summaryrefslogtreecommitdiffstats
path: root/configure
diff options
context:
space:
mode:
Diffstat (limited to 'configure')
-rwxr-xr-xconfigure15405
1 files changed, 7569 insertions, 7836 deletions
diff --git a/configure b/configure
index f2f0a90..4ca3a7f 100755
--- a/configure
+++ b/configure
@@ -1,5 +1,5 @@
#! /bin/sh
-# From configure.in Id: configure.in 14849 2008-04-20 11:32:00Z hdftest .
+# From configure.in Id: configure.in 14903 2008-04-30 19:51:13Z brtnfld .
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61 for HDF5 1.9.5.
#
@@ -556,22 +556,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$ECHO in
+case X$lt_ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
;;
esac
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
:
else
# Restart under the correct shell.
@@ -581,9 +581,9 @@ fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
- cat <<EOF
+ cat <<_LT_EOF
$*
-EOF
+_LT_EOF
exit 0
fi
@@ -591,121 +591,116 @@ fi
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
else
- # maybe with a smaller string...
- prev=:
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
fi
fi
fi
fi
-fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
exec 7<&0 </dev/null 6>&1
# Name of the host.
@@ -900,16 +895,21 @@ FORTRAN_SHARED_CONDITIONAL_TRUE
FORTRAN_SHARED_CONDITIONAL_FALSE
CXX_SHARED_CONDITIONAL_TRUE
CXX_SHARED_CONDITIONAL_FALSE
+LIBTOOL
+SED
GREP
EGREP
+FGREP
+LD
+DUMPBIN
+ac_ct_DUMPBIN
+NM
LN_S
-ECHO
RANLIB
+lt_ECHO
+DSYMUTIL
+NMEDIT
CPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
AM_MAKEFLAGS
USE_FILTER_DEFLATE
USE_FILTER_SZIP
@@ -935,7 +935,6 @@ CONFIG_DATE
CONFIG_USER
CONFIG_MODE
BYTESEX
-STATIC_SHARED
CC_VERSION
ROOT
DYNAMIC_DIRS
@@ -957,7 +956,8 @@ BUILD_HDF5_HL_CONDITIONAL_FALSE
SEARCH
SETX
LIBOBJS
-LTLIBOBJS'
+LTLIBOBJS
+STATIC_SHARED'
ac_subst_files=''
ac_precious_vars='build_alias
host_alias
@@ -973,9 +973,7 @@ CXX
CXXFLAGS
CCC
CXXCPP
-CPP
-F77
-FFLAGS'
+CPP'
# Initialize some variables set by options.
@@ -1624,10 +1622,9 @@ Optional Features:
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
- --with-tags[=TAGS] include additional configurations [automatic]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
For the following --with-xxx options, you can specify where the header
files and libraries are in two different ways:
@@ -1664,8 +1661,6 @@ Some influential environment variables:
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
CPP C preprocessor
- F77 Fortran 77 compiler command
- FFLAGS Fortran 77 compiler flags
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -7213,136 +7208,131 @@ case "`uname`" in
;;
esac
+enable_dlopen=yes
+
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.2'
+macro_revision='1.2627'
+
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
+if test "${ac_cv_path_SED+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" | sed 99q >conftest.sed
+ $as_unset ac_script || ac_script=
+ # Extract the first word of "sed gsed" to use in msg output
+if test -z "$SED"; then
+set dummy sed gsed; ac_prog_name=$2
+if test "${ac_cv_path_SED+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+ ac_path_SED_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+ # Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_SED_found && break 3
done
done
+done
+IFS=$as_save_IFS
+
+
+fi
+
+SED="$ac_cv_path_SED"
+if test -z "$SED"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_SED=$SED
fi
-SED=$lt_cv_path_SED
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+echo "${ECHO_T}$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
@@ -7506,6 +7496,108 @@ echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
+{ echo "$as_me:$LINENO: checking for fgrep" >&5
+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ # Extract the first word of "fgrep" to use in msg output
+if test -z "$FGREP"; then
+set dummy fgrep; ac_prog_name=$2
+if test "${ac_cv_path_FGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_FGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+ # Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_FGREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+FGREP="$ac_cv_path_FGREP"
+if test -z "$FGREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
@@ -7531,9 +7623,9 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -7613,33 +7705,15 @@ echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
+
+
+
+
+
+
+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7684,12 +7758,153 @@ else
done
IFS="$lt_save_ifs"
done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ : ${lt_cv_path_NM=no}
fi
fi
{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+echo "${ECHO_T}$DUMPBIN" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:7893: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:7896: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:7899: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
@@ -7702,8 +7917,233 @@ else
echo "${ECHO_T}no, using $LN_S" >&6; }
fi
-{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
+# find the maximum length of command line arguments
+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6; }
+
+
+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
if test "${lt_cv_deplibs_check_method+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7722,7 +8162,7 @@ lt_cv_deplibs_check_method='unknown'
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
-aix4* | aix5*)
+aix[4-9]*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -7744,17 +8184,23 @@ cygwin*)
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump'.
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | kfreebsd*-gnu | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
@@ -7791,7 +8237,7 @@ hpux10.20* | hpux11*)
esac
;;
-interix3*)
+interix[3-9]*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
;;
@@ -7807,12 +8253,12 @@ irix5* | irix6* | nonstopux*)
;;
# This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
@@ -7825,12 +8271,12 @@ newos6*)
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
;;
openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -7841,10 +8287,18 @@ osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
@@ -7872,7 +8326,7 @@ sysv4 | sysv4.3*)
esac
;;
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
lt_cv_deplibs_check_method=pass_all
;;
esac
@@ -7887,6 +8341,379 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
@@ -7896,6 +8723,256 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6; }
+else
+ { echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval=$enable_libtool_lock;
@@ -7915,54 +8992,55 @@ ia64-*-hpux*)
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 7930 "configure"' > conftest.$ac_ext
+ echo '#line 9007 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
fi
rm -rf conftest*
;;
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
@@ -7971,38 +9049,44 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
esac
fi
rm -rf conftest*
@@ -8100,20 +9184,356 @@ sparc*-*solaris*)
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
esac
;;
esac
fi
rm -rf conftest*
;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+echo "${ECHO_T}$DSYMUTIL" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
+echo "${ECHO_T}$NMEDIT" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
-need_locks="$enable_libtool_lock"
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
+ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ lt_cv_ld_exported_symbols_list=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8600,26 +10020,19 @@ done
for ac_header in dlfcn.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
+
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
@@ -8639,108 +10052,532 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
+ eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_compiler=no
+ eval "$as_ac_Header=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+fi
+
+done
+
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <$ac_header>
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
- }; then
- ac_header_preproc=yes
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_preproc=no
+ ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## -------------------------------- ##
-## Report this to help@hdfgroup.org ##
-## -------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cxx_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- eval "$as_ac_Header=\$ac_header_preproc"
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CXXFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-done
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+depcc="$CXX" am_compiler_list=
+
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
@@ -8959,37 +10796,38 @@ rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
:
else
- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ _lt_caught_CXX_error=yes
fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+else
+ _lt_caught_CXX_error=yes
fi
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
if test -n "$ac_tool_prefix"; then
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
+ for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
+if test "${ac_cv_prog_FC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$F77"; then
- ac_cv_prog_F77="$F77" # Let the user override the test.
+ if test -n "$FC"; then
+ ac_cv_prog_FC="$FC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -8998,7 +10836,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+ ac_cv_prog_FC="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -9008,32 +10846,32 @@ IFS=$as_save_IFS
fi
fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
- { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
+FC=$ac_cv_prog_FC
+if test -n "$FC"; then
+ { echo "$as_me:$LINENO: result: $FC" >&5
+echo "${ECHO_T}$FC" >&6; }
else
{ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
- test -n "$F77" && break
+ test -n "$FC" && break
done
fi
-if test -z "$F77"; then
- ac_ct_F77=$F77
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
+if test -z "$FC"; then
+ ac_ct_FC=$FC
+ for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+if test "${ac_cv_prog_ac_ct_FC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$ac_ct_F77"; then
- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+ if test -n "$ac_ct_FC"; then
+ ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -9042,7 +10880,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_F77="$ac_prog"
+ ac_cv_prog_ac_ct_FC="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -9052,21 +10890,21 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
- { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
+ac_ct_FC=$ac_cv_prog_ac_ct_FC
+if test -n "$ac_ct_FC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_FC" >&5
+echo "${ECHO_T}$ac_ct_FC" >&6; }
else
{ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
- test -n "$ac_ct_F77" && break
+ test -n "$ac_ct_FC" && break
done
- if test "x$ac_ct_F77" = x; then
- F77=""
+ if test "x$ac_ct_FC" = x; then
+ FC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -9078,13 +10916,13 @@ whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
- F77=$ac_ct_F77
+ FC=$ac_ct_FC
fi
fi
# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
+echo "$as_me:$LINENO: checking for Fortran compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
@@ -9122,9 +10960,9 @@ rm -f a.out
# input file. (Note that this only needs to work for GNU compilers.)
ac_save_ext=$ac_ext
ac_ext=F
-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran compiler... $ECHO_C" >&6; }
+if test "${ac_cv_fc_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -9149,7 +10987,7 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
+ test -z "$ac_fc_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
@@ -9161,21 +10999,21 @@ sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+ac_cv_fc_compiler_gnu=$ac_compiler_gnu
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
+{ echo "$as_me:$LINENO: result: $ac_cv_fc_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_fc_compiler_gnu" >&6; }
ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
+ac_test_FFLAGS=${FCFLAGS+set}
+ac_save_FFLAGS=$FCFLAGS
+FCFLAGS=
+{ echo "$as_me:$LINENO: checking whether $FC accepts -g" >&5
+echo $ECHO_N "checking whether $FC accepts -g... $ECHO_C" >&6; }
+if test "${ac_cv_prog_fc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- FFLAGS=-g
+ FCFLAGS=-g
cat >conftest.$ac_ext <<_ACEOF
program main
@@ -9195,380 +11033,218 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
+ test -z "$ac_fc_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
- ac_cv_prog_f77_g=yes
+ ac_cv_prog_fc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_prog_f77_g=no
+ ac_cv_prog_fc_g=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_fc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_fc_g" >&6; }
if test "$ac_test_FFLAGS" = set; then
- FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-g -O2"
+ FCFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_fc_g = yes; then
+ if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+ FCFLAGS="-g -O2"
else
- FFLAGS="-g"
+ FCFLAGS="-g"
fi
else
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-O2"
+ if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+ FCFLAGS="-O2"
else
- FFLAGS=
+ FCFLAGS=
fi
fi
-G77=`test $ac_compiler_gnu = yes && echo yes`
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+
+# Set options
+
+
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
else
- i=0
- teststring="ABCD"
+ enable_shared=yes
+fi
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- ;;
- esac
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
- { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then
+ withval=$with_pic; pic_mode="$withval"
else
- { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
+ pic_mode=default
fi
+test -z "$pic_mode" && pic_mode=default
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
else
+ enable_fast_install=yes
+fi
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux*)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDGIRSTW]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
- # Check to see that the pipe works correctly.
- pipe_works=no
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
- { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
fi
{ echo "$as_me:$LINENO: checking for objdir" >&5
@@ -9594,6 +11270,26 @@ objdir=$lt_cv_objdir
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
@@ -9608,360 +11304,41 @@ esac
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
-# Constants:
-rm="rm -f"
-
# Global variables:
-default_ofile=libtool
+ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
+with_gnu_ld="$lt_cv_prog_gnu_ld"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
for cc_temp in $compiler""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
@@ -9970,10 +11347,11 @@ for cc_temp in $compiler""; do
*) break;;
esac
done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
@@ -10004,7 +11382,7 @@ else
$EGREP "$file_magic_regex" > /dev/null; then
:
else
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -10015,7 +11393,7 @@ else
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
-EOF
+_LT_EOF
fi ;;
esac
fi
@@ -10037,6 +11415,10 @@ else
echo "${ECHO_T}no" >&6; }
fi
+
+
+
+
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
{ echo "$as_me:$LINENO: checking for file" >&5
@@ -10066,7 +11448,7 @@ else
$EGREP "$file_magic_regex" > /dev/null; then
:
else
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -10077,7 +11459,7 @@ else
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
-EOF
+_LT_EOF
fi ;;
esac
fi
@@ -10099,6 +11481,7 @@ else
echo "${ECHO_T}no" >&6; }
fi
+
else
MAGIC_CMD=:
fi
@@ -10108,28 +11491,8 @@ fi
;;
esac
-enable_dlopen=yes
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
- withval=$with_pic; pic_mode="$withval"
-else
- pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
# Use C for the default configuration in the libtool script
-tagname=
+
lt_save_CC="$CC"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -10146,10 +11509,15 @@ objext=o
objext=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
# If no C compiler was specified, use CC.
@@ -10161,36 +11529,39 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM -r conftest*
+if test -n "$compiler"; then
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -10201,21 +11572,21 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:10204: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11575: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:10208: \$? = $ac_status" >&5
+ echo "$as_me:11579: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
- $rm conftest*
+ $RM conftest*
fi
{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
@@ -10229,7 +11600,12 @@ fi
fi
-lt_prog_compiler_wl=
+
+
+
+
+
+ lt_prog_compiler_wl=
lt_prog_compiler_pic=
lt_prog_compiler_static=
@@ -10250,19 +11626,29 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
@@ -10272,7 +11658,20 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
lt_prog_compiler_pic='-fno-common'
;;
- interix3*)
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -10284,25 +11683,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
enable_shared=no
;;
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic=-Kconform_pic
fi
;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
-
*)
lt_prog_compiler_pic='-fPIC'
;;
@@ -10319,18 +11711,8 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic='-qnocommon'
- lt_prog_compiler_wl='-Wl,'
- ;;
- esac
- ;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -10358,14 +11740,9 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
lt_prog_compiler_static='-non_shared'
;;
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- linux*)
+ linux* | k*bsd*-gnu)
case $cc_basename in
- icc* | ecc*)
+ icc* | ecc* | ifort*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
@@ -10382,15 +11759,52 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ esac
+ ;;
esac
;;
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
osf3* | osf4* | osf5*)
lt_prog_compiler_wl='-Wl,'
# All OSF/1 code is PIC.
lt_prog_compiler_static='-non_shared'
;;
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
solaris*)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
@@ -10443,22 +11857,35 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
esac
fi
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -10469,27 +11896,27 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:10472: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11899: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:10476: \$? = $ac_status" >&5
+ echo "$as_me:11903: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works=yes
+ lt_cv_prog_compiler_pic_works=yes
fi
fi
- $rm conftest*
+ $RM conftest*
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_prog_compiler_pic_works" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -10500,15 +11927,11 @@ else
fi
fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
- ;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
-esac
+
+
+
+
+
#
# Check to make sure the static flag actually works.
@@ -10516,53 +11939,113 @@ esac
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_static_works=no
+ lt_cv_prog_compiler_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works=yes
+ lt_cv_prog_compiler_static_works=yes
fi
else
- lt_prog_compiler_static_works=yes
+ lt_cv_prog_compiler_static_works=yes
fi
fi
- $rm conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_prog_compiler_static_works" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
:
else
lt_prog_compiler_static=
fi
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:12004: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:12008: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o=no
- $rm -r conftest 2>/dev/null
+ $RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -10573,43 +12056,45 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:10576: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12059: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:10580: \$? = $ac_status" >&5
+ echo "$as_me:12063: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
fi
fi
chmod u+w . 2>&5
- $rm conftest*
+ $RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
cd ..
- rmdir conftest
- $rm conftest*
+ $RM -r conftest
+ $RM conftest*
fi
{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
+
+
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
- $rm conftest*
+ $RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -10625,31 +12110,39 @@ else
need_locks=no
fi
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
runpath_var=
allow_undefined_flag=
- enable_shared_with_static_runtimes=no
+ always_export_symbols=no
archive_cmds=
archive_expsym_cmds=
- old_archive_From_new_cmds=
- old_archive_from_expsyms_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
export_dynamic_flag_spec=
- whole_archive_flag_spec=
- thread_safe_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld=
hardcode_libdir_separator=
- hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
link_all_deplibs=unknown
- hardcode_automatic=no
module_cmds=
module_expsym_cmds=
- always_export_symbols=no
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
@@ -10657,23 +12150,14 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
- exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
case $host_os in
cygwin* | mingw* | pw32*)
@@ -10702,16 +12186,16 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
export_dynamic_flag_spec='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
+ case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -10721,11 +12205,11 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
# See if GNU ld supports shared libraries.
case $host_os in
- aix3* | aix4* | aix5*)
+ aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
@@ -10733,26 +12217,27 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
-EOF
+_LT_EOF
fi
;;
amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
;;
beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -10763,15 +12248,15 @@ EOF
;;
cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
@@ -10787,7 +12272,7 @@ EOF
fi
;;
- interix3*)
+ interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -10802,39 +12287,75 @@ EOF
archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
tmp_addflag=
+ tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
+ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
else
- ld_shlibs=no
+ ld_shlibs=no
fi
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
@@ -10844,9 +12365,9 @@ EOF
;;
solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
@@ -10855,8 +12376,8 @@ EOF
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
@@ -10880,10 +12401,14 @@ EOF
_LT_EOF
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -10899,7 +12424,7 @@ _LT_EOF
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
@@ -10931,7 +12456,7 @@ _LT_EOF
fi
;;
- aix4* | aix5*)
+ aix[4-9]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
@@ -10941,22 +12466,22 @@ _LT_EOF
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
done
;;
esac
@@ -10973,28 +12498,30 @@ _LT_EOF
archive_cmds=''
hardcode_direct=yes
+ hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
if test "$GCC" = yes; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
- # We have reworked collect2
- hardcode_direct=yes
+ # We have reworked collect2
+ :
else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
fi
;;
esac
@@ -11005,8 +12532,8 @@ _LT_EOF
else
# not using gcc
if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -11024,8 +12551,9 @@ _LT_EOF
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -11067,11 +12595,18 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -11083,15 +12618,16 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
else
- # Determine the default libpath from the value encoded in an empty executable.
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -11134,11 +12670,18 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -11165,11 +12708,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
;;
amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
;;
bsdi[45]*)
@@ -11188,63 +12738,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds='true'
+ old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes=yes
;;
darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
- link_all_deplibs=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
- fi
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ if test "$GCC" = "yes"; then
+ output_verbose_link_cmd=echo
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
;;
dgux*)
@@ -11277,7 +12800,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu | dragonfly*)
+ freebsd* | dragonfly*)
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
@@ -11286,9 +12809,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hpux9*)
if test "$GCC" = yes; then
- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
@@ -11308,11 +12831,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
fi
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
hardcode_libdir_separator=:
-
hardcode_direct=yes
+ hardcode_direct_absolute=yes
export_dynamic_flag_spec='${wl}-E'
-
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
@@ -11351,12 +12874,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
case $host_cpu in
hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld='+b $libdir'
hardcode_direct=no
hardcode_shlibpath_var=no
;;
*)
hardcode_direct=yes
+ hardcode_direct_absolute=yes
export_dynamic_flag_spec='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
@@ -11369,18 +12892,58 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
+ archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
+ inherit_rpath=yes
link_all_deplibs=yes
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
@@ -11398,25 +12961,33 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_shlibpath_var=no
;;
+ *nto* | *qnx*)
+ ;;
+
openbsd*)
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ ld_shlibs=no
fi
;;
@@ -11424,18 +12995,19 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
fi
+ archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
@@ -11443,49 +13015,59 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
+ archive_cmds_need_lc='no'
hardcode_libdir_separator=:
;;
solaris*)
- no_undefined_flag=' -z text'
+ no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
esac
link_all_deplibs=yes
;;
@@ -11542,7 +13124,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
no_undefined_flag='${wl}-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
@@ -11568,18 +13150,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
allow_undefined_flag='${wl}-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
export_dynamic_flag_spec='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -11593,12 +13175,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
ld_shlibs=no
;;
esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
fi
{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
echo "${ECHO_T}$ld_shlibs" >&6; }
test "$ld_shlibs" = no && can_build_shared=no
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
#
# Do we need to explicitly link libc?
#
@@ -11618,8 +13224,8 @@ x|xyes)
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -11639,8 +13245,8 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
@@ -11653,7 +13259,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
else
cat conftest.err 1>&5
fi
- $rm conftest*
+ $RM conftest*
{ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
;;
@@ -11662,8 +13268,216 @@ echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
;;
esac
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -11677,20 +13491,6 @@ shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -11708,7 +13508,7 @@ aix3*)
soname_spec='${libname}${release}${shared_ext}$major'
;;
-aix4* | aix5*)
+aix[4-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -11727,7 +13527,7 @@ aix4* | aix5*)
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -11753,9 +13553,18 @@ aix4* | aix5*)
;;
amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
;;
beos*)
@@ -11789,14 +13598,17 @@ cygwin* | mingw* | pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
- $rm \$dlpath'
+ $RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
@@ -11808,17 +13620,17 @@ cygwin* | mingw* | pw32*)
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
@@ -11842,17 +13654,13 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -11869,18 +13677,6 @@ freebsd1*)
dynamic_linker=no
;;
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -11918,7 +13714,7 @@ freebsd* | dragonfly*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- freebsd*) # from 4.6 on
+ *) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -11957,18 +13753,18 @@ hpux9* | hpux10* | hpux11*)
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
@@ -11981,7 +13777,7 @@ hpux9* | hpux10* | hpux11*)
postinstall_cmds='chmod 555 $lib'
;;
-interix3*)
+interix[3-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -12036,7 +13832,7 @@ linux*oldld* | linux*aout* | linux*coff*)
;;
# This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -12045,6 +13841,68 @@ linux*)
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+ shlibpath_overrides_runpath=yes
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -12052,7 +13910,7 @@ linux*)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -12065,23 +13923,11 @@ linux*)
dynamic_linker='GNU/Linux ld.so'
;;
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -12102,14 +13948,16 @@ newsos6)
shlibpath_overrides_runpath=yes
;;
-nto-qnx*)
- version_type=linux
+*nto* | *qnx*)
+ version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
;;
openbsd*)
@@ -12118,13 +13966,13 @@ openbsd*)
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
esac
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
@@ -12158,6 +14006,10 @@ osf3* | osf4* | osf5*)
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+rdos*)
+ dynamic_linker=no
+ ;;
+
solaris*)
version_type=linux
need_lib_prefix=no
@@ -12192,7 +14044,6 @@ sysv4 | sysv4.3*)
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -12223,13 +14074,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test "$with_gnu_ld" = yes; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -12239,6 +14089,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
sys_lib_dlsearch_path_spec='/usr/lib'
;;
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -12259,19 +14120,112 @@ if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var" || \
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
test "X$hardcode_automatic" = "Xyes" ; then
- # We can hardcode non-existant directories.
+ # We can hardcode non-existent directories.
if test "$hardcode_direct" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
@@ -12287,7 +14241,8 @@ fi
{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
echo "${ECHO_T}$hardcode_action" >&6; }
-if test "$hardcode_action" = relink; then
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
@@ -12296,36 +14251,12 @@ elif test "$shlibpath_overrides_runpath" = yes ||
enable_fast_install=needless
fi
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
- ;;
- *)
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- ;;
- esac
-fi
-if test "x$enable_dlopen" != xyes; then
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -12343,12 +14274,12 @@ else
mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
- ;;
+ ;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
- ;;
+ ;;
darwin*)
# if libdl is installed we need to link against it
@@ -12431,7 +14362,7 @@ else
fi
- ;;
+ ;;
*)
{ echo "$as_me:$LINENO: checking for shl_load" >&5
@@ -12596,7 +14527,7 @@ fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
if test $ac_cv_lib_dld_shl_load = yes; then
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
{ echo "$as_me:$LINENO: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
@@ -12904,7 +14835,7 @@ fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
if test $ac_cv_lib_dld_dld_link = yes; then
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
@@ -12952,8 +14883,8 @@ else
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 12956 "configure"
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 14887 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13015,7 +14946,7 @@ int main ()
exit (status);
}
-EOF
+_LT_EOF
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
@@ -13052,8 +14983,8 @@ else
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 13056 "configure"
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 14987 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13115,7 +15046,7 @@ int main ()
exit (status);
}
-EOF
+_LT_EOF
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
@@ -13159,524 +15090,103 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
fi
-# Report which library types will actually be built
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler \
- CC \
- LD \
- lt_prog_compiler_wl \
- lt_prog_compiler_pic \
- lt_prog_compiler_static \
- lt_prog_compiler_no_builtin_flag \
- export_dynamic_flag_spec \
- thread_safe_flag_spec \
- whole_archive_flag_spec \
- enable_shared_with_static_runtimes \
- old_archive_cmds \
- old_archive_from_new_cmds \
- predep_objects \
- postdep_objects \
- predeps \
- postdeps \
- compiler_lib_search_path \
- archive_cmds \
- archive_expsym_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- old_archive_from_expsyms_cmds \
- allow_undefined_flag \
- no_undefined_flag \
- export_symbols_cmds \
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
- hardcode_automatic \
- module_cmds \
- module_expsym_cmds \
- lt_cv_prog_compiler_c_o \
- exclude_expsyms \
- include_expsyms; do
-
- case $var in
- old_archive_cmds | \
- old_archive_from_new_cmds | \
- archive_cmds | \
- archive_expsym_cmds | \
- module_cmds | \
- module_expsym_cmds | \
- old_archive_from_expsyms_cmds | \
- export_symbols_cmds | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
- cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-# A sed program that does not truncate output.
-SED=$lt_SED
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-# ### BEGIN LIBTOOL CONFIG
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
+striplib=
+old_striplib=
+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ fi
+ ;;
+ *)
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ ;;
+ esac
+fi
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-# ### END LIBTOOL CONFIG
-__EOF__
+ # Report which library types will actually be built
+ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+ { echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
+ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
case $host_os in
aix3*)
- cat <<\EOF >> "$cfgfile"
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
;;
esac
+ { echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
+fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -13686,85 +15196,27 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
- withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
- else
- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
- "") ;;
- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
+ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
archive_cmds_need_lc_CXX=no
allow_undefined_flag_CXX=
always_export_symbols_CXX=no
archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
export_dynamic_flag_spec_CXX=
hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
hardcode_libdir_flag_spec_CXX=
hardcode_libdir_flag_spec_ld_CXX=
hardcode_libdir_separator_CXX=
hardcode_minus_L_CXX=no
hardcode_shlibpath_var_CXX=unsupported
hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
module_cmds_CXX=
module_expsym_cmds_CXX=
link_all_deplibs_CXX=unknown
@@ -13773,13 +15225,6 @@ no_undefined_flag_CXX=
whole_archive_flag_spec_CXX=
enable_shared_with_static_runtimes_CXX=no
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
# Source file extension for C++ test sources.
ac_ext=cpp
@@ -13787,13 +15232,23 @@ ac_ext=cpp
objext=o
objext_CXX=$objext
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
@@ -13805,42 +15260,42 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
compiler=$CC
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
+$RM -r conftest*
+
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
@@ -13848,19 +15303,21 @@ for cc_temp in $compiler""; do
*) break;;
esac
done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
- lt_prog_compiler_no_builtin_flag_CXX=
-fi
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
# Check whether --with-gnu-ld was given.
@@ -13887,9 +15344,9 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -13970,149 +15427,156 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_CXX=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-# PORTME: fill in a description of your system's C++ link characteristics
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
- archive_cmds_CXX=''
- hardcode_direct_CXX=yes
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct_CXX=yes
- else
- # We have old collect2
- hardcode_direct_CXX=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_CXX=yes
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- hardcode_libdir_separator_CXX=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
fi
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_CXX=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_CXX='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -14154,11 +15618,18 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -14170,17 +15641,18 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_CXX="-z nodefs"
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -14222,11 +15694,18 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -14238,742 +15717,762 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_CXX=' ${wl}-bernotok'
- allow_undefined_flag_CXX=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_CXX='$convenience'
- archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_CXX=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' ${wl}-bernotok'
+ allow_undefined_flag_CXX=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ archive_cmds_need_lc_CXX=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
;;
- esac
- ;;
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- allow_undefined_flag_CXX=unsupported
- always_export_symbols_CXX=no
- enable_shared_with_static_runtimes_CXX=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
esac
- archive_cmds_need_lc_CXX=no
- hardcode_direct_CXX=no
- hardcode_automatic_CXX=yes
- hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX=''
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
else
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_CXX=no
- ;;
- esac
- fi
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
;;
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ whole_archive_flag_spec_CXX=''
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ if test "$GCC" = "yes"; then
+ output_verbose_link_cmd=echo
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+
+ else
+ ld_shlibs_CXX=no
+ fi
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
;;
- esac
- ;;
- freebsd[12]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- ld_shlibs_CXX=no
- ;;
- freebsd-elf*)
- archive_cmds_need_lc_CXX=no
- ;;
- freebsd* | kfreebsd*-gnu | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- ld_shlibs_CXX=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- export_dynamic_flag_spec_CXX='${wl}-E'
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ freebsd[12]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
+ ;;
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
;;
- *)
- export_dynamic_flag_spec_CXX='${wl}-E'
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- ;;
- *)
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ gnu*)
+ ;;
+
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
+ hppa*64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
esac
- fi
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- interix3*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- link_all_deplibs_CXX=yes
- ;;
- esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- ;;
- linux*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- archive_cmds_need_lc_CXX=no
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- pgCC*)
- # Portland Group C++ compiler
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
;;
- cxx*)
- # Compaq C++
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- ld_shlibs_CXX=no
- ;;
- openbsd*)
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 will use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- cxx*)
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
ld_shlibs_CXX=no
;;
- cxx*)
- allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
else
- # FIXME: insert proper C++ library support
ld_shlibs_CXX=no
fi
;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- archive_cmds_need_lc_CXX=yes
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_shlibpath_var_CXX=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The C++ compiler is used as linker so we must use $wl
- # flag to pass the commands to the underlying system
- # linker. We must also pass each convience library through
- # to the system linker between allextract/defaultextract.
- # The C++ compiler will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
- ;;
- esac
- link_all_deplibs_CXX=yes
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
- # The C++ compiler must be used to create the archive.
- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+ hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='${wl}-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='${wl}-z,text'
+ allow_undefined_flag_CXX='${wl}-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_CXX='${wl}-z,text'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- no_undefined_flag_CXX='${wl}-z,text'
- allow_undefined_flag_CXX='${wl}-z,nodefs'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
- export_dynamic_flag_spec_CXX='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+
+ { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
-GCC_CXX="$GXX"
-LD_CXX="$LD"
+ GCC_CXX="$GXX"
+ LD_CXX="$LD"
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
-cat > conftest.$ac_ext <<EOF
+cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
@@ -14981,7 +16480,7 @@ public:
private:
int a;
};
-EOF
+_LT_EOF
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -14995,19 +16494,14 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
# the conftest object file.
pre_test_object_deps_done=no
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
+ for p in `eval "$output_verbose_link_cmd"`; do
case $p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
+ if test $p = "-L" ||
+ test $p = "-R"; then
prev=$p
continue
else
@@ -15072,11 +16566,11 @@ else
echo "libtool.m4: error: problem compiling CXX test program"
fi
-$rm -f confest.$objext
+$RM -f confest.$objext
# PORTME: override above test on systems where it is broken
case $host_os in
-interix3*)
+interix[3-9]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
predep_objects_CXX=
@@ -15084,13 +16578,47 @@ interix3*)
postdeps_CXX=
;;
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
solaris*)
case $cc_basename in
CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
- postdeps_CXX='-lCstd -lCrun'
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
;;
esac
;;
@@ -15100,8 +16628,42 @@ esac
case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-lt_prog_compiler_wl_CXX=
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX=
@@ -15121,18 +16683,30 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
lt_prog_compiler_static_CXX='-Bstatic'
fi
;;
+
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | os2* | pw32*)
+ mingw* | cygwin* | os2* | pw32*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
@@ -15144,7 +16718,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
# DJGPP does not support shared libraries at all
lt_prog_compiler_pic_CXX=
;;
- interix3*)
+ interix[3-9]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -15164,13 +16738,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
esac
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
*)
lt_prog_compiler_pic_CXX='-fPIC'
;;
esac
else
case $host_os in
- aix4* | aix5*)
+ aix[4-9]*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
@@ -15183,20 +16762,10 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
case $cc_basename in
cxch68*)
# Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_CXX='-qnocommon'
- lt_prog_compiler_wl_CXX='-Wl,'
- ;;
- esac
- ;;
dgux*)
case $cc_basename in
ec++*)
@@ -15210,7 +16779,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
esac
;;
- freebsd* | kfreebsd*-gnu | dragonfly*)
+ freebsd* | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
@@ -15253,21 +16822,21 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
esac
;;
- linux*)
+ linux* | k*bsd*-gnu)
case $cc_basename in
KCC*)
# KAI C++ Compiler
lt_prog_compiler_wl_CXX='--backend -Wl,'
lt_prog_compiler_pic_CXX='-fPIC'
;;
- icpc* | ecpc*)
+ icpc* | ecpc* )
# Intel C++
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-static'
;;
- pgCC*)
- # Portland Group C++ compiler.
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-fpic'
lt_prog_compiler_static_CXX='-Bstatic'
@@ -15279,7 +16848,21 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX='-non_shared'
;;
+ xlc* | xlC*)
+ # IBM XL 8.0 on PPC
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
;;
esac
;;
@@ -15298,6 +16881,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
netbsd*)
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
@@ -15352,22 +16940,22 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
;;
esac
;;
- tandem*)
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- *)
+ lt_prog_compiler_static_CXX='-Bstatic'
;;
esac
;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ tandem*)
case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
+ NCC*)
+ # NonStop-UX NCC 3.20
lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ *)
;;
esac
;;
@@ -15379,22 +16967,32 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
esac
fi
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+ ;;
+esac
{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
+
+
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_pic_works_CXX=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -15405,27 +17003,27 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15408: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:17006: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:15412: \$? = $ac_status" >&5
+ echo "$as_me:17010: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_CXX=yes
+ lt_cv_prog_compiler_pic_works_CXX=yes
fi
fi
- $rm conftest*
+ $RM conftest*
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
case $lt_prog_compiler_pic_CXX in
"" | " "*) ;;
*) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -15436,15 +17034,8 @@ else
fi
fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_CXX=
- ;;
- *)
- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
- ;;
-esac
+
+
#
# Check to make sure the static flag actually works.
@@ -15452,53 +17043,55 @@ esac
wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_static_works_CXX=no
+ lt_cv_prog_compiler_static_works_CXX=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_CXX=yes
+ lt_cv_prog_compiler_static_works_CXX=yes
fi
else
- lt_prog_compiler_static_works_CXX=yes
+ lt_cv_prog_compiler_static_works_CXX=yes
fi
fi
- $rm conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; }
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
:
else
lt_prog_compiler_static_CXX=
fi
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o_CXX=no
- $rm -r conftest 2>/dev/null
+ $RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -15509,43 +17102,97 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15512: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:17105: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:15516: \$? = $ac_status" >&5
+ echo "$as_me:17109: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o_CXX=yes
fi
fi
chmod u+w . 2>&5
- $rm conftest*
+ $RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
cd ..
- rmdir conftest
- $rm conftest*
+ $RM -r conftest
+ $RM conftest*
fi
{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:17157: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:17161: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
- $rm conftest*
+ $RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -15561,35 +17208,45 @@ else
need_locks=no
fi
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+
+
+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
case $host_os in
- aix4* | aix5*)
+ aix[4-9]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
#
# Do we need to explicitly link libc?
#
@@ -15609,8 +17266,8 @@ x|xyes)
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -15630,8 +17287,8 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
allow_undefined_flag_CXX=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
@@ -15644,7 +17301,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
else
cat conftest.err 1>&5
fi
- $rm conftest*
+ $RM conftest*
{ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
;;
@@ -15653,8 +17310,72 @@ echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
;;
esac
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -15668,20 +17389,6 @@ shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -15699,7 +17406,7 @@ aix3*)
soname_spec='${libname}${release}${shared_ext}$major'
;;
-aix4* | aix5*)
+aix[4-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -15718,7 +17425,7 @@ aix4* | aix5*)
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -15744,9 +17451,18 @@ aix4* | aix5*)
;;
amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
;;
beos*)
@@ -15780,14 +17496,17 @@ cygwin* | mingw* | pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
- $rm \$dlpath'
+ $RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
@@ -15799,17 +17518,17 @@ cygwin* | mingw* | pw32*)
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
@@ -15833,17 +17552,12 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
+
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -15860,18 +17574,6 @@ freebsd1*)
dynamic_linker=no
;;
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -15909,7 +17611,7 @@ freebsd* | dragonfly*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- freebsd*) # from 4.6 on
+ *) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -15948,18 +17650,18 @@ hpux9* | hpux10* | hpux11*)
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
@@ -15972,7 +17674,7 @@ hpux9* | hpux10* | hpux11*)
postinstall_cmds='chmod 555 $lib'
;;
-interix3*)
+interix[3-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -16027,7 +17729,7 @@ linux*oldld* | linux*aout* | linux*coff*)
;;
# This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -16036,6 +17738,68 @@ linux*)
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+ shlibpath_overrides_runpath=yes
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -16043,7 +17807,7 @@ linux*)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -16056,23 +17820,11 @@ linux*)
dynamic_linker='GNU/Linux ld.so'
;;
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -16093,14 +17845,16 @@ newsos6)
shlibpath_overrides_runpath=yes
;;
-nto-qnx*)
- version_type=linux
+*nto* | *qnx*)
+ version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
;;
openbsd*)
@@ -16109,13 +17863,13 @@ openbsd*)
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
esac
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
@@ -16149,6 +17903,10 @@ osf3* | osf4* | osf5*)
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+rdos*)
+ dynamic_linker=no
+ ;;
+
solaris*)
version_type=linux
need_lib_prefix=no
@@ -16183,7 +17941,6 @@ sysv4 | sysv4.3*)
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -16214,13 +17971,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test "$with_gnu_ld" = yes; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -16230,6 +17986,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
sys_lib_dlsearch_path_spec='/usr/lib'
;;
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -16250,639 +18017,452 @@ if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
- test -n "$runpath_var_CXX" || \
- test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_CXX" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
- test "$hardcode_minus_L_CXX" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_CXX=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_CXX=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_CXX=unsupported
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
fi
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_CXX \
- CC_CXX \
- LD_CXX \
- lt_prog_compiler_wl_CXX \
- lt_prog_compiler_pic_CXX \
- lt_prog_compiler_static_CXX \
- lt_prog_compiler_no_builtin_flag_CXX \
- export_dynamic_flag_spec_CXX \
- thread_safe_flag_spec_CXX \
- whole_archive_flag_spec_CXX \
- enable_shared_with_static_runtimes_CXX \
- old_archive_cmds_CXX \
- old_archive_from_new_cmds_CXX \
- predep_objects_CXX \
- postdep_objects_CXX \
- predeps_CXX \
- postdeps_CXX \
- compiler_lib_search_path_CXX \
- archive_cmds_CXX \
- archive_expsym_cmds_CXX \
- postinstall_cmds_CXX \
- postuninstall_cmds_CXX \
- old_archive_from_expsyms_cmds_CXX \
- allow_undefined_flag_CXX \
- no_undefined_flag_CXX \
- export_symbols_cmds_CXX \
- hardcode_libdir_flag_spec_CXX \
- hardcode_libdir_flag_spec_ld_CXX \
- hardcode_libdir_separator_CXX \
- hardcode_automatic_CXX \
- module_cmds_CXX \
- module_expsym_cmds_CXX \
- lt_cv_prog_compiler_c_o_CXX \
- exclude_expsyms_CXX \
- include_expsyms_CXX; do
-
- case $var in
- old_archive_cmds_CXX | \
- old_archive_from_new_cmds_CXX | \
- archive_cmds_CXX | \
- archive_expsym_cmds_CXX | \
- module_cmds_CXX | \
- module_expsym_cmds_CXX | \
- old_archive_from_expsyms_cmds_CXX | \
- export_symbols_cmds_CXX | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-cfgfile="$ofile"
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-# Object file suffix (normally "o").
-objext="$ac_objext"
-# Old archive suffix (normally "a").
-libext="$libext"
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-# Executable file suffix (normally "").
-exeext="$exeext"
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-# Do we need a version for libraries?
-need_version=$need_version
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_CXX" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+ test "$hardcode_minus_L_CXX" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
+fi
+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-# Library versioning type.
-version_type=$version_type
+if test "$hardcode_action_CXX" = relink ||
+ test "$inherit_rpath_CXX" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+ fi # test -n "$compiler"
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+ ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+archive_cmds_need_lc_FC=no
+allow_undefined_flag_FC=
+always_export_symbols_FC=no
+archive_expsym_cmds_FC=
+export_dynamic_flag_spec_FC=
+hardcode_direct_FC=no
+hardcode_direct_absolute_FC=no
+hardcode_libdir_flag_spec_FC=
+hardcode_libdir_flag_spec_ld_FC=
+hardcode_libdir_separator_FC=
+hardcode_minus_L_FC=no
+hardcode_automatic_FC=no
+inherit_rpath_FC=no
+module_cmds_FC=
+module_expsym_cmds_FC=
+link_all_deplibs_FC=unknown
+old_archive_cmds_FC=$old_archive_cmds
+no_undefined_flag_FC=
+whole_archive_flag_spec_FC=
+enable_shared_with_static_runtimes_FC=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
+# Object file extension for compiled fc test sources.
+objext=o
+objext_FC=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
+# Allow CC to be a program name with arguments.
+compiler=$CC
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${FC-"f95"}
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
+ compiler_FC=$CC
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
+ if test -n "$compiler"; then
+ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+ { echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+ GCC_FC="$ac_cv_fc_compiler_gnu"
+ LD_FC="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_FC=
+postdep_objects_FC=
+predeps_FC=
+postdeps_FC=
+compiler_lib_search_path_FC=
+
+cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_FC"; then
+ compiler_lib_search_path_FC="${prev}${p}"
+ else
+ compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_FC"; then
+ postdeps_FC="${prev}${p}"
+ else
+ postdeps_FC="${postdeps_FC} ${prev}${p}"
+ fi
+ fi
+ ;;
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
-# ### END LIBTOOL TAG CONFIG: $tagname
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects_FC"; then
+ predep_objects_FC="$p"
+ else
+ predep_objects_FC="$predep_objects_FC $p"
+ fi
+ else
+ if test -z "$postdep_objects_FC"; then
+ postdep_objects_FC="$p"
+ else
+ postdep_objects_FC="$postdep_objects_FC $p"
+ fi
+ fi
+ ;;
-__EOF__
+ *) ;; # Ignore the rest.
+ esac
+ done
+ # Clean up.
+ rm -f a.out a.exe
else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
+ echo "libtool.m4: error: problem compiling FC test program"
fi
+$RM -f confest.$objext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code=" program t\n end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+# PORTME: override above test on systems where it is broken
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+case " $postdeps_FC " in
+*" -lc "*) archive_cmds_need_lc_FC=no ;;
+esac
+ compiler_lib_search_dirs_FC=
+if test -n "${compiler_lib_search_path_FC}"; then
+ compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
-# Allow CC to be a program name with arguments.
-compiler=$CC
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-GCC_F77="$G77"
-LD_F77="$LD"
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
+ lt_prog_compiler_wl_FC=
+lt_prog_compiler_pic_FC=
+lt_prog_compiler_static_FC=
{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
if test "$GCC" = yes; then
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_static_F77='-static'
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_static_FC='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_static_FC='-Bstatic'
fi
;;
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_FC='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_FC='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_F77='-fno-common'
+ lt_prog_compiler_pic_FC='-fno-common'
;;
- interix3*)
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_FC='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -16890,64 +18470,47 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
- lt_prog_compiler_can_build_shared_F77=no
+ lt_prog_compiler_can_build_shared_FC=no
enable_shared=no
;;
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_FC='-fPIC -shared'
+ ;;
+
sysv4*MP*)
if test -d /usr/nec; then
- lt_prog_compiler_pic_F77=-Kconform_pic
+ lt_prog_compiler_pic_FC=-Kconform_pic
fi
;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- ;;
-
*)
- lt_prog_compiler_pic_F77='-fPIC'
+ lt_prog_compiler_pic_FC='-fPIC'
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
- lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_wl_FC='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_static_FC='-Bstatic'
else
- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+ lt_prog_compiler_static_FC='-bnso -bI:/lib/syscalls.exp'
fi
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_F77='-qnocommon'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- esac
- ;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+ lt_prog_compiler_pic_FC='-DDLL_EXPORT'
;;
hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_wl_FC='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
@@ -16955,121 +18518,163 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
# +Z the default
;;
*)
- lt_prog_compiler_pic_F77='+Z'
+ lt_prog_compiler_pic_FC='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+ lt_prog_compiler_static_FC='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_wl_FC='-Wl,'
# PIC (with -KPIC) is the default.
- lt_prog_compiler_static_F77='-non_shared'
+ lt_prog_compiler_static_FC='-non_shared'
;;
- newsos6)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- linux*)
+ linux* | k*bsd*-gnu)
case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-static'
+ icc* | ecc* | ifort*)
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-fpic'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_pic_FC='-fpic'
+ lt_prog_compiler_static_FC='-Bstatic'
;;
ccc*)
- lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_wl_FC='-Wl,'
# All Alpha code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
+ lt_prog_compiler_static_FC='-non_shared'
;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_pic_FC='-qpic'
+ lt_prog_compiler_static_FC='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
+ lt_prog_compiler_wl_FC='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
+ lt_prog_compiler_wl_FC=''
+ ;;
+ esac
+ ;;
esac
;;
+ newsos6)
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_FC='-fPIC -shared'
+ ;;
+
osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_wl_FC='-Wl,'
# All OSF/1 code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
+ lt_prog_compiler_static_FC='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static_FC='-non_shared'
;;
solaris*)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
case $cc_basename in
f77* | f90* | f95*)
- lt_prog_compiler_wl_F77='-Qoption ld ';;
+ lt_prog_compiler_wl_FC='-Qoption ld ';;
*)
- lt_prog_compiler_wl_F77='-Wl,';;
+ lt_prog_compiler_wl_FC='-Wl,';;
esac
;;
sunos4*)
- lt_prog_compiler_wl_F77='-Qoption ld '
- lt_prog_compiler_pic_F77='-PIC'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_wl_FC='-Qoption ld '
+ lt_prog_compiler_pic_FC='-PIC'
+ lt_prog_compiler_static_FC='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
- lt_prog_compiler_pic_F77='-Kconform_pic'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_pic_FC='-Kconform_pic'
+ lt_prog_compiler_static_FC='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_pic_FC='-KPIC'
+ lt_prog_compiler_static_FC='-Bstatic'
;;
unicos*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_can_build_shared_F77=no
+ lt_prog_compiler_wl_FC='-Wl,'
+ lt_prog_compiler_can_build_shared_FC=no
;;
uts4*)
- lt_prog_compiler_pic_F77='-pic'
- lt_prog_compiler_static_F77='-Bstatic'
+ lt_prog_compiler_pic_FC='-pic'
+ lt_prog_compiler_static_FC='-Bstatic'
;;
*)
- lt_prog_compiler_can_build_shared_F77=no
+ lt_prog_compiler_can_build_shared_FC=no
;;
esac
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_FC=
+ ;;
+ *)
+ lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC"
+ ;;
+esac
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_FC" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_FC" >&6; }
+
+
#
# Check to make sure the PIC flag actually works.
#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
+if test -n "$lt_prog_compiler_pic_FC"; then
+ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... $ECHO_C" >&6; }
+if test "${lt_cv_prog_compiler_pic_works_FC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_pic_works_F77=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_F77"
+ lt_cv_prog_compiler_pic_works_FC=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_FC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -17079,100 +18684,95 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:17082: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:18687: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:17086: \$? = $ac_status" >&5
+ echo "$as_me:18691: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_F77=yes
+ lt_cv_prog_compiler_pic_works_FC=yes
fi
fi
- $rm conftest*
+ $RM conftest*
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_FC" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_FC" >&6; }
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
- case $lt_prog_compiler_pic_F77 in
+if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then
+ case $lt_prog_compiler_pic_FC in
"" | " "*) ;;
- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+ *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;;
esac
else
- lt_prog_compiler_pic_F77=
- lt_prog_compiler_can_build_shared_F77=no
+ lt_prog_compiler_pic_FC=
+ lt_prog_compiler_can_build_shared_FC=no
fi
fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_F77=
- ;;
- *)
- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
- ;;
-esac
+
+
#
# Check to make sure the static flag actually works.
#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\"
{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works_FC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_prog_compiler_static_works_F77=no
+ lt_cv_prog_compiler_static_works_FC=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_F77=yes
+ lt_cv_prog_compiler_static_works_FC=yes
fi
else
- lt_prog_compiler_static_works_F77=yes
+ lt_cv_prog_compiler_static_works_FC=yes
fi
fi
- $rm conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_FC" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_FC" >&6; }
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then
:
else
- lt_prog_compiler_static_F77=
+ lt_prog_compiler_static_FC=
fi
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+if test "${lt_cv_prog_compiler_c_o_FC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_cv_prog_compiler_c_o_F77=no
- $rm -r conftest 2>/dev/null
+ lt_cv_prog_compiler_c_o_FC=no
+ $RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -17183,43 +18783,97 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:17186: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:18786: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:17190: \$? = $ac_status" >&5
+ echo "$as_me:18790: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_F77=yes
+ lt_cv_prog_compiler_c_o_FC=yes
fi
fi
chmod u+w . 2>&5
- $rm conftest*
+ $RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
cd ..
- rmdir conftest
- $rm conftest*
+ $RM -r conftest
+ $RM conftest*
fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_FC" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
+
+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+if test "${lt_cv_prog_compiler_c_o_FC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o_FC=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:18838: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:18842: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_FC=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_FC" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
- $rm conftest*
+ $RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -17235,55 +18889,51 @@ else
need_locks=no
fi
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+
+
+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
runpath_var=
- allow_undefined_flag_F77=
- enable_shared_with_static_runtimes_F77=no
- archive_cmds_F77=
- archive_expsym_cmds_F77=
- old_archive_From_new_cmds_F77=
- old_archive_from_expsyms_cmds_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- thread_safe_flag_spec_F77=
- hardcode_libdir_flag_spec_F77=
- hardcode_libdir_flag_spec_ld_F77=
- hardcode_libdir_separator_F77=
- hardcode_direct_F77=no
- hardcode_minus_L_F77=no
- hardcode_shlibpath_var_F77=unsupported
- link_all_deplibs_F77=unknown
- hardcode_automatic_F77=no
- module_cmds_F77=
- module_expsym_cmds_F77=
- always_export_symbols_F77=no
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ allow_undefined_flag_FC=
+ always_export_symbols_FC=no
+ archive_cmds_FC=
+ archive_expsym_cmds_FC=
+ compiler_needs_object_FC=no
+ enable_shared_with_static_runtimes_FC=no
+ export_dynamic_flag_spec_FC=
+ export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic_FC=no
+ hardcode_direct_FC=no
+ hardcode_direct_absolute_FC=no
+ hardcode_libdir_flag_spec_FC=
+ hardcode_libdir_flag_spec_ld_FC=
+ hardcode_libdir_separator_FC=
+ hardcode_minus_L_FC=no
+ hardcode_shlibpath_var_FC=unsupported
+ inherit_rpath_FC=no
+ link_all_deplibs_FC=unknown
+ module_cmds_FC=
+ module_expsym_cmds_FC=
+ old_archive_from_new_cmds_FC=
+ old_archive_from_expsyms_cmds_FC=
+ thread_safe_flag_spec_FC=
+ whole_archive_flag_spec_FC=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
- include_expsyms_F77=
+ include_expsyms_FC=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
+ exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
case $host_os in
cygwin* | mingw* | pw32*)
@@ -17303,7 +18953,7 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
;;
esac
- ld_shlibs_F77=yes
+ ld_shlibs_FC=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -17312,16 +18962,16 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_FC='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_F77=
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_FC=
fi
supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
+ case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -17331,11 +18981,11 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
# See if GNU ld supports shared libraries.
case $host_os in
- aix3* | aix4* | aix5*)
+ aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
+ ld_shlibs_FC=no
+ cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
@@ -17343,49 +18993,50 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
-EOF
+_LT_EOF
fi
;;
amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_F77=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC=''
+ ;;
+ m68k)
+ archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_minus_L_FC=yes
+ ;;
+ esac
;;
beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_F77=unsupported
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_FC=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless,
# as there is no search path for DLLs.
- hardcode_libdir_flag_spec_F77='-L$libdir'
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=no
- enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ allow_undefined_flag_FC=unsupported
+ always_export_symbols_FC=no
+ enable_shared_with_static_runtimes_FC=yes
+ export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
@@ -17393,70 +19044,106 @@ EOF
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
- interix3*)
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
+ interix[3-9]*)
+ hardcode_direct_FC=no
+ hardcode_shlibpath_var_FC=no
+ hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_FC='${wl}-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
tmp_addflag=
+ tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
+ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_FC=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
esac
- archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec_FC=
+ hardcode_libdir_flag_spec_ld_FC='-rpath $libdir'
+ archive_cmds_FC='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs_FC=no
+ cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
@@ -17465,19 +19152,19 @@ EOF
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
@@ -17490,58 +19177,62 @@ EOF
_LT_EOF
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
esac
;;
sunos4*)
- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds_FC='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
+ hardcode_direct_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
fi
;;
esac
- if test "$ld_shlibs_F77" = no; then
+ if test "$ld_shlibs_FC" = no; then
runpath_var=
- hardcode_libdir_flag_spec_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
+ hardcode_libdir_flag_spec_FC=
+ export_dynamic_flag_spec_FC=
+ whole_archive_flag_spec_FC=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=yes
- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ allow_undefined_flag_FC=unsupported
+ always_export_symbols_FC=yes
+ archive_expsym_cmds_FC='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
- hardcode_minus_L_F77=yes
+ hardcode_minus_L_FC=yes
if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
- hardcode_direct_F77=unsupported
+ hardcode_direct_FC=unsupported
fi
;;
- aix4* | aix5*)
+ aix[4-9]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
@@ -17551,22 +19242,22 @@ _LT_EOF
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
done
;;
esac
@@ -17581,30 +19272,32 @@ _LT_EOF
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- archive_cmds_F77=''
- hardcode_direct_F77=yes
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
+ archive_cmds_FC=''
+ hardcode_direct_FC=yes
+ hardcode_direct_absolute_FC=yes
+ hardcode_libdir_separator_FC=':'
+ link_all_deplibs_FC=yes
+ file_list_spec_FC='${wl}-f,'
if test "$GCC" = yes; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
- # We have reworked collect2
- hardcode_direct_F77=yes
+ # We have reworked collect2
+ :
else
- # We have old collect2
- hardcode_direct_F77=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_F77=yes
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_libdir_separator_F77=
+ # We have old collect2
+ hardcode_direct_FC=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_FC=yes
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_libdir_separator_FC=
fi
;;
esac
@@ -17615,8 +19308,8 @@ _LT_EOF
else
# not using gcc
if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -17629,13 +19322,14 @@ _LT_EOF
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_F77=yes
+ always_export_symbols_FC=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- allow_undefined_flag_F77='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
+ allow_undefined_flag_FC='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
program main
end
@@ -17654,16 +19348,23 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
+ test -z "$ac_fc_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -17675,15 +19376,16 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
+ hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_F77="-z nodefs"
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_FC="-z nodefs"
+ archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
else
- # Determine the default libpath from the value encoded in an empty executable.
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
cat >conftest.$ac_ext <<_ACEOF
program main
@@ -17703,16 +19405,23 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
+ test -z "$ac_fc_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -17724,30 +19433,37 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag_F77=' ${wl}-bernotok'
- allow_undefined_flag_F77=' ${wl}-berok'
+ no_undefined_flag_FC=' ${wl}-bernotok'
+ allow_undefined_flag_FC=' ${wl}-berok'
# Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_F77='$convenience'
- archive_cmds_need_lc_F77=yes
+ whole_archive_flag_spec_FC='$convenience'
+ archive_cmds_need_lc_FC=yes
# This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_F77=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_FC=''
+ ;;
+ m68k)
+ archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_minus_L_FC=yes
+ ;;
+ esac
;;
bsdi[45]*)
- export_dynamic_flag_spec_F77=-rdynamic
+ export_dynamic_flag_spec_FC=-rdynamic
;;
cygwin* | mingw* | pw32*)
@@ -17755,80 +19471,53 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- hardcode_libdir_flag_spec_F77=' '
- allow_undefined_flag_F77=unsupported
+ hardcode_libdir_flag_spec_FC=' '
+ allow_undefined_flag_FC=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_F77='true'
+ old_archive_from_new_cmds_FC='true'
# FIXME: Should let the user specify the lib program.
- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_F77=yes
+ old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path_FC='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes_FC=yes
;;
darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_F77=no
- hardcode_direct_F77=no
- hardcode_automatic_F77=yes
- hardcode_shlibpath_var_F77=unsupported
- whole_archive_flag_spec_F77=''
- link_all_deplibs_F77=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
+
+
+ archive_cmds_need_lc_FC=no
+ hardcode_direct_FC=no
+ hardcode_automatic_FC=yes
+ hardcode_shlibpath_var_FC=unsupported
+ whole_archive_flag_spec_FC=''
+ link_all_deplibs_FC=yes
+ allow_undefined_flag_FC="$_lt_dar_allow_undefined"
+ if test "$GCC" = "yes"; then
+ output_verbose_link_cmd=echo
+ archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs_FC=no
+ fi
+
;;
dgux*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_shlibpath_var_FC=no
;;
freebsd1*)
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -17836,60 +19525,60 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec_FC='-R$libdir'
+ hardcode_direct_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct_FC=yes
+ hardcode_minus_L_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu | dragonfly*)
- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
+ freebsd* | dragonfly*)
+ archive_cmds_FC='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec_FC='-R$libdir'
+ hardcode_direct_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
hpux9*)
if test "$GCC" = yes; then
- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_direct_F77=yes
+ hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_FC=:
+ hardcode_direct_FC=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- hardcode_minus_L_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
+ hardcode_minus_L_FC=yes
+ export_dynamic_flag_spec_FC='${wl}-E'
;;
hpux10*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
+ hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld_FC='+b $libdir'
+ hardcode_libdir_separator_FC=:
+ hardcode_direct_FC=yes
+ hardcode_direct_absolute_FC=yes
+ export_dynamic_flag_spec_FC='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- hardcode_minus_L_F77=yes
+ hardcode_minus_L_FC=yes
fi
;;
@@ -17897,45 +19586,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
fi
if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
+ hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_FC=:
case $host_cpu in
hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_F77='+b $libdir'
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
+ hardcode_direct_FC=no
+ hardcode_shlibpath_var_FC=no
;;
*)
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
+ hardcode_direct_FC=yes
+ hardcode_direct_absolute_FC=yes
+ export_dynamic_flag_spec_FC='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- hardcode_minus_L_F77=yes
+ hardcode_minus_L_FC=yes
;;
esac
fi
@@ -17943,191 +19632,250 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_fc_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
else
- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
+ archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- link_all_deplibs_F77=yes
+ archive_cmds_need_lc_FC='no'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_FC=:
+ inherit_rpath_FC=yes
+ link_all_deplibs_FC=yes
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ archive_cmds_FC='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
+ hardcode_libdir_flag_spec_FC='-R$libdir'
+ hardcode_direct_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
newsos6)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct_FC=yes
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_FC=:
+ hardcode_shlibpath_var_FC=no
+ ;;
+
+ *nto* | *qnx*)
;;
openbsd*)
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_FC=yes
+ hardcode_shlibpath_var_FC=no
+ hardcode_direct_absolute_FC=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_FC='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec_FC='-R$libdir'
+ ;;
+ *)
+ archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- ;;
- *)
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- ;;
- esac
+ ld_shlibs_FC=no
fi
;;
os2*)
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- allow_undefined_flag_F77=unsupported
- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_minus_L_FC=yes
+ allow_undefined_flag_FC=unsupported
+ archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ allow_undefined_flag_FC=' -expect_unresolved \*'
+ archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
+ archive_cmds_need_lc_FC='no'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_FC=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+ allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+ allow_undefined_flag_FC=' -expect_unresolved \*'
+ archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_F77='-rpath $libdir'
+ hardcode_libdir_flag_spec_FC='-rpath $libdir'
fi
- hardcode_libdir_separator_F77=:
+ archive_cmds_need_lc_FC='no'
+ hardcode_libdir_separator_FC=:
;;
solaris*)
- no_undefined_flag_F77=' -z text'
+ no_undefined_flag_FC=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ archive_cmds_FC='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
- wlarc=''
- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_shlibpath_var_F77=no
+ hardcode_libdir_flag_spec_FC='-R$libdir'
+ hardcode_shlibpath_var_FC=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
esac
- link_all_deplibs_F77=yes
+ link_all_deplibs_FC=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_direct_FC=yes
+ hardcode_minus_L_FC=yes
+ hardcode_shlibpath_var_FC=no
;;
sysv4)
case $host_vendor in
sni)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes # is this really true???
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct_FC=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_F77='$CC -r -o $output$reload_objs'
- hardcode_direct_F77=no
+ archive_cmds_FC='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds_FC='$CC -r -o $output$reload_objs'
+ hardcode_direct_FC=no
;;
motorola)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct_FC=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_F77=no
+ hardcode_shlibpath_var_FC=no
;;
sysv4.3*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- export_dynamic_flag_spec_F77='-Bexport'
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var_FC=no
+ export_dynamic_flag_spec_FC='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var_FC=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
- ld_shlibs_F77=yes
+ ld_shlibs_FC=yes
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
- no_undefined_flag_F77='${wl}-z,text'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_FC='${wl}-z,text'
+ archive_cmds_need_lc_FC=no
+ hardcode_shlibpath_var_FC=no
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -18138,51 +19886,66 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag_F77='${wl}-z,text'
- allow_undefined_flag_F77='${wl}-z,nodefs'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
- export_dynamic_flag_spec_F77='${wl}-Bexport'
+ no_undefined_flag_FC='${wl}-z,text'
+ allow_undefined_flag_FC='${wl}-z,nodefs'
+ archive_cmds_need_lc_FC=no
+ hardcode_shlibpath_var_FC=no
+ hardcode_libdir_flag_spec_FC='${wl}-R,$libdir'
+ hardcode_libdir_separator_FC=':'
+ link_all_deplibs_FC=yes
+ export_dynamic_flag_spec_FC='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
+ archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec_FC='-L$libdir'
+ hardcode_shlibpath_var_FC=no
;;
*)
- ld_shlibs_F77=no
+ ld_shlibs_FC=no
;;
esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec_FC='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
fi
-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
+{ echo "$as_me:$LINENO: result: $ld_shlibs_FC" >&5
+echo "${ECHO_T}$ld_shlibs_FC" >&6; }
+test "$ld_shlibs_FC" = no && can_build_shared=no
+
+with_gnu_ld_FC=$with_gnu_ld
+
+
+
+
+
#
# Do we need to explicitly link libc?
#
-case "x$archive_cmds_need_lc_F77" in
+case "x$archive_cmds_need_lc_FC" in
x|xyes)
# Assume -lc should be added
- archive_cmds_need_lc_F77=yes
+ archive_cmds_need_lc_FC=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_F77 in
+ case $archive_cmds_FC in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
@@ -18192,8 +19955,8 @@ x|xyes)
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -18204,2646 +19967,104 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
- wl=$lt_prog_compiler_wl_F77
- pic_flag=$lt_prog_compiler_pic_F77
+ wl=$lt_prog_compiler_wl_FC
+ pic_flag=$lt_prog_compiler_pic_FC
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_F77
- allow_undefined_flag_F77=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ lt_save_allow_undefined_flag=$allow_undefined_flag_FC
+ allow_undefined_flag_FC=
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
then
- archive_cmds_need_lc_F77=no
+ archive_cmds_need_lc_FC=no
else
- archive_cmds_need_lc_F77=yes
+ archive_cmds_need_lc_FC=yes
fi
- allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+ allow_undefined_flag_FC=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
+ $RM conftest*
+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_FC" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_FC" >&6; }
;;
esac
fi
;;
esac
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-freebsd1*)
- dynamic_linker=no
- ;;
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-# This must be Linux ELF.
-linux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
- test -n "$runpath_var_F77" || \
- test "X$hardcode_automatic_F77" = "Xyes" ; then
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_F77" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
- test "$hardcode_minus_L_F77" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_F77=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_F77=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_F77=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6; }
-if test "$hardcode_action_F77" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_F77 \
- CC_F77 \
- LD_F77 \
- lt_prog_compiler_wl_F77 \
- lt_prog_compiler_pic_F77 \
- lt_prog_compiler_static_F77 \
- lt_prog_compiler_no_builtin_flag_F77 \
- export_dynamic_flag_spec_F77 \
- thread_safe_flag_spec_F77 \
- whole_archive_flag_spec_F77 \
- enable_shared_with_static_runtimes_F77 \
- old_archive_cmds_F77 \
- old_archive_from_new_cmds_F77 \
- predep_objects_F77 \
- postdep_objects_F77 \
- predeps_F77 \
- postdeps_F77 \
- compiler_lib_search_path_F77 \
- archive_cmds_F77 \
- archive_expsym_cmds_F77 \
- postinstall_cmds_F77 \
- postuninstall_cmds_F77 \
- old_archive_from_expsyms_cmds_F77 \
- allow_undefined_flag_F77 \
- no_undefined_flag_F77 \
- export_symbols_cmds_F77 \
- hardcode_libdir_flag_spec_F77 \
- hardcode_libdir_flag_spec_ld_F77 \
- hardcode_libdir_separator_F77 \
- hardcode_automatic_F77 \
- module_cmds_F77 \
- module_expsym_cmds_F77 \
- lt_cv_prog_compiler_c_o_F77 \
- exclude_expsyms_F77 \
- include_expsyms_F77; do
-
- case $var in
- old_archive_cmds_F77 | \
- old_archive_from_new_cmds_F77 | \
- archive_cmds_F77 | \
- archive_expsym_cmds_F77 | \
- module_cmds_F77 | \
- module_expsym_cmds_F77 | \
- old_archive_from_expsyms_cmds_F77 | \
- export_symbols_cmds_F77 | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-cfgfile="$ofile"
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-# A C compiler.
-LTCC=$lt_LTCC
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-# A language-specific compiler.
-CC=$lt_compiler_F77
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-# An ERE matcher.
-EGREP=$lt_EGREP
-# The linker used to build libraries.
-LD=$lt_LD_F77
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-# A BSD-compatible nm program.
-NM=$lt_NM
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-# Used on cygwin: assembler.
-AS="$AS"
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19384: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:19388: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_static_GCJ='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_GCJ='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_GCJ=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_GCJ=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- else
- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_GCJ='-qnocommon'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- linux*)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-fpic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_GCJ='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_GCJ='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_GCJ='-Qoption ld '
- lt_prog_compiler_pic_GCJ='-PIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_GCJ='-Kconform_pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_GCJ='-pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_GCJ=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19652: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:19656: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_GCJ=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
- case $lt_prog_compiler_pic_GCJ in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
- esac
-else
- lt_prog_compiler_pic_GCJ=
- lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_GCJ=
- ;;
- *)
- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_GCJ=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_GCJ=yes
- fi
- else
- lt_prog_compiler_static_works_GCJ=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
- :
-else
- lt_prog_compiler_static_GCJ=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_GCJ=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19756: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:19760: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_GCJ=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag_GCJ=
- enable_shared_with_static_runtimes_GCJ=no
- archive_cmds_GCJ=
- archive_expsym_cmds_GCJ=
- old_archive_From_new_cmds_GCJ=
- old_archive_from_expsyms_cmds_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- thread_safe_flag_spec_GCJ=
- hardcode_libdir_flag_spec_GCJ=
- hardcode_libdir_flag_spec_ld_GCJ=
- hardcode_libdir_separator_GCJ=
- hardcode_direct_GCJ=no
- hardcode_minus_L_GCJ=no
- hardcode_shlibpath_var_GCJ=unsupported
- link_all_deplibs_GCJ=unknown
- hardcode_automatic_GCJ=no
- module_cmds_GCJ=
- module_expsym_cmds_GCJ=
- always_export_symbols_GCJ=no
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_GCJ=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_GCJ=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_GCJ=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_GCJ=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_GCJ=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=no
- enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- interix3*)
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_GCJ=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_GCJ" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=yes
- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_GCJ=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_GCJ=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_GCJ=''
- hardcode_direct_GCJ=yes
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct_GCJ=yes
- else
- # We have old collect2
- hardcode_direct_GCJ=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_libdir_separator_GCJ=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_GCJ=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_GCJ='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#ifdef FC_DUMMY_MAIN
-#ifndef FC_DUMMY_MAIN_EQ_F77
-# ifdef __cplusplus
- extern "C"
-# endif
- int FC_DUMMY_MAIN() { return 1; }
-#endif
-#endif
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_GCJ="-z nodefs"
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#ifdef FC_DUMMY_MAIN
-#ifndef FC_DUMMY_MAIN_EQ_F77
-# ifdef __cplusplus
- extern "C"
-# endif
- int FC_DUMMY_MAIN() { return 1; }
-#endif
-#endif
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_GCJ=' ${wl}-bernotok'
- allow_undefined_flag_GCJ=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_GCJ='$convenience'
- archive_cmds_need_lc_GCJ=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_GCJ=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_GCJ=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ=' '
- allow_undefined_flag_GCJ=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_GCJ='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_GCJ=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_GCJ=no
- hardcode_direct_GCJ=no
- hardcode_automatic_GCJ=yes
- hardcode_shlibpath_var_GCJ=unsupported
- whole_archive_flag_spec_GCJ=''
- link_all_deplibs_GCJ=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- freebsd1*)
- ld_shlibs_GCJ=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu | dragonfly*)
- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_direct_GCJ=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- ;;
- *)
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- link_all_deplibs_GCJ=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- newsos6)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- openbsd*)
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- allow_undefined_flag_GCJ=unsupported
- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_separator_GCJ=:
- ;;
-
- solaris*)
- no_undefined_flag_GCJ=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_shlibpath_var_GCJ=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
- esac
- link_all_deplibs_GCJ=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_GCJ='$CC -r -o $output$reload_objs'
- hardcode_direct_GCJ=no
- ;;
- motorola)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4.3*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- export_dynamic_flag_spec_GCJ='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_GCJ=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
- no_undefined_flag_GCJ='${wl}-z,text'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_GCJ='${wl}-z,text'
- allow_undefined_flag_GCJ='${wl}-z,nodefs'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_GCJ=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_GCJ in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_GCJ
- pic_flag=$lt_prog_compiler_pic_GCJ
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
- allow_undefined_flag_GCJ=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_GCJ=no
- else
- archive_cmds_need_lc_GCJ=yes
- fi
- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -20857,20 +20078,6 @@ shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -20888,7 +20095,7 @@ aix3*)
soname_spec='${libname}${release}${shared_ext}$major'
;;
-aix4* | aix5*)
+aix[4-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -20907,7 +20114,7 @@ aix4* | aix5*)
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -20933,9 +20140,18 @@ aix4* | aix5*)
;;
amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
;;
beos*)
@@ -20969,14 +20185,17 @@ cygwin* | mingw* | pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
- $rm \$dlpath'
+ $RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
@@ -20988,17 +20207,17 @@ cygwin* | mingw* | pw32*)
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
@@ -21022,17 +20241,12 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
+
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -21049,18 +20263,6 @@ freebsd1*)
dynamic_linker=no
;;
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -21098,7 +20300,7 @@ freebsd* | dragonfly*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- freebsd*) # from 4.6 on
+ *) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -21137,18 +20339,18 @@ hpux9* | hpux10* | hpux11*)
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
@@ -21161,7 +20363,7 @@ hpux9* | hpux10* | hpux11*)
postinstall_cmds='chmod 555 $lib'
;;
-interix3*)
+interix[3-9]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -21216,7 +20418,7 @@ linux*oldld* | linux*aout* | linux*coff*)
;;
# This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -21225,6 +20427,50 @@ linux*)
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\""
+ cat >conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_fc_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+ shlibpath_overrides_runpath=yes
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -21232,7 +20478,7 @@ linux*)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -21245,23 +20491,11 @@ linux*)
dynamic_linker='GNU/Linux ld.so'
;;
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -21282,14 +20516,16 @@ newsos6)
shlibpath_overrides_runpath=yes
;;
-nto-qnx*)
- version_type=linux
+*nto* | *qnx*)
+ version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
;;
openbsd*)
@@ -21298,13 +20534,13 @@ openbsd*)
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
esac
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
@@ -21338,6 +20574,10 @@ osf3* | osf4* | osf5*)
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+rdos*)
+ dynamic_linker=no
+ ;;
+
solaris*)
version_type=linux
need_lib_prefix=no
@@ -21372,7 +20612,6 @@ sysv4 | sysv4.3*)
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -21403,13 +20642,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test "$with_gnu_ld" = yes; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -21419,6 +20657,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
sys_lib_dlsearch_path_spec='/usr/lib'
;;
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -21439,931 +20688,97 @@ if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
- test -n "$runpath_var_GCJ" || \
- test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_GCJ" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
- test "$hardcode_minus_L_GCJ" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_GCJ=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_GCJ=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_GCJ=unsupported
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
fi
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_GCJ \
- CC_GCJ \
- LD_GCJ \
- lt_prog_compiler_wl_GCJ \
- lt_prog_compiler_pic_GCJ \
- lt_prog_compiler_static_GCJ \
- lt_prog_compiler_no_builtin_flag_GCJ \
- export_dynamic_flag_spec_GCJ \
- thread_safe_flag_spec_GCJ \
- whole_archive_flag_spec_GCJ \
- enable_shared_with_static_runtimes_GCJ \
- old_archive_cmds_GCJ \
- old_archive_from_new_cmds_GCJ \
- predep_objects_GCJ \
- postdep_objects_GCJ \
- predeps_GCJ \
- postdeps_GCJ \
- compiler_lib_search_path_GCJ \
- archive_cmds_GCJ \
- archive_expsym_cmds_GCJ \
- postinstall_cmds_GCJ \
- postuninstall_cmds_GCJ \
- old_archive_from_expsyms_cmds_GCJ \
- allow_undefined_flag_GCJ \
- no_undefined_flag_GCJ \
- export_symbols_cmds_GCJ \
- hardcode_libdir_flag_spec_GCJ \
- hardcode_libdir_flag_spec_ld_GCJ \
- hardcode_libdir_separator_GCJ \
- hardcode_automatic_GCJ \
- module_cmds_GCJ \
- module_expsym_cmds_GCJ \
- lt_cv_prog_compiler_c_o_GCJ \
- exclude_expsyms_GCJ \
- include_expsyms_GCJ; do
-
- case $var in
- old_archive_cmds_GCJ | \
- old_archive_from_new_cmds_GCJ | \
- archive_cmds_GCJ | \
- archive_expsym_cmds_GCJ | \
- module_cmds_GCJ | \
- module_expsym_cmds_GCJ | \
- old_archive_from_expsyms_cmds_GCJ | \
- export_symbols_cmds_GCJ | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-# Do we need a version for libraries?
-need_version=$need_version
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
+ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+hardcode_action_FC=
+if test -n "$hardcode_libdir_flag_spec_FC" ||
+ test -n "$runpath_var_FC" ||
+ test "X$hardcode_automatic_FC" = "Xyes" ; then
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_FC" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no &&
+ test "$hardcode_minus_L_FC" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_FC=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_FC=immediate
fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_FC=unsupported
fi
+{ echo "$as_me:$LINENO: result: $hardcode_action_FC" >&5
+echo "${ECHO_T}$hardcode_action_FC" >&6; }
+if test "$hardcode_action_FC" = relink ||
+ test "$inherit_rpath_FC" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_RC \
- CC_RC \
- LD_RC \
- lt_prog_compiler_wl_RC \
- lt_prog_compiler_pic_RC \
- lt_prog_compiler_static_RC \
- lt_prog_compiler_no_builtin_flag_RC \
- export_dynamic_flag_spec_RC \
- thread_safe_flag_spec_RC \
- whole_archive_flag_spec_RC \
- enable_shared_with_static_runtimes_RC \
- old_archive_cmds_RC \
- old_archive_from_new_cmds_RC \
- predep_objects_RC \
- postdep_objects_RC \
- predeps_RC \
- postdeps_RC \
- compiler_lib_search_path_RC \
- archive_cmds_RC \
- archive_expsym_cmds_RC \
- postinstall_cmds_RC \
- postuninstall_cmds_RC \
- old_archive_from_expsyms_cmds_RC \
- allow_undefined_flag_RC \
- no_undefined_flag_RC \
- export_symbols_cmds_RC \
- hardcode_libdir_flag_spec_RC \
- hardcode_libdir_flag_spec_ld_RC \
- hardcode_libdir_separator_RC \
- hardcode_automatic_RC \
- module_cmds_RC \
- module_expsym_cmds_RC \
- lt_cv_prog_compiler_c_o_RC \
- exclude_expsyms_RC \
- include_expsyms_RC; do
-
- case $var in
- old_archive_cmds_RC | \
- old_archive_from_new_cmds_RC | \
- archive_cmds_RC | \
- archive_expsym_cmds_RC | \
- module_cmds_RC | \
- module_expsym_cmds_RC | \
- old_archive_from_expsyms_cmds_RC | \
- export_symbols_cmds_RC | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-# ### END LIBTOOL TAG CONFIG: $tagname
-__EOF__
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
+ fi # test -n "$compiler"
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -22371,52 +20786,6 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
-
- ;;
-
- *)
- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
@@ -22425,10 +20794,12 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+ ac_config_commands="$ac_config_commands libtool"
+# Only expand once:
@@ -51921,30 +50292,6 @@ else
BYTESEX="little-endian"
fi
-
-if (./libtool --features | grep '^enable shared libraries' > /dev/null); then
- enable_shared=yes
-else
- enable_shared=no
-fi
-
-if (./libtool --features | grep '^enable static libraries' > /dev/null); then
- enable_static=yes
-else
- enable_static=no
-fi
-
-if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then
- STATIC_SHARED="static, shared"
-elif test "X$enable_static" = "Xyes"; then
- STATIC_SHARED="static"
-elif test "X$enable_shared" = "Xyes"; then
- STATIC_SHARED="shared"
-else
- STATIC_SHARED="none"
-fi
-
-
PARALLEL=${PARALLEL:-no}
@@ -52370,6 +50717,13 @@ echo "$as_me: error: conditional \"CXX_SHARED_CONDITIONAL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
if test -z "${DIRECT_VFD_CONDITIONAL_TRUE}" && test -z "${DIRECT_VFD_CONDITIONAL_FALSE}"; then
{ { echo "$as_me:$LINENO: error: conditional \"DIRECT_VFD_CONDITIONAL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
@@ -52872,6 +51226,433 @@ cat >>$CONFIG_STATUS <<_ACEOF
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+LD_FC='`$ECHO "X$LD_FC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_FC='`$ECHO "X$old_archive_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_FC='`$ECHO "X$compiler_FC" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_FC='`$ECHO "X$GCC_FC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_FC='`$ECHO "X$lt_prog_compiler_no_builtin_flag_FC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_FC='`$ECHO "X$lt_prog_compiler_wl_FC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_FC='`$ECHO "X$lt_prog_compiler_pic_FC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_FC='`$ECHO "X$lt_prog_compiler_static_FC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_FC='`$ECHO "X$lt_cv_prog_compiler_c_o_FC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_FC='`$ECHO "X$archive_cmds_need_lc_FC" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_FC='`$ECHO "X$enable_shared_with_static_runtimes_FC" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_FC='`$ECHO "X$export_dynamic_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_FC='`$ECHO "X$whole_archive_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_FC='`$ECHO "X$compiler_needs_object_FC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_FC='`$ECHO "X$old_archive_from_new_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_FC='`$ECHO "X$old_archive_from_expsyms_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_FC='`$ECHO "X$archive_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_FC='`$ECHO "X$archive_expsym_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_FC='`$ECHO "X$module_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_FC='`$ECHO "X$module_expsym_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_FC='`$ECHO "X$with_gnu_ld_FC" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_FC='`$ECHO "X$allow_undefined_flag_FC" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_FC='`$ECHO "X$no_undefined_flag_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_FC='`$ECHO "X$hardcode_libdir_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_FC='`$ECHO "X$hardcode_libdir_flag_spec_ld_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_FC='`$ECHO "X$hardcode_libdir_separator_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_FC='`$ECHO "X$hardcode_direct_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_FC='`$ECHO "X$hardcode_direct_absolute_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_FC='`$ECHO "X$hardcode_minus_L_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_FC='`$ECHO "X$hardcode_shlibpath_var_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_FC='`$ECHO "X$hardcode_automatic_FC" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_FC='`$ECHO "X$inherit_rpath_FC" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_FC='`$ECHO "X$link_all_deplibs_FC" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_FC='`$ECHO "X$fix_srcfile_path_FC" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_FC='`$ECHO "X$always_export_symbols_FC" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_FC='`$ECHO "X$export_symbols_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_FC='`$ECHO "X$exclude_expsyms_FC" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_FC='`$ECHO "X$include_expsyms_FC" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_FC='`$ECHO "X$prelink_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_FC='`$ECHO "X$file_list_spec_FC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_FC='`$ECHO "X$hardcode_action_FC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_FC='`$ECHO "X$compiler_lib_search_dirs_FC" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects_FC='`$ECHO "X$predep_objects_FC" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects_FC='`$ECHO "X$postdep_objects_FC" | $Xsed -e "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predeps_FC='`$ECHO "X$predeps_FC" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps_FC='`$ECHO "X$postdeps_FC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path_FC='`$ECHO "X$compiler_lib_search_path_FC" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+LD_FC \
+compiler_CXX \
+compiler_FC \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_no_builtin_flag_FC \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_wl_FC \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_pic_FC \
+lt_prog_compiler_static_CXX \
+lt_prog_compiler_static_FC \
+lt_cv_prog_compiler_c_o_CXX \
+lt_cv_prog_compiler_c_o_FC \
+export_dynamic_flag_spec_CXX \
+export_dynamic_flag_spec_FC \
+whole_archive_flag_spec_CXX \
+whole_archive_flag_spec_FC \
+compiler_needs_object_CXX \
+compiler_needs_object_FC \
+with_gnu_ld_CXX \
+with_gnu_ld_FC \
+allow_undefined_flag_CXX \
+allow_undefined_flag_FC \
+no_undefined_flag_CXX \
+no_undefined_flag_FC \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_FC \
+hardcode_libdir_flag_spec_ld_CXX \
+hardcode_libdir_flag_spec_ld_FC \
+hardcode_libdir_separator_CXX \
+hardcode_libdir_separator_FC \
+fix_srcfile_path_CXX \
+fix_srcfile_path_FC \
+exclude_expsyms_CXX \
+exclude_expsyms_FC \
+include_expsyms_CXX \
+include_expsyms_FC \
+file_list_spec_CXX \
+file_list_spec_FC \
+compiler_lib_search_dirs_CXX \
+compiler_lib_search_dirs_FC \
+predep_objects_CXX \
+predep_objects_FC \
+postdep_objects_CXX \
+postdep_objects_FC \
+predeps_CXX \
+predeps_FC \
+postdeps_CXX \
+postdeps_FC \
+compiler_lib_search_path_CXX \
+compiler_lib_search_path_FC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+old_archive_cmds_CXX \
+old_archive_cmds_FC \
+old_archive_from_new_cmds_CXX \
+old_archive_from_new_cmds_FC \
+old_archive_from_expsyms_cmds_CXX \
+old_archive_from_expsyms_cmds_FC \
+archive_cmds_CXX \
+archive_cmds_FC \
+archive_expsym_cmds_CXX \
+archive_expsym_cmds_FC \
+module_cmds_CXX \
+module_cmds_FC \
+module_expsym_cmds_CXX \
+module_expsym_cmds_FC \
+export_symbols_cmds_CXX \
+export_symbols_cmds_FC \
+prelink_cmds_CXX \
+prelink_cmds_FC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+ ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+
+
+
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -52883,6 +51664,7 @@ do
"src/H5config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/H5config.h" ;;
"default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"src/libhdf5.settings") CONFIG_FILES="$CONFIG_FILES src/libhdf5.settings" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
@@ -53171,16 +51953,21 @@ FORTRAN_SHARED_CONDITIONAL_TRUE!$FORTRAN_SHARED_CONDITIONAL_TRUE$ac_delim
FORTRAN_SHARED_CONDITIONAL_FALSE!$FORTRAN_SHARED_CONDITIONAL_FALSE$ac_delim
CXX_SHARED_CONDITIONAL_TRUE!$CXX_SHARED_CONDITIONAL_TRUE$ac_delim
CXX_SHARED_CONDITIONAL_FALSE!$CXX_SHARED_CONDITIONAL_FALSE$ac_delim
+LIBTOOL!$LIBTOOL$ac_delim
+SED!$SED$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
+FGREP!$FGREP$ac_delim
+LD!$LD$ac_delim
+DUMPBIN!$DUMPBIN$ac_delim
+ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
+NM!$NM$ac_delim
LN_S!$LN_S$ac_delim
-ECHO!$ECHO$ac_delim
RANLIB!$RANLIB$ac_delim
+lt_ECHO!$lt_ECHO$ac_delim
+DSYMUTIL!$DSYMUTIL$ac_delim
+NMEDIT!$NMEDIT$ac_delim
CPP!$CPP$ac_delim
-F77!$F77$ac_delim
-FFLAGS!$FFLAGS$ac_delim
-ac_ct_F77!$ac_ct_F77$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
AM_MAKEFLAGS!$AM_MAKEFLAGS$ac_delim
USE_FILTER_DEFLATE!$USE_FILTER_DEFLATE$ac_delim
USE_FILTER_SZIP!$USE_FILTER_SZIP$ac_delim
@@ -53206,7 +51993,6 @@ CONFIG_DATE!$CONFIG_DATE$ac_delim
CONFIG_USER!$CONFIG_USER$ac_delim
CONFIG_MODE!$CONFIG_MODE$ac_delim
BYTESEX!$BYTESEX$ac_delim
-STATIC_SHARED!$STATIC_SHARED$ac_delim
CC_VERSION!$CC_VERSION$ac_delim
ROOT!$ROOT$ac_delim
DYNAMIC_DIRS!$DYNAMIC_DIRS$ac_delim
@@ -53231,7 +52017,7 @@ LIBOBJS!$LIBOBJS$ac_delim
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 90; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 94; then
break
elif $ac_last_try; then
{ { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -53632,21 +52418,22 @@ echo "$as_me: $ac_file is unchanged" >&6;}
fi
rm -f "$tmp/out12"
# Compute $ac_file's index in $config_headers.
+_am_arg=$ac_file
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $ac_file | $ac_file:* )
+ $_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -53696,7 +52483,7 @@ echo "$as_me: executing $ac_file commands" >&6;}
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
@@ -53810,6 +52597,929 @@ echo "$as_me: error: cannot create directory $as_dir" >&2;}
done
done
;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="CXX FC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1+=\$2"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1=\$$1\$2"
+}
+_LT_EOF
+ ;;
+ esac
+
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: FC
+
+# The linker used to build libraries.
+LD=$lt_LD_FC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_FC
+
+# A language specific compiler.
+CC=$lt_compiler_FC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_FC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_FC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_FC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_FC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_FC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_FC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_FC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_FC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_FC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_FC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_FC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_FC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_FC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_FC
+archive_expsym_cmds=$lt_archive_expsym_cmds_FC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_FC
+module_expsym_cmds=$lt_module_expsym_cmds_FC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_FC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_FC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_FC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_FC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_FC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_FC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_FC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_FC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_FC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_FC
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_FC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_FC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_FC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_FC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_FC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_FC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_FC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_FC
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_FC
+postdep_objects=$lt_postdep_objects_FC
+predeps=$lt_predeps_FC
+postdeps=$lt_postdeps_FC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_FC
+
+# ### END LIBTOOL TAG CONFIG: FC
+_LT_EOF
+
+ ;;
esac
done # for ac_tag
@@ -53850,6 +53560,29 @@ touch ./config/stamp2
# Finally the makefiles
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+if (./libtool --features | grep '^enable shared libraries' > /dev/null); then
+ enable_shared=yes
+else
+ enable_shared=no
+fi
+
+if (./libtool --features | grep '^enable static libraries' > /dev/null); then
+ enable_static=yes
+else
+ enable_static=no
+fi
+
+if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then
+ STATIC_SHARED="static, shared"
+elif test "X$enable_static" = "Xyes"; then
+ STATIC_SHARED="static"
+elif test "X$enable_shared" = "Xyes"; then
+ STATIC_SHARED="shared"
+else
+ STATIC_SHARED="none"
+fi
+
chmod 755 tools/misc/h5cc
if test "X$HDF_FORTRAN" = "Xyes"; then