summaryrefslogtreecommitdiffstats
path: root/examples/Makefile.in
diff options
context:
space:
mode:
Diffstat (limited to 'examples/Makefile.in')
-rw-r--r--examples/Makefile.in1395
1 files changed, 0 insertions, 1395 deletions
diff --git a/examples/Makefile.in b/examples/Makefile.in
deleted file mode 100644
index 1b3520b..0000000
--- a/examples/Makefile.in
+++ /dev/null
@@ -1,1395 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-TESTS = $(TEST_SCRIPT)
-subdir = examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
- $(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
- $(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-c-ex.sh testh5cc.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
- mgn= red= grn= lgn= blu= brg= std=; \
- am__color_tests=no
-am__tty_colors = { \
- $(am__tty_colors_dummy); \
- if test "X$(AM_COLOR_TESTS)" = Xno; then \
- am__color_tests=no; \
- elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
- am__color_tests=yes; \
- elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
- am__color_tests=yes; \
- fi; \
- if test $$am__color_tests = yes; then \
- red=''; \
- grn=''; \
- lgn=''; \
- blu=''; \
- mgn=''; \
- brg=''; \
- std=''; \
- fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__recheck_rx = ^[ ]*:recheck:[ ]*
-am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
-am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
- recheck = 1; \
- while ((rc = (getline line < ($$0 ".trs"))) != 0) \
- { \
- if (rc < 0) \
- { \
- if ((getline line2 < ($$0 ".log")) < 0) \
- recheck = 0; \
- break; \
- } \
- else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
- { \
- recheck = 0; \
- break; \
- } \
- else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
- { \
- break; \
- } \
- }; \
- if (recheck) \
- print $$0; \
- close ($$0 ".trs"); \
- close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
- print "fatal: making $@: " msg | "cat >&2"; \
- exit 1; \
-} \
-function rst_section(header) \
-{ \
- print header; \
- len = length(header); \
- for (i = 1; i <= len; i = i + 1) \
- printf "="; \
- printf "\n\n"; \
-} \
-{ \
- copy_in_global_log = 1; \
- global_test_result = "RUN"; \
- while ((rc = (getline line < ($$0 ".trs"))) != 0) \
- { \
- if (rc < 0) \
- fatal("failed to read from " $$0 ".trs"); \
- if (line ~ /$(am__global_test_result_rx)/) \
- { \
- sub("$(am__global_test_result_rx)", "", line); \
- sub("[ ]*$$", "", line); \
- global_test_result = line; \
- } \
- else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
- copy_in_global_log = 0; \
- }; \
- if (copy_in_global_log) \
- { \
- rst_section(global_test_result ": " $$0); \
- while ((rc = (getline line < ($$0 ".log"))) != 0) \
- { \
- if (rc < 0) \
- fatal("failed to read from " $$0 ".log"); \
- print line; \
- }; \
- printf "\n"; \
- }; \
- close ($$0 ".trs"); \
- close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
- --color-tests "$$am__color_tests" \
- --enable-hard-errors "$$am__enable_hard_errors" \
- --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test. Creates the
-# directory for the log if needed. Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log. Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup); \
-$(am__vpath_adj_setup) $(am__vpath_adj) \
-$(am__tty_colors); \
-srcdir=$(srcdir); export srcdir; \
-case "$@" in \
- */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
- *) am__odir=.;; \
-esac; \
-test "x$$am__odir" = x"." || test -d "$$am__odir" \
- || $(MKDIR_P) "$$am__odir" || exit $$?; \
-if test -f "./$$f"; then dir=./; \
-elif test -f "$$f"; then dir=; \
-else dir="$(srcdir)/"; fi; \
-tst=$$dir$$f; log='$@'; \
-if test -n '$(DISABLE_HARD_ERRORS)'; then \
- am__enable_hard_errors=no; \
-else \
- am__enable_hard_errors=yes; \
-fi; \
-case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
- am__expect_failure=yes;; \
- *) \
- am__expect_failure=no;; \
-esac; \
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed). The result is saved in the shell variable
-# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
- bases='$(TEST_LOGS)'; \
- bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
- bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
- case '$@' in \
- */*) \
- case '$*' in \
- */*) b='$*';; \
- *) b=`echo '$@' | sed 's/\.log$$//'`; \
- esac;; \
- *) \
- b='$*';; \
- esac
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/run-c-ex.sh.in \
- $(srcdir)/testh5cc.sh.in $(top_srcdir)/bin/test-driver \
- $(top_srcdir)/config/commence.am \
- $(top_srcdir)/config/conclude.am \
- $(top_srcdir)/config/examples.am README
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command. Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
-# has been removed. According to the official description of DESTDIR by Gnu at
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
-# prepended to the normal and complete install path that it precedes for the
-# purpose of installing in a temporary directory which is useful for building
-# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
-# '/' at the beginning of the normal install path. When DESTDIR is empty the
-# path then begins with '//', which is incorrect and causes problems at least for
-# Cygwin.
