diff options
Diffstat (limited to 'hl/fortran/test/tstds.F90')
| -rw-r--r-- | hl/fortran/test/tstds.F90 | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/hl/fortran/test/tstds.F90 b/hl/fortran/test/tstds.F90 new file mode 100644 index 0000000..cbf6c38 --- /dev/null +++ b/hl/fortran/test/tstds.F90 @@ -0,0 +1,353 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! * Copyright by The HDF Group. * +! * Copyright by the Board of Trustees of the University of Illinois. * +! * All rights reserved. * +! * * +! * This file is part of HDF5. The full HDF5 copyright notice, including * +! * terms governing use, modification, and redistribution, is contained in * +! * the files COPYING and Copyright.html. COPYING can be found at the root * +! * of the source code distribution tree; Copyright.html can be found at the * +! * root level of an installed copy of the electronic HDF5 document set and * +! * is linked from the top-level documents page. It can also be found at * +! * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! * access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +PROGRAM test_ds + + IMPLICIT NONE + + INTEGER :: err + + CALL test_testds(err) + + IF(err.LT.0)THEN + WRITE(*,'(5X,A)') "DIMENSION SCALES TEST *FAILED*" + ENDIF + +END PROGRAM test_ds + +SUBROUTINE test_testds(err) + + USE HDF5 + USE H5LT + USE H5DS + + IMPLICIT NONE + + INTEGER, PARAMETER :: RANK = 2 ! rank of DATA dataset + INTEGER, PARAMETER :: DIM_DATA = 12 + INTEGER, PARAMETER :: DIM1_SIZE = 3 + INTEGER, PARAMETER :: DIM2_SIZE = 4 + INTEGER, PARAMETER :: DIM1 = 1 + INTEGER, PARAMETER :: DIM2 = 2 + INTEGER, PARAMETER :: FAILED = -1 + + CHARACTER(LEN=6), PARAMETER :: DSET_NAME = "Mydata" + CHARACTER(LEN=5), PARAMETER :: DS_1_NAME = "Yaxis" + CHARACTER(LEN=5), PARAMETER :: DS_1_NAME_A = "Yaxiz" + CHARACTER(LEN=5), PARAMETER :: DS_2_NAME = "Xaxis" + + + INTEGER(hid_t) :: fid ! file ID + INTEGER(hid_t) :: did ! dataset ID + INTEGER(hid_t) :: dsid ! DS dataset ID + INTEGER :: rankds = 1 ! rank of DS dataset + INTEGER(hsize_t), DIMENSION(1:rank) :: dims = (/DIM2_SIZE,DIM1_SIZE/) ! size of DATA dataset + INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/) ! DATA of DATA dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s1_dim = (/DIM1_SIZE/) ! size of DS 1 dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s2_dim = (/DIM2_SIZE/) ! size of DS 2 dataset + REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/) ! DATA of DS 1 dataset + INTEGER, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! DATA of DS 2 dataset + INTEGER :: err + INTEGER :: num_scales + INTEGER(size_t) :: name_len + CHARACTER(LEN=80) :: name + INTEGER(size_t) :: label_len + CHARACTER(LEN=80) :: label + LOGICAL :: is_attached, is_scale + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(err) + IF(err.LT.0) RETURN + + ! create a file using default properties + CALL H5Fcreate_f("tstds.h5",H5F_ACC_TRUNC_F, fid, err) + IF(err.LT.0) RETURN + + ! make a dataset + CALL H5LTmake_dataset_int_f(fid,DSET_NAME,rank,dims,buf, err) + IF(err.LT.0) RETURN + + ! make a DS dataset for the first dimension + CALL H5LTmake_dataset_float_f(fid,DS_1_NAME,rankds,s1_dim,s1_wbuf,err) + IF(err.LT.0) RETURN + + ! make a DS dataset for the second dimension + CALL H5LTmake_dataset_int_f(fid,DS_2_NAME,rankds,s2_dim,s2_wbuf,err) + IF(err.LT.0) RETURN + + !------------------------------------------------------------------------- + ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension 1 + !------------------------------------------------------------------------- + + CALL test_begin(' Test Attaching Dimension Scale ') + + ! get the dataset id for DSET_NAME + CALL H5Dopen_f(fid, DSET_NAME, did, err) + IF(err.LT.0) RETURN + + ! get the DS dataset id + CALL H5Dopen_f(fid, DS_1_NAME, dsid, err) + IF(err.LT.0) RETURN + + ! check attaching to a non-existent dimension; should fail + CALL H5DSattach_scale_f(did, dsid, 20, err) + IF(err.NE.-1) THEN + err = FAILED ! should fail, mark as an error + CALL write_test_status(err) + RETURN + ENDIF + + ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension index 1 + CALL H5DSattach_scale_f(did, dsid, DIM1, err) + IF(err.EQ.-1) THEN + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test If Dimension Scale Attached ') + + CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) + IF(err.EQ.-1.OR..NOT.is_attached) THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! Check to see how many Dimension Scales are attached + + CALL test_begin(' Test Getting Number Dimension Scales ') + + CALL H5DSget_num_scales_f(did, DIM1, num_scales, err) + IF(err.LT.0.OR.num_scales.NE.1)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test Detaching Dimension Scale ') + + ! Detach scale + CALL H5DSdetach_scale_f(did, dsid, DIM1, err) + IF(err.LT.0) RETURN + + ! Check to see if a dimension scale is attached, should be .false. + CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) + IF(err.LT.0.OR.is_attached)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + !------------------------------------------------------------------------- + ! set the DS_1_NAME dimension scale to DSET_NAME at dimension 0 + !------------------------------------------------------------------------- + + CALL test_begin(' Test Setting Dimension Scale ') + + CALL H5DSset_scale_f(dsid, err, "Dimension Scale Set 1") + IF(err.LT.0.OR.is_attached)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test If Dimension Scale ') + + CALL H5DSis_scale_f(dsid, is_scale, err) + IF(err.LT.0.OR..NOT.is_scale)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! Get scale name; test to large character buffer + + CALL test_begin(' Test Getting Dimension Scale By Name ') + + name_len = 25 + name = '' + CALL H5DSget_scale_name_f(dsid, name, name_len, err) + IF(err.LT.0 .OR. & + name_len.NE.21 .OR. & + TRIM(name).NE."Dimension Scale Set 1" .OR. & + name(22:25).NE.' ')THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name; test exact size character buffer + name_len = 21 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimension Scale Set 1")THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name; test to small character buffer + name_len = 5 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimen")THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! close DS id + CALL H5Dclose_f(dsid, err) + IF(err.LT.0) RETURN + + !------------------------------------------------------------------------- + ! attach the DS_2_NAME dimension scale to DSET_NAME + !------------------------------------------------------------------------- + + ! get the DS dataset id + CALL H5Dopen_f(fid, DS_2_NAME, dsid, err) + IF(err.LT.0) RETURN + + ! attach the DS_2_NAME dimension scale to DSET_NAME as the 2nd dimension (index 2) + CALL H5DSattach_scale_f(did, dsid, DIM2, err) + IF(err.LT.0) RETURN + + CALL H5DSis_attached_f(did, dsid, DIM2, is_attached, err) + IF(err.LT.0) RETURN + + ! test sending no Dimension Scale name + + CALL H5DSset_scale_f(dsid, err) + IF(err.LT.0)THEN + CALL write_test_status(err) + RETURN + ENDIF + + CALL H5DSis_scale_f(dsid, is_scale, err) + IF(err.LT.0.OR..NOT.is_scale)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name when there is no scale name + name_len = 5 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.0)THEN ! name_len is 0 if no name is found + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + CALL write_test_status(err) + + CALL test_begin(' Test Setting Dimension Scale Label ') + + CALL H5DSset_label_f(did, DIM2, "Label12", err) + IF(err.LT.0)THEN + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is to small + + label_len = 5 + label = '' + CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) + IF(err.LT.0.OR.label(1:5).NE."Label".OR.label_len.NE.7)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is exact + + label_len = 7 + label = '' + CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) + IF(err.LT.0.OR.label(1:label_len).NE."Label12".OR.label_len.NE.7)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is to big + + label_len = 25 + label = '' + CALL H5DSget_label_f(did, DIM2, label, label_len, err) + IF(err.LT.0.OR. & + label(1:label_len).NE."Label12" .OR. & + label_len.NE.7 .OR. & + label(8:25).NE.' ')THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! close DS id + CALL H5Dclose_f(dsid, err) + IF(err.LT.0) RETURN + + ! close file + CALL H5Fclose_f(fid, err) + IF(err.LT.0) RETURN + +END SUBROUTINE test_testds + +!------------------------------------------------------------------------- +! test_begin +!------------------------------------------------------------------------- + +SUBROUTINE test_begin(string) + CHARACTER(LEN=*), INTENT(IN) :: string + WRITE(*, fmt = '(A)', advance = 'no') ADJUSTL(string) +END SUBROUTINE test_begin + +!------------------------------------------------------------------------- +! passed/failed +!------------------------------------------------------------------------- +SUBROUTINE write_test_status( test_result) + +! Writes the results of the tests + + IMPLICIT NONE + + INTEGER, INTENT(IN) :: test_result ! negative, failed + ! 0 , passed + +! Controls the output style for reporting test results + + CHARACTER(LEN=8) :: error_string + CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' + CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' + + error_string = failure + IF (test_result .EQ. 0) THEN + error_string = success + ENDIF + + WRITE(*, fmt = '(T34, A)') error_string + +END SUBROUTINE write_test_status |