diff options
Diffstat (limited to 'hl/Makefile.in')
| -rw-r--r-- | hl/Makefile.in | 539 |
1 files changed, 451 insertions, 88 deletions
diff --git a/hl/Makefile.in b/hl/Makefile.in index 8b00085..204c93b 100644 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.12.3 from Makefile.am. +# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2012 Free Software Foundation, Inc. +# Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -35,23 +35,51 @@ # # HDF5 High-Level Makefile(.in) VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -70,10 +98,10 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/bin/mkinstalldirs \ - $(top_srcdir)/config/commence.am \ - $(top_srcdir)/config/conclude.am COPYING +DIST_COMMON = $(top_srcdir)/config/commence.am \ + $(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \ + $(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \ + $(top_srcdir)/bin/test-driver COPYING TESTS = subdir = hl ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -98,13 +126,14 @@ am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -112,15 +141,230 @@ am__can_run_installinfo = \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + check recheck distdir +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no -am__tty_colors = $(am__tty_colors_dummy) +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red='[0;31m'; \ + grn='[0;32m'; \ + lgn='[1;32m'; \ + blu='[1;34m'; \ + mgn='[0;35m'; \ + brg='[1m'; \ + std='[m'; \ + fi; \ +} +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +TEST_SUITE_LOG = test-suite.log +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.sh.log=.log) +SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver +SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -452,6 +696,7 @@ TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-recursive .SUFFIXES: +.SUFFIXES: .log .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -496,14 +741,13 @@ clean-libtool: # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. -$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ @@ -524,31 +768,13 @@ $(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done -cscopelist-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ - done -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -564,12 +790,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -581,15 +802,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -598,9 +815,10 @@ GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive -cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP)'; \ +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ @@ -616,6 +834,151 @@ cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +.sh.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.sh$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -697,6 +1060,9 @@ install-strip: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: @@ -774,14 +1140,11 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \ - cscopelist-recursive ctags-recursive install-am install-strip \ - tags-recursive +.MAKE: $(am__recursive_targets) check-am install-am install-strip -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am all-local check check-TESTS check-am clean \ - clean-generic clean-libtool cscopelist cscopelist-recursive \ - ctags ctags-recursive distclean distclean-generic \ +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ + check check-TESTS check-am clean clean-generic clean-libtool \ + cscopelist-am ctags ctags-am distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ @@ -791,7 +1154,7 @@ uninstall-am: installcheck-am installcheck-local installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ - pdf-am ps ps-am tags tags-recursive uninstall uninstall-am + pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. |