diff options
Diffstat (limited to 'fortran/src/H5Pff.f90')
| -rw-r--r-- | fortran/src/H5Pff.f90 | 6400 |
1 files changed, 6400 insertions, 0 deletions
diff --git a/fortran/src/H5Pff.f90 b/fortran/src/H5Pff.f90 new file mode 100644 index 0000000..3409f15 --- /dev/null +++ b/fortran/src/H5Pff.f90 @@ -0,0 +1,6400 @@ +!****h* ROBODoc/H5P (F90) +! +! NAME +! H5P_PROVISIONAL +! +! PURPOSE +! This file contains Fortran interfaces for H5P functions. It includes +! all the functions that are independent on whether the Fortran 2003 functions +! are enabled or disabled. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! *** IMPORTANT *** +! If you add a new H5P function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +!***** + +MODULE H5P + + USE H5GLOBAL + + INTERFACE h5pset_fapl_multi_f + MODULE PROCEDURE h5pset_fapl_multi_l + MODULE PROCEDURE h5pset_fapl_multi_s + END INTERFACE + +CONTAINS + +!****s* H5P/h5pcreate_f +! NAME +! h5pcreate_f +! +! PURPOSE +! Creates a new property as an instance of a property +! list class. +! +! INPUTS +! class - type of the property class to be created. +! Possible values are: +! H5P_OBJECT_CREATE_F +! H5P_FILE_CREATE_F +! H5P_FILE_ACCESS_F +! H5P_DATASET_CREATE_F +! H5P_DATASET_ACCESS_F +! H5P_DATASET_XFER_F +! H5P_FILE_MOUNT_F +! H5P_GROUP_CREATE_F +! H5P_GROUP_ACCESS_F +! H5P_DATATYPE_CREATE_F +! H5P_DATATYPE_ACCESS_F +! H5P_STRING_CREATE_F +! H5P_ATTRIBUTE_CREATE _F +! H5P_OBJECT_COPY_F +! H5P_LINK_CREATE_F +! H5P_LINK_ACCESS_F +! +! OUTPUTS +! prp_id - property list identifier +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pcreate_f(class, prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + INTEGER(HID_T), INTENT(OUT) :: prp_id + INTEGER , INTENT(OUT) :: hdferr +!***** +! INTEGER, EXTERNAL :: h5pcreate_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pcreate_c(class, prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCREATE_C'::h5pcreate_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: class + INTEGER(HID_T), INTENT(OUT) :: prp_id + END FUNCTION h5pcreate_c + END INTERFACE + + hdferr = h5pcreate_c(class, prp_id) + END SUBROUTINE h5pcreate_f + +!****s* H5P/h5pset_preserve_f +! NAME +! h5pset_preserve_f +! +! PURPOSE +! Sets the dataset transfer property list status to +! TRUE or FALSE for initializing compound datatype +! members during write/read operations. +! +! INPUTS +! prp_id - property list identifier +! flag - status flag +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Datatype of the flag parameter is changed from +! INTEGER to LOGICAL June 4, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_preserve_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + LOGICAL, INTENT(IN) :: flag ! TRUE/FALSE flag to set the dataset + ! transfer property for partila writing/reading + ! compound datatype + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag_c + +! INTEGER, EXTERNAL :: h5pset_preserve_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_preserve_c(prp_id, flag_c) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_PRESERVE_C'::h5pset_preserve_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: flag_c + END FUNCTION h5pset_preserve_c + END INTERFACE + flag_c = 0 + IF(flag) flag_c = 1 + hdferr = h5pset_preserve_c(prp_id, flag_c) + END SUBROUTINE h5pset_preserve_f + +!****s* H5P/h5pget_preserve_f +! NAME +! h5pget_preserve_f +! +! PURPOSE +! Checks status of the dataset transfer property list. +! +! INPUTS +! prp_id - property list identifier +! +! OUTPUTS +! flag - status flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Datatype of the flag parameter is changed from +! INTEGER to LOGICAL +! June 4, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_preserve_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag. Shows status of the dataset's + ! transfer property for partial writing/reading + ! compound datatype + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag_c + +! INTEGER, EXTERNAL :: h5pget_preserve_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_preserve_c(prp_id, flag_c) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_PRESERVE_C'::h5pget_preserve_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: flag_c + END FUNCTION h5pget_preserve_c + END INTERFACE + + hdferr = h5pget_preserve_c(prp_id, flag_c) + flag = .FALSE. + IF(flag_c .EQ. 1) flag = .TRUE. + END SUBROUTINE h5pget_preserve_f + +!****s* H5P/h5pget_class_f +! NAME +! h5pget_class_f +! +! PURPOSE +! Returns the property list class for a property list. +! +! INPUTS +! prp_id - property list identifier +! +! OUTPUTS +! classtype - property list class +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_f(prp_id, classtype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: classtype ! The type of the property list + ! to be created. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_class_c(prp_id, classtype) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_C'::h5pget_class_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: classtype + END FUNCTION h5pget_class_c + END INTERFACE + + hdferr = h5pget_class_c(prp_id, classtype) + END SUBROUTINE h5pget_class_f + +!****s* H5P/h5pcopy_f +! NAME +! h5pcopy_f +! +! PURPOSE +! Copies an existing property list to create a new +! property list +! +! INPUTS +! prp_id - property list identifier +! OUTPUTS +! new_prp_id - new property list identifier +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pcopy_f(prp_id, new_prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: new_prp_id ! Identifier of property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pcopy_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pcopy_c(prp_id, new_prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCOPY_C'::h5pcopy_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: new_prp_id + END FUNCTION h5pcopy_c + END INTERFACE + + hdferr = h5pcopy_c(prp_id, new_prp_id) + END SUBROUTINE h5pcopy_f + +!****s* H5P/h5pclose_f +! NAME +! h5pclose_f +! +! PURPOSE +! Terminates access to a property list. +! +! INPUTS +! prp_id - identifier of the property list to +! terminate access to. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pclose_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pclose_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pclose_c(prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCLOSE_C'::h5pclose_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pclose_c + END INTERFACE + + hdferr = h5pclose_c(prp_id) + END SUBROUTINE h5pclose_f + +!****s* H5P/h5pset_chunk_f +! NAME +! h5pset_chunk_f +! +! PURPOSE +! Sets the size of the chunks used to store +! a chunked layout dataset. +! +! INPUTS +! prp_id - datatset creation property list identifier +! ndims - number of dimensions for each chunk +! dims - array with dimension sizes for each chunk +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_chunk_f(prp_id, ndims, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims + ! Array containing sizes of + ! chunk dimensions + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_chunk_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_chunk_c(prp_id, ndims, dims) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHUNK_C'::h5pset_chunk_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ndims + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims + END FUNCTION h5pset_chunk_c + END INTERFACE + + hdferr = h5pset_chunk_c(prp_id, ndims, dims) + END SUBROUTINE h5pset_chunk_f + +!****s* H5P/h5pget_chunk_f +! NAME +! h5pget_chunk_f +! +! PURPOSE +! Retrieves the size of chunks for the raw data of a +! chunked layout dataset +! +! INPUTS +! prp_id - property list identifier +! ndims - size of dims array +! OUTPUTS +! dims - array with dimension sizes for each chunk +! hdferr - error code +! Success: number of chunk dimensions +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_chunk_f(prp_id, ndims, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions to + ! to return + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims + ! Array containing sizes of + ! chunk dimensions + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! number of chunk dimensions on success, + ! -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_chunk_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_chunk_c(prp_id, ndims, dims) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHUNK_C'::h5pget_chunk_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: ndims + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims + END FUNCTION h5pget_chunk_c + END INTERFACE + + hdferr = h5pget_chunk_c(prp_id, ndims, dims) + END SUBROUTINE h5pget_chunk_f + +!****s* H5P/h5pset_deflate_f +! NAME +! h5pset_deflate_f +! +! PURPOSE +! Sets compression method and compression level. +! +! INPUTS +! prp_id - property list identifier +! level - compression level +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_deflate_f(prp_id, level, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: level ! Compression level + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_deflate_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_deflate_c(prp_id, level) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_DEFLATE_C'::h5pset_deflate_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: level + END FUNCTION h5pset_deflate_c + END INTERFACE + hdferr = h5pset_deflate_c(prp_id, level) + + END SUBROUTINE h5pset_deflate_f + +!****s* H5P/h5pget_version_f +! NAME +! h5pget_version_f +! +! PURPOSE +! Retrieves the version information of various objects +! for a file creation property list +! +! INPUTS +! prp_id - file createion property list identifier +! OUTPUTS +! boot - super block version number +! freelist - global freelist version number +! stab - symbol table version number +! shhdr - shared object header version number +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_version_f(prp_id, boot, freelist, & + stab, shhdr, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, DIMENSION(:), INTENT(OUT) :: boot ! Array to put boot + ! block version number + INTEGER, DIMENSION(:), INTENT(OUT) :: freelist ! Array to put global + ! Freelist version number + + INTEGER, DIMENSION(:), INTENT(OUT) :: stab ! Array to put symbol + ! table version number + INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr ! Array to put shared + ! object header version number + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_version_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_version_c(prp_id, boot, freelist, stab, shhdr) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_VERSION_C'::h5pget_version_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, DIMENSION(:), INTENT(OUT) :: boot + INTEGER, DIMENSION(:), INTENT(OUT) :: freelist + INTEGER, DIMENSION(:), INTENT(OUT) :: stab + INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr + END FUNCTION h5pget_version_c + END INTERFACE + + hdferr = h5pget_version_c(prp_id, boot, freelist, stab, shhdr) + END SUBROUTINE h5pget_version_f + +!****s* H5P/h5pset_userblock_f +! NAME +! h5pset_userblock_f +! +! PURPOSE +! Sets user block size +! +! INPUTS +! prp_id - file creation property list to modify +! size - size of the user-block in bytes +! +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_userblock_f (prp_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_userblock_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_userblock_c(prp_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_USERBLOCK_C'::h5pset_userblock_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_userblock_c + END INTERFACE + + hdferr = h5pset_userblock_c(prp_id, size) + END SUBROUTINE h5pset_userblock_f + +!****s* H5P/h5pget_userblock_f +! NAME +! h5pget_userblock_f +! +! PURPOSE +! Gets user block size. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! block_size - size of the user block in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_userblock_f(prp_id, block_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: block_size ! Size of the + ! user-block in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_userblock_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_userblock_c(prp_id, block_size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_USERBLOCK_C'::h5pget_userblock_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: block_size + END FUNCTION h5pget_userblock_c + END INTERFACE + hdferr = h5pget_userblock_c(prp_id, block_size) + END SUBROUTINE h5pget_userblock_f + +!****s* H5P/h5pset_sizes_f +! NAME +! h5pset_sizes_f +! +! PURPOSE +! Sets the byte size of the offsets and lengths used +! to address objects in an HDF5 file. +! +! INPUTS +! prp_id - file creation property list identifier +! sizeof_addr - size of an object offset in bytes +! sizeof_size - size of an object length in bytes +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sizes_f (prp_id, sizeof_addr, sizeof_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object + ! offset in bytes + INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object + ! length in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pset_sizes_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SIZES_C'::h5pset_sizes_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr + INTEGER(SIZE_T), INTENT(IN) :: sizeof_size + END FUNCTION h5pset_sizes_c + END INTERFACE + + hdferr = h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) + END SUBROUTINE h5pset_sizes_f + +!****s* H5P/h5pget_sizes_f +! NAME +! h5pget_sizes_f +! +! PURPOSE +! Retrieves the size of the offsets and lengths used +! in an HDF5 file +! +! INPUTS +! prp_id - file creation property list identifier +! OUTPUTS +! +! sizeof_addr - size of an object offset in bytes +! sizeof_size - size of an object length in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sizes_f(prp_id, sizeof_addr, sizeof_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr ! Size of an object + ! offset in bytes + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size ! Size of an object + ! length in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_sizes_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIZES_C'::h5pget_sizes_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size + END FUNCTION h5pget_sizes_c + END INTERFACE + + hdferr = h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) + END SUBROUTINE h5pget_sizes_f + +!