diff options
Diffstat (limited to 'hl/c++/src')
-rw-r--r-- | hl/c++/src/CMakeLists.txt | 8 | ||||
-rw-r--r-- | hl/c++/src/Makefile.in | 94 |
2 files changed, 60 insertions, 42 deletions
diff --git a/hl/c++/src/CMakeLists.txt b/hl/c++/src/CMakeLists.txt index 9964160..fbabc86 100644 --- a/hl/c++/src/CMakeLists.txt +++ b/hl/c++/src/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required (VERSION 3.10) +cmake_minimum_required (VERSION 3.12) project (HDF5_HL_CPP_SRC CXX) #----------------------------------------------------------------------------- @@ -14,6 +14,7 @@ if (NOT ONLY_SHARED_LIBS) PRIVATE "${HDF5_SRC_DIR};${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>" INTERFACE "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" ) + target_compile_options(${HDF5_HL_CPP_LIB_TARGET} PRIVATE "${HDF5_CMAKE_CXX_FLAGS}") TARGET_C_PROPERTIES (${HDF5_HL_CPP_LIB_TARGET} STATIC) target_link_libraries (${HDF5_HL_CPP_LIB_TARGET} PUBLIC ${HDF5_HL_LIB_TARGET} ${HDF5_LIB_TARGET}) set_global_variable (HDF5_LIBRARIES_TO_EXPORT "${HDF5_LIBRARIES_TO_EXPORT};${HDF5_HL_CPP_LIB_TARGET}") @@ -28,9 +29,8 @@ if (BUILD_SHARED_LIBS) PRIVATE "${HDF5_SRC_DIR};${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>" INTERFACE "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" ) - target_compile_definitions(${HDF5_HL_CPP_LIBSH_TARGET} - PUBLIC "H5_BUILT_AS_DYNAMIC_LIB" - ) + target_compile_options(${HDF5_HL_CPP_LIBSH_TARGET} PRIVATE "${HDF5_CMAKE_CXX_FLAGS}") + target_compile_definitions(${HDF5_HL_CPP_LIBSH_TARGET} PUBLIC "H5_BUILT_AS_DYNAMIC_LIB") TARGET_C_PROPERTIES (${HDF5_HL_CPP_LIBSH_TARGET} SHARED) target_link_libraries (${HDF5_HL_CPP_LIBSH_TARGET} PUBLIC ${HDF5_HL_LIBSH_TARGET} ${HDF5_LIBSH_TARGET}) set_global_variable (HDF5_LIBRARIES_TO_EXPORT "${HDF5_LIBRARIES_TO_EXPORT};${HDF5_HL_CPP_LIBSH_TARGET}") diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in index 132f7a7..e8cbabf 100644 --- a/hl/c++/src/Makefile.in +++ b/hl/c++/src/Makefile.in @@ -419,15 +419,15 @@ AMTAR = @AMTAR@ # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. -# AM_CFLAGS is an automake construct which should be used by Makefiles +# AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. -AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ +AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ @H5_ECFLAGS@ # Include src directory AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \ -I$(top_srcdir)/hl/src -AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ @H5_ECXXFLAGS@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ AM_JAVACFLAGS = @AM_JAVACFLAGS@ @@ -447,6 +447,7 @@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ +CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@ CODESTACK = @CODESTACK@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ @@ -463,6 +464,7 @@ DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ +DESIRED_FILE_LOCKING = @DESIRED_FILE_LOCKING@ DEV_WARNINGS = @DEV_WARNINGS@ DIRECT_VFD = @DIRECT_VFD@ DLLTOOL = @DLLTOOL@ @@ -499,8 +501,11 @@ H5_CFLAGS = @H5_CFLAGS@ H5_CLASSPATH = @H5_CLASSPATH@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_ECFLAGS = @H5_ECFLAGS@ +H5_ECXXFLAGS = @H5_ECXXFLAGS@ H5_FCFLAGS = @H5_FCFLAGS@ H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ +H5_IS_DARWIN = @H5_IS_DARWIN@ H5_JAVACFLAGS = @H5_JAVACFLAGS@ H5_JAVAFLAGS = @H5_JAVAFLAGS@ H5_JNIFLAGS = @H5_JNIFLAGS@ @@ -523,6 +528,7 @@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ +IGNORE_DISABLED_FILE_LOCKS = @IGNORE_DISABLED_FILE_LOCKS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -559,6 +565,7 @@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MEMORYALLOCSANITYCHECK = @MEMORYALLOCSANITYCHECK@ +MIRROR_VFD = @MIRROR_VFD@ MKDIR_P = @MKDIR_P@ MPE = @MPE@ NM = @NM@ @@ -618,6 +625,7 @@ TIME = @TIME@ TR = @TR@ TRACE_API = @TRACE_API@ UNAME_INFO = @UNAME_INFO@ +USE_FILE_LOCKING = @USE_FILE_LOCKING@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ USINGMEMCHECKER = @USINGMEMCHECKER@ @@ -653,6 +661,7 @@ docdir = $(exec_prefix)/doc dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ +examplesdir = @examplesdir@ exec_prefix = @exec_prefix@ fortran_linux_linker_option = @fortran_linux_linker_option@ host = @host@ @@ -709,15 +718,15 @@ LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la -# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below -# has been removed. According to the official description of DESTDIR by Gnu at -# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is -# prepended to the normal and complete install path that it precedes for the -# purpose of installing in a temporary directory which is useful for building -# rpms and other packages. The '/' after ${DESTDIR} will be followed by another -# '/' at the beginning of the normal install path. When DESTDIR is empty the -# path then begins with '//', which is incorrect and causes problems at least for -# Cygwin. +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by Gnu at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with @@ -737,30 +746,30 @@ TRACE = perl $(top_srcdir)/bin/trace # .chklog files are output from those tests. # *.clog and *.clog2 are from the MPE option. CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 -LT_VERS_INTERFACE = 105 +LT_VERS_INTERFACE = 106 LT_VERS_REVISION = 0 -LT_VERS_AGE = 2 -LT_CXX_VERS_INTERFACE = 105 +LT_VERS_AGE = 3 +LT_CXX_VERS_INTERFACE = 106 LT_CXX_VERS_REVISION = 0 -LT_CXX_VERS_AGE = 2 -LT_F_VERS_INTERFACE = 102 -LT_F_VERS_REVISION = 1 -LT_F_VERS_AGE = 0 +LT_CXX_VERS_AGE = 3 +LT_F_VERS_INTERFACE = 103 +LT_F_VERS_REVISION = 0 +LT_F_VERS_AGE = 1 LT_HL_VERS_INTERFACE = 101 -LT_HL_VERS_REVISION = 3 +LT_HL_VERS_REVISION = 4 LT_HL_VERS_AGE = 1 LT_HL_CXX_VERS_INTERFACE = 101 -LT_HL_CXX_VERS_REVISION = 4 +LT_HL_CXX_VERS_REVISION = 5 LT_HL_CXX_VERS_AGE = 1 LT_HL_F_VERS_INTERFACE = 100 -LT_HL_F_VERS_REVISION = 5 +LT_HL_F_VERS_REVISION = 6 LT_HL_F_VERS_AGE = 0 -LT_JAVA_VERS_INTERFACE = 104 -LT_JAVA_VERS_REVISION = 1 -LT_JAVA_VERS_AGE = 4 -LT_TOOLS_VERS_INTERFACE = 101 -LT_TOOLS_VERS_REVISION = 3 -LT_TOOLS_VERS_AGE = 1 +LT_JAVA_VERS_INTERFACE = 105 +LT_JAVA_VERS_REVISION = 0 +LT_JAVA_VERS_AGE = 5 +LT_TOOLS_VERS_INTERFACE = 102 +LT_TOOLS_VERS_REVISION = 0 +LT_TOOLS_VERS_AGE = 0 # This is our main target lib_LTLIBRARIES = libhdf5_hl_cpp.la @@ -789,7 +798,7 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) -chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_EXTENSIONS = .sh SH_LOG_COMPILER = $(SHELL) AM_SH_LOG_FLAGS = @@ -1394,28 +1403,37 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================" > $${log}; \ fi; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log}; \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ else \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ fi; \ elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log};\ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log};\ else \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ + echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" >> $${log};\ fi; \ else \ - echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "Testing: $${tname} $(TEST_FLAGS)"; \ if test -n "$(REALTIMEOUTPUT)"; then \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" | tee -a $${log}; \ + echo "Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \ else \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + echo "Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \ fi; \ fi; \ if test -n "$(REALTIMEOUTPUT)"; then \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" | tee -a $${log}; \ + fi; \ + else \ + if test -n "$(HDF5_DRIVER)"; then \ + echo "Virtual file driver (VFD): $(HDF5_DRIVER)" >> $${log}; \ + fi; \ + fi; \ + if test -n "$(REALTIMEOUTPUT)"; then \ echo "============================" | tee -a $${log}; \ else \ echo "============================" >> $${log}; \ |