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 $(EXTLINK_DIRS) \
- *.h5
-@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = ph5example
-INSTALL_SCRIPT_FILES = run-c-ex.sh
-INSTALL_TOP_SCRIPT_FILES = run-all-ex.sh
-INSTALL_TOP_FILES = README
-
-# Example programs.
-# Don't tell automake about them, because if it knew they were programs,
-# it would try to compile them instead of using the h5cc script.
-# Use the boilerplate in config/examples.am instead.
-EXAMPLE_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \
- h5_crtgrpd h5_subset h5_cmprss h5_rdwt h5_crtgrpar h5_extend \
- h5_crtatt h5_crtgrp h5_crtdat \
- h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers \
- h5_ref2reg h5_extlink h5_elink_unix2win h5_shared_mesg h5_vds h5_vds-exc \
- h5_vds-exclim h5_vds-eiger h5_vds-simpleIO h5_vds-percival \
- h5_vds-percival-unlim h5_vds-percival-unlim-maxmin
-
-TEST_SCRIPT = testh5cc.sh
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# Install files
-# List all file that should be installed in examples directory
-INSTALL_FILES = h5_write.c h5_read.c h5_extend_write.c h5_chunk_read.c \
- h5_crtgrpd.c h5_subset.c h5_cmprss.c h5_rdwt.c h5_crtgrpar.c \
- h5_extend.c h5_crtatt.c h5_crtgrp.c h5_crtdat.c \
- h5_compound.c h5_group.c h5_select.c h5_attribute.c h5_mount.c \
- h5_reference.c h5_drivers.c h5_extlink.c h5_elink_unix2win.c \
- h5_ref2reg.c h5_shared_mesg.c ph5example.c h5_vds.c h5_vds-exc.c \
- h5_vds-exclim.c h5_vds-eiger.c h5_vds-simpleIO.c h5_vds-percival.c \
- h5_vds-percival-unlim.c h5_vds-percival-unlim-maxmin.c
-
-
-# The external link examples demonstrate how to use paths; they need
-# directories to be created to do this.
-EXTLINK_DIRS = red blue u2w
-
-# Example directory
-# Note: no '/' after DESTDIR. Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/c
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples
-@BUILD_SHARED_SZIP_CONDITIONAL_TRUE@LD_LIBRARY_PATH = $(LL_PATH)
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times.
