diff options
Diffstat (limited to 'fortran/configure')
| -rwxr-xr-x | fortran/configure | 2020 |
1 files changed, 740 insertions, 1280 deletions
diff --git a/fortran/configure b/fortran/configure index 08c5702..0fb52f4 100755 --- a/fortran/configure +++ b/fortran/configure @@ -1,7 +1,7 @@ #! /bin/sh # From configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.57 for HDF5 Fortran 1.5.55. +# Generated by GNU Autoconf 2.53 for HDF5 Fortran 1.5.56. # # Report bugs to <hdfhelp@ncsa.uiuc.edu>. # @@ -9,6 +9,173 @@ # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. + +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF + +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -17,13 +184,11 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +# NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset @@ -31,42 +196,34 @@ else as_unset=false fi - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi +(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && + { $as_unset LANG || test "${LANG+set}" != set; } || + { LANG=C; export LANG; } +(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && + { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || + { LC_ALL=C; export LC_ALL; } +(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && + { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || + { LC_TIME=C; export LC_TIME; } +(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && + { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || + { LC_CTYPE=C; export LC_CTYPE; } +(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && + { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || + { LANGUAGE=C; export LANGUAGE; } +(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && + { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || + { LC_COLLATE=C; export LC_COLLATE; } +(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && + { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || + { LC_NUMERIC=C; export LC_NUMERIC; } +(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && + { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || + { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -77,7 +234,6 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -88,15 +244,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conftest.sh + echo "exit 0" >>conftest.sh + chmod +x conftest.sh + if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conf$$.sh + rm -f conftest.sh fi @@ -144,8 +300,6 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -218,12 +372,6 @@ else fi rm -f conf$$ conf$$.exe conf$$.file -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. @@ -240,166 +388,7 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH - - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF - -EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - +$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Name of the host. @@ -413,7 +402,6 @@ exec 6>&1 # Initializations. # ac_default_prefix=/usr/local -ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= @@ -428,8 +416,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5 Fortran' PACKAGE_TARNAME='hdf5-fortran' -PACKAGE_VERSION='1.5.55' -PACKAGE_STRING='HDF5 Fortran 1.5.55' +PACKAGE_VERSION='1.5.56' +PACKAGE_STRING='HDF5 Fortran 1.5.56' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/HDF5.f90" @@ -470,8 +458,6 @@ ac_includes_default="\ # include <unistd.h> #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS FFLAGS FSEARCH_DIRS R_LARGE R_INTEGER HSIZE_T HSSIZE_T HID_T SIZE_T OBJECT_NAMELEN_DEFAULT_F ROOT F9XSUFFIXFLAG CC CFLAGS LDFLAGS ac_ct_CC EXEEXT OBJEXT CPP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP EGREP LIBTOOL PERL AR LT_STATIC_EXEC F9X F9XMODFLAG F9XMODEXT PARALLEL RUNSERIAL RUNPARALLEL TESTPARALLEL FILTERS ADD_PARALLEL_FILES H5_VERSION CONFIG_DATE CONFIG_USER CONFIG_MODE BYTESEX CC_VERSION FC_VERSION DYNAMIC_DIRS SEARCH SETX LIBOBJS LTLIBOBJS' -ac_subst_files='DEPEND COMMENCE CONCLUDE' # Initialize some variables set by options. ac_init_help= @@ -895,9 +881,6 @@ if test ! -r $srcdir/$ac_unique_file; then { (exit 1); exit 1; }; } fi fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias @@ -939,7 +922,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 Fortran 1.5.55 to adapt to many kinds of systems. +\`configure' configures HDF5 Fortran 1.5.56 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1000,7 +983,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 Fortran 1.5.55:";; + short | recursive ) echo "Configuration of HDF5 Fortran 1.5.56:";; esac cat <<\_ACEOF @@ -1082,7 +1065,7 @@ esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` @@ -1108,8 +1091,8 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 Fortran configure 1.5.55 -generated by GNU Autoconf 2.57 +HDF5 Fortran configure 1.5.56 +generated by GNU Autoconf 2.53 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. @@ -1123,8 +1106,8 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 Fortran $as_me 1.5.55, which was -generated by GNU Autoconf 2.57. Invocation command line was +It was created by HDF5 Fortran $as_me 1.5.56, which was +generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ @@ -1176,54 +1159,27 @@ _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= -ac_configure_args0= -ac_configure_args1= ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 +for ac_arg do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done + case $ac_arg in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n ) continue ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + ac_sep=" " ;; + esac + # Get rid of the leading space. done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1234,7 +1190,6 @@ trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## @@ -1257,35 +1212,6 @@ _ASBOX esac; } echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## @@ -1293,7 +1219,7 @@ _ASBOX ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h | sort + sed "/^$/d" confdefs.h echo fi test "$ac_signal" != 0 && @@ -1459,8 +1385,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - ac_config_headers="$ac_config_headers src/H5config_fortran.h" +ac_config_headers="$ac_config_headers src/H5config_fortran.h" ac_aux_dir= @@ -1489,7 +1414,7 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - ac_config_commands="$ac_config_commands default-1" +ac_config_commands="$ac_config_commands default-1" # Make sure we can run config.sub. @@ -1854,7 +1779,9 @@ if test $ac_prog_rejected = yes; then # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + set dummy "$as_dir/$ac_word" ${1+"$@"} + shift + ac_cv_prog_CC="$@" fi fi fi @@ -1959,10 +1886,8 @@ fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. @@ -1987,12 +1912,14 @@ ac_compiler=`set X $ac_compile; echo $2` cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2002,7 +1929,7 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. @@ -2021,39 +1948,26 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue +for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; + ls a.out conftest 2>/dev/null; + ls a.