diff options
Diffstat (limited to 'hl/Makefile.in')
| -rwxr-xr-x | hl/Makefile.in | 738 |
1 files changed, 651 insertions, 87 deletions
diff --git a/hl/Makefile.in b/hl/Makefile.in index d3fb619..a323a0c 100755 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -1,101 +1,665 @@ -## Top-level HDF5 Makefile(.in) -## -## Copyright (C) 2001 National Center for Supercomputing Applications. -## All rights reserved. -## -## -## This makefile mostly just reinvokes make in the various subdirectories -## but does so in the correct order. You can alternatively invoke make from -## each subdirectory manually. -## -top_srcdir=@top_srcdir@ -top_builddir=.. -srcdir=@srcdir@ -@COMMENCE@ - - -# Subdirectories in build-order -SUBDIRS=src test @HL_FOR@ - -############################################################################## -## T A R G E T S -## -## all: Build libraries, header files, tests, and programs in the -## various subdirectories but does not run tests or install the -## library, header files, or programs. The components can be -## built individually with the targets lib, progs, and tests. -## check: Test the uninstalled library to make sure it works. You may -## also say `test' or `_test' (`test' doesn't work from the top -## level directory for some versions of make because `test' is -## also a directory). -## install: Installs libraries, header files, programs, and documentation -## in the various directories under the prefix directory (lib, -## include, bin, man, info). Use the `--prefix=PATH' option -## to `configure' (or `config.status') or say `--help' for -## other alternatives. The default prefix is `/usr/local'. -## uninstall: Delete all the installed files that the `install' target -## created (but not the noninstalled files such as `make all' -## created). -## clean: Removes temporary files except those that record the -## configuration and those that are part of the distribution. -## mostlyclean: Like `clean' except it doesn't delete a few files like -## libraries, programs, and/or generated header files because -## regenerating them is rarely necessary and takes a lot of time. -## distclean: Deletes all files that are created by configuring or building -## HDF5. If you have unpacked the source and built HDF5 without -## creating any other files, then `make distclean' will leave -## only the files that were in the distrubution. -## maintainer-clean: -## Like `distclean' except it deletes more files. It deletes -## all generated files. This target is not intended for normal -## users; it deletes files that may require special tools to -## rebuild. -## TAGS: Updates the tags table for this program. -## dep depend: Builds dependencies in all subdirectories. These targets -## might not be available on certain combinations of make -## programs and C compilers. At the other extreme, the GNU -## make used in combination with gcc will maintain dependency -## information automatically. -lib progs check test _test uninstall: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ -tests TAGS dep depend: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -install: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@) || exit 1; \ - done +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright (C) 2001 National Center for Supercomputing Applications. +# All rights reserved. +# +# +# This makefile mostly just reinvokes make in the various subdirectories +# but does so in the correct order. You can alternatively invoke make from +# each subdirectory manually. +# +# HDF5 High-Level Makefile(.in) + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/conclude' file which was generated with config.status +# from `./config/conclude.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran -install-doc: - (cd doc && $(MAKE) $@) || exit 1; +SUBDIRS = src test $(FORTRAN_DIR) -uninstall-doc: - (cd doc && $(MAKE) $@) || exit 1; +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) -.PHONY: all lib progs test _test install uninstall dep depend clean \ - mostlyclean distclean maintainer-clean +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) -clean mostlyclean: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +subdir = hl +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = + +RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ + uninstall-info-recursive all-recursive install-data-recursive \ + install-exec-recursive installdirs-recursive install-recursive \ + uninstall-recursive check-recursive installcheck-recursive +DIST_COMMON = Makefile.am Makefile.in +DIST_SUBDIRS = src test fortran +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign hl/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -distclean: - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +ETAGS = etags +ETAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ done - -$(RM) Makefile + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-recursive +all-am: Makefile all-local +installdirs: installdirs-recursive +installdirs-am: + +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: -maintainer-clean: - @echo "This target is intended for maintainers to use;" +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." - @@SETX@; for d in $(SUBDIRS); do \ - (cd $$d && $(MAKE) $@); \ +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am all-local check \ + check-TESTS check-am clean clean-generic clean-libtool \ + clean-recursive distclean distclean-generic distclean-libtool \ + distclean-recursive distclean-tags distdir dvi dvi-am \ + dvi-recursive info info-am info-recursive install install-am \ + install-data install-data-am install-data-recursive \ + install-exec install-exec-am install-exec-recursive \ + install-info install-info-am install-info-recursive install-man \ + install-recursive install-strip installcheck installcheck-am \ + installdirs installdirs-am installdirs-recursive \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ + uninstall uninstall-am uninstall-info-am \ + uninstall-info-recursive uninstall-recursive + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) + +lib progs tests :: + @$(MAKE) build-$@ || exit 1; \ + for d in X $(SUBDIRS); do \ + if test $$d != X -a $$d != .; then \ + (set -x; cd $$d && $(MAKE) $@) || exit 1; \ + fi; \ done +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @for test in $(TEST_PROG) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNTEST) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @for test in $(TEST_SCRIPT) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + /bin/sh $$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + HDF5_DRIVER=$$vfd $(MAKE) check; \ + fi; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |