diff options
Diffstat (limited to 'fortran/test/tH5P.f90')
| -rw-r--r-- | fortran/test/tH5P.f90 | 122 |
1 files changed, 61 insertions, 61 deletions
diff --git a/fortran/test/tH5P.f90 b/fortran/test/tH5P.f90 index 3063842..6a49f72 100644 --- a/fortran/test/tH5P.f90 +++ b/fortran/test/tH5P.f90 @@ -1,4 +1,4 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! Copyright by The HDF Group. * ! Copyright by the Board of Trustees of the University of Illinois. * ! All rights reserved. * @@ -11,25 +11,25 @@ ! is linked from the top-level documents page. It can also be found at * ! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * ! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! SUBROUTINE external_test(cleanup, total_error) -! This subroutine tests following functionalities: +! This subroutine tests following functionalities: ! h5pset_external_f, h5pget_external_count_f, ! h5pget_external_f - USE HDF5 ! This module contains all necessary modules - + USE HDF5 ! This module contains all necessary modules + IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup - INTEGER, INTENT(OUT) :: total_error + INTEGER, INTENT(OUT) :: total_error CHARACTER(LEN=8), PARAMETER :: filename = "external" CHARACTER(LEN=80) :: fix_filename - INTEGER(HID_T) :: file_id - INTEGER(HID_T) :: plist_id - INTEGER(HID_T) :: space_id + INTEGER(HID_T) :: file_id + INTEGER(HID_T) :: plist_id + INTEGER(HID_T) :: space_id INTEGER(HID_T) :: dataset_id INTEGER(HSIZE_T), DIMENSION(1) :: cur_size !data space current size INTEGER(HSIZE_T), DIMENSION(1) :: max_size !data space maximum size @@ -38,7 +38,7 @@ INTEGER(HSIZE_T) :: file_size !sizeof external file segment INTEGER :: error !error code INTEGER(SIZE_T) :: int_size !size of integer - INTEGER(HSIZE_T) :: file_bytes !Number of bytes reserved + INTEGER(HSIZE_T) :: file_bytes !Number of bytes reserved !in the file for the data INTEGER :: RANK = 1 !dataset rank INTEGER :: count !number of external files for the @@ -51,7 +51,7 @@ ! !Create file "external.h5" using default properties. - ! + ! CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) if (error .ne. 0) then write(*,*) "Cannot modify filename" @@ -80,7 +80,7 @@ max_size(1) = 100; call h5tget_size_f(H5T_NATIVE_INTEGER, int_size, error) CALL check("h5tget_size_f",error,total_error) - file_size = int_size * max_size(1); + file_size = int_size * max_size(1); CALL h5pset_external_f(plist_id, "ext1.data", 0, file_size, error) CALL check("h5pset_external_f",error,total_error) CALL h5screate_simple_f(RANK, cur_size, space_id, error, max_size) @@ -88,7 +88,7 @@ CALL h5dcreate_f(file_id, "dset1", H5T_NATIVE_INTEGER, space_id, & dataset_id, error, plist_id) CALL check("h5dcreate_f", error, total_error) - + CALL h5dclose_f(dataset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5pclose_f(plist_id, error) @@ -100,8 +100,8 @@ CALL h5fopen_f(fix_filename, H5F_ACC_RDWR_F, file_id, error) CALL h5dopen_f(file_id, "dset1", dataset_id, error) CALL check("h5dopen_f",error,total_error) - - ! Read dataset creation information + + ! Read dataset creation information CALL h5dget_create_plist_f(dataset_id, plist_id, error) CALL check("h5dget_create_plist_f",error,total_error) CALL h5pget_external_count_f(plist_id, count, error) @@ -123,7 +123,7 @@ write (*,*) "got external file size is not correct" total_error = total_error + 1 end if - + CALL h5dclose_f(dataset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5pclose_f(plist_id, error) @@ -136,27 +136,27 @@ CALL check("h5_cleanup_f", error, total_error) RETURN END SUBROUTINE external_test - + SUBROUTINE multi_file_test(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules + USE HDF5 ! This module contains all necessary modules IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup - INTEGER, INTENT(OUT) :: total_error + INTEGER, INTENT(OUT) :: total_error CHARACTER(LEN=9), PARAMETER :: filename = "multidset" ! File name - CHARACTER(LEN=80) :: fix_filename + CHARACTER(LEN=80) :: fix_filename CHARACTER(LEN=4), PARAMETER :: dsetname = "dset" ! Dataset name - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HID_T) :: dset_id ! Dataset identifier + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HID_T) :: dset_id ! Dataset identifier INTEGER(HID_T) :: dspace_id ! Dataspace identifier INTEGER(HID_T) :: dtype_id ! Datatype identifier INTEGER(HID_T) :: fapl, fapl_1 ! File access property list identifier INTEGER, DIMENSION(0:H5FD_MEM_NTYPES_F-1) :: memb_map, memb_map_out INTEGER(HID_T), DIMENSION(0:H5FD_MEM_NTYPES_F-1) :: memb_fapl, memb_fapl_out CHARACTER(LEN=20), DIMENSION(0:H5FD_MEM_NTYPES_F-1) :: memb_name, memb_name_out - REAL, DIMENSION(0:H5FD_MEM_NTYPES_F-1) :: memb_addr, memb_addr_out + REAL, DIMENSION(0:H5FD_MEM_NTYPES_F-1) :: memb_addr, memb_addr_out !INTEGER(HADDR_T), DIMENSION(0:H5FD_MEM_NTYPES_F) :: memb_addr LOGICAL :: relax = .TRUE. LOGICAL :: relax_out = .TRUE. @@ -208,7 +208,7 @@ ! ! Create a new file using default properties. - ! + ! CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) if (error .ne. 0) then write(*,*) "Cannot modify filename" @@ -227,19 +227,19 @@ write(*,*) "Wrong value for driver" endif ! - ! Let's check h5pget(set)cache_f APIs here for now + ! Let's check h5pget(set)cache_f APIs here for now ! CALL h5pget_cache_f(fapl, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, & rdcc_w0, error) CALL check("h5pget_cache_f", error, total_error) - + ! Set cache to some number ! rdcc_nbytes = 1024*1024 CALL h5pset_cache_f(fapl, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, & rdcc_w0, error) CALL check("h5pset_cache_f", error, total_error) - + CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error, access_prp = fapl) CALL check("h5fcreate_f", error, total_error) if(error .ne. 0) then @@ -247,10 +247,10 @@ total_error = 1 call h5pclose_f(fapl, error) return - endif + endif - ! + ! ! Create the dataspace. ! CALL h5screate_simple_f(rank, dims, dspace_id, error) @@ -268,14 +268,14 @@ ! Write the dataset. ! data_dims(1) = 4 - data_dims(2) = 6 + data_dims(2) = 6 CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, dset_data, data_dims, error) CALL check("h5dwrite_f", error, total_error) - ! + ! ! End access to the dataset and release resources used by it. - ! + ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) @@ -285,14 +285,14 @@ CALL h5sclose_f(dspace_id, error) CALL check("h5sclose_f", error, total_error) - ! + ! ! Close the file. ! CALL h5fclose_f(file_id, error) CALL check("h5fclose_f", error, total_error) CALL h5pclose_f(fapl, error) CALL check("h5pclose_f", error, total_error) - ! + ! ! Open the existing file. ! CALL h5pcreate_f(H5P_FILE_ACCESS_F, fapl, error) @@ -314,19 +314,19 @@ ! CALL check("h5pget_fapl_multi_f", error, total_error) ! - ! Open the existing dataset. + ! Open the existing dataset. ! CALL h5dopen_f(file_id, dsetname, dset_id, error) CALL check("h5dopen_f", error, total_error) ! - ! Get the dataset type. + ! Get the dataset type. ! CALL h5dget_type_f(dset_id, dtype_id, error) CALL check("h5dget_type_f", error, total_error) ! - ! Get the data space. + ! Get the data space. ! CALL h5dget_space_f(dset_id, dspace_id, error) CALL check("h5dget_space_f", error, total_error) @@ -339,19 +339,19 @@ ! !Compare the data. - ! + ! do i = 1, 4 do j = 1, 6 - IF (data_out(i,j) .NE. dset_data(i, j)) THEN + IF (data_out(i,j) .NE. dset_data(i, j)) THEN write(*, *) "dataset test error occured" write(*,*) "data read is not the same as the data writen" END IF - end do + end do end do - ! + ! ! End access to the dataset and release resources used by it. - ! + ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) @@ -366,7 +366,7 @@ ! CALL h5tclose_f(dtype_id, error) CALL check("h5tclose_f", error, total_error) - ! + ! ! Close the file. ! CALL h5fclose_f(file_id, error) @@ -377,7 +377,7 @@ CALL check("h5pclose_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + IF(cleanup) CALL h5_cleanup_f(filename//'.h5-b', H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename//'.h5-g', H5P_DEFAULT_F, error) @@ -390,7 +390,7 @@ CALL check("h5_cleanup_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename//'.h5-s', H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + RETURN END SUBROUTINE multi_file_test @@ -412,14 +412,14 @@ ! April 16, 2009 !------------------------------------------------------------------------- ! -SUBROUTINE test_chunk_cache(cleanup, total_error) +SUBROUTINE test_chunk_cache(cleanup, total_error) + + USE HDF5 ! This module contains all necessary modules - USE HDF5 ! This module contains all necessary modules - IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(OUT) :: total_error - + CHARACTER(LEN=14), PARAMETER :: filename="chunk_cache" CHARACTER(LEN=80) :: fix_filename INTEGER(hid_t) :: fid = -1 ! /* File ID */ @@ -457,7 +457,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) ! Verify that H5Pget_chunk_cache(dapl) returns the same values as are in ! the default fapl. - ! + ! CALL H5Pget_cache_f(fapl_def, mdc_nelmts, nslots_1, nbytes_1, w0_1, error) CALL check("H5Pget_cache_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl1, nslots_4, nbytes_4, w0_4, error) @@ -514,7 +514,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) ! /* Create dataset with default dapl */ CALL H5Dcreate_f(fid, "dset", H5T_NATIVE_INTEGER, sid, dsid, error, dcpl, H5P_DEFAULT_F, dapl1) CALL check("H5Pcreate_f", error, total_error) - + ! /* Retrieve dapl from dataset, verify cache values are the same as on fapl_local */ CALL H5Dget_access_plist_f(dsid, dapl2, error) CALL check("H5Dget_access_plist_f", error, total_error) @@ -526,7 +526,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) ENDIF CALL H5Pclose_f(dapl2,error); CALL check("H5Pclose_f", error, total_error) - + ! Set new values on dapl1. nbytes will be set to default, so the file ! property will override this setting @@ -601,7 +601,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Pset_cache_f", error, total_error) ! Close and reopen file with new fapl_local - + CALL H5Dclose_f(dsid, error); CALL check("H5Dclose_f", error, total_error) CALL H5Fclose_f(fid,error); CALL check("h5fclose_f", error, total_error) @@ -611,12 +611,12 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) ! Verify that dapl2 retrieved earlier (using values from the old fapl) ! sets its values in the new file (test use of H5Dopen2 with a dapl) ! - + CALL h5dopen_f (fid, "dset", dsid, error, dapl2) CALL check("h5dopen_f", error, total_error) - + CALL H5Pclose_f(dapl2,error); CALL check("H5Pclose_f", error, total_error) ! Close dapl2, to avoid id leak - + CALL H5Dget_access_plist_f(dsid, dapl2, error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) @@ -654,11 +654,11 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL H5Dclose_f(dsid, error); CALL check("H5Dclose_f", error, total_error) CALL H5Sclose_f(sid,error); CALL check("H5Sclose_f", error, total_error) - CALL H5Pclose_f(fapl_local,error); CALL check("H5Pclose_f", error, total_error) - CALL H5Pclose_f(fapl_def,error); CALL check("H5Pclose_f", error, total_error) - CALL H5Pclose_f(dapl1,error); CALL check("H5Pclose_f", error, total_error) - CALL H5Pclose_f(dapl2,error); CALL check("H5Pclose_f", error, total_error) - CALL H5Pclose_f(dcpl,error); CALL check("H5Pclose_f", error, total_error) + CALL H5Pclose_f(fapl_local,error); CALL check("H5Pclose_f", error, total_error) + CALL H5Pclose_f(fapl_def,error); CALL check("H5Pclose_f", error, total_error) + CALL H5Pclose_f(dapl1,error); CALL check("H5Pclose_f", error, total_error) + CALL H5Pclose_f(dapl2,error); CALL check("H5Pclose_f", error, total_error) + CALL H5Pclose_f(dcpl,error); CALL check("H5Pclose_f", error, total_error) CALL H5Fclose_f(fid,error); CALL check("H5Fclose_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) |