15 files changed, 4136 insertions, 1097 deletions
diff --git a/fortran/Makefile.am b/fortran/Makefile.am
new file mode 100644
index 0000000..0d55334
--- /dev/null
+++ b/fortran/Makefile.am
@@ -0,0 +1,57 @@
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# This makefile mostly just reinvokes make in the various subdirectories
+# but does so in the correct order.  You can alternatively invoke make from
+# each subdirectory manually.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+#
+# Top-level HDF5-Fortran Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+if BUILD_PARALLEL_CONDITIONAL
+  TESTPARALLEL_DIR=testpar
+endif
+
+# Subdirectories in build order, not including examples directory
+SUBDIRS=src test $(TESTPARALLEL_DIR)
+# All directories that have Makefiles
+DIST_SUBDIRS=src test testpar examples
+
+# Clean and mostlyclean need to recurse into examples directory     
+clean-local:     
+	if test -f examples/Makefile; then                         \
+	  (cd examples && $(MAKE) clean) || exit 1;                \
+	fi;
+mostlyclean-local:         
+	if test -f examples/Makefile; then                         \
+	  (cd examples && $(MAKE) mostlyclean) || exit 1;          \
+	fi; 
+
+# Install examples
+install-examples uninstall-examples:
+	(cd examples && $(MAKE) $@) || exit 1;
+
+
+# Check that examples can be successfully built 
+check-install:
+	$(MAKE) installcheck 
+
+installcheck-local:
+	(cd examples && $(MAKE) $@) || exit 1;
+
+include $(top_srcdir)/config/conclude.am
diff --git a/fortran/Makefile.in b/fortran/Makefile.in
index 477763a..79efa93 100644
--- a/fortran/Makefile.in
+++ b/fortran/Makefile.in
@@ -1,135 +1,698 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-## This makefile mostly just reinvokes make in the various subdirectories
-## but does so in the correct order.  You can alternatively invoke make from
-## each subdirectory manually.
-##
-## Top-level HDF5-Fortran Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=..
-srcdir=@srcdir@
-
-@COMMENCE@
-
-# Subdirectories in build-order (not including `examples')
-SUBDIRS=src test @TESTPARALLEL@
-
-##############################################################################
-##		    T A R G E T S
-##
-## all:		Build libraries, header files, tests, and programs in the
-##	 	various subdirectories but does not run tests or install the
-##		library, header files, or programs.  The components can be
-##		built individually with the targets lib, progs, and tests.
-##
-## check:	Test the uninstalled library to make sure it works. You may
-##		also say `test' or `_test' (`test' doesn't work from the top
-##		level directory for some versions of make because `test' is
-##		also a directory).
-##
-## install:	Installs libraries, header files, programs, and documentation
-##		in the various directories under the prefix directory (lib,
-##		include, bin, man, info).  Use the `--prefix=PATH' option
-##		to `configure' (or `config.status') or say `--help' for
-##		other alternatives.  The default prefix is `/usr/local'.
-##
-## uninstall:	Delete all the installed files that the `install' target
-##		created (but not the noninstalled files such as `make all'
-##		created).
-##
-## clean:	Removes temporary files except those that record the
-##		configuration and those that are part of the distribution.
-##
-## mostlyclean:	Like `clean' except it doesn't delete a few files like
-##		libraries, programs, and/or generated header files because
-##		regenerating them is rarely necessary and takes a lot of time.
-##
-## distclean:	Deletes all files that are created by configuring or building
-##		HDF5.  If you have unpacked the source and built HDF5 without
-##		creating any other files, then `make distclean' will leave
-##		only the files that were in the distrubution.
-##
-## maintainer-clean:
-##		Like `distclean' except it deletes more files.  It deletes
-##		all generated files.  This target is not intended for normal
-##		users; it deletes files that may require special tools to
-##		rebuild.
-##
-## TAGS:	Updates the tags table for this program.
-##
-## dep depend:	Builds dependencies in all subdirectories.  These targets
-##		might not be available on certain combinations of make
-##		programs and C compilers.  At the other extreme, the GNU
-##		make used in combination with gcc will maintain dependency
-##		information automatically.
-lib progs check test _test uninstall:
-	@@SETX@; for d in $(SUBDIRS); do				      \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
-	done
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# This makefile mostly just reinvokes make in the various subdirectories
+# but does so in the correct order.  You can alternatively invoke make from
+# each subdirectory manually.
+#
+# Top-level HDF5-Fortran Makefile(.in)
+#
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
+
+# Subdirectories in build order, not including examples directory
+SUBDIRS = src test $(TESTPARALLEL_DIR)
+# All directories that have Makefiles
+DIST_SUBDIRS = src test testpar examples
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-tests TAGS dep depend:
-	@@SETX@; for d in $(SUBDIRS); do			       	      \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+subdir = fortran
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = Makefile.am Makefile.in
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  fortran/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 
-install-all:
-	@$(MAKE) install
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
 
-install:
-	@@SETX@; for d in $(SUBDIRS); do				      \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
 	done
-	@$(MAKE) install-examples
-	@$(LT) --mode=finish $(libdir)
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile all-local
+installdirs: installdirs-recursive
+installdirs-am:
 
-install-examples:
-	(cd examples && $(MAKE) $@) || exit 1;
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
 
-uninstall-examples:
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am all-local check \
+	check-TESTS check-am clean clean-generic clean-libtool \
+	clean-local clean-recursive distclean distclean-generic \
+	distclean-libtool distclean-recursive distclean-tags distdir \
+	dvi dvi-am dvi-recursive info info-am info-recursive install \
+	install-am install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-info install-info-am install-info-recursive install-man \
+	install-recursive install-strip installcheck installcheck-am \
+	installcheck-local installdirs installdirs-am \
+	installdirs-recursive maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local mostlyclean-recursive \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am \
+	uninstall-info-recursive uninstall-recursive
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# Clean and mostlyclean need to recurse into examples directory     
+clean-local:     
+	if test -f examples/Makefile; then                         \
+	  (cd examples && $(MAKE) clean) || exit 1;                \
+	fi;
+mostlyclean-local:         
+	if test -f examples/Makefile; then                         \
+	  (cd examples && $(MAKE) mostlyclean) || exit 1;          \
+	fi; 
+
+# Install examples
+install-examples uninstall-examples:
 	(cd examples && $(MAKE) $@) || exit 1;
 
-## Check if installation is correct by checking if examples can be built.
-## This requires a proper "make install" has been done.
+# Check that examples can be successfully built 
 check-install:
-	(cd examples && $(MAKE) check) || exit 1
+	$(MAKE) installcheck 
 
-.PHONY: all lib progs test _test install uninstall dep depend clean           \
-	mostlyclean distclean maintainer-clean
+installcheck-local:
+	(cd examples && $(MAKE) $@) || exit 1;
 
-clean mostlyclean:
-	@@SETX@; for d in $(SUBDIRS) examples; do			      \
-	   (cd $$d && $(MAKE) $@);					      \
-	done
-	-$(RM) conftest conftest.c
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-distclean:
-	@@SETX@; for d in $(SUBDIRS) examples; do			      \
-	   (cd $$d && $(MAKE) $@);					      \
-	done
-	-$(RM) config/commence config/conclude
-	-$(RM) config/stamp1 config/stamp2 config/depend?
-	-$(RM) config.cache config.log config.status
-	-$(RM) src/H5config_fortran.h src/H5pubconf_fortran.h
-	-$(RM) libtool Makefile
-
-maintainer-clean:
-	@echo "This target is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	@@SETX@; for d in $(SUBDIRS) examples; do			      \
-	   (cd $$d && $(MAKE) $@);					      \
+lib progs tests ::
+	@$(MAKE) build-$@ || exit 1;                                          \
+	for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X -a $$d != .; then                                \
+	        (set -x; cd $$d && $(MAKE) $@) || exit 1;                     \
+	    fi;                                                               \
 	done
-	-$(RM) config.cache config.log config.status src/H5config_fortran.h
-	-$(RM) configure src/H5config_fortran.h.in
 
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test: $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	   echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+        fi
+	@for test in $(TEST_PROG) dummy; do                                  \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNTEST) ./$$test $(TEST_FLAGS) ||                         \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNPARALLEL) ./$$test $(TEST_FLAGS) ||                     \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@for test in $(TEST_SCRIPT) dummy; do                                \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	         srcdir="$(srcdir)"                                           \
+	         /bin/sh $$test $(TEST_FLAGS) ||                              \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	  fi;                                                                 \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	    echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd:
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        HDF5_DRIVER=$$vfd $(MAKE) check;                              \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fortran/examples/Dependencies b/fortran/examples/Dependencies
deleted file mode 100644
index f29a269..0000000
--- a/fortran/examples/Dependencies
+++ /dev/null
@@ -1,3 +0,0 @@
-## This file is machine generated on GNU systems.
-## Only temporary changes may be made here.
-
diff --git a/fortran/examples/Makefile.am b/fortran/examples/Makefile.am
new file mode 100644
index 0000000..6f32ce9
--- /dev/null
+++ b/fortran/examples/Makefile.am
@@ -0,0 +1,105 @@
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+##
+#
+# HDF5-Fortran Examples Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+# These are the programs that 'make all' or 'make tests' will build and
+# that 'make check' will run.  List them in the order in which they should
+# be run.
+# We don't tell automake about these programs so that it doesn't try to
+# compile them with the regular fortran compiler.
+TEST_PROG=dsetexample fileexample rwdsetexample attrexample groupexample    \
+       grpsexample grpdsetexample hyperslab selectele grpit refobjexample   \
+       refregexample mountexample compound
+
+# Tell configure.in when to build examples
+EXTRA_PROG=$(TEST_PROG)
+EXAMPLE_PROG=$(EXTRA_PROG)
+
+# List files to be installed here
+INSTALL_FILES=dsetexample.f90 fileexample.f90 rwdsetexample.f90             \
+       attrexample.f90 groupexample.f90 grpsexample.f90 grpdsetexample.f90  \
+       hyperslab.f90 selectele.f90 grpit.f90 refobjexample.f90              \
+       refregexample.f90 mountexample.f90 compound.f90
+
+# Tell automake which files to clean
+CLEANFILES=*.h5 $(EXTRA_PROG)
+
+# Tell automake how to build examples using h5fc
+# Additional dependencies for the examples are listed below
+$(EXTRA_PROG): $(LIBHDF5) $(LIBH5F)
+if BUILD_PARALLEL_CONDITIONAL
+	$(H5FC_PP) $(FFLAGS) -o $@ $(srcdir)/$@.f90;
+else
+	$(H5FC) $(FFLAGS) -o $@ $(srcdir)/$@.f90;
+endif
+
+# Tell automake how to install examples
+EXAMPLEDIR=$(docdir)/hdf5/examples/fortran
+
+$(EXAMPLEDIR):
+	-$(top_srcdir)/bin/mkdirs $@
+
+install-data-local:
+	$(MAKE) install-examples
+uninstall-local:
+	$(MAKE) uninstall-examples
+
+# We're installing source files, not the example programs.  Add .f90 to each
+# example program to get its source (and do the same when uninstalling).
+install-examples: $(EXAMPLEDIR)
+	@for f in X $(INSTALL_FILES); do                                   \
+	  if test $$f != X; then                                           \
+	    (set -x; $(INSTALL_DATA) $(top_srcdir)/fortran/examples/$$f $(EXAMPLEDIR)/. || exit 1);\
+	  fi;                                                              \
+	done
+
+uninstall-examples:
+	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then                               \
+	  set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROG);               \
+	fi
+
+check-install:
+	$(MAKE) installcheck
+installcheck-local:
+	$(MAKE) check
+
+# List dependencies for each example.  Normally, automake would take
+# care of this for us, but if we tell automake about the programs it
+# will try to build them with the normal C compiler, not h5cc.  This is
+# an inelegant way of solving the problem.
+# All programs share the same build rule and a dependency on the main hdf5
+# and fortran libraries above.
+dsetexample: dsetexample.f90
+fileexample: fileexample.f90
+rwdsetexample: rwdsetexample.f90
+attrexample: attrexample.f90
+groupexample: groupexample.f90
+grpsexample: grpsexample.f90
+grpdsetexample: grpdsetexample.f90
+hyperslab: hyperslab.f90
+selectele: selectele.f90
+grpit: grpit.f90
+refobjexample: refobjexample.f90
+refregexample: refregexample.f90
+mountexample: mountexample.f90
+compound: compound.f90
+
+include $(top_srcdir)/config/conclude.am
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 8391834..90c0a56 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -1,178 +1,628 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-## HDF5-Fortran test/Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=../..
-srcdir=@srcdir@
-@COMMENCE@
-
-HDF_FORTRAN="yes"
-
-hdf5_builddir=$(top_builddir)/src
-
-## Replace building FC with the just installed h5fc
-FC=$(bindir)/h5fc
-FC_PP=$(bindir)/h5pfc
-
-## These are the programs that `make all' or `make tests' will build and which
-## `make check' will run. List them in the order they should be run.
-TEST_PROGS=dsetexample fileexample rwdsetexample attrexample groupexample       \
-           grpsexample grpdsetexample hyperslab selectele grpit refobjexample   \
-           refregexample mountexample compound
-
-## These are the files that `make clean' (and derivatives) will remove from
-## this directory.
-CLEAN=*.h5
-
-## List all source files here. The list of object files will be
-## created by replacing the `.f90' with a `.o'. This list is necessary
-## for building automatic dependencies.
-TEST_SRC=dsetexample.f90 fileexample.f90 rwdsetexample.f90 attrexample.f90      \
-         groupexample.f90 grpsexample.f90 grpdsetexample.f90 hyperslab.f90      \
-         selectele.f90 grpit.f90 refobjexample.f90 refregexample.f90            \
-         mountexample.f90 compound.f90
-TEST_OBJ=$(TEST_SRC:.f90=.lo)
-
-EXAMPLE_PROGS=$(TEST_SRC)
-
-## How to build the programs... they all depend on the Fortran & C hdf5 libraries
-$(TEST_PROGS): $(LIBHDF5)
-dsetexample: $(srcdir)/dsetexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
 
-fileexample: $(srcdir)/fileexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-rwdsetexample: $(srcdir)/rwdsetexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
-attrexample: $(srcdir)/attrexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+@SET_MAKE@
 
-groupexample: $(srcdir)/groupexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# HDF5-Fortran Examples Makefile(.in)
+#
 
-grpsexample: $(srcdir)/grpsexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
 
-grpdsetexample: $(srcdir)/grpdsetexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
 
-hyperslab: $(srcdir)/hyperslab.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-selectele: $(srcdir)/selectele.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
 
-grpit: $(srcdir)/grpit.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
 
-refobjexample: $(srcdir)/refobjexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
 
-refregexample: $(srcdir)/refregexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	fi
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+# These are the programs that 'make all' or 'make tests' will build and
+# that 'make check' will run.  List them in the order in which they should
+# be run.
+# We don't tell automake about these programs so that it doesn't try to
+# compile them with the regular fortran compiler.
+TEST_PROG = dsetexample fileexample rwdsetexample attrexample groupexample    \
+       grpsexample grpdsetexample hyperslab selectele grpit refobjexample   \
+       refregexample mountexample compound
+
+
+# Tell configure.in when to build examples
+EXTRA_PROG = $(TEST_PROG)
+EXAMPLE_PROG = $(EXTRA_PROG)
+
+# List files to be installed here
+INSTALL_FILES = dsetexample.f90 fileexample.f90 rwdsetexample.f90             \
+       attrexample.f90 groupexample.f90 grpsexample.f90 grpdsetexample.f90  \
+       hyperslab.f90 selectele.f90 grpit.f90 refobjexample.f90              \
+       refregexample.f90 mountexample.f90 compound.f90
+
+
+# Tell automake which files to clean
+CLEANFILES = *.h5 $(EXTRA_PROG)
+
+# Tell automake how to install examples
+EXAMPLEDIR = $(docdir)/hdf5/examples/fortran
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+subdir = fortran/examples
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  fortran/examples/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile all-local
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
 
-mountexample: $(srcdir)/mountexample.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+uninstall-am: uninstall-info-am uninstall-local
+
+.PHONY: all all-am all-local check check-TESTS check-am clean \
+	clean-generic clean-libtool distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-data-local \
+	install-exec install-exec-am install-info install-info-am \
+	install-man install-strip installcheck installcheck-am \
+	installcheck-local installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool uninstall uninstall-am uninstall-info-am \
+	uninstall-local
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# Tell automake how to build examples using h5fc
+# Additional dependencies for the examples are listed below
+$(EXTRA_PROG): $(LIBHDF5) $(LIBH5F)
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5FC_PP) $(FFLAGS) -o $@ $(srcdir)/$@.f90;
+@BUILD_PARALLEL_CONDITIONAL_FALSE@	$(H5FC) $(FFLAGS) -o $@ $(srcdir)/$@.f90;
+
+$(EXAMPLEDIR):
+	-$(top_srcdir)/bin/mkdirs $@
+
+install-data-local:
+	$(MAKE) install-examples
+uninstall-local:
+	$(MAKE) uninstall-examples
+
+# We're installing source files, not the example programs.  Add .f90 to each
+# example program to get its source (and do the same when uninstalling).
+install-examples: $(EXAMPLEDIR)
+	@for f in X $(INSTALL_FILES); do                                   \
+	  if test $$f != X; then                                           \
+	    (set -x; $(INSTALL_DATA) $(top_srcdir)/fortran/examples/$$f $(EXAMPLEDIR)/. || exit 1);\
+	  fi;                                                              \
+	done
+
+uninstall-examples:
+	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then                               \
+	  set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROG);               \
 	fi
 
-compound: $(srcdir)/compound.f90
-	@if test "X$(PARALLEL)" = "Xno"; then				\
-	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC) -o $@ $(srcdir)/$@.f90;					\
-	else								\
-	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
-	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
+check-install:
+	$(MAKE) installcheck
+installcheck-local:
+	$(MAKE) check
+
+# List dependencies for each example.  Normally, automake would take
+# care of this for us, but if we tell automake about the programs it
+# will try to build them with the normal C compiler, not h5cc.  This is
+# an inelegant way of solving the problem.
+# All programs share the same build rule and a dependency on the main hdf5
+# and fortran libraries above.
+dsetexample: dsetexample.f90
+fileexample: fileexample.f90
+rwdsetexample: rwdsetexample.f90
+attrexample: attrexample.f90
+groupexample: groupexample.f90
+grpsexample: grpsexample.f90
+grpdsetexample: grpdsetexample.f90
+hyperslab: hyperslab.f90
+selectele: selectele.f90
+grpit: grpit.f90
+refobjexample: refobjexample.f90
+refregexample: refregexample.f90
+mountexample: mountexample.f90
+compound: compound.f90
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+lib progs tests ::
+	@$(MAKE) build-$@ || exit 1;                                          \
+	for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X -a $$d != .; then                                \
+	        (set -x; cd $$d && $(MAKE) $@) || exit 1;                     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test: $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	   echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+        fi
+	@for test in $(TEST_PROG) dummy; do                                  \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNTEST) ./$$test $(TEST_FLAGS) ||                         \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNPARALLEL) ./$$test $(TEST_FLAGS) ||                     \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@for test in $(TEST_SCRIPT) dummy; do                                \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	         srcdir="$(srcdir)"                                           \
+	         /bin/sh $$test $(TEST_FLAGS) ||                              \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	  fi;                                                                 \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	    echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
 	fi
 
-@CONCLUDE@
+# Run test with different Virtual File Driver
+check-vfd:
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        HDF5_DRIVER=$$vfd $(MAKE) check;                              \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fortran/src/Dependencies b/fortran/src/Dependencies
deleted file mode 100644
index 5f19151..0000000
--- a/fortran/src/Dependencies
+++ /dev/null
@@ -1,591 +0,0 @@
-## This file is machine generated on GNU systems.
-## Only temporary changes may be made here.
-
-H5f90kit.lo: \
-   $(top_srcdir)/fortran/src/H5f90kit.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5_f.lo: \
-   $(top_srcdir)/fortran/src/H5_f.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Af.lo: \
-   $(top_srcdir)/fortran/src/H5Af.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h \
-   $(top_srcdir)/src/H5Eprivate.h
-H5Df.lo: \
-   $(top_srcdir)/fortran/src/H5Df.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Ef.lo: \
-   $(top_srcdir)/fortran/src/H5Ef.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Ff.lo: \
-   $(top_srcdir)/fortran/src/H5Ff.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h \
-   $(top_srcdir)/src/H5Eprivate.h
-H5Gf.lo: \
-   $(top_srcdir)/fortran/src/H5Gf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5If.lo: \
-   $(top_srcdir)/fortran/src/H5If.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h \
-   $(top_srcdir)/src/H5Eprivate.h
-H5Pf.lo: \
-   $(top_srcdir)/fortran/src/H5Pf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Rf.lo: \
-   $(top_srcdir)/fortran/src/H5Rf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Sf.lo: \
-   $(top_srcdir)/fortran/src/H5Sf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Tf.lo: \
-   $(top_srcdir)/fortran/src/H5Tf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
-H5Zf.lo: \
-   $(top_srcdir)/fortran/src/H5Zf.c \
-   $(top_srcdir)/fortran/src/H5f90.h \
-   $(top_srcdir)/src/hdf5.h \
-   $(top_srcdir)/src/H5public.h \
-   $(top_builddir)/src/H5pubconf.h \
-   $(top_srcdir)/src/H5api_adpt.h \
-   $(top_srcdir)/src/H5Apublic.h \
-   $(top_srcdir)/src/H5Ipublic.h \
-   $(top_srcdir)/src/H5ACpublic.h \
-   $(top_srcdir)/src/H5Bpublic.h \
-   $(top_srcdir)/src/H5Dpublic.h \
-   $(top_srcdir)/src/H5Epublic.h \
-   $(top_srcdir)/src/H5Epubgen.h \
-   $(top_srcdir)/src/H5Fpublic.h \
-   $(top_srcdir)/src/H5FDpublic.h \
-   $(top_srcdir)/src/H5FPpublic.h \
-   $(top_srcdir)/src/H5Gpublic.h \
-   $(top_srcdir)/src/H5Opublic.h \
-   $(top_srcdir)/src/H5HGpublic.h \
-   $(top_srcdir)/src/H5HLpublic.h \
-   $(top_srcdir)/src/H5MMpublic.h \
-   $(top_srcdir)/src/H5Ppublic.h \
-   $(top_srcdir)/src/H5Tpublic.h \
-   $(top_srcdir)/src/H5Zpublic.h \
-   $(top_srcdir)/src/H5Rpublic.h \
-   $(top_srcdir)/src/H5Spublic.h \
-   $(top_srcdir)/src/H5FDcore.h \
-   $(top_srcdir)/src/H5FDfamily.h \
-   $(top_srcdir)/src/H5FDgass.h \
-   $(top_srcdir)/src/H5FDlog.h \
-   $(top_srcdir)/src/H5FDmpi.h \
-   $(top_srcdir)/src/H5FDfphdf5.h \
-   $(top_srcdir)/src/H5FDmpio.h \
-   $(top_srcdir)/src/H5FDmpiposix.h \
-   $(top_srcdir)/src/H5FDmulti.h \
-   $(top_srcdir)/src/H5FDsec2.h \
-   $(top_srcdir)/src/H5FDsrb.h \
-   $(top_srcdir)/src/H5FDstdio.h \
-   $(top_srcdir)/src/H5FDstream.h \
-   $(top_srcdir)/fortran/src/H5f90i.h \
-   $(top_srcdir)/src/H5private.h \
-   $(top_srcdir)/src/H5MPprivate.h \
-   $(top_srcdir)/src/H5FSprivate.h \
-   $(top_srcdir)/fortran/src/H5f90proto.h
diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am
new file mode 100644
index 0000000..9e055bc
--- /dev/null
+++ b/fortran/src/Makefile.am
@@ -0,0 +1,120 @@
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+#
+# HDF5 Fortran Library Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+# Include src directory in both Fortran and C flags (C compiler is used
+# for linking)
+AM_CFLAGS = -I$(top_srcdir)/src
+AM_FFLAGS=-I$(top_srcdir)/src
+
+# This is our main target, the fortran library
+lib_LTLIBRARIES=libhdf5_fortran.la
+
+# DEBUG - will linking statically solve fortran build problem?
+libhdf5_fortran_la_LDFLAGS=-static
+
+# Include HDF5.f90 if parallel is disabled, HDF5mpiof*  if parallel is enabled
+if BUILD_PARALLEL_CONDITIONAL
+   PARALLEL_COND_SRC = H5FDmpiof.c HDF5mpio.f90 H5FDmpioff.f90
+else
+   PARALLEL_COND_SRC = HDF5.f90
+endif
+
+# Source files for the library.
+libhdf5_fortran_la_SOURCES=H5fortran_flags.f90 H5f90global.f90          \
+         H5fortran_types.f90 H5_ff.f90 H5Aff.f90 H5Dff.f90 H5Eff.f90    \
+         H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Pff.f90 H5Rff.f90 H5Sff.f90    \
+         H5Tff.f90 H5Zff.f90                                            \
+         H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c           \
+         H5If.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c                      \
+         $(PARALLEL_COND_SRC)
+
+# h5fc and libhdf5_fortran.settings are generated during configure.
+# Remove them only when distclean.
+DISTCLEANFILES=h5fc H5fortran_types.f90 libhdf5_fortran.settings
+
+# Fortran module files can have different extensions and different names
+# (e.g., different capitalizations) on different platforms.  Write rules
+# for them explicitly rather than trying to teach automake about them.
+# They should be installed as headers and removed during clean.
+maintainer-clean-local: clean-local
+distclean-local: clean-local
+clean-local:
+	if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
+	  $(RM) *.$(F9XMODEXT);                                         \
+	fi
+
+install-data-local:
+	if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
+	  $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \
+	fi
+
+uninstall-local:
+	if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then      \
+	  if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \
+	    set -x; $(RM) $(includedir)/*.$(F9XMODEXT);                 \
+	  fi;                                                           \
+	fi;								\
+	$(RM) $(bindir)/$(H5FC_NAME)
+
+# Also install and uninstall (uninstall-local above) h5fc script
+install-exec-local:
+	$(INSTALL) h5fc $(bindir)/$(H5FC_NAME)   
+
+# Install libhdf5_fortran.settings in lib directory
+settingsdir=$(libdir)
+settings_DATA=libhdf5_fortran.settings
+
+# Custom rule for installing h5fc, since it will be named h5pfc if hdf5
+# is configured for parallel mode
+if BUILD_PARALLEL_CONDITIONAL
+  H5FC_NAME = h5pfc
+else
+  H5FC_NAME = h5fc
+endif
+
+# Hardcode the dependencies of these files. There isn't a known way of
+# determining this automagically (like we do with the C files). So, when
+# doing a parallel make, some modules could be made way before the
+# modules they depend upon are actually made. *sigh*
+H5fortran_flags.lo: $(srcdir)/H5fortran_flags.f90
+H5f90global.lo:     $(srcdir)/H5f90global.f90 H5fortran_flags.lo H5fortran_types.lo
+H5fortran_types.lo: H5fortran_types.f90
+H5_ff.lo:           $(srcdir)/H5_ff.f90 H5f90global.lo
+H5Aff.lo:           $(srcdir)/H5Aff.f90 H5f90global.lo
+H5Dff.lo:           $(srcdir)/H5Dff.f90 H5f90global.lo
+H5Eff.lo:           $(srcdir)/H5Eff.f90 H5f90global.lo
+H5Fff.lo:           $(srcdir)/H5Fff.f90 H5f90global.lo
+H5Gff.lo:           $(srcdir)/H5Gff.f90 H5f90global.lo
+H5Iff.lo:           $(srcdir)/H5Iff.f90 H5f90global.lo
+H5Pff.lo:           $(srcdir)/H5Pff.f90 H5f90global.lo
+H5Rff.lo:           $(srcdir)/H5Rff.f90 H5f90global.lo
+H5Sff.lo:           $(srcdir)/H5Sff.f90 H5f90global.lo
+H5Tff.lo:           $(srcdir)/H5Tff.f90 H5f90global.lo
+H5Zff.lo:           $(srcdir)/H5Zff.f90 H5f90global.lo
+HDF5.lo:            $(srcdir)/HDF5.f90 H5f90global.lo H5Aff.lo      \
+                    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
+                    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo
+H5FDmpioff.lo:      $(srcdir)/H5FDmpioff.f90 H5f90global.lo
+HDF5mpio.lo:        $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5Aff.lo  \
+                    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
+                    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo H5FDmpioff.lo
+
+include $(top_srcdir)/config/conclude.am
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 83dc6b8..65ae69c 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -1,88 +1,836 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-## HDF5 Fortran Library Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=../..
-srcdir=@srcdir@
-@COMMENCE@
-
-HDF_FORTRAN="yes"
-
-hdf5_srcdir=$(top_srcdir)/src
-hdf5_builddir=$(top_builddir)/src
-
-TRACE=perl $(top_srcdir)/bin/trace
-
-## Add `-I.' to the C preprocessor flags.
-CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) -I$(srcdir) @CPPFLAGS@
-
-## This is our main target
-LIB=libhdf5_fortran.la
-
-## h5fc and libhdf5_fortran.settings are generated during configure. 
-## Remove them only when distclean.
-DISTCLEAN=H5fortran_types.f90 h5fc libhdf5_fortran.settings
-
-## Public header files (to be installed)...
-PUB_HDR=
-PUB_PROGS=h5fc
-
-## Source and object files for the library
-ADD_PARALLEL_FILES=@ADD_PARALLEL_FILES@
-
-FPAR_MOD=${ADD_PARALLEL_FILES:yes=HDF5mpio.f90}
-
-CPARALLEL=${ADD_PARALLEL_FILES:yes=H5FDmpiof.c}
-CLIB_SRC=H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c \
-         H5If.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c ${CPARALLEL:no=}
-
-FPARALLEL=${ADD_PARALLEL_FILES:yes=H5FDmpioff.f90}
-FLIB_SRC=H5fortran_flags.f90 H5f90global.f90 H5fortran_types.f90 H5_ff.f90	\
-         H5Aff.f90 H5Dff.f90 H5Eff.f90 H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Pff.f90	\
-         H5Rff.f90 H5Sff.f90 H5Tff.f90 H5Zff.f90 ${FPARALLEL:no=} ${FPAR_MOD:no=HDF5.f90}
-
-LIB_SRC=$(CLIB_SRC) $(FLIB_SRC)
-LIB_OBJ=$(CLIB_SRC:.c=.lo) $(FLIB_SRC:.f90=.lo)
-
-## Hardcode the dependencies of these files. There isn't a known way of
-## determining this automagically (like we do with the C files). So, when
-## doing a parallel make, some modules could be made way before the
-## modules they depend upon are actually made. *sigh*
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# HDF5 Fortran Library Makefile(.in)
+#
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+# Include src directory in both Fortran and C flags (C compiler is used
+# for linking)
+AM_CFLAGS = -I$(top_srcdir)/src
+AM_FFLAGS = -I$(top_srcdir)/src
+
+# This is our main target, the fortran library
+lib_LTLIBRARIES = libhdf5_fortran.la
+
+# DEBUG - will linking statically solve fortran build problem?
+libhdf5_fortran_la_LDFLAGS = -static
+
+# Include HDF5.f90 if parallel is disabled, HDF5mpiof*  if parallel is enabled
+@BUILD_PARALLEL_CONDITIONAL_TRUE@PARALLEL_COND_SRC = H5FDmpiof.c HDF5mpio.f90 H5FDmpioff.f90
+@BUILD_PARALLEL_CONDITIONAL_FALSE@PARALLEL_COND_SRC = HDF5.f90
+
+# Source files for the library.
+libhdf5_fortran_la_SOURCES = H5fortran_flags.f90 H5f90global.f90          \
+         H5fortran_types.f90 H5_ff.f90 H5Aff.f90 H5Dff.f90 H5Eff.f90    \
+         H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Pff.f90 H5Rff.f90 H5Sff.f90    \
+         H5Tff.f90 H5Zff.f90                                            \
+         H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c           \
+         H5If.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c                      \
+         $(PARALLEL_COND_SRC)
+
+
+# h5fc and libhdf5_fortran.settings are generated during configure.
+# Remove them only when distclean.
+DISTCLEANFILES = h5fc H5fortran_types.f90 libhdf5_fortran.settings
+
+# Install libhdf5_fortran.settings in lib directory
+settingsdir = $(libdir)
+settings_DATA = libhdf5_fortran.settings
+
+# Custom rule for installing h5fc, since it will be named h5pfc if hdf5
+# is configured for parallel mode
+@BUILD_PARALLEL_CONDITIONAL_TRUE@H5FC_NAME = h5pfc
+@BUILD_PARALLEL_CONDITIONAL_FALSE@H5FC_NAME = h5fc
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+subdir = fortran/src
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES = h5fc H5fortran_types.f90 libhdf5_fortran.settings
+LTLIBRARIES = $(lib_LTLIBRARIES)
+
+libhdf5_fortran_la_LIBADD =
+@BUILD_PARALLEL_CONDITIONAL_TRUE@am__objects_1 = H5FDmpiof.lo \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	HDF5mpio.lo H5FDmpioff.lo
+@BUILD_PARALLEL_CONDITIONAL_FALSE@am__objects_1 = HDF5.lo
+am_libhdf5_fortran_la_OBJECTS = H5fortran_flags.lo H5f90global.lo \
+	H5fortran_types.lo H5_ff.lo H5Aff.lo H5Dff.lo H5Eff.lo H5Fff.lo \
+	H5Gff.lo H5Iff.lo H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo \
+	H5f90kit.lo H5_f.lo H5Af.lo H5Df.lo H5Ef.lo H5Ff.lo H5Gf.lo \
+	H5If.lo H5Pf.lo H5Rf.lo H5Sf.lo H5Tf.lo H5Zf.lo \
+	$(am__objects_1)
+libhdf5_fortran_la_OBJECTS = $(am_libhdf5_fortran_la_OBJECTS)
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/src
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/H5Af.Plo ./$(DEPDIR)/H5Df.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5Ef.Plo ./$(DEPDIR)/H5FDmpiof.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5Ff.Plo ./$(DEPDIR)/H5Gf.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5If.Plo ./$(DEPDIR)/H5Pf.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5Rf.Plo ./$(DEPDIR)/H5Sf.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5Tf.Plo ./$(DEPDIR)/H5Zf.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/H5_f.Plo ./$(DEPDIR)/H5f90kit.Plo
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+F77COMPILE = $(F77) $(AM_FFLAGS) $(FFLAGS)
+LTF77COMPILE = $(LIBTOOL) --mode=compile $(F77) $(AM_FFLAGS) $(FFLAGS)
+F77LD = $(F77)
+F77LINK = $(LIBTOOL) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libhdf5_fortran_la_SOURCES)
+DATA = $(settings_DATA)
+
+DIST_COMMON = README H5fortran_types.f90.in Makefile.am Makefile.in \
+	h5fc.in libhdf5_fortran.settings.in
+SOURCES = $(libhdf5_fortran_la_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .f90 .lo .o .obj
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  fortran/src/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+h5fc: $(top_builddir)/config.status h5fc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+H5fortran_types.f90: $(top_builddir)/config.status H5fortran_types.f90.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+libhdf5_fortran.settings: $(top_builddir)/config.status libhdf5_fortran.settings.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+libLTLIBRARIES_INSTALL = $(INSTALL)
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
+	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test -z "$dir" && dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libhdf5_fortran.la: $(libhdf5_fortran_la_OBJECTS) $(libhdf5_fortran_la_DEPENDENCIES) 
+	$(F77LINK) -rpath $(libdir) $(libhdf5_fortran_la_LDFLAGS) $(libhdf5_fortran_la_OBJECTS) $(libhdf5_fortran_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Af.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Df.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ef.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmpiof.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ff.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5If.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Rf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Sf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5_f.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5f90kit.Plo@am__quote@
+
+distclean-depend:
+	-rm -rf ./$(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+
+.c.lo:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+CCDEPMODE = @CCDEPMODE@
+
+.f90.o:
+	$(F77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+.f90.obj:
+	$(F77COMPILE) -c -o $@ `cygpath -w $<`
+
+.f90.lo:
+	$(LTF77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+settingsDATA_INSTALL = $(INSTALL_DATA)
+install-settingsDATA: $(settings_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(settingsdir)
+	@list='$(settings_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(settingsDATA_INSTALL) $$d$$p $(DESTDIR)$(settingsdir)/$$f"; \
+	  $(settingsDATA_INSTALL) $$d$$p $(DESTDIR)$(settingsdir)/$$f; \
+	done
+
+uninstall-settingsDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(settings_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(settingsdir)/$$f"; \
+	  rm -f $(DESTDIR)$(settingsdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(DATA) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(settingsdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
+	mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-libtool distclean-local \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-settingsDATA
+
+install-exec-am: install-exec-local install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+	maintainer-clean-local
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES uninstall-local \
+	uninstall-settingsDATA
+
+.PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \
+	clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
+	distclean distclean-compile distclean-depend distclean-generic \
+	distclean-libtool distclean-local distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-data-local install-exec install-exec-am \
+	install-exec-local install-info install-info-am \
+	install-libLTLIBRARIES install-man install-settingsDATA \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-local mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool tags uninstall \
+	uninstall-am uninstall-info-am uninstall-libLTLIBRARIES \
+	uninstall-local uninstall-settingsDATA
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# Fortran module files can have different extensions and different names
+# (e.g., different capitalizations) on different platforms.  Write rules
+# for them explicitly rather than trying to teach automake about them.
+# They should be installed as headers and removed during clean.
+maintainer-clean-local: clean-local
+distclean-local: clean-local
+clean-local:
+	if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
+	  $(RM) *.$(F9XMODEXT);                                         \
+	fi
+
+install-data-local:
+	if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
+	  $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \
+	fi
+
+uninstall-local:
+	if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then      \
+	  if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \
+	    set -x; $(RM) $(includedir)/*.$(F9XMODEXT);                 \
+	  fi;                                                           \
+	fi;								\
+	$(RM) $(bindir)/$(H5FC_NAME)
+
+# Also install and uninstall (uninstall-local above) h5fc script
+install-exec-local:
+	$(INSTALL) h5fc $(bindir)/$(H5FC_NAME)   
+
+# Hardcode the dependencies of these files. There isn't a known way of
+# determining this automagically (like we do with the C files). So, when
+# doing a parallel make, some modules could be made way before the
+# modules they depend upon are actually made. *sigh*
 H5fortran_flags.lo: $(srcdir)/H5fortran_flags.f90
-H5f90global.lo:	    $(srcdir)/H5f90global.f90 H5fortran_flags.lo H5fortran_types.lo
+H5f90global.lo:     $(srcdir)/H5f90global.f90 H5fortran_flags.lo H5fortran_types.lo
 H5fortran_types.lo: H5fortran_types.f90
-H5_ff.lo:	    $(srcdir)/H5_ff.f90 H5f90global.lo
-H5Aff.lo:	    $(srcdir)/H5Aff.f90 H5f90global.lo
-H5Dff.lo:	    $(srcdir)/H5Dff.f90 H5f90global.lo
-H5Eff.lo:	    $(srcdir)/H5Eff.f90 H5f90global.lo
-H5Fff.lo:	    $(srcdir)/H5Fff.f90 H5f90global.lo
-H5Gff.lo:	    $(srcdir)/H5Gff.f90 H5f90global.lo
-H5Iff.lo:	    $(srcdir)/H5Iff.f90 H5f90global.lo
-H5Pff.lo:	    $(srcdir)/H5Pff.f90 H5f90global.lo
-H5Rff.lo:	    $(srcdir)/H5Rff.f90 H5f90global.lo
-H5Sff.lo:	    $(srcdir)/H5Sff.f90 H5f90global.lo
-H5Tff.lo:	    $(srcdir)/H5Tff.f90 H5f90global.lo
-H5Zff.lo:	    $(srcdir)/H5Zff.f90 H5f90global.lo
-HDF5.lo:	    $(srcdir)/HDF5.f90 H5f90global.lo H5Aff.lo	    \
-		    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
-		    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo
-H5FDmpioff.lo:	    $(srcdir)/H5FDmpioff.f90 H5f90global.lo
-HDF5mpio.lo:	    $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5Aff.lo  \
-		    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
-		    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo H5FDmpioff.lo
-
-ARFLAGS=rc
-
-@CONCLUDE@
+H5_ff.lo:           $(srcdir)/H5_ff.f90 H5f90global.lo
+H5Aff.lo:           $(srcdir)/H5Aff.f90 H5f90global.lo
+H5Dff.lo:           $(srcdir)/H5Dff.f90 H5f90global.lo
+H5Eff.lo:           $(srcdir)/H5Eff.f90 H5f90global.lo
+H5Fff.lo:           $(srcdir)/H5Fff.f90 H5f90global.lo
+H5Gff.lo:           $(srcdir)/H5Gff.f90 H5f90global.lo
+H5Iff.lo:           $(srcdir)/H5Iff.f90 H5f90global.lo
+H5Pff.lo:           $(srcdir)/H5Pff.f90 H5f90global.lo
+H5Rff.lo:           $(srcdir)/H5Rff.f90 H5f90global.lo
+H5Sff.lo:           $(srcdir)/H5Sff.f90 H5f90global.lo
+H5Tff.lo:           $(srcdir)/H5Tff.f90 H5f90global.lo
+H5Zff.lo:           $(srcdir)/H5Zff.f90 H5f90global.lo
+HDF5.lo:            $(srcdir)/HDF5.f90 H5f90global.lo H5Aff.lo      \
+                    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
+                    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo
+H5FDmpioff.lo:      $(srcdir)/H5FDmpioff.f90 H5f90global.lo
+HDF5mpio.lo:        $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5Aff.lo  \
+                    H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo    \
+                    H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo H5FDmpioff.lo
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+lib progs tests ::
+	@$(MAKE) build-$@ || exit 1;                                          \
+	for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X -a $$d != .; then                                \
+	        (set -x; cd $$d && $(MAKE) $@) || exit 1;                     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test: $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	   echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+        fi
+	@for test in $(TEST_PROG) dummy; do                                  \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNTEST) ./$$test $(TEST_FLAGS) ||                         \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNPARALLEL) ./$$test $(TEST_FLAGS) ||                     \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@for test in $(TEST_SCRIPT) dummy; do                                \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	         srcdir="$(srcdir)"                                           \
+	         /bin/sh $$test $(TEST_FLAGS) ||                              \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	  fi;                                                                 \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	    echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd:
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        HDF5_DRIVER=$$vfd $(MAKE) check;                              \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fortran/src/h5fc.in b/fortran/src/h5fc.in
index 0d24a92..2b92e6d 100755
--- a/fortran/src/h5fc.in
+++ b/fortran/src/h5fc.in
@@ -204,7 +204,7 @@ done
 # It's possible that there isn't a modules flag...
   fmodules=""
   if test -n "$F9XMODFLAG"; then
-    fmodules="${F9XMODFLAG}${libdir}"
+    fmodules="${F9XMODFLAG}${includedir}"
   fi
 
 if test "x$do_compile" = "xyes"; then
diff --git a/fortran/test/Dependencies b/fortran/test/Dependencies
deleted file mode 100644
index f29a269..0000000
--- a/fortran/test/Dependencies
+++ /dev/null
@@ -1,3 +0,0 @@
-## This file is machine generated on GNU systems.
-## Only temporary changes may be made here.
-
diff --git a/fortran/test/Makefile.am b/fortran/test/Makefile.am
new file mode 100644
index 0000000..0e6bc55
--- /dev/null
+++ b/fortran/test/Makefile.am
@@ -0,0 +1,68 @@
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+#
+# HDF5-Fortran test/Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+# Include files
+AM_FFLAGS=-I$(top_builddir)/fortran/src -M$(top_builddir)/fortran/src
+AM_CFLAGS=-I$(top_srcdir)/src
+
+# The Fortran test library
+lib_LTLIBRARIES=libh5test_fortran.la
+
+# Our main targets, the tests themselves
+TEST_PROG=fortranlib_test fflush1 fflush2
+check_PROGRAMS=$(TEST_PROG)
+
+libh5test_fortran_la_SOURCES=fortranlib_test.f90 tH5F.f90 tH5D.f90 \
+        tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 tH5Sselect.f90 \
+        tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tf.f90 t.c
+
+libh5test_fortran_la_LDFLAGS=-static
+
+##noinst_HEADERS=H5f90proto.h
+
+# Source files are used for both the library and fortranlib_test.
+# Automake will complain about this without the following workaround.
+fortranlib_test_FFLAGS=$(AM_FFLAGS)
+fortranlib_test_CFLAGS=$(AM_CFLAGS)
+
+fortranlib_test_SOURCES = fortranlib_test.f90 \
+        tH5F.f90 tH5D.f90 tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 \
+        tH5Sselect.f90 tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tf.f90 \
+        t.c
+fflush1_SOURCES=fflush1.f90
+fflush2_SOURCES=fflush2.f90
+
+# The fortran test library depends on the main fortran library.
+# The tests depend on both fortran libraries and both main libraries.
+LIBADD=$(LIBH5TEST) $(LIBHDF5) $(LIBH5F)
+LDADD=$(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
+
+# Temporary files
+MOSTLYCLEANFILES=*.h5 *.tmp
+
+# Fortran dependencies must be hardcoded, unfortunately.
+#FORTLIBTEST_OBJ= fortranlib_test.lo                                    \
+        tH5F.lo tH5D.lo tH5R.lo tH5S.lo tH5T.lo tH5VL.lo tH5Z.lo       \
+        tH5Sselect.lo tH5P.lo tH5A.lo tH5I.lo tH5G.lo tH5E.lo tf.lo    \
+        t.lo
+#fortranlib_test$(EXEEXT): $(FORTLIBTEST_OBJ)
+
+include $(top_srcdir)/config/conclude.am
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
index f7d4586..f7a318a 100644
--- a/fortran/test/Makefile.in
+++ b/fortran/test/Makefile.in
@@ -1,65 +1,957 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-## HDF5-Fortran test/Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=../..
-srcdir=@srcdir@
-@COMMENCE@
-
-HDF_FORTRAN="yes"
-
-hdf5_srcdir=$(top_srcdir)/src 
-hdf5_builddir=$(top_builddir)/src
-CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) @CPPFLAGS@
-FSEARCH_DIRS=@F9XMODFLAG@../src @FSEARCH_DIRS@
-
-## Add include directory to the C preprocessor flags and the h5test and hdf5
-## libraries to the library list.
-FLIB=../src/libhdf5_fortran.la
-HDF5LIB=$(hdf5_builddir)/libhdf5.la
-TCLIB=../../test/.libs/libh5test.a
-LIB=libh5test_fortran.la
-LIB_CSRC=t.c
-LIB_FSRC=tf.f90
-LIB_OBJ=$(LIB_FSRC:.f90=.lo) $(LIB_CSRC:.c=.lo)
-
-TEST_PROGS_SRC=fortranlib_test.f90 fflush1.f90 fflush2.f90
-TEST_PROGS=$(TEST_PROGS_SRC:.f90=)
-
-# fortranlib_test settting
-FORTLIBTEST_FSRC=fortranlib_test.f90 \
-	tH5F.f90 tH5D.f90 tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90\
-	tH5Sselect.f90 tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tf.f90
-FORTLIBTEST_CSRC = t.c
-FORTLIBTEST_OBJ=$(FORTLIBTEST_FSRC:.f90=.lo) $(FORTLIBTEST_CSRC:.c=.lo)
-
-TEST_OBJ=$(FORTLIBTEST_OBJ) $(TEST_PROGS_SRC:.f90=.lo)
-PUB_LIB=
-
-## Temporary files
-MOSTLYCLEAN=*.h5 *.tmp
-
-$(TEST_PROGS): $(LIB) $(FLIB) 
-
-fortranlib_test: $(FORTLIBTEST_OBJ)
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ $(FORTLIBTEST_OBJ) $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
-
-fflush1: fflush1.lo 
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush1.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
-
-fflush2: fflush2.lo 
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush2.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
-
-@CONCLUDE@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# HDF5-Fortran test/Makefile(.in)
+#
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+# Include files
+AM_FFLAGS = -I$(top_builddir)/fortran/src -M$(top_builddir)/fortran/src
+AM_CFLAGS = -I$(top_srcdir)/src
+
+# The Fortran test library
+lib_LTLIBRARIES = libh5test_fortran.la
+
+# Our main targets, the tests themselves
+TEST_PROG = fortranlib_test fflush1 fflush2
+check_PROGRAMS = $(TEST_PROG)
+
+libh5test_fortran_la_SOURCES = fortranlib_test.f90 tH5F.f90 tH5D.f90 \
+        tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 tH5Sselect.f90 \
+        tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tf.f90 t.c
+
+
+libh5test_fortran_la_LDFLAGS = -static
+
+# Source files are used for both the library and fortranlib_test.
+# Automake will complain about this without the following workaround.
+fortranlib_test_FFLAGS = $(AM_FFLAGS)
+fortranlib_test_CFLAGS = $(AM_CFLAGS)
+
+fortranlib_test_SOURCES = fortranlib_test.f90 \
+        tH5F.f90 tH5D.f90 tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 \
+        tH5Sselect.f90 tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tf.f90 \
+        t.c
+
+fflush1_SOURCES = fflush1.f90
+fflush2_SOURCES = fflush2.f90
+
+# The fortran test library depends on the main fortran library.
+# The tests depend on both fortran libraries and both main libraries.
+LIBADD = $(LIBH5TEST) $(LIBHDF5) $(LIBH5F)
+LDADD = $(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
+
+# Temporary files
+MOSTLYCLEANFILES = *.h5 *.tmp
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+subdir = fortran/test
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+LTLIBRARIES = $(lib_LTLIBRARIES)
+
+libh5test_fortran_la_LIBADD =
+am_libh5test_fortran_la_OBJECTS = fortranlib_test.lo tH5F.lo tH5D.lo \
+	tH5R.lo tH5S.lo tH5T.lo tH5VL.lo tH5Z.lo tH5Sselect.lo tH5P.lo \
+	tH5A.lo tH5I.lo tH5G.lo tH5E.lo tf.lo t.lo
+libh5test_fortran_la_OBJECTS = $(am_libh5test_fortran_la_OBJECTS)
+check_PROGRAMS = fortranlib_test$(EXEEXT) fflush1$(EXEEXT) \
+	fflush2$(EXEEXT)
+am_fflush1_OBJECTS = fflush1.$(OBJEXT)
+fflush1_OBJECTS = $(am_fflush1_OBJECTS)
+fflush1_LDADD = $(LDADD)
+fflush1_DEPENDENCIES = $(top_builddir)/fortran/test/libh5test_fortran.la \
+	$(top_builddir)/test/libh5test.la \
+	$(top_builddir)/fortran/src/libhdf5_fortran.la \
+	$(top_builddir)/src/libhdf5.la
+fflush1_LDFLAGS =
+am_fflush2_OBJECTS = fflush2.$(OBJEXT)
+fflush2_OBJECTS = $(am_fflush2_OBJECTS)
+fflush2_LDADD = $(LDADD)
+fflush2_DEPENDENCIES = $(top_builddir)/fortran/test/libh5test_fortran.la \
+	$(top_builddir)/test/libh5test.la \
+	$(top_builddir)/fortran/src/libhdf5_fortran.la \
+	$(top_builddir)/src/libhdf5.la
+fflush2_LDFLAGS =
+am_fortranlib_test_OBJECTS = fortranlib_test-fortranlib_test.$(OBJEXT) \
+	fortranlib_test-tH5F.$(OBJEXT) fortranlib_test-tH5D.$(OBJEXT) \
+	fortranlib_test-tH5R.$(OBJEXT) fortranlib_test-tH5S.$(OBJEXT) \
+	fortranlib_test-tH5T.$(OBJEXT) fortranlib_test-tH5VL.$(OBJEXT) \
+	fortranlib_test-tH5Z.$(OBJEXT) \
+	fortranlib_test-tH5Sselect.$(OBJEXT) \
+	fortranlib_test-tH5P.$(OBJEXT) fortranlib_test-tH5A.$(OBJEXT) \
+	fortranlib_test-tH5I.$(OBJEXT) fortranlib_test-tH5G.$(OBJEXT) \
+	fortranlib_test-tH5E.$(OBJEXT) fortranlib_test-tf.$(OBJEXT) \
+	fortranlib_test-t.$(OBJEXT)
+fortranlib_test_OBJECTS = $(am_fortranlib_test_OBJECTS)
+fortranlib_test_LDADD = $(LDADD)
+fortranlib_test_DEPENDENCIES = \
+	$(top_builddir)/fortran/test/libh5test_fortran.la \
+	$(top_builddir)/test/libh5test.la \
+	$(top_builddir)/fortran/src/libhdf5_fortran.la \
+	$(top_builddir)/src/libhdf5.la
+fortranlib_test_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/src
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/fortranlib_test-t.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/t.Plo
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+F77COMPILE = $(F77) $(AM_FFLAGS) $(FFLAGS)
+LTF77COMPILE = $(LIBTOOL) --mode=compile $(F77) $(AM_FFLAGS) $(FFLAGS)
+F77LD = $(F77)
+F77LINK = $(LIBTOOL) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libh5test_fortran_la_SOURCES) $(fflush1_SOURCES) \
+	$(fflush2_SOURCES) $(fortranlib_test_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(libh5test_fortran_la_SOURCES) $(fflush1_SOURCES) $(fflush2_SOURCES) $(fortranlib_test_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .f90 .lo .o .obj
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  fortran/test/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+libLTLIBRARIES_INSTALL = $(INSTALL)
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
+	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test -z "$dir" && dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libh5test_fortran.la: $(libh5test_fortran_la_OBJECTS) $(libh5test_fortran_la_DEPENDENCIES) 
+	$(F77LINK) -rpath $(libdir) $(libh5test_fortran_la_LDFLAGS) $(libh5test_fortran_la_OBJECTS) $(libh5test_fortran_la_LIBADD) $(LIBS)
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+fflush1$(EXEEXT): $(fflush1_OBJECTS) $(fflush1_DEPENDENCIES) 
+	@rm -f fflush1$(EXEEXT)
+	$(F77LINK) $(fflush1_LDFLAGS) $(fflush1_OBJECTS) $(fflush1_LDADD) $(LIBS)
+fflush2$(EXEEXT): $(fflush2_OBJECTS) $(fflush2_DEPENDENCIES) 
+	@rm -f fflush2$(EXEEXT)
+	$(F77LINK) $(fflush2_LDFLAGS) $(fflush2_OBJECTS) $(fflush2_LDADD) $(LIBS)
+fortranlib_test-fortranlib_test.$(OBJEXT): fortranlib_test.f90
+fortranlib_test-tH5F.$(OBJEXT): tH5F.f90
+fortranlib_test-tH5D.$(OBJEXT): tH5D.f90
+fortranlib_test-tH5R.$(OBJEXT): tH5R.f90
+fortranlib_test-tH5S.$(OBJEXT): tH5S.f90
+fortranlib_test-tH5T.$(OBJEXT): tH5T.f90
+fortranlib_test-tH5VL.$(OBJEXT): tH5VL.f90
+fortranlib_test-tH5Z.$(OBJEXT): tH5Z.f90
+fortranlib_test-tH5Sselect.$(OBJEXT): tH5Sselect.f90
+fortranlib_test-tH5P.$(OBJEXT): tH5P.f90
+fortranlib_test-tH5A.$(OBJEXT): tH5A.f90
+fortranlib_test-tH5I.$(OBJEXT): tH5I.f90
+fortranlib_test-tH5G.$(OBJEXT): tH5G.f90
+fortranlib_test-tH5E.$(OBJEXT): tH5E.f90
+fortranlib_test-tf.$(OBJEXT): tf.f90
+fortranlib_test-t.$(OBJEXT): t.c
+fortranlib_test$(EXEEXT): $(fortranlib_test_OBJECTS) $(fortranlib_test_DEPENDENCIES) 
+	@rm -f fortranlib_test$(EXEEXT)
+	$(F77LINK) $(fortranlib_test_LDFLAGS) $(fortranlib_test_OBJECTS) $(fortranlib_test_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fortranlib_test-t.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t.Plo@am__quote@
+
+distclean-depend:
+	-rm -rf ./$(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+
+.c.lo:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+fortranlib_test-t.o: t.c
+@AMDEP_TRUE@	source='t.c' object='fortranlib_test-t.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/fortranlib_test-t.Po' tmpdepfile='$(DEPDIR)/fortranlib_test-t.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fortranlib_test_CFLAGS) $(CFLAGS) -c -o fortranlib_test-t.o `test -f 't.c' || echo '$(srcdir)/'`t.c
+
+fortranlib_test-t.obj: t.c
+@AMDEP_TRUE@	source='t.c' object='fortranlib_test-t.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/fortranlib_test-t.Po' tmpdepfile='$(DEPDIR)/fortranlib_test-t.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fortranlib_test_CFLAGS) $(CFLAGS) -c -o fortranlib_test-t.obj `cygpath -w t.c`
+
+fortranlib_test-t.lo: t.c
+@AMDEP_TRUE@	source='t.c' object='fortranlib_test-t.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/fortranlib_test-t.Plo' tmpdepfile='$(DEPDIR)/fortranlib_test-t.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fortranlib_test_CFLAGS) $(CFLAGS) -c -o fortranlib_test-t.lo `test -f 't.c' || echo '$(srcdir)/'`t.c
+CCDEPMODE = @CCDEPMODE@
+
+.f90.o:
+	$(F77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+.f90.obj:
+	$(F77COMPILE) -c -o $@ `cygpath -w $<`
+
+.f90.lo:
+	$(LTF77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+fortranlib_test-fortranlib_test.o: fortranlib_test.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-fortranlib_test.o `test -f 'fortranlib_test.f90' || echo '$(srcdir)/'`fortranlib_test.f90
+
+fortranlib_test-fortranlib_test.obj: fortranlib_test.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-fortranlib_test.obj `cygpath -w fortranlib_test.f90`
+
+fortranlib_test-fortranlib_test.lo: fortranlib_test.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-fortranlib_test.lo `test -f 'fortranlib_test.f90' || echo '$(srcdir)/'`fortranlib_test.f90
+
+fortranlib_test-tH5F.o: tH5F.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5F.o `test -f 'tH5F.f90' || echo '$(srcdir)/'`tH5F.f90
+
+fortranlib_test-tH5F.obj: tH5F.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5F.obj `cygpath -w tH5F.f90`
+
+fortranlib_test-tH5F.lo: tH5F.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5F.lo `test -f 'tH5F.f90' || echo '$(srcdir)/'`tH5F.f90
+
+fortranlib_test-tH5D.o: tH5D.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5D.o `test -f 'tH5D.f90' || echo '$(srcdir)/'`tH5D.f90
+
+fortranlib_test-tH5D.obj: tH5D.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5D.obj `cygpath -w tH5D.f90`
+
+fortranlib_test-tH5D.lo: tH5D.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5D.lo `test -f 'tH5D.f90' || echo '$(srcdir)/'`tH5D.f90
+
+fortranlib_test-tH5R.o: tH5R.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5R.o `test -f 'tH5R.f90' || echo '$(srcdir)/'`tH5R.f90
+
+fortranlib_test-tH5R.obj: tH5R.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5R.obj `cygpath -w tH5R.f90`
+
+fortranlib_test-tH5R.lo: tH5R.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5R.lo `test -f 'tH5R.f90' || echo '$(srcdir)/'`tH5R.f90
+
+fortranlib_test-tH5S.o: tH5S.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5S.o `test -f 'tH5S.f90' || echo '$(srcdir)/'`tH5S.f90
+
+fortranlib_test-tH5S.obj: tH5S.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5S.obj `cygpath -w tH5S.f90`
+
+fortranlib_test-tH5S.lo: tH5S.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5S.lo `test -f 'tH5S.f90' || echo '$(srcdir)/'`tH5S.f90
+
+fortranlib_test-tH5T.o: tH5T.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5T.o `test -f 'tH5T.f90' || echo '$(srcdir)/'`tH5T.f90
+
+fortranlib_test-tH5T.obj: tH5T.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5T.obj `cygpath -w tH5T.f90`
+
+fortranlib_test-tH5T.lo: tH5T.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5T.lo `test -f 'tH5T.f90' || echo '$(srcdir)/'`tH5T.f90
+
+fortranlib_test-tH5VL.o: tH5VL.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5VL.o `test -f 'tH5VL.f90' || echo '$(srcdir)/'`tH5VL.f90
+
+fortranlib_test-tH5VL.obj: tH5VL.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5VL.obj `cygpath -w tH5VL.f90`
+
+fortranlib_test-tH5VL.lo: tH5VL.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5VL.lo `test -f 'tH5VL.f90' || echo '$(srcdir)/'`tH5VL.f90
+
+fortranlib_test-tH5Z.o: tH5Z.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Z.o `test -f 'tH5Z.f90' || echo '$(srcdir)/'`tH5Z.f90
+
+fortranlib_test-tH5Z.obj: tH5Z.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Z.obj `cygpath -w tH5Z.f90`
+
+fortranlib_test-tH5Z.lo: tH5Z.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Z.lo `test -f 'tH5Z.f90' || echo '$(srcdir)/'`tH5Z.f90
+
+fortranlib_test-tH5Sselect.o: tH5Sselect.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Sselect.o `test -f 'tH5Sselect.f90' || echo '$(srcdir)/'`tH5Sselect.f90
+
+fortranlib_test-tH5Sselect.obj: tH5Sselect.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Sselect.obj `cygpath -w tH5Sselect.f90`
+
+fortranlib_test-tH5Sselect.lo: tH5Sselect.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5Sselect.lo `test -f 'tH5Sselect.f90' || echo '$(srcdir)/'`tH5Sselect.f90
+
+fortranlib_test-tH5P.o: tH5P.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5P.o `test -f 'tH5P.f90' || echo '$(srcdir)/'`tH5P.f90
+
+fortranlib_test-tH5P.obj: tH5P.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5P.obj `cygpath -w tH5P.f90`
+
+fortranlib_test-tH5P.lo: tH5P.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5P.lo `test -f 'tH5P.f90' || echo '$(srcdir)/'`tH5P.f90
+
+fortranlib_test-tH5A.o: tH5A.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5A.o `test -f 'tH5A.f90' || echo '$(srcdir)/'`tH5A.f90
+
+fortranlib_test-tH5A.obj: tH5A.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5A.obj `cygpath -w tH5A.f90`
+
+fortranlib_test-tH5A.lo: tH5A.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5A.lo `test -f 'tH5A.f90' || echo '$(srcdir)/'`tH5A.f90
+
+fortranlib_test-tH5I.o: tH5I.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5I.o `test -f 'tH5I.f90' || echo '$(srcdir)/'`tH5I.f90
+
+fortranlib_test-tH5I.obj: tH5I.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5I.obj `cygpath -w tH5I.f90`
+
+fortranlib_test-tH5I.lo: tH5I.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5I.lo `test -f 'tH5I.f90' || echo '$(srcdir)/'`tH5I.f90
+
+fortranlib_test-tH5G.o: tH5G.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5G.o `test -f 'tH5G.f90' || echo '$(srcdir)/'`tH5G.f90
+
+fortranlib_test-tH5G.obj: tH5G.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5G.obj `cygpath -w tH5G.f90`
+
+fortranlib_test-tH5G.lo: tH5G.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5G.lo `test -f 'tH5G.f90' || echo '$(srcdir)/'`tH5G.f90
+
+fortranlib_test-tH5E.o: tH5E.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5E.o `test -f 'tH5E.f90' || echo '$(srcdir)/'`tH5E.f90
+
+fortranlib_test-tH5E.obj: tH5E.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5E.obj `cygpath -w tH5E.f90`
+
+fortranlib_test-tH5E.lo: tH5E.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tH5E.lo `test -f 'tH5E.f90' || echo '$(srcdir)/'`tH5E.f90
+
+fortranlib_test-tf.o: tf.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tf.o `test -f 'tf.f90' || echo '$(srcdir)/'`tf.f90
+
+fortranlib_test-tf.obj: tf.f90
+	$(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tf.obj `cygpath -w tf.f90`
+
+fortranlib_test-tf.lo: tf.f90
+	$(LIBTOOL) --mode=compile $(F77) $(fortranlib_test_FFLAGS) $(FFLAGS) -c -o fortranlib_test-tf.lo `test -f 'tf.f90' || echo '$(srcdir)/'`tf.f90
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
+
+.PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \
+	clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool distclean distclean-compile distclean-depend \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-libLTLIBRARIES install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	tags uninstall uninstall-am uninstall-info-am \
+	uninstall-libLTLIBRARIES
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+lib progs tests ::
+	@$(MAKE) build-$@ || exit 1;                                          \
+	for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X -a $$d != .; then                                \
+	        (set -x; cd $$d && $(MAKE) $@) || exit 1;                     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test: $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	   echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+        fi
+	@for test in $(TEST_PROG) dummy; do                                  \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNTEST) ./$$test $(TEST_FLAGS) ||                         \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNPARALLEL) ./$$test $(TEST_FLAGS) ||                     \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@for test in $(TEST_SCRIPT) dummy; do                                \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	         srcdir="$(srcdir)"                                           \
+	         /bin/sh $$test $(TEST_FLAGS) ||                              \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	  fi;                                                                 \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	    echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd:
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        HDF5_DRIVER=$$vfd $(MAKE) check;                              \
+	    fi;                                                               \
+	done
+
+# Fortran dependencies must be hardcoded, unfortunately.
+#FORTLIBTEST_OBJ= fortranlib_test.lo                                    \
+#        tH5F.lo tH5D.lo tH5R.lo tH5S.lo tH5T.lo tH5VL.lo tH5Z.lo       \
+#        tH5Sselect.lo tH5P.lo tH5A.lo tH5I.lo tH5G.lo tH5E.lo tf.lo    \
+#        t.lo
+#fortranlib_test$(EXEEXT): $(FORTLIBTEST_OBJ)
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fortran/testpar/Dependencies b/fortran/testpar/Dependencies
deleted file mode 100644
index f29a269..0000000
--- a/fortran/testpar/Dependencies
+++ /dev/null
@@ -1,3 +0,0 @@
-## This file is machine generated on GNU systems.
-## Only temporary changes may be made here.
-
diff --git a/fortran/testpar/Makefile.am b/fortran/testpar/Makefile.am
new file mode 100644
index 0000000..fb32621
--- /dev/null
+++ b/fortran/testpar/Makefile.am
@@ -0,0 +1,45 @@
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+#
+# HDF5 Fortran Parallel Library Test Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+# Include files
+AM_FFLAGS=-I$(top_srcdir)/fortran/src -I$(top_srcdir)/fortran/test
+MODULE=$(top_srcdir)/fortran/src
+
+# These are our main targets
+TEST_PROG_PARA=ptesthdf5_fortran
+check_PROGRAMS=$(TEST_PROG_PARA)
+
+# Temporary files
+MOSTLYCLEAN=ParaEg[123].h5f
+DISTCLEAN=go
+
+# Test source files
+ptesthdf5_fortran_SOURCES=thdf5.f90 ptesthdf5_fortran.f90 thyperslab_wr.f90
+
+# The tests depend on several libraries.
+LDADD=$(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
+
+# Put in dependencies to the THDF5 module so that things will be built
+# in the correct order.
+thyperslab_wr.lo:           $(srcdir)/thyperslab_wr.f90 thdf5.lo
+ptesthdf5_fortran.lo:       $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo
+
+include $(top_srcdir)/config/conclude.am
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
index 916c021..cca643d 100644
--- a/fortran/testpar/Makefile.in
+++ b/fortran/testpar/Makefile.in
@@ -1,63 +1,654 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-## HDF5 Fortran Parallel Library Test Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=../..
-srcdir=@srcdir@
-@COMMENCE@
-
-HDF_FORTRAN="yes"
-
-hdf5_builddir=$(top_builddir)/src
-
-## Add the include directory to the C preprocessor flags the the hdf5 library
-## to the library list.
-LIBFORTRAN=../src/libhdf5_fortran.la
-LIBHDF5=$(hdf5_builddir)/libhdf5.la
-FTLIB=../test/libh5test_fortran.la
-CTLIB=../../test/libh5test.la
-FSEARCH_DIRS =@F9XMODFLAG@../src @FSEARCH_DIRS@
-
-## These tests are parallel
-RUNTEST=$(RUNPARALLEL)
-
-## These are our main targets
-TEST_PROGS=ptesthdf5_fortran
-
-## Temporary files
-MOSTLYCLEAN=ParaEg[123].h5f
-DISTCLEAN=go
-
-## Test source files
-TEST_PFORTRAN_SRC=ptesthdf5_fortran.f90 thdf5.f90 thyperslab_wr.f90
-TEST_PFORTRAN_OBJ=$(TEST_PFORTRAN_SRC:.f90=.lo)
-TEST_SRC=$(TEST_PFORTRAN_SRC)
-TEST_OBJ=$(TEST_SRC:.f90=.lo)
-TEST_HDR=
-
-## How to build the tests... They all depend on the hdf5 library
-$(TEST_PROGS): $(LIBHDF5)
-
-$(TEST_OBJ): $(TEST_HDR)
-
-## Put in dependencies to the THDF5 module so that things will be built
-## in the correct order.
-thyperslab_wr.lo:	    $(srcdir)/thyperslab_wr.f90 thdf5.lo
-ptesthdf5_fortran.lo:	    $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo
-
-ptesthdf5_fortran: thdf5.lo thyperslab_wr.lo ptesthdf5_fortran.lo
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ ptesthdf5_fortran.lo thdf5.lo thyperslab_wr.lo $(FTLIB) $(CTLIB) $(LIBFORTRAN) $(LIBHDF5) $(LIBS)
-
-@CONCLUDE@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+#
+# HDF5 Fortran Parallel Library Test Makefile(.in)
+#
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+# Include files
+AM_FFLAGS = -I$(top_srcdir)/fortran/src -I$(top_srcdir)/fortran/test
+MODULE = $(top_srcdir)/fortran/src
+
+# These are our main targets
+TEST_PROG_PARA = ptesthdf5_fortran
+check_PROGRAMS = $(TEST_PROG_PARA)
+
+# Temporary files
+MOSTLYCLEAN = ParaEg[123].h5f
+DISTCLEAN = go
+
+# Test source files
+ptesthdf5_fortran_SOURCES = thdf5.f90 ptesthdf5_fortran.f90 thyperslab_wr.f90
+
+# The tests depend on several libraries.
+LDADD = $(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+subdir = fortran/testpar
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+check_PROGRAMS = ptesthdf5_fortran$(EXEEXT)
+am_ptesthdf5_fortran_OBJECTS = thdf5.$(OBJEXT) \
+	ptesthdf5_fortran.$(OBJEXT) thyperslab_wr.$(OBJEXT)
+ptesthdf5_fortran_OBJECTS = $(am_ptesthdf5_fortran_OBJECTS)
+ptesthdf5_fortran_LDADD = $(LDADD)
+ptesthdf5_fortran_DEPENDENCIES = \
+	$(top_builddir)/fortran/test/libh5test_fortran.la \
+	$(top_builddir)/test/libh5test.la \
+	$(top_builddir)/fortran/src/libhdf5_fortran.la \
+	$(top_builddir)/src/libhdf5.la
+ptesthdf5_fortran_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/src
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+F77COMPILE = $(F77) $(AM_FFLAGS) $(FFLAGS)
+LTF77COMPILE = $(LIBTOOL) --mode=compile $(F77) $(AM_FFLAGS) $(FFLAGS)
+F77LD = $(F77)
+F77LINK = $(LIBTOOL) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(ptesthdf5_fortran_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(ptesthdf5_fortran_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .f90 .lo .o .obj
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  fortran/testpar/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+ptesthdf5_fortran$(EXEEXT): $(ptesthdf5_fortran_OBJECTS) $(ptesthdf5_fortran_DEPENDENCIES) 
+	@rm -f ptesthdf5_fortran$(EXEEXT)
+	$(F77LINK) $(ptesthdf5_fortran_LDFLAGS) $(ptesthdf5_fortran_OBJECTS) $(ptesthdf5_fortran_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.f90.o:
+	$(F77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+.f90.obj:
+	$(F77COMPILE) -c -o $@ `cygpath -w $<`
+
+.f90.lo:
+	$(LTF77COMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile all-local
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \
+	clean-checkPROGRAMS clean-generic clean-libtool distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	tags uninstall uninstall-am uninstall-info-am
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# Put in dependencies to the THDF5 module so that things will be built
+# in the correct order.
+thyperslab_wr.lo:           $(srcdir)/thyperslab_wr.f90 thdf5.lo
+ptesthdf5_fortran.lo:       $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+lib progs tests ::
+	@$(MAKE) build-$@ || exit 1;                                          \
+	for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X -a $$d != .; then                                \
+	        (set -x; cd $$d && $(MAKE) $@) || exit 1;                     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test: $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	   echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+        fi
+	@for test in $(TEST_PROG) dummy; do                                  \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNTEST) ./$$test $(TEST_FLAGS) ||                         \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      srcdir="$(srcdir)"                                              \
+	         $(RUNPARALLEL) ./$$test $(TEST_FLAGS) ||                     \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	   fi;                                                                \
+	done;                                                                 \
+	test $$test = dummy || false
+	@for test in $(TEST_SCRIPT) dummy; do                                \
+	   if test $$test != dummy; then                                      \
+	      echo "============================";                            \
+	      if test "X$(HDF_FORTRAN)" = "Xyes"; then                        \
+	         echo "Fortran API: Testing $$test $(TEST_FLAGS)";            \
+	      elif test "X$(HDF_CXX)" = "Xyes"; then                          \
+	         echo "C++ API: Testing $$test $(TEST_FLAGS)";                \
+	      else                                                            \
+	         echo "Testing $$test $(TEST_FLAGS)";                         \
+	      fi;                                                             \
+	      echo "============================";                            \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	         srcdir="$(srcdir)"                                           \
+	         /bin/sh $$test $(TEST_FLAGS) ||                              \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
+	         break;                                                       \
+	      echo "";                                                        \
+	  fi;                                                                 \
+	done;                                                                 \
+	test $$test = dummy || false
+	@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then      \
+	    echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd:
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        HDF5_DRIVER=$$vfd $(MAKE) check;                              \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: