diff options
Diffstat (limited to 'config')
-rw-r--r-- | config/cmake/ConfigureChecks.cmake | 17 | ||||
-rw-r--r-- | config/cmake/ConversionTests.c | 167 | ||||
-rw-r--r-- | config/cmake/HDFCompilerFlags.cmake | 4 | ||||
-rw-r--r-- | config/cmake_ext_mod/CheckTypeSize.cmake | 61 | ||||
-rw-r--r-- | config/cmake_ext_mod/ConfigureChecks.cmake | 28 | ||||
-rw-r--r-- | config/cmake_ext_mod/HDFTests.c | 14 |
6 files changed, 120 insertions, 171 deletions
diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake index 77918a4..85e0492 100644 --- a/config/cmake/ConfigureChecks.cmake +++ b/config/cmake/ConfigureChecks.cmake @@ -173,7 +173,7 @@ endif () # Macro to determine the various conversion capabilities #----------------------------------------------------------------------------- macro (H5ConversionTests TEST msg) - if ("${TEST}" MATCHES "^${TEST}$") + if (NOT DEFINED ${TEST}) # message (STATUS "===> ${TEST}") TRY_RUN (${TEST}_RUN ${TEST}_COMPILE ${CMAKE_BINARY_DIR} @@ -204,21 +204,6 @@ macro (H5ConversionTests TEST msg) endmacro () #----------------------------------------------------------------------------- -# Macro to make some of the conversion tests easier to write/read -#----------------------------------------------------------------------------- -macro (H5MiscConversionTest VAR TEST msg) - if ("${TEST}" MATCHES "^${TEST}$") - if (${VAR}) - set (${TEST} 1 CACHE INTERNAL ${msg}) - message (STATUS "${msg}... yes") - else () - set (${TEST} "" CACHE INTERNAL ${msg}) - message (STATUS "${msg}... no") - endif () - endif () -endmacro () - -#----------------------------------------------------------------------------- # Check various conversion capabilities #----------------------------------------------------------------------------- diff --git a/config/cmake/ConversionTests.c b/config/cmake/ConversionTests.c index 082dbd4..002bc88 100644 --- a/config/cmake/ConversionTests.c +++ b/config/cmake/ConversionTests.c @@ -9,12 +9,23 @@ * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ ++ +#if defined(__has_attribute) +#if __has_attribute(no_sanitize) +#define HDF_NO_UBSAN __attribute__((no_sanitize("undefined"))) +#else +#define HDF_NO_UBSAN +#endif +#else +#define HDF_NO_UBSAN +#endif + #ifdef H5_LDOUBLE_TO_LONG_SPECIAL_TEST #include <string.h> #include <stdlib.h> -int main(void) +int main(void) HDF_NO_UBSAN { long double ld = 20041683600089727.779961L; long ll; @@ -24,44 +35,44 @@ int main(void) int ret = 1; if(sizeof(long double) == 16 && sizeof(long) == 8) { - /*make sure the long double type has 16 bytes in size and - * 11 bits of exponent. If it is, - *the bit sequence should be like below. It's not - *a decent way to check but this info isn't available. */ - memcpy(s, &ld, 16); - if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 && - s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 && - s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) { - - /* Assign the hexadecimal value of long double type. */ - s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3; - s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0; - s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c; - s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20; - - memcpy(&ld, s, 16); - - ll = (long)ld; - memcpy(s2, &ll, 8); - - /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82 - * and gets wrong value 20041683600089730 on the IBM Power6 Linux. - * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f - * and gets the correct value 20041683600089727. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && - s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) - ret = 0; - - ull = (unsigned long)ld; - memcpy(s2, &ull, 8); - - /* The unsigned long is the same as signed long. */ - if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && - s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) - ret = 0; - } + /*make sure the long double type has 16 bytes in size and + * 11 bits of exponent. If it is, + *the bit sequence should be like below. It's not + *a decent way to check but this info isn't available. */ + memcpy(s, &ld, 16); + if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 && + s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 && + s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) { + + /* Assign the hexadecimal value of long double type. */ + s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3; + s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0; + s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c; + s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20; + + memcpy(&ld, s, 16); + + ll = (long)ld; + memcpy(s2, &ll, 8); + + /* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82 + * and gets wrong value 20041683600089730 on the IBM Power6 Linux. + * But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f + * and gets the correct value 20041683600089727. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && + s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) + ret = 0; + + ull = (unsigned long)ld; + memcpy(s2, &ull, 8); + + /* The unsigned long is the same as signed long. */ + if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce && + s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f) + ret = 0; + } } done: @@ -75,7 +86,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int main(void) HDF_NO_UBSAN { long double ld; long ll; @@ -86,46 +97,46 @@ int main(void) /*Determine if long double has 16 byte in size, 11 bit exponent, and *the bias is 0x3ff */ if(sizeof(long double) == 16) { - ld = 1.0L; - memcpy(s, &ld, 16); - if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00) - flag = 1; + ld = 1.0L; + memcpy(s, &ld, 16); + if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00) + flag = 1; } if(flag==1 && sizeof(long)==8) { - ll = 0x003fffffffffffffL; - ld = (long double)ll; - memcpy(s, &ld, 16); - /* The library converts the value to 0x434fffffffffffff8000000000000000. - * In decimal it is 18014398509481982.000000, one value short of the original. - * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000. - * The value is correct in decimal. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && - s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && - s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) - ret = 0; + ll = 0x003fffffffffffffL; + ld = (long double)ll; + memcpy(s, &ld, 16); + /* The library converts the value to 0x434fffffffffffff8000000000000000. + * In decimal it is 18014398509481982.000000, one value short of the original. + * The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000. + * The value is correct in decimal. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && + s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && + s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) + ret = 0; } if(flag==1 && sizeof(unsigned long)==8) { - ull = 0xffffffffffffffffUL; - ld = (long double)ull; - memcpy(s, &ld, 16); - /* Use a different value from signed long to test. The problem is the same - * for both long and unsigned long. The value is 18446744073709551615. - * The library converts the value to 0x43effffffffffffffe000000000000000. - * In decimal it's 18446744073709548544.000000, very different from the original. - * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000. - * The value is correct in decimal. It uses some special - * algorithm. We're going to define the macro and skip the test until - * we can figure out how they do it. */ - if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && - s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && - s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && - s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) - ret = 0; + ull = 0xffffffffffffffffUL; + ld = (long double)ull; + memcpy(s, &ld, 16); + /* Use a different value from signed long to test. The problem is the same + * for both long and unsigned long. The value is 18446744073709551615. + * The library converts the value to 0x43effffffffffffffe000000000000000. + * In decimal it's 18446744073709548544.000000, very different from the original. + * The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000. + * The value is correct in decimal. It uses some special + * algorithm. We're going to define the macro and skip the test until + * we can figure out how they do it. */ + if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 && + s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 && + s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 && + s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00) + ret = 0; } done: exit(ret); @@ -138,7 +149,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int main(void) HDF_NO_UBSAN { long double ld = 20041683600089727.779961L; long long ll; @@ -181,7 +192,7 @@ done: #include <string.h> #include <stdlib.h> -int main(void) +int main(void) HDF_NO_UBSAN { long double ld; long long ll; @@ -243,7 +254,7 @@ int FC_DUMMY_MAIN() #endif #endif int -main () +main () HDF_NO_UBSAN { char *chp = "beefs"; diff --git a/config/cmake/HDFCompilerFlags.cmake b/config/cmake/HDFCompilerFlags.cmake index a414cea..56277fa 100644 --- a/config/cmake/HDFCompilerFlags.cmake +++ b/config/cmake/HDFCompilerFlags.cmake @@ -49,9 +49,9 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) if (MSVC) set (HDF5_WARNINGS_BLOCKED 1) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /w") + set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W0") string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /w") + set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W0") endif () if (WIN32) add_definitions (-D_CRT_SECURE_NO_WARNINGS) diff --git a/config/cmake_ext_mod/CheckTypeSize.cmake b/config/cmake_ext_mod/CheckTypeSize.cmake deleted file mode 100644 index c14c2f2..0000000 --- a/config/cmake_ext_mod/CheckTypeSize.cmake +++ /dev/null @@ -1,61 +0,0 @@ -# -# Copyright by The HDF Group. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -# -# -# Check if the type exists and determine size of type. if the type -# exists, the size will be stored to the variable. -# -# CHECK_TYPE_SIZE - macro which checks the size of type -# VARIABLE - variable to store size if the type exists. -# HAVE_${VARIABLE} - does the variable exists or not -# - -macro (HDF_CHECK_TYPE_SIZE TYPE VARIABLE) - set (CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS 1) - if ("HAVE_${VARIABLE}" MATCHES "^HAVE_${VARIABLE}$") - set (MACRO_CHECK_TYPE_SIZE_FLAGS - "-DCHECK_TYPE_SIZE_TYPE=\"${TYPE}\" ${CMAKE_REQUIRED_FLAGS}" - ) - foreach (def HAVE_SYS_TYPES_H HAVE_STDINT_H HAVE_STDDEF_H HAVE_INTTYPES_H) - if ("${def}") - set (MACRO_CHECK_TYPE_SIZE_FLAGS "${MACRO_CHECK_TYPE_SIZE_FLAGS} -D${def}") - endif () - endforeach () - - message (STATUS "Check size of ${TYPE}") - if (CMAKE_REQUIRED_LIBRARIES) - set (CHECK_TYPE_SIZE_ADD_LIBRARIES - "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}" - ) - endif () - try_run (${VARIABLE} HAVE_${VARIABLE} - ${CMAKE_BINARY_DIR} - ${HDF_RESOURCES_EXT_DIR}/CheckTypeSize.c - CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_TYPE_SIZE_FLAGS} - "${CHECK_TYPE_SIZE_ADD_LIBRARIES}" - OUTPUT_VARIABLE OUTPUT - ) - if (HAVE_${VARIABLE}) - message (STATUS "Check size of ${TYPE} - done") - file (APPEND - ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeOutput.log - "Determining size of ${TYPE} passed with the following output:\n${OUTPUT}\n\n" - ) - else () - message (STATUS "Check size of ${TYPE} - failed") - file (APPEND - ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeError.log - "Determining size of ${TYPE} failed with the following output:\n${OUTPUT}\n\n" - ) - endif () - endif () - set (CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS) -endmacro () diff --git a/config/cmake_ext_mod/ConfigureChecks.cmake b/config/cmake_ext_mod/ConfigureChecks.cmake index 56d45f9..3797768 100644 --- a/config/cmake_ext_mod/ConfigureChecks.cmake +++ b/config/cmake_ext_mod/ConfigureChecks.cmake @@ -12,18 +12,18 @@ #----------------------------------------------------------------------------- # Include all the necessary files for macros #----------------------------------------------------------------------------- -include (${CMAKE_ROOT}/Modules/CheckFunctionExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFile.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFileCXX.cmake) -include (${CMAKE_ROOT}/Modules/CheckIncludeFiles.cmake) -include (${CMAKE_ROOT}/Modules/CheckLibraryExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckSymbolExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckTypeSize.cmake) -include (${CMAKE_ROOT}/Modules/CheckVariableExists.cmake) -include (${CMAKE_ROOT}/Modules/CheckFortranFunctionExists.cmake) -include (${CMAKE_ROOT}/Modules/TestBigEndian.cmake) +include (CheckFunctionExists) +include (CheckIncludeFile) +include (CheckIncludeFileCXX) +include (CheckIncludeFiles) +include (CheckLibraryExists) +include (CheckSymbolExists) +include (CheckTypeSize) +include (CheckVariableExists) +include (CheckFortranFunctionExists) +include (TestBigEndian) if (CMAKE_CXX_COMPILER AND CMAKE_CXX_COMPILER_LOADED) - include (${CMAKE_ROOT}/Modules/TestForSTDNamespace.cmake) + include (TestForSTDNamespace) endif () #----------------------------------------------------------------------------- @@ -145,7 +145,7 @@ endif () # For other specific tests, use this MACRO. macro (HDF_FUNCTION_TEST OTHER_TEST) - if ("${HDF_PREFIX}_${OTHER_TEST}" MATCHES "^${HDF_PREFIX}_${OTHER_TEST}$") + if (NOT DEFINED ${HDF_PREFIX}_${OTHER_TEST}) set (MACRO_CHECK_FUNCTION_DEFINITIONS "-D${OTHER_TEST} ${CMAKE_REQUIRED_FLAGS}") set (OTHER_TEST_ADD_LIBRARIES) if (CMAKE_REQUIRED_LIBRARIES) @@ -587,7 +587,7 @@ endif () # For other CXX specific tests, use this MACRO. macro (HDF_CXX_FUNCTION_TEST OTHER_TEST) - if ("${OTHER_TEST}" MATCHES "^${OTHER_TEST}$") + if (NOT DEFINED ${OTHER_TEST}) set (MACRO_CHECK_FUNCTION_DEFINITIONS "-D${OTHER_TEST} ${CMAKE_REQUIRED_FLAGS}") set (OTHER_TEST_ADD_LIBRARIES) if (CMAKE_REQUIRED_LIBRARIES) @@ -656,7 +656,7 @@ endif () if (WINDOWS) if (NOT HDF_NO_IOEO_TEST) message (STATUS "Checking for InitOnceExecuteOnce:") - if ("${${HDF_PREFIX}_HAVE_IOEO}" MATCHES "^${${HDF_PREFIX}_HAVE_IOEO}$") + if (NOT DEFINED ${${HDF_PREFIX}_HAVE_IOEO}) if (LARGEFILE) set (CMAKE_REQUIRED_DEFINITIONS "${CURRENT_TEST_DEFINITIONS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE" diff --git a/config/cmake_ext_mod/HDFTests.c b/config/cmake_ext_mod/HDFTests.c index 60ac744..320fd5b 100644 --- a/config/cmake_ext_mod/HDFTests.c +++ b/config/cmake_ext_mod/HDFTests.c @@ -222,12 +222,26 @@ SIMPLE_TEST(struct stat sb; sb.st_blocks=0); #include <stdlib.h> #include <string.h> +#if defined(_MSC_VER) && defined(_DEBUG) +# include <crtdbg.h> +int DebugReport(int reportType, char* message, int* returnValue) +{ + (void)reportType; + (void)message; + (void)returnValue; + return 1; /* no further handling required */ +} +#endif + int main(void) { char *llwidthArgs[] = { "I64", "l64", "l", "L", "q", "ll", NULL }; char *s = malloc(128); char **currentArg = NULL; LL_TYPE x = (LL_TYPE)1048576 * (LL_TYPE)1048576; + #if defined(_MSC_VER) && defined(_DEBUG) + _CrtSetReportHook(DebugReport); + #endif for (currentArg = llwidthArgs; *currentArg != NULL; currentArg++) { char formatString[64]; |