diff options
Diffstat (limited to 'hl/c++/test')
| -rw-r--r-- | hl/c++/test/Makefile.am | 37 | ||||
| -rw-r--r-- | hl/c++/test/Makefile.in | 688 | ||||
| -rw-r--r-- | hl/c++/test/ptableTest.cpp | 398 | ||||
| -rw-r--r-- | hl/c++/test/ptableTest.h | 39 |
4 files changed, 1162 insertions, 0 deletions
diff --git a/hl/c++/test/Makefile.am b/hl/c++/test/Makefile.am new file mode 100644 index 0000000..f81a4e1 --- /dev/null +++ b/hl/c++/test/Makefile.am @@ -0,0 +1,37 @@ +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +# +# HDF5-C++ Makefile(.in) +# + +include $(top_srcdir)/config/commence.am + +# Include src and c++/src directories +INCLUDES=-I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_srcdir)/hl/c++/src + +# C++ libraries and tests are built statically +AM_LDFLAGS=-static + +# These are our main targets. They should be listed in the order to be +# executed, generally most specific tests to least specific tests. +TEST_PROG=ptableTest +check_PROGRAMS=$(TEST_PROG) + +# The tests depend on the hdf5 library and the hdf5_hl library +LDADD=$(LIBH5CPP_HL) $(LIBH5_HL) $(LIBHDF5) + +ptableTest_SOURCES=ptableTest.cpp +include $(top_srcdir)/config/conclude.am diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in new file mode 100644 index 0000000..546dc83 --- /dev/null +++ b/hl/c++/test/Makefile.in @@ -0,0 +1,688 @@ +# Makefile.in generated by automake 1.9.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +# +# HDF5-C++ Makefile(.in) +# +SOURCES = $(ptableTest_SOURCES) + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../../.. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/commence.am \ + $(top_srcdir)/config/conclude.am +check_PROGRAMS = $(am__EXEEXT_1) +subdir = hl/c++/test +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +am__EXEEXT_1 = ptableTest$(EXEEXT) +am_ptableTest_OBJECTS = ptableTest.$(OBJEXT) +ptableTest_OBJECTS = $(am_ptableTest_OBJECTS) +ptableTest_LDADD = $(LDADD) +am__DEPENDENCIES_1 = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la +am__DEPENDENCIES_2 = $(top_builddir)/hl/src/libhdf5_hl.la +am__DEPENDENCIES_3 = $(top_builddir)/src/libhdf5.la +ptableTest_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) \ + $(am__DEPENDENCIES_3) +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src +depcomp = $(SHELL) $(top_srcdir)/bin/depcomp +am__depfiles_maybe = depfiles +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(ptableTest_SOURCES) +DIST_SOURCES = $(ptableTest_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +# Set the paths for autotools to be correct on heping. +# Ideally, these tools should never be needed during the build. +ACLOCAL = /usr/bin/aclocal +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AM_MAKEFLAGS = @AM_MAKEFLAGS@ +AR = @AR@ +AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf +AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader +AUTOMAKE = /usr/bin/automake +AWK = @AWK@ +BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@ +BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@ +BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@ +BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@ +BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@ +BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@ +BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@ +BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@ +BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@ +BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@ +BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_VERSION = @CC_VERSION@ +CFLAGS = @CFLAGS@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEBUG_PKG = @DEBUG_PKG@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ +F9XMODFLAG = @F9XMODFLAG@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FCFLAGS = @FCFLAGS@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MPE = @MPE@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PARALLEL = @PARALLEL@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_FC = @ac_ct_FC@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Include src and c++/src directories +INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_srcdir)/hl/c++/src + +# C++ libraries and tests are built statically +AM_LDFLAGS = -static + +# These are our main targets. They should be listed in the order to be +# executed, generally most specific tests to least specific tests. +TEST_PROG = ptableTest + +# The tests depend on the hdf5 library and the hdf5_hl library +LDADD = $(LIBH5CPP_HL) $(LIBH5_HL) $(LIBHDF5) +ptableTest_SOURCES = ptableTest.cpp + +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) + +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) + +TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +all: all-am + +.SUFFIXES: +.SUFFIXES: .cpp .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/test/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign hl/c++/test/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done +ptableTest$(EXEEXT): $(ptableTest_OBJECTS) $(ptableTest_DEPENDENCIES) + @rm -f ptableTest$(EXEEXT) + $(CXXLINK) $(ptableTest_LDFLAGS) $(ptableTest_OBJECTS) $(ptableTest_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptableTest.Po@am__quote@ + +.cpp.o: +@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< + +.cpp.obj: +@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.cpp.lo: +@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(mkdir_p) $(distdir)/../../../config + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile all-local +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am + +.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \ + clean clean-checkPROGRAMS clean-generic clean-libtool ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-info-am + + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) + +lib progs tests :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; \ + for d in X $(SUBDIRS); do \ + if test $$d != X -a $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @for test in $(TEST_PROG) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNTEST) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @for test in $(TEST_SCRIPT) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + /bin/sh $$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ + fi; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/hl/c++/test/ptableTest.cpp b/hl/c++/test/ptableTest.cpp new file mode 100644 index 0000000..e82d581 --- /dev/null +++ b/hl/c++/test/ptableTest.cpp @@ -0,0 +1,398 @@ +#include "ptableTest.h" + +/* Main test function */ +int main(void) +{ + herr_t err; + + /* Create new HDF5 file */ + fileID = H5Fcreate("test.h5", H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); + if(fileID <0) + fprintf(stderr, "Couldn't open file.\n"); + else { + + BasicTest(); + + TestCompoundDatatype(); + + TestGetPacket(); + + TestGetNext(); + + TestErrors(); + + SystemTest(); + + VariableLengthTest(); + + /* Terminate access to the file. */ + err = H5Fclose(fileID); + if( err < 0 ) + fprintf(stderr, "Failed to close file.\n"); + } +} + + +void BasicTest() +{ + printf("Basic Test running...\n"); + + herr_t err; + int myRecord; + int count; + int error; + + FL_PacketTable wrapper(fileID, "/basicTest", H5T_NATIVE_INT, 1); + assert(wrapper.IsValid()); + + /* Ensure initial count is zero */ + count = wrapper.GetPacketCount(error); + assert(count == 0); + assert(error == 0); + + myRecord = 1; + + /* add some records test */ + err = wrapper.AppendPacket(&myRecord); + if(err == -1) + printf("AppendHorizontalRecord failed.\n"); + else{ + + myRecord = 2; + + wrapper.AppendPacket(&myRecord); + + /* get number of records test */ + count = wrapper.GetPacketCount(); + + assert(count == 2); + + /* get records test */ + err = wrapper.GetPacket(0, &myRecord); + if(err == -1) + fprintf(stderr, "Error in GetPacket.\n"); + + assert(myRecord == 1); + + err = wrapper.GetPacket(1, &myRecord); + if(err == -1) + fprintf(stderr, "Error in GetPacket.\n"); + + assert(myRecord == 2); +} +} + +void TestCompoundDatatype() +{ +printf("TestCompoundDatatype running...\n"); + + hid_t dtypeID; + int error; + + /* Create compound datatype */ + typedef struct compoundType + { + short a, b, c; + int e; + } compoundType; + + dtypeID = H5Tcreate( H5T_COMPOUND, sizeof(compoundType)); + + H5Tinsert(dtypeID, "abbey", HOFFSET( compoundType, a ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID, "bert", HOFFSET( compoundType, b ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID, "charlie", HOFFSET( compoundType, c ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID, "ebert", HOFFSET( compoundType, e ), H5T_NATIVE_INT); + + /* Create packet table */ + FL_PacketTable wrapper(fileID, "/compoundTest", dtypeID, 1); + + assert(wrapper.IsValid()); + + compoundType first; + first.a = 1; + first.b = first.c = 3; + first.e = 5; + + /* Write packet */ + wrapper.AppendPacket(&first); + + int count = wrapper.GetPacketCount(error); + assert(count == 1); + + first.a = first.b = first.c = 0; + first.e = 0; + + /* Read packet back */ + wrapper.GetPacket(0, &first); + + assert(first.a == 1); + assert(first.e == 5); +} + +void TestGetNext() +{ +printf("TestGetNext running...\n"); + + int error; + + /* Create a dataset */ + FL_PacketTable wrapper(fileID, "/TestGetNext", H5T_NATIVE_INT, 1); + + assert(wrapper.IsValid()); + + int record; + int records[2]; + + /* Append 5 records to the dataset */ + for(record = 1; record < 6; record++) + wrapper.AppendPacket(&record); + + /* Ensure that we can interate through the records and get the right ones */ + for(int i = 1; i < 6; i++) + { + wrapper.GetNextPacket(&record); + assert(record == i); + } + + wrapper.ResetIndex(); + + /* Ensure that we can interate through the records and get the right ones */ + for(int i = 1; i < 6; i++) + { + error = wrapper.GetNextPacket(&record); + assert(record == i); + assert(error == 0); + } + + wrapper.SetIndex(1); + + /* Ensure we can get multiple records with our index pointer */ + wrapper.GetNextPackets(2, records); + assert(records[0] == 2); + assert(records[1] == 3); + + /* Ensure our pointer was updated correctly */ + wrapper.GetNextPacket(&record); + assert(record == 4); +} + +void TestGetPacket() +{ + printf("TestGetPacket running...\n"); + + /* Create a dataset */ + FL_PacketTable wrapper(fileID, "/TestGetPacket", H5T_NATIVE_INT, 1); + + assert(wrapper.IsValid()); + + int record; + + /* Append 5 records to the dataset */ + for(record = 1; record < 6; record++) + wrapper.AppendPacket(&record); + + /* Ensure that the records were written properly */ + wrapper.GetPacket(1, &record); + assert(record == 2); + + /* Ensure that we can retrieve multiple records */ + int theRecs[3] = {0, 0, 0}; + wrapper.GetPackets(1, 3, theRecs); + for(int i = 0; i < 3; i++) + assert(theRecs[i] == i+2); +} + +void TestErrors() +{ + printf("TestErrors running...\n"); + + /* Create a dataset */ + FL_PacketTable wrapper(fileID, "/TestErrors", H5T_NATIVE_INT, 1); + + assert(wrapper.IsValid()); + + int record; + int records[3]; + int error; + + /* Append 4 records to the dataset */ + for(record = 1; record < 5; record++) + wrapper.AppendPacket(&record); + + /* Try to confuse functions with bad indexes */ + error = wrapper.GetPacket(-1, &record); + assert(error == -1); + error = wrapper.GetPacket(4, &record); + assert(error == -1); + error = wrapper.GetPacket(-250, &record); + assert(error == -1); + error = wrapper.GetPacket(3000, &record); + assert(error == -1); + error = wrapper.GetPacket(1, &record); + assert(error == 0); + + error = wrapper.GetPackets(-1, 1, records); + assert(error == -1); + error = wrapper.GetPackets(2, 4, records); + assert(error == -1); + error = wrapper.GetPackets(-60, -62, records); + assert(error == -1); + error = wrapper.GetPackets(10, 12, records); + assert(error == -1); + error = wrapper.GetPackets(0, 2, records); + assert(error == 0); + error = wrapper.GetPackets(2, 0, records); + assert(error == -1); + error = wrapper.GetPackets(1, 1, records); + assert(error == 0); + error = wrapper.GetPackets(1, 3, records); + assert(error == 0); + + wrapper.ResetIndex(); + error = wrapper.SetIndex(-1); + assert(error == -1); + error = wrapper.GetNextPacket(&record); + assert(error == 0); + assert(record == 1); + error = wrapper.SetIndex(20); + assert(error == -1); + error = wrapper.GetNextPacket(&record); + assert(error == 0); + assert(record == 2); + wrapper.SetIndex(3); + error = wrapper.GetNextPacket(&record); + assert(error == 0); + assert(record == 4); + error = wrapper.GetNextPacket(&record); + assert(error == -1); + + wrapper.ResetIndex(); + error = wrapper.GetNextPackets(10, records); + assert(error == -1); + error = wrapper.GetNextPackets(0, records); + assert(error == 0); +} + +void SystemTest() +{ + printf("SystemTest running...\n"); + + hid_t dtypeID1, dtypeID2; + + /* Creating two inter-related datatypes. Create two datasets and put + * one datatype in each. */ + typedef struct compoundType + { + short a, b, c; + int e; + } compoundType; + + dtypeID1 = H5Tcreate( H5T_COMPOUND, sizeof(compoundType)); + + H5Tinsert(dtypeID1, "abbey", HOFFSET( compoundType, a ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID1, "bert", HOFFSET( compoundType, b ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID1, "charlie", HOFFSET( compoundType, c ), H5T_NATIVE_SHORT); + H5Tinsert(dtypeID1, "ebert", HOFFSET( compoundType, e ), H5T_NATIVE_INT); + + typedef struct cType2 + { + char f; + compoundType g; + } cType2; + + dtypeID2 = H5Tcreate ( H5T_COMPOUND, sizeof(cType2)); + + H5Tinsert(dtypeID2, "f", HOFFSET( cType2, f ), H5T_NATIVE_CHAR); + H5Tinsert(dtypeID2, "g", HOFFSET( cType2, g ), dtypeID1); + + cType2 ct2[10]; + ct2[0].f = 'h'; + ct2[0].g.a = 9; + ct2[0].g.b = -13; + ct2[0].g.c = 0; + ct2[0].g.e = 3000; + + /* Create the packet table datasets */ + FL_PacketTable wrapper1(fileID, "/SystemTest1", dtypeID1, 1); + FL_PacketTable wrapper2(fileID, "/SystemTest2", dtypeID2, 1); + + assert(wrapper1.IsValid()); + assert(wrapper2.IsValid()); + + /* Write and read packets, ensure that nothing is unusual */ + wrapper2.AppendPacket(ct2); + + unsigned int count = wrapper1.GetPacketCount(); + assert(count == 0); + + compoundType ct1[10]; + ct1[0].a = 31; + ct1[0].b = 4607; + ct1[0].c = -1002; + ct1[0].e = 3; + + ct2[1].f = 'b'; + ct2[1].g = ct1[0]; + + wrapper1.AppendPacket(ct1); + wrapper2.AppendPacket(&ct2[1]); + + wrapper1.ResetIndex(); + wrapper1.GetNextPacket(&ct1[1]); + wrapper2.GetPacket(1, &ct2[2]); + + assert(ct1[1].b == ct2[2].g.b); +} + +void VariableLengthTest(void) +{ + long test_long; + short test_short; + hvl_t read_buf; + + printf("VariableLengthTest running...\n"); + + /* Create a variable length table */ + VL_PacketTable* test_VLPT = new VL_PacketTable(fileID, "/VariableLengthTest", 1); + + /* Verify that the creation succeeded */ + assert(test_VLPT->IsValid()); + + /* Append some packets */ + test_short = 9; + test_VLPT->AppendPacket(&test_short, sizeof(short)); + test_long = 16; + test_VLPT->AppendPacket(&test_long, sizeof(long)); + + /* Read them back and make sure they are correct */ + test_VLPT->GetNextPackets(1, &read_buf); + + assert(read_buf.len == sizeof(short)); + assert(*(short *)(read_buf.p) == test_short); + + /* Free the memory used by the read */ + test_VLPT->FreeReadbuff(1, &read_buf); + + /* Read the second record */ + test_VLPT->GetNextPackets(1, &read_buf); + + assert(read_buf.len == sizeof(long)); + assert(*(long *)(read_buf.p) == test_long); + + /* Free the memory used by the read */ + test_VLPT->FreeReadbuff(1, &read_buf); + + /* Close the packet table */ + delete test_VLPT; + + /* Reopen the packet table and verify that it is variable length */ + PacketTable * new_pt = new PacketTable(fileID, "/VariableLengthTest"); + + /* Verify that the open succeeded */ + assert(new_pt->IsValid()); + + assert(new_pt->IsVariableLength() == 1); + + /* Close the packet table */ + delete new_pt; +} diff --git a/hl/c++/test/ptableTest.h b/hl/c++/test/ptableTest.h new file mode 100644 index 0000000..387a574 --- /dev/null +++ b/hl/c++/test/ptableTest.h @@ -0,0 +1,39 @@ +/* Test header for Packet Table C++ wrapper API */ +/* These tests are not as thorough as the tests for the C API because + * the C++ API is simply a wrapper. We don't need to test the + * actual Packet Table functionality, just that the C APIs are + * invoked correctly. + */ + +#ifndef PTABLETEST +#define PTABLETEST + +#include "H5PacketTable.h" +#include <assert.h> + +static hid_t fileID; + +/* Test some basic functionality; adding and getting records */ +void BasicTest(void); + +/* Test a compound fixed-length datatype */ +void TestCompoundDatatype(void); + +/* Test the GetNext functions and their indexes */ +void TestGetNext(void); + +/* Ensure that the functions return the correct errors in + * response to invalid indexes */ +void TestErrors(void); + +/* Test getting multiple records at once using GetPacket */ +void TestGetPacket(void); + +/* Create two packet tables at once using compound datatypes. + Test for unusual interactions between multiple packet tables. */ +void SystemTest(void); + +/* Test the variable length dataset functionality */ +void VariableLengthTest(void); + +#endif // PTABLETEST |