****s* H5P/h5pset_sym_k_f +! NAME +! h5pset_sym_k_f +! +! PURPOSE +! Sets the size of parameters used to control the +!symbol table nodes +! +! INPUTS +! +! prp_id - file creation property list identifier +! ik - symbol table tree rank +! lk - symbol table node size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sym_k_f (prp_id, ik, lk, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ik ! Symbol table tree rank + INTEGER, INTENT(IN) :: lk ! Symbol table node size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_sym_k_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_sym_k_c(prp_id, ik, lk) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SYM_K_C'::h5pset_sym_k_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ik + INTEGER, INTENT(IN) :: lk + END FUNCTION h5pset_sym_k_c + END INTERFACE + + hdferr = h5pset_sym_k_c(prp_id, ik, lk) + END SUBROUTINE h5pset_sym_k_f +!****s* H5P/h5pget_sym_k_f +! NAME +! h5pget_sym_k_f +! +! PURPOSE +! Retrieves the size of the symbol table B-tree 1/2 rank +! and the symbol table leaf node 1/2 size. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! ik - symbol table tree 1/2 rank +! lk - symbol table node 1/2 size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sym_k_f(prp_id, ik, lk, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: ik ! Symbol table tree rank + INTEGER, INTENT(OUT) :: lk ! Symbol table node size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_sym_k_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_sym_k_c(prp_id, ik, lk) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SYM_K_C'::h5pget_sym_k_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: ik + INTEGER, INTENT(OUT) :: lk + END FUNCTION h5pget_sym_k_c + END INTERFACE + + hdferr = h5pget_sym_k_c(prp_id, ik, lk) + END SUBROUTINE h5pget_sym_k_f +!****s* H5P/h5pset_istore_k_f +! NAME +! h5pset_istore_k_f +! +! PURPOSE +! Sets the size of the parameter used to control the +! B-trees for indexing chunked datasets +! +! INPUTS +! +! prp_id - file creation property list identifier +! ik - 1/2 rank of chunked storage B-tree +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_istore_k_f (prp_id, ik, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ik ! 1/2 rank of chunked storage B-tree + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_istore_k_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_istore_k_c(prp_id, ik) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ISTORE_K_C'::h5pset_istore_k_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ik + END FUNCTION h5pset_istore_k_c + END INTERFACE + + hdferr = h5pset_istore_k_c(prp_id, ik) + END SUBROUTINE h5pset_istore_k_f + +!****s* H5P/h5pget_istore_k_f +! NAME +! h5pget_istore_k_f +! +! PURPOSE +! Queries the 1/2 rank of an indexed storage B-tree. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! ik - 1/2 rank of chunked storage B-tree +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_istore_k_f(prp_id, ik, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: ik ! 1/2 rank of chunked storage B-tree + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_istore_k_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_istore_k_c(prp_id, ik) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ISTORE_K_C'::h5pget_istore_k_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: ik + END FUNCTION h5pget_istore_k_c + END INTERFACE + + hdferr = h5pget_istore_k_c(prp_id, ik) + END SUBROUTINE h5pget_istore_k_f + +!****s* H5P/h5pget_driver_f +! NAME +! h5pget_driver_f +! +! PURPOSE +! Returns low-lever driver identifier. +! +! INPUTS +! +! prp_id - file access or data transfer property +! list identifier. +! OUTPUTS +! +! driver - low-level driver identifier +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_driver_f(prp_id, driver, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: driver ! Low-level file driver identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_driver_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_driver_c(prp_id, driver) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_DRIVER_C'::h5pget_driver_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: driver + END FUNCTION h5pget_driver_c + END INTERFACE + + hdferr = h5pget_driver_c(prp_id, driver) + END SUBROUTINE h5pget_driver_f + +!****s* H5P/h5pset_fapl_stdio_f +! NAME +! h5pset_fapl_stdio_f +! +! PURPOSE +! Sets the standard I/O driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_stdio_f (prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_fapl_stdio_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_stdio_c(prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_STDIO_C'::h5pset_fapl_stdio_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_fapl_stdio_c + END INTERFACE + + hdferr = h5pset_fapl_stdio_c(prp_id) + END SUBROUTINE h5pset_fapl_stdio_f + +!****s* H5P/h5pget_stdio_f +! NAME +! h5pget_stdio_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE +! SUBROUTINE h5pget_stdio_f (prp_id, io, hdferr) +! +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER, INTENT(OUT) :: io ! value indicates that the file + !access property list is set to + !the stdio driver +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_stdio_c +! hdferr = h5pget_stdio_c(prp_id, io) +! END SUBROUTINE h5pget_stdio_f + +!****s* H5P/h5pset_fapl_sec2_f +! NAME +! h5pset_fapl_sec2_f +! +! PURPOSE +! Sets the sec2 driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_sec2_f (prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_fapl_sec2_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_sec2_c(prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_SEC2_C'::h5pset_fapl_sec2_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + END FUNCTION h5pset_fapl_sec2_c + END INTERFACE + + hdferr = h5pset_fapl_sec2_c(prp_id) + END SUBROUTINE h5pset_fapl_sec2_f + +!****s* H5P/h5pget_sec2_f +! NAME +! h5pget_sec2_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE! SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER, INTENT(OUT) :: sec2 ! value indicates whether the file + !driver uses the functions declared + !in the unistd.h file +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_sec2_c +! hdferr = h5pget_sec2_c(prp_id, sec2) +! END SUBROUTINE h5pget_sec2_f + +!****s* H5P/h5pset_alignment_f +! NAME +! h5pset_alignment_f +! +! PURPOSE +! Sets alignment properties of a file access property list. +! +! INPUTS +! +! prp_id - file access property list identifier +! threshold - threshold value +! alignment - alignment value +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_alignment_f(prp_id, threshold, alignment, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: threshold ! Threshold value + INTEGER(HSIZE_T), INTENT(IN) :: alignment ! alignment value + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_alignment_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_alignment_c(prp_id, threshold, alignment) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ALIGNMENT_C'::h5pset_alignment_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: threshold + INTEGER(HSIZE_T), INTENT(IN) :: alignment + END FUNCTION h5pset_alignment_c + END INTERFACE + + hdferr = h5pset_alignment_c(prp_id, threshold, alignment) + END SUBROUTINE h5pset_alignment_f + +!****s* H5P/h5pget_alignment_f +! NAME +! h5pget_alignment_f +! +! PURPOSE +! Retrieves the current settings for alignment +! properties from a file access property list. +! +! INPUTS +! prp_id - file access property list identifier +! +! OUTPUTS +! threshold - threshold value +! alignment - alignment value +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_alignment_f(prp_id, threshold, alignment, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: threshold ! Threshold value + INTEGER(HSIZE_T), INTENT(OUT) :: alignment ! alignment value + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_alignment_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_alignment_c(prp_id, threshold, alignment) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ALIGNMENT_C'::h5pget_alignment_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: threshold + INTEGER(HSIZE_T), INTENT(OUT) :: alignment + END FUNCTION h5pget_alignment_c + END INTERFACE + + hdferr = h5pget_alignment_c(prp_id, threshold, alignment) + END SUBROUTINE h5pget_alignment_f + +!****s* H5P/h5pset_fapl_core_f +! NAME +! h5pset_fapl_core_f +! +! PURPOSE +! Modifies the file access property list to use the +! H5FD_CORE driver. +! +! INPUTS +! prp_id - file access property list identifier +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_core_f(prp_id, increment, backing_store, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(IN) :: increment ! File block size in bytes. + LOGICAL, INTENT(IN) :: backing_store ! Flag to indicate that + ! entire file contents are flushed to a file + ! with the same name as this core file. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: backing_store_flag + +! INTEGER, EXTERNAL :: h5pset_fapl_core_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_core_c(prp_id, increment, backing_store_flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_CORE_C'::h5pset_fapl_core_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(IN) :: increment + INTEGER :: backing_store_flag + END FUNCTION h5pset_fapl_core_c + END INTERFACE + backing_store_flag = 0 + IF(backing_store) backing_store_flag = 1 + hdferr = h5pset_fapl_core_c(prp_id, increment, backing_store_flag) + END SUBROUTINE h5pset_fapl_core_f + +!****s* H5P/h5pget_fapl_core_f +! NAME +! h5pget_fapl_core_f +! +! PURPOSE +! Queries core file driver properties. +! +! INPUTS +! prp_id - file access property list identifier +! OUTPUTS +! +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_core_f(prp_id, increment, backing_store, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: increment ! File block size in bytes. + LOGICAL, INTENT(OUT) :: backing_store ! Flag to indicate that + ! entire file contents are flushed to a file + ! with the same name as this core file. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: backing_store_flag + + INTERFACE + INTEGER FUNCTION h5pget_fapl_core_c(prp_id, increment, backing_store_flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_CORE_C'::h5pget_fapl_core_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: increment + INTEGER :: backing_store_flag + END FUNCTION h5pget_fapl_core_c + END INTERFACE + + hdferr = h5pget_fapl_core_c(prp_id, increment, backing_store_flag) + backing_store =.FALSE. + IF (backing_store_flag .EQ. 1) backing_store =.TRUE. + END SUBROUTINE h5pget_fapl_core_f + +!****s* H5P/ h5pset_fapl_family_f +! NAME +! h5pset_fapl_family_f +! +! PURPOSE +! Sets the file access property list to use the family driver. +! +! INPUTS +! prp_id - file access property list identifier +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property +! list to be used for each family member +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: memb_size ! Logical size, in bytes, + ! of each family member + INTEGER(HID_T), INTENT(IN) :: memb_plist ! Identifier of the file + ! access property list for + ! each member of the family + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_fapl_family_f +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_family_c(prp_id, memb_size, memb_plist) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_FAMILY_C'::h5pset_fapl_family_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: memb_size + INTEGER(HID_T), INTENT(IN) :: memb_plist + END FUNCTION h5pset_fapl_family_c + END INTERFACE + + hdferr = h5pset_fapl_family_c(prp_id, memb_size, memb_plist) + END SUBROUTINE h5pset_fapl_family_f + +!****s* H5P/h5pget_fapl_family_f +! NAME +! h5pget_fapl_family_f +! +! PURPOSE +! Returns file access property list information. +! +! INPUTS +! prp_id - file access property list identifier +! OUTPUTS +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property +! list to be used for each family member +! hdferr - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: memb_size ! Logical size, in bytes, + ! of each family member + INTEGER(HID_T), INTENT(OUT) :: memb_plist ! Identifier of the file + ! access property list for + ! each member of the family + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_fapl_family_f +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_fapl_family_c(prp_id, memb_size, memb_plist) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_FAMILY_C'::h5pget_fapl_family_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: memb_size + INTEGER(HID_T), INTENT(OUT) :: memb_plist + END FUNCTION h5pget_fapl_family_c + END INTERFACE + + hdferr = h5pget_fapl_family_c(prp_id, memb_size, memb_plist) + END SUBROUTINE h5pget_fapl_family_f + +!****s* H5P/h5pset_cache_f +! NAME +! h5pset_cache_f +! +! PURPOSE +! Sets the meta data cache and raw data chunk +! cache parameters +! +! INPUTS +! +! prp_id - file access property list identifier +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! rdcc_w0 - preemption policy (0 or 1) +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_cache_f(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: mdc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes + REAL, INTENT(IN) :: rdcc_w0 ! Preemption policy + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_cache_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CACHE_C'::h5pset_cache_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes + REAL, INTENT(IN) :: rdcc_w0 + END FUNCTION h5pset_cache_c + END INTERFACE + + hdferr = h5pset_cache_c(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) + END SUBROUTINE h5pset_cache_f + +!****s* H5P/h5pget_cache_f +! NAME +! h5pget_cache_f +! +! PURPOSE +! Queries the meta data cache and raw data chunk cache +! parameters. +! +! INPUTS +! prp_id - file access property list identifier +! +! OUTPUTS +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! rdcc_w0 - preemption policy (0 or 1) +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Bug fix: type of the rdcc_nelmts parameter should be INTEGER +! instead of INTEGER(SIZE_T) October 10, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_cache_f(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: mdc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes + REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_cache_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CACHE_C'::h5pget_cache_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes + REAL, INTENT(OUT) :: rdcc_w0 + END FUNCTION h5pget_cache_c + END INTERFACE + + hdferr = h5pget_cache_c(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) + END SUBROUTINE h5pget_cache_f + +!****s* H5P/h5pset_fapl_split_f +! NAME +! h5pset_fapl_split_f +! +! PURPOSE +! Emulates the old split file driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! meta_ext - name of the extension for the metafile +! filename +! meta_plist - identifier of the meta file access property +! list +! raw_ext - name extension for the raw file filename +! raw_plist - identifier of the raw file access property list +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_split_f(prp_id, meta_ext, meta_plist, raw_ext, raw_plist, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: meta_ext ! Name of the extension for + ! the metafile filename + INTEGER(HID_T), INTENT(IN) :: meta_plist ! Identifier of the meta file + ! access property list + CHARACTER(LEN=*), INTENT(IN) :: raw_ext ! Name extension for the raw file filename + INTEGER(HID_T), INTENT(IN) :: raw_plist ! Identifier of the raw file + ! access property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: meta_len, raw_len + +! INTEGER, EXTERNAL :: h5pset_fapl_split_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_SPLIT_C'::h5pset_fapl_split_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: meta_ext + !DEC$ATTRIBUTES reference :: raw_ext + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(LEN=*), INTENT(IN) :: meta_ext + INTEGER(HID_T), INTENT(IN) :: meta_plist + CHARACTER(LEN=*), INTENT(IN) :: raw_ext + INTEGER(HID_T), INTENT(IN) :: raw_plist + INTEGER :: meta_len, raw_len + END FUNCTION h5pset_fapl_split_c + END INTERFACE + + meta_len = LEN(meta_ext) + raw_len = LEN(raw_ext) + hdferr = h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) + END SUBROUTINE h5pset_fapl_split_f + +!****s* H5P/h5pget_split_f +! NAME +! h5pget_split_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE +! SUBROUTINE h5pget_split_f(prp_id, meta_ext_size, meta_ext, meta_plist,raw_ext_size,& +! raw_ext, raw_plist, hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER(SIZE_T), INTENT(IN) :: meta_ext_size ! Number of characters of the meta + ! file extension to be copied to the + ! meta_ext buffer + +! CHARACTER(LEN=*), INTENT(OUT) :: meta_ext !Name of the extension for + !the metafile filename +! INTEGER(HID_T), INTENT(OUT) :: meta_plist ! Identifier of the meta file + ! access property list +! INTEGER(SIZE_T), INTENT(IN) :: raw_ext_size ! Number of characters of the raw + ! file extension to be copied to the + ! raw_ext buffer +! CHARACTER(LEN=*), INTENT(OUT) :: raw_ext !Name extension for the raw file filename +! INTEGER(HID_T), INTENT(OUT) :: raw_plist !Identifier of the raw file + !access property list +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_split_c +! hdferr = h5pget_split_c(prp_id, meta_ext_size, meta_ext, meta_plist, & +! raw_ext_size, raw_ext, raw_plist ) +! END SUBROUTINE h5pget_split_f + +!****s* H5P/h5pset_gc_references_f +! NAME +! h5pset_gc_references_f +! +! PURPOSE +! Sets garbage collecting references flag. +! +! INPUTS +! +! prp_id - file access property list identifier +! gc_reference - flag for stting garbage collection on +! and off (1 or 0) +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_gc_references_f (prp_id, gc_reference, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: gc_reference ! The flag for garbage collecting + ! references for the file + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_gc_references_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_gc_references_c(prp_id, gc_reference) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_GC_REFERENCES_C'::h5pset_gc_references_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: gc_reference + END FUNCTION h5pset_gc_references_c + END INTERFACE + + hdferr = h5pset_gc_references_c(prp_id, gc_reference) + END SUBROUTINE h5pset_gc_references_f + +!****s* H5P/h5pget_gc_references_f +! NAME +! h5pget_gc_references_f +! +! PURPOSE +! Returns garbage collecting references setting. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! gc_reference - flag for stting garbage collection on +! and off (1 or 0) +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_gc_references_f(prp_id, gc_reference, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: gc_reference ! The flag for garbage collecting + ! references for the file + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_gc_references_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_gc_references_c(prp_id, gc_reference) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_GC_REFERENCES_C'::h5pget_gc_references_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: gc_reference + END FUNCTION h5pget_gc_references_c + END INTERFACE + + hdferr = h5pget_gc_references_c(prp_id, gc_reference) + END SUBROUTINE h5pget_gc_references_f + +!****s* H5P/h5pset_layout_f +! NAME +! h5pset_layout_f +! +! PURPOSE +! Sets the type of storage used store the raw data +! for a dataset. +! +! INPUTS +! +! prp_id - data creation property list identifier +! layout - type of storage layout for raw data +! possible values are: +! H5D_COMPACT_F +! H5D_CONTIGUOUS_F +! H5D_CHUNKED_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_layout_f (prp_id, layout, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: layout ! Type of storage layout for raw data + ! possible values are: + ! H5D_COMPACT_F + ! H5D_CONTIGUOUS_F + ! H5D_CHUNKED_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_layout_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_layout_c(prp_id, layout) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LAYOUT_C'::h5pset_layout_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: layout + END FUNCTION h5pset_layout_c + END INTERFACE + + hdferr = h5pset_layout_c(prp_id, layout) + END SUBROUTINE h5pset_layout_f + +!****s* H5P/h5pget_layout_f +! NAME +! h5pget_layout_f +! +! PURPOSE +! Returns the layout of the raw data for a dataset. +! +! INPUTS +! +! prp_id - data creation property list identifier +! OUTPUTS +! +! layout - type of storage layout for raw data +! possible values are: +! H5D_COMPACT_F +! H5D_CONTIGUOUS_F +! H5D_CHUNKED_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_layout_f (prp_id, layout, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: layout ! Type of storage layout for raw data + ! possible values are: + ! H5D_COMPACT_F(0) + ! H5D_CONTIGUOUS_F(1) + ! H5D_CHUNKED_F(2) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_layout_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_layout_c(prp_id, layout) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LAYOUT_C'::h5pget_layout_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: layout + END FUNCTION h5pget_layout_c + END INTERFACE + + hdferr = h5pget_layout_c(prp_id, layout) + END SUBROUTINE h5pget_layout_f + +!****s* H5P/h5pset_filter_f +! NAME +! h5pset_filter_f +! +! PURPOSE +! Adds a filter to the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be added to the pipeline +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! February, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter ! Filter to be added to the pipeline. + INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values. + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_filter_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILTER_C'::h5pset_filter_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + END FUNCTION h5pset_filter_c + END INTERFACE + + hdferr = h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) + END SUBROUTINE h5pset_filter_f + +!****s* H5P/h5pget_nfilters_f +! NAME +! h5pget_nfilters_f +! +! PURPOSE +! Returns the number of filters in the pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! OUTPUTS +! +! nfilters - number of filters in the pipeline +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nfilters_f (prp_id, nfilters, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: nfilters ! The number of filters in the pipeline + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_nfilters_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_nfilters_c(prp_id, nfilters) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NFILTERS_C'::h5pget_nfilters_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: nfilters + END FUNCTION h5pget_nfilters_c + END INTERFACE + + hdferr = h5pget_nfilters_c(prp_id, nfilters) + END SUBROUTINE h5pget_nfilters_f + +!****s* H5P/h5pget_filter_f +! NAME +! h5pget_filter_f +! +! PURPOSE +! Returns information about a filter in a pipeline +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter_number - sequence number within the filter +! pipeline of the filter for which +! information is sought +! OUTPUTS +! +! filter_id - filter identification number +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! namelen - number of characters in the name buffer +! name - buffer to retrieve filter name +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_filter_f(prp_id, filter_number, flags, cd_nelmts, cd_values, namelen, name, filter_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter_number ! Sequence number within the filter + ! pipeline of the filter for which + ! information is sought + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. + INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter + INTEGER, INTENT(OUT) :: filter_id ! Filter identification number + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + +! INTEGER, EXTERNAL :: h5pget_filter_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & + cd_values, namelen, name, filter_id ) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILTER_C'::h5pget_filter_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter_number + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values + INTEGER, INTENT(OUT) :: flags + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts + INTEGER(SIZE_T), INTENT(IN) :: namelen + CHARACTER(LEN=*), INTENT(OUT) :: name + INTEGER, INTENT(OUT) :: filter_id + END FUNCTION h5pget_filter_c + END INTERFACE + + hdferr = h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & + cd_values, namelen, name, filter_id ) + END SUBROUTINE h5pget_filter_f + +!****s* H5P/h5pset_external_f +! NAME +! h5pset_external_f +! +! PURPOSE +! Adds an external file to the list of external files. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! name - name of external file +! offset - offset in bytes from the beginning of the +! file to the location in the file +! where the data starts +! bytes - size of the external file data. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5pset_external_f(prp_id, name, offset, bytes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an external file + INTEGER(OFF_T), INTENT(IN) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file + ! where the data starts. + INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the + ! file for the data + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5pset_external_c(prp_id, name,namelen, offset, bytes) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EXTERNAL_C'::h5pset_external_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(OFF_T), INTENT(IN) :: offset + INTEGER(HSIZE_T), INTENT(IN) :: bytes + END FUNCTION h5pset_external_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5pset_external_c(prp_id, name, namelen, offset, bytes) + END SUBROUTINE h5pset_external_f + +!****s* H5P/h5pget_external_count_f +! NAME +! h5pget_external_count_f +! +! PURPOSE +! Returns the number of external files for a dataset. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! +! count - number of external files for the +! specified dataset +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_external_count_f (prp_id, count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: count ! Number of external files for the + ! Specified dataset + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_external_count_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_external_count_c(prp_id, count) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EXTERNAL_COUNT_C'::h5pget_external_count_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: count + END FUNCTION h5pget_external_count_c + END INTERFACE + + hdferr = h5pget_external_count_c(prp_id, count) + END SUBROUTINE h5pget_external_count_f + +!****s* H5P/h5pget_external_f +! NAME +! h5pget_external_f +! +! PURPOSE +! Returns information about an external file. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! +! idx - external file index +! name_size - maximum size of name array +! name - name of the external file +! name - name of external file +! offset - offset in bytes from the beginning of the +! file to the location in the file +! where the data starts +! bytes - size of the external file data +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5pget_external_f(prp_id, idx, name_size, name, offset,bytes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: idx ! External file index. + INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of an external file + INTEGER(OFF_T), INTENT(OUT) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file + ! where the data starts. + INTEGER(HSIZE_T), INTENT(OUT) :: bytes ! Number of bytes reserved in the + ! file for the data + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_external_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EXTERNAL_C'::h5pget_external_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: idx + INTEGER(SIZE_T), INTENT(IN) :: name_size + CHARACTER(LEN=*), INTENT(OUT) :: name + INTEGER(OFF_T), INTENT(OUT) :: offset + INTEGER(HSIZE_T), INTENT(OUT) :: bytes + END FUNCTION h5pget_external_c + END INTERFACE + + hdferr = h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) + END SUBROUTINE h5pget_external_f + +!****s* H5P/h5pset_btree_ratios_f +! NAME +! h5pset_btree_ratios_f +! +! PURPOSE +! Sets B-tree split ratios for a dataset transfer +! property list. +! +! INPUTS +! +! prp_id - the dataset transfer property list +! identifier +! left - the B-tree split ratio for left-most nodes +! middle - the B-tree split ratio for all other nodes +! right - the B-tree split ratio for right-most nodes +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_btree_ratios_f(prp_id, left, middle, right, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + REAL, INTENT(IN) :: left ! The B-tree split ratio for left-most nodes. + REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(IN) :: right ! The B-tree split ratio for right-most + ! nodes and lone nodes. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_btree_ratios_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_btree_ratios_c(prp_id, left, middle, right) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_BTREE_RATIOS_C'::h5pset_btree_ratios_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + REAL, INTENT(IN) :: left + REAL, INTENT(IN) :: middle + REAL, INTENT(IN) :: right + END FUNCTION h5pset_btree_ratios_c + END INTERFACE + + hdferr = h5pset_btree_ratios_c(prp_id, left, middle, right) + END SUBROUTINE h5pset_btree_ratios_f + +!****s* H5P/h5pget_btree_ratios_f +! NAME +! h5pget_btree_ratios_f +! +! PURPOSE +! Gets B-tree split ratios for a dataset transfer property list +! +! INPUTS +! +! prp_id - the dataset transfer property list +! identifier +! OUTPUTS +! +! left - the B-tree split ratio for left-most nodes +! middle - the B-tree split ratio for all other nodes +! right - the B-tree split ratio for right-most nodes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_btree_ratios_f(prp_id, left, middle, right, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + REAL, INTENT(OUT) :: left ! The B-tree split ratio for left-most nodes. + REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(OUT) :: right ! The B-tree split ratio for right-most + ! nodes and lone nodes. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + +! INTEGER, EXTERNAL :: h5pget_btree_ratios_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_btree_ratios_c(prp_id, left, middle, right) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_BTREE_RATIOS_C'::h5pget_btree_ratios_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + REAL, INTENT(OUT) :: left + REAL, INTENT(OUT) :: middle + REAL, INTENT(OUT) :: right + END FUNCTION h5pget_btree_ratios_c + END INTERFACE + + hdferr = h5pget_btree_ratios_c(prp_id, left, middle, right) + END SUBROUTINE h5pget_btree_ratios_f + +!****s* H5P/h5pget_fclose_degree_f +! NAME +! h5pget_fclose_degree_f +! +! PURPOSE +! Returns the degree for the file close behavior. +! +! INPUTS +! +! fapl_id - File access property list identifier +! OUTPUTS +! +! degree - Possible values are: +! H5F_CLOSE_DEFAULT_F +! H5F_CLOSE_WEAK_F +! H5F_CLOSE_SEMI_F +! H5F_CLOSE_STRONG_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! September 26, 2002 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_fclose_degree_f(fapl_id, degree, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(OUT) :: degree ! Possible values are: + ! H5F_CLOSE_DEFAULT_F + ! H5F_CLOSE_WEAK_F + ! H5F_CLOSE_SEMI_F + ! H5F_CLOSE_STRONG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_fclose_degree_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_fclose_degree_c(fapl_id, degree) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FCLOSE_DEGREE_C'::h5pget_fclose_degree_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(OUT) :: degree + END FUNCTION h5pget_fclose_degree_c + END INTERFACE + + hdferr = h5pget_fclose_degree_c(fapl_id, degree) + END SUBROUTINE h5pget_fclose_degree_f + +!****s* H5P/h5pset_fclose_degree_f +! NAME +! h5pset_fclose_degree_f +! +! PURPOSE +! Sets the degree for the file close behavior. +! +! INPUTS +! +! fapl_id - file access property list identifier +! degree - Possible values are: +! H5F_CLOSE_DEFAULT_F +! H5F_CLOSE_WEAK_F +! H5F_CLOSE_SEMI_F +! H5F_CLOSE_STRONG_F +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! September 26, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fclose_degree_f(fapl_id, degree, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(IN) :: degree ! Possible values are: + ! H5F_CLOSE_DEFAULT_F + ! H5F_CLOSE_WEAK_F + ! H5F_CLOSE_SEMI_F + ! H5F_CLOSE_STRONG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_fclose_degree_c(fapl_id, degree) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FCLOSE_DEGREE_C'::h5pset_fclose_degree_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(IN) :: degree + END FUNCTION h5pset_fclose_degree_c + END INTERFACE + + hdferr = h5pset_fclose_degree_c(fapl_id, degree) + END SUBROUTINE h5pset_fclose_degree_f + +!****s* H5P/h5pequal_f +! NAME +! h5pequal_f +! +! PURPOSE +! Checks if two property lists are eqaul +! +! INPUTS +! +! plist1_id - property list identifier +! plist2_id - property list identifier +! OUTPUTS +! +! flag - flag, possible values +! .TRUE. or .FALSE. +! hdferr: - error code +! Success: 0 +! Failure: -1, flag is set to .FALSE. +! +! AUTHOR +! Elena Pourmal +! September 30, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pequal_f(plist1_id, plist2_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier + LOGICAL, INTENT(OUT) :: flag ! Flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: c_flag + + INTERFACE + INTEGER FUNCTION h5pequal_c(plist1_id, plist2_id, c_flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PEQUAL_C'::h5pequal_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist1_id + INTEGER(HID_T), INTENT(IN) :: plist2_id + INTEGER, INTENT(OUT) :: c_flag + END FUNCTION h5pequal_c + END INTERFACE + + flag = .FALSE. + hdferr = h5pequal_c(plist1_id, plist2_id, c_flag) + IF (c_flag .GT. 0) flag = .TRUE. + END SUBROUTINE h5pequal_f + +!****s* H5P/h5pset_buffer_f +! NAME +! h5pset_buffer_f +! +! PURPOSE +! Sets sixe for conversion buffer +! +! INPUTS +! plist_id - data transfer property list identifier +! size - buffer size +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 2, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_buffer_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by + ! the library. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_buffer_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_BUFFER_C'::h5pset_buffer_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_buffer_c + END INTERFACE + + hdferr = h5pset_buffer_c(plist_id, size) + END SUBROUTINE h5pset_buffer_f + +!****s* H5P/h5pget_buffer_f +! NAME +! h5pget_buffer_f +! +! PURPOSE +! Gets size for conversion buffer +! +! INPUTS +! +! plist_id - data transfer property list identifier +! OUTPUTS +! +! size - buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 2, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_buffer_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by + ! the library. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_buffer_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_BUFFER_C'::h5pget_buffer_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_buffer_c + END INTERFACE + + hdferr = h5pget_buffer_c(plist_id, size) + END SUBROUTINE h5pget_buffer_f + +!****s* H5P/h5pfill_value_defined_f +! NAME +! h5pfill_value_defined_f +! +! PURPOSE +! Check if fill value is defined. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! flag - fill value status flag +! Possible values are: +! H5D_FILL_VALUE_ERROR_F +! H5D_FILL_VALUE_UNDEFINED_F +! H5D_FILL_VALUE_DEFAULT_F +! H5D_FILL_VALUE_USER_DEFINED_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pfill_value_defined_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Fill value status flag + ! H5D_FILL_VALUE_ERROR_F + ! H5D_FILL_VALUE_UNDEFINED_F + ! H5D_FILL_VALUE_DEFAULT_F + ! H5D_FILL_VALUE_USER_DEFINED_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pfill_value_defined_c(plist_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PFILL_VALUE_DEFINED_C'::h5pfill_value_defined_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pfill_value_defined_c + END INTERFACE + + hdferr = h5pfill_value_defined_c(plist_id, flag) + END SUBROUTINE h5pfill_value_defined_f + +!****s* H5P/h5pset_alloc_time_f +! NAME +! h5pset_alloc_time_f +! +! PURPOSE +! Set space allocation time for dataset during creation. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! flag - allocation time flag: +! H5D_ALLOC_TIME_ERROR_F +! H5D_ALLOC_TIME_DEFAULT_F +! H5D_ALLOC_TIME_EARLY_F +! H5D_ALLOC_TIME_LATE_F +! H5D_ALLOC_TIME_INCR_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_alloc_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(IN) :: flag ! Allocation time flag: + ! H5D_ALLOC_TIME_ERROR_F + ! H5D_ALLOC_TIME_DEFAULT_F + ! H5D_ALLOC_TIME_EARLY_F + ! H5D_ALLOC_TIME_LATE_F + ! H5D_ALLOC_TIME_INCR_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_alloc_time_c(plist_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ALLOC_TIME_C'::h5pset_alloc_time_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_alloc_time_c + END INTERFACE + + hdferr = h5pset_alloc_time_c(plist_id, flag) + END SUBROUTINE h5pset_alloc_time_f + +!****s* H5P/h5pget_alloc_time_f +! NAME +! h5pget_alloc_time_f +! +! PURPOSE +! Get space allocation time for dataset during creation. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! flag - allocation time flag: +! H5D_ALLOC_TIME_ERROR_F +! H5D_ALLOC_TIME_DEFAULT_F +! H5D_ALLOC_TIME_EARLY_F +! H5D_ALLOC_TIME_LATE_F +! H5D_ALLOC_TIME_INCR_F +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_alloc_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Allocation time flag: + ! H5D_ALLOC_TIME_ERROR_F + ! H5D_ALLOC_TIME_DEFAULT_F + ! H5D_ALLOC_TIME_EARLY_F + ! H5D_ALLOC_TIME_LATE_F + ! H5D_ALLOC_TIME_INCR_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_alloc_time_c(plist_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ALLOC_TIME_C'::h5pget_alloc_time_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_alloc_time_c + END INTERFACE + + hdferr = h5pget_alloc_time_c(plist_id, flag) + END SUBROUTINE h5pget_alloc_time_f + +!****s* H5P/h5pset_fill_time_f +! NAME +! h5pset_fill_time_f +! +! PURPOSE +! Set fill value writing time for dataset +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! flag - fill time flag: +! H5D_FILL_TIME_ERROR_F +! H5D_FILL_TIME_ALLOC_F +! H5D_FILL_TIME_NEVER_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fill_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(IN) :: flag ! Fill time flag: + ! H5D_FILL_TIME_ERROR_F + ! H5D_FILL_TIME_ALLOC_F + ! H5D_FILL_TIME_NEVER_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_fill_time_c(plist_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_TIME_C'::h5pset_fill_time_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fill_time_c + END INTERFACE + + hdferr = h5pset_fill_time_c(plist_id, flag) + END SUBROUTINE h5pset_fill_time_f + +!****s* H5P/h5pget_fill_time_f +! NAME +! h5pget_fill_time_f +! +! PURPOSE +! Get fill value writing time for dataset +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! OPTIONAL PARAMETERS +! +! flag - fill time flag: +! H5D_FILL_TIME_ERROR_F +! H5D_FILL_TIME_ALLOC_F +! H5D_FILL_TIME_NEVER_F +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fill_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Fill time flag: + ! H5D_FILL_TIME_ERROR_F + ! H5D_FILL_TIME_ALLOC_F + ! H5D_FILL_TIME_NEVER_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_fill_time_c(plist_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_TIME_C'::h5pget_fill_time_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_fill_time_c + END INTERFACE + + hdferr = h5pget_fill_time_c(plist_id, flag) + END SUBROUTINE h5pget_fill_time_f + +!****s* H5P/ h5pset_meta_block_size_f +! NAME +! h5pset_meta_block_size_f +! +! PURPOSE +! Sets the minimum size of metadata block allocations +! +! INPUTS +! +! plist_id - file access property list identifier +! size - metatdata block size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_meta_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Block size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_meta_block_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_META_BLOCK_SIZE_C'::h5pset_meta_block_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_meta_block_size_c + END INTERFACE + + hdferr = h5pset_meta_block_size_c(plist_id, size) + END SUBROUTINE h5pset_meta_block_size_f + +!****s* H5P/h5pget_meta_block_size_f +! NAME +! h5pget_meta_block_size_f +! +! PURPOSE +! Gets the minimum size of metadata block allocations +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - metatdata block size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_meta_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Block size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_meta_block_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_META_BLOCK_SIZE_C'::h5pget_meta_block_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_meta_block_size_c + END INTERFACE + + hdferr = h5pget_meta_block_size_c(plist_id, size) + END SUBROUTINE h5pget_meta_block_size_f + +!****s* H5P/h5pset_sieve_buf_size_f +! NAME +! h5pset_sieve_buf_size_f +! +! PURPOSE +! Sets the maximum size of the data sieve buffer +! +! INPUTS +! +! plist_id - file access property list identifier +! size - sieve buffer size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sieve_buf_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_sieve_buf_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SIEVE_BUF_SIZE_C'::h5pset_sieve_buf_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_sieve_buf_size_c + END INTERFACE + + hdferr = h5pset_sieve_buf_size_c(plist_id, size) + END SUBROUTINE h5pset_sieve_buf_size_f + +!****s* H5P/h5pget_sieve_buf_size_f +! NAME +! h5pget_sieve_buf_size_f +! +! PURPOSE +! Gets the maximum size of the data sieve buffer +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - sieve buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sieve_buf_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Buffer size in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_sieve_buf_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIEVE_BUF_SIZE_C'::h5pget_sieve_buf_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_sieve_buf_size_c + END INTERFACE + + hdferr = h5pget_sieve_buf_size_c(plist_id, size) + END SUBROUTINE h5pget_sieve_buf_size_f + +!****s* H5P/h5pset_small_data_block_size_f +! NAME +! h5pset_small_data_block_size_f +! +! PURPOSE +! Sets the minimum size of "small" raw data block +! +! INPUTS +! +! plist_id - file access property list identifier +! size - small raw data block size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_small_data_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Small raw data block size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_small_data_block_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SMALL_DATA_BLOCK_SIZE_C'::h5pset_small_data_block_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_small_data_block_size_c + END INTERFACE + + hdferr = h5pset_small_data_block_size_c(plist_id, size) + END SUBROUTINE h5pset_small_data_block_size_f + +!****s* H5P/h5pget_small_data_block_size_f +! NAME +! h5pget_small_data_block_size_f +! +! PURPOSE +! Gets the minimum size of "small" raw data block +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - small raw data block size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_small_data_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Small raw data block size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_small_data_block_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SMALL_DATA_BLOCK_SIZE_C'::h5pget_small_data_block_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_small_data_block_size_c + END INTERFACE + + hdferr = h5pget_small_data_block_size_c(plist_id, size) + END SUBROUTINE h5pget_small_data_block_size_f + +!****s* H5P/h5pset_hyper_vector_size_f +! NAME +! h5pset_hyper_vector_size_f +! +! PURPOSE +! Set the number of "I/O" vectors (vector size) +! +! INPUTS +! +! plist_id - dataset transfer property list identifier +! size - vector size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_hyper_vector_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Vector size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_hyper_vector_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_HYPER_VECTOR_SIZE_C'::h5pset_hyper_vector_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_hyper_vector_size_c + END INTERFACE + + hdferr = h5pset_hyper_vector_size_c(plist_id, size) + END SUBROUTINE h5pset_hyper_vector_size_f + +!****s* H5P/ h5pget_hyper_vector_size_f +! NAME +! h5pget_hyper_vector_size_f +! +! PURPOSE +! Get the number of "I/O" vectors (vector size) +! +! INPUTS +! +! plist_id - dataset transfer property list identifier +! OUTPUTS +! +! size - vector size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_hyper_vector_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Vector size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_hyper_vector_size_c(plist_id, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_HYPER_VECTOR_SIZE_C'::h5pget_hyper_vector_size_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_hyper_vector_size_c + END INTERFACE + + hdferr = h5pget_hyper_vector_size_c(plist_id, size) + END SUBROUTINE h5pget_hyper_vector_size_f + +!****s* H5P/h5pexist_f +! NAME +! h5pexist_f +! +! PURPOSE +! Queries whether a property name exists in a property list or class. +! +! INPUTS +! +! prp_id - property list identifier to query +! name - name of property to check for +! OUTPUTS +! +! flag - logical flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pexist_f(prp_id, name, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + LOGICAL, INTENT(OUT) :: flag ! .TRUE. if exists, .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pexist_c(prp_id, name, name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PEXIST_C'::h5pexist_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pexist_c + END INTERFACE + flag = .FALSE. + name_len = LEN(name) + hdferr = h5pexist_c(prp_id, name , name_len) + IF (hdferr > 0) THEN + flag = .TRUE. + hdferr = 0 + ENDIF + END SUBROUTINE h5pexist_f + +!****s* H5P/h5pget_size_f +! +! NAME +! h5pget_size_f +! +! PURPOSE +! Queries the size of a property value in bytes. +! +! INPUTS +! +! prp_id - property list identifier to query +! name - name of property to query +! OUTPUTS +! +! size - size of property in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_size_f(prp_id, name, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to query + INTEGER(SIZE_T), INTENT(OUT) :: size ! Size in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pget_size_c(prp_id, name, name_len, size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIZE_C'::h5pget_size_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_size_c + END INTERFACE + name_len = LEN(name) + hdferr = h5pget_size_c(prp_id, name , name_len, size) + END SUBROUTINE h5pget_size_f + +!****s* H5P/h5pget_npros_f +! NAME +! h5pget_npros_f +! +! PURPOSE +! Queries number of properties in property list or class +! +! INPUTS +! +! prp_id - iproperty list identifier to query +! OUTPUTS +! +! nprops - number of properties in property object +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nprops_f(prp_id, nprops, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: nprops ! Number of properties + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_nprops_c(prp_id, nprops) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NPROPS_C'::h5pget_nprops_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: nprops + END FUNCTION h5pget_nprops_c + END INTERFACE + hdferr = h5pget_nprops_c(prp_id, nprops) + END SUBROUTINE h5pget_nprops_f + +!****s* H5P/h5pget_class_name_f +! NAME +! h5pget_class_name_f +! +! PURPOSE +! Queries the name of a class. +! +! INPUTS +! +! prp_id - property list identifier to query +! OUTPUTS +! +! name - name of a class +! size - Actual length of the class name +! NOTE: If provided buffer "name" is smaller, +! than name will be truncated to fit into +! provided user buffer. +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! HISTORY +! Returned the size of name as an argument +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_name_f(prp_id, name, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer to retireve class name + INTEGER, INTENT(OUT) :: size ! Actual length of the class name + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pget_class_name_c(prp_id, name, name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_NAME_C'::h5pget_class_name_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(LEN=*), INTENT(INOUT) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pget_class_name_c + END INTERFACE + + name_len = LEN(name) + size = h5pget_class_name_c(prp_id, name, name_len) + + hdferr = 0 + IF(size.LT.0) hdferr = -1 + + END SUBROUTINE h5pget_class_name_f + +!****s* H5P/h5pget_class_parent_f +! NAME +! h5pget_class_parent_f +! +! PURPOSE +! Retrieves the parent class of a genric property class. +! +! INPUTS +! +! prp_id - property list identifier to query +! OUTPUTS +! +! parent_id - identifier of the parent class +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_parent_f(prp_id, parent_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list + ! identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_class_parent_c(prp_id, parent_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_PARENT_C'::h5pget_class_parent_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: parent_id + END FUNCTION h5pget_class_parent_c + END INTERFACE + hdferr = h5pget_class_parent_c(prp_id, parent_id) + END SUBROUTINE h5pget_class_parent_f + +!****s* H5P/h5pisa_class_f +! NAME +! h5pisa_class_f +! +! PURPOSE +! Determines whether a property list is a member of a class. +! +! INPUTS +! +! plist - property list identifier +! pclass - identifier of the property class +! OUTPUTS +! +! flag - .TRUE. if a member, .FALSE. otherwise +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pisa_class_f(plist, pclass, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: pclass ! Class identifier + LOGICAL, INTENT(OUT) :: flag ! logical flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pisa_class_c(plist, pclass) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PISA_CLASS_C'::h5pisa_class_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist + INTEGER(HID_T), INTENT(IN) :: pclass + END FUNCTION h5pisa_class_c + END INTERFACE + flag = .FALSE. + hdferr = h5pisa_class_c(plist, pclass) + IF (hdferr .GT. 0) THEN + flag = .TRUE. + hdferr = 0 + ENDIF + END SUBROUTINE h5pisa_class_f + +!****s* H5P/h5pcopy_prop_f +! NAME +! h5pcopy_prop_f +! +! PURPOSE +! Copies a property from one list or class to another. +! +! INPUTS +! +! dst_id - Identifier of the destination property list +! src_id - Identifier of the source property list +! name - name of the property to copy +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pcopy_prop_f(dst_id, src_id, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dst_id ! Destination property list + ! identifier + INTEGER(HID_T), INTENT(IN) :: src_id ! Source property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Property name + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pcopy_prop_c(dst_id, src_id, name, name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCOPY_PROP_C'::h5pcopy_prop_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: dst_id + INTEGER(HID_T), INTENT(IN) :: src_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pcopy_prop_c + END INTERFACE + name_len = LEN(name) + hdferr = h5pcopy_prop_c(dst_id, src_id, name , name_len) + END SUBROUTINE h5pcopy_prop_f + +!****s* H5P/h5premove_f +! NAME +! h5premove_f +! +! PURPOSE +! Removes a property from a property list. + +! +! INPUTS +! +! plid - Property list identofoer +! name - name of the property to remove +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5premove_f(plid, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plid ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to remove + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5premove_c(plid, name, name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREMOVE_C'::h5premove_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: plid + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5premove_c + END INTERFACE + name_len = LEN(name) + hdferr = h5premove_c(plid, name , name_len) + END SUBROUTINE h5premove_f + +!****s* H5P/h5punregister_f +! NAME +! h5punregister_f +! +! PURPOSE +! Removes a property from a property list class. +! +! INPUTS +! +! class - Property list class identifier +! name - name of the property to remove +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5punregister_f(class, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! property list class identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! name of property to remove + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5punregister_c(class, name, name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PUNREGISTER_C'::h5punregister_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: class + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5punregister_c + END INTERFACE + name_len = LEN(name) + hdferr = h5punregister_c(class, name , name_len) + END SUBROUTINE h5punregister_f + +!****s* H5P/h5pclose_class_f +! NAME +! h5pclose_class_f +! +! PURPOSE +! Closes an existing property list class. +! +! INPUTS +! +! class - Property list class identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pclose_class_f(class, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pclose_class_c(class) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCLOSE_CLASS_C'::h5pclose_class_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: class + END FUNCTION h5pclose_class_c + END INTERFACE + hdferr = h5pclose_class_c(class) + END SUBROUTINE h5pclose_class_f + +!****s* H5P/h5pset_shuffle_f +! NAME +! h5pset_shuffle_f +! +! PURPOSE +! Sets shuffling filter +! +! INPUTS +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shuffle_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_shuffle_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_shuffle_c(prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHUFFLE_C'::h5pset_shuffle_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_shuffle_c + END INTERFACE + hdferr = h5pset_shuffle_c(prp_id) + + END SUBROUTINE h5pset_shuffle_f + +!****s* H5P/h5pset_edc_check_f +! NAME +! h5pset_edc_check_f +! +! PURPOSE +! Enables/disables error detecting +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! flag - EDC flag; possible values: +! H5Z_DISABLE_EDC_F +! H5Z_ENABLE_EDC_F +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_edc_check_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: flag ! Checksum filter flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_edc_check_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_edc_check_c(prp_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EDC_CHECK_C'::h5pset_edc_check_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_edc_check_c + END INTERFACE + hdferr = h5pset_edc_check_c(prp_id, flag) + + END SUBROUTINE h5pset_edc_check_f + +!****s* H5P/h5pget_edc_check_f +! NAME +! h5pget_edc_check_f +! +! PURPOSE +! Queries error detecting +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_edc_check_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier + INTEGER, INTENT(OUT) :: flag ! Checksum filter flag + ! May have one of the following values: + ! H5Z_ERROR_EDC_F + ! H5Z_DISABLE_EDC_F + ! H5Z_ENABLE_EDC_F + ! H5Z_NO_EDC_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_edc_check_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_edc_check_c(prp_id, flag) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EDC_CHECK_C'::h5pget_edc_check_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_edc_check_c + END INTERFACE + hdferr = h5pget_edc_check_c(prp_id, flag) + + END SUBROUTINE h5pget_edc_check_f + +!****s* H5P/h5pset_fletcher32_f +! NAME +! h5pset_fletcher32_f +! +! PURPOSE +! Sets Fletcher32 checksum of EDC for a dataset creation +! property list. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fletcher32_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_fletcher32_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fletcher32_c(prp_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FLETCHER32_C'::h5pset_fletcher32_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_fletcher32_c + END INTERFACE + hdferr = h5pset_fletcher32_c(prp_id) + + END SUBROUTINE h5pset_fletcher32_f + +!****s* H5P/ h5pset_family_offset_f +! NAME +! h5pset_family_offset_f +! +! PURPOSE +! Sets offset for family file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! offset - file offset +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 19 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_family_offset_f(prp_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: offset ! Offset in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_family_offset_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_family_offset_c(prp_id, offset) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAMILY_OFFSET_C'::h5pset_family_offset_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: offset + END FUNCTION h5pset_family_offset_c + END INTERFACE + hdferr = h5pset_family_offset_c(prp_id, offset) + + END SUBROUTINE h5pset_family_offset_f + +!****s* H5P/h5pset_fapl_multi_l +! NAME +! h5pset_fapl_multi_l +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! mem_map - mapping array +! memb_fapl - property list for each memory usage type +! memb_name - names of member file +! relax - flag +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 20 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_multi_l(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, DIMENSION(*), INTENT(IN) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name + REAL, DIMENSION(*), INTENT(IN) :: memb_addr + LOGICAL, INTENT(IN) :: relax + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm + INTEGER :: maxlen + INTEGER :: flag = 0 + INTEGER :: i + + INTERFACE + INTEGER FUNCTION h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & + maxlen, memb_addr, flag) + USE H5GLOBAL + IMPLICIT NONE + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_MULTI_C'::h5pset_fapl_multi_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: memb_name + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(IN) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name + REAL, DIMENSION(*), INTENT(IN) :: memb_addr + INTEGER, DIMENSION(*) :: lenm + INTEGER :: maxlen + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fapl_multi_c + END INTERFACE + + maxlen = LEN(memb_name(1)) + DO i=1, H5FD_MEM_NTYPES_F + lenm(i) = LEN_TRIM(memb_name(i)) + ENDDO + IF(relax) flag = 1 + hdferr = h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag) + + END SUBROUTINE h5pset_fapl_multi_l +!****s* H5P/h5pset_fapl_multi_s +! NAME +! h5pset_fapl_multi_s +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! relax - flag +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 31 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_multi_s(prp_id, relax, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + LOGICAL, INTENT(IN) :: relax + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag + +! INTEGER, EXTERNAL :: h5pset_fapl_multi_sc +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_multi_sc(prp_id,flag) + USE H5GLOBAL + IMPLICIT NONE + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_MULTI_SC'::h5pset_fapl_multi_sc + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fapl_multi_sc + END INTERFACE + flag = 0 + IF (relax) flag = 1 + hdferr = h5pset_fapl_multi_sc(prp_id, flag) + + END SUBROUTINE h5pset_fapl_multi_s +!****s* H5P/h5pget_fapl_multi_f +! NAME +! h5pget_fapl_multi_f +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! mem_map - mapping array +! memb_fapl - property list for each memory usage type +! memb_name - names of member file +! relax - flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! OPTIONAL PARAMETERS +! maxlen_out - maximum length for memb_name array element +! +! AUTHOR +! Elena Pourmal +! 24 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_multi_f(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr, maxlen_out) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name + REAL, DIMENSION(*), INTENT(OUT) :: memb_addr + INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out + LOGICAL, INTENT(OUT) :: relax + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm + INTEGER :: maxlen + INTEGER :: c_maxlen_out + INTEGER :: flag + INTEGER :: i +! + INTERFACE + INTEGER FUNCTION h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & + maxlen, memb_addr, flag, c_maxlen_out) + USE H5GLOBAL + IMPLICIT NONE + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_MULTI_C'::h5pget_fapl_multi_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: memb_name + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name + REAL, DIMENSION(*), INTENT(OUT) :: memb_addr + INTEGER, DIMENSION(*) :: lenm + INTEGER :: maxlen + INTEGER :: c_maxlen_out + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_fapl_multi_c + END INTERFACE + + maxlen = LEN(memb_name(1)) + DO i=1, H5FD_MEM_NTYPES_F + lenm(i) = LEN_TRIM(memb_name(i)) + ENDDO + hdferr = h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag, c_maxlen_out) + + relax = .TRUE. + IF(flag .EQ. 0) relax = .FALSE. + IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out + END SUBROUTINE h5pget_fapl_multi_f +!****s* H5P/h5pset_szip_f +! NAME +! h5pset_szip_f +! +! PURPOSE +! Sets up use of szip compression +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! options_mask - A bit-mask conveying the desired SZIP options. +! Current valid values in Fortran are: +! H5_SZIP_EC_OM_F +! H5_SZIP_NN_OM_F +! pixels_per_block - szip parameters +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier + INTEGER, INTENT(IN) :: options_mask ! A bit-mask conveying the desired + ! SZIP options + ! Current valid values in Fortran are: + ! H5_SZIP_EC_OM_F + ! H5_SZIP_NN_OM_F + INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements + ! in each data block + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_szip_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_szip_c(prp_id, options_mask, pixels_per_block) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SZIP_C'::h5pset_szip_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, INTENT(IN) :: options_mask + INTEGER, INTENT(IN) :: pixels_per_block + END FUNCTION h5pset_szip_c + END INTERFACE + hdferr = h5pset_szip_c(prp_id, options_mask, pixels_per_block) + + END SUBROUTINE h5pset_szip_f + +!****s* H5P/h5pall_filters_avail_f +! NAME +! h5pall_filters_avail_f +! +! PURPOSE +! Checks if all filters set in the dataset creation +! property list are available +! +! INPUTS +! +! prp_id - data creation property list identifier +! OUTPUTS +! +! flag - .TRUE. if all filters are available +! .FALSE. otherwise +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pall_filters_avail_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(OUT) :: flag ! .TRUE. if all filters are available + ! .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status + +! INTEGER, EXTERNAL :: h5pall_filters_avail_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pall_filters_avail_c(prp_id, status) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PALL_FILTERS_AVAIL_C'::h5pall_filters_avail_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, INTENT(OUT) :: status + END FUNCTION h5pall_filters_avail_c + END INTERFACE + flag = .TRUE. + hdferr = h5pall_filters_avail_c(prp_id, status) + IF (status .EQ. 0 ) flag = .FALSE. + + END SUBROUTINE h5pall_filters_avail_f + +!****s* H5P/h5pget_filter_by_id_f +! NAME +! h5pget_filter_by_id_f +! +! PURPOSE +! Returns information about a filter in a pipeline +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! OUTPUTS +! +! filter_id - filter identifier +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! namelen - number of characters in the name buffer +! name - buffer to retrieve filter name +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_filter_by_id_f(prp_id, filter_id, flags, cd_nelmts, cd_values, namelen, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter_id ! Filter identifier + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + +! INTEGER, EXTERNAL :: h5pget_filter_by_id_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & + cd_values, namelen, name) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILTER_BY_ID_C'::h5pget_filter_by_id_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: name + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter_id + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values + INTEGER, INTENT(OUT) :: flags + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts + INTEGER(SIZE_T), INTENT(IN) :: namelen + CHARACTER(LEN=*), INTENT(OUT) :: name + END FUNCTION h5pget_filter_by_id_c + END INTERFACE + + hdferr = h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & + cd_values, namelen, name) + END SUBROUTINE h5pget_filter_by_id_f + +!****s* H5P/h5pmodify_filter_f +! NAME +! h5pmodify_filter_f +! +! PURPOSE +! Adds a filter to the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be modified +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pmodify_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter ! Filter to be modified + INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general + ! properties of the filter + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pmodify_filter_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PMODIFY_FILTER_C'::h5pmodify_filter_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + END FUNCTION h5pmodify_filter_c + END INTERFACE + + hdferr = h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) + END SUBROUTINE h5pmodify_filter_f + +!****s* H5P/h5premove_filter_f +! NAME +! h5premove_filter_f +! +! PURPOSE +! Delete one or more filters from the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be removed +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Quincey Koziol +! January 27 2004 +! +! Fortran90 Interface: + SUBROUTINE h5premove_filter_f(prp_id, filter, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property list + ! identifier + INTEGER, INTENT(IN) :: filter ! Filter to be removed + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5premove_filter_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5premove_filter_c(prp_id, filter) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREMOVE_FILTER_C'::h5premove_filter_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + END FUNCTION h5premove_filter_c + END INTERFACE + + hdferr = h5premove_filter_c(prp_id, filter) + END SUBROUTINE h5premove_filter_f + +!****s* H5P/H5Pget_attr_phase_change_f +! NAME +! H5Pget_attr_phase_change_f +! +! PURPOSE +! Retrieves attribute storage phase change thresholds +! +! INPUTS +! +! ocpl_id - Object (dataset or group) creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! (Default: 8) +! min_dense - Minimum number of attributes to be stored in dense storage +! (Default: 6) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage + ! (Default: 8) + INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage + ! (Default: 6) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ATTR_PHASE_CHANGE_C'::h5pget_attr_phase_change_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(OUT) :: max_compact + INTEGER, INTENT(OUT) :: min_dense + + END FUNCTION h5pget_attr_phase_change_c + END INTERFACE + + hdferr = h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) + END SUBROUTINE h5pget_attr_phase_change_f + +!****s* H5P/H5Pset_attr_creation_order_f +! NAME +! H5Pset_attr_creation_order_f +! +! PURPOSE +! Sets tracking and indexing of attribute creation order +! +! INPUTS +! +! ocpl_id - Object creation property list identifier +! crt_order_flags - Flags specifying whether to track and index attribute creation order +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_attr_creation_order_f(ocpl_id, crt_order_flags , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(IN) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ATTR_CREATION_ORDER_C'::h5pset_attr_creation_order_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(IN) :: crt_order_flags + + END FUNCTION H5Pset_attr_creation_order_c + END INTERFACE + + hdferr = H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) + END SUBROUTINE h5pset_attr_creation_order_f + +!****s* H5P/H5Pset_shared_mesg_nindexes_f +! NAME +! H5Pset_shared_mesg_nindexes_f +! +! PURPOSE +! Sets number of shared object header message indexes +! +! INPUTS +! +! plist_id - file creation property list +! nindexes - Number of shared object header message indexes to be available in files created with this property list +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shared_mesg_nindexes_f( plist_id, nindexes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list + INTEGER, INTENT(IN) :: nindexes ! Number of shared object header message indexes + ! available in files created WITH this property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_shared_mesg_nindexes_c(plist_id, nindexes) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHARED_MESG_NINDEXES_C'::h5pset_shared_mesg_nindexes_c + !DEC$ENDIF + + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: nindexes + + END FUNCTION H5pset_shared_mesg_nindexes_c + END INTERFACE + + hdferr = h5pset_shared_mesg_nindexes_c(plist_id, nindexes) + + END SUBROUTINE h5pset_shared_mesg_nindexes_f + +!****s* H5P/H5Pset_shared_mesg_index_f +! NAME +! H5Pset_shared_mesg_index_f +! +! PURPOSE +! Configures the specified shared object header message index +! +! INPUTS +! +! fcpl_id - File creation property list identifier. +! index_num - Index being configured. +! mesg_type_flags - Types of messages that should be stored in this index. +! min_mesg_size - Minimum message size. +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shared_mesg_index_f(fcpl_id, index_num, mesg_type_flags, min_mesg_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fcpl_id ! file creation property list + INTEGER, INTENT(IN) :: index_num ! Index being configured. + INTEGER, INTENT(IN) :: mesg_type_flags ! Types of messages that should be stored in this index. + INTEGER, INTENT(IN) :: min_mesg_size ! Minimum message size. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHARED_MESG_INDEX_C'::h5pset_shared_mesg_index_c + !DEC$ENDIF + + INTEGER(HID_T), INTENT(IN) :: fcpl_id + INTEGER, INTENT(IN) :: index_num + INTEGER, INTENT(IN) :: mesg_type_flags + INTEGER, INTENT(IN) :: min_mesg_size + + END FUNCTION H5pset_shared_mesg_index_c + END INTERFACE + + hdferr = h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) + + END SUBROUTINE h5pset_shared_mesg_index_f + +!****s* H5P/H5Pget_attr_creation_order_f +! NAME +! H5Pget_attr_creation_order_f +! +! PURPOSE +! Retrieves tracking and indexing settings for attribute creation order +! +! INPUTS +! +! ocpl_id - Object (group or dataset) creation property list identifier +! +! OUTPUTS +! +! crt_order_flags - Flags specifying whether to track and index attribute creation order +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_attr_creation_order_f(ocpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (group or dataset) creation property list identifier + INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ATTR_CREATION_ORDER_C'::h5pget_attr_creation_order_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(OUT) :: crt_order_flags + + END FUNCTION H5pget_attr_creation_order_c + END INTERFACE + + hdferr = h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) + + END SUBROUTINE h5pget_attr_creation_order_f + +!****s* H5P/H5Pset_libver_bounds_f +! NAME +! H5Pset_libver_bounds_f +! +! PURPOSE +! Sets bounds on library versions, and indirectly format versions, to be used when creating objects. +! +! INPUTS +! +! fapl_id - File access property list identifier +! low - The earliest version of the library that will be used for writing objects. +! high - The latest version of the library that will be used for writing objects. +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_libver_bounds_f(fapl_id, low, high, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER, INTENT(IN) :: low ! The earliest version of the library that will be used for writing objects. + ! Currently, low must be one of two pre-defined values: + ! HDF_LIBVER_EARLIEST_F + ! HDF_LIBVER_LATEST_F + INTEGER, INTENT(IN) :: high ! The latest version of the library that will be used for writing objects. + ! Currently, low must set to the pre-defined value: + ! HDF_LIBVER_LATEST_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_libver_bounds_c(fapl_id, low, high) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LIBVER_BOUNDS_C'::h5pset_libver_bounds_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(IN) :: low + INTEGER, INTENT(IN) :: high + + END FUNCTION H5pset_libver_bounds_c + END INTERFACE + + hdferr = h5pset_libver_bounds_c(fapl_id, low, high) + + END SUBROUTINE h5pset_libver_bounds_f + +!****s* H5P/H5Pset_link_creation_order_f +! NAME +! H5Pset_link_creation_order_f +! +! PURPOSE +! Sets creation order tracking and indexing for links in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! crt_order_flags - Creation order flag(s) +! +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! File access property list identifier + INTEGER, INTENT(IN) :: crt_order_flags ! Creation order flag(s) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_link_creation_order_c(gcpl_id, crt_order_flags) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LINK_CREATION_ORDER_C'::h5pset_link_creation_order_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: crt_order_flags + + END FUNCTION H5pset_link_creation_order_c + END INTERFACE + + hdferr = h5pset_link_creation_order_c(gcpl_id, crt_order_flags) + + END SUBROUTINE h5pset_link_creation_order_f + +!****s* H5P/H5Pget_link_phase_change_f +! NAME +! H5Pget_link_phase_change_f +! +! PURPOSE +! Queries the settings for conversion between compact and dense groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! min_dense - Minimum number of attributes to be stored in dense storage +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 20, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage + INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LINK_PHASE_CHANGE_C'::h5pget_link_phase_change_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: max_compact + INTEGER, INTENT(OUT) :: min_dense + + END FUNCTION h5pget_link_phase_change_c + END INTERFACE + + hdferr = h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) + END SUBROUTINE h5pget_link_phase_change_f + +!****s* H5P/H5Pget_obj_track_times_f +! NAME +! H5Pget_obj_track_times_f +! +! PURPOSE +! Returns whether times are tracked for an object. +! +! INPUTS +! +! plist_id - property list id +! flag - object timestamp setting +! .TRUE.,.FALSE. +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_obj_track_times_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(OUT) :: flag ! Object timestamp setting + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_obj_track_times_c(plist_id, status) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_OBJ_TRACK_TIMES_C'::h5pget_obj_track_times_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER, INTENT(OUT) :: status + END FUNCTION h5pget_obj_track_times_c + END INTERFACE + flag = .TRUE. + hdferr = h5pget_obj_track_times_c(plist_id, status) + IF(status.EQ.0) flag = .FALSE. + + END SUBROUTINE h5pget_obj_track_times_f + +!****s* H5P/H5Pset_obj_track_times_f +! NAME +! H5Pset_obj_track_times_f +! +! PURPOSE +! Set whether the birth, access, modification & change times for +! an object are stored. +! +! Birth time is the time the object was created. Access time is +! the last time that metadata or raw data was read from this +! object. Modification time is the last time the data for +! this object was changed (either writing raw data to a dataset +! or inserting/modifying/deleting a link in a group). Change +! time is the last time the metadata for this object was written +! (adding/modifying/deleting an attribute on an object, extending +! the size of a dataset, etc). +! +! If these times are not tracked, they will be reported as +! 12:00 AM UDT, Jan. 1, 1970 (i.e. 0 seconds past the UNIX +! epoch) when queried. +! +! INPUTS +! +! plist_id - property list id +! flag - object timestamp setting +! .TRUE.,.FALSE. +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_obj_track_times_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(IN) :: flag ! Object timestamp setting + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_obj_track_times_c(plist_id, status) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_OBJ_TRACK_TIMES_C'::h5pset_obj_track_times_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER, INTENT(IN) :: status + END FUNCTION h5pset_obj_track_times_c + END INTERFACE + + status = 0 + IF(flag) status = 1 + + hdferr = h5pset_obj_track_times_c(plist_id, status) + + END SUBROUTINE h5pset_obj_track_times_f + +!****s* H5P/H5Pset_create_inter_group_f +! NAME +! H5Pset_create_inter_group_f +! +! PURPOSE +! Specifies in property list whether to create missing intermediate groups. +! +! INPUTS +! +! lcpl_id - Link creation property list identifier +! crt_intermed_group - crt_intermed_group specifying whether +! to create intermediate groups upon the creation +! of an object +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! HISTORY +! The long subroutine name (>31) on older f90 compilers causes problems +! so had to shorten the name +! Fortran90 Interface: + SUBROUTINE h5pset_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier + INTEGER, INTENT(IN) :: crt_intermed_group ! specifying whether to create intermediate groups + ! upon the creation of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CREATE_INTER_GROUP_C'::h5pset_create_inter_group_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: lcpl_id + INTEGER, INTENT(IN) :: crt_intermed_group + END FUNCTION h5pset_create_inter_group_c + END INTERFACE + + hdferr = h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) + + END SUBROUTINE h5pset_create_inter_group_f + +!****s* H5P/H5Pget_link_creation_order_f +! NAME +! H5Pget_link_creation_order_f +! +! PURPOSE +! Queries whether link creation order is tracked and/or indexed in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! +! OUTPUTS +! +! crt_order_flags - Creation order flag(s) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: crt_order_flags ! Creation order flag(s) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_link_creation_order_c(gcpl_id, crt_order_flags) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LINK_CREATION_ORDER_C'::h5pget_link_creation_order_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: crt_order_flags + + END FUNCTION H5pget_link_creation_order_c + END INTERFACE + + hdferr = h5pget_link_creation_order_c(gcpl_id, crt_order_flags) + + END SUBROUTINE h5pget_link_creation_order_f + +!****s* H5P/H5Pset_char_encoding_f +! NAME +! H5Pset_char_encoding_f +! +! PURPOSE +! Sets the character encoding used to encode a string. +! +! INPUTS +! +! plist_id - Property list identifier +! encoding - Valid values for encoding are: +! H5T_CSET_ASCII_F -> US ASCII +! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding +! +! OUTPUTS +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_char_encoding_f(plist_id, encoding, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier + INTEGER, INTENT(IN) :: encoding ! String encoding character set: + ! H5T_CSET_ASCII_F -> US ASCII + ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_char_encoding_c(plist_id, encoding) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHAR_ENCODING_C'::h5pset_char_encoding_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: encoding + + END FUNCTION H5pset_char_encoding_c + END INTERFACE + + hdferr = h5pset_char_encoding_c(plist_id, encoding) + + END SUBROUTINE h5pset_char_encoding_f + +!****s* H5P/H5Pget_char_encoding_f +! NAME +! H5Pget_char_encoding_f +! +! PURPOSE +! Retrieves the character encoding used to create a string +! +! INPUTS +! +! plist_id - Property list identifier +! +! OUTPUTS +! +! encoding - Valid values for encoding are: +! H5T_CSET_ASCII_F -> US ASCII +! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_char_encoding_f(plist_id, encoding, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier + + INTEGER, INTENT(OUT) :: encoding ! Valid values for encoding are: + ! H5T_CSET_ASCII_F -> US ASCII + ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_char_encoding_c(plist_id, encoding) + + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHAR_ENCODING_C'::h5pget_char_encoding_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: encoding + + END FUNCTION H5pget_char_encoding_c + END INTERFACE + + hdferr = h5pget_char_encoding_c(plist_id, encoding) + + END SUBROUTINE h5pget_char_encoding_f + +!****s* H5P/h5pset_copy_object_f +! NAME +! h5pset_copy_object_f +! +! PURPOSE +! Sets properties to be used when an object is copied. +! +! INPUTS +! +! ocp_plist_id - Object copy property list identifier +! copy_options - Copy option(s) to be set +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_copy_object_f(ocp_plist_id, copy_options, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier + INTEGER, INTENT(IN) :: copy_options ! Copy option(s) to be set, valid options are: + ! H5O_COPY_SHALLOW_HIERARCHY_F + ! H5O_COPY_EXPAND_SOFT_LINK_F + ! H5O_COPY_EXPAND_EXT_LINK_F + ! H5O_COPY_EXPAND_REFERENCE_F + ! H5O_COPY_WITHOUT_ATTR_FLAG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_copy_object_c(ocp_plist_id, copy_options) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_COPY_OBJECT_C'::h5pset_copy_object_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id + INTEGER, INTENT(IN) :: copy_options + END FUNCTION h5pset_copy_object_c + END INTERFACE + hdferr = h5pset_copy_object_c(ocp_plist_id, copy_options) + END SUBROUTINE h5pset_copy_object_f + +!****s* H5P/h5pget_copy_object_f +! NAME +! h5pget_copy_object_f +! +! PURPOSE +! Retrieves the properties to be used when an object is copied. +! +! INPUTS +! +! ocp_plist_id - Object copy property list identifier +! OUTPUTS +! +! copy_options - Copy option(s) to be get +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_copy_object_f(ocp_plist_id, copy_options, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier + INTEGER, INTENT(OUT) :: copy_options ! Valid copy options returned are: + ! H5O_COPY_SHALLOW_HIERARCHY_F + ! H5O_COPY_EXPAND_SOFT_LINK_F + ! H5O_COPY_EXPAND_EXT_LINK_F + ! H5O_COPY_EXPAND_REFERENCE_F + ! H5O_COPY_WITHOUT_ATTR_FLAG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_copy_object_c(ocp_plist_id, copy_options) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_COPY_OBJECT_C'::h5pget_copy_object_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id + INTEGER, INTENT(OUT) :: copy_options + END FUNCTION h5pget_copy_object_c + END INTERFACE + hdferr = h5pget_copy_object_c(ocp_plist_id, copy_options) + END SUBROUTINE h5pget_copy_object_f + +!****s* H5P/h5pget_data_transform_f +! NAME +! h5pget_data_transform_f +! +! PURPOSE +! Retrieves a data transform expression. +! +! INPUTS +! +! plist_id - Identifier of the property list or class +! OUTPUTS +! +! expression - buffer to hold transform expression +! hdferr - Error code +! Success: Actual lenght of the expression +! If provided buffer "expression" is +! smaller, than expression will be +! truncated to fit into +! provided user buffer +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 19, 2008 +! +! HISTORY +! +! Should hdferr return just 0 or 1 and add another arguement for the size? +! Fortran90 Interface: +SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class + CHARACTER(LEN=*), INTENT(OUT) :: expression ! Buffer to hold transform expression + INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: size ! Registered size of the transform expression + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: expression_len + INTEGER(SIZE_T) :: size_default + + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_data_transform_c(plist_id, expression, expression_len, size_default) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_DATA_TRANSFORM_C'::h5pget_data_transform_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: expression + INTEGER(HID_T), INTENT(IN) :: plist_id + CHARACTER(LEN=*), INTENT(OUT) :: expression + INTEGER(SIZE_T) :: size_default + INTEGER :: expression_len + END FUNCTION h5pget_data_transform_c + END INTERFACE + + size_default = 0 + expression_len = LEN(expression) + + hdferr = h5pget_data_transform_c(plist_id, expression, expression_len, size_default) + + IF(present(size)) size = size_default + + END SUBROUTINE h5pget_data_transform_f + +!****s* H5P/h5pset_data_transform_f +! NAME +! h5pset_data_transform_f +! +! PURPOSE +! Sets a data transform expression. +! +! INPUTS +! +! plist_id - Identifier of the property list or class +! expression - Buffer to hold transform expression +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 19, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_data_transform_f(plist_id, expression, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class + CHARACTER(LEN=*), INTENT(IN) :: expression ! Buffer to hold transform expression + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: expression_len + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_data_transform_c(plist_id, expression, expression_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_DATA_TRANSFORM_C'::h5pset_data_transform_c + !DEC$ENDIF + !DEC$ATTRIBUTES reference :: expression + INTEGER(HID_T), INTENT(IN) :: plist_id + CHARACTER(LEN=*), INTENT(IN) :: expression + INTEGER :: expression_len + END FUNCTION h5pset_data_transform_c + END INTERFACE + + expression_len = LEN(expression) + hdferr = h5pset_data_transform_c(plist_id, expression, expression_len) + + END SUBROUTINE h5pset_data_transform_f + +!****s* H5P/H5Pget_local_heap_size_hint_f +! NAME +! H5Pget_local_heap_size_hint_f +! +! PURPOSE +! Queries the local heap size hint for original-style groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! size_hint - Hint for size of local heap +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size_hint ! Hint for size of local heap + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_local_heap_size_hint_c(gcpl_id, size_hint) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LOCAL_HEAP_SIZE_HINT_C'::h5pget_local_heap_size_hint_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(SIZE_T), INTENT(OUT) :: size_hint + END FUNCTION H5Pget_local_heap_size_hint_c + END INTERFACE + + hdferr = H5Pget_local_heap_size_hint_c(gcpl_id, size_hint) + + END SUBROUTINE h5pget_local_heap_size_hint_f + +!