diff options
Diffstat (limited to 'doc')
41 files changed, 6717 insertions, 306 deletions
diff --git a/doc/Makefile.am b/doc/Makefile.am new file mode 100644 index 0000000..722ad03 --- /dev/null +++ b/doc/Makefile.am @@ -0,0 +1,23 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# +# This is the top level makefile of the Doc directory. It mostly just +# reinvokes make in the various subdirectories. +# You can alternatively invoke make from each subdirectory manually. +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +# Add doc-specific include +include $(top_srcdir)/config/commence-doc.am + +# Subdirectories in build-order +SUBDIRS=html + +# Don't include conclude, since the docs directory doesn't need to know how to +# build anything. diff --git a/doc/Makefile.in b/doc/Makefile.in index 8a56e2e..06f7335 100644 --- a/doc/Makefile.in +++ b/doc/Makefile.in @@ -1,3 +1,19 @@ +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + # HDF5 Library Doc Makefile(.in) # # Copyright (C) 1997, 2002 @@ -9,56 +25,521 @@ # reinvokes make in the various subdirectories. # You can alternatively invoke make from each subdirectory manually. # -top_srcdir=@top_srcdir@ -top_builddir=.. -srcdir=@srcdir@ -@COMMENCE@ + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +# Add doc-specific include # Subdirectories in build-order -SUBDIRS=html +SUBDIRS = html +subdir = doc +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = -##=========================================================================== -lib progs check test _test install uninstall: - @echo "Nothing to be done" +RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ + uninstall-info-recursive all-recursive install-data-recursive \ + install-exec-recursive installdirs-recursive install-recursive \ + uninstall-recursive check-recursive installcheck-recursive +DIST_COMMON = Makefile.am Makefile.in +DIST_SUBDIRS = $(SUBDIRS) +all: all-recursive -tests TAGS dep depend: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -install-doc: - @if test -d $(DOCDIR) ; then \ - :; \ - else \ - mkdir $(DOCDIR) && chmod 755 $(DOCDIR); \ - fi - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +mostlyclean-libtool: + -rm -f *.lo -uninstall-doc: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: -.PHONY: all lib progs test _test install uninstall dep depend clean \ - mostlyclean distclean maintainer-clean +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" -clean mostlyclean: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -distclean: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +ETAGS = etags +ETAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ done - -$(RM) Makefile +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: + +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: -maintainer-clean: distclean - @echo "This target is intended for maintainers to use;" +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ + clean-generic clean-libtool clean-recursive distclean \ + distclean-generic distclean-libtool distclean-recursive \ + distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ + info-recursive install install-am install-data install-data-am \ + install-data-recursive install-exec install-exec-am \ + install-exec-recursive install-info install-info-am \ + install-info-recursive install-man install-recursive \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am installdirs-recursive maintainer-clean \ + maintainer-clean-generic maintainer-clean-recursive mostlyclean \ + mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ + tags tags-recursive uninstall uninstall-am uninstall-info-am \ + uninstall-info-recursive uninstall-recursive + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; done +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall + +# Don't include conclude, since the docs directory doesn't need to know how to +# build anything. +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/ADGuide/Dependencies b/doc/html/ADGuide/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/ADGuide/Dependencies +++ /dev/null diff --git a/doc/html/ADGuide/Makefile.am b/doc/html/ADGuide/Makefile.am new file mode 100644 index 0000000..fde4097 --- /dev/null +++ b/doc/html/ADGuide/Makefile.am @@ -0,0 +1,18 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/ADGuide + +# Public doc files (to be installed)... +localdoc_DATA=Changes.html H4toH5Mapping.pdf HISTORY.txt ImageSpec.html \ + PaletteExample1.gif Palettes.fm.anc.gif RELEASE.txt diff --git a/doc/html/ADGuide/Makefile.in b/doc/html/ADGuide/Makefile.in index 3392543..1df5341 100644 --- a/doc/html/ADGuide/Makefile.in +++ b/doc/html/ADGuide/Makefile.in @@ -1,27 +1,441 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/ADGuide +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ -# Temporary files -MOSTLYCLEAN= +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/ADGuide # Public doc files (to be installed)... -PUB_DOCS=Changes.html H4toH5Mapping.pdf HISTORY.txt ImageSpec.html \ +localdoc_DATA = Changes.html H4toH5Mapping.pdf HISTORY.txt ImageSpec.html \ PaletteExample1.gif Palettes.fm.anc.gif RELEASE.txt -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/ADGuide +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/ADGuide/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Dependencies b/doc/html/Dependencies deleted file mode 100644 index f29a269..0000000 --- a/doc/html/Dependencies +++ /dev/null @@ -1,3 +0,0 @@ -## This file is machine generated on GNU systems. -## Only temporary changes may be made here. - diff --git a/doc/html/Graphics/Dependencies b/doc/html/Graphics/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/Graphics/Dependencies +++ /dev/null diff --git a/doc/html/Graphics/Makefile.am b/doc/html/Graphics/Makefile.am new file mode 100644 index 0000000..3e65c67 --- /dev/null +++ b/doc/html/Graphics/Makefile.am @@ -0,0 +1,17 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir=$(docdir)/hdf5/Graphics + +# Public doc files (to be installed)... +localdoc_DATA=C++.gif FORTRAN.gif Java.gif OtherAPIs.gif diff --git a/doc/html/Graphics/Makefile.in b/doc/html/Graphics/Makefile.in index 7521d01..e509a2d 100644 --- a/doc/html/Graphics/Makefile.in +++ b/doc/html/Graphics/Makefile.in @@ -1,28 +1,439 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/Graphics +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ -TRACE=perl $(top_srcdir)/bin/trace +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ -# Temporary files -MOSTLYCLEAN= +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/Graphics # Public doc files (to be installed)... -PUB_DOCS=C++.gif FORTRAN.gif Java.gif OtherAPIs.gif +localdoc_DATA = C++.gif FORTRAN.gif Java.gif OtherAPIs.gif +subdir = doc/html/Graphics +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Graphics/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" -# Other doc files (not to be installed)... -PRIVATE_DOCS= +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Intro/Dependencies b/doc/html/Intro/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/Intro/Dependencies +++ /dev/null diff --git a/doc/html/Intro/Makefile.am b/doc/html/Intro/Makefile.am new file mode 100644 index 0000000..0cbc3a6 --- /dev/null +++ b/doc/html/Intro/Makefile.am @@ -0,0 +1,17 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir=$(docdir)/hdf5/Intro + +# Public doc files (to be installed)... +localdoc_DATA=IntroExamples.html diff --git a/doc/html/Intro/Makefile.in b/doc/html/Intro/Makefile.in index becee33..e2c002c 100644 --- a/doc/html/Intro/Makefile.in +++ b/doc/html/Intro/Makefile.in @@ -1,23 +1,439 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ -# Subdirectories in build-order -SUBDIRS= -DOCDIR=$(docdir)/hdf5/Intro +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/Intro # Public doc files (to be installed)... -PUB_DOCS=IntroExamples.html +localdoc_DATA = IntroExamples.html +subdir = doc/html/Intro +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Intro/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" -# Other doc files (not to be installed)... -PRIVATE_DOCS= +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Makefile.am b/doc/html/Makefile.am new file mode 100644 index 0000000..2d89255 --- /dev/null +++ b/doc/html/Makefile.am @@ -0,0 +1,43 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# +# This is the top level makefile of the Doc directory. It mostly just +# reinvokes make in the various subdirectories. +# You can alternatively invoke make from each subdirectory manually. +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir=$(docdir)/hdf5 + +# Subdirectories in build-order +SUBDIRS=ADGuide Graphics Intro PSandPDF TechNotes Tutor \ + cpplus ed_libs ed_styles fortran + +# Public doc files (to be installed)... +localdoc_DATA=ADGuide.html Attributes.html Big.html Caching.html Chunk_f1.gif \ + Chunk_f2.gif Chunk_f3.gif Chunk_f4.gif Chunk_f5.gif Chunk_f6.gif \ + Chunking.html Coding.html Copyright.html Datasets.html \ + Dataspaces.html Datatypes.html DatatypesEnum.html Debugging.html \ + EnumMap.gif Environment.html Errors.html FF-IH_FileGroup.gif \ + FF-IH_FileObject.gif Files.html Filters.html Glossary.html \ + Groups.html H5.api_map.html H5.format.html H5.intro.html \ + H5.sample_code.html H5.user.PrintGen.html H5.user.PrintTpg.html \ + H5.user.html IH_map1.gif IH_map2.gif IH_map3.gif IH_map4.gif \ + IH_mapFoot.gif IH_mapHead.gif IOPipe.html MountingFiles.html \ + NCSAfooterlogo.gif Performance.html PredefDTypes.html \ + Properties.html RM_H5.html RM_H5A.html RM_H5D.html RM_H5E.html \ + RM_H5F.html RM_H5Front.html RM_H5G.html RM_H5I.html RM_H5P.html \ + RM_H5R.html RM_H5S.html RM_H5T.html RM_H5Z.html References.html \ + TechNotes.html Tools.html Version.html chunk1.gif compat.html \ + dataset_p1.gif ddl.html extern1.gif extern2.gif group_p1.gif \ + group_p2.gif group_p3.gif h5s.examples hdf2.jpg ph5design.html \ + ph5example.c ph5implement.txt pipe1.gif pipe2.gif pipe3.gif \ + pipe4.gif pipe5.gif index.html version.gif diff --git a/doc/html/Makefile.in b/doc/html/Makefile.in index fd41d84..aed4a75 100644 --- a/doc/html/Makefile.in +++ b/doc/html/Makefile.in @@ -1,30 +1,199 @@ -# HDF5 Library Makefile(.in) -# -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -# -top_srcdir=@top_srcdir@ -top_builddir=../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ - -# Subdirectories in build-order (not including `examples') -SUBDIRS=ADGuide Graphics Intro PSandPDF TechNotes Tutor \ +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# +# This is the top level makefile of the Doc directory. It mostly just +# reinvokes make in the various subdirectories. +# You can alternatively invoke make from each subdirectory manually. +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5 + +# Subdirectories in build-order +SUBDIRS = ADGuide Graphics Intro PSandPDF TechNotes Tutor \ cpplus ed_libs ed_styles fortran -DOCDIR=$(docdir)/hdf5 + # Public doc files (to be installed)... -PUB_DOCS=ADGuide.html Attributes.html Big.html Caching.html Chunk_f1.gif \ +localdoc_DATA = ADGuide.html Attributes.html Big.html Caching.html Chunk_f1.gif \ Chunk_f2.gif Chunk_f3.gif Chunk_f4.gif Chunk_f5.gif Chunk_f6.gif \ Chunking.html Coding.html Copyright.html Datasets.html \ Dataspaces.html Datatypes.html DatatypesEnum.html Debugging.html \ @@ -44,13 +213,377 @@ PUB_DOCS=ADGuide.html Attributes.html Big.html Caching.html Chunk_f1.gif \ ph5example.c ph5implement.txt pipe1.gif pipe2.gif pipe3.gif \ pipe4.gif pipe5.gif index.html version.gif -# Other doc files (not to be installed)... -PRIVATE_DOCS=Chunk_f1.obj Chunk_f2.obj Chunk_f6.obj CodeReview.html \ - ExternalFiles.html Lib_Maint.html MemoryManagement.html \ - ObjectHeader.txt chunk1.obj dataset_p1.obj extern1.obj \ - extern2.obj group_p1.obj group_p2.obj group_p3.obj heap.txt \ - move.html pipe1.obj pipe2.obj pipe3.obj pipe4.obj \ - pipe5.obj review1.html review1a.html storage.html symtab \ - version.obj +subdir = doc/html +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + + +RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ + uninstall-info-recursive all-recursive install-data-recursive \ + install-exec-recursive installdirs-recursive install-recursive \ + uninstall-recursive check-recursive installcheck-recursive +DIST_COMMON = Makefile.am Makefile.in +DIST_SUBDIRS = $(SUBDIRS) +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +ETAGS = etags +ETAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +info: info-recursive + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ + clean-generic clean-libtool clean-recursive distclean \ + distclean-generic distclean-libtool distclean-recursive \ + distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ + info-recursive install install-am install-data install-data-am \ + install-data-recursive install-exec install-exec-am \ + install-exec-recursive install-info install-info-am \ + install-info-recursive install-localdocDATA install-man \ + install-recursive install-strip installcheck installcheck-am \ + installdirs installdirs-am installdirs-recursive \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ + uninstall uninstall-am uninstall-info-am \ + uninstall-info-recursive uninstall-localdocDATA \ + uninstall-recursive + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/PSandPDF/Dependencies b/doc/html/PSandPDF/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/PSandPDF/Dependencies +++ /dev/null diff --git a/doc/html/PSandPDF/Makefile.am b/doc/html/PSandPDF/Makefile.am new file mode 100644 index 0000000..0d85ec4 --- /dev/null +++ b/doc/html/PSandPDF/Makefile.am @@ -0,0 +1,16 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir=$(docdirc)/hdf5/PSandPDF + +# This makefile does nothing; there are no files to install. diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in index cf369cb..f5d805a 100644 --- a/doc/html/PSandPDF/Makefile.in +++ b/doc/html/PSandPDF/Makefile.in @@ -1,28 +1,416 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdirc)/hdf5/PSandPDF +subdir = doc/html/PSandPDF +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/PSandPDF/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile + +installdirs: + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. +# Graphically, the dependencies are: # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/PSandPDF +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; -TRACE=perl $(top_srcdir)/bin/trace +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- -# Temporary files -MOSTLYCLEAN= +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" -# Public doc files (to be installed)... -PUB_DOCS= +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -# Other doc files (not to be installed)... -PRIVATE_DOCS= +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall -@CONCLUDE@ +# This makefile does nothing; there are no files to install. +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/TechNotes/Dependencies b/doc/html/TechNotes/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/TechNotes/Dependencies +++ /dev/null diff --git a/doc/html/TechNotes/Makefile.am b/doc/html/TechNotes/Makefile.am new file mode 100644 index 0000000..a0aca2d --- /dev/null +++ b/doc/html/TechNotes/Makefile.am @@ -0,0 +1,25 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/TechNotes + +# Public doc files (to be installed)... +localdoc_DATA=BigDataSmMach.html ChStudy_1000x1000.gif ChStudy_250x250.gif \ + ChStudy_499x499.gif ChStudy_5000x1000.gif ChStudy_500x500.gif \ + ChStudy_p1.gif ChunkingStudy.html CodeReview.html \ + ExternalFiles.html FreeLists.html H4-H5Compat.html HeapMgmt.html \ + IOPipe.html LibMaint.html MemoryMgmt.html MoveDStruct.html \ + NamingScheme.html ObjectHeader.html RawDStorage.html \ + SWControls.html SymbolTables.html ThreadSafeLibrary.html VFL.html \ + VFLfunc.html Version.html openmp-hdf5.c openmp-hdf5.html \ + pipe1.gif pipe2.gif pipe3.gif pipe4.gif pipe5.gif version.gif diff --git a/doc/html/TechNotes/Makefile.in b/doc/html/TechNotes/Makefile.in index 1614312..c796e98 100644 --- a/doc/html/TechNotes/Makefile.in +++ b/doc/html/TechNotes/Makefile.in @@ -1,26 +1,190 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/TechNotes +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ -TRACE=perl $(top_srcdir)/bin/trace +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ -# Temporary files -MOSTLYCLEAN= +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/TechNotes # Public doc files (to be installed)... -PUB_DOCS=BigDataSmMach.html ChStudy_1000x1000.gif ChStudy_250x250.gif \ +localdoc_DATA = BigDataSmMach.html ChStudy_1000x1000.gif ChStudy_250x250.gif \ ChStudy_499x499.gif ChStudy_5000x1000.gif ChStudy_500x500.gif \ ChStudy_p1.gif ChunkingStudy.html CodeReview.html \ ExternalFiles.html FreeLists.html H4-H5Compat.html HeapMgmt.html \ @@ -30,7 +194,255 @@ PUB_DOCS=BigDataSmMach.html ChStudy_1000x1000.gif ChStudy_250x250.gif \ VFLfunc.html Version.html openmp-hdf5.c openmp-hdf5.html \ pipe1.gif pipe2.gif pipe3.gif pipe4.gif pipe5.gif version.gif -# Other doc files (not to be installed)... -PRIVATE_DOCS=ChStudy_p1.obj pipe1.obj pipe2.obj pipe3.obj pipe4.obj pipe5.obj +subdir = doc/html/TechNotes +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/TechNotes/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Tutor/Dependencies b/doc/html/Tutor/Dependencies deleted file mode 100644 index 3f21eb3..0000000 --- a/doc/html/Tutor/Dependencies +++ /dev/null @@ -1 +0,0 @@ -## There are no dependencies in this directory diff --git a/doc/html/Tutor/Graphics/Dependencies b/doc/html/Tutor/Graphics/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/Tutor/Graphics/Dependencies +++ /dev/null diff --git a/doc/html/Tutor/Graphics/Makefile.am b/doc/html/Tutor/Graphics/Makefile.am new file mode 100644 index 0000000..6e3a60e --- /dev/null +++ b/doc/html/Tutor/Graphics/Makefile.am @@ -0,0 +1,24 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/Tutor/Graphics + +# Public doc files (to be installed)... +localdoc_DATA=AddInfo.gif AdvTopics.gif BLANK.gif ChunkExt.gif CompDTypes.gif \ + Copy.gif CreateAttr.gif CreateDset1.gif CreateDset2.gif \ + CreateFile.gif CreateGrp1.gif CreateGrp2.gif Examples.gif \ + FileOrg.gif FullTOC1.gif FullTOC2.gif Glossary.gif H5API.gif \ + Intro.gif IntroTopics.gif Iterate.gif MountFile.gif Quiz.gif \ + QuizAns.gif RdWrDataset.gif RefObject.gif RefRegion.gif \ + References.gif SelectElemCp.gif SelectHyp.gif TOC.gif \ + TOCFull.gif TOCShort.gif TitlePg.gif Utilities.gif diff --git a/doc/html/Tutor/Graphics/Makefile.in b/doc/html/Tutor/Graphics/Makefile.in index 90aa208..46ce6b4 100644 --- a/doc/html/Tutor/Graphics/Makefile.in +++ b/doc/html/Tutor/Graphics/Makefile.in @@ -1,20 +1,190 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../../.. -srcdir=@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/Tutor/Graphics +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/Tutor/Graphics # Public doc files (to be installed)... -PUB_DOCS=AddInfo.gif AdvTopics.gif BLANK.gif ChunkExt.gif CompDTypes.gif \ +localdoc_DATA = AddInfo.gif AdvTopics.gif BLANK.gif ChunkExt.gif CompDTypes.gif \ Copy.gif CreateAttr.gif CreateDset1.gif CreateDset2.gif \ CreateFile.gif CreateGrp1.gif CreateGrp2.gif Examples.gif \ FileOrg.gif FullTOC1.gif FullTOC2.gif Glossary.gif H5API.gif \ @@ -23,7 +193,255 @@ PUB_DOCS=AddInfo.gif AdvTopics.gif BLANK.gif ChunkExt.gif CompDTypes.gif \ References.gif SelectElemCp.gif SelectHyp.gif TOC.gif \ TOCFull.gif TOCShort.gif TitlePg.gif Utilities.gif -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/Tutor/Graphics +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Tutor/Graphics/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Tutor/Makefile.am b/doc/html/Tutor/Makefile.am new file mode 100644 index 0000000..ed7ab7a --- /dev/null +++ b/doc/html/Tutor/Makefile.am @@ -0,0 +1,25 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +SUBDIRS=Graphics examples +localdocdir = $(docdir)/hdf5/Tutor + +# Public doc files (to be installed)... +localdoc_DATA=Contents.html ContentsAdd.html ContentsAdv.html \ + ContentsFull.html ContentsIntro.html Copyright.html answers.html \ + api.html bighdf2sp.JPG compound.html crtatt.html crtdat.html \ + crtfile.html crtgrp.html crtgrpar.html crtgrpd.html extend.html \ + fileorg.html glossary.html img001.gif img002.gif img003.gif \ + img004.gif img005.gif index.html intro.html iterate.html \ + mount.html questions.html rdwt.html references.html reftoobj.html \ + reftoreg.html select.html selectc.html title.html util.html diff --git a/doc/html/Tutor/Makefile.in b/doc/html/Tutor/Makefile.in index da54607..967eac5 100644 --- a/doc/html/Tutor/Makefile.in +++ b/doc/html/Tutor/Makefile.in @@ -1,20 +1,191 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -@COMMENCE@ -# Subdirectories in build-order -SUBDIRS=Graphics examples -DOCDIR=$(docdir)/hdf5/Tutor +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +SUBDIRS = Graphics examples +localdocdir = $(docdir)/hdf5/Tutor # Public doc files (to be installed)... -PUB_DOCS=Contents.html ContentsAdd.html ContentsAdv.html \ +localdoc_DATA = Contents.html ContentsAdd.html ContentsAdv.html \ ContentsFull.html ContentsIntro.html Copyright.html answers.html \ api.html bighdf2sp.JPG compound.html crtatt.html crtdat.html \ crtfile.html crtgrp.html crtgrpar.html crtgrpd.html extend.html \ @@ -23,7 +194,377 @@ PUB_DOCS=Contents.html ContentsAdd.html ContentsAdv.html \ mount.html questions.html rdwt.html references.html reftoobj.html \ reftoreg.html select.html selectc.html title.html util.html -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/Tutor +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + + +RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ + uninstall-info-recursive all-recursive install-data-recursive \ + install-exec-recursive installdirs-recursive install-recursive \ + uninstall-recursive check-recursive installcheck-recursive +DIST_COMMON = Makefile.am Makefile.in +DIST_SUBDIRS = $(SUBDIRS) +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Tutor/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +ETAGS = etags +ETAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +info: info-recursive + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ + clean-generic clean-libtool clean-recursive distclean \ + distclean-generic distclean-libtool distclean-recursive \ + distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ + info-recursive install install-am install-data install-data-am \ + install-data-recursive install-exec install-exec-am \ + install-exec-recursive install-info install-info-am \ + install-info-recursive install-localdocDATA install-man \ + install-recursive install-strip installcheck installcheck-am \ + installdirs installdirs-am installdirs-recursive \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ + uninstall uninstall-am uninstall-info-am \ + uninstall-info-recursive uninstall-localdocDATA \ + uninstall-recursive + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/Tutor/examples/Dependencies b/doc/html/Tutor/examples/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/Tutor/examples/Dependencies +++ /dev/null diff --git a/doc/html/Tutor/examples/Makefile.am b/doc/html/Tutor/examples/Makefile.am new file mode 100644 index 0000000..d28abfc --- /dev/null +++ b/doc/html/Tutor/examples/Makefile.am @@ -0,0 +1,38 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/Tutor/examples + +# Public doc files (to be installed)... +localdoc_DATA=h5_compound.c h5_copy.c h5_crtatt.c h5_crtdat.c h5_crtfile.c \ + h5_crtgrp.c h5_crtgrpar.c h5_crtgrpd.c h5_extend.c h5_hyperslab.c \ + h5_iterate.c h5_mount.c h5_rdwt.c h5_read.c h5_ref2objr.c \ + h5_ref2objw.c h5_ref2regr.c h5_ref2regw.c h5_reference.c + +nobase_localdoc_DATA=java/Compound.java java/Copy.java java/CreateAttribute.java \ + java/CreateDataset.java java/CreateFile.java \ + java/CreateFileInput.java java/CreateGroup.java \ + java/CreateGroupAR.java java/CreateGroupDataset.java \ + java/DatasetRdWt.java java/HyperSlab.java java/Makefile \ + java/Makefile.in java/README java/readme.html \ + java/runCompound.sh java/runCompound.sh.in java/runCopy.sh \ + java/runCopy.sh.in java/runCreateAttribute.sh \ + java/runCreateAttribute.sh.in java/runCreateDataset.sh \ + java/runCreateDataset.sh.in java/runCreateFile.sh \ + java/runCreateFile.sh.in java/runCreateFileInput.sh \ + java/runCreateFileInput.sh.in java/runCreateGroup.sh \ + java/runCreateGroup.sh.in java/runCreateGroupAR.sh \ + java/runCreateGroupAR.sh.in java/runCreateGroupDataset.sh \ + java/runCreateGroupDataset.sh.in java/runDatasetRdWt.sh \ + java/runDatasetRdWt.sh.in java/runHyperSlab.sh \ + java/runHyperSlab.sh.in diff --git a/doc/html/Tutor/examples/Makefile.in b/doc/html/Tutor/examples/Makefile.in index 4dcd522..243ae98 100644 --- a/doc/html/Tutor/examples/Makefile.in +++ b/doc/html/Tutor/examples/Makefile.in @@ -1,26 +1,196 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../../.. -srcdir=@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/Tutor/examples -SUBDOCDIR=$(docdir)/hdf5/Tutor/examples/java +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/Tutor/examples # Public doc files (to be installed)... -PUB_DOCS=h5_compound.c h5_copy.c h5_crtatt.c h5_crtdat.c h5_crtfile.c \ +localdoc_DATA = h5_compound.c h5_copy.c h5_crtatt.c h5_crtdat.c h5_crtfile.c \ h5_crtgrp.c h5_crtgrpar.c h5_crtgrpd.c h5_extend.c h5_hyperslab.c \ h5_iterate.c h5_mount.c h5_rdwt.c h5_read.c h5_ref2objr.c \ h5_ref2objw.c h5_ref2regr.c h5_ref2regw.c h5_reference.c -PUB_SUBDOCS=java/Compound.java java/Copy.java java/CreateAttribute.java \ + +nobase_localdoc_DATA = java/Compound.java java/Copy.java java/CreateAttribute.java \ java/CreateDataset.java java/CreateFile.java \ java/CreateFileInput.java java/CreateGroup.java \ java/CreateGroupAR.java java/CreateGroupDataset.java \ @@ -38,7 +208,275 @@ PUB_SUBDOCS=java/Compound.java java/Copy.java java/CreateAttribute.java \ java/runDatasetRdWt.sh.in java/runHyperSlab.sh \ java/runHyperSlab.sh.in -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/Tutor/examples +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) $(nobase_localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/Tutor/examples/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +nobase_localdocDATA_INSTALL = $(install_sh_DATA) +install-nobase_localdocDATA: $(nobase_localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(nobase_localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="$$p"; \ + echo " $(nobase_localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(nobase_localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-nobase_localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(nobase_localdoc_DATA)'; for p in $$list; do \ + f="$$p"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA install-nobase_localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA \ + uninstall-nobase_localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man \ + install-nobase_localdocDATA install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA uninstall-nobase_localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/cpplus/Dependencies b/doc/html/cpplus/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/cpplus/Dependencies +++ /dev/null diff --git a/doc/html/cpplus/Makefile.am b/doc/html/cpplus/Makefile.am new file mode 100644 index 0000000..81af45e --- /dev/null +++ b/doc/html/cpplus/Makefile.am @@ -0,0 +1,17 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/cpplus + +# Public doc files (to be installed)... +localdoc_DATA=CppInterfaces.html CppUserNotes.doc CppUserNotes.pdf diff --git a/doc/html/cpplus/Makefile.in b/doc/html/cpplus/Makefile.in index 7140334..533765f 100644 --- a/doc/html/cpplus/Makefile.in +++ b/doc/html/cpplus/Makefile.in @@ -1,23 +1,439 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/cpplus +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/cpplus # Public doc files (to be installed)... -PUB_DOCS=CppInterfaces.html CppUserNotes.doc CppUserNotes.pdf +localdoc_DATA = CppInterfaces.html CppUserNotes.doc CppUserNotes.pdf +subdir = doc/html/cpplus +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/cpplus/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" -# Other doc files (not to be installed)... -PRIVATE_DOCS= +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/ed_libs/Dependencies b/doc/html/ed_libs/Dependencies deleted file mode 100644 index f29a269..0000000 --- a/doc/html/ed_libs/Dependencies +++ /dev/null @@ -1,3 +0,0 @@ -## This file is machine generated on GNU systems. -## Only temporary changes may be made here. - diff --git a/doc/html/ed_libs/Makefile.am b/doc/html/ed_libs/Makefile.am new file mode 100644 index 0000000..49eb355 --- /dev/null +++ b/doc/html/ed_libs/Makefile.am @@ -0,0 +1,20 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/ed_libs + +# Public doc files (to be installed)... +localdoc_DATA=Footer.lbi NavBar_ADevG.lbi NavBar_Common.lbi NavBar_Intro.lbi \ + NavBar_RM.lbi NavBar_TechN.lbi NavBar_UG.lbi styles_Format.lbi \ + styles_Gen.lbi styles_Index.lbi styles_Intro.lbi styles_RM.lbi \ + styles_UG.lbi diff --git a/doc/html/ed_libs/Makefile.in b/doc/html/ed_libs/Makefile.in index 2078091..f95e21c 100644 --- a/doc/html/ed_libs/Makefile.in +++ b/doc/html/ed_libs/Makefile.in @@ -1,34 +1,443 @@ -# HDF5 Library Makefile(.in) -# -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ - -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/ed_libs +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/ed_libs # Public doc files (to be installed)... -PUB_DOCS=Footer.lbi NavBar_ADevG.lbi NavBar_Common.lbi NavBar_Intro.lbi \ +localdoc_DATA = Footer.lbi NavBar_ADevG.lbi NavBar_Common.lbi NavBar_Intro.lbi \ NavBar_RM.lbi NavBar_TechN.lbi NavBar_UG.lbi styles_Format.lbi \ styles_Gen.lbi styles_Index.lbi styles_Intro.lbi styles_RM.lbi \ styles_UG.lbi -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/ed_libs +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/ed_libs/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/ed_styles/Dependencies b/doc/html/ed_styles/Dependencies deleted file mode 100644 index f29a269..0000000 --- a/doc/html/ed_styles/Dependencies +++ /dev/null @@ -1,3 +0,0 @@ -## This file is machine generated on GNU systems. -## Only temporary changes may be made here. - diff --git a/doc/html/ed_styles/Makefile.am b/doc/html/ed_styles/Makefile.am new file mode 100644 index 0000000..a4b86e9 --- /dev/null +++ b/doc/html/ed_styles/Makefile.am @@ -0,0 +1,19 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/ed_styles + +# Public doc files (to be installed)... +localdoc_DATA=FormatElect.css FormatPrint.css GenElect.css GenPrint.css \ + IndexElect.css IndexPrint.css IntroElect.css IntroPrint.css \ + RMelect.css RMprint.css UGelect.css UGprint.css diff --git a/doc/html/ed_styles/Makefile.in b/doc/html/ed_styles/Makefile.in index f30e41f..132eaac 100644 --- a/doc/html/ed_styles/Makefile.in +++ b/doc/html/ed_styles/Makefile.in @@ -1,33 +1,442 @@ -# HDF5 Library Makefile(.in) -# -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ - -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/ed_styles +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/ed_styles # Public doc files (to be installed)... -PUB_DOCS=FormatElect.css FormatPrint.css GenElect.css GenPrint.css \ +localdoc_DATA = FormatElect.css FormatPrint.css GenElect.css GenPrint.css \ IndexElect.css IndexPrint.css IntroElect.css IntroPrint.css \ RMelect.css RMprint.css UGelect.css UGprint.css -# Other doc files (not to be installed)... -PRIVATE_DOCS= +subdir = doc/html/ed_styles +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/ed_styles/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" + +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/html/fortran/Dependencies b/doc/html/fortran/Dependencies deleted file mode 100644 index e69de29..0000000 --- a/doc/html/fortran/Dependencies +++ /dev/null diff --git a/doc/html/fortran/Makefile.am b/doc/html/fortran/Makefile.am new file mode 100644 index 0000000..3b21a9c --- /dev/null +++ b/doc/html/fortran/Makefile.am @@ -0,0 +1,17 @@ +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. +# +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# + +include $(top_srcdir)/config/commence-doc.am + +localdocdir = $(docdir)/hdf5/fortran + +# Public doc files (to be installed)... +localdoc_DATA=F90Flags.html F90UserNotes.html diff --git a/doc/html/fortran/Makefile.in b/doc/html/fortran/Makefile.in index 0936621..3d2657d 100644 --- a/doc/html/fortran/Makefile.in +++ b/doc/html/fortran/Makefile.in @@ -1,23 +1,439 @@ -# HDF5 Library Makefile(.in) +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# HDF5 Library Doc Makefile(.in) +# +# Copyright (C) 1997, 2002 +# National Center for Supercomputing Applications. +# All rights reserved. # -# Copyright (C) 2001 National Center for Supercomputing Applications. -# All rights reserved. # -# -top_srcdir=@top_srcdir@ -top_builddir=../../.. -srcdir=@srcdir@ -VPATH=.:@srcdir@ -@COMMENCE@ -# Subdirectories in build-order (not including `examples') -SUBDIRS= -DOCDIR=$(docdir)/hdf5/fortran +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +localdocdir = $(docdir)/hdf5/fortran # Public doc files (to be installed)... -PUB_DOCS=F90Flags.html F90UserNotes.html +localdoc_DATA = F90Flags.html F90UserNotes.html +subdir = doc/html/fortran +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(localdoc_DATA) + +DIST_COMMON = Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/html/fortran/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +localdocDATA_INSTALL = $(INSTALL_DATA) +install-localdocDATA: $(localdoc_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + @list='$(localdoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ + $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ + done + +uninstall-localdocDATA: + @$(NORMAL_UNINSTALL) + @list='$(localdoc_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ + rm -f $(DESTDIR)$(localdocdir)/$$f; \ + done +tags: TAGS +TAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(localdocdir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-localdocDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-localdocDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-localdocDATA install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-localdocDATA + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Ignore most rules +lib progs check test _test: + @echo "Nothing to be done" -# Other doc files (not to be installed)... -PRIVATE_DOCS= +tests TAGS tags dep depend: + @@SETX@; for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (cd $$d && $(MAKE) $@) || exit 1; \ + fi; + done -@CONCLUDE@ +# In docs directory, install-doc is the same as install +install-doc install-all: + $(MAKE) install +uninstall-doc uninstall-all: + $(MAKE) uninstall +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |