summaryrefslogtreecommitdiffstats
path: root/hl/c++/examples
diff options
context:
space:
mode:
Diffstat (limited to 'hl/c++/examples')
-rw-r--r--hl/c++/examples/CMakeLists.txt59
-rw-r--r--hl/c++/examples/CMakeTests.cmake55
-rw-r--r--hl/c++/examples/Makefile.am20
-rw-r--r--hl/c++/examples/Makefile.in868
-rw-r--r--hl/c++/examples/ptExampleFL.cpp71
-rw-r--r--hl/c++/examples/ptExampleVL.cpp112
-rw-r--r--hl/c++/examples/run-hlc++-ex.sh.in44
7 files changed, 163 insertions, 1066 deletions
diff --git a/hl/c++/examples/CMakeLists.txt b/hl/c++/examples/CMakeLists.txt
index 3034a78..dfc5818 100644
--- a/hl/c++/examples/CMakeLists.txt
+++ b/hl/c++/examples/CMakeLists.txt
@@ -1,36 +1,35 @@
-cmake_minimum_required (VERSION 2.8.6)
-PROJECT (HDF5_HL_CPP_EXAMPLES)
-
-#-----------------------------------------------------------------------------
-# Setup include Directories
-#-----------------------------------------------------------------------------
-INCLUDE_DIRECTORIES (${HDF5_HL_SRC_DIR}/src)
-INCLUDE_DIRECTORIES (${HDF5_HL_CPP_SRC_DIR}/src)
+cmake_minimum_required (VERSION 3.18)
+project (HDF5_HL_CPP_EXAMPLES CXX)
# --------------------------------------------------------------------
# Add in the examples for the Packet Table codes
# --------------------------------------------------------------------
-ADD_EXECUTABLE (ptExampleFL ${HDF5_HL_CPP_EXAMPLES_SOURCE_DIR}/ptExampleFL.cpp)
-TARGET_NAMING (ptExampleFL ${LIB_TYPE})
-TARGET_LINK_LIBRARIES (
- ptExampleFL
- ${HDF5_HL_CPP_LIB_TARGET}
- ${HDF5_HL_LIB_TARGET}
- ${HDF5_LIB_TARGET}
-)
-SET_TARGET_PROPERTIES (ptExampleFL PROPERTIES FOLDER examples/hl/cpp)
+add_executable (ptExampleFL ${HDF5_HL_CPP_EXAMPLES_SOURCE_DIR}/ptExampleFL.cpp)
+target_include_directories (ptExampleFL PRIVATE "${HDF5_SRC_INCLUDE_DIRS};${HDF5_SRC_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>")
+if (NOT BUILD_SHARED_LIBS)
+ TARGET_C_PROPERTIES (ptExampleFL STATIC)
+ target_link_libraries (ptExampleFL PRIVATE
+ ${HDF5_HL_CPP_LIB_TARGET}
+ ${HDF5_HL_LIB_TARGET}
+ ${HDF5_LIB_TARGET}
+ )
+else ()
+ TARGET_C_PROPERTIES (ptExampleFL SHARED)
+ target_link_libraries (ptExampleFL PRIVATE
+ ${HDF5_HL_CPP_LIBSH_TARGET}
+ ${HDF5_HL_LIBSH_TARGET}
+ ${HDF5_LIBSH_TARGET}
+ )
+endif ()
+set_target_properties (ptExampleFL PROPERTIES FOLDER examples/hl/cpp)
-ADD_EXECUTABLE (ptExampleVL ${HDF5_HL_CPP_EXAMPLES_SOURCE_DIR}/ptExampleVL.cpp)
-TARGET_NAMING (ptExampleVL ${LIB_TYPE})
-TARGET_LINK_LIBRARIES (
- ptExampleVL
- ${HDF5_HL_CPP_LIB_TARGET}
- ${HDF5_HL_LIB_TARGET}
- ${HDF5_LIB_TARGET}
-)
-SET_TARGET_PROPERTIES (ptExampleVL PROPERTIES FOLDER examples/hl/cpp)
+#-----------------------------------------------------------------------------
+# Add Target to clang-format
+#-----------------------------------------------------------------------------
+if (HDF5_ENABLE_FORMATTERS)
+ clang_format (HDF5_HL_CPP_EXAMPLES_FORMAT ptExampleFL)
+endif ()
-IF (BUILD_TESTING)
- ADD_TEST (NAME cpp_hl_ex_ptExampleFL COMMAND $<TARGET_FILE:ptExampleFL>)
- ADD_TEST (NAME cpp_hl_ex_ptExampleVL COMMAND $<TARGET_FILE:ptExampleVL>)
-ENDIF (BUILD_TESTING)
+if (BUILD_TESTING AND HDF5_TEST_CPP AND HDF5_TEST_EXAMPLES AND HDF5_TEST_SERIAL)
+ include (CMakeTests.cmake)
+endif ()
diff --git a/hl/c++/examples/CMakeTests.cmake b/hl/c++/examples/CMakeTests.cmake
new file mode 100644
index 0000000..8b2b4ce
--- /dev/null
+++ b/hl/c++/examples/CMakeTests.cmake
@@ -0,0 +1,55 @@
+#
+# Copyright by The HDF Group.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://www.hdfgroup.org/licenses.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
+
+##############################################################################
+##############################################################################
+### T E S T I N G ###
+##############################################################################
+##############################################################################
+# Remove any output file left over from previous test run
+set (HL_CPP_EX_PT_CLEANFILES
+ PTcppexampleFL.h5
+)
+add_test (
+ NAME HL_CPP_ex_ptExampleFL-clear-objects
+ COMMAND ${CMAKE_COMMAND}
+ -E remove ${HL_CPP_EX_PT_CLEANFILES}
+)
+set_tests_properties (HL_CPP_ex_ptExampleFL-clear-objects PROPERTIES
+ WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+)
+
+if (HDF5_ENABLE_USING_MEMCHECKER)
+ add_test (NAME HL_CPP_ex_ptExampleFL COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:ptExampleFL>)
+else ()
+ add_test (NAME HL_CPP_ex_ptExampleFL COMMAND "${CMAKE_COMMAND}"
+ -D "TEST_EMULATOR=${CMAKE_CROSSCOMPILING_EMULATOR}"
+ -D "TEST_PROGRAM=$<TARGET_FILE:ptExampleFL>"
+ -D "TEST_ARGS:STRING="
+ -D "TEST_EXPECT=0"
+ -D "TEST_SKIP_COMPARE=TRUE"
+ -D "TEST_OUTPUT=ptExampleFL.txt"
+ #-D "TEST_REFERENCE=ptExampleFL.out"
+ -D "TEST_FOLDER=${PROJECT_BINARY_DIR}"
+ -P "${HDF_RESOURCES_DIR}/runTest.cmake"
+ )
+endif ()
+set_tests_properties (HL_CPP_ex_ptExampleFL PROPERTIES DEPENDS HL_CPP_ex_ptExampleFL-clear-objects)
+add_test (
+ NAME HL_CPP_ex_ptExampleFL-clean-objects
+ COMMAND ${CMAKE_COMMAND}
+ -E remove ${HL_CPP_EX_PT_CLEANFILES}
+)
+set_tests_properties (HL_CPP_ex_ptExampleFL-clean-objects PROPERTIES
+ DEPENDS HL_CPP_ex_ptExampleFL
+ WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+)
diff --git a/hl/c++/examples/Makefile.am b/hl/c++/examples/Makefile.am
index c690a12..a069065 100644
--- a/hl/c++/examples/Makefile.am
+++ b/hl/c++/examples/Makefile.am
@@ -1,16 +1,13 @@
#
# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://www.hdfgroup.org/licenses.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
##
## Makefile.am
## Run automake to generate a Makefile.in from this file.
@@ -23,10 +20,11 @@ include $(top_srcdir)/config/commence.am
# These are the programs that 'make all' or 'make prog' will build and
# which 'make check' will run. List them in the order they should be run.
-TEST_PROG=ptExampleFL ptExampleVL
+EXAMPLE_PROG=ptExampleFL
+TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES)
# These are the example files to be installed
-INSTALL_FILES=ptExampleFL.cpp ptExampleVL.cpp
+INSTALL_FILES=ptExampleFL.cpp
INSTALL_SCRIPT_FILES = run-hlc++-ex.sh
# Tell conclude.am that these are C++ tests.
@@ -34,7 +32,8 @@ CXX_API=yes
# Where to install examples
# Note: no '/' after DESTDIR. Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++
+EXAMPLEDIR=${DESTDIR}$(examplesdir)/hl/c++
+EXAMPLETOPDIR=${DESTDIR}$(examplesdir)/hl
# How to build programs using h5c++
$(EXTRA_PROG): $(H5CPP)
@@ -45,7 +44,6 @@ $(EXTRA_PROG): $(H5CPP)
# will try to build them with the normal C++ compiler, not h5c++. This is
# an inelegant way of solving the problem, unfortunately.
ptExampleFL: ptExampleFL.cpp
-ptExampleVL: ptExampleVL.cpp
include $(top_srcdir)/config/examples.am
include $(top_srcdir)/config/conclude.am
diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in
deleted file mode 100644
index acb7c11..0000000
--- a/hl/c++/examples/Makefile.in
+++ /dev/null
@@ -1,868 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/run-hlc++-ex.sh.in $(top_srcdir)/config/commence.am \
- $(top_srcdir)/config/conclude.am \
- $(top_srcdir)/config/examples.am
-TESTS =
-subdir = hl/c++/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h
-CONFIG_CLEAN_FILES = run-hlc++-ex.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-DYNAMIC_DIRS = @DYNAMIC_DIRS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FC2003 = @FC2003@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FILTERS = @FILTERS@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-GPFS = @GPFS@
-GREP = @GREP@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_CXX_SHARED = @H5_CXX_SHARED@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_LONE_COLON = @H5_LONE_COLON@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HDF_FORTRAN2003 = @HDF_FORTRAN2003@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LARGEFILE = @LARGEFILE@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-MPI_GET_SIZE = @MPI_GET_SIZE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PTHREAD = @PTHREAD@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SETX = @SETX@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
-USE_FILTER_NBIT = @USE_FILTER_NBIT@
-USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
-USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command. Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
-# has been removed. According to the official description of DESTDIR by Gnu at
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
-# prepended to the normal and complete install path that it precedes for the
-# purpose of installing in a temporary directory which is useful for building
-# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
-# '/' at the beginning of the normal install path. When DESTDIR is empty the
-# path then begins with '//', which is incorrect and causes problems at least for
-# Cygwin.
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
-
-# These are the programs that 'make all' or 'make prog' will build and
-# which 'make check' will run. List them in the order they should be run.
-TEST_PROG = ptExampleFL ptExampleVL
-
-# These are the example files to be installed
-INSTALL_FILES = ptExampleFL.cpp ptExampleVL.cpp
-INSTALL_SCRIPT_FILES = run-hlc++-ex.sh
-
-# Tell conclude.am that these are C++ tests.
-CXX_API = yes
-
-# Where to install examples
-# Note: no '/' after DESTDIR. Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG)
-EXTRA_PROG = $(EXAMPLE_PROG)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(TEST_PROG) $(TEST_PROG_PARA)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times.
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
- $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
- $(EXTRA_PROG)
-
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/examples/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign hl/c++/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-hlc++-ex.sh: $(top_builddir)/config.status $(srcdir)/run-hlc++-ex.sh.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
- mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
- clean-generic clean-libtool distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-data-local install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installcheck-local installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
- build-tests check-clean check-install check-p check-s check-vfd \
- install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
- @$(top_srcdir)/bin/makehelp
-
-# How to build programs using h5c++
-$(EXTRA_PROG): $(H5CPP)
- $(H5CPP) $(H5CCFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/$@.cpp
-
-# List dependencies for each program. Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C++ compiler, not h5c++. This is
-# an inelegant way of solving the problem, unfortunately.
-ptExampleFL: ptExampleFL.cpp
-ptExampleVL: ptExampleVL.cpp
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
- -$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
- -$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules. We install the source files, not the
-# example programs themselves.
-install-data-local:
- @$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
- @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
- @for f in X $(INSTALL_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \
- chmod a-x $(EXAMPLEDIR)/$$f; \
- fi; \
- done
- @for f in X $(INSTALL_SCRIPT_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
- fi; \
- done
- @for f in X $(INSTALL_TOP_SCRIPT_FILES); do \
- if test $$f != X; then \
- (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
- fi; \
- done
-
-uninstall-examples:
- @if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \
- set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES); \
- fi
- @if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then \
- set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES); \
- fi
- @if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then \
- set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES); \
- fi
-
-installcheck-local:
- @if test "$(STATIC_SHARED)" = "static, shared"; then \
- H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
- $(MAKE) $(AM_MAKEFLAGS) clean; \
- H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check; \
- elif test "$(STATIC_SHARED)" = "shared"; then \
- H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) check; \
- fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
- @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
- @for d in X $(SUBDIRS); do \
- if test $$d != X && test $$d != .; then \
- (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
- fi; \
- done
-
-# General rule for recursive cleaning targets. Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
- @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
- @for d in X $(SUBDIRS); do \
- if test $$d != X && test $$d != .; then \
- (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
- fi; \
- done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
- @echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
- $(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
- @$(MAKE) build-check-s
- @$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
- @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
- echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
- fi
- @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
- @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
- echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
- fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
- @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
- tname=$(@:.chkexe_=)$(EXEEXT);\
- log=$(@:.chkexe_=.chklog); \
- echo "============================"; \
- if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
- echo "No need to test $${tname} again."; \
- else \
- echo "============================" > $${log}; \
- if test "X$(FORTRAN_API)" = "Xyes"; then \
- echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- elif test "X$(CXX_API)" = "Xyes"; then \
- echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
- else \
- echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
- echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- fi; \
- echo "============================" >> $${log}; \
- srcdir="$(srcdir)" \
- $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
- && touch $(@:.chkexe_=.chkexe) || \
- (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- (cat $${log} && false) || exit 1; \
- echo "" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
- echo "============================" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)"; \
- cat $${log}; \
- fi; \
- fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
- @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
- cmd=$(@:.chkexe_=);\
- tname=`basename $$cmd`;\
- chkname=`basename $(@:.chkexe_=.chkexe)`;\
- log=`basename $(@:.chkexe_=.chklog)`; \
- echo "============================"; \
- if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
- echo "No need to test $${tname} again."; \
- else \
- echo "============================" > $${log}; \
- if test "X$(FORTRAN_API)" = "Xyes"; then \
- echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
- echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- elif test "X$(CXX_API)" = "Xyes"; then \
- echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
- echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- else \
- echo "Testing $${tname} $(TEST_FLAGS)"; \
- echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
- fi; \
- echo "============================" >> $${log}; \
- RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
- srcdir="$(srcdir)" \
- $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
- && touch $${chkname} || \
- (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- (cat $${log} && false) || exit 1; \
- echo "" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
- echo "============================" >> $${log}; \
- echo "Finished testing $${tname} $(TEST_FLAGS)"; \
- cat $${log}; \
- fi; \
- echo "============================"; \
- fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
- @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
- echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
- fi
- @if test -n "$(TEST_PROG_PARA)"; then \
- echo "**** Hint ****"; \
- echo "Parallel test files reside in the current directory" \
- "by default."; \
- echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
- echo " HDF5_PARAPREFIX=/PFS/user/me"; \
- echo " export HDF5_PARAPREFIX"; \
- echo " make check"; \
- echo "**** end of Hint ****"; \
- fi
- @for test in $(TEST_PROG_PARA) dummy; do \
- if test $$test != dummy; then \
- $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
- RUNEXEC="$(RUNPARALLEL)" || exit 1; \
- fi; \
- done
- @for test in $(TEST_SCRIPT_PARA) dummy; do \
- if test $$test != dummy; then \
- $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
- fi; \
- done
- @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
- echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
- fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
- @for vfd in $(VFD_LIST) dummy; do \
- if test $$vfd != dummy; then \
- echo "============================"; \
- echo "Testing Virtual File Driver $$vfd"; \
- echo "============================"; \
- $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
- HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
- fi; \
- done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/c++/examples/ptExampleFL.cpp b/hl/c++/examples/ptExampleFL.cpp
index 3ce2217..0e280f0 100644
--- a/hl/c++/examples/ptExampleFL.cpp
+++ b/hl/c++/examples/ptExampleFL.cpp
@@ -1,16 +1,13 @@
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by The HDF Group. *
- * Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
- * the files COPYING and Copyright.html. COPYING can be found at the root *
- * of the source code distribution tree; Copyright.html can be found at the *
- * root level of an installed copy of the electronic HDF5 document set and *
- * is linked from the top-level documents page. It can also be found at *
- * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
- * access to either file, you may request a copy from help@hdfgroup.org. *
+ * the COPYING file, which can be found at the root of the source code *
+ * distribution tree, or in https://www.hdfgroup.org/licenses. *
+ * If you do not have access to either file, you may request a copy from *
+ * help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
#include "H5PacketTable.h"
@@ -24,57 +21,66 @@
*-------------------------------------------------------------------------
*/
-int main(void)
+const char *FILE_NAME("PTcppexampleFL.h5");
+const char *PT_NAME("/examplePacketTable");
+
+int
+main(void)
{
- herr_t err; /* Return value from function calls */
- hid_t fileID; /* HDF5 identifier for file */
- hsize_t count; /* Number of records in table */
- int x; /* Temporary counter variable */
+ herr_t err; /* Return value from function calls */
+ hid_t fileID; /* HDF5 identifier for file */
+ hid_t plistID; /* HDF5 identifier for property list to use compression */
+ hsize_t count; /* Number of records in table */
+ int x; /* Temporary counter variable */
/* Buffers to hold data */
int readBuffer[5];
int writeBuffer[5];
/* Initialize buffers */
- for(x=0; x<5; x++)
- {
- writeBuffer[x]=x;
- readBuffer[x] = -1;
+ for (x = 0; x < 5; x++) {
+ writeBuffer[x] = x;
+ readBuffer[x] = -1;
}
/* Create a new HDF5 file */
- fileID = H5Fcreate("PTcppexampleFL.h5", H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
- if(fileID <0)
+ fileID = H5Fcreate(FILE_NAME, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
+ if (fileID < 0)
fprintf(stderr, "Couldn't create file.\n");
- /* Create a fixed-length packet table with compression level 5. */
- FL_PacketTable ptable(fileID, "/examplePacketTable", H5T_NATIVE_INT, 100, 5);
- if(! ptable.IsValid())
+ /* Prepare property list to set compression, randomly use deflate
+ with compression level 5. */
+ plistID = H5Pcreate(H5P_DATASET_CREATE);
+ err = H5Pset_deflate(plistID, 5);
+ if (err < 0)
+ fprintf(stderr, "Error setting compression level.");
+
+ /* Create a fixed-length packet table. */
+ FL_PacketTable ptable(fileID, plistID, PT_NAME, H5T_NATIVE_INT, 100);
+ if (!ptable.IsValid())
fprintf(stderr, "Unable to create packet table.");
/* Append five packets to the packet table, one at a time */
- for(x=0; x<5; x++)
- {
- err = ptable.AppendPacket( &(writeBuffer[x]) );
- if(err<0)
+ for (x = 0; x < 5; x++) {
+ err = ptable.AppendPacket(&(writeBuffer[x]));
+ if (err < 0)
fprintf(stderr, "Error adding record.");
}
/* Get the number of packets in the packet table. This should be five. */
count = ptable.GetPacketCount(err);
- if(err < 0)
+ if (err < 0)
fprintf(stderr, "Error getting packet count.");
- printf("Number of packets in packet table after five appends: %d\n", count);
+ printf("Number of packets in packet table after five appends: %llu\n", count);
/* Initialize packet table's "current record" */
ptable.ResetIndex();
/* Iterate through packets, read each one back */
- for(x=0; x<5; x++)
- {
- err = ptable.GetNextPacket( &(readBuffer[x]) );
- if(err < 0)
+ for (x = 0; x < 5; x++) {
+ err = ptable.GetNextPacket(&(readBuffer[x]));
+ if (err < 0)
fprintf(stderr, "Error reading record.");
printf("Packet %d's value is %d.\n", x, readBuffer[x]);
@@ -84,9 +90,8 @@ int main(void)
/* out of scope. */
err = H5Fclose(fileID);
- if( err < 0 )
+ if (err < 0)
fprintf(stderr, "Failed to close file.\n");
return 0;
}
-
diff --git a/hl/c++/examples/ptExampleVL.cpp b/hl/c++/examples/ptExampleVL.cpp
deleted file mode 100644
index c3feccd..0000000
--- a/hl/c++/examples/ptExampleVL.cpp
+++ /dev/null
@@ -1,112 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group. *
- * Copyright by the Board of Trustees of the University of Illinois. *
- * All rights reserved. *
- * *
- * This file is part of HDF5. The full HDF5 copyright notice, including *
- * terms governing use, modification, and redistribution, is contained in *
- * the files COPYING and Copyright.html. COPYING can be found at the root *
- * of the source code distribution tree; Copyright.html can be found at the *
- * root level of an installed copy of the electronic HDF5 document set and *
- * is linked from the top-level documents page. It can also be found at *
- * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
- * access to either file, you may request a copy from help@hdfgroup.org. *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-#include "H5PacketTable.h"
-
-/*-------------------------------------------------------------------------
- * Packet Table Variable-Length Example
- *
- * Example program that creates a packet table and performs
- * writes and reads.
- *
- *-------------------------------------------------------------------------
- */
-
-int main(void)
-{
-#ifdef VLPT_REMOVED
- herr_t err; /* Return value from function calls */
- hid_t fileID; /* HDF5 identifier for file */
- hsize_t count; /* Number of records in table */
- int x; /* Loop variable */
-
- /* This example has two different sizes of "record": longs and shorts */
- long longBuffer[5];
- short shortBuffer[5];
-
- /* Buffer of hvl_t structs to read back records */
- hvl_t readBuffer[5];
-
- /* Initialize buffers */
- for(x=0; x<5; x++)
- {
- longBuffer[x] = -x;
- shortBuffer[x] = x;
- }
-
- /* Create a new HDF5 file */
- fileID = H5Fcreate("PTcppexampleVL.h5", H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
- if(fileID <0)
- fprintf(stderr, "Couldn't create file.\n");
-
- /* Create a variable-length packet table. */
- VL_PacketTable ptable(fileID, "/examplePacketTable", 1);
-
- if(! ptable.IsValid())
- fprintf(stderr, "Unable to create packet table.");
-
- /* Append five packets to the packet table. */
- /* In C++, there is no need to package data into hvl_t structs. */
- err = ptable.AppendPacket( &(longBuffer[0]), sizeof(long));
- if(err < 0)
- fprintf(stderr, "Error adding record.");
- err = ptable.AppendPacket( &(shortBuffer[1]), sizeof(short));
- if(err < 0)
- fprintf(stderr, "Error adding record.");
- err = ptable.AppendPacket( &(longBuffer[2]), sizeof(long));
- if(err < 0)
- fprintf(stderr, "Error adding record.");
- err = ptable.AppendPacket( &(longBuffer[3]), sizeof(long));
- if(err < 0)
- fprintf(stderr, "Error adding record.");
- err = ptable.AppendPacket( &(shortBuffer[4]), sizeof(short));
- if(err < 0)
- fprintf(stderr, "Error adding record.");
-
- /* Get the number of packets in the packet table. This should be five. */
- count = ptable.GetPacketCount(err);
- if(err < 0)
- fprintf(stderr, "Error getting packet count.");
-
- printf("Number of packets in packet table after five appends: %d\n", count);
-
- /* Initialize packet table's "current record" */
- ptable.ResetIndex();
-
- /* Iterate through packets, read each one back */
- for(x=0; x<5; x++)
- {
- err = ptable.GetNextPacket( &(readBuffer[x]) );
- if(err < 0)
- fprintf(stderr, "Error reading record.");
-
- printf("Packet %d's length is %d.\n", x, readBuffer[x].len);
- if(readBuffer[x].len == sizeof(long))
- printf("Packet %d's value is %d.\n", x, *((long *) readBuffer[x].p) );
- else
- printf("Packet %d's value is %d.\n", x, *((short *) readBuffer[x].p) );
- }
-
- /* The packet table will close automatically when its object goes */
- /* out of scope. */
-
- err = H5Fclose(fileID);
- if( err < 0 )
- fprintf(stderr, "Failed to close file.\n");
-
-#endif /* VLPT_REMOVED */
- return 0;
-}
-
diff --git a/hl/c++/examples/run-hlc++-ex.sh.in b/hl/c++/examples/run-hlc++-ex.sh.in
index 7742f99..47f460b 100644
--- a/hl/c++/examples/run-hlc++-ex.sh.in
+++ b/hl/c++/examples/run-hlc++-ex.sh.in
@@ -5,12 +5,10 @@
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://www.hdfgroup.org/licenses.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
#
# This file: run-hlc++-ex.sh
@@ -20,7 +18,7 @@
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# This script will compile and run the c++ examples from source files #
-# installed in .../share/hdf5_examples/hl/c++ using h5c++. The #
+# installed in @examplesdir@/hl/c++ using h5c++. The #
# order for running programs with RunTest in the MAIN section below is taken #
# from the Makefile. The order is important since some of the test programs #
# use data files created by earlier test programs. Any future additions should #
@@ -31,9 +29,33 @@
# Initializations
EXIT_SUCCESS=0
EXIT_FAILURE=1
+
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure. If successful, set `prefix_relto_examplesdir` to the
+# relative path. Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below. The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+ echo $(echo ${examplesdir##${prefix}/} | \
+ sed 's,[^/][^/]*,..,g')
+else
+ echo $prefix
+fi
+)
+
# Where the tool is installed.
# default is relative path to installed location of the tools
-prefix="${prefix:-../../../../}"
+prefix="${prefix:-../../${prefix_relto_examplesdir}}"
AR="@AR@"
RANLIB="@RANLIB@"
H5TOOL="h5c++" # The tool name
@@ -64,9 +86,7 @@ RunTest()
if [ $? -eq 0 ]
then
if (RunTest ptExampleFL &&\
- rm ptExampleFL &&\
- RunTest ptExampleVL &&\
- rm ptExampleVL); then
+ rm ptExampleFL); then
EXIT_VALUE=${EXIT_SUCCESS}
else
EXIT_VALUE=${EXIT_FAILURE}
@@ -78,5 +98,5 @@ rm *.o
rm *.h5
echo
-exit $EXIT_VALUE
+exit $EXIT_VALUE
generated by cgit v0.12 at 2025-12-10 04:35:20 (GMT)