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
- $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
- $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS =
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign examples/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-c-ex.sh: $(top_builddir)/config.status $(srcdir)/run-c-ex.sh.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-testh5cc.sh: $(top_builddir)/config.status $(srcdir)/testh5cc.sh.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
- rm -f $< $@
- $(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
- @:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
- @$(am__set_TESTS_bases); \
- am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
- redo_bases=`for i in $$bases; do \
- am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
- done`; \
- if test -n "$$redo_bases"; then \
- redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
- redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
- if $(am__make_dryrun); then :; else \
- rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
- fi; \
- fi; \
- if test -n "$$am__remaking_logs"; then \
- echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
- "recursion detected" >&2; \
- elif test -n "$$redo_logs"; then \
- am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
- fi; \
- if $(am__make_dryrun); then :; else \
- st=0; \
- errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
- for i in $$redo_bases; do \
- test -f $$i.trs && test -r $$i.trs \
- || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
- test -f $$i.log && test -r $$i.log \
- || { echo "$$errmsg $$i.log" >&2; st=1; }; \
- done; \
- test $$st -eq 0 || exit 1; \
- fi
- @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
- ws='[ ]'; \
- results=`for b in $$bases; do echo $$b.trs; done`; \
- test -n "$$results" || results=/dev/null; \
- all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
- pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
- fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
- skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
- xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
- xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
- error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
- if test `expr $$fail + $$xpass + $$error` -eq 0; then \
- success=true; \
- else \
- success=false; \
- fi; \
- br='==================='; br=$$br$$br$$br$$br; \
- result_count () \
- { \
- if test x"$$1" = x"--maybe-color"; then \
- maybe_colorize=yes; \
- elif test x"$$1" = x"--no-color"; then \
- maybe_colorize=no; \
- else \
- echo "$@: invalid 'result_count' usage" >&2; exit 4; \
- fi; \
- shift; \
- desc=$$1 count=$$2; \
- if test $$maybe_colorize = yes && test $$count -gt 0; then \
- color_start=$$3 color_end=$$std; \
- else \
- color_start= color_end=; \
- fi; \
- echo "$${color_start}# $$desc $$count$${color_end}"; \
- }; \
- create_testsuite_report () \
- { \
- result_count $$1 "TOTAL:" $$all "$$brg"; \
- result_count $$1 "PASS: " $$pass "$$grn"; \
- result_count $$1 "SKIP: " $$skip "$$blu"; \
- result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
- result_count $$1 "FAIL: " $$fail "$$red"; \
- result_count $$1 "XPASS:" $$xpass "$$red"; \
- result_count $$1 "ERROR:" $$error "$$mgn"; \
- }; \
- { \
- echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
- $(am__rst_title); \
- create_testsuite_report --no-color; \
- echo; \
- echo ".. contents:: :depth: 2"; \
- echo; \
- for b in $$bases; do echo $$b; done \
- | $(am__create_global_log); \
- } >$(TEST_SUITE_LOG).tmp || exit 1; \
- mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
- if $$success; then \
- col="$$grn"; \
- else \
- col="$$red"; \
- test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
- fi; \
- echo "$${col}$$br$${std}"; \
- echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
- echo "$${col}$$br$${std}"; \
- create_testsuite_report --maybe-color; \
- echo "$$col$$br$$std"; \
- if $$success; then :; else \
- echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
- if test -n "$(PACKAGE_BUGREPORT)"; then \
- echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
- fi; \
- echo "$$col$$br$$std"; \
- fi; \
- $$success || exit 1
-recheck: all
- @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
- @set +e; $(am__set_TESTS_bases); \
- bases=`for i in $$bases; do echo $$i; done \
- | $(am__list_recheck_tests)` || exit 1; \
- log_list=`for i in $$bases; do echo $$i.log; done`; \
- log_list=`echo $$log_list`; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
- am__force_recheck=am--force-recheck \
- TEST_LOGS="$$log_list"; \
- exit $$?
-.sh.log:
- @p='$<'; \
- $(am__set_b); \
- $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
- --log-file $$b.log --trs-file $$b.trs \
- $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
- "$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@ @p='$<'; \
-@am__EXEEXT_TRUE@ $(am__set_b); \
-@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
- -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
- -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
- -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
- mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
- clean-generic clean-libtool cscopelist-am ctags-am distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-data-local install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installcheck-local installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
- pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
- uninstall-local
-
-.PRECIOUS: Makefile
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
- build-tests check-clean check-install check-p check-s check-vfd \
- install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
- @$(top_srcdir)/bin/makehelp
-
-# How to build examples, using installed version of h5cc
-@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5CC_PP)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@ $(H5CC_PP) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c;
-@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5CC)
-@BUILD_PARALLEL_CONDITIONAL_FALSE@ $(H5CC) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c;
-
-# Some examples depend on files created by other examples.
-h5_read.chkexe_: h5_write.chkexe_
-h5_chunk_read.chkexe_: h5_extend_write.chkexe_
-h5_crtgrpd.chkexe_: h5_crtgrpar.chkexe_
-# h5_rdwt and h5_crtatt both modify the same file created by
-# h5_crtdat. Serialize them.
-h5_rdwt.chkexe_: h5_crtdat.chkexe_
-h5_crtatt.chkexe_: h5_rdwt.chkexe_
-
-$(EXTLINK_DIRS):
- echo $(mkdir_p) $@
- $(mkdir_p) $@
-
-# List dependencies for each program. Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C compiler, not h5cc. This is
-# an inelegant way of solving the problem.
-# All programs share the same build rule and a dependency on the main hdf5
-# library above.
-h5_chunk_read: $(srcdir)/h5_chunk_read.c
-h5_compound: $(srcdir)/h5_compound.c
-h5_crtgrpd: $(srcdir)/h5_crtgrpd.c
-h5_subset: $(srcdir)/h5_subset.c
-h5_cmprss: $(srcdir)/h5_cmprss.c
-h5_rdwt: $(srcdir)/h5_rdwt.c
-h5_crtgrpar: $(srcdir)/h5_crtgrpar.c
-h5_extend: $(srcdir)/h5_extend.c
-h5_crtatt: $(srcdir)/h5_crtatt.c
-h5_crtgrp: $(srcdir)/h5_crtgrp.c
-h5_crtdat: $(srcdir)/h5_crtdat.c
-h5_extend_write: $(srcdir)/h5_extend_write.c
-h5_group: $(srcdir)/h5_group.c
-h5_write: $(srcdir)/h5_write.c
-h5_read: $(srcdir)/h5_read.c
-h5_select: $(srcdir)/h5_select.c
-h5_attribute: $(srcdir)/h5_attribute.c
-h5_mount: $(srcdir)/h5_mount.c
-h5_reference: $(srcdir)/h5_reference.c
-h5_ref2reg: $(srcdir)/h5_ref2reg.c
-h5_drivers: $(srcdir)/h5_drivers.c
-ph5example: $(srcdir)/ph5example.c
-h5_dtransform: $(srcdir)/h5_dtransform.c
-h5_extlink: $(srcdir)/h5_extlink.c $(EXTLINK_DIRS)
-h5_elink_unix2win: $(srcdir)/h5_elink_unix2win.c $(EXTLINK_DIRS)
-h5_shared_mesg: $(srcdir)/h5_shared_mesg.c
-h5_vds: $(srcdir)/h5_vds.c
-h5_vds-exc: $(srcdir)/h5_vds-exc.c
-h5_vds-exclim: $(srcdir)/h5_vds-exclim.c
-h5_vds-eiger: $(srcdir)/h5_vds-eiger.c
-h5_vds-simpleIO: $(srcdir)/h5_vds-simpleIO.c
-h5_vds-percival: $(srcdir)/h5_vds-percival.c
-h5_vds-percival-unlim: $(srcdir)/h5_vds-percival-unlim.c
-h5_vds-percival-unlim-maxmin: $(srcdir)/h5_vds-percival-unlim-maxmin.c
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
- -$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
- -$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules. We install the source files, not the
-# example programs themselves.
-install-data-local:
- @$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
- @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
- @for f in X $(INSTALL_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \
- chmod a-x $(EXAMPLEDIR)/$$f; \
- fi; \
- done
- @for f in X $(INSTALL_SCRIPT_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
- fi; \
- done
- @for f in X $(INSTALL_TOP_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
- chmod a-x $(EXAMPLETOPDIR)/$$f;\
- fi; \
- done
- @for f in X $(INSTALL_TOP_SCRIPT_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
- fi; \
- done
-
-uninstall-examples:
- @if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \
- set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES); \
- fi
- @if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then \
- set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES); \
- fi
- @if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then \
- set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES); \
- fi
- @if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then \
- set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES); \
- fi
-
-installcheck-local:
- @if test "$(STATIC_SHARED)" = "static, shared"; then \
- H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
- $(MAKE) $(AM_MAKEFLAGS) clean; \
- H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check; \
- elif test "$(STATIC_SHARED)" = "shared"; then \
- H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) check; \
- fi
- @if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
- echo "============================"; \
- echo "Testing $(TEST_EXAMPLES_SCRIPT)"; \
- echo "============================"; \
- (cd $(EXAMPLEDIR); \
- /bin/sh ./$(TEST_EXAMPLES_SCRIPT);) \
- fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
- @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
- @for d in X $(SUBDIRS); do \
- if test $$d != X && test $$d != .; then \
- (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
- fi; \
- done
-
-# General rule for recursive cleaning targets. Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
- @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
- @for d in X $(SUBDIRS); do \
- if test $$d != X && test $$d != .; then \
- (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
- fi; \
- done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
- @echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
- $(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
- @$(MAKE) build-check-s
- @$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
- @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
- echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
- fi
- @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
- @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
- echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
- fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
- @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
- tname=$(@:.chkexe_=)$(EXEEXT);\
- log=$(@:.chkexe_=.chklog); \
- echo "============================"; \
- if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
- echo "No need to test $${tname} again."; \
- else \
- echo "============================" > $${log}; \
- if test "X$(FORTRAN_API)" = "Xyes"; then \
- echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- elif test "X$(CXX_API)" = "Xyes"; then \
- echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
- else \
- echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- fi; \
- echo "============================" >> $${log}; \
- srcdir="$(srcdir)" \
- $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
- && touch $(@:.chkexe_=.chkexe) || \
- (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- (cat $${log} && false) || exit 1; \
- echo "" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
- echo "============================" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)"; \
- cat $${log}; \
- fi; \
- fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
- @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
- cmd=$(@:.chkexe_=);\
- tname=`basename $$cmd`;\
- chkname=`basename $(@:.chkexe_=.chkexe)`;\
- log=`basename $(@:.chkexe_=.chklog)`; \
- echo "============================"; \
- if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
- echo "No need to test $${tname} again."; \
- else \
- echo "============================" > $${log}; \
- if test "X$(FORTRAN_API)" = "Xyes"; then \
- echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
- echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- elif test "X$(CXX_API)" = "Xyes"; then \
- echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
- echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- else \
- echo "Testing $${tname} $(TEST_FLAGS)"; \
- echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- fi; \
- echo "============================" >> $${log}; \
- RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
- srcdir="$(srcdir)" \
- $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
- && touch $${chkname} || \
- (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- (cat $${log} && false) || exit 1; \
- echo "" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
- echo "============================" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)"; \
- cat $${log}; \
- fi; \
- echo "============================"; \
- fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
- @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
- echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
- fi
- @if test -n "$(TEST_PROG_PARA)"; then \
- echo "**** Hint ****"; \
- echo "Parallel test files reside in the current directory" \
- "by default."; \
- echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
- echo " HDF5_PARAPREFIX=/PFS/user/me"; \
- echo " export HDF5_PARAPREFIX"; \
- echo " make check"; \
- echo "**** end of Hint ****"; \
- fi
- @for test in $(TEST_PROG_PARA) dummy; do \
- if test $$test != dummy; then \
- $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
- RUNEXEC="$(RUNPARALLEL)" || exit 1; \
- fi; \
- done
- @for test in $(TEST_SCRIPT_PARA) dummy; do \
- if test $$test != dummy; then \
- $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
- fi; \
- done
- @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
- echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
- fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
- @for vfd in $(VFD_LIST) dummy; do \
- if test $$vfd != dummy; then \
- echo "============================"; \
- echo "Testing Virtual File Driver $$vfd"; \
- echo "============================"; \
- $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
- HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
- fi; \
- done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: