summaryrefslogtreecommitdiffstats
path: root/fortran
diff options
context:
space:
mode:
Diffstat (limited to 'fortran')
-rw-r--r--fortran/Makefile.in68
-rw-r--r--fortran/examples/Makefile.in67
-rw-r--r--fortran/src/Makefile.am9
-rw-r--r--fortran/src/Makefile.in77
-rw-r--r--fortran/test/Makefile.in67
-rw-r--r--fortran/testpar/Makefile.in68
6 files changed, 267 insertions, 89 deletions
diff --git a/fortran/Makefile.in b/fortran/Makefile.in
index 69a0d9b..127300a 100644
--- a/fortran/Makefile.in
+++ b/fortran/Makefile.in
@@ -285,7 +285,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
# Subdirectories in build order, not including examples directory
@@ -624,6 +633,12 @@ uninstall-info: uninstall-info-recursive
tags tags-recursive uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# Clean and mostlyclean need to recurse into examples directory
clean-local:
if test -f examples/Makefile; then \
@@ -647,14 +662,16 @@ installcheck-local:
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -666,6 +683,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -694,8 +713,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -703,26 +729,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -730,21 +762,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 22ee3ed..b9404dc 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -273,9 +273,17 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
# Tell automake which files to clean
-MOSTLYCLEANFILES = *.chkexe *.chksh $(EXTRA_PROG:=.o)
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) $(EXTRA_PROG:=.o)
# Compile parallel fortran examples only if parallel is enabled
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example
@@ -490,6 +498,12 @@ uninstall-am: uninstall-info-am uninstall-local
uninstall uninstall-am uninstall-info-am uninstall-local
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# Some examples depend on files created by other examples.
grpdsetexample.chkexe_: grpsexample.chkexe_
refregexample.chkexe_: refobjexample.chkexe_
@@ -555,14 +569,16 @@ ph5example: ph5example.f90
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -574,6 +590,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -602,8 +620,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -611,26 +636,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -638,21 +669,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am
index 83e71e8..cc46d1c 100644
--- a/fortran/src/Makefile.am
+++ b/fortran/src/Makefile.am
@@ -20,9 +20,9 @@
include $(top_srcdir)/config/commence.am
# Include src directory in both Fortran and C flags (C compiler is used
-# for linking)
+# for linking).
INCLUDES = -I$(top_srcdir)/src
-AM_FCFLAGS=-I$(top_srcdir)/src
+AM_FCFLAGS=-I$(top_srcdir)/src -I$(top_srcdir)/src/fortran
AM_FCLIBS=$(LIBHDF5)
@@ -124,11 +124,6 @@ H5fortran_types.f90 H5f90i_gen.h: H5match_types.c H5fort_type_defines.h
$(MAKE) $(AM_MAKEFLAGS) H5match_types$(EXEEXT)
$(RUNSERIAL) ./H5match_types$(EXEEXT)
-
-# JAMES: does it need to work like this? $(MAKE) $(AM_MAKEFLAGS) H5fort_type_defines.h
-# JAMES $(MAKE) $(AM_MAKEFLAGS) H5match_types$(EXEEXT)
-# JAMES $(RUNSERIAL) ./H5match_types$(EXEEXT)
-
# H5fort_type_defines.h is created by running H5fortran_detect.
# Obviously, H5fortran_detect needs to be built first.
H5fort_type_defines.h: H5fortran_detect$(EXEEXT)
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 879c5f0..5fb6ecf 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -340,17 +340,25 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
# H5fortran_types.f90 and H5f90i.h are automatically generaed by
# H5match_types, and must be cleaned explicitly. H5fort_type_defines.h
# is generated by H5fortran_detect
-MOSTLYCLEANFILES = *.chkexe *.chksh H5fortran_types.f90 H5f90i_gen.h \
- H5fort_type_defines.h H5fortran_detect.f90
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) H5fortran_types.f90 \
+ H5f90i_gen.h H5fort_type_defines.h H5fortran_detect.f90
# Include src directory in both Fortran and C flags (C compiler is used
-# for linking)
+# for linking).
INCLUDES = -I$(top_srcdir)/src
-AM_FCFLAGS = -I$(top_srcdir)/src
+AM_FCFLAGS = -I$(top_srcdir)/src -I$(top_srcdir)/src/fortran
AM_FCLIBS = $(LIBHDF5)
# Fortran libraries are linked statically to solve a build problem.
@@ -765,6 +773,12 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
uninstall-settingsDATA
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# Fortran module files can have different extensions and different names
# (e.g., different capitalizations) on different platforms. Write rules
# for them explicitly rather than trying to teach automake about them.
@@ -800,10 +814,6 @@ H5fortran_types.f90 H5f90i_gen.h: H5match_types.c H5fort_type_defines.h
$(MAKE) $(AM_MAKEFLAGS) H5match_types$(EXEEXT)
$(RUNSERIAL) ./H5match_types$(EXEEXT)
-# JAMES: does it need to work like this? $(MAKE) $(AM_MAKEFLAGS) H5fort_type_defines.h
-# JAMES $(MAKE) $(AM_MAKEFLAGS) H5match_types$(EXEEXT)
-# JAMES $(RUNSERIAL) ./H5match_types$(EXEEXT)
-
# H5fort_type_defines.h is created by running H5fortran_detect.
# Obviously, H5fortran_detect needs to be built first.
H5fort_type_defines.h: H5fortran_detect$(EXEEXT)
@@ -844,14 +854,16 @@ HDF5mpio.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5Aff.lo \
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -863,6 +875,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -891,8 +905,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -900,26 +921,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -927,21 +954,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
index 5c4e3ab..06dbb96 100644
--- a/fortran/test/Makefile.in
+++ b/fortran/test/Makefile.in
@@ -342,9 +342,17 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
# Temporary files
-MOSTLYCLEANFILES = *.chkexe *.chksh *.h5 *.tmp
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 *.tmp
# Include files
AM_FCFLAGS = -I$(top_builddir)/fortran/src $(F9XMODFLAG)$(top_builddir)/fortran/src
@@ -807,16 +815,24 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
uninstall-am uninstall-info-am uninstall-libLTLIBRARIES
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -828,6 +844,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -856,8 +874,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -865,26 +890,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -892,21 +923,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
index b461725..374c2cb 100644
--- a/fortran/testpar/Makefile.in
+++ b/fortran/testpar/Makefile.in
@@ -297,7 +297,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
# Include files
AM_FCFLAGS = -I$(top_srcdir)/fortran/src -I$(top_srcdir)/fortran/test $(F9XMODFLAG)$(top_builddir)/fortran/src
@@ -575,16 +584,24 @@ uninstall-am: uninstall-info-am
tags uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -596,6 +613,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -624,8 +643,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -633,26 +659,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -660,21 +692,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \