diff options
Diffstat (limited to 'configure.in')
| -rw-r--r-- | configure.in | 520 |
1 files changed, 295 insertions, 225 deletions
diff --git a/configure.in b/configure.in index 4422aba..53820e1 100644 --- a/configure.in +++ b/configure.in @@ -1,8 +1,16 @@ dnl Process this file with autoconf to produce configure. dnl -dnl Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 -dnl National Center for Supercomputing Applications -dnl All rights reserved. +dnl Copyright by the Board of Trustees of the University of Illinois. +dnl All rights reserved. +dnl +dnl This file is part of HDF5. The full HDF5 copyright notice, including +dnl terms governing use, modification, and redistribution, is contained in +dnl the files COPYING and Copyright.html. COPYING can be found at the root +dnl of the source code distribution tree; Copyright.html can be found at the +dnl root level of an installed copy of the electronic HDF5 document set and +dnl is linked from the top-level documents page. It can also be found at +dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. dnl ---------------------------------------------------------------------- dnl Initialize configure. @@ -37,20 +45,20 @@ AC_OUTPUT_COMMANDS([ ]) AC_CANONICAL_HOST -AC_SUBST(CPPFLAGS) +AC_SUBST([CPPFLAGS]) dnl ---------------------------------------------------------------------- dnl Dump all shell variables values. dnl -AC_MSG_CHECKING(shell variables initial values) -set >&5 -AC_MSG_RESULT(done) +AC_MSG_CHECKING([shell variables initial values]) +set >&AS_MESSAGE_LOG_FD +AC_MSG_RESULT([done]) dnl ---------------------------------------------------------------------- dnl Check that the cache file was build on the same host as what we're dnl running on now. dnl -AC_CACHE_CHECK(for cached host,hdf5_cv_host,hdf5_cv_host="none"); +AC_CACHE_CHECK([for cached host], [hdf5_cv_host], [hdf5_cv_host="none"]); if test $hdf5_cv_host = "none"; then hdf5_cv_host=$host elif test $hdf5_cv_host != $host; then @@ -105,27 +113,29 @@ case $host_os in ;; esac -AC_ARG_ENABLE(hsizet, - [ --disable-hsizet Datasets can normally be larger than memory - and/or files but some compilers are unable to - handle this (including versions of GCC before - 2.8.0). Disabling the feature causes dataset - sizes to be restricted to the size of core memory, - or 'size_t'.], - HSIZET=$enableval) +AC_ARG_ENABLE([hsizet], + [AC_HELP_STRING([--disable-hsizet], + [Datasets can normally be larger than + memory and/or files but some compilers are + unable to handle this (including versions + of GCC before 2.8.0). Disabling the + feature causes dataset sizes to be + restricted to the size of core memory, or + 'size_t'.])], + [HSIZET=$enableval]) -AC_MSG_CHECKING(for sizeof hsize_t and hssize_t) +AC_MSG_CHECKING([for sizeof hsize_t and hssize_t]) AC_SUBST(HSIZET) case $HSIZET in no|small) - AC_MSG_RESULT(small) + AC_MSG_RESULT([small]) HSIZET=small ;; *) - AC_MSG_RESULT(large) + AC_MSG_RESULT([large]) HSIZET=large - AC_DEFINE(HAVE_LARGE_HSIZET, 1, + AC_DEFINE([HAVE_LARGE_HSIZET], [1], [Define if it's safe to use \`long long' for hsize_t and hssize_t]) ;; esac @@ -142,13 +152,13 @@ for f in $host_cpu-$host_vendor-$host_os \ $host_os_novers \ $host_vendor \ $host_cpu ; do - AC_MSG_CHECKING(for config $f) + AC_MSG_CHECKING([for config $f]) if test -f "$srcdir/config/$f"; then host_config=$srcdir/config/$f - AC_MSG_RESULT(found) + AC_MSG_RESULT([found]) break fi - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) done if test $host_config != "none"; then CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`" @@ -159,13 +169,13 @@ dnl Source any special site-specific file hname="`hostname`" while test -n "$hname"; do file=$srcdir/config/site-specific/host-$hname - AC_MSG_CHECKING(for config $file) + AC_MSG_CHECKING([for config $file]) if test -f "$file"; then . $file - AC_MSG_RESULT(found) + AC_MSG_RESULT([found]) break fi - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) hname_tmp=$hname hname="`echo $hname | cut -d. -f2-99`" test "$hname_tmp" = "$hname" && break @@ -177,15 +187,16 @@ dnl AC_PROG_CC CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`" -AC_SUBST(config_dirs) config_dirs="" +AC_SUBST([config_dirs]) config_dirs="" dnl ---------------------------------------------------------------------- dnl Check if they would like the Fortran interface compiled dnl -AC_MSG_CHECKING(if fortran interface enabled) -AC_ARG_ENABLE(fortran, - [ --enable-fortran Compile the Fortran interface [default=no]], - HDF_FORTRAN=$enableval) +AC_MSG_CHECKING([if fortran interface enabled]) +AC_ARG_ENABLE([fortran], + [AC_HELP_STRING([--enable-fortran], + [Compile the Fortran interface [default=no]])], + [HDF_FORTRAN=$enableval]) if test "X$HDF_FORTRAN" = "Xyes"; then echo "yes" @@ -201,10 +212,11 @@ fi dnl ---------------------------------------------------------------------- dnl Check if they would like the C++ interface compiled dnl -AC_MSG_CHECKING(if c++ interface enabled) -AC_ARG_ENABLE(cxx, - [ --enable-cxx Compile the C++ interface [default=no]], - HDF_CXX=$enableval) +AC_MSG_CHECKING([if c++ interface enabled]) +AC_ARG_ENABLE([cxx], + [AC_HELP_STRING([--enable-cxx], + [Compile the C++ interface [default=no]])], + [HDF_CXX=$enableval]) if test "X$HDF_CXX" = "Xyes"; then echo "yes" @@ -218,15 +230,17 @@ else fi dnl Run configure in the subdirectories if specified -AC_CONFIG_SUBDIRS(${config_dirs}) +AC_CONFIG_SUBDIRS([${config_dirs}]) dnl ---------------------------------------------------------------------- dnl If we should build only static executables dnl -AC_MSG_CHECKING(if should build only statically linked executables) -AC_ARG_ENABLE(static_exec, - [ --enable-static-exec Build only statically linked executables [default=no]], - STATIC_EXEC=$enableval) +AC_MSG_CHECKING([if should build only statically linked executables]) +AC_ARG_ENABLE([static_exec], + [AC_HELP_STRING([--enable-static-exec], + [Build only statically linked executables + [default=no]])], + [STATIC_EXEC=$enableval]) if test "X$STATIC_EXEC" = "Xyes"; then echo "yes" @@ -235,25 +249,25 @@ else echo "no" LT_STATIC_EXEC="" fi -AC_SUBST(LT_STATIC_EXEC) +AC_SUBST([LT_STATIC_EXEC]) dnl ---------------------------------------------------------------------- dnl Check if they have Perl installed on their system. We only need Perl dnl if they're using a GNU compiler. dnl -AC_SUBST(PERL) PERL="" +AC_SUBST([PERL]) PERL="" if test "X$GCC" = "Xyes"; then - AC_CHECK_PROGS(PERL, perl,, $PATH) + AC_CHECK_PROGS([PERL], [perl],, [$PATH]) fi dnl ---------------------------------------------------------------------- dnl Check which archiving tool to use. This needs to be done before -dnl the AM_PROG_LIBTOOL macro. +dnl the AC_PROG_LIBTOOL macro. dnl if test -z "$AR"; then - AC_CHECK_PROGS(AR,ar xar,:,$PATH) + AC_CHECK_PROGS([AR], [ar xar], [:], [$PATH]) fi -AC_SUBST(AR) +AC_SUBST([AR]) dnl Export the AR macro so that it will be placed in the libtool file dnl correctly. @@ -262,7 +276,7 @@ export AR AC_PROG_MAKE_SET AC_PROG_INSTALL AC_LIBTOOL_DLOPEN -AM_PROG_LIBTOOL +AC_PROG_LIBTOOL dnl Fix up the INSTALL macro if it's a relative path. We want the dnl full-path to the binary instead. @@ -272,11 +286,12 @@ case "$INSTALL" in ;; esac -AC_MSG_CHECKING(make) -AC_SUBST_FILE(DEPEND) +AC_MSG_CHECKING([make]) +AC_SUBST_FILE([DEPEND]) + if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ sed -n 1p|cut -c1-8`" = "GNU Make"; then - AC_MSG_RESULT(GNU make) + AC_MSG_RESULT([GNU make]) GMAKE=yes if test "X$GCC" = "Xyes"; then DEPEND=config/depend1 @@ -284,12 +299,12 @@ if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ DEPEND=config/depend2 fi else - AC_MSG_RESULT(generic) + AC_MSG_RESULT([generic]) fi dnl How do we include another file into a Makefile? if test -z "$DEPEND"; then - AC_MSG_CHECKING(how to include a makefile) + AC_MSG_CHECKING([how to include a makefile]) dnl The include file contains the target for `foo' cat >makeinc <<EOF @@ -310,16 +325,17 @@ EOF dnl Most make's use `include FILE' echo 'include makeinc' >maketest if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - AC_MSG_RESULT(include FILE) + AC_MSG_RESULT([include FILE]) DEPEND=config/depend4 break; fi dnl default - AC_MSG_RESULT(you have a deficient make command) + AC_MSG_RESULT([you have a deficient make command]) DEPEND=config/dependN break done + rm makeinc maketest fi @@ -328,7 +344,7 @@ dnl Sometimes makes think the `.PATH:' appearing before the first rule dnl with an action should override the `all' default target. So we have dnl to decide what the proper syntax is. dnl -AC_MSG_CHECKING(how make searches directories) +AC_MSG_CHECKING([how make searches directories]) while true; do #for break # The most common method is `VPATH=DIR1 DIR2 ...' cat >maketest <<EOF @@ -390,7 +406,7 @@ EOF SEARCH_SEP=' ' AC_MSG_RESULT([it doesn't]) if test ! -f configure; then - AC_MSG_ERROR(${MAKE-make} requires the build and source directories to be the same) + AC_MSG_ERROR([${MAKE-make} requires the build and source directories to be the same]) fi break done @@ -402,33 +418,34 @@ dnl the record. dnl AC_MSG_CHECKING(for production mode) AC_ARG_ENABLE(production, - [ --enable-production Determines how to run the compiler.]) + [AC_HELP_STRING([--enable-production], + [Determines how to run the compiler.])]) case "X-$enable_production" in X-yes) enable_production="yes" - AC_MSG_RESULT("production") + AC_MSG_RESULT([production]) CONFIG_MODE=production CFLAGS="$CFLAGS $PROD_CFLAGS" CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" ;; X-|X-no) enable_production="no" - AC_MSG_RESULT("development") + AC_MSG_RESULT([development]) CONFIG_MODE=development CFLAGS="$CFLAGS $DEBUG_CFLAGS" CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" ;; X-pg|X-profile) enable_production="profile" - AC_MSG_RESULT("profile") + AC_MSG_RESULT([profile]) CONFIG_MODE=profile CFLAGS="$CFLAGS $PROFILE_CFLAGS" CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" ;; *) enable_production="user-defined" - AC_MSG_RESULT("user-defined") + AC_MSG_RESULT([user-defined]) CONFIG_MODE="$X-enableval" ;; esac @@ -436,27 +453,29 @@ esac dnl ---------------------------------------------------------------------- dnl Check for system libraries. dnl -AC_CHECK_LIB(m,ceil) +AC_CHECK_LIB([m], [ceil]) if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then dnl ...for Solaris - AC_CHECK_LIB(nsl, xdr_int) + AC_CHECK_LIB([nsl], [xdr_int]) fi -dnl AC_CHECK_LIB(coug,main) dnl ...for ASCI/Red +dnl AC_CHECK_LIB([coug], [main]) dnl ...for ASCI/Red dnl ---------------------------------------------------------------------- dnl Check for system header files. dnl AC_HEADER_STDC AC_HEADER_TIME + dnl Unix -AC_CHECK_HEADERS(sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h) -AC_CHECK_HEADERS(sys/socket.h sys/types.h) -AC_CHECK_HEADERS(stddef.h setjmp.h features.h) -AC_CHECK_HEADERS(stdint.h, C9x=yes) +AC_CHECK_HEADERS([sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h]) +AC_CHECK_HEADERS([sys/socket.h sys/types.h]) +AC_CHECK_HEADERS([stddef.h setjmp.h features.h]) +AC_CHECK_HEADERS([stdint.h], [C9x=yes]) + dnl Windows -AC_CHECK_HEADERS(io.h winsock.h sys/timeb.h) +AC_CHECK_HEADERS([io.h winsock.h sys/timeb.h]) case "$host" in alpha*-dec*-osf*) @@ -464,43 +483,47 @@ case "$host" in dnl Alpha to turn off UAC fixing. We do *not* attempt to dnl locate these files on other systems because there are too dnl many problems with including them. - AC_CHECK_HEADERS(sys/sysinfo.h sys/proc.h) + AC_CHECK_HEADERS([sys/sysinfo.h sys/proc.h]) ;; esac +dnl ---------------------------------------------------------------------- +dnl Test for 64bit stuff before the data types and their sizes. The +dnl result could effect the outcome of the sizeof macros below. +dnl case "$host_cpu-$host_vendor-$host_os" in *linux*) dnl ---------------------------------------------------------------------- dnl Enable large file support on linux? Store the result in the LINUX_LFS dnl variable for posterity - AC_ARG_ENABLE(linux-lfs, - [ --enable-linux-lfs Enable support for large (64-bit) files on Linux. - [default=check]]) + AC_ARG_ENABLE([linux-lfs], + [AC_HELP_STRING([--enable-linux-lfs], + [Enable support for large (64-bit) + files on Linux. [default=check]])]) + LINUX_LFS="no" case "X-$enable_linux_lfs" in X-yes) LINUX_LFS=yes ;; X-no) - LINUX_LFS=no ;; X-|*) - LINUX_LFS=no - AC_CHECK_FUNCS(getdents64, - dnl Add the large file support flags to the CPPFLAGS macro if - dnl we're on a Linux system which austensibly supports LFS. (We - dnl think it does if it has the `getdents64' syscall). - LINUX_LFS=yes) + MAJOR_VER="`uname -r | cut -d '.' -f1`" + MINOR_VER="`uname -r | cut -d '.' -f2`" + + if test $MAJOR_VER -ge 2 -a $MINOR_VER -ge 4; then + LINUX_LFS="yes" + fi ;; esac - AC_MSG_CHECKING(for large file support on linux mode) + AC_MSG_CHECKING([for large file support mode on Linux]) if test "X$LINUX_LFS" = "Xyes"; then - AC_MSG_RESULT(enabled) - + AC_MSG_RESULT([enabled]) CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS" else - AC_MSG_RESULT(disabled) + AC_MSG_RESULT([disabled]) fi dnl Add POSIX support on Linux systems, so <features.h> defines @@ -517,26 +540,26 @@ case "$host_cpu-$host_vendor-$host_os" in esac AC_TRY_COMPILE([#include <sys/types.h>], - [off64_t n = 0;], - AC_CHECK_FUNCS(lseek64 fseek64), - AC_MSG_RESULT([skipping test for lseek64() and fseek64()])) + [off64_t n = 0;], + [AC_CHECK_FUNCS([lseek64 fseek64])], + [AC_MSG_RESULT([skipping test for lseek64() and fseek64()])]) dnl ---------------------------------------------------------------------- dnl Data types and their sizes. dnl AC_TYPE_OFF_T -AC_CHECK_TYPE(size_t, unsigned long) -AC_CHECK_TYPE(ssize_t, long) +AC_CHECK_TYPE([size_t], [unsigned long]) +AC_CHECK_TYPE([ssize_t], [long]) AC_C_BIGENDIAN -AC_CHECK_SIZEOF(char, 1) -AC_CHECK_SIZEOF(short, 2) -AC_CHECK_SIZEOF(int, 4) -AC_CHECK_SIZEOF(long, 4) -AC_CHECK_SIZEOF(long long, 8) -AC_CHECK_SIZEOF(__int64, 8) -AC_CHECK_SIZEOF(float, 4) -AC_CHECK_SIZEOF(double, 8) -AC_CHECK_SIZEOF(long double, 8) +AC_CHECK_SIZEOF([char], [1]) +AC_CHECK_SIZEOF([short], [2]) +AC_CHECK_SIZEOF([int], [4]) +AC_CHECK_SIZEOF([long], [4]) +AC_CHECK_SIZEOF([long long], [8]) +AC_CHECK_SIZEOF([__int64], [8]) +AC_CHECK_SIZEOF([float], [4]) +AC_CHECK_SIZEOF([double], [8]) +AC_CHECK_SIZEOF([long double], [8]) dnl Checkpoint the cache AC_CACHE_SAVE @@ -552,40 +575,41 @@ if test "X$C9x" = "Xyes"; then EOF fi -AC_CHECK_SIZEOF( int8_t, 1) -AC_CHECK_SIZEOF( uint8_t, 1) -AC_CHECK_SIZEOF( int_least8_t, 1) -AC_CHECK_SIZEOF( uint_least8_t, 1) -AC_CHECK_SIZEOF( int_fast8_t, 1) -AC_CHECK_SIZEOF( uint_fast8_t, 1) - -AC_CHECK_SIZEOF( int16_t, 2) -AC_CHECK_SIZEOF( uint16_t, 2) -AC_CHECK_SIZEOF( int_least16_t, 2) -AC_CHECK_SIZEOF(uint_least16_t, 2) -AC_CHECK_SIZEOF( int_fast16_t, 2) -AC_CHECK_SIZEOF( uint_fast16_t, 2) - -AC_CHECK_SIZEOF( int32_t, 4) -AC_CHECK_SIZEOF( uint32_t, 4) -AC_CHECK_SIZEOF( int_least32_t, 4) -AC_CHECK_SIZEOF(uint_least32_t, 4) -AC_CHECK_SIZEOF( int_fast32_t, 4) -AC_CHECK_SIZEOF( uint_fast32_t, 4) - -AC_CHECK_SIZEOF( int64_t, 8) -AC_CHECK_SIZEOF( uint64_t, 8) -AC_CHECK_SIZEOF( int_least64_t, 8) -AC_CHECK_SIZEOF(uint_least64_t, 8) -AC_CHECK_SIZEOF( int_fast64_t, 8) -AC_CHECK_SIZEOF( uint_fast64_t, 8) - -AC_CHECK_SIZEOF(size_t, 4) -AC_CHECK_SIZEOF(ssize_t, 4) +AC_CHECK_SIZEOF( int8_t, [1]) +AC_CHECK_SIZEOF( uint8_t, [1]) +AC_CHECK_SIZEOF( int_least8_t, [1]) +AC_CHECK_SIZEOF( uint_least8_t, [1]) +AC_CHECK_SIZEOF( int_fast8_t, [1]) +AC_CHECK_SIZEOF( uint_fast8_t, [1]) + +AC_CHECK_SIZEOF( int16_t, [2]) +AC_CHECK_SIZEOF( uint16_t, [2]) +AC_CHECK_SIZEOF( int_least16_t, [2]) +AC_CHECK_SIZEOF(uint_least16_t, [2]) +AC_CHECK_SIZEOF( int_fast16_t, [2]) +AC_CHECK_SIZEOF( uint_fast16_t, [2]) + +AC_CHECK_SIZEOF( int32_t, [4]) +AC_CHECK_SIZEOF( uint32_t, [4]) +AC_CHECK_SIZEOF( int_least32_t, [4]) +AC_CHECK_SIZEOF(uint_least32_t, [4]) +AC_CHECK_SIZEOF( int_fast32_t, [4]) +AC_CHECK_SIZEOF( uint_fast32_t, [4]) + +AC_CHECK_SIZEOF( int64_t, [8]) +AC_CHECK_SIZEOF( uint64_t, [8]) +AC_CHECK_SIZEOF( int_least64_t, [8]) +AC_CHECK_SIZEOF(uint_least64_t, [8]) +AC_CHECK_SIZEOF( int_fast64_t, [8]) +AC_CHECK_SIZEOF( uint_fast64_t, [8]) + +AC_CHECK_SIZEOF([size_t], [4]) +AC_CHECK_SIZEOF([ssize_t], [4]) + cat >>confdefs.h <<\EOF #include <sys/types.h> /*for off_t definition*/ EOF -AC_CHECK_SIZEOF(off_t, 4) +AC_CHECK_SIZEOF([off_t], [4]) dnl Checkpoint the cache AC_CACHE_SAVE @@ -600,7 +624,7 @@ AC_TRY_COMPILE([ #endif ], [dev_t d1, d2; if(d1==d2) return 0;], - AC_DEFINE(DEV_T_IS_SCALAR, 1, + AC_DEFINE([DEV_T_IS_SCALAR], [1], [Define if \`dev_t' is a scalar]) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) @@ -611,7 +635,7 @@ dnl Fake --with-xxx option to allow us to create a help message for the dnl following --with-xxx options which can take either a =DIR or =INC,LIB dnl specifier. dnl -AC_ARG_WITH(fnord, +AC_ARG_WITH([fnord], [ For the following --with-xxx options, you can specify where the header files and libraries are in two different ways: @@ -620,7 +644,7 @@ AC_ARG_WITH(fnord, library directory separated by a comma --with-xxx=DIR - Specify only the directory which contains the include/ and lib/ subdirectories - ],,) + ]) dnl ---------------------------------------------------------------------- dnl Is the dmalloc present? It has a header file `dmalloc.h' and a library @@ -628,9 +652,10 @@ dnl `-ldmalloc' and their locations might be specified with the `--with-dmalloc' dnl command-line switch. The value is an include path and/or a library path. dnl If the library path is specified then it must be preceded by a comma. dnl -AC_ARG_WITH(dmalloc, - [ --with-dmalloc[=DIR] Use dmalloc memory debugging aid (default=no)],, - withval=no) +AC_ARG_WITH([dmalloc], + [AC_HELP_STRING([--with-dmalloc=DIR], + [Use dmalloc memory debugging aid [default=no]])],, + withval=no) case $withval in yes) @@ -689,24 +714,26 @@ dnl `-lz' and their locations might be specified with the `--with-zlib' dnl command-line switch. The value is an include path and/or a library path. dnl If the library path is specified then it must be preceded by a comma. dnl -AC_ARG_WITH(zlib, - [ --with-zlib[=DIR] Use GNU zlib compression [default=yes]],, - withval=yes) +AC_ARG_WITH([zlib], + [AC_HELP_STRING([--with-zlib=DIR], + [Use GNU zlib compression [default=yes]])],, + withval=yes) case $withval in yes) HAVE_ZLIB="yes" - AC_CHECK_HEADERS(zlib.h) - AC_CHECK_LIB(z, compress2,, unset HAVE_ZLIB) + AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"]) + AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB]) + AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR(couldn't find zlib library) + AC_MSG_ERROR([couldn't find zlib library]) fi ;; no) HAVE_ZLIB="no" - AC_MSG_CHECKING(for GNU zlib) - AC_MSG_RESULT(suppressed) + AC_MSG_CHECKING([for GNU zlib]) + AC_MSG_RESULT([suppressed]) ;; *) HAVE_ZLIB="yes" @@ -730,30 +757,40 @@ case $withval in CPPFLAGS="$CPPFLAGS -I$zlib_inc" fi - AC_CHECK_HEADERS(zlib.h,, CPPFLAGS="$saved_CPPFLAGS") + AC_CHECK_HEADERS([zlib.h], + [HAVE_ZLIB_H="yes"], + [CPPFLAGS="$saved_CPPFLAGS"]) if test -n "$zlib_lib"; then LDFLAGS="$LDFLAGS -L$zlib_lib" fi - AC_CHECK_LIB(z, compress2,, LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB) + AC_CHECK_LIB([z], [compress2],, + [LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB]) + AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR(couldn't find zlib library) + AC_MSG_ERROR([couldn't find zlib library]) fi ;; esac +if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then + AC_DEFINE(HAVE_COMPRESSION, 1, + [Define if we have zlib compression support]) +fi + dnl ---------------------------------------------------------------------- dnl Pablo Configuration dnl AC_SUBST(PABLO) PABLO="" AC_SUBST(HAVE_PABLO) HAVE_PABLO="no" -AC_ARG_WITH(pablo, - [ --with-pablo[=DIR] Use the Pablo library [default=no]],, - withval=no) +AC_ARG_WITH([pablo], + [AC_HELP_STRING([--with-pablo=DIR], + [Use the Pablo library [default=no]])],, + withval=no) -AC_MSG_CHECKING(for Pablo) +AC_MSG_CHECKING([for Pablo]) case "$withval" in yes) @@ -821,9 +858,10 @@ esac dnl Is SSL library present? It is needed by GLOBUS-GASS and Grid Storage dnl driver. SSL must be tested before them. AC_SUBST(SSL) SSL=yes -AC_ARG_WITH(ssl, - [ --with-ssl[=LIB] Use the SSL library [default=no]],, - withval=no) +AC_ARG_WITH([ssl], + [AC_HELP_STRING([--with-ssl=LIB], + [Use the SSL library [default=no]])],, + withval=no) case "$withval" in yes) @@ -849,9 +887,10 @@ dnl the Grid Storage driver. dnl AC_SUBST(GASS) GASS="yes" AC_SUBST(TESTGASS) TESTGASS='$(srcdir)/testgass' -AC_ARG_WITH(gass, - [ --with-gass[=DIR] Use the GASS library [default=no]],, - withval=no) +AC_ARG_WITH([gass], + [AC_HELP_STRING([--with-gass=DIR], + [Use the GASS library [default=no]])],, + withval=no) case "$withval" in yes) @@ -924,7 +963,7 @@ case "$withval" in esac if test -n "$GASS"; then - AC_DEFINE(HAVE_GASS, 1, + AC_DEFINE([HAVE_GASS], [1], [Define if the Globus GASS is defined]) fi @@ -933,9 +972,10 @@ dnl Are SRB Client and other system libraries(socket, elf) present? dnl AC_SUBST(SRB) SRB="yes" AC_SUBST(TESTSRB) TESTSRB='$(srcdir)/testsrb' -AC_ARG_WITH(srb, - [ --with-srb[=DIR] Use the SRB library [default=no]],, - withval=no) +AC_ARG_WITH([srb], + [AC_HELP_STRING([--with-srb=DIR], + [Use the SRB library [default=no]])],, + withval=no) case "$withval" in yes) @@ -1013,9 +1053,10 @@ dnl be preceded by a comma. dnl AC_SUBST(PTHREAD) PTHREAD=yes -AC_ARG_WITH(pthread, - [ --with-pthread[=DIR] Use the Pthreads library [default=no]],, - withval=no) +AC_ARG_WITH([pthread], + [AC_HELP_STRING([--with-pthread=DIR], + [Use the Pthreads library [default=no]])],, + withval=no) case "$withval" in yes) @@ -1064,9 +1105,10 @@ dnl ---------------------------------------------------------------------- dnl Enable thread-safe version of library. It requires Pthreads support. dnl AC_MSG_CHECKING(for thread safe support) -AC_ARG_ENABLE(threadsafe, - [ --enable-threadsafe Enable thread safe capability], - THREADSAFE=$enableval) +AC_ARG_ENABLE([threadsafe], + [AC_HELP_STRING([--enable-threadsafe], + [Enable thread safe capability])], + THREADSAFE=$enableval) case "X-$THREADSAFE" in X-|X-no) @@ -1075,8 +1117,8 @@ case "X-$THREADSAFE" in X-yes) dnl Check that we can link a simple Pthread program. AC_TRY_LINK(,pthread_create(), - AC_MSG_RESULT(yes); THREADSAFE=yes, - AC_MSG_ERROR(needed pthread library not available)) + AC_MSG_RESULT(yes); THREADSAFE=yes, + AC_MSG_ERROR(needed pthread library not available)) ;; *) AC_MSG_RESULT(error) @@ -1085,7 +1127,7 @@ case "X-$THREADSAFE" in esac if test "X$THREADSAFE" = "Xyes"; then - AC_DEFINE(HAVE_THREADSAFE, 1, + AC_DEFINE([HAVE_THREADSAFE], [1], [Define if we have thread safe support]) fi @@ -1093,32 +1135,35 @@ dnl ---------------------------------------------------------------------- dnl Check if they would like the HDF5 v1.4 compatibility functions dnl compiled in dnl -AC_MSG_CHECKING(whether HDF5 v1.4 compatibility functions enabled) -AC_ARG_ENABLE(hdf5v1_4, - [ --enable-hdf5v1_4 Compile the HDF5 v1.4 compatibility interface - [default=no]], - HDF5_V1_4_COMPAT=$enableval) +AC_MSG_CHECKING([whether HDF5 v1.4 compatibility functions enabled]) +AC_ARG_ENABLE([hdf5v1_4], + [AC_HELP_STRING([--enable-hdf5v1_4], + [Compile the HDF5 v1.4 compatibility + interface [default=no]])], + [HDF5_V1_4_COMPAT=$enableval]) if test "$HDF5_V1_4_COMPAT" = "yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE(WANT_H5_V1_4_COMPAT, 1, + AC_MSG_RESULT([yes]) + AC_DEFINE([WANT_H5_V1_4_COMPAT], [1], [Define if the HDF5 v1.4 compatibility functions are to be compiled in]) else - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) fi dnl ---------------------------------------------------------------------- dnl Should the Stream Virtual File Driver be compiled in ? dnl -AC_MSG_CHECKING(for Stream Virtual File Driver support) -AC_ARG_ENABLE(stream-vfd, - [ --enable-stream-vfd Build the Stream Virtual File Driver [default=no]], - STREAM_VFD=$enableval) +AC_MSG_CHECKING([for Stream Virtual File Driver support]) +AC_ARG_ENABLE([stream-vfd], + [AC_HELP_STRING([--enable-stream-vfd], + [Build the Stream Virtual File Driver + [default=no]])], + [STREAM_VFD=$enableval]) if test "$STREAM_VFD" = "yes"; then - AC_MSG_RESULT(yes) - AC_CHECK_HEADERS(netinet/tcp.h sys/filio.h) - AC_DEFINE(HAVE_STREAM, 1, + AC_MSG_RESULT([yes]) + AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h]) + AC_DEFINE([HAVE_STREAM], [1], [Define if the stream virtual file driver should be compiled]) dnl Check if 'socklen_t' available @@ -1137,13 +1182,13 @@ if test "$STREAM_VFD" = "yes"; then #endif ], [socklen_t foo; return 0;], - AC_DEFINE(HAVE_SOCKLEN_T, 1, + AC_DEFINE([HAVE_SOCKLEN_T], 1, [Define if \`socklen_t' is defined]) - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) + AC_MSG_RESULT([yes]), + AC_MSG_RESULT([no]) ) else - AC_MSG_RESULT(not configured) + AC_MSG_RESULT([not configured]) fi dnl ---------------------------------------------------------------------- @@ -1242,7 +1287,7 @@ AC_MSG_RESULT(no)) dnl ---------------------------------------------------------------------- dnl Check for functions. dnl -AC_CHECK_FUNCS(compress2 difftime fork gethostname getpwuid getrusage) +AC_CHECK_FUNCS(difftime fork gethostname getpwuid getrusage) AC_CHECK_FUNCS(gettimeofday BSDgettimeofday longjmp setsysinfo sigaction) AC_CHECK_FUNCS(signal snprintf vsnprintf strdup system waitpid) @@ -1252,14 +1297,14 @@ dnl AC_C_CONST AC_C_INLINE -AC_MSG_CHECKING(for __attribute__ extension) +AC_MSG_CHECKING([for __attribute__ extension]) AC_TRY_COMPILE(,[int __attribute__((unused)) x], AC_DEFINE(HAVE_ATTRIBUTE, 1, [Define if the __attribute__(()) extension is present]) AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) -AC_MSG_CHECKING(for __FUNCTION__ extension) +AC_MSG_CHECKING([for __FUNCTION__ extension]) AC_TRY_COMPILE(,[(void)__FUNCTION__], AC_DEFINE(HAVE_FUNCTION, 1, [Define if the compiler understand the __FUNCTION__ keyword]) @@ -1275,7 +1320,7 @@ dnl the dynamic library. The correct way to do it should be updating dnl LD_LIBRARY_PATH along with LDFLAGS or do it with the AC_TRY_RUN macro. dnl AC_MSG_CHECKING(how to print long long) -AC_CACHE_VAL(hdf5_cv_printf_ll, +AC_CACHE_VAL([hdf5_cv_printf_ll], LD_LIBRARY_PATH="$LD_LIBRARY_PATH`echo $LDFLAGS | sed -e 's/-L/:/g' -e 's/ //g'`" export LD_LIBRARY_PATH @@ -1293,7 +1338,7 @@ int main(void) exit(strcmp(s,"1099511627776")); } ], break,,continue) -done) +done)dnl AC_MSG_RESULT(%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u) AC_DEFINE_UNQUOTED(PRINTF_LL_WIDTH, "$hdf5_cv_printf_ll", @@ -1302,7 +1347,7 @@ AC_DEFINE_UNQUOTED(PRINTF_LL_WIDTH, "$hdf5_cv_printf_ll", dnl ---------------------------------------------------------------------- dnl Check if malloc(0) returns valid pointer dnl -AC_MSG_CHECKING(if malloc of zero bytes returns valid pointer) +AC_MSG_CHECKING([if malloc of zero bytes returns valid pointer]) AC_CACHE_VAL(hdf5_cv_malloc_works, AC_TRY_RUN([ #if STDC_HEADERS @@ -1322,19 +1367,36 @@ if test ${hdf5_cv_malloc_works} = "yes"; then else AC_MSG_RESULT(no) fi - + +dnl ---------------------------------------------------------------------- +dnl Checking to see if GPFS is available on this filesystem +dnl +AC_CHECK_HEADERS([gpfs.h], + AC_MSG_CHECKING([for GPFS support]) + AC_TRY_COMPILE([#include <gpfs.h>], + [int fd = 0; gpfs_fcntl(fd, (void *)0);], + AC_DEFINE(HAVE_GPFS, 1, + [Define if we have GPFS support]) + AC_MSG_RESULT(yes) + LIBS="$LIBS -lgpfs" + GPFS="yes", + AC_MSG_RESULT(no) + GPFS="no")) + dnl ---------------------------------------------------------------------- dnl Turn on debugging by setting compiler flags dnl AC_MSG_CHECKING(for debug flags) -AC_ARG_ENABLE(debug, - [ --enable-debug[=all] Turn on debugging in all packages. One may also - specify a comma-separated list of package names - without the leading H5 or the word no. The default - is most packages.], - DEBUG_PKG=$enableval) - -AC_SUBST(DEBUG_PKG) +AC_ARG_ENABLE([debug], + [AC_HELP_STRING([--enable-debug=all], + [Turn on debugging in all packages. One may + also specify a comma-separated list of + package names without the leading H5 or + the word no. The default is most + packages.])], + [DEBUG_PKG=$enableval]) + +AC_SUBST([DEBUG_PKG]) all_packages="ac,b,d,e,f,g,hg,hl,i,mf,mm,o,p,s,t,v,z" case "X-$DEBUG_PKG" in X-|X-yes) @@ -1366,18 +1428,20 @@ fi dnl ---------------------------------------------------------------------- dnl Enable tracing of the API dnl -AC_MSG_CHECKING(for API tracing); -AC_ARG_ENABLE(trace, - [ --disable-trace Disable API tracing capability], - TRACE=$enableval) +AC_MSG_CHECKING([for API tracing]) +AC_ARG_ENABLE([trace], + [AC_HELP_STRING([--disable-trace], + [Disable API tracing capability])], + [TRACE=$enableval]) + +AC_SUBST([TRACE_API]) -AC_SUBST(TRACE_API) if test -z "$TRACE" -o "X$TRACE" = "Xyes"; then - AC_MSG_RESULT(yes) + AC_MSG_RESULT([yes]) TRACE_API=yes CPPFLAGS="$CPPFLAGS -DH5_DEBUG_API" else - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) TRACE_API=no CPPFLAGS="$CPPFLAGS -UH5_DEBUG_API" fi @@ -1439,7 +1503,7 @@ case "$CC_BASENAME" in dnl The mpich compiler. Use mpirun from the same directory if it dnl exists. PARALLEL=mpicc - AC_MSG_CHECKING(for mpirun) + AC_MSG_CHECKING([for mpirun]) dnl Find the path where mpicc is located. cmd="`echo $CC | cut -f1 -d' '`" @@ -1455,14 +1519,14 @@ case "$CC_BASENAME" in dnl Is there an mpirun at that path? if test -x $path/mpirun; then - AC_MSG_RESULT($path/mpirun) + AC_MSG_RESULT([$path/mpirun]) RUNSERIAL="${RUNSERIAL:-none}" if test -z "$RUNPARALLEL"; then RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=3}" fi else - AC_MSG_RESULT(none) + AC_MSG_RESULT([none]) fi ;; @@ -1470,7 +1534,7 @@ case "$CC_BASENAME" in dnl The LAM compiler. Use mpirun_lam or mpirun from the same directory dnl if it exists. PARALLEL=hcc - AC_MSG_CHECKING(for mpirun_lam or mpirun) + AC_MSG_CHECKING([for mpirun_lam or mpirun]) dnl Find the path where hcc is located cmd="`echo $CC | cut -f1 -d' '`" @@ -1491,13 +1555,13 @@ case "$CC_BASENAME" in else cmd=mpirun fi - AC_MSG_RESULT($path/$cmd); + AC_MSG_RESULT([$path/$cmd]) RUNSERIAL="${RUNSERIAL:-none}" if test -z "$RUNPARALLEL"; then RUNPARALLEL="$path/$cmd -np \$\${NPROCS:=3}" fi else - AC_MSG_RESULT(none) + AC_MSG_RESULT([none]) fi ;; @@ -1520,10 +1584,11 @@ dnl `--disable-parallel' but specifies a known parallel compiler (like mpicc dnl or mpcc) then parallel support is enabled but configure doesn't search dnl for any parallel header files or libraries. dnl -AC_ARG_ENABLE(parallel, - [ --enable-parallel=TYPE Search for MPI-IO and MPI support files]) +AC_ARG_ENABLE([parallel], + [AC_HELP_STRING([--enable-parallel=TYPE], + [Search for MPI-IO and MPI support files])]) -AC_MSG_CHECKING(for parallel support files) +AC_MSG_CHECKING([for parallel support files]) case "X-$enable_parallel" in X-|X-no|X-none) dnl Either we are not compiling for parallel or the header and @@ -1929,8 +1994,8 @@ IF_YES_NO() { else while test $# -gt 0; do if test "$1" != "yes"; then - PRINT "No" - return + PRINT "No" + return fi shift done @@ -1983,7 +2048,7 @@ else PRINT "No" fi -PRINT "Features:" +PRINT "Languages:" PRINT_N " C++" IF_YES_NO "$HDF_CXX" @@ -1991,9 +2056,17 @@ IF_YES_NO "$HDF_CXX" PRINT_N " Fortran" IF_YES_NO "$HDF_FORTRAN" +PRINT "Features:" + +PRINT_N " dmalloc" +IF_YES_NO "$HAVE_DMALLOC" + PRINT_N " GASS" IF_YES_NO "$GASS" +PRINT_N " GPFS" +IF_YES_NO "$GPFS" + PRINT_N " HDF5 v1.4 Compatibility" IF_YES_NO "$HDF5_V1_4_COMPAT" @@ -2027,6 +2100,3 @@ IF_ENABLED_DISABLED "$THREADSAFE" PRINT_N " Zlib-compression" IF_YES_NO "$HAVE_ZLIB" - -PRINT_N " dmalloc" -IF_YES_NO "$HAVE_DMALLOC" |