* conftest.* 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; + *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; + a.out ) # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool --akim. + export ac_cv_exeext + break;; + * ) break;; esac done else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} +cat conftest.$ac_ext >&5 +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 +echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi @@ -2080,11 +1994,9 @@ if test "$cross_compiling" != yes; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 +If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} +If you meant to cross compile, use \`--host'." >&2;} { (exit 1); exit 1; }; } fi fi @@ -2092,7 +2004,7 @@ fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. @@ -2112,10 +2024,9 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue +for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; @@ -2123,10 +2034,8 @@ for ac_file in conftest.exe conftest conftest.*; do esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi @@ -2144,12 +2053,14 @@ if test "${ac_cv_objext+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2166,19 +2077,16 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} +cat conftest.$ac_ext >&5 +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi @@ -2195,12 +2103,14 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2227,8 +2137,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -2248,12 +2157,14 @@ if test "${ac_cv_prog_cc_g+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2277,8 +2188,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -2300,102 +2210,6 @@ else CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide @@ -2428,13 +2242,15 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <stdlib.h> $ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2458,19 +2274,20 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 : else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -2494,8 +2311,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 break else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext done @@ -2508,8 +2324,7 @@ fi else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c @@ -2541,28 +2356,18 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif +#include "confdefs.h" +#include <assert.h> Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2579,8 +2384,7 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi @@ -2590,17 +2394,13 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2618,8 +2418,7 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break @@ -2648,28 +2447,18 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif +#include "confdefs.h" +#include <assert.h> Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2686,8 +2475,7 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi @@ -2697,17 +2485,13 @@ rm -f conftest.err conftest.$ac_ext # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <ac_nonexistent.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -2725,8 +2509,7 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break @@ -2739,10 +2522,8 @@ rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} { (exit 1); exit 1; }; } fi @@ -2752,15 +2533,15 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: - @echo 'ac_maketemp="$(MAKE)"' + @echo 'ac_maketemp="${MAKE}"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` @@ -3483,21 +3264,6 @@ echo "${ECHO_T}ok" >&6 fi -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then @@ -3505,59 +3271,48 @@ if test "${ac_cv_header_stdc+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <stdlib.h> #include <stdarg.h> #include <string.h> #include <float.h> -int -main () -{ - - ; - return 0; -} _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no + cat conftest.$ac_ext >&5 + ac_cv_header_stdc=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <string.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then + egrep "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3570,16 +3325,12 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <stdlib.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then + egrep "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3595,18 +3346,13 @@ if test $ac_cv_header_stdc = yes; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <ctype.h> #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ +# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) @@ -3639,12 +3385,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi @@ -3679,11 +3424,7 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> @@ -3703,8 +3444,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -3739,11 +3479,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -3762,8 +3498,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -3775,17 +3510,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -3802,8 +3533,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -3816,32 +3546,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -4182,7 +3894,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 4185 "configure"' > conftest.$ac_ext + echo '#line 3897 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -4222,12 +3934,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -4251,8 +3965,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 lt_cv_cc_needs_belf=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -4560,12 +4273,14 @@ else CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -4604,8 +4319,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 lt_cv_prog_cc_pic_works=no fi @@ -4648,12 +4362,14 @@ else LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -4677,8 +4393,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 lt_cv_prog_cc_static_works=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" @@ -4720,7 +4435,7 @@ chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no -if { (eval echo configure:4723: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +if { (eval echo configure:4438: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then @@ -4762,12 +4477,14 @@ else ac_objext=lo cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -4798,8 +4515,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_objext="$save_objext" @@ -4847,12 +4563,14 @@ echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_ compiler_rtti_exceptions=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -4883,8 +4601,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext CFLAGS="$save_CFLAGS" @@ -6123,44 +5840,37 @@ if test "${ac_cv_func_shl_load+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif + which can conflict with char shl_load (); below. */ +#include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" -{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); +char (*f) (); + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} +f = shl_load; #endif -int -main () -{ -return f != shl_load; ; return 0; } @@ -6180,8 +5890,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6200,11 +5909,7 @@ else LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6213,6 +5918,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -6236,8 +5947,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6255,44 +5965,37 @@ if test "${ac_cv_func_dlopen+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif + which can conflict with char dlopen (); below. */ +#include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" -{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); +char (*f) (); + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} +f = dlopen; #endif -int -main () -{ -return f != dlopen; ; return 0; } @@ -6312,8 +6015,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_func_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6332,11 +6034,7 @@ else LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6345,6 +6043,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -6368,8 +6072,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6389,11 +6092,7 @@ else LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6402,6 +6101,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -6425,8 +6130,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6446,11 +6150,7 @@ else LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6459,6 +6159,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dld_link (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -6482,8 +6188,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -6541,7 +6246,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<EOF -#line 6544 "configure" +#line 6249 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -6639,7 +6344,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<EOF -#line 6642 "configure" +#line 6347 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -7583,11 +7288,7 @@ else LIBS="-lm $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7596,6 +7297,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char ceil (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -7619,8 +7326,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_m_ceil=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_m_ceil=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -7649,11 +7355,7 @@ else LIBS="-lsocket $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7662,6 +7364,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char socket (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -7685,8 +7393,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_socket_socket=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_socket_socket=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -7713,11 +7420,7 @@ else LIBS="-lnsl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7726,6 +7429,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char xdr_int (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -7749,8 +7458,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_nsl_xdr_int=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_nsl_xdr_int=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8113,11 +7821,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -8136,8 +7840,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8149,17 +7852,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8176,8 +7875,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8190,32 +7888,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -8247,11 +7927,7 @@ else LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8260,6 +7936,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -8283,8 +7965,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8310,44 +7991,37 @@ if test "${ac_cv_func_compress2+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif + which can conflict with char compress2 (); below. */ +#include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" -{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); +char (*f) (); + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_compress2) || defined (__stub___compress2) choke me #else -char (*f) () = compress2; -#endif -#ifdef __cplusplus -} +f = compress2; #endif -int -main () -{ -return f != compress2; ; return 0; } @@ -8367,8 +8041,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_compress2=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_func_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8440,11 +8113,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -8463,8 +8132,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8476,17 +8144,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8503,8 +8167,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8517,32 +8180,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -8581,11 +8226,7 @@ else LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8594,6 +8235,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -8617,8 +8264,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8644,44 +8290,37 @@ if test "${ac_cv_func_compress2+set}" = set; then else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif + which can conflict with char compress2 (); below. */ +#include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" -{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); +char (*f) (); + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_compress2) || defined (__stub___compress2) choke me #else -char (*f) () = compress2; -#endif -#ifdef __cplusplus -} +f = compress2; #endif -int -main () -{ -return f != compress2; ; return 0; } @@ -8701,8 +8340,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_func_compress2=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_func_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -8760,11 +8398,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -8783,8 +8417,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -8796,17 +8429,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -8823,8 +8452,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8837,32 +8465,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -8894,11 +8504,7 @@ else LIBS="-lsz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8907,6 +8513,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char SZ_BufftoBuffCompress (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -8930,8 +8542,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -9011,11 +8622,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -9034,8 +8641,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -9047,17 +8653,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -9074,8 +8676,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9088,32 +8689,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -9152,11 +8735,7 @@ else LIBS="-lsz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -9165,6 +8744,12 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char SZ_BufftoBuffCompress (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -9188,8 +8773,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_cv_lib_sz_SZ_BufftoBuffCompress=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -9255,11 +8839,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -9278,8 +8858,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -9291,17 +8870,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -9318,8 +8893,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9332,32 +8906,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -9389,11 +8945,7 @@ _ACEOF echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <stdio.h> #include <stdlib.h> @@ -9407,6 +8959,12 @@ cat >>conftest.$ac_ext <<_ACEOF #include <sys/socket.h> #endif +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -9436,8 +8994,7 @@ _ACEOF echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 @@ -9459,7 +9016,7 @@ cat >confcache <<\_ACEOF # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overridden when +# `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -9494,7 +9051,7 @@ _ACEOF t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else +if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -9927,14 +9484,16 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <mpi.h> +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -9964,8 +9523,7 @@ _ACEOF echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 @@ -9976,14 +9534,16 @@ rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <mpi.h> +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -10013,8 +9573,7 @@ _ACEOF echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 @@ -10115,11 +9674,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF @@ -10138,8 +9693,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext @@ -10151,17 +9705,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err + egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 @@ -10178,8 +9728,7 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -10192,32 +9741,14 @@ case $ac_header_compiler:$ac_header_preproc in { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 @@ -10238,12 +9769,14 @@ _ACEOF echo $ECHO_N "checking for GPFS support... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +#include "confdefs.h" #include <gpfs.h> +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -10275,8 +9808,7 @@ echo "${ECHO_T}yes" >&6 GPFS="yes" else echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 GPFS="no" @@ -10400,7 +9932,7 @@ fi saved_no_create=$no_create no_create=yes - ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile" +ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -10412,7 +9944,7 @@ cat >confcache <<\_ACEOF # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overridden when +# `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -10447,7 +9979,7 @@ _ACEOF t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else +if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -10478,21 +10010,6 @@ fi DEFS=-DHAVE_CONFIG_H -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -10507,12 +10024,11 @@ cat >$CONFIG_STATUS <<_ACEOF # configure, is in config.log if it exists. debug=false -ac_cs_recheck=false -ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -10521,13 +10037,11 @@ cat >>$CONFIG_STATUS <<\_ACEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +# NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset @@ -10535,42 +10049,34 @@ else as_unset=false fi - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi +(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && + { $as_unset LANG || test "${LANG+set}" != set; } || + { LANG=C; export LANG; } +(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && + { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || + { LC_ALL=C; export LC_ALL; } +(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && + { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || + { LC_TIME=C; export LC_TIME; } +(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && + { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || + { LC_CTYPE=C; export LC_CTYPE; } +(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && + { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || + { LANGUAGE=C; export LANGUAGE; } +(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && + { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || + { LC_COLLATE=C; export LC_COLLATE; } +(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && + { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || + { LC_NUMERIC=C; export LC_NUMERIC; } +(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && + { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || + { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -10581,7 +10087,6 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -10592,15 +10097,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conftest.sh + echo "exit 0" >>conftest.sh + chmod +x conftest.sh + if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conf$$.sh + rm -f conftest.sh fi @@ -10649,8 +10154,6 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -10724,12 +10227,6 @@ else fi rm -f conf$$ conf$$.exe conf$$.file -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. @@ -10746,7 +10243,7 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH +$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 @@ -10762,8 +10259,8 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 Fortran $as_me 1.5.55, which was -generated by GNU Autoconf 2.57. Invocation command line was +This file was extended by HDF5 Fortran $as_me 1.5.56, which was +generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -10803,7 +10300,6 @@ Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit - -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] @@ -10825,8 +10321,8 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 Fortran config.status 1.5.55 -configured by $0, generated by GNU Autoconf 2.57, +HDF5 Fortran config.status 1.5.56 +configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 @@ -10847,25 +10343,25 @@ do --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift + shift + set dummy "$ac_option" "$ac_optarg" ${1+"$@"} + shift ;; + -*);; *) # This is not an option, so the user has probably given explicit # arguments. - ac_option=$1 ac_need_defaults=false;; esac - case $ac_option in + case $1 in # Handling of the options. _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; + echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" + exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) @@ -10880,16 +10376,13 @@ Try \`$0 --help' for more information." >&2;} --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" + shift + CONFIG_FILES="$CONFIG_FILES $1" ac_need_defaults=false;; --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + shift + CONFIG_HEADERS="$CONFIG_HEADERS $1" ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 @@ -10904,20 +10397,6 @@ Try \`$0 --help' for more information." >&2;} shift done -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - _ACEOF cat >>$CONFIG_STATUS <<_ACEOF @@ -10969,9 +10448,6 @@ if $ac_need_defaults; then test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { @@ -10980,17 +10456,17 @@ $debug || } # Create a (secure) tmp directory for tmp files. - +: ${TMPDIR=/tmp} { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM + tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { - echo "$me: cannot create a temporary directory in ." >&2 + echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } @@ -11075,7 +10551,6 @@ s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@EGREP@,$EGREP,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@PERL@,$PERL,;t t s,@AR@,$AR,;t t @@ -11089,6 +10564,8 @@ s,@RUNPARALLEL@,$RUNPARALLEL,;t t s,@TESTPARALLEL@,$TESTPARALLEL,;t t s,@FILTERS@,$FILTERS,;t t s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t +/@DEPEND@/r $DEPEND +s,@DEPEND@,,;t t s,@H5_VERSION@,$H5_VERSION,;t t s,@CONFIG_DATE@,$CONFIG_DATE,;t t s,@CONFIG_USER@,$CONFIG_USER,;t t @@ -11097,16 +10574,12 @@ s,@BYTESEX@,$BYTESEX,;t t s,@CC_VERSION@,$CC_VERSION,;t t s,@FC_VERSION@,$FC_VERSION,;t t s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t -s,@SEARCH@,$SEARCH,;t t -s,@SETX@,$SETX,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -/@DEPEND@/r $DEPEND -s,@DEPEND@,,;t t /@COMMENCE@/r $COMMENCE s,@COMMENCE@,,;t t /@CONCLUDE@/r $CONCLUDE s,@CONCLUDE@,,;t t +s,@SEARCH@,$SEARCH,;t t +s,@SETX@,$SETX,;t t CEOF _ACEOF @@ -11177,30 +10650,25 @@ echo X"$ac_file" | /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } + { case "$ac_dir" in + [\\/]* | ?:[\\/]* ) as_incr_dir=;; + *) as_incr_dir=.;; +esac +as_dummy="$ac_dir" +for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do + case $as_mkdir_dir in + # Skip DOS drivespec + ?:) as_incr_dir=$as_mkdir_dir ;; + *) + as_incr_dir=$as_incr_dir/$as_mkdir_dir + test -d "$as_incr_dir" || + mkdir "$as_incr_dir" || + { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; } + ;; + esac +done; } ac_builddir=. @@ -11230,7 +10698,7 @@ esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` @@ -11420,7 +10888,7 @@ _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail @@ -11444,7 +10912,7 @@ do mv conftest.tail conftest.defines done rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS +echo ' fi # egrep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size @@ -11484,7 +10952,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else @@ -11500,30 +10968,25 @@ echo X"$ac_file" | /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } + { case "$ac_dir" in + [\\/]* | ?:[\\/]* ) as_incr_dir=;; + *) as_incr_dir=.;; +esac +as_dummy="$ac_dir" +for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do + case $as_mkdir_dir in + # Skip DOS drivespec + ?:) as_incr_dir=$as_mkdir_dir ;; + *) + as_incr_dir=$as_incr_dir/$as_mkdir_dir + test -d "$as_incr_dir" || + mkdir "$as_incr_dir" || + { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; } + ;; + esac +done; } rm -f $ac_file mv $tmp/config.h $ac_file @@ -11582,7 +11045,7 @@ esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` @@ -11626,11 +11089,8 @@ ac_clean_files=$ac_clean_files_save # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + $SHELL $CONFIG_STATUS || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. |