summaryrefslogtreecommitdiffstats
path: root/doc/html
diff options
context:
space:
mode:
Diffstat (limited to 'doc/html')
-rw-r--r--doc/html/ADGuide/Makefile.in19
-rw-r--r--doc/html/Graphics/Makefile.in19
-rw-r--r--doc/html/Intro/Makefile.in19
-rw-r--r--doc/html/Makefile.in19
-rw-r--r--doc/html/PSandPDF/Makefile.in19
-rw-r--r--doc/html/TechNotes/Makefile.in19
-rw-r--r--doc/html/Tutor/Graphics/Makefile.in19
-rw-r--r--doc/html/Tutor/Makefile.in19
-rw-r--r--doc/html/Tutor/examples/Makefile.in19
-rw-r--r--doc/html/cpplus/Makefile.in19
-rw-r--r--doc/html/ed_libs/Makefile.in19
-rw-r--r--doc/html/ed_styles/Makefile.in19
-rw-r--r--doc/html/fortran/Makefile.in19
13 files changed, 182 insertions, 65 deletions
diff --git a/doc/html/ADGuide/Makefile.in b/doc/html/ADGuide/Makefile.in
index e3edc95..e5e420b 100644
--- a/doc/html/ADGuide/Makefile.in
+++ b/doc/html/ADGuide/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Graphics/Makefile.in b/doc/html/Graphics/Makefile.in
index 3a548d2..517ad92 100644
--- a/doc/html/Graphics/Makefile.in
+++ b/doc/html/Graphics/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Intro/Makefile.in b/doc/html/Intro/Makefile.in
index af08d52..443f684 100644
--- a/doc/html/Intro/Makefile.in
+++ b/doc/html/Intro/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Makefile.in b/doc/html/Makefile.in
index cf8cde3..0fcba17 100644
--- a/doc/html/Makefile.in
+++ b/doc/html/Makefile.in
@@ -81,18 +81,18 @@ CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -263,6 +263,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in
index a6d735b..7598150 100644
--- a/doc/html/PSandPDF/Makefile.in
+++ b/doc/html/PSandPDF/Makefile.in
@@ -58,18 +58,18 @@ SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -240,6 +240,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/TechNotes/Makefile.in b/doc/html/TechNotes/Makefile.in
index c0f8d70..d2e39aa 100644
--- a/doc/html/TechNotes/Makefile.in
+++ b/doc/html/TechNotes/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Tutor/Graphics/Makefile.in b/doc/html/Tutor/Graphics/Makefile.in
index 5924da9..175a306 100644
--- a/doc/html/Tutor/Graphics/Makefile.in
+++ b/doc/html/Tutor/Graphics/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Tutor/Makefile.in b/doc/html/Tutor/Makefile.in
index 01aea64..4651d98 100644
--- a/doc/html/Tutor/Makefile.in
+++ b/doc/html/Tutor/Makefile.in
@@ -77,18 +77,18 @@ CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -259,6 +259,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/Tutor/examples/Makefile.in b/doc/html/Tutor/examples/Makefile.in
index 10c862e..0bac380 100644
--- a/doc/html/Tutor/examples/Makefile.in
+++ b/doc/html/Tutor/examples/Makefile.in
@@ -70,18 +70,18 @@ nobase_localdocDATA_INSTALL = $(install_sh_DATA)
DATA = $(localdoc_DATA) $(nobase_localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -252,6 +252,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/cpplus/Makefile.in b/doc/html/cpplus/Makefile.in
index ed2276b..1c2ca46 100644
--- a/doc/html/cpplus/Makefile.in
+++ b/doc/html/cpplus/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/ed_libs/Makefile.in b/doc/html/ed_libs/Makefile.in
index 6753a2b..afaf977 100644
--- a/doc/html/ed_libs/Makefile.in
+++ b/doc/html/ed_libs/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/ed_styles/Makefile.in b/doc/html/ed_styles/Makefile.in
index 866e55b..3f05041 100644
--- a/doc/html/ed_styles/Makefile.in
+++ b/doc/html/ed_styles/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
diff --git a/doc/html/fortran/Makefile.in b/doc/html/fortran/Makefile.in
index 48364ab..31b93d9 100644
--- a/doc/html/fortran/Makefile.in
+++ b/doc/html/fortran/Makefile.in
@@ -68,18 +68,18 @@ localdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(localdoc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Set the paths for autotools to be correct on heping.
+# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
-ACLOCAL = /usr/bin/aclocal
+ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
-AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
-AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
-AUTOMAKE = /usr/bin/automake
+AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
+AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
+AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
@@ -250,6 +250,15 @@ target_alias = @target_alias@
RM = rm -f
CP = cp
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command. Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la