****s* H5P/H5Pget_est_link_info_f +! NAME +! H5Pget_est_link_info_f +! +! PURPOSE +! Queries data required to estimate required local heap or object header size. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! est_num_entries - Estimated number of links to be inserted into group +! est_name_len - Estimated average length of link names +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: est_num_entries ! Estimated number of links to be inserted into group + INTEGER, INTENT(OUT) :: est_name_len ! Estimated average length of link names + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EST_LINK_INFO_C'::h5pget_est_link_info_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: est_num_entries + INTEGER, INTENT(OUT) :: est_name_len + END FUNCTION h5pget_est_link_info_c + END INTERFACE + + hdferr = h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + + END SUBROUTINE h5pget_est_link_info_f + +!****s* H5P/H5Pset_local_heap_size_hint_f +! NAME +! H5Pset_local_heap_size_hint_f +! +! PURPOSE +! Sets the local heap size hint for original-style groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! size_hint - Hint for size of local heap +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size_hint ! Hint for size of local heap + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_local_heap_size_hint_c(gcpl_id, size_hint) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LOCAL_HEAP_SIZE_HINT_C'::h5pset_local_heap_size_hint_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(SIZE_T), INTENT(IN) :: size_hint + END FUNCTION h5pset_local_heap_size_hint_c + END INTERFACE + + hdferr = H5Pset_local_heap_size_hint_c(gcpl_id, size_hint) + + END SUBROUTINE h5pset_local_heap_size_hint_f + +!****s* H5P/h5pset_est_link_info_f +! NAME +! h5pset_est_link_info_f +! +! PURPOSE +! Sets estimated number of links and length of link names in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! est_num_entries - Estimated number of links to be inserted into group +! est_name_len - Estimated average length of link names +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(IN) :: est_num_entries ! Estimated number of links to be inserted into group + INTEGER, INTENT(IN) :: est_name_len ! Estimated average length of link names + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EST_LINK_INFO_C'::h5pset_est_link_info_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: est_num_entries + INTEGER, INTENT(IN) :: est_name_len + END FUNCTION h5pset_est_link_info_c + END INTERFACE + + hdferr = H5Pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + + END SUBROUTINE h5pset_est_link_info_f + +!****s* H5P/h5pset_link_phase_change_f +! NAME +! h5pset_link_phase_change_f +! +! PURPOSE +! Sets the parameters for conversion between compact and dense groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! max_compact - Maximum number of attributes to be stored in compact storage +! min_dense - Minimum number of attributes to be stored in dense storage +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage + INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LINK_PHASE_CHANGE_C'::h5pset_link_phase_change_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: max_compact + INTEGER, INTENT(IN) :: min_dense + + END FUNCTION h5pset_link_phase_change_c + END INTERFACE + + hdferr = h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) + END SUBROUTINE h5pset_link_phase_change_f + +!****s* H5P/h5pset_fapl_direct_f +! NAME +! h5pset_fapl_direct_f +! +! PURPOSE +! Sets up use of the direct I/O driver. +! +! INPUTS +! +! fapl_id - File access property list identifier +! alignment - Required memory alignment boundary +! block_size - File system block size +! cbuf_size - Copy buffer size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: alignment ! Required memory alignment boundary! + INTEGER(SIZE_T), INTENT(IN) :: block_size ! File system block size + INTEGER(SIZE_T), INTENT(IN) :: cbuf_size ! Copy buffer size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_DIRECT_C'::h5pset_fapl_direct_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(SIZE_T), INTENT(IN) :: alignment + INTEGER(SIZE_T), INTENT(IN) :: block_size + INTEGER(SIZE_T), INTENT(IN) :: cbuf_size + END FUNCTION h5pset_fapl_direct_c + END INTERFACE + + hdferr = H5Pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + END SUBROUTINE h5pset_fapl_direct_f + +!****s* H5P/h5pget_fapl_direct_f +! NAME +! h5pget_fapl_direct_f +! +! PURPOSE +! Gets up use of the direct I/O driver. +! +! INPUTS +! +! fapl_id - File access property list identifier +! OUTPUTS +! +! alignment - Required memory alignment boundary +! block_size - File system block size +! cbuf_size - Copy buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: alignment ! Required memory alignment boundary! + INTEGER(SIZE_T), INTENT(OUT) :: block_size ! File system block size + INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size ! Copy buffer size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_DIRECT_C'::h5pget_fapl_direct_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(SIZE_T), INTENT(OUT) :: alignment + INTEGER(SIZE_T), INTENT(OUT) :: block_size + INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size + END FUNCTION h5pget_fapl_direct_c + END INTERFACE + + hdferr = H5Pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + END SUBROUTINE h5pget_fapl_direct_f + +!****s* H5P/H5Pset_attr_phase_change_f +! NAME +! H5Pset_attr_phase_change_f +! +! PURPOSE +! Sets attribute storage phase change thresholds. +! +! INPUTS +! +! ocpl_id - Object (dataset or group) creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! (Default: 8) +! min_dense - Minimum number of attributes to be stored in dense storage +! (Default: 6) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage + !(Default: 8) + INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage + ! (Default: 6) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ATTR_PHASE_CHANGE_C'::h5pset_attr_phase_change_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(IN) :: max_compact + INTEGER, INTENT(IN) :: min_dense + + END FUNCTION h5pset_attr_phase_change_c + END INTERFACE + + hdferr = h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) + + + END SUBROUTINE h5pset_attr_phase_change_f + +!****s* H5P/H5Pset_nbit_f +! NAME +! H5Pset_nbit_f +! +! PURPOSE +! Sets up the use of the N-Bit filter. +! +! Inputs: +! plist_id - Dataset creation property list identifier. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_nbit_f(plist_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION H5Pset_nbit_c(plist_id) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_NBIT_C'::h5pset_nbit_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + END FUNCTION H5Pset_nbit_c + END INTERFACE + + hdferr = H5Pset_nbit_c(plist_id) + + END SUBROUTINE h5pset_nbit_f + +!****s* H5P/h5pset_scaleoffset_f +! NAME +! h5pset_scaleoffset_f +! +! PURPOSE +! Sets up the use of the scale-offset filter. +! +! Inputs: +! plist_id - Dataset creation property list identifier. +! scale_type - Flag indicating compression method. Valid values: +! H5Z_SO_FLOAT_DSCALE_F +! H5Z_SO_FLOAT_ESCALE_F +! H5Z_SO_INT_F +! +! scale_factor - Parameter related to scale. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_scaleoffset_f(plist_id, scale_type, scale_factor, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER , INTENT(IN) :: scale_type + INTEGER , INTENT(IN) :: scale_factor + INTEGER , INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5pset_scaleoffset_c(plist_id, scale_type, scale_factor) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SCALEOFFSET_C'::h5pset_scaleoffset_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: scale_type + INTEGER, INTENT(IN) :: scale_factor + END FUNCTION h5pset_scaleoffset_c + END INTERFACE + + hdferr = H5Pset_scaleoffset_c(plist_id, scale_type, scale_factor) + + END SUBROUTINE h5pset_scaleoffset_f + +!****s* H5P/h5pset_nlinks_f +! NAME +! h5pset_nlinks_f +! +! PURPOSE +! Sets maximum number of soft or user-defined link traversals. +! +! INPUTS +! +! lapl_id - File access property list identifier +! nlinks - Maximum number of links to traverse +! +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 24, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_nlinks_f(lapl_id, nlinks, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: nlinks ! Maximum number of links to traverse + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_nlinks_c(lapl_id, nlinks) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_NLINKS_C'::h5pset_nlinks_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: lapl_id + INTEGER(SIZE_T), INTENT(IN) :: nlinks + END FUNCTION h5pset_nlinks_c + END INTERFACE + + hdferr = h5pset_nlinks_c(lapl_id, nlinks) + + END SUBROUTINE h5pset_nlinks_f + +!****s* H5P/h5pget_nlinks_f +! NAME +! h5pget_nlinks_f +! +! PURPOSE +! Gets maximum number of soft or user-defined link traversals. +! +! INPUTS +! +! lapl_id - File access property list identifier +! nlinks - Maximum number of links to traverse +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 24, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nlinks_f(lapl_id, nlinks, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: nlinks ! Maximum number of links to traverse + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_nlinks_c(lapl_id, nlinks) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NLINKS_C'::h5pget_nlinks_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: lapl_id + INTEGER(SIZE_T), INTENT(OUT) :: nlinks + END FUNCTION h5pget_nlinks_c + END INTERFACE + + hdferr = h5pget_nlinks_c(lapl_id, nlinks) + + END SUBROUTINE h5pget_nlinks_f + +!****s* H5P/H5Pget_create_inter_group_f +! NAME +! H5Pget_create_inter_group_f +! +! PURPOSE +! Determines whether property is set to enable creating missing intermediate groups. +! +! INPUTS +! +! lcpl_id - Link creation property list identifier +! crt_intermed_group - Specifying whether to create intermediate groups upon +! the creation of an object +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 4, 2008 +! +! HISTORY +! +! The long subroutine name (>31) on older f90 compilers causes problems +! so the name was shortened +! Fortran90 Interface: + SUBROUTINE h5pget_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier + INTEGER, INTENT(IN) :: crt_intermed_group ! Flag specifying whether to create intermediate groups + ! upon creation of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CREATE_INTER_GROUP_C'::h5pget_create_inter_group_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: lcpl_id + INTEGER, INTENT(IN) :: crt_intermed_group + END FUNCTION h5pget_create_inter_group_c + END INTERFACE + + hdferr = h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) + + END SUBROUTINE h5pget_create_inter_group_f + +!****s* H5P/H5Pset_chunk_cache_f +! NAME +! H5Pset_chunk_cache_f +! +! PURPOSE +! Set the number of objects in the meta data cache and the +! maximum number of chunks and bytes in the raw data chunk cache. +! Once set, these values will override the values in the file access +! property list. Each of these values can be individually unset +! (or not set at all) by passing the macros: +! H5D_CHUNK_CACHE_NSLOTS_DFLT_F, +! H5D_CHUNK_CACHE_NBYTES_DFLT_F, and/or +! H5D_CHUNK_CACHE_W0_DFLT_F +! as appropriate. +! +! The RDCC_W0 value should be between 0 and 1 inclusive and +! indicates how much chunks that have been fully read or fully +! written are favored for preemption. A value of zero means +! fully read or written chunks are treated no differently than +! other chunks (the preemption is strictly LRU) while a value +! of one means fully read chunks are always preempted before +! other chunks. +! +! INPUTS +! +! dapl_id - Dataset access property list identifier. +! rdcc_nslots - The number of chunk slots in the raw data chunk cache for this dataset. +! rdcc_nbytes - The total size of the raw data chunk cache for this dataset. +! rdcc_w0 - The chunk preemption policy for this dataset. +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! +! HISTORY +! +! Fortran90 Interface: + SUBROUTINE h5pset_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data + ! chunk cache for this dataset. + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache + ! for this dataset. + REAL, INTENT(IN) :: rdcc_w0 ! The chunk preemption policy for this dataset. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHUNK_CACHE_C'::h5pset_chunk_cache_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: dapl_id + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes + REAL, INTENT(IN) :: rdcc_w0 + END FUNCTION h5pset_chunk_cache_c + END INTERFACE + + hdferr = h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + + END SUBROUTINE h5pset_chunk_cache_f + +!****s* H5P/H5Pget_chunk_cache_f +! NAME +! H5Pget_chunk_cache_f +! +! PURPOSE +! Retrieves the maximum possible number of elements in the meta +! data cache and the maximum possible number of elements and +! bytes and the RDCC_W0 value in the raw data chunk cache. Any +! (or all) arguments may be null pointers in which case the +! corresponding datum is not returned. If these properties have +! not been set on this property list, the default values for a +! file access property list are returned. +! +! INPUTS +! +! dapl_id - Dataset access property list identifier. +! OUTPUTS +! +! rdcc_nslots - Number of chunk slots in the raw data chunk cache hash table. +! rdcc_nbytes - Total size of the raw data chunk cache, in bytes. +! rdcc_w0 - Preemption policy. +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! +! HISTORY +! +! Fortran90 Interface: + SUBROUTINE h5pget_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots ! Number of chunk slots in the raw data chunk cache hash table. + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. + REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + USE H5GLOBAL + !DEC$IF DEFINED(HDF5F90_WINDOWS) + !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHUNK_CACHE_C'::h5pget_chunk_cache_c + !DEC$ENDIF + INTEGER(HID_T), INTENT(IN) :: dapl_id + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes + REAL, INTENT(OUT) :: rdcc_w0 + END FUNCTION h5pget_chunk_cache_c + END INTERFACE + + hdferr = h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + + END SUBROUTINE h5pget_chunk_cache_f + +END MODULE H5P + + + |