKE_COMPILER_IS_GNUCC) # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) # warnings that are emitted. If you need it, add it at configure time. if (CMAKE_C_COMPILER_ID STREQUAL "Intel") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wcheck -Wall") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wcomment -Wdeprecated -Wmain -Wmissing-declarations -Wmissing-prototypes -Wp64 -Wpointer-arith") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wreturn-type -Wstrict-prototypes -Wuninitialized") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wunknown-pragmas -Wunused-function -Wunused-variable") + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/general") + list (APPEND H5_CFLAGS0 "-Wcomment -Wdeprecated -Wmain -Wmissing-declarations -Wmissing-prototypes -Wp64 -Wpointer-arith") + list (APPEND H5_CFLAGS0 "-Wreturn-type -Wstrict-prototypes -Wuninitialized") + list (APPEND H5_CFLAGS0 "-Wunknown-pragmas -Wunused-function -Wunused-variable") # this is just a failsafe - set (H5_CFLAGS0 "${H5_CFLAGS0} -finline-functions") + list (APPEND H5_CFLAGS0 "-finline-functions") if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 18.0) - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wextra-tokens -Wformat -Wformat-security -Wic-pointer -Wshadow") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wsign-compare -Wtrigraphs -Wwrite-strings") + list (APPEND H5_CFLAGS0 "-Wextra-tokens -Wformat -Wformat-security -Wic-pointer -Wshadow") + list (APPEND H5_CFLAGS0 "-Wsign-compare -Wtrigraphs -Wwrite-strings") endif() elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pedantic -Wall -Wextra") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wbad-function-cast -Wc++-compat -Wcast-align") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wcast-qual -Wconversion -Wdeclaration-after-statement -Wdisabled-optimization -Wfloat-equal") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wformat=2 -Winit-self -Winvalid-pch -Wmissing-declarations -Wmissing-include-dirs") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpacked -Wpointer-arith") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wundef -Wunused-macros -Wunsafe-loop-optimizations -Wwrite-strings") + # Add general CFlags for GCC versions 4.8 and above + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/general") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-general") + endif () # gcc automatically inlines based on the optimization level # this is just a failsafe - set (H5_CFLAGS0 "${H5_CFLAGS0} -finline-functions") + list (APPEND H5_CFLAGS0 "-finline-functions") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (HDF5_CMAKE_C_FLAGS "${HDF5_SOURCE_DIR}/config/clang-warnings/general") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/error-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_C_FLAGS "-Minform=inform") endif () + message (STATUS "CMAKE_C_FLAGS_GENERAL=${HDF5_CMAKE_C_FLAGS}") endif () - #----------------------------------------------------------------------------- - # Option to allow the user to enable developer warnings - # Developer warnings (suggestions from gcc, not code problems) - #----------------------------------------------------------------------------- - option (HDF5_ENABLE_DEV_WARNINGS "Enable HDF5 developer group warnings" OFF) - if (HDF5_ENABLE_DEV_WARNINGS) - message (STATUS "....HDF5 developer group warnings are enabled") - if (CMAKE_C_COMPILER_ID STREQUAL "Intel") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Winline -Wreorder -Wport -Wstrict-aliasing") - elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Winline -Waggregate-return -Wmissing-format-attribute -Wmissing-noreturn") - endif () - else () - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - set (H5_CFLAGS0 "${H5_CFLAGS0} -Wno-inline -Wno-aggregate-return -Wno-missing-format-attribute -Wno-missing-noreturn") - endif () + #----------------------------------------------------------------------------- + # Option to allow the user to enable developer warnings + # Developer warnings (suggestions from gcc, not code problems) + #----------------------------------------------------------------------------- + option (HDF5_ENABLE_DEV_WARNINGS "Enable HDF5 developer group warnings" OFF) + if (HDF5_ENABLE_DEV_WARNINGS) + message (STATUS "....HDF5 developer group warnings are enabled") + if (CMAKE_C_COMPILER_ID STREQUAL "Intel") + list (APPEND H5_CFLAGS0 "-Winline -Wreorder -Wport -Wstrict-aliasing") + elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/developer-general") endif () - - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - # Append warning flags that only gcc 4.3+ knows about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wlogical-op -Wlarger-than=2560 -Wvla") - - # Append more extra warning flags that only gcc 4.4+ know about - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat") + else () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-general") + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + ADD_H5_FLAGS (H5_CFLAGS0 "${HDF5_SOURCE_DIR}/config/clang-warnings/no-developer-general") endif () + endif () - # Append more extra warning flags that only gcc 4.5+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.5) - set (H5_CFLAGS1 "${H5_CFLAGS1} -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants") - endif () - # Append more extra warning flags that only gcc 4.6+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wdouble-promotion -Wtrampolines") - if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=const") - else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=const") - endif () - endif () - - # Append more extra warning flags that only gcc 4.7+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wstack-usage=8192 -Wvector-operation-performance") - if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn") - else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn") - endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + # Technically, variable-length arrays are part of the C99 standard, but + # we should approach them a bit cautiously... Only needed for gcc 4.X + if (CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0 AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8-4.last") endif () # Append more extra warning flags that only gcc 4.8+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.8) + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.8") if (HDF5_ENABLE_DEV_WARNINGS) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wsuggest-attribute=format") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-4.8") else () - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wno-suggest-attribute=format") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-4.8") endif () endif () # Append more extra warning flags that only gcc 4.9+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.9) - set (H5_CFLAGS2 "${H5_CFLAGS2} -Wdate-time") + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.9) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/4.9") endif () - # Append more extra warning flags that only gcc 5.1+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.1) - set (H5_CFLAGS3 "${H5_CFLAGS3} -Warray-bounds=2 -Wc99-c11-compat") + # Append more extra warning flags that only gcc 5.x+ know about + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/5") + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-5") endif () # Append more extra warning flags that only gcc 6.x+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 6.0) - set (H5_CFLAGS4 "${H5_CFLAGS4} -Wnull-dereference -Wunused-const-variable -Wduplicated-cond -Whsa -Wnormalized") + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 6.0) + ADD_H5_FLAGS (H5_CFLAGS1 "${HDF5_SOURCE_DIR}/config/gnu-warnings/6") endif () # Append more extra warning flags that only gcc 7.x+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 7.0) - set (H5_CFLAGS4 "${H5_CFLAGS4} -Walloc-zero -Walloca -Wduplicated-branches -Wformat-overflow=2 -Wformat-truncation=2 -Wimplicit-fallthrough=5 -Wrestrict") + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 7.0) + ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/7") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-7") + #else () + # ADD_H5_FLAGS (H5_CFLAGS2 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-7") + endif () endif () # Append more extra warning flags that only gcc 8.x+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 8.0) - set (H5_CFLAGS4 "${H5_CFLAGS4} -Wattribute-alias -Wcast-align=strict -Wshift-overflow=2 -Wno-suggest-attribute=cold -Wno-suggest-attribute=malloc") + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 8.0) + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/8") + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/error-8") + if (HDF5_ENABLE_DEV_WARNINGS) + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/developer-8") + else () + ADD_H5_FLAGS (H5_CFLAGS3 "${HDF5_SOURCE_DIR}/config/gnu-warnings/no-developer-8") + endif () endif () # Append more extra warning flags that only gcc 9.x+ know about - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.0) - set (H5_CFLAGS4 "${H5_CFLAGS4} -Wattribute-alias=2 -Wmissing-profile") + if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.0) + ADD_H5_FLAGS (H5_CFLAGS4 "${HDF5_SOURCE_DIR}/config/gnu-warnings/9") endif () -elseif (CMAKE_C_COMPILER_ID STREQUAL "PGI") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Minform=inform") + endif () endif () #----------------------------------------------------------------------------- @@ -225,23 +203,13 @@ if (HDF5_ENABLE_ALL_WARNINGS) if (MSVC) if (HDF5_ENABLE_DEV_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Wall /wd4668") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /Wall /wd4668") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS "/Wall /wd4668") else () string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W3") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W3") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS "/W3") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS0} ${H5_CFLAGS1} ${H5_CFLAGS2}") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0} ${H5_CFLAGS1} ${H5_CFLAGS2} ${H5_CFLAGS3} ${H5_CFLAGS4}) endif () endif () @@ -252,16 +220,10 @@ option (HDF5_ENABLE_GROUPZERO_WARNINGS "Enable group zero warnings" OFF) if (HDF5_ENABLE_GROUPZERO_WARNINGS) message (STATUS "....Group Zero warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W1") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W1") - endif () + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W1") else () - if (CMAKE_COMPILER_IS_GNUCC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS0}") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0}) endif () endif () @@ -272,14 +234,10 @@ option (HDF5_ENABLE_GROUPONE_WARNINGS "Enable group one warnings" OFF) if (HDF5_ENABLE_GROUPONE_WARNINGS) message (STATUS "....Group One warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W2") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W2") - endif () + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W2") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS1}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS1}) endif () endif () @@ -290,14 +248,10 @@ option (HDF5_ENABLE_GROUPTWO_WARNINGS "Enable group two warnings" OFF) if (HDF5_ENABLE_GROUPTWO_WARNINGS) message (STATUS "....Group Two warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W3") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W3") - endif () + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W3") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS2}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS2}) endif () endif () @@ -308,14 +262,10 @@ option (HDF5_ENABLE_GROUPTHREE_WARNINGS "Enable group three warnings" OFF) if (HDF5_ENABLE_GROUPTHREE_WARNINGS) message (STATUS "....Group Three warnings are enabled") if (MSVC) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W4") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4") - endif () + string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") + list (APPEND HDF5_CMAKE_C_FLAGS "/W4") else () - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS3}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS3}) endif () endif () @@ -326,7 +276,7 @@ option (HDF5_ENABLE_GROUPFOUR_WARNINGS "Enable group four warnings" OFF) if (HDF5_ENABLE_GROUPFOUR_WARNINGS) message (STATUS "....Group Four warnings are enabled") if (NOT MSVC) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${H5_CFLAGS4}") + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS4}) endif () endif () @@ -337,9 +287,6 @@ endif () if (CMAKE_COMPILER_IS_GNUCC) set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fmessage-length=0") endif () -if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fmessage-length=0") -endif () #----------------------------------------------------------------------------- # Option for --enable-asserts @@ -369,26 +316,12 @@ if (HDF5_ENABLE_SYMBOLS MATCHES "YES") elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g -fno-omit-frame-pointer") endif () - if(CMAKE_CXX_COMPILER_LOADED) - if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") - elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g") - endif () - endif () elseif (HDF5_ENABLE_SYMBOLS MATCHES "NO") if (CMAKE_C_COMPILER_ID STREQUAL "Intel") set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wl,-s") elseif (CMAKE_C_COMPILER_ID STREQUAL "GNU") set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -s") endif () - if(CMAKE_CXX_COMPILER_LOADED) - if (CMAKE_CXX_COMPILER_ID STREQUAL "Intel") - set (CMAKE_CXX_FLAGS "${CMAKE_C_FLAGS} -Wl,-s") - elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -s") - endif () - endif () endif () MARK_AS_ADVANCED (HDF5_ENABLE_SYMBOLS) @@ -398,10 +331,7 @@ MARK_AS_ADVANCED (HDF5_ENABLE_SYMBOLS) #----------------------------------------------------------------------------- option (HDF5_ENABLE_PROFILING "Enable profiling flags independently from the build mode." OFF) if (HDF5_ENABLE_PROFILING) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${PROFILE_CFLAGS}") - if(CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${PROFILE_CXXFLAGS}") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS "${PROFILE_CFLAGS}") endif () MARK_AS_ADVANCED (HDF5_ENABLE_PROFILING) @@ -411,9 +341,6 @@ MARK_AS_ADVANCED (HDF5_ENABLE_PROFILING) #----------------------------------------------------------------------------- option (HDF5_ENABLE_OPTIMIZATION "Enable optimization flags/settings independently from the build mode" OFF) if (HDF5_ENABLE_OPTIMIZATION) - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${OPTIMIZE_CFLAGS}") - if(CMAKE_CXX_COMPILER_LOADED) - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OPTIMIZE_CXXFLAGS}") - endif () + list (APPEND HDF5_CMAKE_C_FLAGS "${OPTIMIZE_CFLAGS}") endif () MARK_AS_ADVANCED (HDF5_ENABLE_OPTIMIZATION) diff --git a/config/cmake/HDFFortranCompilerFlags.cmake b/config/cmake/HDFFortranCompilerFlags.cmake new file mode 100644 index 0000000..2bbb35d --- /dev/null +++ b/config/cmake/HDFFortranCompilerFlags.cmake @@ -0,0 +1,112 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# + +message (STATUS "Warnings Configuration: default Fortran: ${CMAKE_Fortran_FLAGS}") + +#----------------------------------------------------------------------------- +# Option to allow the user to disable compiler warnings +#----------------------------------------------------------------------------- +if (HDF5_DISABLE_COMPILER_WARNINGS) + message (STATUS "....Compiler warnings are suppressed") + # MSVC uses /w to suppress warnings. It also complains if another + # warning level is given, so remove it. + if (MSVC) + set (HDF5_WARNINGS_BLOCKED 1) + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} /warn:none") + endif () + endif () + if (WIN32) + add_definitions (-D_CRT_SECURE_NO_WARNINGS) + endif () + # Borland uses -w- to suppress warnings. + if (BORLAND) + set (HDF5_WARNINGS_BLOCKED 1) + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -w-") + endif () + + # Most compilers use -w to suppress warnings. + if (NOT HDF5_WARNINGS_BLOCKED) + set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -w") + endif () +endif () + +#----------------------------------------------------------------------------- +# HDF5 library compile options +#----------------------------------------------------------------------------- + +#----------------------------------------------------------------------------- +# CDash is configured to only allow 3000 warnings, so +# break into groups (from the config/gnu-flags file) +#----------------------------------------------------------------------------- +if (NOT MSVC AND NOT MINGW) + # General flags + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/ifort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-stand:f03" "-free") + elseif (CMAKE_Fortran_COMPILER_ID STREQUAL "GNU") + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-ffree-form" "-fimplicit-none") + if (CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 8.0 AND NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.6) + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-std=f2008ts") + else () + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-std=f2008") + endif () + elseif (CMAKE_Fortran_COMPILER_ID STREQUAL "PGI") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "-Mfreeform" "-Mdclchk" "-Mstandard" "-Mallocatable=03") + endif () + message (STATUS "HDF5_CMAKE_Fortran_FLAGS=${HDF5_CMAKE_Fortran_FLAGS}") + + if (CMAKE_Fortran_COMPILER_ID STREQUAL "GNU") + + # Append more extra warning flags that only gcc 4.8+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.8) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-4.8") + endif () + + # Append more extra warning flags that only gcc 4.9+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 4.9) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-4.9") + #endif () + + # Append more extra warning flags that only gcc 5.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 5.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-5") + endif () + + # Append more extra warning flags that only gcc 6.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 6.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-6") + endif () + + # Append more extra warning flags that only gcc 7.x+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 7.0) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-7") + #endif () + + # Append more extra warning flags that only gcc 8.x+ know about + if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 8.0) + ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-8") + endif () + + # Append more extra warning flags that only gcc 9.x+ know about + #if (NOT CMAKE_Fortran_COMPILER_VERSION VERSION_LESS 9.0) + # ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/gfort-9") + #endif () + endif () +else () + if (CMAKE_Fortran_COMPILER_ID STREQUAL "Intel") + #ADD_H5_FLAGS (HDF5_CMAKE_Fortran_FLAGS "${HDF5_SOURCE_DIR}/config/intel-warnings/win-ifort-general") + list (APPEND HDF5_CMAKE_Fortran_FLAGS "/warn:all" "/stand:f03" "/free") + endif () +endif () + diff --git a/config/cmake/PkgInfo.in b/config/cmake/PkgInfo.in index e530f88..ae54035 100644 --- a/config/cmake/PkgInfo.in +++ b/config/cmake/PkgInfo.in @@ -1 +1 @@ -FMWK????
\ No newline at end of file +FMWK???? diff --git a/config/cmake/README.txt.cmake.in b/config/cmake/README.txt.cmake.in index b29d50b..f621515 100644 --- a/config/cmake/README.txt.cmake.in +++ b/config/cmake/README.txt.cmake.in @@ -9,7 +9,7 @@ It was built with the following options: -- @LIB_TYPE@ C/C++/Fortran libraries -- SZIP (encoder enabled) and ZLIB -- @LIB_TYPE@ HDF5 tools - -- Java + -- Java @Java_VERSION@ The contents of this directory are: @@ -17,6 +17,18 @@ The contents of this directory are: README.txt - This file @HDF5_PACKAGE_NAME@-@HDF5_PACKAGE_VERSION@-@BINARY_SYSTEM_NAME@.@BINARY_INSTALL_ENDING@ - HDF5 Install Package +This binary was built with the ZLIB and SZIP/Libaec external libraries and are +included for convenience. Libaec is an unrestricted open-source replacement for SZIP +(version 1.0.4, Encoder ENABLED). + +The official ZLIB and SZIP/Libaec pages are at: + + ZLIB: https://git.savannah.gnu.org/cgit/gzip.git/ + https://git.savannah.gnu.org/cgit/gzip.git/tree/COPYING + SZIP/Libaec: https://gitlab.dkrz.de/k202009/libaec + https://gitlab.dkrz.de/k202009/libaec/-/blob/master/Copyright.txt + + Installation =========================================================================== 1. Execute @HDF5_PACKAGE_NAME@-@HDF5_PACKAGE_VERSION@-@BINARY_SYSTEM_NAME@.@BINARY_INSTALL_ENDING@ @@ -28,7 +40,8 @@ After Installation The examples folder, HDF5Examples, located in the HDF5 install folder, can be built and tested with CMake and the supplied HDF5_Examples.cmake file. The HDF5_Examples.cmake expects HDF5 to have -been installed in the default location with above compilers. Also, the CMake +been installed in the default location with above compilers (see the +libhdf5.settings file in the lib install folder). Also, the CMake utility should be installed. To test the installation with the examples; diff --git a/config/cmake/UseJava.cmake b/config/cmake/UseJava.cmake index 8efee11..375004e 100644 --- a/config/cmake/UseJava.cmake +++ b/config/cmake/UseJava.cmake @@ -536,7 +536,7 @@ function(add_jar _TARGET_NAME) if (_JAVA_SOURCE_FILE MATCHES "^@(.+)$") get_filename_component(_JAVA_FULL ${CMAKE_MATCH_1} ABSOLUTE) - list(APPEND _JAVA_COMPILE_FILELISTS ${_JAVA_FULL}) + list (APPEND _JAVA_COMPILE_FILELISTS ${_JAVA_FULL}) elseif (_JAVA_EXT MATCHES ".java") file(RELATIVE_PATH _JAVA_REL_BINARY_PATH ${CMAKE_CURRENT_BINARY_DIR} ${_JAVA_FULL}) @@ -550,7 +550,7 @@ function(add_jar _TARGET_NAME) endif () get_filename_component(_JAVA_REL_PATH ${_JAVA_REL_PATH} PATH) - list(APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE}) set(_JAVA_CLASS_FILE "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_REL_PATH}/${_JAVA_FILE}.class") set(_JAVA_CLASS_FILES ${_JAVA_CLASS_FILES} ${_JAVA_CLASS_FILE}) @@ -561,15 +561,15 @@ function(add_jar _TARGET_NAME) # Ignored for backward compatibility elseif (_JAVA_EXT STREQUAL "") - list(APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH}) - list(APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}}) + list (APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH}) + list (APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}}) else () __java_copy_file(${CMAKE_CURRENT_SOURCE_DIR}/${_JAVA_SOURCE_FILE} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE} "Copying ${_JAVA_SOURCE_FILE} to the build directory") - list(APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}) - list(APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}) + list (APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE}) endif () endforeach() @@ -578,17 +578,17 @@ function(add_jar _TARGET_NAME) get_target_property(_JAVA_JAR_PATH ${_JAVA_INCLUDE_JAR} JAR_FILE) if (_JAVA_JAR_PATH) string(APPEND CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_JAR_PATH}") - list(APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH}) - list(APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR}) - list(APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_JAR_PATH}) + list (APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH}) + list (APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR}) + list (APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_JAR_PATH}) else () message(SEND_ERROR "add_jar: INCLUDE_JARS target ${_JAVA_INCLUDE_JAR} is not a jar") endif () else () string(APPEND CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_INCLUDE_JAR}") - list(APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}") - list(APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}") - list(APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}") + list (APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}") + list (APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}") + list (APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}") endif () endforeach() @@ -985,7 +985,7 @@ function(create_javadoc _target) elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_packages ${arg}) + list (APPEND _javadoc_packages ${arg}) endif () elseif (_state STREQUAL "files") if (arg STREQUAL "PACKAGES") @@ -1009,7 +1009,7 @@ function(create_javadoc _target) elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_files ${arg}) + list (APPEND _javadoc_files ${arg}) endif () elseif (_state STREQUAL "sourcepath") if (arg STREQUAL "PACKAGES") @@ -1033,7 +1033,7 @@ function(create_javadoc _target) elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_sourcepath ${arg}) + list (APPEND _javadoc_sourcepath ${arg}) endif () elseif (_state STREQUAL "classpath") if (arg STREQUAL "PACKAGES") @@ -1057,7 +1057,7 @@ function(create_javadoc _target) elseif (arg STREQUAL "VERSION") set(_state "version") else () - list(APPEND _javadoc_classpath ${arg}) + list (APPEND _javadoc_classpath ${arg}) endif () elseif (_state STREQUAL "installpath") if (arg STREQUAL "PACKAGES") diff --git a/config/cmake/UseJavaClassFilelist.cmake b/config/cmake/UseJavaClassFilelist.cmake index b98276f..8348e4c 100644 --- a/config/cmake/UseJavaClassFilelist.cmake +++ b/config/cmake/UseJavaClassFilelist.cmake @@ -23,7 +23,7 @@ if (CMAKE_JAVA_CLASS_OUTPUT_PATH) file(GLOB_RECURSE _JAVA_GLOBBED_TMP_FILES "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${JAR_CLASS_PREFIX}/*.class") if (_JAVA_GLOBBED_TMP_FILES) - list(APPEND _JAVA_GLOBBED_FILES ${_JAVA_GLOBBED_TMP_FILES}) + list (APPEND _JAVA_GLOBBED_FILES ${_JAVA_GLOBBED_TMP_FILES}) endif () endforeach() else() diff --git a/config/cmake/cacheinit.cmake b/config/cmake/cacheinit.cmake index 5254115..64e8dcc 100644 --- a/config/cmake/cacheinit.cmake +++ b/config/cmake/cacheinit.cmake @@ -23,6 +23,9 @@ set (HDF_PACKAGE_NAMESPACE "hdf5::" CACHE STRING "Name for HDF package namespace set (HDF5_BUILD_FORTRAN ON CACHE BOOL "Build FORTRAN support" FORCE) +set (HDF5_INSTALL_MOD_FORTRAN "NO" CACHE STRING "Copy FORTRAN mod files to include directory (NO SHARED STATIC)" FORCE) +set_property (CACHE HDF5_INSTALL_MOD_FORTRAN PROPERTY STRINGS NO SHARED STATIC) + set (HDF5_BUILD_GENERATORS ON CACHE BOOL "Build Test Generators" FORCE) set (HDF5_ENABLE_Z_LIB_SUPPORT ON CACHE BOOL "Enable Zlib Filters" FORCE) @@ -43,7 +46,9 @@ set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT TGZ) set (ZLIB_TGZ_NAME "ZLib.tar.gz" CACHE STRING "Use ZLib from compressed file" FORCE) set (SZIP_TGZ_NAME "SZip.tar.gz" CACHE STRING "Use SZip from compressed file" FORCE) +set (SZAEC_TGZ_NAME "LIBAEC.tar.gz" CACHE STRING "Use SZip AEC from compressed file" FORCE) +set (USE_LIBAEC ON CACHE BOOL "Use libaec szip replacement" FORCE) set (ZLIB_PACKAGE_NAME "zlib" CACHE STRING "Name of ZLIB package" FORCE) - +set (LIBAEC_PACKAGE_NAME "libaec" CACHE STRING "Name of AEC SZIP package" FORCE) set (SZIP_PACKAGE_NAME "szip" CACHE STRING "Name of SZIP package" FORCE) diff --git a/config/cmake/fileCompareTest.cmake b/config/cmake/fileCompareTest.cmake new file mode 100644 index 0000000..d913da0 --- /dev/null +++ b/config/cmake/fileCompareTest.cmake @@ -0,0 +1,104 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# fileCompareTest.cmake compares two files. + +# arguments checking +if (NOT TEST_FOLDER) + message (FATAL_ERROR "Require TEST_FOLDER to be defined") +endif () +if (NOT TEST_ONEFILE) + message (FATAL_ERROR "Require TEST_ONEFILE the first file to be defined") +endif () +if (NOT TEST_TWOFILE) + message (FATAL_ERROR "Require TEST_TWOFILE the second file to be defined") +endif () +if (NOT TEST_FUNCTION) + message (FATAL_ERROR "Require TEST_FUNCTION (LT,LTEQ,EQ,GTEQ,GT) to be defined") +endif () +#if (NOT TEST_EXPECT) +# message (STATUS "Require TEST_EXPECT to be defined") +#endif () + +set (TEST_ONE_SIZE 0) +set (TEST_TWO_SIZE 0) +set (TEST_ONE_STRING 0) +set (TEST_TWO_STRING 0) +set (TEST_ONE_STRING_LEN 0) +set (TEST_TWO_STRING_LEN 0) + +if (TEST_STRINGS STREQUAL "YES") + # find the length of the first file + #s1=`cat $ufile | wc -c | sed -e 's/ //g'` + file (STRINGS ${TEST_FOLDER}/${TEST_ONEFILE} TEST_ONE_STRING) + string (LENGTH ${TEST_ONE_STRING} TEST_ONE_STRING_LEN) + + # Get the size of the second file. + file (STRINGS ${TEST_FOLDER}/${TEST_TWOFILE} TEST_TWO_STRING) + string (LENGTH ${TEST_TWO_STRING} TEST_TWO_STRING_LEN) + + math (EXPR TEST_STRING_SIZE "${TEST_ONE_STRING_LEN} - ${TEST_TWO_STRING_LEN}" ) + + # now compare the outputs + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_ONEFILE} ${TEST_FOLDER}/${TEST_TWOFILE} + RESULT_VARIABLE TEST_RESULT + ) + + message (STATUS "COMPARE Result: ${TEST_RESULT}: ${TEST_STRING_SIZE}=${TEST_U_STRING_LEN}-${TEST_O_STRING_LEN}") + # if the return value is !=${TEST_EXPECT} bail out + if (NOT TEST_RESULT EQUAL TEST_EXPECT) + message (FATAL_ERROR "Failed: The output of ${TEST_FOLDER}/${TEST_ONEFILE} did not match ${TEST_FOLDER}/${TEST_TWOFILE}.\n${TEST_ERROR}") + endif () +else () + if (CMAKE_VERSION VERSION_LESS "3.14.0") + message (FATAL_ERROR "CANNOT get file size, file command SIZE not supported") + else () + file (SIZE ${TEST_FOLDER}/${TEST_ONEFILE} TEST_ONE_SIZE) + file (SIZE ${TEST_FOLDER}/${TEST_TWOFILE} TEST_TWO_SIZE) + if (TEST_FUNCTION MATCHES "LT") + if (TEST_ONE_SIZE LESS TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was less ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT less ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "LTEQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was less or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT less or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "EQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "GTEQ") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was greater or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT greater or equal ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + elseif (TEST_FUNCTION MATCHES "GT") + if (TEST_ONE_SIZE LESS_EQUAL TEST_TWO_SIZE) + message (STATUS "Passed: The size of ${TEST_FOLDER}/${TEST_ONEFILE} was greater ${TEST_FOLDER}/${TEST_TWOFILE}") + else () + message (FATAL_ERROR "The size of ${TEST_FOLDER}/${TEST_ONEFILE} was NOT greater ${TEST_FOLDER}/${TEST_TWOFILE}") + endif () + else () + message (FATAL_ERROR "Failed: Incorrect test size compare command provided.\n${TEST_ERROR}") + endif () + endif () +endif () + +# everything went fine... + diff --git a/config/cmake/hdf5-config.cmake.in b/config/cmake/hdf5-config.cmake.in index b5a12a6..a0e93df 100644 --- a/config/cmake/hdf5-config.cmake.in +++ b/config/cmake/hdf5-config.cmake.in @@ -114,7 +114,7 @@ if (NOT TARGET "@HDF5_PACKAGE@") include (@PACKAGE_SHARE_INSTALL_DIR@/@ZLIB_PACKAGE_NAME@/@ZLIB_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif () if (${HDF5_PACKAGE_NAME}_ENABLE_SZIP_SUPPORT AND ${HDF5_PACKAGE_NAME}_PACKAGE_EXTLIBS) - include (@PACKAGE_SHARE_INSTALL_DIR@/@SZIP_PACKAGE_NAME@/@SZIP_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) + include (@PACKAGE_SHARE_INSTALL_DIR@/@SZ_PACKAGE_NAME@/@SZ_PACKAGE_NAME@@HDF_PACKAGE_EXT@-targets.cmake) endif () include (@PACKAGE_SHARE_INSTALL_DIR@/@HDF5_PACKAGE@/@HDF5_PACKAGE@@HDF_PACKAGE_EXT@-targets.cmake) endif () diff --git a/config/cmake/jrunTest.cmake b/config/cmake/jrunTest.cmake index ee4517c..41570eb 100644 --- a/config/cmake/jrunTest.cmake +++ b/config/cmake/jrunTest.cmake @@ -75,16 +75,19 @@ message (STATUS "COMMAND Result: ${TEST_RESULT}") # if the .err file exists and ERRROR_APPEND is enabled if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) - if (TEST_MASK_FILE) - STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") - endif () + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () - if (NOT ERROR_APPEND) - # write back to original .err file - file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") - else () - # append error output to the stdout output file - file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () endif () endif () @@ -122,147 +125,171 @@ endif () message (STATUS "COMMAND Error: ${TEST_ERROR}") # compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) if (NOT TEST_SKIP_COMPARE) if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") - if (WIN32 OR MINGW) - configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) - if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") - file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") endif () - #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") - endif () - if (NOT TEST_SORT_COMPARE) - # now compare the output with the reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} - RESULT_VARIABLE TEST_RESULT - ) - else () - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) - list (SORT v1) - list (SORT v2) - if (NOT v1 STREQUAL v2) - set(TEST_RESULT 1) + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () endif () - endif () - if (TEST_RESULT) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) - list (LENGTH test_ref len_ref) - if (len_act GREATER 0 AND len_ref GREATER 0) - math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT str_act STREQUAL str_ref) - if (str_act) - set (TEST_RESULT 1) - message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () - endforeach () - else () - if (len_act EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if (len_ref EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) endif () endif () - if (NOT len_act EQUAL len_ref) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") # again, if return value is !=0 scream and shout - if (TEST_RESULT) + if (TEST_COMPARE_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () endif () # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) if (TEST_ERRREF) - if (WIN32 OR MINGW) - configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) - if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") - file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") endif () - #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) - #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") - endif () - # now compare the error output with the error reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} - RESULT_VARIABLE TEST_RESULT - ) - if (TEST_RESULT) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) - list (LENGTH test_ref len_ref) - math (EXPR _FP_LEN "${len_ref} - 1") - if (len_act GREATER 0 AND len_ref GREATER 0) + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT str_act STREQUAL str_ref) - if (str_act) - set (TEST_RESULT 1) - message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () - endforeach () - else () - if (len_act EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if (len_ref EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) endif () endif () - if (NOT len_act EQUAL len_ref) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") # again, if return value is !=0 scream and shout - if (TEST_RESULT) + if (TEST_ERRREF_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () endif () +set (TEST_GREP_RESULT 0) if (TEST_GREP_COMPARE) # now grep the output with the reference file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () - # TEST_REFERENCE should always be matched - string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) - string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if (NOT TEST_RESULT) - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () + endif () endif () +endif () - string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) - if (TEST_EXPECT) - # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match - string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (TEST_RESULT) - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") - endif () +# dump the output unless nodisplay option is set +if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY) + if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + execute_process ( + COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM} + RESULT_VARIABLE TEST_RESULT + ) endif () endif () diff --git a/config/cmake/libhdf5.settings.cmake.in b/config/cmake/libhdf5.settings.cmake.in index 8397d68..ebcbd61 100644 --- a/config/cmake/libhdf5.settings.cmake.in +++ b/config/cmake/libhdf5.settings.cmake.in @@ -38,7 +38,7 @@ Languages: H5_CPPFLAGS: @H5_CPPFLAGS@ AM_CPPFLAGS: @AM_CPPFLAGS@ CFLAGS: @CMAKE_C_FLAGS@ - H5_CFLAGS: @H5_CFLAGS@ + H5_CFLAGS: @HDF5_CMAKE_C_FLAGS@ AM_CFLAGS: @AM_CFLAGS@ Shared C Library: @H5_ENABLE_SHARED_LIB@ Static C Library: @H5_ENABLE_STATIC_LIB@ @@ -46,7 +46,7 @@ Languages: Fortran: @HDF5_BUILD_FORTRAN@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Compiler: @CMAKE_Fortran_COMPILER@ @CMAKE_Fortran_COMPILER_VERSION@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Flags: @CMAKE_Fortran_FLAGS@ -@BUILD_FORTRAN_CONDITIONAL_TRUE@ H5 Fortran Flags: @H5_FCFLAGS@ +@BUILD_FORTRAN_CONDITIONAL_TRUE@ H5 Fortran Flags: @HDF5_CMAKE_Fortran_FLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ AM Fortran Flags: @AM_FCFLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Shared Fortran Library: @H5_ENABLE_SHARED_LIB@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Static Fortran Library: @H5_ENABLE_STATIC_LIB@ @@ -54,7 +54,7 @@ Languages: C++: @HDF5_BUILD_CPP_LIB@ @BUILD_CXX_CONDITIONAL_TRUE@ C++ Compiler: @CMAKE_CXX_COMPILER@ @CMAKE_CXX_COMPILER_VERSION@ @BUILD_CXX_CONDITIONAL_TRUE@ C++ Flags: @CMAKE_CXX_FLAGS@ -@BUILD_CXX_CONDITIONAL_TRUE@ H5 C++ Flags: @H5_CXXFLAGS@ +@BUILD_CXX_CONDITIONAL_TRUE@ H5 C++ Flags: @HDF5_CMAKE_CXX_FLAGS@ @BUILD_CXX_CONDITIONAL_TRUE@ AM C++ Flags: @AM_CXXFLAGS@ @BUILD_CXX_CONDITIONAL_TRUE@ Shared C++ Library: @H5_ENABLE_SHARED_LIB@ @BUILD_CXX_CONDITIONAL_TRUE@ Static C++ Library: @H5_ENABLE_STATIC_LIB@ @@ -76,6 +76,7 @@ Parallel Filtered Dataset Writes: @PARALLEL_FILTERED_WRITES@ I/O filters (external): @EXTERNAL_FILTERS@ MPE: @H5_HAVE_LIBLMPE@ Direct VFD: @H5_HAVE_DIRECT@ + Mirror VFD: @H5_HAVE_MIRROR_VFD@ (Read-Only) S3 VFD: @H5_HAVE_ROS3_VFD@ (Read-Only) HDFS VFD: @H5_HAVE_LIBHDFS@ dmalloc: @H5_HAVE_LIBDMALLOC@ @@ -84,5 +85,6 @@ Parallel Filtered Dataset Writes: @PARALLEL_FILTERED_WRITES@ Using memory checker: @HDF5_ENABLE_USING_MEMCHECKER@ Memory allocation sanity checks: @HDF5_MEMORY_ALLOC_SANITY_CHECK@ Function Stack Tracing: @HDF5_ENABLE_CODESTACK@ + Use file locking: @HDF5_FILE_LOCKING_SETTING@ Strict File Format Checks: @HDF5_STRICT_FORMAT_CHECKS@ Optimization Instrumentation: @HDF5_Enable_Instrument@ diff --git a/config/cmake/mccacheinit.cmake b/config/cmake/mccacheinit.cmake index 1608202..af07894 100644 --- a/config/cmake/mccacheinit.cmake +++ b/config/cmake/mccacheinit.cmake @@ -51,11 +51,13 @@ set_property (CACHE HDF5_ALLOW_EXTERNAL_SUPPORT PROPERTY STRINGS NO GIT TGZ) set (ZLIB_TGZ_NAME "ZLib.tar.gz" CACHE STRING "Use ZLib from compressed file" FORCE) set (SZIP_TGZ_NAME "SZip.tar.gz" CACHE STRING "Use SZip from compressed file" FORCE) +set (SZAEC_TGZ_NAME "LIBAEC.tar.gz" CACHE STRING "Use SZip AEC from compressed file" FORCE) +set (USE_LIBAEC ON CACHE BOOL "Use libaec szip replacement" FORCE) set (CMAKE_BUILD_TYPE "Debug" CACHE STRING "Build Debug" FORCE) set (CTEST_CONFIGURATION_TYPE "Debug" CACHE STRING "Build Debug" FORCE) set (ZLIB_PACKAGE_NAME "zlib" CACHE STRING "Name of ZLIB package" FORCE) - +set (LIBAEC_PACKAGE_NAME "libaec" CACHE STRING "Name of AEC SZIP package" FORCE) set (SZIP_PACKAGE_NAME "szip" CACHE STRING "Name of SZIP package" FORCE) diff --git a/config/cmake/scripts/CTestScript.cmake b/config/cmake/scripts/CTestScript.cmake index 3c85d48..e3659f6 100755 --- a/config/cmake/scripts/CTestScript.cmake +++ b/config/cmake/scripts/CTestScript.cmake @@ -9,7 +9,7 @@ # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) ######################################################## # This dashboard is maintained by The HDF Group # For any comments please contact cdashhelp@hdfgroup.org @@ -253,6 +253,14 @@ endforeach () message (STATUS "Dashboard script configuration:\n${vars}\n") #----------------------------------------------------------------------------- + +################################################################### +######### Following is for submission to CDash ############ +################################################################### +if (NOT DEFINED MODEL) + set (MODEL "Experimental") +endif () + #----------------------------------------------------------------------------- ## NORMAL process ## -- LOCAL_UPDATE updates the source folder from svn diff --git a/config/cmake/scripts/HDF5config.cmake b/config/cmake/scripts/HDF5config.cmake index 61c88dc..0bbd3b9 100755 --- a/config/cmake/scripts/HDF5config.cmake +++ b/config/cmake/scripts/HDF5config.cmake @@ -15,12 +15,13 @@ ### ctest -S HDF5config.cmake,BUILD_GENERATOR=VS201764 -C Release -VV -O hdf5.log ### ############################################################################################# -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) ############################################################################ # Usage: # ctest -S HDF5config.cmake,OPTION=VALUE -C Release -VV -O test.log # where valid options for OPTION are: # BUILD_GENERATOR - The cmake build generator: +# MinGW * MinGW Makefiles # Unix * Unix Makefiles # VS2019 * Visual Studio 16 2019 # VS201964 * Visual Studio 16 2019 @@ -36,15 +37,15 @@ cmake_minimum_required (VERSION 3.10) # CTEST_SOURCE_NAME - source folder ############################################################################## -set (CTEST_SOURCE_VERSION "1.10.6") +set (CTEST_SOURCE_VERSION "1.10.7") set (CTEST_SOURCE_VERSEXT "") ############################################################################## # handle input parameters to script. #BUILD_GENERATOR - which CMake generator to use, required -#INSTALLDIR - HDF5-1.10.0 root folder +#INSTALLDIR - HDF5-1.10.x root folder #CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo -#CTEST_SOURCE_NAME - name of source folder; HDF5-1.10.0 +#CTEST_SOURCE_NAME - name of source folder; HDF5-1.10.x #MODEL - CDash group name #HPC - run alternate configurations for HPC machines; sbatch, bsub, raybsub, qsub #MPI - enable MPI @@ -167,7 +168,11 @@ if (NOT DEFINED HPC) ## Set the following to unique id your computer ## set (CTEST_SITE "WIN7${BUILD_GENERATOR}.XXXX") else () - set (CTEST_CMAKE_GENERATOR "Unix Makefiles") + if (MINGW) + set (CTEST_CMAKE_GENERATOR "MinGW Makefiles") + else () + set (CTEST_CMAKE_GENERATOR "Unix Makefiles") + endif () ## Set the following to unique id your computer ## if (APPLE) set (CTEST_SITE "MAC.XXXX") @@ -180,14 +185,6 @@ if (NOT DEFINED HPC) set (ENV{CC} "${XCODE_CC}") set (ENV{CXX} "${XCODE_CXX}") set (CTEST_USE_LAUNCHERS 1) - set (RR_WARNINGS_COMMON "-Wno-format-nonliteral -Wno-cast-align -Wno-unused -Wno-unused-variable -Wno-unused-function -Wno-self-assign -Wno-unused-parameter -Wno-sign-compare") - set (RR_WARNINGS_C "${RR_WARNINGS_COMMON} -Wno-deprecated-declarations -Wno-uninitialized") - set (RR_WARNINGS_CXX "${RR_WARNINGS_COMMON} -Woverloaded-virtual -Wshadow -Wwrite-strings -Wc++11-compat") - set (RR_FLAGS_COMMON "-g -O0 -fstack-protector-all -D_FORTIFY_SOURCE=2") - set (RR_FLAGS_C "${RR_FLAGS_COMMON}") - set (RR_FLAGS_CXX "${RR_FLAGS_COMMON}") - set (ENV{CFLAGS} "${RR_WARNINGS_C} ${RR_FLAGS_C}") - set (ENV{CXXFLAGS} "${RR_WARNINGS_CXX} ${RR_FLAGS_CXX}") endif () endif () else () @@ -197,15 +194,6 @@ endif () ################################################################### ################################################################### -######### Following is for submission to CDash ############ -################################################################### -if (NOT DEFINED MODEL) - set (MODEL "Experimental") -endif () - -################################################################### - -################################################################### ##### Following controls CDash submission ##### #set (LOCAL_SUBMIT "TRUE") ##### Following controls test process ##### @@ -217,7 +205,7 @@ endif () ##### Following controls source update ##### #set (LOCAL_UPDATE "TRUE") set (REPOSITORY_URL "https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5.git") -set (REPOSITORY_BRANCH "hdf5_1_10_6") +set (REPOSITORY_BRANCH "hdf5_1_10") #uncomment to use a compressed source file: *.tar on linux or mac *.zip on windows #set(CTEST_USE_TAR_SOURCE "${CTEST_SOURCE_VERSION}") diff --git a/config/cmake/scripts/HDF5options.cmake b/config/cmake/scripts/HDF5options.cmake index 94aafac..bd18604 100755 --- a/config/cmake/scripts/HDF5options.cmake +++ b/config/cmake/scripts/HDF5options.cmake @@ -67,7 +67,7 @@ set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ALLOW_EXTERNAL_SUPPORT:STRIN #set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_ENABLE_SZIP_ENCODING:BOOL=OFF") #### package examples #### -#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACK_EXAMPLES:BOOL=ON -DHDF5_EXAMPLES_COMPRESSED:STRING=HDF5Examples-1.10.13-Source.tar.gz -DHDF5_EXAMPLES_COMPRESSED_DIR:PATH=${CTEST_SCRIPT_DIRECTORY}") +#set (ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACK_EXAMPLES:BOOL=ON -DHDF5_EXAMPLES_COMPRESSED:STRING=HDF5Examples-1.10.15-Source.tar.gz -DHDF5_EXAMPLES_COMPRESSED_DIR:PATH=${CTEST_SCRIPT_DIRECTORY}") ############################################################################################# ### enable parallel builds diff --git a/config/cmake/userblockTest.cmake b/config/cmake/userblockTest.cmake index c9fc36f..c02669d 100644 --- a/config/cmake/userblockTest.cmake +++ b/config/cmake/userblockTest.cmake @@ -54,7 +54,7 @@ if (TEST_CHECKUB STREQUAL "YES") # 'tellub' calls H5Fget_user_block to get the size # of the user block #s2=`$JAM_BIN/tellub $origfile` - EXECUTE_PROCESS ( + execute_process ( COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_OFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT @@ -72,7 +72,7 @@ if (TEST_CHECKUB STREQUAL "YES") if (TEST_O_STRING_LEN) #$JAM_BIN/getub -c $s2 $origfile > $cmpfile - EXECUTE_PROCESS ( + execute_process ( COMMAND ${TEST_EMULATOR} ${TEST_GET_PROGRAM} -c ${TEST_O_STRING_LEN} ${TEST_OFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT @@ -90,7 +90,7 @@ if (TEST_CHECKUB STREQUAL "YES") endif () #$JAM_BIN/getub -c $size $hfile > $tfile - EXECUTE_PROCESS ( + execute_process ( COMMAND ${TEST_EMULATOR} ${TEST_GET_PROGRAM} -c ${TEST_STRING_SIZE} ${TEST_HFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_RESULT @@ -101,8 +101,8 @@ if (TEST_CHECKUB STREQUAL "YES") ) # now compare the outputs - EXECUTE_PROCESS ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_HFILE}-ub.cmp ${TEST_HFILE}.cmp + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_HFILE}-ub.cmp ${TEST_HFILE}.cmp RESULT_VARIABLE TEST_RESULT ) @@ -114,7 +114,7 @@ if (TEST_CHECKUB STREQUAL "YES") else () # call 'ubsize' to get the size of the user block #ubsize=`$JAM_BIN/tellub $hfile` - EXECUTE_PROCESS ( + execute_process ( COMMAND ${TEST_EMULATOR} ${TEST_PROGRAM} ${TEST_HFILE} WORKING_DIRECTORY ${TEST_FOLDER} RESULT_VARIABLE TEST_H_STRING_LEN diff --git a/config/cmake/vfdTest.cmake b/config/cmake/vfdTest.cmake index 12ee40b..c07d005 100644 --- a/config/cmake/vfdTest.cmake +++ b/config/cmake/vfdTest.cmake @@ -64,7 +64,7 @@ if (NOT TEST_RESULT EQUAL TEST_EXPECT) if (NOT TEST_NOERRDISPLAY) if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out TEST_STREAM) - message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}") + message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}") endif () endif () message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != ${TEST_EXPECT}.\n${TEST_ERROR}") diff --git a/config/cmake/wait_H5Tinit.cmake b/config/cmake/wait_H5Tinit.cmake index c0b4d06..b778765 100644 --- a/config/cmake/wait_H5Tinit.cmake +++ b/config/cmake/wait_H5Tinit.cmake @@ -1,4 +1,4 @@ -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) message(STATUS "Check for existence of ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c") execute_process(COMMAND ls ${HDF5_GENERATED_SOURCE_DIR}/H5Tinit.c RESULT_VARIABLE H5TI_result OUTPUT_QUIET ERROR_QUIET) diff --git a/config/cmake_ext_mod/CTestCustom.cmake b/config/cmake_ext_mod/CTestCustom.cmake index 0111bef..2d72e8d 100644 --- a/config/cmake_ext_mod/CTestCustom.cmake +++ b/config/cmake_ext_mod/CTestCustom.cmake @@ -2,13 +2,14 @@ set (CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS 3000) set (CTEST_CUSTOM_WARNING_EXCEPTION ${CTEST_CUSTOM_WARNING_EXCEPTION} - "note.*expected.*void.*but argument is of type.*volatile" - "SZIP.src.*:[ \t]*warning" - "jpeg.src.*:[ \t]*warning" - "POSIX name for this item is deprecated" - "disabling jobserver mode" - "warning.*implicit declaration of function" - "note: expanded from macro" + ".*note.*expected.*void.*but argument is of type.*volatile.*" + ".*src.SZIP.*:[ \t]*warning.*" + ".*src.ZLIB.*:[ \t]*warning.*" + ".*src.JPEG.*:[ \t]*warning.*" + ".*POSIX name for this item is deprecated.*" + ".*disabling jobserver mode.*" + ".*warning.*implicit declaration of function.*" + ".*note: expanded from macro.*" ) set (CTEST_CUSTOM_MEMCHECK_IGNORE diff --git a/config/cmake_ext_mod/ConfigureChecks.cmake b/config/cmake_ext_mod/ConfigureChecks.cmake index 52cb7dd..0ddb6d0 100644 --- a/config/cmake_ext_mod/ConfigureChecks.cmake +++ b/config/cmake_ext_mod/ConfigureChecks.cmake @@ -20,6 +20,7 @@ include (CheckSymbolExists) include (CheckTypeSize) include (CheckVariableExists) include (TestBigEndian) +include (CheckStructHasMember) #----------------------------------------------------------------------------- # APPLE/Darwin setup @@ -136,15 +137,11 @@ CHECK_INCLUDE_FILE_CONCAT ("stddef.h" ${HDF_PREFIX}_HAVE_STDDEF_H) CHECK_INCLUDE_FILE_CONCAT ("stdint.h" ${HDF_PREFIX}_HAVE_STDINT_H) CHECK_INCLUDE_FILE_CONCAT ("unistd.h" ${HDF_PREFIX}_HAVE_UNISTD_H) -# Darwin -CHECK_INCLUDE_FILE_CONCAT ("mach/mach_time.h" ${HDF_PREFIX}_HAVE_MACH_MACH_TIME_H) - # Windows CHECK_INCLUDE_FILE_CONCAT ("io.h" ${HDF_PREFIX}_HAVE_IO_H) if (NOT CYGWIN) CHECK_INCLUDE_FILE_CONCAT ("winsock2.h" ${HDF_PREFIX}_HAVE_WINSOCK2_H) endif () -CHECK_INCLUDE_FILE_CONCAT ("sys/timeb.h" ${HDF_PREFIX}_HAVE_SYS_TIMEB_H) if (CMAKE_SYSTEM_NAME MATCHES "OSF") CHECK_INCLUDE_FILE_CONCAT ("sys/sysinfo.h" ${HDF_PREFIX}_HAVE_SYS_SYSINFO_H) @@ -165,6 +162,8 @@ CHECK_INCLUDE_FILE_CONCAT ("memory.h" ${HDF_PREFIX}_HAVE_MEMORY_H) CHECK_INCLUDE_FILE_CONCAT ("dlfcn.h" ${HDF_PREFIX}_HAVE_DLFCN_H) CHECK_INCLUDE_FILE_CONCAT ("inttypes.h" ${HDF_PREFIX}_HAVE_INTTYPES_H) CHECK_INCLUDE_FILE_CONCAT ("netinet/in.h" ${HDF_PREFIX}_HAVE_NETINET_IN_H) +CHECK_INCLUDE_FILE_CONCAT ("netdb.h" ${HDF_PREFIX}_HAVE_NETDB_H) +CHECK_INCLUDE_FILE_CONCAT ("arpa/inet.h" ${HDF_PREFIX}_HAVE_ARPA_INET_H) # _Bool type support CHECK_INCLUDE_FILE_CONCAT (stdbool.h ${HDF_PREFIX}_HAVE_STDBOOL_H) @@ -273,11 +272,11 @@ if (MINGW OR NOT WINDOWS) # systems. # POSIX feature information can be found in the gcc manual at: # http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html - set (HDF_EXTRA_C_FLAGS -D_POSIX_C_SOURCE=200112L) + set (HDF_EXTRA_C_FLAGS -D_POSIX_C_SOURCE=200809L) # Need to add this so that O_DIRECT is visible for the direct # VFD on Linux systems. - set (HDF_EXTRA_C_FLAGS -D_GNU_SOURCE) + set (HDF_EXTRA_C_FLAGS ${HDF_EXTRA_C_FLAGS} -D_GNU_SOURCE) option (HDF_ENABLE_LARGE_FILE "Enable support for large (64-bit) files on Linux." ON) if (HDF_ENABLE_LARGE_FILE AND NOT DEFINED TEST_LFS_WORKS_RUN) @@ -328,7 +327,7 @@ if (MINGW OR NOT WINDOWS) CHECK_FUNCTION_EXISTS (fseeko ${HDF_PREFIX}_HAVE_FSEEKO) - HDF_FUNCTION_TEST (HAVE_STAT64_STRUCT) + CHECK_STRUCT_HAS_MEMBER("struct stat64" st_blocks "sys/types.h;sys/stat.h" HAVE_STAT64_STRUCT) if (HAVE_STAT64_STRUCT) CHECK_FUNCTION_EXISTS (stat64 ${HDF_PREFIX}_HAVE_STAT64) endif () @@ -438,14 +437,18 @@ if (MINGW OR NOT WINDOWS) #----------------------------------------------------------------------------- # Check a bunch of time functions #----------------------------------------------------------------------------- + CHECK_STRUCT_HAS_MEMBER("struct tm" tm_gmtoff "time.h" ${HDF_PREFIX}_HAVE_TM_GMTOFF) + CHECK_STRUCT_HAS_MEMBER("struct tm" __tm_gmtoff "time.h" ${HDF_PREFIX}_HAVE___TM_GMTOFF) + CHECK_STRUCT_HAS_MEMBER("struct tm" tm_sec "sys/types.h;sys/time.h;time.h" ${HDF_PREFIX}_TIME_WITH_SYS_TIME) + if (${HDF_PREFIX}_HAVE_SYS_TIME_H) + CHECK_STRUCT_HAS_MEMBER("struct tm" tz_minuteswest "sys/types.h;sys/time.h;time.h" ${HDF_PREFIX}_HAVE_STRUCT_TIMEZONE) + else () + CHECK_STRUCT_HAS_MEMBER("struct tm" tz_minuteswest "sys/types.h;time.h" ${HDF_PREFIX}_HAVE_STRUCT_TIMEZONE) + endif () CHECK_FUNCTION_EXISTS (gettimeofday ${HDF_PREFIX}_HAVE_GETTIMEOFDAY) foreach (time_test - HAVE_TM_GMTOFF - HAVE___TM_GMTOFF # HAVE_TIMEZONE - HAVE_STRUCT_TIMEZONE GETTIMEOFDAY_GIVES_TZ - TIME_WITH_SYS_TIME HAVE_TM_ZONE HAVE_STRUCT_TM_TM_ZONE ) @@ -453,20 +456,19 @@ if (MINGW OR NOT WINDOWS) endforeach () if (NOT CYGWIN AND NOT MINGW) HDF_FUNCTION_TEST (HAVE_TIMEZONE) -# HDF_FUNCTION_TEST (HAVE_STAT_ST_BLOCKS) endif () # ---------------------------------------------------------------------- # Does the struct stat have the st_blocks field? This field is not Posix. # - HDF_FUNCTION_TEST (HAVE_STAT_ST_BLOCKS) + CHECK_STRUCT_HAS_MEMBER("struct stat" st_blocks "sys/types.h;sys/stat.h" ${HDF_PREFIX}_HAVE_STAT_ST_BLOCKS) # ---------------------------------------------------------------------- # How do we figure out the width of a tty in characters? # CHECK_FUNCTION_EXISTS (ioctl ${HDF_PREFIX}_HAVE_IOCTL) - HDF_FUNCTION_TEST (HAVE_STRUCT_VIDEOCONFIG) - HDF_FUNCTION_TEST (HAVE_STRUCT_TEXT_INFO) + CHECK_STRUCT_HAS_MEMBER ("struct videoconfig" numtextcols "" ${HDF_PREFIX}_HAVE_STRUCT_VIDEOCONFIG) + CHECK_STRUCT_HAS_MEMBER ("struct text_info" screenwidth "" ${HDF_PREFIX}_HAVE_STRUCT_TEXT_INFO) CHECK_FUNCTION_EXISTS (_getvideoconfig ${HDF_PREFIX}_HAVE__GETVIDEOCONFIG) CHECK_FUNCTION_EXISTS (gettextinfo ${HDF_PREFIX}_HAVE_GETTEXTINFO) CHECK_FUNCTION_EXISTS (_scrsize ${HDF_PREFIX}_HAVE__SCRSIZE) diff --git a/config/cmake_ext_mod/FindSZIP.cmake b/config/cmake_ext_mod/FindSZIP.cmake index 2303d6d..8f882b4 100644 --- a/config/cmake_ext_mod/FindSZIP.cmake +++ b/config/cmake_ext_mod/FindSZIP.cmake @@ -51,7 +51,7 @@ find_path(SZIP_INCLUDE_DIR szlib.h) set(szip_names ${SZIP_NAMES} sz szip szip-static libsz libszip libszip-static) foreach(name ${szip_names}) - list(APPEND szip_names_debug "${name}d") + list (APPEND szip_names_debug "${name}d") endforeach() if(NOT SZIP_LIBRARY) diff --git a/config/cmake_ext_mod/HDFLibMacros.cmake b/config/cmake_ext_mod/HDFLibMacros.cmake index 9df2b4b..fe633bf 100644 --- a/config/cmake_ext_mod/HDFLibMacros.cmake +++ b/config/cmake_ext_mod/HDFLibMacros.cmake @@ -20,7 +20,7 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) GIT_TAG ${JPEG_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DJPEG_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DJPEG_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -39,7 +39,7 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DJPEG_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DJPEG_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -62,14 +62,6 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) add_dependencies (${HDF_PACKAGE_NAMESPACE}jpeg-static JPEG) set (JPEG_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}jpeg-static") set (JPEG_LIBRARIES ${JPEG_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target jpeg-shared - add_library(${HDF_PACKAGE_NAMESPACE}jpeg-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}jpeg-shared "jpeg" SHARED "") - add_dependencies (${HDF_PACKAGE_NAMESPACE}jpeg-shared JPEG) - set (JPEG_SHARED_LIBRARY "${HDF_PACKAGE_NAMESPACE}jpeg-shared") - set (JPEG_LIBRARIES ${JPEG_LIBRARIES} ${JPEG_SHARED_LIBRARY}) - endif () set (JPEG_INCLUDE_DIR_GEN "${BINARY_DIR}") set (JPEG_INCLUDE_DIR "${SOURCE_DIR}/src") @@ -97,7 +89,7 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) GIT_TAG ${SZIP_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DSZIP_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DSZIP_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -117,7 +109,7 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DSZIP_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DSZIP_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -134,21 +126,23 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) endif () externalproject_get_property (SZIP BINARY_DIR SOURCE_DIR) -##include (${BINARY_DIR}/${SZIP_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) +##include (${BINARY_DIR}/${SZ_PACKAGE_NAME}${HDF_PACKAGE_EXT}-targets.cmake) # Create imported target szip-static - add_library(${HDF_PACKAGE_NAMESPACE}szip-static STATIC IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}szip-static "szip" STATIC "") - add_dependencies (${HDF_PACKAGE_NAMESPACE}szip-static SZIP) - set (SZIP_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}szip-static") - set (SZIP_LIBRARIES ${SZIP_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target szip-shared - add_library(${HDF_PACKAGE_NAMESPACE}szip-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}szip-shared "szip" SHARED "") - add_dependencies (${HDF_PACKAGE_NAMESPACE}szip-shared SZIP) - set (SZIP_SHARED_LIBRARY "${HDF_PACKAGE_NAMESPACE}szip-shared") - set (SZIP_LIBRARIES ${SZIP_LIBRARIES} ${SZIP_SHARED_LIBRARY}) + if (USE_LIBAEC) + add_library(${HDF_PACKAGE_NAMESPACE}sz-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}sz-static "sz" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}sz-static SZIP) + add_library(${HDF_PACKAGE_NAMESPACE}aec-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}aec-static "aec" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}aec-static SZIP) + set (SZIP_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}sz-static;${HDF_PACKAGE_NAMESPACE}aec-static") + else () + add_library(${HDF_PACKAGE_NAMESPACE}szip-static STATIC IMPORTED) + HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}szip-static "szip" STATIC "") + add_dependencies (${HDF_PACKAGE_NAMESPACE}szip-static SZIP) + set (SZIP_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}szip-static") endif () + set (SZIP_LIBRARIES ${SZIP_STATIC_LIBRARY}) set (SZIP_INCLUDE_DIR_GEN "${BINARY_DIR}") set (SZIP_INCLUDE_DIR "${SOURCE_DIR}/src") @@ -158,11 +152,15 @@ endmacro () #------------------------------------------------------------------------------- macro (PACKAGE_SZIP_LIBRARY compress_type) + set (SZIP_HDR "SZconfig") + if (USE_LIBAEC) + set (SZIP_HDR "libaec_Export") + endif () add_custom_target (SZIP-GenHeader-Copy ALL - COMMAND ${CMAKE_COMMAND} -E copy_if_different ${SZIP_INCLUDE_DIR_GEN}/SZconfig.h ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/ - COMMENT "Copying ${SZIP_INCLUDE_DIR_GEN}/SZconfig.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" + COMMAND ${CMAKE_COMMAND} -E copy_if_different ${SZIP_INCLUDE_DIR_GEN}/${SZIP_HDR}.h ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/ + COMMENT "Copying ${SZIP_INCLUDE_DIR_GEN}/${SZIP_HDR}.h to ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/" ) - set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/SZconfig.h) + set (EXTERNAL_HEADER_LIST ${EXTERNAL_HEADER_LIST} ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${SZIP_HDR}.h) if (${compress_type} MATCHES "GIT" OR ${compress_type} MATCHES "TGZ") add_dependencies (SZIP-GenHeader-Copy SZIP) endif () @@ -176,7 +174,7 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) GIT_TAG ${ZLIB_BRANCH} INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DZLIB_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DZLIB_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -195,7 +193,7 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) URL_MD5 "" INSTALL_COMMAND "" CMAKE_ARGS - -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} + -DBUILD_SHARED_LIBS:BOOL=OFF -DZLIB_PACKAGE_EXT:STRING=${HDF_PACKAGE_EXT} -DZLIB_EXTERNALLY_CONFIGURED:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE} @@ -224,14 +222,6 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) add_dependencies (${HDF_PACKAGE_NAMESPACE}zlib-static ZLIB) set (ZLIB_STATIC_LIBRARY "${HDF_PACKAGE_NAMESPACE}zlib-static") set (ZLIB_LIBRARIES ${ZLIB_STATIC_LIBRARY}) - if (BUILD_SHARED_LIBS) - # Create imported target zlib-shared - add_library(${HDF_PACKAGE_NAMESPACE}zlib-shared SHARED IMPORTED) - HDF_IMPORT_SET_LIB_OPTIONS (${HDF_PACKAGE_NAMESPACE}zlib-shared ${ZLIB_LIB_NAME} SHARED "") - add_dependencies (${HDF_PACKAGE_NAMESPACE}zlib-shared ZLIB) - set (ZLIB_SHARED_LIBRARY "${HDF_PACKAGE_NAMESPACE}zlib-shared") - set (ZLIB_LIBRARIES ${ZLIB_LIBRARIES} ${ZLIB_SHARED_LIBRARY}) - endif () set (ZLIB_INCLUDE_DIR_GEN "${BINARY_DIR}") set (ZLIB_INCLUDE_DIR "${SOURCE_DIR}") diff --git a/config/cmake_ext_mod/HDFMacros.cmake b/config/cmake_ext_mod/HDFMacros.cmake index d1d9a6c..5740740 100644 --- a/config/cmake_ext_mod/HDFMacros.cmake +++ b/config/cmake_ext_mod/HDFMacros.cmake @@ -82,10 +82,8 @@ macro (INSTALL_TARGET_PDB libtarget targetdestination targetcomponent) set (targetfilename $<TARGET_FILE_DIR:${libtarget}>/${target_name}.pdb) endif () install ( - FILES - ${targetfilename} - DESTINATION - ${targetdestination} + FILES ${targetfilename} + DESTINATION ${targetdestination} CONFIGURATIONS Debug RelWithDebInfo COMPONENT ${targetcomponent} OPTIONAL @@ -97,10 +95,8 @@ endmacro () macro (INSTALL_PROGRAM_PDB progtarget targetdestination targetcomponent) if (WIN32 AND MSVC) install ( - FILES - $<TARGET_PDB_FILE:${progtarget}> - DESTINATION - ${targetdestination} + FILES $<TARGET_PDB_FILE:${progtarget}> + DESTINATION ${targetdestination} CONFIGURATIONS Debug RelWithDebInfo COMPONENT ${targetcomponent} OPTIONAL @@ -123,18 +119,12 @@ macro (HDF_SET_LIB_OPTIONS libtarget libname libtype) endif () endif () - set_target_properties (${libtarget} - PROPERTIES - OUTPUT_NAME - ${LIB_RELEASE_NAME} -# OUTPUT_NAME_DEBUG -# ${LIB_DEBUG_NAME} - OUTPUT_NAME_RELEASE - ${LIB_RELEASE_NAME} - OUTPUT_NAME_MINSIZEREL - ${LIB_RELEASE_NAME} - OUTPUT_NAME_RELWITHDEBINFO - ${LIB_RELEASE_NAME} + set_target_properties (${libtarget} PROPERTIES + OUTPUT_NAME ${LIB_RELEASE_NAME} +# OUTPUT_NAME_DEBUG ${LIB_DEBUG_NAME} + OUTPUT_NAME_RELEASE ${LIB_RELEASE_NAME} + OUTPUT_NAME_MINSIZEREL ${LIB_RELEASE_NAME} + OUTPUT_NAME_RELWITHDEBINFO ${LIB_RELEASE_NAME} ) #get_property (target_name TARGET ${libtarget} PROPERTY OUTPUT_NAME) #get_property (target_name_debug TARGET ${libtarget} PROPERTY OUTPUT_NAME_DEBUG) @@ -143,8 +133,7 @@ macro (HDF_SET_LIB_OPTIONS libtarget libname libtype) if (${libtype} MATCHES "STATIC") if (WIN32) - set_target_properties (${libtarget} - PROPERTIES + set_target_properties (${libtarget} PROPERTIES COMPILE_PDB_NAME_DEBUG ${LIB_DEBUG_NAME} COMPILE_PDB_NAME_RELEASE ${LIB_RELEASE_NAME} COMPILE_PDB_NAME_MINSIZEREL ${LIB_RELEASE_NAME} @@ -156,8 +145,7 @@ macro (HDF_SET_LIB_OPTIONS libtarget libname libtype) #----- Use MSVC Naming conventions for Shared Libraries if (MINGW AND ${libtype} MATCHES "SHARED") - set_target_properties (${libtarget} - PROPERTIES + set_target_properties (${libtarget} PROPERTIES IMPORT_SUFFIX ".lib" IMPORT_PREFIX "" PREFIX "" @@ -441,3 +429,21 @@ macro (HDF_DIR_PATHS package_prefix) endif () endmacro () +macro (ADD_H5_FLAGS h5_flag_var infile) + file (STRINGS ${infile} TEST_FLAG_STREAM) + #message (STATUS "TEST_FLAG_STREAM=${TEST_FLAG_STREAM}") + list (LENGTH TEST_FLAG_STREAM len_flag) + if (len_flag GREATER 0) + math (EXPR _FP_LEN "${len_flag} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET TEST_FLAG_STREAM ${line} str_flag) + string (REGEX REPLACE "^#.*" "" str_flag "${str_flag}") + #message (STATUS "str_flag=${str_flag}") + if (str_flag) + list (APPEND ${h5_flag_var} "${str_flag}") + endif () + endforeach () + endif () + #message (STATUS "h5_flag_var=${${h5_flag_var}}") +endmacro () + diff --git a/config/cmake_ext_mod/HDFTests.c b/config/cmake_ext_mod/HDFTests.c index 0b9b530..31a568a 100644 --- a/config/cmake_ext_mod/HDFTests.c +++ b/config/cmake_ext_mod/HDFTests.c @@ -88,25 +88,6 @@ int main(void) } #endif - -#ifdef TIME_WITH_SYS_TIME -/* Time with sys/time test */ - -#include <sys/types.h> -#include <sys/time.h> -#include <time.h> - -int -main () -{ -if ((struct tm *) 0) -return 0; - ; - return 0; -} - -#endif - #ifdef STDC_HEADERS #include <stdlib.h> #include <stdarg.h> @@ -162,26 +143,6 @@ main () #endif /* HAVE_FUNCTION */ -#ifdef HAVE_TM_GMTOFF - -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct tm tm; tm.tm_gmtoff=0); - -#endif /* HAVE_TM_GMTOFF */ - -#ifdef HAVE___TM_GMTOFF - -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct tm tm; tm.__tm_gmtoff=0); - -#endif /* HAVE_TM___GMTOFF */ - #ifdef HAVE_TIMEZONE #ifdef HAVE_SYS_TIME_H @@ -192,24 +153,6 @@ SIMPLE_TEST(timezone=0); #endif /* HAVE_TIMEZONE */ -#ifdef HAVE_STRUCT_TIMEZONE - -#include <sys/types.h> -#ifdef HAVE_SYS_TIME_H -#include <sys/time.h> -#endif -#include <time.h> -SIMPLE_TEST(struct timezone tz; tz.tz_minuteswest=0); - -#endif /* HAVE_STRUCT_TIMEZONE */ - -#ifdef HAVE_STAT_ST_BLOCKS - -#include <sys/stat.h> -SIMPLE_TEST(struct stat sb; sb.st_blocks=0); - -#endif /* HAVE_STAT_ST_BLOCKS */ - #ifdef PRINTF_LL_WIDTH #ifdef HAVE_LONG_LONG @@ -319,16 +262,6 @@ int main() } #endif -#ifdef HAVE_STAT64_STRUCT -#include <sys/types.h> -#include <sys/stat.h>], -struct stat64 sb; -int main() -{ - return 0; -} -#endif - #ifdef TEST_DIRECT_VFD_WORKS #include <sys/types.h> #include <sys/stat.h> @@ -432,18 +365,6 @@ int main () #endif /* HAVE_IOEO */ -#ifdef HAVE_STRUCT_VIDEOCONFIG - -SIMPLE_TEST(struct videoconfig w; w.numtextcols=0); - -#endif /* HAVE_STRUCT_VIDEOCONFIG */ - -#ifdef HAVE_STRUCT_TEXT_INFO - -SIMPLE_TEST(struct text_info w; w.screenwidth=0); - -#endif /* HAVE_STRUCT_TEXT_INFO */ - #if defined( HAVE_INLINE ) || defined( HAVE___INLINE__ ) || defined( HAVE___INLINE ) #ifndef __cplusplus #if defined( HAVE_INLINE ) diff --git a/config/cmake_ext_mod/HDFUseFortran.cmake b/config/cmake_ext_mod/HDFUseFortran.cmake index 1cce918..0a6a092 100644 --- a/config/cmake_ext_mod/HDFUseFortran.cmake +++ b/config/cmake_ext_mod/HDFUseFortran.cmake @@ -16,6 +16,11 @@ enable_language (Fortran) set (HDF_PREFIX "H5") +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + include (CheckFortranSourceRuns) + include (CheckFortranSourceCompiles) +endif () + #------------------------------------------------------------------------------- # Fix Fortran flags if we are compiling staticly on Windows using # Windows_MT.cmake from config/cmake/UserMacros @@ -42,71 +47,15 @@ file (STRINGS ${CMAKE_BINARY_DIR}/FCMangle.h CONTENTS REGEX "H5_FC_GLOBAL_\\(.*, string (REGEX MATCH "H5_FC_GLOBAL_\\(.*,.*\\) +(.*)" RESULT ${CONTENTS}) set (H5_FC_FUNC_ "H5_FC_FUNC_(name,NAME) ${CMAKE_MATCH_1}") -#----------------------------------------------------------------------------- -# The provided CMake Fortran macros don't provide a general check function -# so this one is used for a sizeof test. -#----------------------------------------------------------------------------- -macro (CHECK_FORTRAN_FEATURE FUNCTION CODE VARIABLE) - message (STATUS "Testing Fortran ${FUNCTION}") - if (HDF5_REQUIRED_LIBRARIES) - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${HDF5_REQUIRED_LIBRARIES}") - else () - set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) - endif () - file (WRITE - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 - "${CODE}" - ) - TRY_COMPILE (RESULT_VAR - ${CMAKE_BINARY_DIR} - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 - CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" - OUTPUT_VARIABLE OUTPUT - ) - -# message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") -# message (STATUS "Test result ${OUTPUT}") -# message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - - if (${RESULT_VAR}) - set (${VARIABLE} 1 CACHE INTERNAL "Have Fortran function ${FUNCTION}") - message (STATUS "Testing Fortran ${FUNCTION} - OK") - file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log - "Determining if the Fortran ${FUNCTION} exists passed with the following output:\n" - "${OUTPUT}\n\n" - ) - else () - message (STATUS "Testing Fortran ${FUNCTION} - Fail") - set (${VARIABLE} 0 CACHE INTERNAL "Have Fortran function ${FUNCTION}") - file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log - "Determining if the Fortran ${FUNCTION} exists failed with the following output:\n" - "${OUTPUT}\n\n") - endif () -endmacro () - -#----------------------------------------------------------------------------- -# Configure Checks which require Fortran compilation must go in here -# not in the main ConfigureChecks.cmake files, because if the user has -# no Fortran compiler, problems arise. -# -# Be careful with leading spaces here, do not remove them. -#----------------------------------------------------------------------------- - -# Check for Non-standard extension intrinsic function SIZEOF -set (${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF FALSE) -CHECK_FORTRAN_FEATURE(sizeof +#test code source +set (SIZEOF_CODE " PROGRAM main i = sizeof(x) END PROGRAM " - ${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF ) - -# Check for F2008 standard intrinsic function C_SIZEOF -set (${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF FALSE) -CHECK_FORTRAN_FEATURE(c_sizeof +set (C_SIZEOF_CODE " PROGRAM main USE ISO_C_BINDING @@ -115,11 +64,8 @@ CHECK_FORTRAN_FEATURE(c_sizeof result = c_sizeof(a) END PROGRAM " - ${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF ) - -# Check for F2008 standard intrinsic function STORAGE_SIZE -CHECK_FORTRAN_FEATURE(storage_size +set (STORAGE_SIZE_CODE " PROGRAM main INTEGER :: a @@ -127,22 +73,15 @@ CHECK_FORTRAN_FEATURE(storage_size result = storage_size(a) END PROGRAM " - ${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE ) - -# Check for F2008 standard intrinsic module "ISO_FORTRAN_ENV" -set (${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV FALSE) -CHECK_FORTRAN_FEATURE(ISO_FORTRAN_ENV +set (ISO_FORTRAN_ENV_CODE " PROGRAM main USE, INTRINSIC :: ISO_FORTRAN_ENV END PROGRAM " - ${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV ) - -set (${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE FALSE) -CHECK_FORTRAN_FEATURE(RealIsNotDouble +set (REALISNOTDOUBLE_CODE " MODULE type_mod INTERFACE h5t @@ -165,14 +104,8 @@ CHECK_FORTRAN_FEATURE(RealIsNotDouble CALL h5t(d) END PROGRAM main " - ${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE ) - -#----------------------------------------------------------------------------- -# Checks if the ISO_C_BINDING module meets all the requirements -#----------------------------------------------------------------------------- -set (${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING FALSE) -CHECK_FORTRAN_FEATURE(iso_c_binding +set (ISO_C_BINDING_CODE " PROGRAM main USE iso_c_binding @@ -184,9 +117,95 @@ CHECK_FORTRAN_FEATURE(iso_c_binding ptr = C_LOC(ichr(1:1)) END PROGRAM " - ${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING ) +if (NOT CMAKE_VERSION VERSION_LESS "3.14.0") + if (HDF5_REQUIRED_LIBRARIES) + set (CMAKE_REQUIRED_LIBRARIES "${HDF5_REQUIRED_LIBRARIES}") + endif () + check_fortran_source_compiles (${SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF SRC_EXT f90) + check_fortran_source_compiles (${C_SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF SRC_EXT f90) + check_fortran_source_compiles (${STORAGE_SIZE_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE SRC_EXT f90) + check_fortran_source_compiles (${ISO_FORTRAN_ENV_CODE} ${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV SRC_EXT f90) + check_fortran_source_compiles (${REALISNOTDOUBLE_CODE} ${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE SRC_EXT f90) + check_fortran_source_compiles (${ISO_C_BINDING_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING SRC_EXT f90) +else () + #----------------------------------------------------------------------------- + # The provided CMake Fortran macros don't provide a general check function + # so this one is used for a sizeof test. + #----------------------------------------------------------------------------- + macro (CHECK_FORTRAN_FEATURE FUNCTION CODE VARIABLE) + message (STATUS "Testing Fortran ${FUNCTION}") + if (HDF5_REQUIRED_LIBRARIES) + set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES + "-DLINK_LIBRARIES:STRING=${HDF5_REQUIRED_LIBRARIES}") + else () + set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES) + endif () + file (WRITE + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 + "${CODE}" + ) + TRY_COMPILE (RESULT_VAR + ${CMAKE_BINARY_DIR} + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f90 + CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" + OUTPUT_VARIABLE OUTPUT + ) + + # message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + # message (STATUS "Test result ${OUTPUT}") + # message (STATUS "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") + + if (${RESULT_VAR}) + set (${VARIABLE} 1 CACHE INTERNAL "Have Fortran function ${FUNCTION}") + message (STATUS "Testing Fortran ${FUNCTION} - OK") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + "Determining if the Fortran ${FUNCTION} exists passed with the following output:\n" + "${OUTPUT}\n\n" + ) + else () + message (STATUS "Testing Fortran ${FUNCTION} - Fail") + set (${VARIABLE} 0 CACHE INTERNAL "Have Fortran function ${FUNCTION}") + file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + "Determining if the Fortran ${FUNCTION} exists failed with the following output:\n" + "${OUTPUT}\n\n") + endif () + endmacro () + + #----------------------------------------------------------------------------- + # Configure Checks which require Fortran compilation must go in here + # not in the main ConfigureChecks.cmake files, because if the user has + # no Fortran compiler, problems arise. + # + # Be careful with leading spaces here, do not remove them. + #----------------------------------------------------------------------------- + + # Check for Non-standard extension intrinsic function SIZEOF + set (${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF FALSE) + CHECK_FORTRAN_FEATURE(sizeof_code ${SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_SIZEOF) + + # Check for F2008 standard intrinsic function C_SIZEOF + set (${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF FALSE) + CHECK_FORTRAN_FEATURE(c_sizeof_code ${C_SIZEOF_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_C_SIZEOF) + + # Check for F2008 standard intrinsic function STORAGE_SIZE + CHECK_FORTRAN_FEATURE(storage_size_code ${STORAGE_SIZE_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_STORAGE_SIZE) + + # Check for F2008 standard intrinsic module "ISO_FORTRAN_ENV" + set (${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV FALSE) + CHECK_FORTRAN_FEATURE(iso_fortran_env_code ${ISO_FORTRAN_ENV_CODE} ${HDF_PREFIX}_HAVE_ISO_FORTRAN_ENV) + + set (${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE FALSE) + CHECK_FORTRAN_FEATURE(realisnotdouble_code ${REALISNOTDOUBLE_CODE} ${HDF_PREFIX}_FORTRAN_DEFAULT_REAL_NOT_DOUBLE) + + #----------------------------------------------------------------------------- + # Checks if the ISO_C_BINDING module meets all the requirements + #----------------------------------------------------------------------------- + set (${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING FALSE) + CHECK_FORTRAN_FEATURE(iso_c_binding_code ${ISO_C_BINDING_CODE} ${HDF_PREFIX}_FORTRAN_HAVE_ISO_C_BINDING) +endif () + #----------------------------------------------------------------------------- # Add debug information (intel Fortran : JB) #----------------------------------------------------------------------------- diff --git a/config/cmake_ext_mod/grepTest.cmake b/config/cmake_ext_mod/grepTest.cmake index a6f1c7f..b011ae8 100644 --- a/config/cmake_ext_mod/grepTest.cmake +++ b/config/cmake_ext_mod/grepTest.cmake @@ -82,93 +82,102 @@ if (TEST_FIND_RESULT GREATER 0) endif () # if the TEST_ERRREF exists grep the error output with the error reference +set (TEST_ERRREF_RESULT 0) if (TEST_ERRREF) # if the .err file exists grep the error output with the error reference before comparing stdout if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_ERR_STREAM) - - # TEST_ERRREF should always be matched - string (REGEX MATCH "${TEST_ERRREF}" TEST_MATCH ${TEST_ERR_STREAM}) - string (COMPARE EQUAL "${TEST_ERRREF}" "${TEST_MATCH}" TEST_RESULT) - if (NOT TEST_RESULT) - message (FATAL_ERROR "Failed: The error output of ${TEST_PROGRAM} did not contain ${TEST_ERRREF}") + list (LENGTH TEST_ERR_STREAM test_len) + if (test_len GREATER 0) + # TEST_ERRREF should always be matched + string (REGEX MATCH "${TEST_ERRREF}" TEST_MATCH ${TEST_ERR_STREAM}) + string (COMPARE EQUAL "${TEST_ERRREF}" "${TEST_MATCH}" TEST_ERRREF_RESULT) + if (NOT TEST_ERRREF_RESULT) + message (FATAL_ERROR "Failed: The error output of ${TEST_PROGRAM} did not contain ${TEST_ERRREF}") + endif () endif () endif () #always compare output file to reference unless this must be skipped + set (TEST_COMPARE_RESULT 0) if (NOT TEST_SKIP_COMPARE) if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") - if (WIN32 OR MINGW) - configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) - if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") - file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") endif () - #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") - endif () - if (NOT TEST_SORT_COMPARE) - # now compare the output with the reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} - RESULT_VARIABLE TEST_RESULT - ) - else () - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) - list (SORT v1) - list (SORT v2) - if (NOT v1 STREQUAL v2) - set(TEST_RESULT 1) + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () endif () - endif () - if (TEST_RESULT) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) - list (LENGTH test_ref len_ref) - if (len_act GREATER 0 AND len_ref GREATER 0) - math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT str_act STREQUAL str_ref) - if (str_act) - set (TEST_RESULT 1) - message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () - endforeach () - else () - if (len_act EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if (len_ref EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) endif () endif () - if (NOT len_act EQUAL len_ref) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") # again, if return value is !=0 scream and shout - if (TEST_RESULT) + if (TEST_COMPARE_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () endif () endif () else () # else grep the output with the reference + set (TEST_GREP_RESULT 0) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) # TEST_REFERENCE should always be matched string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) - string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if (NOT TEST_RESULT) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") endif () endif () @@ -178,8 +187,8 @@ if (TEST_FILTER) string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) if (TEST_EXPECT) # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match - string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (TEST_RESULT) + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") endif () endif () diff --git a/config/cmake_ext_mod/runTest.cmake b/config/cmake_ext_mod/runTest.cmake index 0c4a5a0..2b8b6b0 100644 --- a/config/cmake_ext_mod/runTest.cmake +++ b/config/cmake_ext_mod/runTest.cmake @@ -90,18 +90,21 @@ message (STATUS "COMMAND Result: ${TEST_RESULT}") # if the .err file exists and ERRROR_APPEND is enabled if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) - if (TEST_MASK_FILE) - STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") - endif () - # remove special output - string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () + # remove special output + string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") - if (NOT ERROR_APPEND) - # write back to original .err file - file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") - else () - # append error output to the stdout output file - file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () endif () endif () @@ -160,7 +163,7 @@ endif () # if the output file needs Modified text removed if (TEST_MASK_MOD) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) - string (REGEX REPLACE "Modified:[^\n]+\n" "Modified: XXXX-XX-XX XX:XX:XX XXX\n" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "Modified:[^\n]+\n" "Modified: XXXX-XX-XX XX:XX:XX XXX\n" TEST_STREAM "${TEST_STREAM}") file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") endif () @@ -198,151 +201,164 @@ endif () if (TEST_REF_FILTER) #message (STATUS "TEST_REF_FILTER: ${TEST_APPEND}${TEST_REF_FILTER}") file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - STRING(REGEX REPLACE "${TEST_REF_APPEND}" "${TEST_REF_FILTER}" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "${TEST_REF_APPEND}" "${TEST_REF_FILTER}" TEST_STREAM "${TEST_STREAM}") file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") endif () # compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) if (NOT TEST_SKIP_COMPARE) if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") - if (WIN32 OR MINGW) - configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) - if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") - file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") endif () - #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) - #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") - endif () - if (NOT TEST_SORT_COMPARE) - # now compare the output with the reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} - RESULT_VARIABLE TEST_RESULT - ) - else () - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) - list (SORT v1) - list (SORT v2) - if (NOT v1 STREQUAL v2) - set(TEST_RESULT 1) + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () endif () - endif () - if (TEST_RESULT) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) - list (LENGTH test_ref len_ref) - if (len_act GREATER 0 AND len_ref GREATER 0) - math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT str_act STREQUAL str_ref) - if (str_act) - set (TEST_RESULT 1) - message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () - endforeach () - else () - if (len_act EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if (len_ref EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) endif () endif () - if (NOT len_act EQUAL len_ref) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") # again, if return value is !=0 scream and shout - if (TEST_RESULT) + if (TEST_COMPARE_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () endif () # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) if (TEST_ERRREF) - if (WIN32 OR MINGW) - configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) - if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") - file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") endif () - #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) - #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") - endif () - # now compare the error output with the error reference - execute_process ( - COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} - RESULT_VARIABLE TEST_RESULT - ) - if (TEST_RESULT) - set (TEST_RESULT 0) - file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) - list (LENGTH test_act len_act) - file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) - list (LENGTH test_ref len_ref) - math (EXPR _FP_LEN "${len_ref} - 1") - if (len_act GREATER 0 AND len_ref GREATER 0) + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${CMAKE_IGNORE_EOL} ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - foreach (line RANGE 0 ${_FP_LEN}) - list (GET test_act ${line} str_act) - list (GET test_ref ${line} str_ref) - if (NOT str_act STREQUAL str_ref) - if (str_act) - set (TEST_RESULT 1) - message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () - endforeach () - else () - if (len_act EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if (len_ref EQUAL 0) - message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) endif () endif () - if (NOT len_act EQUAL len_ref) - set (TEST_RESULT 1) - endif () endif () - message (STATUS "COMPARE Result: ${TEST_RESULT}") + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") # again, if return value is !=0 scream and shout - if (TEST_RESULT) + if (TEST_ERRREF_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () endif () +set (TEST_GREP_RESULT 0) if (TEST_GREP_COMPARE) # now grep the output with the reference file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list (LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () - # TEST_REFERENCE should always be matched - string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) - string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if (NOT TEST_RESULT) - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") - endif () - - string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) - if (TEST_EXPECT) - # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match - string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (TEST_RESULT) - message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () endif () endif () endif () diff --git a/config/commence.am b/config/commence.am index 5fe21a6..88afe32 100644 --- a/config/commence.am +++ b/config/commence.am @@ -44,15 +44,15 @@ LIBH5CPP_HL=$(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Install directories that automake doesn't know about docdir = $(exec_prefix)/doc -# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below -# has been removed. According to the official description of DESTDIR by Gnu at -# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is -# prepended to the normal and complete install path that it precedes for the -# purpose of installing in a temporary directory which is useful for building -# rpms and other packages. The '/' after ${DESTDIR} will be followed by another -# '/' at the beginning of the normal install path. When DESTDIR is empty the -# path then begins with '//', which is incorrect and causes problems at least for -# Cygwin. +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by Gnu at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with @@ -62,17 +62,17 @@ H5CC_PP=${DESTDIR}$(bindir)/h5pcc H5FC=${DESTDIR}$(bindir)/h5fc H5FC_PP=${DESTDIR}$(bindir)/h5pfc H5CPP=${DESTDIR}$(bindir)/h5c++ - + # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. -# AM_CFLAGS is an automake construct which should be used by Makefiles +# AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. -AM_CFLAGS=@AM_CFLAGS@ @H5_CFLAGS@ +AM_CFLAGS=@AM_CFLAGS@ @H5_CFLAGS@ @H5_ECFLAGS@ AM_FCFLAGS=@AM_FCFLAGS@ @H5_FCFLAGS@ -AM_CXXFLAGS=@AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_CXXFLAGS=@AM_CXXFLAGS@ @H5_CXXFLAGS@ @H5_ECXXFLAGS@ AM_CPPFLAGS=@AM_CPPFLAGS@ @H5_CPPFLAGS@ AM_LDFLAGS=@AM_LDFLAGS@ @H5_LDFLAGS@ diff --git a/config/conclude.am b/config/conclude.am index 6e96ba2..744677e 100644 --- a/config/conclude.am +++ b/config/conclude.am @@ -25,8 +25,8 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) -chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) -TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST) TEST_EXTENSIONS = .sh SH_LOG_COMPILER = $(SHELL) @@ -131,28 +131,37 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================" > $${log}; \ fi; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log}; \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ else \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ fi; \ elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log};\ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log};\ else \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" >> $${log};\ fi; \ else \ - echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "Testing: $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log}; \ + echo "Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ else \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + echo "Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ fi; \ fi; \ if test -n "$(REALTIMEOUTPUT)"; then \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" | tee -a $${log}; \ + fi; \ + else \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ echo "============================" | tee -a $${log}; \ else \ echo "============================" >> $${log}; \ @@ -183,7 +192,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ fi; \ fi - + # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. diff --git a/config/examples.am b/config/examples.am index 247dfa8..e06f4ea 100644 --- a/config/examples.am +++ b/config/examples.am @@ -33,7 +33,7 @@ ## INSTALL_TOP_FILES ## ## EXAMPLEDIR -## The directory into which examples should be installed. +## The directory into which examples should be installed. ## ## Build rules for $(EXTRA_PROG). ## Dependencies for example programs. @@ -62,7 +62,7 @@ install-data-local: uninstall-local: @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples -install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) +install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) @for f in X $(INSTALL_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \ @@ -109,7 +109,7 @@ installcheck-local: H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \ else \ $(MAKE) $(AM_MAKEFLAGS) check; \ - fi + fi @if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \ echo "============================"; \ echo "Testing $(TEST_EXAMPLES_SCRIPT)"; \ diff --git a/config/gnu-cxxflags b/config/gnu-cxxflags index e0f2999..44cbc69 100644 --- a/config/gnu-cxxflags +++ b/config/gnu-cxxflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,46 +17,80 @@ # if the compiler is not GNU; otherwise `cxx_flags_set' is set to `yes' # +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for g++ # unless a compiler version is already known # # cxx_vendor: The compiler name: g++ # cxx_version: Version number: 2.91.60, 2.7.2.1 # -if test X = "X$cxx_flags_set"; then +if test "X-" = "X-$cxx_flags_set"; then # PathScale compiler spits out gcc version string too. Need to # filter it out. # icc beginning with version 12 includes a "gcc version compatiblilty" - # string, causing the gcc H5_CFLAGS to be erroneously added. The line + # string, causing the gcc H5_CXXFLAGS to be erroneously added. The line # "grep -v 'icc version'" causes the discarding of any output - # containing 'icc version'. The cc_version for icc is correctly determined + # containing 'icc version'. The cxx_version for icc is correctly determined # and flags added in the intel-flags script. cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 | grep -v 'PathScale' |\ - grep -v 'icc version' |\ + grep -v '^icc.*version' |\ grep 'gcc version' | sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" cxx_vendor=`echo $cxx_version |sed 's/\([a-z]*\).*/\1/'` cxx_version=`echo $cxx_version |sed 's/[-a-z]//g'` if test X = "X$cxx_vendor" -a X != "X$cxx_version"; then - cxx_vendor=g++ + cxx_vendor=g++ fi if test "-" != "$cxx_vendor-$cxx_version"; then - echo "compiler '$CXX' is GNU $cxx_vendor-$cxx_version" + echo "compiler '$CXX' is GNU $cxx_vendor-$cxx_version" fi - # Some version numbers + # Get the compiler version numbers cxx_vers_major=`echo $cxx_version | cut -f1 -d.` cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` - test -n "$cc_vers_major" || cxx_vers_major=0 - test -n "$cc_vers_minor" || cxx_vers_minor=0 - test -n "$cc_vers_patch" || cxx_vers_patch=0 + test -n "$cxx_vers_major" || cxx_vers_major=0 + test -n "$cxx_vers_minor" || cxx_vers_minor=0 + test -n "$cxx_vers_patch" || cxx_vers_patch=0 cxx_vers_all=`expr $cxx_vers_major '*' 1000000 + $cxx_vers_minor '*' 1000 + $cxx_vers_patch` fi -# Common g++ flags for various situations -case "$cxx_vendor-$cxx_version" in - g++*) - # Architecture-specific flags +if test "X-g++" = "X-$cxx_vendor"; then + + ############################### + # Architecture-specific flags # + ############################### + arch= case "$host_os-$host_cpu" in # FreeBSD sets the information from "uname -m" to the general machine @@ -84,742 +118,143 @@ case "$cxx_vendor-$cxx_version" in ;; esac - # Host-specific flags - case "`hostname`" in - sleipnir.ncsa.uiuc.edu) - arch="$arch -pipe" - ;; - esac - - # General (copied from H5_CFLAGS) - H5_CXXFLAGS="$H5_CXXFLAGS $arch -pedantic -Wall -W -Wundef -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Wredundant-decls -Winline" - # C++-specific - H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-promo -Woverloaded-virtual -Wold-style-cast -Weffc++ -Wreorder -Wnon-virtual-dtor -Wctor-dtor-privacy -Wabi" + H5_CXXFLAGS="$H5_CXXFLAGS $arch" + + ############## + # Production # + ############## - # Production # NDEBUG is handled explicitly by the configure script - case "$cxx_vendor-$cxx_version" in - g++-[34].*) + if test $cxx_vers_major -le 4; then PROD_CXXFLAGS= - ;; - g++-[56].*) + else PROD_CXXFLAGS="-fstdarg-opt" - ;; - *) - PROD_CXXFLAGS="-finline-functions" - ;; - esac + fi + + ######### + # Debug # + ######### - # Debug # NDEBUG is handled explicitly by the configure script - # -g is hanled by the symbols flags - case "$cxx_vendor-$cxx_version" in - g++-[56].*) - DEBUG_CXXFLAGS="-ftrapv -fno-common" - ;; - *) + # -g is handled by the symbols flags + if test $cxx_vers_major -le 4; then DEBUG_CXXFLAGS= - ;; - esac + else + DEBUG_CXXFLAGS="-ftrapv -fno-common" + fi + + ########### + # Symbols # + ########### - # Symbols NO_SYMBOLS_CXXFLAGS="-s" SYMBOLS_CXXFLAGS="-g" - # Profile + ############# + # Profiling # + ############# + PROFILE_CXXFLAGS="-pg" - # Optimization - case "$cxx_vendor-$cxx_version" in - g++-[34].*) + ################ + # Optimization # + ################ + + if test $cxx_vers_major -le 4; then HIGH_OPT_CXXFLAGS="-O3" DEBUG_OPT_CXXFLAGS= - ;; - g++-[56].*) + else HIGH_OPT_CXXFLAGS="-O3" DEBUG_OPT_CXXFLAGS="-Og" - ;; - *) - HIGH_OPT_CXXFLAGS="-O" - DEBUG_OPT_CXXFLAGS= - ;; - esac + fi NO_OPT_CXXFLAGS="-O0" - # Flags are set - cxx_flags_set=yes - ;; -esac - -# Version-specific g++ flags -# -# Please follow the pattern below by adding new versions at the top, copying -# the information from the previous version and adding modifications to that. -case "$cxx_vendor-$cxx_version" in - -# Closer to the g++ 5.2 release, we should check for additional flags to -# include and break it out into it's own section, like the other versions -# below. -QAK - g++-[56]*) - - # Append warning flags from gcc-3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - - # Append more extra warning flags that only gcc 4.9+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdate-time -Wopenmp-simd" - - # (There was no release of gcc 5.0) - - # Append more extra warning flags that only gcc 5.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Warray-bounds=2" - ;; - - g++-4.9*) - # Append warning flags - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc 3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc 3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - - # Append more extra warning flags that only gcc 4.9+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdate-time -Wopenmp-simd" - ;; - - g++-4.8*) - # Append warning flags - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - - # Append more extra warning flags that only gcc 4.8+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsuggest-attribute=format" - ;; - - g++-4.7*) - # Append warning flags - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" + ############ + # Warnings # + ############ - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" +# First load the C warnings then add CXX warnings (if needed) - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" + ########### + # General # + ########### - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" + # Add various general warning flags in gnu-warnings for gcc versions 4.8 and later. + if test $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8 -o $cxx_vers_major -ge 5; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-general)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments cxx-error-general)" - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" + ###################### + # Developer warnings # + ###################### - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" + NO_DEVELOPER_WARNING_CXXFLAGS=$(load_gnu_arguments no-developer-general) + DEVELOPER_WARNING_CXXFLAGS=$(load_gnu_arguments developer-general) - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - - # Append more extra warning flags that only gcc 4.7+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstack-usage=8192 -Wvector-operation-performance -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - ;; - - g++-4.6*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ knows about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-aliasing -Wstrict-overflow=5" - - # Append more extra warning flags that only gcc 4.6+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wdouble-promotion -Wsuggest-attribute=const -Wtrampolines" - ;; - - g++-4.5*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc4.0+ knows about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - - # Append more extra warning flags that only gcc 4.5+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-aliasing -Wstrict-overflow=5" - ;; - - g++-4.4*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wlarger-than=2048 -Wvla" - - # Append more extra warning flags that only gcc 4.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - ;; - - g++-4.3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - - # Append more extra warning flags that only gcc 4.3+ know about - # - # Technically, variable-length arrays are part of the C99 standard, but - # we should approach them a bit cautiously... -QAK - H5_CXXFLAGS="$H5_CXXFLAGS -Wlogical-op -Wvla" - ;; - - g++-4.2*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - - # Append more extra warning flags that only gcc 4.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wstrict-overflow" - ;; - - g++-4.1.*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # Enable more format checking flags, beyond the basic -Wformat included - # in -Wall - H5_CXXFLAGS="$H5_CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - - # Append more extra warning flags that only gcc 4.1+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wunsafe-loop-optimizations -Wvolatile-register-var" - ;; + fi - g++-4.0*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" + ####################### + # gcc 4 special cases # + ####################### - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" + # GCC 4.8 through the end of GCC 4 series + if test $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.8-4.last)" + fi - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" + ############################# + # Version-specific warnings # + ############################# - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" + # gcc >= 4.8 + if test $cxx_vers_major -ge 5 -o $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.8)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-4.8)" + NO_DEVELOPER_WARNING_CXXFLAGS="$NO_DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments no-developer-4.8)" + fi - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" + # gcc >= 4.9 + if test $cxx_vers_major -ge 5 -o $cxx_vers_major -eq 4 -a $cxx_vers_minor -ge 9; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 4.9)" + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-4.9)" + fi - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" + # gcc >= 5 + if test $cxx_vers_major -ge 5; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments cxx-5)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments cxx-error-5)" + fi - # Append warning flags from gcc-3.4* case - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" + # gcc >= 6 + if test $cxx_vers_major -ge 6; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 6)" + fi - # Append more extra warning flags that only gcc 4.0+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wvariadic-macros -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros" - ;; + # gcc >= 7 + if test $cxx_vers_major -ge 7; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 7)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-7)" + fi - g++-3.4*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" + # gcc 8 + if test $cxx_vers_major -ge 8; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 8)" + #H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_gnu_arguments error-8)" + DEVELOPER_WARNING_CXXFLAGS="$DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments developer-8)" + NO_DEVELOPER_WARNING_CXXFLAGS="$NO_DEVELOPER_WARNING_CXXFLAGS $(load_gnu_arguments no-developer-8)" + fi - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" + # gcc 9 + if test $cxx_vers_major -ge 9; then + H5_CXXFLAGS="$H5_CXXFLAGS $(load_gnu_arguments 9)" + fi - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append warning flags from gcc-3.3* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - - # Append more extra warning flags that only gcc3.4+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Winvalid-pch" - - # Replace old -W flag with new -Wextra flag - H5_CXXFLAGS="`echo $H5_CXXFLAGS | sed -e 's/-W\ /-Wextra\ /g'`" - ;; - - g++-3.3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append warning flags from gcc-3.2* case - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - - # Append more extra warning flags that only gcc3.3+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wendif-labels" - ;; - - g++-3.2*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append warning flags from gcc-3* case - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - - # Append more extra warning flags that only gcc3.2+ know about - H5_CXXFLAGS="$H5_CXXFLAGS -Wmissing-noreturn -Wpacked -Wdisabled-optimization" - - # The "format=2" warning generates too many warnings about valid - # usage in the library. - #CXXFLAGS="$CXXFLAGS -Wformat=2" - - # The "unreachable code" flag generates many spurious C++ warnings. - # We'll disable it for now. - #H5_CXXFLAGS="$H5_CXXFLAGS -Wunreachable-code" - ;; - - g++-3*) - # Disable warnings about using 'long long' type - H5_CXXFLAGS="$H5_CXXFLAGS -Wno-long-long" - - # Append some extra warning flags that only gcc3+ know about - # (don't use -Wpadded flag for normal builds, many of the warnings its - # issuing can't be fixed and they are making it hard to detect other, - # more important warnings) - #H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute -Wpadded" - H5_CXXFLAGS="$H5_CXXFLAGS -Wfloat-equal -Wmissing-format-attribute" - ;; -esac + ################# + # Flags are set # + ################# + cxx_flags_set=yes +fi # Clear cxx info if no flags set if test "X$cxx_flags_set" = "X"; then diff --git a/config/gnu-fflags b/config/gnu-fflags index 6b5e6a1..105a990 100644 --- a/config/gnu-fflags +++ b/config/gnu-fflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not GNU; otherwise `f9x_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for GNU fortran # gfortran unless a compiler version is already known # @@ -25,9 +39,8 @@ # if test X = "X$f9x_flags_set"; then f9x_version="`$FC $FCFLAGS $H5_FCFLAGS -v 2>&1 |grep 'gcc version' |\ - sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" + sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" if test X != "X$f9x_version"; then -# is_mpi="`$FC $FCFLAGS $H5_FCFLAGS -help 2>&1 |grep 'link MPI'`" f9x_vendor=`echo $f9x_version |sed 's/\([a-z]*\).*/\1/'` f9x_version=`echo $f9x_version |sed 's/[-a-z]//g'` if test X = "X$f9x_vendor" -a X != "X$f9x_version"; then @@ -37,24 +50,36 @@ if test X = "X$f9x_flags_set"; then echo "compiler '$FC' is GNU $f9x_vendor-$f9x_version" fi - # Some version numbers + # Get the compiler version numbers f9x_vers_major=`echo $f9x_version | cut -f1 -d.` f9x_vers_minor=`echo $f9x_version | cut -f2 -d.` f9x_vers_patch=`echo $f9x_version | cut -f3 -d.` test -n "$f9x_vers_major" || f9x_vers_major=0 test -n "$f9x_vers_minor" || f9x_vers_minor=0 test -n "$f9x_vers_patch" || f9x_vers_patch=0 - f9x_vers_all=`expr $f9x_vers_major '*' 1000000 + $f9x_vers_minor '*' 1000 + $f9x_vers_patch` fi fi -# Common GNU flags for various situations if test "X-gfortran" = "X-$f9x_vendor"; then - # Insert section about version specific problems from gnu-flags here, if - # necessary. + + FC_BASENAME=gfortran + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + + # Need Fortran 2008 support for storage_size() in gcc 4.6 on + # (2008ts in some versions) + if test $f9x_vers_major -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS -std=f2008" + elif test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 6; then + H5_FCFLAGS="$H5_FCFLAGS -std=f2008ts" + fi + + + ############################### + # Architecture-specific flags # + ############################### arch= - # Architecture-specific flags # Nothing currently. (Uncomment code below and modify to add any) #case "$host_os-$host_cpu" in # *-i686) @@ -62,43 +87,93 @@ if test "X-gfortran" = "X-$f9x_vendor"; then # ;; #esac - # Host-specific flags - # Nothing currently. (Uncomment code below and modify to add any) - #case "`hostname`" in - # sleipnir.ncsa.uiuc.edu) - # arch="$arch -pipe" - # ;; - #esac - - # General - FC_BASENAME=gfortran - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS -pedantic -Wall -Wextra -Wunderflow -Wimplicit-interface -Wsurprising" + H5_FCFLAGS="$H5_FCFLAGS $arch" - # Turn off warnings for passing non-ANSI types to BIND(). - # We pass a lot of hid_t, etc. types so this generates a LOT of spurious warnings. - H5_FCFLAGS="$H5_FCFLAGS -Wno-c-binding-type" + ############## + # Production # + ############## - # Production PROD_FCFLAGS= - # Debug - DEBUG_FCFLAGS="-fbounds-check" + ######### + # Debug # + ######### + + if test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 5; then + DEBUG_FCFLAGS="-fcheck=all" + else + DEBUG_FCFLAGS="-fbounds-check" + fi + + ########### + # Symbols # + ########### - # Symbols - SYMBOLS_FCFLAGS="-g" NO_SYMBOLS_FCFLAGS="-s" + SYMBOLS_FCFLAGS="-g" + + ############# + # Profiling # + ############# - # Profiling PROFILE_FCFLAGS="-pg" - # Optimization - HIGH_OPT_FCFLAGS="-O2" - DEBUG_OPT_FCFLAGS="-O0" + ################ + # Optimization # + ################ + + if test $f9x_vers_major -le 4; then + HIGH_OPT_FCFLAGS="-O3" + DEBUG_OPT_FCFLAGS= + else + HIGH_OPT_FCFLAGS="-O3" + DEBUG_OPT_FCFLAGS="-Og" + fi NO_OPT_FCFLAGS="-O0" - # Flags are set + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-general)" + + ############################# + # Version-specific warnings # + ############################# + + # gfortran >= 4.8 + if test $f9x_vers_major -ge 5 -o $f9x_vers_major -eq 4 -a $f9x_vers_minor -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-4.8)" + fi + + # gfortran 4.9 (nothing new) + + # gfortran >= 5 + if test $f9x_vers_major -ge 5; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-5)" + fi + + # gfortran >= 6 + if test $f9x_vers_major -ge 6; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-6)" + fi + + # gfortran 7 (nothing new) + + # gfortran >= 8 + if test $f9x_vers_major -ge 8; then + H5_FCFLAGS="$H5_FCFLAGS $(load_gnu_arguments gfort-8)" + fi + + # gfortran 9 (nothing new) + + ################# + # Flags are set # + ################# f9x_flags_set=yes fi diff --git a/config/gnu-flags b/config/gnu-flags index 6355ccf..7cf90b8 100644 --- a/config/gnu-flags +++ b/config/gnu-flags @@ -17,6 +17,38 @@ # if the compiler is not GNU; otherwise 'cc_flags_set' is set to 'yes' # +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/gnu-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_gnu_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/gnu-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for gcc # unless a compiler version is already known # @@ -32,7 +64,7 @@ if test "X-" = "X-$cc_flags_set"; then # containing 'icc version'. The cc_version for icc is correctly determined # and flags added in the intel-flags script. cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 | grep -v 'PathScale' |\ - grep -v 'icc version' |\ + grep -v '^icc.*version' |\ grep 'gcc version' | sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'` cc_version=`echo $cc_version |sed 's/[-a-z]//g'` @@ -138,7 +170,7 @@ if test "X-gcc" = "X-$cc_vendor"; then ################ # Optimization # ################ - + if test $cc_vers_major -le 4; then HIGH_OPT_CFLAGS="-O3" DEBUG_OPT_CFLAGS= @@ -156,136 +188,73 @@ if test "X-gcc" = "X-$cc_vendor"; then # General # ########### - # Note that some of the flags listed here really should be developer - # flags (listed in a separate variable, below) but we put them here - # because they are not raised by the current code and we'd like to - # know if they do start showing up. - # - # NOTE: Don't add -Wpadded here since we can't/won't fix the (many) - # warnings that are emitted. If you need it, add it from the - # environment variable at configure time. - # - # NOTE: Disable the -Wformat-nonliteral from -Wformat=2 here and re-add - # it to the developer flags. - # - H5_CFLAGS="$H5_CFLAGS -pedantic -Wall -Wextra -Wbad-function-cast -Wc++-compat -Wcast-align" - H5_CFLAGS="$H5_CFLAGS -Wcast-qual -Wconversion -Wdeclaration-after-statement -Wdisabled-optimization -Wfloat-equal" - H5_CFLAGS="$H5_CFLAGS -Wformat=2 -Wno-format-nonliteral -Winit-self -Winvalid-pch -Wmissing-declarations -Wmissing-include-dirs" - H5_CFLAGS="$H5_CFLAGS -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpacked" - H5_CFLAGS="$H5_CFLAGS -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-enum -Wswitch-default" - H5_CFLAGS="$H5_CFLAGS -Wundef -Wunused-macros -Wunsafe-loop-optimizations -Wwrite-strings" + # Add various general warning flags in gnu-warnings for gcc versions 4.8 and later. + if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8 -o $cc_vers_major -gt 4; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments general)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-general)" ###################### # Developer warnings # ###################### - # (suggestions from gcc, not code problems) - # NOTE: -Wformat-nonliteral added back in here (from being disabled in H5_CFLAGS) - DEVELOPER_WARNING_CFLAGS="-Winline -Waggregate-return -Wmissing-format-attribute -Wmissing-noreturn -Wformat-nonliteral" - NO_DEVELOPER_WARNING_CFLAGS="-Wno-inline -Wno-aggregate-return -Wno-missing-format-attribute -Wno-missing-noreturn" + NO_DEVELOPER_WARNING_CFLAGS=$(load_gnu_arguments no-developer-general) + DEVELOPER_WARNING_CFLAGS=$(load_gnu_arguments developer-general) + + fi ####################### # gcc 4 special cases # ####################### - # Disable warnings about using the 'long long' type w/ gcc 4.6 and earlier - if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 2 -o $cc_vers_major -eq 4 -a $cc_vers_minor -le 6; then - H5_CFLAGS="$H5_CFLAGS -Wno-long-long" - fi - - # -Wvolatile-register-var was later incorporated into -Wall and - # only needs to be specified explicitly for gcc 4.2-4.3 - if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 2 -o $cc_vers_major -eq 4 -a $cc_vers_minor -le 3; then - H5_CFLAGS="$H5_CFLAGS -Wvolatile-register-var" - fi - - # -Wstrict-aliasing was later incorporated into -Wall and - # only needs to be specified explicitly for gcc 4.5-4.6 - if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -le 6; then - H5_CFLAGS="$H5_CFLAGS -Wstrict-aliasing" - fi - - # The non-valued form of -Wstrict-overflow is used in gcc 4.2-4.4 - if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 2 -a $cc_vers_major -eq 4 -a $cc_vers_minor -le 4; then - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow" - fi - - # -Wvla was later incorporated into -Wpedantic and - # only needs to be specified explicitly for gcc 4 - if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 2; then - H5_CFLAGS="$H5_CFLAGS -Wvla" + # GCC 4.8 through the end of GCC 4 series + if test $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8; then + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.8-4.last)" fi ############################# # Version-specific warnings # ############################# - # gcc 4.3 - if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 3; then - H5_CFLAGS="$H5_CFLAGS -Wlogical-op -Wlarger-than=2560" - fi - - # gcc 4.4 - if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 4; then - H5_CFLAGS="$H5_CFLAGS -Wsync-nand -Wframe-larger-than=16384 -Wpacked-bitfield-compat" - fi - - # gcc 4.5 - if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 5; then - H5_CFLAGS="$H5_CFLAGS -Wstrict-overflow=5 -Wjump-misses-init -Wunsuffixed-float-constants" - fi - - # gcc 4.6 - if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 6; then - H5_CFLAGS="$H5_CFLAGS -Wdouble-promotion -Wtrampolines" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=const" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=const" - fi - - # gcc 4.7 - if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 7; then - H5_CFLAGS="$H5_CFLAGS -Wstack-usage=8192 -Wvector-operation-performance" - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=pure -Wsuggest-attribute=noreturn" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=pure -Wno-suggest-attribute=noreturn" - fi - - # gcc 4.8 + # gcc >= 4.8 if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 8; then - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wsuggest-attribute=format" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=format" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.8)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-4.8)" + NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments no-developer-4.8)" fi - # gcc 4.9 + # gcc >= 4.9 if test $cc_vers_major -ge 5 -o $cc_vers_major -eq 4 -a $cc_vers_minor -ge 9; then - H5_CFLAGS="$H5_CFLAGS -Wdate-time" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 4.9)" fi - # gcc 5 + # gcc >= 5 if test $cc_vers_major -ge 5; then - H5_CFLAGS="$H5_CFLAGS -Warray-bounds=2 -Wc99-c11-compat" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 5)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-5)" fi - # gcc 6 + # gcc >= 6 if test $cc_vers_major -ge 6; then - H5_CFLAGS="$H5_CFLAGS -Wnull-dereference -Wunused-const-variable -Wduplicated-cond -Whsa -Wnormalized" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 6)" fi - # gcc 7 + # gcc >= 7 if test $cc_vers_major -ge 7; then - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wstringop-overflow=2" - H5_CFLAGS="$H5_CFLAGS -Walloc-zero -Walloca -Wduplicated-branches -Wformat-overflow=2 -Wformat-truncation=2 -Wimplicit-fallthrough=5 -Wrestrict" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 7)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-7)" fi # gcc 8 if test $cc_vers_major -ge 8; then - DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS -Wstringop-overflow=4 -Wsuggest-attribute=cold -Wsuggest-attribute=malloc" - NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS -Wno-suggest-attribute=cold -Wno-suggest-attribute=malloc" - H5_CFLAGS="$H5_CFLAGS -Wattribute-alias -Wcast-align=strict -Wshift-overflow=2" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 8)" + H5_ECFLAGS="$H5_ECFLAGS $(load_gnu_arguments error-8)" + DEVELOPER_WARNING_CFLAGS="$DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments developer-8)" + NO_DEVELOPER_WARNING_CFLAGS="$NO_DEVELOPER_WARNING_CFLAGS $(load_gnu_arguments no-developer-8)" fi # gcc 9 if test $cc_vers_major -ge 9; then - H5_CFLAGS="$H5_CFLAGS -Wattribute-alias=2 -Wmissing-profile" + H5_CFLAGS="$H5_CFLAGS $(load_gnu_arguments 9)" fi ################# @@ -299,3 +268,4 @@ if test "X$cc_flags_set" = "X"; then cc_vendor= cc_version= fi + diff --git a/config/gnu-warnings/4.8 b/config/gnu-warnings/4.8 new file mode 100644 index 0000000..05f4d92 --- /dev/null +++ b/config/gnu-warnings/4.8 @@ -0,0 +1,28 @@ +# warning flags added for GCC >= 4.3 +-Wlarger-than=2560 +-Wlogical-op + +# warning flags added for GCC >= 4.4 +-Wframe-larger-than=16384 +-Wpacked-bitfield-compat +-Wsync-nand + +# warning flag added for GCC >= 4.5 +-Wstrict-overflow=5 +# This warning can only be truly addressed using the gcc extension of +# using D to indicate doubles (e.g., 1.23D). +-Wno-unsuffixed-float-constants + +# warning flags added for GCC >= 4.6 +-Wdouble-promotion +-Wtrampolines + +# warning flag added for GCC >= 4.7 +# +# -Wstack-usage=8192 warnings need to be swept up on a branch so +# that we can stop burdening the whole development team. +# +-Wstack-usage=8192 + +# warning flag added for GCC >= 4.8 +-Wmaybe-uninitialized diff --git a/config/gnu-warnings/4.8-4.last b/config/gnu-warnings/4.8-4.last new file mode 100644 index 0000000..2db90fb --- /dev/null +++ b/config/gnu-warnings/4.8-4.last @@ -0,0 +1,3 @@ +# -Wvla was later incorporated into -Wpedantic and +# only needs to be specified explicitly for gcc 4 +-Wvla diff --git a/config/gnu-warnings/4.9 b/config/gnu-warnings/4.9 new file mode 100644 index 0000000..78aa929 --- /dev/null +++ b/config/gnu-warnings/4.9 @@ -0,0 +1 @@ +-Wdate-time diff --git a/config/gnu-warnings/5 b/config/gnu-warnings/5 new file mode 100644 index 0000000..32cb196 --- /dev/null +++ b/config/gnu-warnings/5 @@ -0,0 +1,2 @@ +-Warray-bounds=2 +-Wc99-c11-compat diff --git a/config/gnu-warnings/6 b/config/gnu-warnings/6 new file mode 100644 index 0000000..736a446 --- /dev/null +++ b/config/gnu-warnings/6 @@ -0,0 +1,9 @@ +# +# Careful! -Wduplicated-cond, combined with HDF5's heavy use of +# macros, can make a lot of noise. +# +-Wduplicated-cond +-Whsa +-Wnormalized +-Wnull-dereference +-Wunused-const-variable diff --git a/config/gnu-warnings/7 b/config/gnu-warnings/7 new file mode 100644 index 0000000..266f5c1 --- /dev/null +++ b/config/gnu-warnings/7 @@ -0,0 +1,7 @@ +-Walloca +-Walloc-zero +-Wduplicated-branches +-Wformat-overflow=2 +-Wformat-truncation=1 +-Wimplicit-fallthrough=5 +-Wrestrict diff --git a/config/gnu-warnings/8 b/config/gnu-warnings/8 new file mode 100644 index 0000000..5e7519d --- /dev/null +++ b/config/gnu-warnings/8 @@ -0,0 +1,3 @@ +-Wattribute-alias +-Wcast-align=strict +-Wshift-overflow=2 diff --git a/config/gnu-warnings/9 b/config/gnu-warnings/9 new file mode 100644 index 0000000..c084350 --- /dev/null +++ b/config/gnu-warnings/9 @@ -0,0 +1,2 @@ +-Wattribute-alias=2 +-Wmissing-profile diff --git a/config/gnu-warnings/cxx-4.9 b/config/gnu-warnings/cxx-4.9 new file mode 100644 index 0000000..046d6db --- /dev/null +++ b/config/gnu-warnings/cxx-4.9 @@ -0,0 +1 @@ +-Wopenmp-simd diff --git a/config/gnu-warnings/cxx-5 b/config/gnu-warnings/cxx-5 new file mode 100644 index 0000000..723e448 --- /dev/null +++ b/config/gnu-warnings/cxx-5 @@ -0,0 +1 @@ +-Warray-bounds=2 diff --git a/config/gnu-warnings/cxx-error-5 b/config/gnu-warnings/cxx-error-5 new file mode 100644 index 0000000..8cc8c9d --- /dev/null +++ b/config/gnu-warnings/cxx-error-5 @@ -0,0 +1,11 @@ +# +# In GCC 4.4.7, the compiler gripes about shadowed global +# declarations when a local variable uses the name of a +# function that's in a system header file. For some reason, +# later versions of GCC (e.g., 5.2.0) don't complain about +# the shadowed globals. Maybe later versions are less fussy? +# Anyway, the shadowing seems to be harmless, and GCC 4.4.7 +# is not a supported compiler, so let us promote shadowed globals +# warnings to errors only for GCC 5 and later. +# +-Werror=shadow diff --git a/config/gnu-warnings/cxx-error-general b/config/gnu-warnings/cxx-error-general new file mode 100644 index 0000000..85cd9a3 --- /dev/null +++ b/config/gnu-warnings/cxx-error-general @@ -0,0 +1,32 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/tcompound.cpp +# -Werror=cast-align +-Wcast-align +# NOTE: c++/src files are not compatible with these warnings as errors +# c++/src/H5Object.cpp +# -Werror=missing-declarations +-Wmissing-declarations +-Werror=packed +-Werror=redundant-decls +-Werror=switch +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/tattr.cpp +# -Werror=unused-but-set-variable +-Wunused-but-set-variable +-Werror=unused-function +-Werror=unused-variable +# NOTE: c++/src files are not compatible with these warnings as errors +# c++/src/H5Object.cpp,c++/src/H5StrType.cpp,c++/src/H5PredType.cpp +# -Werror=unused-parameter +-Wunused-parameter +# +# Other files not compatible +# NOTE: c++/test files are not compatible with these warnings as errors +# c++/test/titerate.cpp,c++/test/tarray.cpp +# -Werror=missing-declarations +# c++/test/titerate.cpp,c++/test/tarray.cpp,c++/test/tlinks.cpp,c++/test/ttypes.cpp,c++/test/dsets.cpp +# -Werror=unused-parameter diff --git a/config/gnu-warnings/cxx-general b/config/gnu-warnings/cxx-general new file mode 100644 index 0000000..9548cc0 --- /dev/null +++ b/config/gnu-warnings/cxx-general @@ -0,0 +1,31 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +# +# NOTE: Don't add -Wpadded here since we can't/won't fix the (many) +# warnings that are emitted. If you need it, add it from the +# environment variable at configure time. +-Wall +-Wcast-qual +-Wconversion +-Wctor-dtor-privacy +-Weffc++ +-Wextra +-Wfloat-equal +-Wformat=2 +-Winit-self +-Winvalid-pch +-Wmissing-include-dirs +-Wno-format-nonliteral +-Wnon-virtual-dtor +-Wold-style-cast +-Woverloaded-virtual +-Wreorder +-Wshadow +-Wsign-promo +##-Wunreachable-code +-Wundef +##-Wvariadic-macros +-Wwrite-strings +-pedantic diff --git a/config/gnu-warnings/developer-4.8 b/config/gnu-warnings/developer-4.8 new file mode 100644 index 0000000..bfd15a1 --- /dev/null +++ b/config/gnu-warnings/developer-4.8 @@ -0,0 +1,22 @@ +# developer warning flags added for GCC >= 4.5 +# +# -Wjump-misses-init makes lots of noise for a questionable benefit. +# Can jumping over an initialization in C cause any harm, if +# the variable is never *used* before it has been initialized? +# +-Wjump-misses-init + +# developer warning flag added for GCC >= 4.6 +-Wsuggest-attribute=const + +# developer warning flags added for GCC >= 4.7 +-Wsuggest-attribute=noreturn +-Wsuggest-attribute=pure +# +# It's not clear that -Wvector-operation-performance warnings are +# actionable, so they are demoted to "developer" warnings. +# +-Wvector-operation-performance + +# developer warning flag added for GCC >= 4.8 +-Wsuggest-attribute=format diff --git a/config/gnu-warnings/developer-7 b/config/gnu-warnings/developer-7 new file mode 100644 index 0000000..2a3ce7e --- /dev/null +++ b/config/gnu-warnings/developer-7 @@ -0,0 +1 @@ +-Wstringop-overflow=2 diff --git a/config/gnu-warnings/developer-8 b/config/gnu-warnings/developer-8 new file mode 100644 index 0000000..a2ba7ca --- /dev/null +++ b/config/gnu-warnings/developer-8 @@ -0,0 +1,3 @@ +-Wstringop-overflow=4 +-Wsuggest-attribute=cold +-Wsuggest-attribute=malloc diff --git a/config/gnu-warnings/developer-general b/config/gnu-warnings/developer-general new file mode 100644 index 0000000..b34c4b7 --- /dev/null +++ b/config/gnu-warnings/developer-general @@ -0,0 +1,13 @@ +# (suggestions from gcc, not code problems) +# NOTE: -Wformat-nonliteral added back in here (from being disabled in +# H5_CFLAGS) +-Waggregate-return +-Wdisabled-optimization +-Wformat-nonliteral +-Winline +-Wmissing-format-attribute +-Wmissing-noreturn +-Wswitch-default +-Wswitch-enum +-Wunsafe-loop-optimizations +-Wunused-macros diff --git a/config/gnu-warnings/error-5 b/config/gnu-warnings/error-5 new file mode 100644 index 0000000..f7e1138 --- /dev/null +++ b/config/gnu-warnings/error-5 @@ -0,0 +1,12 @@ +-Werror=incompatible-pointer-types +# +# In GCC 4.4.7, the compiler gripes about shadowed global +# declarations when a local variable uses the name of a +# function that's in a system header file. For some reason, +# later versions of GCC (e.g., 5.2.0) don't complain about +# the shadowed globals. Maybe later versions are less fussy? +# Anyway, the shadowing seems to be harmless, and GCC 4.4.7 +# is not a supported compiler, so let us promote shadowed globals +# warnings to errors only for GCC 5 and later. +# +-Werror=shadow diff --git a/config/gnu-warnings/error-8 b/config/gnu-warnings/error-8 new file mode 100644 index 0000000..2f54a4d --- /dev/null +++ b/config/gnu-warnings/error-8 @@ -0,0 +1,25 @@ +# NOTE: src/ files are not compatible with these warnings as errors +# src/H5Dchunk.c +# -Werror=cast-function-type +-Wcast-function-type +# +# For GCC 8, promote maybe-initialized warnings to an error. GCC 8 +# reports 0 maybe-uninitialized warnings where earlier versions +# make many false reports. GCC 8 seems to analyze calls to static +# in order to detect initializations that occur there. It's possible +# that GCC 8 only performs that analysis at -O3, though. +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDlog.c, +# -Werror=maybe-uninitialized +-Wmaybe-uninitialized +# NOTE: src/ files are not compatible with these warnings as errors +# src/H5Shyper.c,src/H5SL.c,src/H5Shyper.c +# -Werror=maybe-uninitialized +# NOTE: Test files are not compatible with these warnings as errors +# test/cache_common.c, +# -Werror=maybe-uninitialized +# NOTE: hl/src/ files are not compatible with these warnings as errors +# hl/src/H5DS.c, +# -Werror=maybe-uninitialized diff --git a/config/gnu-warnings/error-general b/config/gnu-warnings/error-general new file mode 100644 index 0000000..f0e61f8 --- /dev/null +++ b/config/gnu-warnings/error-general @@ -0,0 +1,91 @@ +# +# HDF5 code should not trigger the following warnings under any +# circumstances, so ask the compiler to treat them as errors: +# +-Werror=bad-function-cast +-Werror=declaration-after-statement +-Werror=implicit-function-declaration +-Werror=missing-declarations +-Werror=missing-prototypes +-Werror=nested-externs +-Werror=old-style-definition +-Werror=packed +-Werror=pointer-sign +-Werror=pointer-to-int-cast +-Werror=redundant-decls +-Werror=strict-prototypes +-Werror=switch +# +#-Werror=discarded-qualifiers +# +# +# NOTE: File Driver files are not compatible with these warnings as errors +# H5FDdirect.c,H5FDmpio.c,H5FDros3.c, +# -Werror=unused-function +# +-Wunused-function +# +# H5FDdrvr_module.h +# -Werror=unused-variable +# +-Wunused-variable +# +# H5VLpassthru.c +# -Werror=unused-parameter +# +-Wunused-parameter +# +# +# +# NOTE: Tools files are not compatible with these warnings as errors +# lib/h5tools.c +# -Werror=cast-align +# +-Wcast-align +# +# lib/h5diff_array.c +# -Werror=unused-but-set-variable +# +-Wunused-but-set-variable +# +# lib/h5tools_utils.c +# -Werror=unused-parameter +# +# +# NOTE: JNI files are not compatible with these warnings as errors +# jni/h5pDCPLImp.c,jni/nativeData.c,jni/h5util.c,jni/h5rImp.c +# jni/h5sImp.c,jni/h5tImp.c +# -Werror=cast-align +# jni/h5util.c +# -Werror=format(-overflow) +# +-Wformat +# +# +#Examples and tests do not use the same set of extensive warning flags as libraries +# Here is a list of tests and examples that have issues with the stricter warnings as error +# +# NOTE: Test files are not compatible with these warnings as errors +# thread_id.c, +# -Werror=unused-function +# dsets.c +# -Werror=unused-parameter +# external.c,perform/sio_engine.c +# -Werror=format(-truncation) +# +# +# NOTE: Examples files are not compatible with these warnings as errors +# h5_vds-eiger.c,h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c,h5_vds-percival-unlim-maxmin.c +# h5_vds-percival.c,h5_read.c,h5_rdwt.c,h5_mount.c,h5_extend.c,h5_extend_write.c +# h5_write.c,h5_vds-simpleIO.c,h5_ref2reg_deprec.c,h5_crtgrp.c,h5_select.c +# h5_vds-percival-unlim.c,h5_crtatt.c,h5_group.c,h5_attribute.c,h5_crtdat.c +# h5_reference_deprec.c +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=strict-prototypes +# h5_rdwt.c,h5_crtgrp.c,h5_crtatt.c,h5_crtdat.c +# -Werror=old-style-definition +# h5_vds-exclim.c,h5_vds.c,h5_vds-exc.c, +# -Werror=unused-variable +# h5_elink_unix2win.c,h5_extlink.c,h5_attribute.c +# -Werror=unused-parameter + diff --git a/config/gnu-warnings/general b/config/gnu-warnings/general new file mode 100644 index 0000000..a7a20b7 --- /dev/null +++ b/config/gnu-warnings/general @@ -0,0 +1,32 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +# +# NOTE: Don't add -Wpadded here since we can't/won't fix the (many) +# warnings that are emitted. If you need it, add it from the +# environment variable at configure time. +-Wall +-Wcast-qual +-Wconversion +-Wextra +-Wfloat-equal +-Wformat=2 +-Winit-self +-Winvalid-pch +-Wmissing-include-dirs +# +# NOTE: Due to the divergence in the C and C++, we're dropping support for +# compiling the C library with a C++ compiler and dropping the -Wc++-compat +# warning. +# +-Wno-c++-compat +# +# NOTE: Disable the -Wformat-nonliteral from -Wformat=2 here and re-add +# it to the developer flags. +# +-Wno-format-nonliteral +-Wshadow +-Wundef +-Wwrite-strings +-pedantic diff --git a/config/gnu-warnings/gfort-4.8 b/config/gnu-warnings/gfort-4.8 new file mode 100644 index 0000000..9d880de --- /dev/null +++ b/config/gnu-warnings/gfort-4.8 @@ -0,0 +1,17 @@ +# warning flags added for gfortran >= 4.4 +-Warray-temporaries +-Wintrinsics-std + +# warning flag added for gfortran >= 4.5 +-Wimplicit-procedure + +# warning flags added for gfortran >= 4.7 +-Wreal-q-constant +-Wfunction-elimination + +# warning flags added for gfortran >= 4.8 +-Wrealloc-lhs +-Wrealloc-lhs-all +# Turn off warnings for passing non-ANSI types to BIND(). +# We pass a lot of hid_t, etc. types so this generates a LOT of spurious warnings. +-Wno-c-binding-type diff --git a/config/gnu-warnings/gfort-5 b/config/gnu-warnings/gfort-5 new file mode 100644 index 0000000..c5d3850 --- /dev/null +++ b/config/gnu-warnings/gfort-5 @@ -0,0 +1 @@ +-Wuse-without-only diff --git a/config/gnu-warnings/gfort-6 b/config/gnu-warnings/gfort-6 new file mode 100644 index 0000000..f70466c --- /dev/null +++ b/config/gnu-warnings/gfort-6 @@ -0,0 +1 @@ +-Winteger-division diff --git a/config/gnu-warnings/gfort-8 b/config/gnu-warnings/gfort-8 new file mode 100644 index 0000000..5097365 --- /dev/null +++ b/config/gnu-warnings/gfort-8 @@ -0,0 +1 @@ +-Wfrontend-loop-interchange diff --git a/config/gnu-warnings/gfort-general b/config/gnu-warnings/gfort-general new file mode 100644 index 0000000..4028316 --- /dev/null +++ b/config/gnu-warnings/gfort-general @@ -0,0 +1,12 @@ +# Note that some of the flags listed here really should be developer +# flags (listed in separate files, gnu-warnings-developer*) but we put +# them here because they are not raised by the current code and we'd like to +# know if they do start showing up. +-Waliasing +-Wall +-Wcharacter-truncation +-Wextra +-Wimplicit-interface +-Wsurprising +-Wunderflow +-pedantic diff --git a/config/gnu-warnings/no-developer-4.8 b/config/gnu-warnings/no-developer-4.8 new file mode 100644 index 0000000..09a9a96 --- /dev/null +++ b/config/gnu-warnings/no-developer-4.8 @@ -0,0 +1,12 @@ +# no-developer warning flag added for GCC >= 4.5 +-Wno-jump-misses-init + +# no-developer warning flag added for GCC >= 4.6 +-Wno-suggest-attribute=const + +# no-developer warning flags added for GCC >= 4.7 +-Wno-suggest-attribute=noreturn +-Wno-suggest-attribute=pure + +# no-developer warning flag added for GCC >= 4.8 +-Wno-suggest-attribute=format diff --git a/config/gnu-warnings/no-developer-8 b/config/gnu-warnings/no-developer-8 new file mode 100644 index 0000000..2134bad --- /dev/null +++ b/config/gnu-warnings/no-developer-8 @@ -0,0 +1,2 @@ +-Wno-suggest-attribute=cold +-Wno-suggest-attribute=malloc diff --git a/config/gnu-warnings/no-developer-general b/config/gnu-warnings/no-developer-general new file mode 100644 index 0000000..18831dd --- /dev/null +++ b/config/gnu-warnings/no-developer-general @@ -0,0 +1,8 @@ +-Wno-aggregate-return +-Wno-inline +-Wno-missing-format-attribute +-Wno-missing-noreturn +# NOTE: -pedantic includes -Woverlength-strings which triggers a warning +# regarding the library settings string (H5libhdf5_settings). We'll turn +# it off here but leave it on in the developer flags. +-Wno-overlength-strings diff --git a/config/intel-fflags b/config/intel-fflags index 8b1110e..ed7ee52 100644 --- a/config/intel-fflags +++ b/config/intel-fflags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not Intel; otherwise `f9x_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/intel-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_intel_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/intel-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for ifort # ifort unless a compiler version is already known # @@ -44,8 +58,8 @@ fi # Common Intel flags for various situations if test "X-ifort" = "X-$f9x_vendor"; then - # Insert section about version specific problems from gnu-flags here, if - # necessary. + # Insert section about version specific problems from compiler flags here, + # if necessary. arch= # Architecture-specific flags @@ -68,7 +82,8 @@ if test "X-ifort" = "X-$f9x_vendor"; then FC_BASENAME=ifort F9XSUFFIXFLAG="" FSEARCH_DIRS="" - H5_FCFLAGS="$H5_FCFLAGS" + H5_FCFLAGS="$H5_FCFLAGS -stand:f03 -free" + H5_FCFLAGS="$H5_FCFLAGS $(load_intel_arguments ifort-general)" # Production PROD_FCFLAGS= @@ -89,7 +104,9 @@ if test "X-ifort" = "X-$f9x_vendor"; then DEBUG_OPT_FCFLAGS= NO_OPT_FCFLAGS= - # Flags are set + ################# + # Flags are set # + ################# f9x_flags_set=yes fi diff --git a/config/intel-flags b/config/intel-flags index dad210c..100e68a 100644 --- a/config/intel-flags +++ b/config/intel-flags @@ -1,4 +1,4 @@ -# -*- shell-script -*- +# -*- shell-script -*- # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -17,6 +17,20 @@ # if the compiler is not Intel; otherwise `cc_flags_set' is set to `yes' # +# +# Prepend `$srcdir/config/intel-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_intel_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/intel-warnings/${arg} + done) + IFS=' ' echo "$*" +} + # Get the compiler version in a way that works for icc # icc unless a compiler version is already known # @@ -66,7 +80,7 @@ if test "X-icc" = "X-$cc_vendor"; then # General # Default to C99 standard. - H5_CFLAGS="$H5_CFLAGS $arch -std=c99 -Wcheck -Wall" + H5_CFLAGS="$H5_CFLAGS $arch -std=c99" # Production PROD_CFLAGS= @@ -88,16 +102,20 @@ if test "X-icc" = "X-$cc_vendor"; then DEBUG_OPT_CFLAGS="-O0" NO_OPT_CFLAGS="-O0" - # Flags are set - cc_flags_set=yes + ############ + # Warnings # + ############ -fi + ########### + # General # + ########### + + H5_CFLAGS="$H5_CFLAGS $(load_intel_arguments general)" + + ############################# + # Version-specific warnings # + ############################# -# Version specific ICC flags -# -# Please follow the pattern below by adding new versions at the top, copying -# the information from the previous version and adding modifications to that. -# The default at the bottom will apply if no earlier version matches. case "$cc_vendor-$cc_version" in icc-1[5-6]*) H5_CFLAGS="$H5_CFLAGS -Wcomment -Wdeprecated -Wextra-tokens -Wformat -Wformat-security -Wmain -Wmissing-declarations -Wmissing-prototypes -Wp64 -Wpointer-arith -Wreturn-type -Wshadow -Wstrict-prototypes -Wtrigraphs -Wuninitialized -Wunknown-pragmas -Wunused-function -Wunused-variable -Wwrite-strings" @@ -113,6 +131,13 @@ case "$cc_vendor-$cc_version" in ;; esac + ################# + # Flags are set # + ################# + cc_flags_set=yes + +fi + # Clear cc info if no flags set if test "X-$cc_flags_set" = "X-"; then cc_vendor= diff --git a/config/intel-warnings/general b/config/intel-warnings/general new file mode 100644 index 0000000..d0b2e25 --- /dev/null +++ b/config/intel-warnings/general @@ -0,0 +1,2 @@ +-Wall +-Wcheck
\ No newline at end of file diff --git a/config/intel-warnings/ifort-general b/config/intel-warnings/ifort-general new file mode 100644 index 0000000..a9da0e5 --- /dev/null +++ b/config/intel-warnings/ifort-general @@ -0,0 +1 @@ +-warn:all diff --git a/config/linux-gnueabihf b/config/linux-gnueabihf new file mode 100644 index 0000000..326edeb --- /dev/null +++ b/config/linux-gnueabihf @@ -0,0 +1,16 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + +# ARM for Raspberry Pi, etc. +# This is the same as linux-gnulibc1 + +. $srcdir/config/linux-gnulibc1 diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1 index 39225e7..a6f81ff 100644 --- a/config/linux-gnulibc1 +++ b/config/linux-gnulibc1 @@ -42,6 +42,9 @@ fi # Figure out Intel C compiler flags . $srcdir/config/intel-flags +# Figure out Clang C compiler flags +. $srcdir/config/clang-flags + # Use default Fortran 90 compiler according to what C compiler is used. if test "X-" = "X-$FC"; then case $CC_BASENAME in @@ -61,6 +64,11 @@ if test "X-" = "X-$FC"; then FC=mpif90 FC_BASENAME=mpif90 ;; + clang*) + # clang has no fortran compiler. Use gfortran. + FC=gfortran + FC_BASENAME=gfortran + ;; esac else case $FC in @@ -194,6 +202,9 @@ fi # Figure out GNU CXX compiler flags . $srcdir/config/gnu-cxxflags +# Figure out Clang CXX compiler flags +. $srcdir/config/clang-cxxflags + # compiler version strings # check if the compiler_version_info is already set @@ -223,6 +234,11 @@ case $CC in sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'` ;; + *clang*) + cc_version_info="`$CC $CFLAGS $H5_CFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cc_version_info for $CC" ;; @@ -317,6 +333,11 @@ case $CXX in cxx_version_info=`echo $cxx_version_info` ;; + *clang++*) + cxx_version_info="`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cxx_version_info for $CXX" ;; diff --git a/config/lt_vers.am b/config/lt_vers.am index 0ba3bad..e0ba99d 100644 --- a/config/lt_vers.am +++ b/config/lt_vers.am @@ -16,9 +16,9 @@ ## See libtool versioning documentation online. ## After making changes, run bin/reconfigure to update other configure related ## files like Makefile.in. -LT_VERS_INTERFACE = 105 +LT_VERS_INTERFACE = 106 LT_VERS_REVISION = 0 -LT_VERS_AGE = 2 +LT_VERS_AGE = 3 ## If the API changes *at all*, increment LT_VERS_INTERFACE and ## reset LT_VERS_REVISION to 0. @@ -39,31 +39,31 @@ LT_VERS_AGE = 2 ## the effects of the H5_V1_x_COMPAT flag. ## ## Version numbers for wrapper shared library files. -LT_CXX_VERS_INTERFACE = 105 +LT_CXX_VERS_INTERFACE = 106 LT_CXX_VERS_REVISION = 0 -LT_CXX_VERS_AGE = 2 +LT_CXX_VERS_AGE = 3 -LT_F_VERS_INTERFACE = 102 -LT_F_VERS_REVISION = 1 -LT_F_VERS_AGE = 0 +LT_F_VERS_INTERFACE = 103 +LT_F_VERS_REVISION = 0 +LT_F_VERS_AGE = 1 LT_HL_VERS_INTERFACE = 101 -LT_HL_VERS_REVISION = 3 +LT_HL_VERS_REVISION = 4 LT_HL_VERS_AGE = 1 LT_HL_CXX_VERS_INTERFACE = 101 -LT_HL_CXX_VERS_REVISION = 4 +LT_HL_CXX_VERS_REVISION = 5 LT_HL_CXX_VERS_AGE = 1 LT_HL_F_VERS_INTERFACE = 100 -LT_HL_F_VERS_REVISION = 5 +LT_HL_F_VERS_REVISION = 6 LT_HL_F_VERS_AGE = 0 -LT_JAVA_VERS_INTERFACE = 104 -LT_JAVA_VERS_REVISION = 1 -LT_JAVA_VERS_AGE = 4 +LT_JAVA_VERS_INTERFACE = 105 +LT_JAVA_VERS_REVISION = 0 +LT_JAVA_VERS_AGE = 5 -LT_TOOLS_VERS_INTERFACE = 101 -LT_TOOLS_VERS_REVISION = 3 -LT_TOOLS_VERS_AGE = 1 +LT_TOOLS_VERS_INTERFACE = 102 +LT_TOOLS_VERS_REVISION = 0 +LT_TOOLS_VERS_AGE = 0 diff --git a/config/netbsd b/config/netbsd new file mode 100644 index 0000000..9a9348b --- /dev/null +++ b/config/netbsd @@ -0,0 +1,56 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file is part of the HDF5 build script. It is processed shortly +# after configure starts and defines, among other things, flags for +# the various compile modes. +# +# See BlankForm in this directory for details. + +# The default compiler is `gcc' +if test "X-" = "X-$CC"; then + CC=gcc + CC_BASENAME=gcc +fi + +# Figure out C compiler flags +. $srcdir/config/gnu-flags + +# Figure out Intel C compiler flags +. $srcdir/config/intel-flags + +# The default Fortran 90 compiler +if test "X-" = "X-$FC"; then + case $CC_BASENAME in + gcc*|pgcc*) + FC=gfortran + FC_BASENAME=gfortran + ;; + icc*) + FC=ifort + FC_BASENAME=ifort + ;; + mpicc*) + FC=mpif90 + FC_BASENAME=mpif90 + ;; + esac +fi + +# Figure out FORTRAN compiler flags +. $srcdir/config/gnu-fflags + +# Figure out Intel F90 compiler flags +. $srcdir/config/intel-fflags + diff --git a/config/sanitizer/LICENSE b/config/sanitizer/LICENSE new file mode 100644 index 0000000..895657b --- /dev/null +++ b/config/sanitizer/LICENSE @@ -0,0 +1,174 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability.
\ No newline at end of file diff --git a/config/sanitizer/README.md b/config/sanitizer/README.md new file mode 100644 index 0000000..0d5fb6c --- /dev/null +++ b/config/sanitizer/README.md @@ -0,0 +1,307 @@ +# CMake Scripts <!-- omit in toc --> + +[](https://git.stabletec.com/other/cmake-scripts/commits/master) +[](https://git.stabletec.com/other/cmake-scripts/blob/master/LICENSE) + +This is a collection of quite useful scripts that expand the possibilities for building software with CMake, by making some things easier and otherwise adding new build types + +- [C++ Standards `c++-standards.cmake`](#c-standards-c-standardscmake) +- [Sanitizer Builds `sanitizers.cmake`](#sanitizer-builds-sanitizerscmake) +- [Code Coverage `code-coverage.cmake`](#code-coverage-code-coveragecmake) + - [Added Targets](#added-targets) + - [Usage](#usage) + - [Example 1 - All targets instrumented](#example-1---all-targets-instrumented) + - [1a - Via global command](#1a---via-global-command) + - [1b - Via target commands](#1b---via-target-commands) + - [Example 2: Target instrumented, but with regex pattern of files to be excluded from report](#example-2-target-instrumented-but-with-regex-pattern-of-files-to-be-excluded-from-report) + - [Example 3: Target added to the 'ccov' and 'ccov-all' targets](#example-3-target-added-to-the-ccov-and-ccov-all-targets) +- [Compiler Options `compiler-options.cmake`](#compiler-options-compiler-optionscmake) +- [Dependency Graph `dependency-graph.cmake`](#dependency-graph-dependency-graphcmake) + - [Required Arguments](#required-arguments) + - [OUTPUT_TYPE *STR*](#output_type-str) + - [Optional Arguments](#optional-arguments) + - [ADD_TO_DEP_GRAPH](#add_to_dep_graph) + - [TARGET_NAME *STR*](#target_name-str) + - [OUTPUT_DIR *STR*](#output_dir-str) +- [Doxygen `doxygen.cmake`](#doxygen-doxygencmake) + - [Optional Arguments](#optional-arguments-1) + - [ADD_TO_DOC](#add_to_doc) + - [INSTALLABLE](#installable) + - [PROCESS_DOXYFILE](#process_doxyfile) + - [TARGET_NAME *STR*](#target_name-str-1) + - [OUTPUT_DIR *STR*](#output_dir-str-1) + - [INSTALL_PATH *STR*](#install_path-str) + - [DOXYFILE_PATH *STR*](#doxyfile_path-str) +- [Prepare the Catch Test Framework `prepare_catch.cmake`](#prepare-the-catch-test-framework-prepare_catchcmake) + - [Optional Arguments](#optional-arguments-2) + - [COMPILED_CATCH](#compiled_catch) + - [CATCH1](#catch1) + - [CLONE](#clone) +- [Tools `tools.cmake`](#tools-toolscmake) + - [clang-tidy](#clang-tidy) + - [include-what-you-use](#include-what-you-use) + - [cppcheck](#cppcheck) +- [Formatting `formatting.cmake`](#formatting-formattingcmake) + - [clang-format](#clang-format) + - [cmake-format](#cmake-format) + +## C++ Standards [`c++-standards.cmake`](c++-standards.cmake) + +Using the functions `cxx_11()`, `cxx_14()`, `cxx_17()` or `cxx_20()` this adds the appropriate flags for both unix and MSVC compilers, even for those before 3.11 with improper support. + +These obviously force the standard to be required, and also disables compiler-specific extensions, ie `--std=gnu++11`. This helps to prevent fragmenting the code base with items not available elsewhere, adhering to the agreed C++ standards only. + +## Sanitizer Builds [`sanitizers.cmake`](sanitizers.cmake) + +Sanitizers are tools that perform checks during a program’s runtime and returns issues, and as such, along with unit testing, code coverage and static analysis, is another tool to add to the programmers toolbox. And of course, like the previous tools, are tragically simple to add into any project using CMake, allowing any project and developer to quickly and easily use. + +A quick rundown of the tools available, and what they do: +- [LeakSanitizer](https://clang.llvm.org/docs/LeakSanitizer.html) detects memory leaks, or issues where memory is allocated and never deallocated, causing programs to slowly consume more and more memory, eventually leading to a crash. +- [AddressSanitizer](https://clang.llvm.org/docs/AddressSanitizer.html) is a fast memory error detector. It is useful for detecting most issues dealing with memory, such as: + - Out of bounds accesses to heap, stack, global + - Use after free + - Use after return + - Use after scope + - Double-free, invalid free + - Memory leaks (using LeakSanitizer) +- [ThreadSanitizer](https://clang.llvm.org/docs/ThreadSanitizer.html) detects data races for multi-threaded code. +- [UndefinedBehaviourSanitizer](https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html) detects the use of various features of C/C++ that are explicitly listed as resulting in undefined behaviour. Most notably: + - Using misaligned or null pointer. + - Signed integer overflow + - Conversion to, from, or between floating-point types which would overflow the destination + - Division by zero + - Unreachable code +- [MemorySanitizer](https://clang.llvm.org/docs/MemorySanitizer.html) detects uninitialized reads. + +These are used by declaring the `USE_SANITIZER` CMake variable as one of: +- Address +- Memory +- MemoryWithOrigins +- Undefined +- Thread +- Address;Undefined +- Undefined;Address +- Leak + +## Code Coverage [`code-coverage.cmake`](code-coverage.cmake) + + + +> In computer science, test coverage is a measure used to describe the degree to which the source code of a program is executed when a particular test suite runs. A program with high test coverage, measured as a percentage, has had more of its source code executed during testing, which suggests it has a lower chance of containing undetected software bugs compared to a program with low test coverage. Many different metrics can be used to calculate test coverage; some of the most basic are the percentage of program subroutines and the percentage of program statements called during execution of the test suite. +> +> [Wikipedia, Code Coverage](https://en.wikipedia.org/wiki/Code_coverage) + +Code coverage is the detailing of, during the execution of a binary, which regions, functions, or lines of code are *actually* executed. This can be used in a number of ways, from figuring out areas that automated testing is lacking or not touching, to giving a user an instrumented binary to determine which areas of code are used most/least to determine which areas to focus on. Although this does come with the caveat that coverage is no guarantee of good testing, just of what code has been. + +Coverage here is supported on both GCC and Clang. GCC requires the `lcov` program, and Clang requires `llvm-cov` and `llvm-profdata`, often provided with the llvm toolchain. + +To enable, turn on the `CODE_COVERAGE` variable. + +### Added Targets + +- GCOV/LCOV: + - ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-${TARNGET_NAME} : Generates HTML code coverage report for the associated named target. + - ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. + - ccov-all-capture : Generates an all-merged.info file, for use with coverage dashboards (e.g. codecov.io, coveralls). +- LLVM-COV: + - ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter. + - ccov-${TARGET_NAME} : Generates HTML code coverage report. + - ccov-rpt-${TARGET_NAME} : Prints to command line summary per-file coverage information. + - ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information. + - ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. + - ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line. + +### Usage + +To enable any code coverage instrumentation/targets, the single CMake option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or on the command line ie `-DCODE_COVERAGE=ON`. + +From this point, there are two primary methods for adding instrumentation to targets: +1. A blanket instrumentation by calling `add_code_coverage()`, where all targets in that directory and all subdirectories are automatically instrumented. +2. Per-target instrumentation by calling `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only that target is instrumented. This applies to both libraries and executables. + +To add coverage targets, such as calling `make ccov` to generate the actual coverage information for perusal or consumption, call `target_code_coverage(<TARGET_NAME>)` on an *executable* target. + +**NOTE:** For more options, please check the actual [`code-coverage.cmake`](code-coverage.cmake) file. + +#### Example 1 - All targets instrumented + +In this case, the coverage information reported will will be that of the `theLib` library target and `theExe` executable. + +##### 1a - Via global command + +``` +add_code_coverage() # Adds instrumentation to all targets + +add_library(theLib lib.cpp) + +add_executable(theExe main.cpp) +target_link_libraries(theExe PRIVATE theLib) +target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports. +``` + +##### 1b - Via target commands + +``` +add_library(theLib lib.cpp) +target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets. + +add_executable(theExe main.cpp) +target_link_libraries(theExe PRIVATE theLib) +target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports. +``` + +#### Example 2: Target instrumented, but with regex pattern of files to be excluded from report + +``` +add_executable(theExe main.cpp non_covered.cpp) +target_code_coverage(theExe EXCLUDE non_covered.cpp) # As an executable target, the reports will exclude the non-covered.cpp file. +``` + +#### Example 3: Target added to the 'ccov' and 'ccov-all' targets + +``` +add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders. + +add_executable(theExe main.cpp non_covered.cpp) +target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +``` + +## Compiler Options [`compiler-options.cmake`](compiler-options.cmake) + +Allows for easy use of some pre-made compiler options for the major compilers. + +Using `-DENABLE_ALL_WARNINGS=ON` will enable almost all of the warnings available for a compiler: + +| Compiler | Options | +| :------- | :------------ | +| MSVC | /W4 | +| GCC | -Wall -Wextra | +| Clang | -Wall -Wextra | + +Using `-DENABLE_EFFECTIVE_CXX=ON` adds the `-Weffc++` for both GCC and clang. + +Using `-DGENERATE_DEPENDENCY_DATA=ON` generates `.d` files along with regular object files on a per-source file basis on GCC/Clang compilers. These files contains the list of all header files used during compilation of that compilation unit. + +## Dependency Graph [`dependency-graph.cmake`](dependency-graph.cmake) + +CMake, with the dot application available, will build a visual representation of the library/executable dependencies, like so: + + +### Required Arguments + +#### OUTPUT_TYPE *STR* +The type of output of `dot` to produce. Can be whatever `dot` itself supports (eg. png, ps, pdf). + +### Optional Arguments + +#### ADD_TO_DEP_GRAPH +If specified, add this generated target to be a dependency of the more general `dep-graph` target. + +#### TARGET_NAME *STR* +The name to give the doc target. (Default: doc-${PROJECT_NAME}) + +#### OUTPUT_DIR *STR* +The directory to place the generated output + +## Doxygen [`doxygen.cmake`](doxygen.cmake) + +Builds doxygen documentation with a default 'Doxyfile.in' or with a specified one, and can make the results installable (under the `doc` install target) + +This can only be used once per project, as each target generated is as `doc-${PROJECT_NAME}` unless TARGET_NAME is specified. + +### Optional Arguments + +#### ADD_TO_DOC +If specified, adds this generated target to be a dependency of the more general `doc` target. + +#### INSTALLABLE +Adds the generated documentation to the generic `install` target, under the `documentation` installation group. + +#### PROCESS_DOXYFILE +If set, then will process the found Doxyfile through the CMAKE `configure_file` function for macro replacements before using it. (@ONLY) + +#### TARGET_NAME *STR* +The name to give the doc target. (Default: doc-${PROJECT_NAME}) + +#### OUTPUT_DIR *STR* +The directory to place the generated output. (Default: ${CMAKE_CURRENT_BINARY_DIR}/doc) + +#### INSTALL_PATH *STR* +The path to install the documenttation under. (if not specified, defaults to 'share/${PROJECT_NAME}) + +#### DOXYFILE_PATH *STR* +The given doxygen file to use/process. (Defaults to'${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile') + +## Prepare the Catch Test Framework [`prepare_catch.cmake`](prepare_catch.cmake) + +The included `prepare_catch` function contained within attempts to add the infrastructure necessary for automatically adding C/C++ tests using the Catch2 library, including either an interface or pre-compiled 'catch' target library. + +It first attempts to find the header on the local machine, and failing that, clones the single header variant for use. It does make the determination between pre-C++11 and will use Catch1.X rather than Catch2 (when cloned), automatically or forced.. Adds a subdirectory of tests/ if it exists from the macro's calling location. + +### Optional Arguments + +#### COMPILED_CATCH +If this option is specified, then generates the 'catch' target as a library with catch already pre-compiled as part of the library. Otherwise acts just an interface library for the header location. + +#### CATCH1 +Force the use of Catch1.X, rather than auto-detecting the C++ version in use. + +#### CLONE +Force cloning of Catch, rather than attempting to use a locally-found variant. + +## Tools [`tools.cmake`](tools.cmake) + +### clang-tidy + +> clang-tidy is a clang-based C++ “linter” tool. Its purpose is to provide an extensible framework for diagnosing and fixing typical programming errors, like style violations, interface misuse, or bugs that can be deduced via static analysis. clang-tidy is modular and provides a convenient interface for writing new checks. +> +> [clang-tidy page](https://clang.llvm.org/extra/clang-tidy/) + +When detected, [clang-tidy](https://clang.llvm.org/extra/clang-tidy/) can be enabled by using the option of `-DCLANG_TIDY=ON`, as it is disabled by default. + +To use, add the `clang_tidy()` function, with the arguments being the options to pass to the clang tidy program, such as '-checks=*'. + +### include-what-you-use + +This tool helps to organize headers for all files encompass all items being used in that file, without accidentally relying upon headers deep down a chain of other headers. This is disabled by default, and can be enabled via have the program installed and adding `-DIWYU=ON`. + +To use, add the `include_what_you_use()` function, with the arguments being the options to pass to the program. + +### cppcheck + +This tool is another static analyzer in the vein of clang-tidy, which focuses on having no false positives. This is by default disabled, and can be enabled via have the program installed and adding `-DCPPCHECK=ON`. + +To use, add the `cppcheck()` function, with the arguments being the options to pass to the program. + +## Formatting [`formatting.cmake`](formatting.cmake) + +### clang-format + +Allows to automatically perform code formatting using the clang-format program, by calling an easy-to-use target ala `make format`. It requires a target name, and the list of files to format. As well, if the target name is the name of another target, then all files associated with that target will be added, and the target name changed to be `format_<TARGET>`. As well, any targets otherwise listed with the files will also have their files imported for formatting. + +``` +file(GLOB_RECURSE ALL_CODE_FILES + ${PROJECT_SOURCE_DIR}/src/*.[ch]pp + ${PROJECT_SOURCE_DIR}/src/*.[ch] + ${PROJECT_SOURCE_DIR}/include/*.[h]pp + ${PROJECT_SOURCE_DIR}/include/*.[h] + ${PROJECT_SOURCE_DIR}/example/*.[ch]pp + ${PROJECT_SOURCE_DIR}/example/*.[ch] +) + +clang_format(TARGET_NAME ${ALL_CODE_FILES}) +``` + +### cmake-format + +Similar to the clang-format above, creates a target `cmake-format` when the `cmake_format(<FILES>)` function is defined in CMake scripts, and any <FILES> passed in will be formatted by the cmake-format program, if it is found. + +``` +file(GLOB_RECURSE CMAKE_FILES + CMakeLists.txt +) + +cmake_format(TARGET_NAME ${CMAKE_FILES}) +```
\ No newline at end of file diff --git a/config/sanitizer/code-coverage.cmake b/config/sanitizer/code-coverage.cmake new file mode 100644 index 0000000..8d765f7 --- /dev/null +++ b/config/sanitizer/code-coverage.cmake @@ -0,0 +1,536 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +# USAGE: To enable any code coverage instrumentation/targets, the single CMake +# option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or +# on the command line. +# +# From this point, there are two primary methods for adding instrumentation to +# targets: 1 - A blanket instrumentation by calling `add_code_coverage()`, where +# all targets in that directory and all subdirectories are automatically +# instrumented. 2 - Per-target instrumentation by calling +# `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only +# that target is instrumented. This applies to both libraries and executables. +# +# To add coverage targets, such as calling `make ccov` to generate the actual +# coverage information for perusal or consumption, call +# `target_code_coverage(<TARGET_NAME>)` on an *executable* target. +# +# Example 1: All targets instrumented +# +# In this case, the coverage information reported will will be that of the +# `theLib` library target and `theExe` executable. +# +# 1a: Via global command +# +# ~~~ +# add_code_coverage() # Adds instrumentation to all targets +# +# add_library(theLib lib.cpp) +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports. +# ~~~ +# +# 1b: Via target commands +# +# ~~~ +# add_library(theLib lib.cpp) +# target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets. +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports. +# ~~~ +# +# Example 2: Target instrumented, but with regex pattern of files to be excluded +# from report +# +# ~~~ +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe EXCLUDE non_covered.cpp test/*) # As an executable target, the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ +# +# Example 3: Target added to the 'ccov' and 'ccov-all' targets +# +# ~~~ +# add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders. +# +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ + +# Options +option( + CODE_COVERAGE + "Builds targets with code coverage instrumentation. (Requires GCC or Clang)" + OFF) + +# Programs +find_program(LLVM_COV_PATH llvm-cov) +find_program(LLVM_PROFDATA_PATH llvm-profdata) +find_program(LCOV_PATH lcov) +find_program(GENHTML_PATH genhtml) + +# Variables +set(CMAKE_COVERAGE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/ccov) + +# Common initialization/checks +if(CODE_COVERAGE AND NOT CODE_COVERAGE_ADDED) + set(CODE_COVERAGE_ADDED ON) + + # Common Targets + add_custom_target( + ccov-preprocessing + COMMAND ${CMAKE_COMMAND} -E make_directory + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY} + DEPENDS ccov-clean) + + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + # Messages + message(STATUS "Building with llvm Code Coverage Tools") + + if(NOT LLVM_COV_PATH) + message(FATAL_ERROR "llvm-cov not found! Aborting.") + else() + # Version number checking for 'EXCLUDE' compatibility + execute_process(COMMAND ${LLVM_COV_PATH} --version + OUTPUT_VARIABLE LLVM_COV_VERSION_CALL_OUTPUT) + string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" LLVM_COV_VERSION + ${LLVM_COV_VERSION_CALL_OUTPUT}) + + if(LLVM_COV_VERSION VERSION_LESS "7.0.0") + message( + WARNING + "target_code_coverage()/add_code_coverage_all_targets() 'EXCLUDE' option only available on llvm-cov >= 7.0.0" + ) + endif() + endif() + + # Targets + add_custom_target( + ccov-clean + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list) + + # Used to get the shared object file list before doing the main all- + # processing + add_custom_target( + ccov-libs + COMMAND ; + COMMENT "libs ready for coverage report.") + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + # Messages + message(STATUS "Building with lcov Code Coverage Tools") + + if(CMAKE_BUILD_TYPE) + string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type) + if(NOT ${upper_build_type} STREQUAL "DEBUG") + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + else() + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + if(NOT LCOV_PATH) + message(FATAL_ERROR "lcov not found! Aborting...") + endif() + if(NOT GENHTML_PATH) + message(FATAL_ERROR "genhtml not found! Aborting...") + endif() + + # Targets + add_custom_target(ccov-clean COMMAND ${LCOV_PATH} --directory + ${CMAKE_BINARY_DIR} --zerocounters) + + else() + set(CODE_COVERAGE_ADDED OFF) + message(STATUS "Code coverage requires Clang or GCC.(${CMAKE_C_COMPILER_ID})") + endif() +endif() + +# Adds code coverage instrumentation to a library, or instrumentation/targets +# for an executable target. +# ~~~ +# EXECUTABLE ADDED TARGETS: +# GCOV/LCOV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report for the associated named target. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# +# LLVM-COV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report. +# ccov-report-${TARGET_NAME} : Prints to command line summary per-file coverage information. +# ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line. +# +# Required: +# TARGET_NAME - Name of the target to generate code coverage for. +# Optional: +# AUTO - Adds the target to the 'ccov' target so that it can be run in a batch with others easily. Effective on executable targets. +# ALL - Adds the target to the 'ccov-all' and 'ccov-all-report' targets, which merge several executable targets coverage data to a single report. Effective on executable targets. +# EXTERNAL - For GCC's lcov, allows the profiling of 'external' files from the processing directory +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the patterns provided from coverage. **These do not copy to the 'all' targets.** +# OBJECTS <TARGETS> - For executables ONLY, if the provided targets are shared libraries, adds coverage information to the output +# ~~~ +function(target_code_coverage TARGET_NAME) + # Argument parsing + set(options AUTO ALL EXTERNAL) + set(multi_value_keywords EXCLUDE OBJECTS) + cmake_parse_arguments(target_code_coverage "${options}" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + + # Add code coverage instrumentation to the target's linker command + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-instr-generate + -fcoverage-mapping) + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fprofile-instr-generate ") + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fcoverage-mapping ") + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-arcs + -ftest-coverage) + target_link_libraries(${TARGET_NAME} PRIVATE gcov) + endif() + + # Targets + get_target_property(target_type ${TARGET_NAME} TYPE) + + # Add shared library to processing for 'all' targets + if(target_type STREQUAL "SHARED_LIBRARY" AND target_code_coverage_ALL) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + if(NOT TARGET ccov-libs) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-libs ccov-run-${TARGET_NAME}) + endif() + endif() + + # For executables add targets to run and produce output + if(target_type STREQUAL "EXECUTABLE") + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?Cc]lang") + + # If there are shared objects to also work with, generate the string to + # add them here + foreach(SO_TARGET ${target_code_coverage_OBJECTS}) + # Check to see if the target is a shared object + if(TARGET ${SO_TARGET}) + get_target_property(SO_TARGET_TYPE ${SO_TARGET} TYPE) + if(${SO_TARGET_TYPE} STREQUAL "SHARED_LIBRARY") + set(SO_OBJECTS ${SO_OBJECTS} -object=$<TARGET_FILE:${SO_TARGET}>) + endif() + endif() + endforeach() + + # Run the executable, generating raw profile data + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND LLVM_PROFILE_FILE=${TARGET_NAME}.profraw + $<TARGET_FILE:${TARGET_NAME}> + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND echo "${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}.profraw " >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list + DEPENDS ccov-preprocessing ccov-libs ${TARGET_NAME}) + + # Merge the generated profile data so llvm-cov can process it + add_custom_target( + ccov-processing-${TARGET_NAME} + COMMAND ${LLVM_PROFDATA_PATH} merge -sparse ${TARGET_NAME}.profraw -o + ${TARGET_NAME}.profdata + DEPENDS ccov-run-${TARGET_NAME}) + + # Ignore regex only works on LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print out details of the coverage information to the command line + add_custom_target( + ccov-show-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Print out a summary of the coverage information to the command line + add_custom_target( + ccov-report-${TARGET_NAME} + COMMAND ${LLVM_COV_PATH} report $<TARGET_FILE:${TARGET_NAME}> + ${SO_OBJECTS} -instr-profile=${TARGET_NAME}.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO + "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}.info") + + # Run the executable, generating coverage information + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND $<TARGET_FILE:${TARGET_NAME}> + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generate exclusion string for use + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + if(NOT ${target_code_coverage_EXTERNAL}) + set(EXTERNAL_OPTION --no-external) + endif() + + # Capture coverage data + add_custom_target( + ccov-capture-${TARGET_NAME} + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters + COMMAND $<TARGET_FILE:${TARGET_NAME}> + COMMAND + ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory + ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file + ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND ${GENHTML_PATH} -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + ${COVERAGE_INFO} + DEPENDS ccov-capture-${TARGET_NAME}) + endif() + + add_custom_command( + TARGET ccov-${TARGET_NAME} + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}/index.html in your browser to view the coverage report." + ) + + # AUTO + if(target_code_coverage_AUTO) + if(NOT TARGET ccov) + add_custom_target(ccov) + endif() + add_dependencies(ccov ccov-${TARGET_NAME}) + + if(NOT CMAKE_COMPILER_IS_GNUCXX) + if(NOT TARGET ccov-report) + add_custom_target(ccov-report) + endif() + add_dependencies(ccov-report ccov-report-${TARGET_NAME}) + endif() + endif() + + # ALL + if(target_code_coverage_ALL) + if(NOT TARGET ccov-all-processing) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-all-processing ccov-run-${TARGET_NAME}) + endif() + endif() + endif() +endfunction() + +# Adds code coverage instrumentation to all targets in the current directory and +# any subdirectories. To add coverage instrumentation to only specific targets, +# use `target_code_coverage`. +function(add_code_coverage) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_compile_options(-fprofile-instr-generate -fcoverage-mapping) + add_link_options(-fprofile-instr-generate -fcoverage-mapping) + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + add_compile_options(-fprofile-arcs -ftest-coverage) + link_libraries(gcov) + endif() +endfunction() + +# Adds the 'ccov-all' type targets that calls all targets added via +# `target_code_coverage` with the `ALL` parameter, but merges all the coverage +# data from them into a single large report instead of the numerous smaller +# reports. Also adds the ccov-all-capture Generates an all-merged.info file, for +# use with coverage dashboards (e.g. codecov.io, coveralls). +# ~~~ +# Optional: +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the regex patterns provided from coverage. +# ~~~ +function(add_code_coverage_all_targets) + # Argument parsing + set(multi_value_keywords EXCLUDE) + cmake_parse_arguments(add_code_coverage_all_targets "" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + + # Merge the profile data for all of the run executables + add_custom_target( + ccov-all-processing + COMMAND + ${LLVM_PROFDATA_PATH} merge -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata -sparse `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list`) + + # Regex exclude only available for LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print summary of the code coverage information to the command line + add_custom_target( + ccov-all-report + COMMAND + ${LLVM_COV_PATH} report `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + # Export coverage information so continuous integration tools (e.g. + # Jenkins) can consume it + add_custom_target( + ccov-all-export + COMMAND + ${LLVM_COV_PATH} export `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -format="text" ${EXCLUDE_REGEX} > + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json + DEPENDS ccov-all-processing) + + # Generate HTML output of all added targets for perusal + add_custom_target( + ccov-all + COMMAND + ${LLVM_COV_PATH} show `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.info") + + # Nothing required for gcov + add_custom_target(ccov-all-processing COMMAND ;) + + # Exclusion regex string creation + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + # Capture coverage data + add_custom_target( + ccov-all-capture + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture + --output-file ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-all-processing) + + # Generates HTML output of all targets for perusal + add_custom_target( + ccov-all + COMMAND ${GENHTML_PATH} -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + ${COVERAGE_INFO} + DEPENDS ccov-all-capture) + + endif() + + add_custom_command( + TARGET ccov-all + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged/index.html in your browser to view the coverage report." + ) + endif() +endfunction() diff --git a/config/sanitizer/sanitizers.cmake b/config/sanitizer/sanitizers.cmake new file mode 100644 index 0000000..0803279 --- /dev/null +++ b/config/sanitizer/sanitizers.cmake @@ -0,0 +1,94 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +set(USE_SANITIZER + "" + CACHE + STRING + "Compile with a sanitizer. Options are: Address, Memory, MemoryWithOrigins, Undefined, Thread, Leak, 'Address;Undefined'" +) + +function(append value) + foreach(variable ${ARGN}) + set(${variable} + "${${variable}} ${value}" + PARENT_SCOPE) + endforeach(variable) +endfunction() + +message(STATUS "USE_SANITIZER=${USE_SANITIZER}, CMAKE_C_COMPILER_ID=${CMAKE_C_COMPILER_ID}") +if(USE_SANITIZER) + if(INTEL_CLANG OR "${CMAKE_C_COMPILER_ID}" MATCHES "Clang") + set(CMAKE_EXPORT_COMPILE_COMMANDS ON) + + append("-fno-omit-frame-pointer" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + message(STATUS "Building with sanitize, base flags=${CMAKE_C_SANITIZER_FLAGS}") + + if(UNIX) + if(uppercase_CMAKE_BUILD_TYPE STREQUAL "DEBUG") + append("-O1" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + endif() + + if(USE_SANITIZER MATCHES "([Aa]ddress);([Uu]ndefined)" + OR USE_SANITIZER MATCHES "([Uu]ndefined);([Aa]ddress)") + message(STATUS "Building with Address, Undefined sanitizers") + append("-fsanitize=address,undefined" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE AddressSanitizer) + elseif(USE_SANITIZER MATCHES "([Aa]ddress)") + # Optional: -fno-optimize-sibling-calls -fsanitize-address-use-after-scope + message(STATUS "Building with Address sanitizer") + append("-fsanitize=address" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE AddressSanitizer) + elseif(USE_SANITIZER MATCHES "([Mm]emory([Ww]ith[Oo]rigins)?)") + # Optional: -fno-optimize-sibling-calls -fsanitize-memory-track-origins=2 + append("-fsanitize=memory" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + if(USE_SANITIZER MATCHES "([Mm]emory[Ww]ith[Oo]rigins)") + message(STATUS "Building with MemoryWithOrigins sanitizer") + append("-fsanitize-memory-track-origins" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + else() + message(STATUS "Building with Memory sanitizer") + endif() + set(MEMCHECK_TYPE MemorySanitizer) + elseif(USE_SANITIZER MATCHES "([Uu]ndefined)") + message(STATUS "Building with Undefined sanitizer") + append("-fsanitize=undefined" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + if(EXISTS "${BLACKLIST_FILE}") + append("-fsanitize-blacklist=${BLACKLIST_FILE}" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + endif() + set(MEMCHECK_TYPE UndefinedBehaviorSanitizer) + elseif(USE_SANITIZER MATCHES "([Tt]hread)") + message(STATUS "Building with Thread sanitizer") + append("-fsanitize=thread" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE ThreadSanitizer) + elseif(USE_SANITIZER MATCHES "([Ll]eak)") + message(STATUS "Building with Leak sanitizer") + append("-fsanitize=leak" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + set(MEMCHECK_TYPE LeakSanitizer) + else() + message( + FATAL_ERROR "Unsupported value of USE_SANITIZER: ${USE_SANITIZER}") + endif() + elseif(MSVC) + if(USE_SANITIZER MATCHES "([Aa]ddress)") + message(STATUS "Building with Address sanitizer") + append("-fsanitize=address" CMAKE_C_SANITIZER_FLAGS CMAKE_CXX_SANITIZER_FLAGS) + else() + message(FATAL_ERROR "This sanitizer not yet supported in the MSVC environment: ${USE_SANITIZER}") + endif() + else() + message(FATAL_ERROR "USE_SANITIZER is not supported on this platform.") + endif() + endif() +endif() diff --git a/config/sanitizer/tools.cmake b/config/sanitizer/tools.cmake new file mode 100644 index 0000000..a44022f --- /dev/null +++ b/config/sanitizer/tools.cmake @@ -0,0 +1,111 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +option(CLANG_TIDY "Turns on clang-tidy processing if it is found." OFF) +option(IWYU "Turns on include-what-you-use processing if it is found." OFF) +option(CPPCHECK "Turns on cppcheck processing if it is found." OFF) + +# Adds clang-tidy checks to the compilation, with the given arguments being used +# as the options set. +macro(clang_tidy) + if(CLANG_TIDY AND CLANG_TIDY_EXE) + set(CMAKE_CXX_CLANG_TIDY ${CLANG_TIDY_EXE} ${ARGN}) + endif() +endmacro() + +# Adds include_what_you_use to the compilation, with the given arguments being +# used as the options set. +macro(include_what_you_use) + if(IWYU AND IWYU_EXE) + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE "${IWYU_EXE};${IWYU_STRING}") + endif() +endmacro() + +# Adds cppcheck to the compilation, with the given arguments being used as the +# options set. +macro(cppcheck) + if(CPPCHECK AND CPPCHECK_EXE) + set(CMAKE_CXX_CPPCHECK "${CPPCHECK_EXE};${CPPCHECK_STRING}") + endif() +endmacro() + +find_program(CLANG_TIDY_EXE NAMES "clang-tidy") +if(CLANG_TIDY_EXE) + message(STATUS "clang-tidy found: ${CLANG_TIDY_EXE}") + if(NOT CLANG_TIDY) + message(STATUS "clang-tidy NOT ENABLED via 'CLANG_TIDY' variable!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(CLANG_TIDY) + message(SEND_ERROR "Cannot enable clang-tidy, as executable not found!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "clang-tidy not found!") + set(CMAKE_CXX_CLANG_TIDY + "" + CACHE STRING "" FORCE) # delete it +endif() + +find_program(IWYU_EXE NAMES "include-what-you-use") +if(IWYU_EXE) + message(STATUS "include-what-you-use found: ${IWYU_EXE}") + if(NOT IWYU) + message(STATUS "include-what-you-use NOT ENABLED via 'IWYU' variable!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(IWYU) + message( + SEND_ERROR "Cannot enable include-what-you-use, as executable not found!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "include-what-you-use not found!") + set(CMAKE_CXX_INCLUDE_WHAT_YOU_USE + "" + CACHE STRING "" FORCE) # delete it +endif() + +find_program(CPPCHECK_EXE NAMES "cppcheck") +if(CPPCHECK_EXE) + message(STATUS "cppcheck found: ${CPPCHECK_EXE}") + if(CPPECHECK) + set(CMAKE_CXX_CPPCHECK + "${CPPCHECK_EXE};--enable=warning,performance,portability,missingInclude;--template=\"[{severity}][{id}] {message} {callstack} \(On {file}:{line}\)\";--suppress=missingIncludeSystem;--quiet;--verbose;--force" + ) + endif() + if(NOT CPPCHECK) + message(STATUS "cppcheck NOT ENABLED via 'CPPCHECK' variable!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it + endif() +elseif(CPPCHECK) + message(SEND_ERROR "Cannot enable cppcheck, as executable not found!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it +else() + message(STATUS "cppcheck not found!") + set(CMAKE_CXX_CPPCHECK + "" + CACHE STRING "" FORCE) # delete it +endif() diff --git a/config/toolchain/build32.cmake b/config/toolchain/build32.cmake index deb5899..a2566c3 100644 --- a/config/toolchain/build32.cmake +++ b/config/toolchain/build32.cmake @@ -5,10 +5,11 @@ elseif(APPLE) set (CMAKE_OSX_ARCHITECTURES "i386") elseif(MINGW) set (CMAKE_SYSTEM_NAME Windows) - set (CMAKE_C_COMPILER i686-w64-mingw32-gcc) - set (CMAKE_CXX_COMPILER i686-w64-mingw32-g++) - set (CMAKE_RC_COMPILER i686-w64-mingw32-windres) - set (CMAKE_Fortran_COMPILER i686-w64-mingw32-gfortran) + set (TOOLCHAIN_PREFIX i686-w64-mingw32) + set (CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}-gcc) + set (CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}-g++) + set (CMAKE_RC_COMPILER ${TOOLCHAIN_PREFIX}-windres) + set (CMAKE_Fortran_COMPILER ${TOOLCHAIN_PREFIX}-gfortran) set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -m32" CACHE STRING "c++ flags") set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -m32" CACHE STRING "c flags") @@ -34,11 +35,14 @@ elseif(MINGW) set (ENV{PKG_CONFIG_LIBDIR} ${LIB32}/pkgconfig:/usr/share/pkgconfig:/usr/lib/pkgconfig:/usr/lib64/pkgconfig) endif () - set (CMAKE_FIND_ROOT_PATH /usr/i686-w64-mingw32) + set (CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX}) set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) - set (CMAKE_CROSSCOMPILING_EMULATOR wine32) + set (CMAKE_CROSSCOMPILING_EMULATOR wine) + + include_directories(/usr/${TOOLCHAIN_PREFIX}/include) + set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS On CACHE BOOL "Export windows symbols") else () set (CMAKE_SYSTEM_NAME Linux) @@ -72,4 +76,4 @@ else () # for libraries and headers in the target directories set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) -endif ()
\ No newline at end of file +endif () diff --git a/config/toolchain/intel.cmake b/config/toolchain/intel.cmake index 97f6a64..ae1d2f8 100644 --- a/config/toolchain/intel.cmake +++ b/config/toolchain/intel.cmake @@ -3,9 +3,16 @@ set(CMAKE_COMPILER_VENDOR "intel") -set(CMAKE_C_COMPILER icc) -set(CMAKE_CXX_COMPILER icpc) -set(CMAKE_Fortran_COMPILER ifort) +if(USE_SANITIZER) + set(CMAKE_C_COMPILER icl) + set(CMAKE_CXX_COMPILER icl++) + set(CMAKE_Fortran_COMPILER ifort) + set(INTEL_CLANG ON) +else () + set(CMAKE_C_COMPILER icc) + set(CMAKE_CXX_COMPILER icpc) + set(CMAKE_Fortran_COMPILER ifort) +endif () # the following is used if cross-compiling set(CMAKE_CROSSCOMPILING_EMULATOR "") diff --git a/config/toolchain/mingw64.cmake b/config/toolchain/mingw64.cmake index fde5e38..1830488 100644 --- a/config/toolchain/mingw64.cmake +++ b/config/toolchain/mingw64.cmake @@ -4,11 +4,11 @@ set (CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}-gcc) set (CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}-g++) set (CMAKE_RC_COMPILER ${TOOLCHAIN_PREFIX}-windres) set (CMAKE_Fortran_COMPILER ${TOOLCHAIN_PREFIX}-gfortran) -set (CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX} /usr/local/${TOOLCHAIN_PREFIX}) +set (CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX}) set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) set (CMAKE_CROSSCOMPILING_EMULATOR wine64) -include_directories(/usr/local/${TOOLCHAIN_PREFIX}/include) +include_directories(/usr/${TOOLCHAIN_PREFIX}/include) set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS On CACHE BOOL "Export windows symbols") |