diff options
Diffstat (limited to 'fortran/test/tf.f90')
| -rw-r--r-- | fortran/test/tf.f90 | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/fortran/test/tf.f90 b/fortran/test/tf.f90 new file mode 100644 index 0000000..450daf2 --- /dev/null +++ b/fortran/test/tf.f90 @@ -0,0 +1,393 @@ +!****h* root/fortran/test/tf.f90 +! +! NAME +! tf.f90 +! +! FUNCTION +! Contains subroutines which are needed in all the hdf5 fortran tests +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! CONTAINS SUBROUTINES +! write_test_status, check, verify, verifyLogical, verifyString, h5_fixname_f, +! h5_cleanup_f, h5_exit_f, h5_env_nocleanup_f,dreal_eqv +! +!***** +MODULE TH5_MISC + + USE TH5_MISC_PROVISIONAL + + IMPLICIT NONE + +CONTAINS + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: dreal_eq +!DEC$endif + LOGICAL FUNCTION dreal_eq(a,b) + + ! Check if two double precision reals are equivalent + REAL(dp), INTENT (in):: a,b + REAL(dp), PARAMETER :: eps = 1.e-8 + dreal_eq = ABS(a-b) .LT. eps + + END FUNCTION dreal_eq + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verify_real_kind_7 +!DEC$endif + SUBROUTINE verify_real_kind_7(string,value,correct_value,total_error) + USE HDF5 + INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors + CHARACTER(LEN=*) :: string + REAL(real_kind_7) :: value, correct_value + INTEGER :: total_error + IF (.NOT.dreal_eq( REAL(value,dp), REAL(correct_value, dp)) ) THEN + total_error=total_error+1 + WRITE(*,*) "ERROR: INCORRECT REAL VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verify_real_kind_7 + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: write_test_status +!DEC$endif + SUBROUTINE write_test_status( test_result, test_title, total_error) + + ! Writes the results of the tests + + IMPLICIT NONE + + INTEGER, INTENT(IN) :: test_result ! negative, --skip -- + ! 0 , passed + ! positive, failed + + CHARACTER(LEN=*), INTENT(IN) :: test_title ! Short description of test + INTEGER, INTENT(INOUT) :: total_error ! Accumulated error + +! Controls the output style for reporting test results + + CHARACTER(LEN=8) :: error_string + CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' + CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' + CHARACTER(LEN=8), PARAMETER :: skip = '--SKIP--' + + + error_string = failure + IF (test_result == 0) THEN + error_string = success + ELSE IF (test_result == -1) THEN + error_string = skip + ENDIF + + WRITE(*, fmt = '(A, T72, A)') test_title, error_string + + IF(test_result.GT.0) total_error = total_error + test_result + + END SUBROUTINE write_test_status + + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: check +!DEC$endif + SUBROUTINE check(string,error,total_error) + CHARACTER(LEN=*) :: string + INTEGER :: error, total_error + IF (error .LT. 0) THEN + total_error=total_error+1 + WRITE(*,*) string, " FAILED" + ENDIF + RETURN + END SUBROUTINE check + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verify +!DEC$endif + SUBROUTINE VERIFY(string,value,correct_value,total_error) + CHARACTER(LEN=*) :: string + INTEGER :: value, correct_value, total_error + IF (value .NE. correct_value) THEN + total_error=total_error+1 + WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verify + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verify_INTEGER_HID_T +!DEC$endif + SUBROUTINE verify_INTEGER_HID_T(string,value,correct_value,total_error) + USE HDF5 + CHARACTER(LEN=*) :: string + INTEGER(HID_T) :: value, correct_value + INTEGER :: total_error + IF (value .NE. correct_value) THEN + total_error=total_error+1 + WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verify_INTEGER_HID_T + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verify_Fortran_INTEGER_4 +!DEC$endif + SUBROUTINE verify_Fortran_INTEGER_4(string,value,correct_value,total_error) + USE HDF5 + INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(Fortran_INTEGER_4) ! should map to INTEGER*4 on most modern processors + CHARACTER(LEN=*) :: string + INTEGER(int_kind_8) :: value, correct_value + INTEGER :: total_error + IF (value .NE. correct_value) THEN + total_error=total_error+1 + WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verify_Fortran_INTEGER_4 + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verifyLogical +!DEC$endif + SUBROUTINE verifyLogical(string,value,correct_value,total_error) + CHARACTER(LEN=*) :: string + LOGICAL :: value, correct_value + INTEGER :: total_error + IF (value .NEQV. correct_value) THEN + total_error = total_error + 1 + WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verifyLogical + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: verifyString +!DEC$endif + SUBROUTINE verifyString(string, value,correct_value,total_error) + CHARACTER*(*) :: string + CHARACTER*(*) :: value, correct_value + INTEGER :: total_error + IF (TRIM(value) .NE. TRIM(correct_value)) THEN + total_error = total_error + 1 + WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string + ENDIF + RETURN + END SUBROUTINE verifyString + + +!---------------------------------------------------------------------- +! Name: h5_fixname_f +! +! Purpose: Create a file name from the a file base name. +! It is a fortran counterpart for the h5_fixname in ../../test/h5test.c +! +! Inputs: +! base_name - base name of the file +! fapl - file access property list +! Outputs: +! full_name - full file name +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! Programmer: Elena Pourmal +! September 13, 2002 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_fixname_f(base_name, full_name, fapl, hdferr) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_fixname_f +!DEC$endif + USE H5GLOBAL + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name + CHARACTER(LEN=*), INTENT(IN) :: full_name ! full name + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list + + INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string + INTEGER(SIZE_T) :: full_namelen ! Length of the full name character string +! INTEGER(HID_T) :: fapl_default + + INTERFACE + INTEGER FUNCTION h5_fixname_c(base_name, base_namelen, fapl, & + full_name, full_namelen) + USE H5GLOBAL + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_FIXNAME_C':: h5_fixname_c + !DEC$ ENDIF + !DEC$ATTRIBUTES reference :: base_name + !DEC$ATTRIBUTES reference :: full_name + CHARACTER(LEN=*), INTENT(IN) :: base_name + INTEGER(SIZE_T) :: base_namelen + INTEGER(HID_T), INTENT(IN) :: fapl + CHARACTER(LEN=*), INTENT(IN) :: full_name + INTEGER(SIZE_T) :: full_namelen + END FUNCTION h5_fixname_c + END INTERFACE + + base_namelen = LEN(base_name) + full_namelen = LEN(full_name) + hdferr = h5_fixname_c(base_name, base_namelen, fapl, & + full_name, full_namelen) + + END SUBROUTINE h5_fixname_f + +!---------------------------------------------------------------------- +! Name: h5_cleanup_f +! +! Purpose: Cleanups tests files +! It is a fortran counterpart for the h5_cleanup in ../../test/h5test.c +! +! Inputs: +! base_name - base name of the file +! fapl - file access property list +! Outputs: +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! Programmer: Elena Pourmal +! September 19, 2002 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_cleanup_f(base_name, fapl, hdferr) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_cleanup_f +!DEC$endif + USE H5GLOBAL + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list + + INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string + + INTERFACE + INTEGER FUNCTION h5_cleanup_c(base_name, base_namelen, fapl) + USE H5GLOBAL + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_CLEANUP_C':: h5_cleanup_c + !DEC$ ENDIF + !DEC$ATTRIBUTES reference :: base_name + CHARACTER(LEN=*), INTENT(IN) :: base_name + INTEGER(SIZE_T) :: base_namelen + INTEGER(HID_T), INTENT(IN) :: fapl + END FUNCTION h5_cleanup_c + END INTERFACE + + base_namelen = LEN(base_name) + hdferr = h5_cleanup_c(base_name, base_namelen, fapl) + + END SUBROUTINE h5_cleanup_f + +!---------------------------------------------------------------------- +! Name: h5_exit_f +! +! Purpose: Exit application +! It is a fortran counterpart for the standard C 'exit()' routine +! Be careful not to overflow the exit value range since +! UNIX supports a very small range such as 1 byte. +! Therefore, exit(256) may end up as exit(0). +! +! Inputs: +! status - Status to return from application +! +! Outputs: +! none +! +! Programmer: Quincey Koziol +! December 14, 2004 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_exit_f(status) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_exit_f +!DEC$endif + IMPLICIT NONE + INTEGER, INTENT(IN) :: status ! Return code + + INTERFACE + SUBROUTINE h5_exit_c(status) + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_EXIT_C':: h5_exit_c + !DEC$ ENDIF + INTEGER, INTENT(IN) :: status + END SUBROUTINE h5_exit_c + END INTERFACE + + CALL h5_exit_c(status) + + END SUBROUTINE h5_exit_f + +!---------------------------------------------------------------------- +! Name: h5_env_nocleanup_f +! +! Purpose: Uses the HDF5_NOCLEANUP environment variable in Fortran +! tests to determine if the output files should be removed +! +! Inputs: +! +! Outputs: HDF5_NOCLEANUP: .true. - don't remove test files +! .false. - remove test files +! +! Programmer: M.S. Breitenfeld +! September 30, 2008 +! +!---------------------------------------------------------------------- + SUBROUTINE h5_env_nocleanup_f(HDF5_NOCLEANUP) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_env_nocleanup_f +!DEC$endif + IMPLICIT NONE + LOGICAL, INTENT(OUT) :: HDF5_NOCLEANUP ! Return code + INTEGER :: status + + INTERFACE + SUBROUTINE h5_env_nocleanup_c(status) + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_ENV_NOCLEANUP_C':: h5_env_nocleanup_c + !DEC$ ENDIF + INTEGER :: status + END SUBROUTINE h5_env_nocleanup_c + END INTERFACE + + CALL h5_env_nocleanup_c(status) + + HDF5_NOCLEANUP = .FALSE. + IF(status.EQ.1) HDF5_NOCLEANUP = .TRUE. + + END SUBROUTINE h5_env_nocleanup_f +END MODULE TH5_MISC |