diff options
Diffstat (limited to 'examples/Makefile.in')
| -rw-r--r-- | examples/Makefile.in | 759 |
1 files changed, 612 insertions, 147 deletions
diff --git a/examples/Makefile.in b/examples/Makefile.in index 33ff82e..4c56389 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -1,168 +1,633 @@ -## -## Copyright by the Board of Trustees of the University of Illinois. -## All rights reserved. -## -## This file is part of HDF5. The full HDF5 copyright notice, including -## terms governing use, modification, and redistribution, is contained in -## the files COPYING and Copyright.html. COPYING can be found at the root -## of the source code distribution tree; Copyright.html can be found at the -## root level of an installed copy of the electronic HDF5 document set and -## is linked from the top-level documents page. It can also be found at -## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -## -## HDF5 Library Examples Makefile(.in) -## -top_srcdir=@top_srcdir@ -top_builddir=.. -srcdir=@srcdir@ -@COMMENCE@ - -## Replace building CC with the just installed h5cc -H5CC=$(bindir)/h5cc -H5CC_PP=$(bindir)/h5pcc -CPPFLAGS=-I. -I$(srcdir) -CFLAGS= - -## These are the programs that `make all' or `make tests' will build and which -## `make check' will run. List them in the order they should be run. -TEST_PROGS_PARA=ph5example -TEST_PROGS=h5_write h5_read h5_extend_write h5_chunk_read h5_compound \ +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +# +# HDF5 Library Examples Makefile(.in) +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/conclude' file which was generated with config.status +# from `./config/conclude.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example +@BUILD_PARALLEL_CONDITIONAL_FALSE@TEST_PROG_PARA = + +# Example programs. +# Don't tell automake about them, because if it knew they were programs, +# it would try to compile them instead of using the h5cc script. +# This creates some extra work for us. +# +# It might be possible to use automake's COMPILE variable to have it +# use h5cc properly (and h5fc and h5c++). +TEST_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \ h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers -## These are the files that `make clean' (and derivatives) will remove from -## this directory. -## *.clog are from MPE option -CLEAN=*.h5 *.raw *.meta *.clog -## List all source files here. The list of object files will be -## created by replacing the `.c' with a `.o'. This list is necessary -## for building automatic dependencies. -TEST_SRC_PARA=ph5example.c -TEST_SRC=h5_chunk_read.c h5_compound.c h5_extend_write.c h5_group.c \ - h5_read.c h5_write.c h5_select.c h5_attribute.c h5_mount.c \ - h5_reference.c h5_drivers.c $(TEST_SRC_PARA) -TEST_OBJ=$(TEST_SRC:.c=.lo) +# Tell conclude.in boilerplate when to build the examples +EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG) +EXTRA_PROG = $(EXAMPLE_PROG) -EXAMPLE_PROGS=$(TEST_SRC) +# Install files +# List all file that should be installed in examples directory +INSTALL_FILES = h5_write.c h5_read.c h5_extend_write.c h5_chunk_read.c \ + h5_compound.c h5_group.c h5_select.c h5_attribute.c h5_mount.c \ + h5_reference.c h5_drivers.c ph5example.c -## How to build the programs... they all depend on the hdf5 library -$(TEST_PROGS) $(TEST_PROGS_PARA): $(LIBHDF5) -h5_chunk_read: $(srcdir)/h5_chunk_read.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi -h5_compound: $(srcdir)/h5_compound.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +# We need to tell automake what to clean +CLEANFILES = *.h5 *.raw *.meta *.clog $(TEST_PROG) ph5example *.o -h5_extend_write: $(srcdir)/h5_extend_write.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +# How to install examples +# There are a lot of rules because automake does not know about +# the examples programs, and does not recognize the install-examples +# target. +EXAMPLEDIR = $(docdir)/hdf5/examples/c -h5_group: $(srcdir)/h5_group.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) -h5_write: $(srcdir)/h5_write.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) -h5_read: $(srcdir)/h5_read.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +subdir = examples +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DIST_COMMON = Makefile.am Makefile.in +all: all-am -h5_select: $(srcdir)/h5_select.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign examples/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -h5_attribute: $(srcdir)/h5_attribute.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +mostlyclean-libtool: + -rm -f *.lo -h5_mount: $(srcdir)/h5_mount.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +clean-libtool: + -rm -rf .libs _libs -h5_reference: $(srcdir)/h5_reference.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +distclean-libtool: + -rm -f libtool +uninstall-info-am: +tags: TAGS +TAGS: -h5_drivers: $(srcdir)/h5_drivers.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - fi +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ph5example: $(srcdir)/ph5example.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile all-local + +installdirs: + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-data-local + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: installcheck-local + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-local + +.PHONY: all all-am all-local check check-TESTS check-am clean \ + clean-generic clean-libtool distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-data-local \ + install-exec install-exec-am install-info install-info-am \ + install-man install-strip installcheck installcheck-am \ + installcheck-local installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ + uninstall-local + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# Additional dependencies for each program are listed below. +$(EXTRA_PROG): $(LIBHDF5) +@BUILD_PARALLEL_CONDITIONAL_TRUE@ $(H5CC_PP) $(CFLAGS) -o $@ $(srcdir)/$@.c; +@BUILD_PARALLEL_CONDITIONAL_FALSE@ $(H5CC) $(CFLAGS) -o $@ $(srcdir)/$@.c; + +$(EXAMPLEDIR): + -$(top_srcdir)/bin/mkdirs $@ + +install-data-local: + $(MAKE) install-examples +uninstall-local: + $(MAKE) uninstall-examples + +# We want to install the source files, not the examples themselves. Add '.c' to +# each example to get its source. This is a bit kludgy. +install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) + @for f in X $(INSTALL_FILES); do \ + if test $$f != X; then \ + (set -x; $(INSTALL) $(top_srcdir)/examples/$$f $(EXAMPLEDIR)/. || exit 1);\ + fi; \ + done + +uninstall-examples: + @if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \ + set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES).c; \ fi +check-install: + $(MAKE) installcheck +installcheck-local: + $(MAKE) check + +# List dependencies for each program. Normally, automake would take +# care of this for us, but if we tell automake about the programs it +# will try to build them with the normal C compiler, not h5cc. This is +# an inelegant way of solving the problem. +# All programs share the same build rule and a dependency on the main hdf5 +# library above. +h5_chunk_read: $(srcdir)/h5_chunk_read.c +h5_compound: $(srcdir)/h5_compound.c +h5_extend_write: $(srcdir)/h5_extend_write.c +h5_group: $(srcdir)/h5_group.c +h5_write: $(srcdir)/h5_write.c +h5_read: $(srcdir)/h5_read.c +h5_select: $(srcdir)/h5_select.c +h5_attribute: $(srcdir)/h5_attribute.c +h5_mount: $(srcdir)/h5_mount.c +h5_reference: $(srcdir)/h5_reference.c +h5_drivers: $(srcdir)/h5_drivers.c +ph5example: $(srcdir)/ph5example.c h5_dtransform: $(srcdir)/h5_dtransform.c - @if test "X$(PARALLEL)" = "Xno"; then \ - echo $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - else \ - echo $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ - $(H5CC_PP) $(CPPFLAGS) -o $@ $(srcdir)/$@.c; \ + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) + +lib progs tests :: + @$(MAKE) build-$@ || exit 1; \ + for d in X $(SUBDIRS); do \ + if test $$d != X -a $$d != .; then \ + (set -x; cd $$d && $(MAKE) $@) || exit 1; \ + fi; \ + done + +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @for test in $(TEST_PROG) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNTEST) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @for test in $(TEST_SCRIPT) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + /bin/sh $$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi -@CONCLUDE@ +# Run test with different Virtual File Driver +check-vfd: + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + HDF5_DRIVER=$$vfd $(MAKE) check; \ + fi; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |