summaryrefslogtreecommitdiffstats
path: root/fortran
diff options
context:
space:
mode:
Diffstat (limited to 'fortran')
-rwxr-xr-xfortran/configure2020
-rw-r--r--fortran/configure.in2
2 files changed, 1281 insertions, 741 deletions
diff --git a/fortran/configure b/fortran/configure
index 7dc0aaa..35a4de9 100755
--- a/fortran/configure
+++ b/fortran/configure
@@ -1,7 +1,7 @@
#! /bin/sh
# From configure.in Id: configure.in.
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.53 for HDF5 Fortran 1.5.61.
+# Generated by GNU Autoconf 2.57 for HDF5 Fortran 1.5.62.
#
# Report bugs to <hdfhelp@ncsa.uiuc.edu>.
#
@@ -9,173 +9,6 @@
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-
-# Find the correct PATH separator. Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
- UNAME=${UNAME-`uname 2>/dev/null`}
- case X$UNAME in
- *-DOS) lt_cv_sys_path_separator=';' ;;
- *) lt_cv_sys_path_separator=':' ;;
- esac
- PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
@@ -184,11 +17,13 @@ fi
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-# NLS nuisances.
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
@@ -196,34 +31,42 @@ else
as_unset=false
fi
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
- { $as_unset LANG || test "${LANG+set}" != set; } ||
- { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
- { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
- { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
- { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
- { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
- { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
- { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
- { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
@@ -234,6 +77,7 @@ echo X/"$0" |
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
+
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -244,15 +88,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conftest.sh
- echo "exit 0" >>conftest.sh
- chmod +x conftest.sh
- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
- rm -f conftest.sh
+ rm -f conf$$.sh
fi
@@ -300,6 +144,8 @@ do
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
CONFIG_SHELL=$as_dir/$as_base
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -372,6 +218,12 @@ else
fi
rm -f conf$$ conf$$.exe conf$$.file
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
@@ -388,7 +240,166 @@ as_nl='
IFS=" $as_nl"
# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
+$as_unset CDPATH
+
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
+ PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+
+EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
# Name of the host.
@@ -402,6 +413,7 @@ exec 6>&1
# Initializations.
#
ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
cross_compiling=no
subdirs=
MFLAGS=
@@ -416,8 +428,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='HDF5 Fortran'
PACKAGE_TARNAME='hdf5-fortran'
-PACKAGE_VERSION='1.5.61'
-PACKAGE_STRING='HDF5 Fortran 1.5.61'
+PACKAGE_VERSION='1.5.62'
+PACKAGE_STRING='HDF5 Fortran 1.5.62'
PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
ac_unique_file="src/HDF5.f90"
@@ -458,6 +470,8 @@ ac_includes_default="\
# include <unistd.h>
#endif"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS FFLAGS FSEARCH_DIRS R_LARGE R_INTEGER HSIZE_T HSSIZE_T HID_T SIZE_T OBJECT_NAMELEN_DEFAULT_F ROOT F9XSUFFIXFLAG CC CFLAGS LDFLAGS ac_ct_CC EXEEXT OBJEXT CPP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP EGREP LIBTOOL PERL AR LT_STATIC_EXEC F9X F9XMODFLAG F9XMODEXT PARALLEL RUNSERIAL RUNPARALLEL TESTPARALLEL FILTERS ADD_PARALLEL_FILES H5_VERSION CONFIG_DATE CONFIG_USER CONFIG_MODE BYTESEX CC_VERSION FC_VERSION DYNAMIC_DIRS SEARCH SETX LIBOBJS LTLIBOBJS'
+ac_subst_files='DEPEND COMMENCE CONCLUDE'
# Initialize some variables set by options.
ac_init_help=
@@ -881,6 +895,9 @@ if test ! -r $srcdir/$ac_unique_file; then
{ (exit 1); exit 1; }; }
fi
fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
ac_env_build_alias_set=${build_alias+set}
ac_env_build_alias_value=$build_alias
@@ -922,7 +939,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures HDF5 Fortran 1.5.61 to adapt to many kinds of systems.
+\`configure' configures HDF5 Fortran 1.5.62 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -983,7 +1000,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of HDF5 Fortran 1.5.61:";;
+ short | recursive ) echo "Configuration of HDF5 Fortran 1.5.62:";;
esac
cat <<\_ACEOF
@@ -1066,7 +1083,7 @@ esac
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
@@ -1092,8 +1109,8 @@ fi
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-HDF5 Fortran configure 1.5.61
-generated by GNU Autoconf 2.53
+HDF5 Fortran configure 1.5.62
+generated by GNU Autoconf 2.57
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
@@ -1107,8 +1124,8 @@ cat >&5 <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by HDF5 Fortran $as_me 1.5.61, which was
-generated by GNU Autoconf 2.53. Invocation command line was
+It was created by HDF5 Fortran $as_me 1.5.62, which was
+generated by GNU Autoconf 2.57. Invocation command line was
$ $0 $@
@@ -1160,27 +1177,54 @@ _ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
ac_sep=
-for ac_arg
+ac_must_keep_next=false
+for ac_pass in 1 2
do
- case $ac_arg in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n ) continue ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- ac_sep=" " ;;
- esac
- # Get rid of the leading space.
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1191,6 +1235,7 @@ trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
echo
+
cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
@@ -1213,6 +1258,35 @@ _ASBOX
esac;
}
echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
if test -s confdefs.h; then
cat <<\_ASBOX
## ----------- ##
@@ -1220,7 +1294,7 @@ _ASBOX
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h
+ sed "/^$/d" confdefs.h | sort
echo
fi
test "$ac_signal" != 0 &&
@@ -1386,7 +1460,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ac_config_headers="$ac_config_headers src/H5config_fortran.h"
+
+ ac_config_headers="$ac_config_headers src/H5config_fortran.h"
ac_aux_dir=
@@ -1415,7 +1490,7 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-ac_config_commands="$ac_config_commands default-1"
+ ac_config_commands="$ac_config_commands default-1"
# Make sure we can run config.sub.
@@ -1780,9 +1855,7 @@ if test $ac_prog_rejected = yes; then
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
- set dummy "$as_dir/$ac_word" ${1+"$@"}
- shift
- ac_cv_prog_CC="$@"
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
@@ -1887,8 +1960,10 @@ fi
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
@@ -1913,14 +1988,12 @@ ac_compiler=`set X $ac_compile; echo $2`
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -1930,7 +2003,7 @@ main ()
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
@@ -1949,26 +2022,39 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
# Be careful to initialize this variable, since it used to be cached.
# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
ac_cv_exeext=
-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
- ls a.out conftest 2>/dev/null;
- ls a.* conftest.* 2>/dev/null`; do
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
- a.out ) # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
- export ac_cv_exeext
- break;;
- * ) break;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
esac
done
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
-echo "$as_me: error: C compiler cannot create executables" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
fi
@@ -1995,9 +2081,11 @@ if test "$cross_compiling" != yes; then
cross_compiling=yes
else
{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&5
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
@@ -2005,7 +2093,7 @@ fi
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
-rm -f a.out a.exe conftest$ac_cv_exeext
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
@@ -2025,9 +2113,10 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
export ac_cv_exeext
break;;
@@ -2035,8 +2124,10 @@ for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -2054,14 +2145,12 @@ if test "${ac_cv_objext+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -2078,16 +2167,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(exit $ac_status); }; then
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -2104,14 +2196,12 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -2138,7 +2228,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2158,14 +2249,12 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -2189,7 +2278,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2211,6 +2301,102 @@ else
CFLAGS=
fi
fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
@@ -2243,15 +2429,13 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
do
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -2275,20 +2459,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
:
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -2312,7 +2495,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
break
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
@@ -2325,7 +2509,8 @@ fi
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
@@ -2357,18 +2542,28 @@ for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2385,7 +2580,8 @@ if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Broken: fails on valid input.
continue
fi
@@ -2395,13 +2591,17 @@ rm -f conftest.err conftest.$ac_ext
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2419,7 +2619,8 @@ if test -z "$ac_cpp_err"; then
continue
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Passes both tests.
ac_preproc_ok=:
break
@@ -2448,18 +2649,28 @@ for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2476,7 +2687,8 @@ if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Broken: fails on valid input.
continue
fi
@@ -2486,13 +2698,17 @@ rm -f conftest.err conftest.$ac_ext
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2510,7 +2726,8 @@ if test -z "$ac_cpp_err"; then
continue
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Passes both tests.
ac_preproc_ok=:
break
@@ -2523,8 +2740,10 @@ rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
:
else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -2534,15 +2753,15 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
all:
- @echo 'ac_maketemp="${MAKE}"'
+ @echo 'ac_maketemp="$(MAKE)"'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
@@ -3265,6 +3484,21 @@ echo "${ECHO_T}ok" >&6
fi
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
echo "$as_me:$LINENO: checking for ANSI C header files" >&5
echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
if test "${ac_cv_header_stdc+set}" = set; then
@@ -3272,48 +3506,59 @@ if test "${ac_cv_header_stdc+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_header_stdc=no
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <string.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
+ $EGREP "memchr" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
@@ -3326,12 +3571,16 @@ if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
+ $EGREP "free" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
@@ -3347,13 +3596,18 @@ if test $ac_cv_header_stdc = yes; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ctype.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
|| ('j' <= (c) && (c) <= 'r') \
|| ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
@@ -3386,11 +3640,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
fi
@@ -3425,7 +3680,11 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
@@ -3445,7 +3704,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_Header=no"
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -3480,7 +3740,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -3499,7 +3763,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -3511,13 +3776,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3534,7 +3803,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -3547,14 +3817,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -3895,7 +4183,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3898 "configure"' > conftest.$ac_ext
+ echo '#line 4186 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -3935,14 +4223,12 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -3966,7 +4252,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
lt_cv_cc_needs_belf=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
lt_cv_cc_needs_belf=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -4274,14 +4561,12 @@ else
CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -4320,7 +4605,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
lt_cv_prog_cc_pic_works=no
fi
@@ -4363,14 +4649,12 @@ else
LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -4394,7 +4678,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
lt_cv_prog_cc_static_works=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
@@ -4436,7 +4721,7 @@ chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
-if { (eval echo configure:4439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:4724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s out/conftest.err; then
@@ -4478,14 +4763,12 @@ else
ac_objext=lo
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -4516,7 +4799,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_objext="$save_objext"
@@ -4564,14 +4848,12 @@ echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_
compiler_rtti_exceptions=no
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -4602,7 +4884,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
@@ -5841,37 +6124,44 @@ if test "${ac_cv_func_shl_load+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below. */
-#include <assert.h>
+ which can conflict with char shl_load (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
-f = shl_load;
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+return f != shl_load;
;
return 0;
}
@@ -5891,7 +6181,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -5910,7 +6201,11 @@ else
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -5919,12 +6214,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -5948,7 +6237,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dld_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -5966,37 +6256,44 @@ if test "${ac_cv_func_dlopen+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen (); below. */
-#include <assert.h>
+ which can conflict with char dlopen (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
-f = dlopen;
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+return f != dlopen;
;
return 0;
}
@@ -6016,7 +6313,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6035,7 +6333,11 @@ else
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -6044,12 +6346,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -6073,7 +6369,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dl_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6093,7 +6390,11 @@ else
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -6102,12 +6403,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -6131,7 +6426,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_svld_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6151,7 +6447,11 @@ else
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -6160,12 +6460,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dld_link ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -6189,7 +6483,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_dld_dld_link=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dld_dld_link=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6247,7 +6542,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 6250 "configure"
+#line 6545 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -6345,7 +6640,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 6348 "configure"
+#line 6643 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -7289,7 +7584,11 @@ else
LIBS="-lm $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -7298,12 +7597,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char ceil ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -7327,7 +7620,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_m_ceil=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_m_ceil=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7356,7 +7650,11 @@ else
LIBS="-lsocket $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -7365,12 +7663,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char socket ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -7394,7 +7686,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_socket_socket=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_socket_socket=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7421,7 +7714,11 @@ else
LIBS="-lnsl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -7430,12 +7727,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char xdr_int ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -7459,7 +7750,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_nsl_xdr_int=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_nsl_xdr_int=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7822,7 +8114,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -7841,7 +8137,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -7853,13 +8150,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -7876,7 +8177,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -7889,14 +8191,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -7928,7 +8248,11 @@ else
LIBS="-lz $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -7937,12 +8261,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char compress2 ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -7966,7 +8284,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_z_compress2=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_z_compress2=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7992,37 +8311,44 @@ if test "${ac_cv_func_compress2+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char compress2 (); below. */
-#include <assert.h>
+ which can conflict with char compress2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_compress2) || defined (__stub___compress2)
choke me
#else
-f = compress2;
+char (*f) () = compress2;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+return f != compress2;
;
return 0;
}
@@ -8042,7 +8368,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_func_compress2=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_compress2=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8114,7 +8441,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -8133,7 +8464,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8145,13 +8477,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8168,7 +8504,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -8181,14 +8518,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8227,7 +8582,11 @@ else
LIBS="-lz $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -8236,12 +8595,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char compress2 ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -8265,7 +8618,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_z_compress2=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_z_compress2=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8291,37 +8645,44 @@ if test "${ac_cv_func_compress2+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char compress2 (); below. */
-#include <assert.h>
+ which can conflict with char compress2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_compress2) || defined (__stub___compress2)
choke me
#else
-f = compress2;
+char (*f) () = compress2;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+return f != compress2;
;
return 0;
}
@@ -8341,7 +8702,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_func_compress2=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_compress2=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8399,7 +8761,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -8418,7 +8784,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8430,13 +8797,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8453,7 +8824,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -8466,14 +8838,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8505,7 +8895,11 @@ else
LIBS="-lsz $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -8514,12 +8908,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -8543,7 +8931,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_sz_SZ_BufftoBuffCompress=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8623,7 +9012,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -8642,7 +9035,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8654,13 +9048,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8677,7 +9075,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -8690,14 +9089,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8736,7 +9153,11 @@ else
LIBS="-lsz $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
@@ -8745,12 +9166,6 @@ extern "C"
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -8774,7 +9189,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_sz_SZ_BufftoBuffCompress=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8840,7 +9256,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -8859,7 +9279,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8871,13 +9292,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8894,7 +9319,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -8907,14 +9333,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8946,7 +9390,11 @@ _ACEOF
echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdio.h>
#include <stdlib.h>
@@ -8960,12 +9408,6 @@ echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
#include <sys/socket.h>
#endif
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -8995,7 +9437,8 @@ _ACEOF
echo "${ECHO_T}yes" >&6
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
@@ -9017,7 +9460,7 @@ cat >confcache <<\_ACEOF
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
@@ -9052,7 +9495,7 @@ _ACEOF
t end
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
: end' >>confcache
-if cmp -s $cache_file confcache; then :; else
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
if test -w $cache_file; then
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
@@ -9485,16 +9928,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <mpi.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -9524,7 +9965,8 @@ _ACEOF
echo "${ECHO_T}yes" >&6
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
@@ -9535,16 +9977,14 @@ rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <mpi.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -9574,7 +10014,8 @@ _ACEOF
echo "${ECHO_T}yes" >&6
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
@@ -9675,7 +10116,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
@@ -9694,7 +10139,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
@@ -9706,13 +10152,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -9729,7 +10179,8 @@ if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
@@ -9742,14 +10193,32 @@ case $ac_header_compiler:$ac_header_preproc in
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9770,14 +10239,12 @@ _ACEOF
echo $ECHO_N "checking for GPFS support... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <gpfs.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
@@ -9809,7 +10276,8 @@ echo "${ECHO_T}yes" >&6
GPFS="yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
GPFS="no"
@@ -9933,7 +10401,7 @@ fi
saved_no_create=$no_create
no_create=yes
-ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
+ ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -9945,7 +10413,7 @@ cat >confcache <<\_ACEOF
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
@@ -9980,7 +10448,7 @@ _ACEOF
t end
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
: end' >>confcache
-if cmp -s $cache_file confcache; then :; else
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
if test -w $cache_file; then
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
@@ -10011,6 +10479,21 @@ fi
DEFS=-DHAVE_CONFIG_H
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
@@ -10025,11 +10508,12 @@ cat >$CONFIG_STATUS <<_ACEOF
# configure, is in config.log if it exists.
debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
-
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
@@ -10038,11 +10522,13 @@ cat >>$CONFIG_STATUS <<\_ACEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-# NLS nuisances.
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
@@ -10050,34 +10536,42 @@ else
as_unset=false
fi
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
- { $as_unset LANG || test "${LANG+set}" != set; } ||
- { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
- { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
- { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
- { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
- { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
- { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
- { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
- { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
@@ -10088,6 +10582,7 @@ echo X/"$0" |
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
+
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -10098,15 +10593,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conftest.sh
- echo "exit 0" >>conftest.sh
- chmod +x conftest.sh
- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
- rm -f conftest.sh
+ rm -f conf$$.sh
fi
@@ -10155,6 +10650,8 @@ do
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
CONFIG_SHELL=$as_dir/$as_base
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -10228,6 +10725,12 @@ else
fi
rm -f conf$$ conf$$.exe conf$$.file
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
@@ -10244,7 +10747,7 @@ as_nl='
IFS=" $as_nl"
# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
+$as_unset CDPATH
exec 6>&1
@@ -10260,8 +10763,8 @@ _ASBOX
} >&5
cat >&5 <<_CSEOF
-This file was extended by HDF5 Fortran $as_me 1.5.61, which was
-generated by GNU Autoconf 2.53. Invocation command line was
+This file was extended by HDF5 Fortran $as_me 1.5.62, which was
+generated by GNU Autoconf 2.57. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -10301,6 +10804,7 @@ Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number, then exit
+ -q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
@@ -10322,8 +10826,8 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-HDF5 Fortran config.status 1.5.61
-configured by $0, generated by GNU Autoconf 2.53,
+HDF5 Fortran config.status 1.5.62
+configured by $0, generated by GNU Autoconf 2.57,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
@@ -10344,25 +10848,25 @@ do
--*=*)
ac_option=`expr "x$1" : 'x\([^=]*\)='`
ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- shift
- set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
- shift
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
;;
- -*);;
*) # This is not an option, so the user has probably given explicit
# arguments.
+ ac_option=$1
ac_need_defaults=false;;
esac
- case $1 in
+ case $ac_option in
# Handling of the options.
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
- exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
--version | --vers* | -V )
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
@@ -10377,13 +10881,16 @@ Try \`$0 --help' for more information." >&2;}
--debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
- shift
- CONFIG_FILES="$CONFIG_FILES $1"
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
- shift
- CONFIG_HEADERS="$CONFIG_HEADERS $1"
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
# This is an error.
-*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
@@ -10398,6 +10905,20 @@ Try \`$0 --help' for more information." >&2;}
shift
done
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
@@ -10449,6 +10970,9 @@ if $ac_need_defaults; then
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
@@ -10457,17 +10981,17 @@ $debug ||
}
# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
+
{
- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=$TMPDIR/cs$$-$RANDOM
+ tmp=./confstat$$-$RANDOM
(umask 077 && mkdir $tmp)
} ||
{
- echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+ echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
@@ -10552,6 +11076,7 @@ s,@RANLIB@,$RANLIB,;t t
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
s,@STRIP@,$STRIP,;t t
s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@EGREP@,$EGREP,;t t
s,@LIBTOOL@,$LIBTOOL,;t t
s,@PERL@,$PERL,;t t
s,@AR@,$AR,;t t
@@ -10565,8 +11090,6 @@ s,@RUNPARALLEL@,$RUNPARALLEL,;t t
s,@TESTPARALLEL@,$TESTPARALLEL,;t t
s,@FILTERS@,$FILTERS,;t t
s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t
-/@DEPEND@/r $DEPEND
-s,@DEPEND@,,;t t
s,@H5_VERSION@,$H5_VERSION,;t t
s,@CONFIG_DATE@,$CONFIG_DATE,;t t
s,@CONFIG_USER@,$CONFIG_USER,;t t
@@ -10575,12 +11098,16 @@ s,@BYTESEX@,$BYTESEX,;t t
s,@CC_VERSION@,$CC_VERSION,;t t
s,@FC_VERSION@,$FC_VERSION,;t t
s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t
+s,@SEARCH@,$SEARCH,;t t
+s,@SETX@,$SETX,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+/@DEPEND@/r $DEPEND
+s,@DEPEND@,,;t t
/@COMMENCE@/r $COMMENCE
s,@COMMENCE@,,;t t
/@CONCLUDE@/r $CONCLUDE
s,@CONCLUDE@,,;t t
-s,@SEARCH@,$SEARCH,;t t
-s,@SETX@,$SETX,;t t
CEOF
_ACEOF
@@ -10651,25 +11178,30 @@ echo X"$ac_file" |
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" ||
- mkdir "$as_incr_dir" ||
- { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-done; }
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
ac_builddir=.
@@ -10699,7 +11231,7 @@ esac
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
@@ -10889,7 +11421,7 @@ _ACEOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
@@ -10913,7 +11445,7 @@ do
mv conftest.tail conftest.defines
done
rm -f conftest.defines
-echo ' fi # egrep' >>$CONFIG_STATUS
+echo ' fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
@@ -10953,7 +11485,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
- if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
@@ -10969,25 +11501,30 @@ echo X"$ac_file" |
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" ||
- mkdir "$as_incr_dir" ||
- { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-done; }
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
rm -f $ac_file
mv $tmp/config.h $ac_file
@@ -11046,7 +11583,7 @@ esac
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
@@ -11091,8 +11628,11 @@ ac_clean_files=$ac_clean_files_save
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
- $SHELL $CONFIG_STATUS || ac_cs_success=false
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
diff --git a/fortran/configure.in b/fortran/configure.in
index 4cf25df..4f3a815 100644
--- a/fortran/configure.in
+++ b/fortran/configure.in
@@ -24,7 +24,7 @@ dnl
dnl NOTE: Don't forget to change the version number here when we do a
dnl release!!!
dnl
-AC_INIT([HDF5 Fortran], [1.5.61], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5 Fortran], [1.5.62], [hdfhelp@ncsa.uiuc.edu])
AC_CONFIG_SRCDIR([src/HDF5.f90])
AC_CONFIG_HEADER([src/H5config_fortran.h])