9 files changed, 939 insertions, 6221 deletions

diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
deleted file mode 100644
index bd2ac82..0000000
--- a/hl/fortran/Makefile.in
+++ /dev/null
@@ -1,1388 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# 
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order.  You can alternatively invoke make from
-# each subdirectory manually.
-#
-# HDF5 High-Level Makefile(.in)
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl/fortran
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-SUBDIRS = src test
-DIST_SUBDIRS = src test examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in
deleted file mode 100644
index c992e8a..0000000
--- a/hl/fortran/examples/Makefile.in
+++ /dev/null
@@ -1,1325 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-Fortran Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-hlfortran-ex.sh.in $(top_srcdir)/bin/test-driver
-TESTS =
-subdir = hl/fortran/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-hlfortran-ex.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-
-# Compile parallel fortran examples only if parallel is enabled
-@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
-
-# These are the programs that 'make all' or 'make tests' will build and
-# that 'make check' will run.  List them in the order in which they should
-# be run.
-# We don't tell automake about these programs so that it doesn't try to
-# compile them with the regular fortran compiler.
-EXAMPLE_PROG = exlite ex_ds1
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# List files to be installed here
-INSTALL_FILES = exlite.f90 ex_ds1.f90
-INSTALL_SCRIPT_FILES = run-hlfortran-ex.sh
-
-# Mark this directory as part of the Fortran API (this affects output
-# from tests in conclude.am)
-FORTRAN_API = yes
-
-# Tell automake how to install examples
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/fortran
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .log .o .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-hlfortran-ex.sh: $(top_builddir)/config.status $(srcdir)/run-hlfortran-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Tell automake how to build examples using h5fc
-@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5FC_PP)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5FC_PP) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5FC)
-@BUILD_PARALLEL_CONDITIONAL_FALSE@	$(H5FC) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# List dependencies for each example.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C compiler, not h5cc.  This is
-# an inelegant way of solving the problem.
-# All programs share the same build rule and a dependency on the main hdf5
-# and fortran libraries above.
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/src/CMakeLists.txt b/hl/fortran/src/CMakeLists.txt
index 5df4e1d..ead21be 100644
--- a/hl/fortran/src/CMakeLists.txt
+++ b/hl/fortran/src/CMakeLists.txt
@@ -38,17 +38,16 @@ set_target_properties (H5HL_buildiface PROPERTIES
 
 if (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED)
   if (WIN32)
-    set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared/\${BUILD_TYPE})
+    set (MODSH_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared/\${BUILD_TYPE})
   else (WIN32)
-    set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared)
-  endif (WIN32)
-else (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED)
-  if (WIN32)
-    set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static/\${BUILD_TYPE})
-  else (WIN32)
-    set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static)
+    set (MODSH_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared)
   endif (WIN32)
 endif (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED)
+if (WIN32)
+  set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static/\${BUILD_TYPE})
+else (WIN32)
+  set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static)
+endif (WIN32)
 
 #-----------------------------------------------------------------------------
 # Setup include Directories
@@ -198,11 +197,30 @@ install (
     FILES
         ${mod_files}
     DESTINATION
-        ${HDF5_INSTALL_INCLUDE_DIR}
+        ${HDF5_INSTALL_INCLUDE_DIR}/static
     COMPONENT
         fortheaders
 )
 
+if (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED)
+  set (modsh_files
+      ${MODSH_BUILD_DIR}/h5ds.mod
+      ${MODSH_BUILD_DIR}/h5tb.mod
+      ${MODSH_BUILD_DIR}/h5tb_const.mod
+      ${MODSH_BUILD_DIR}/h5lt.mod
+      ${MODSH_BUILD_DIR}/h5lt_const.mod
+      ${MODSH_BUILD_DIR}/h5im.mod
+  )
+  install (
+      FILES
+          ${modsh_files}
+      DESTINATION
+          ${HDF5_INSTALL_INCLUDE_DIR}/shared
+      COMPONENT
+          fortheaders
+  )
+endif (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED)
+
 #-----------------------------------------------------------------------------
 # Add Target(s) to CMake Install for import into other projects
 #-----------------------------------------------------------------------------
diff --git a/hl/fortran/src/H5HL_buildiface.F90 b/hl/fortran/src/H5HL_buildiface.F90
index 0e85e27..9dd879c 100644
--- a/hl/fortran/src/H5HL_buildiface.F90
+++ b/hl/fortran/src/H5HL_buildiface.F90
@@ -83,13 +83,13 @@ PROGRAM H5HL_buildiface
             /)
 ! pointer to the buffer
   CHARACTER(LEN=37), DIMENSION(1:8), PARAMETER :: f_ptr_line=(/ &
-       '    f_ptr = C_LOC(buf)               ', &
-       '    f_ptr = C_LOC(buf(1))            ', &
-       '    f_ptr = C_LOC(buf(1,1))          ', &
-       '    f_ptr = C_LOC(buf(1,1,1))        ', &
-       '    f_ptr = C_LOC(buf(1,1,1,1))      ', &
-       '    f_ptr = C_LOC(buf(1,1,1,1,1))    ', &
-       '    f_ptr = C_LOC(buf(1,1,1,1,1,1))  ', &
+       '    f_ptr = C_LOC(buf               )', &
+       '    f_ptr = C_LOC(buf(1)            )', &
+       '    f_ptr = C_LOC(buf(1,1)          )', &
+       '    f_ptr = C_LOC(buf(1,1,1)        )', &
+       '    f_ptr = C_LOC(buf(1,1,1,1)      )', &
+       '    f_ptr = C_LOC(buf(1,1,1,1,1)    )', &
+       '    f_ptr = C_LOC(buf(1,1,1,1,1,1)  )', &
        '    f_ptr = C_LOC(buf(1,1,1,1,1,1,1))' &
             /)
 
@@ -154,6 +154,13 @@ PROGRAM H5HL_buildiface
         WRITE(11,'(A)') "     MODULE PROCEDURE h5ltmake_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
      ENDDO
   END DO
+  DO i = 1, num_ikinds
+     j = ikind(i)
+     WRITE(chr2,'(I2)') j
+     DO k = 1, 8
+        WRITE(11,'(A)') "     MODULE PROCEDURE h5ltmake_dataset_integer_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
+     ENDDO
+  END DO
   WRITE(11,'(A)') "  END INTERFACE"
 
 !  h5ltread_dataset_f
@@ -165,6 +172,35 @@ PROGRAM H5HL_buildiface
         WRITE(11,'(A)') "     MODULE PROCEDURE h5ltread_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
      ENDDO
   END DO
+  DO i = 1, num_ikinds
+     j = ikind(i)
+     WRITE(chr2,'(I2)') j
+     DO k = 1, 8
+        WRITE(11,'(A)') "     MODULE PROCEDURE h5ltread_dataset_integer_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
+     ENDDO
+  END DO
+  WRITE(11,'(A)') "  END INTERFACE"
+
+! h5ltread_dataset_int_f
+  WRITE(11,'(A)') "  INTERFACE h5ltread_dataset_int_f"
+  DO i = 1, num_ikinds
+     j = ikind(i)
+     WRITE(chr2,'(I2)') j
+     DO k = 1, 8
+        WRITE(11,'(A)') "     MODULE PROCEDURE h5ltread_dataset_int_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
+     ENDDO
+  END DO
+  WRITE(11,'(A)') "  END INTERFACE"
+
+!  h5ltmake_dataset_int_f
+  WRITE(11,'(A)') "  INTERFACE h5ltmake_dataset_int_f"
+  DO i = 1, num_ikinds
+     j = ikind(i)
+     WRITE(chr2,'(I2)') j
+     DO k = 1, 8
+        WRITE(11,'(A)') "     MODULE PROCEDURE h5ltmake_dataset_int_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k)
+     ENDDO
+  END DO
   WRITE(11,'(A)') "  END INTERFACE"
 
 !  h5ltmake_dataset_float_f
@@ -346,7 +382,6 @@ PROGRAM H5HL_buildiface
      k = rkind(i)
      WRITE(chr2,'(I2)') k
      DO j = 1, 8
-
 ! DLL definitions for windows
         WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)'
         WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
@@ -402,6 +437,134 @@ PROGRAM H5HL_buildiface
      ENDDO
   ENDDO
 
+! h5ltmake_dataset_f
+  DO i = 1, num_ikinds
+     k = ikind(i)
+     WRITE(chr2,'(I2)') k
+     DO j = 1, 8
+
+! DLL definitions for windows
+        WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)'
+        WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+        WRITE(11,'(A)') '!DEC$endif'
+
+! Subroutine API
+        WRITE(11,'(A)') '  SUBROUTINE h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))&
+             &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,type_id,buf,errcode)'
+        WRITE(11,'(A)') '    IMPLICIT NONE'
+        WRITE(11,'(A)') '    INTEGER(hid_t)  , INTENT(IN) :: loc_id'
+        WRITE(11,'(A)') '    CHARACTER(LEN=*), INTENT(IN) :: dset_name'
+        WRITE(11,'(A)') '    INTEGER,          INTENT(IN) :: rank'
+        WRITE(11,'(A)') '    INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims'
+        WRITE(11,'(A)') '    INTEGER(hid_t),   INTENT(in) :: type_id'
+        WRITE(11,'(A)') '    INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf'
+        WRITE(11,'(A)') '    INTEGER :: errcode '
+        WRITE(11,'(A)') '    TYPE(C_PTR) :: f_ptr'
+        WRITE(11,'(A)') '    INTEGER(size_t) :: namelen'
+        
+        WRITE(11,'(A)') f_ptr_line(j)
+        WRITE(11,'(A)') '    namelen = LEN(dset_name)'
+        WRITE(11,'(A)') '    errcode = h5ltmake_dataset_c(loc_id, namelen, dset_name, rank, dims, type_id, f_ptr)'
+        WRITE(11,'(A)') '  END SUBROUTINE h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+     ENDDO
+  ENDDO
+
+! h5ltmake_dataset_int_f
+  DO i = 1, num_ikinds
+     k = ikind(i)
+     WRITE(chr2,'(I2)') k
+     DO j = 1, 8
+
+! DLL definitions for windows
+        WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)'
+        WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+        WRITE(11,'(A)') '!DEC$endif'
+
+! Subroutine API
+        WRITE(11,'(A)') '  SUBROUTINE h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))&
+             &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,buf,errcode)'
+        WRITE(11,'(A)') '    IMPLICIT NONE'
+        WRITE(11,'(A)') '    INTEGER(hid_t)  , INTENT(IN) :: loc_id'
+        WRITE(11,'(A)') '    CHARACTER(LEN=*), INTENT(IN) :: dset_name'
+        WRITE(11,'(A)') '    INTEGER,          INTENT(IN) :: rank'
+        WRITE(11,'(A)') '    INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims'
+        WRITE(11,'(A)') '    INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf'
+        WRITE(11,'(A)') '    INTEGER :: errcode '
+        WRITE(11,'(A)') '    TYPE(C_PTR) :: f_ptr'
+        WRITE(11,'(A)') '    INTEGER(size_t) :: namelen'
+        WRITE(11,'(A)') '    INTEGER(hid_t) :: type_id'
+        
+        WRITE(11,'(A)') f_ptr_line(j)
+        WRITE(11,'(A)') '    namelen = LEN(dset_name)'
+        WRITE(11,'(A)') '    type_id = h5kind_to_type(KIND('//f_ptr_line(j)(19:36)//'), H5_INTEGER_KIND)'
+        WRITE(11,'(A)') '    errcode = h5ltmake_dataset_c(loc_id, namelen, dset_name, rank, dims, type_id, f_ptr)'
+        WRITE(11,'(A)') '  END SUBROUTINE h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+     ENDDO
+  ENDDO
+
+! h5ltread_dataset_f
+  DO i = 1, num_ikinds
+     k = ikind(i)
+     WRITE(chr2,'(I2)') k
+     DO j = 1, 8
+
+! DLL definitions for windows
+        WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)'
+        WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+        WRITE(11,'(A)') '!DEC$endif'
+
+! Subroutine API
+        WRITE(11,'(A)') '  SUBROUTINE h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))&
+             &//'_rank'//chr_rank(j)//'(loc_id,dset_name, type_id, buf,dims,errcode)'
+        WRITE(11,'(A)') '    IMPLICIT NONE'
+        WRITE(11,'(A)') '    INTEGER(hid_t)  , INTENT(IN) :: loc_id'
+        WRITE(11,'(A)') '    CHARACTER(LEN=*), INTENT(IN) :: dset_name'
+        WRITE(11,'(A)') '    INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims'
+        WRITE(11,'(A)') '    INTEGER(hid_t),   INTENT(in) :: type_id'
+        WRITE(11,'(A)') '    INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf'
+        WRITE(11,'(A)') '    INTEGER :: errcode '
+        WRITE(11,'(A)') '    TYPE(C_PTR) :: f_ptr'
+        WRITE(11,'(A)') '    INTEGER(size_t) :: namelen'
+
+        WRITE(11,'(A)') f_ptr_line(j)
+        WRITE(11,'(A)') '    namelen = LEN(dset_name)'
+        WRITE(11,'(A)') '    errcode = h5ltread_dataset_c(loc_id, namelen, dset_name, type_id, f_ptr)'
+        WRITE(11,'(A)') '  END SUBROUTINE h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+     ENDDO
+  ENDDO
+
+! h5ltread_dataset_int_f
+  DO i = 1, num_ikinds
+     k = ikind(i)
+     WRITE(chr2,'(I2)') k
+     DO j = 1, 8
+
+! DLL definitions for windows
+        WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)'
+        WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+        WRITE(11,'(A)') '!DEC$endif'
+
+! Subroutine API
+        WRITE(11,'(A)') '  SUBROUTINE h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))&
+             &//'_rank'//chr_rank(j)//'(loc_id,dset_name, buf,dims,errcode)'
+        WRITE(11,'(A)') '    IMPLICIT NONE'
+        WRITE(11,'(A)') '    INTEGER(hid_t)  , INTENT(IN) :: loc_id'
+        WRITE(11,'(A)') '    CHARACTER(LEN=*), INTENT(IN) :: dset_name'
+        WRITE(11,'(A)') '    INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims'
+        WRITE(11,'(A)') '    INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf'
+        WRITE(11,'(A)') '    INTEGER :: errcode '
+        WRITE(11,'(A)') '    TYPE(C_PTR) :: f_ptr'
+        WRITE(11,'(A)') '    INTEGER(size_t) :: namelen'
+        WRITE(11,'(A)') '    INTEGER(hid_t) :: type_id'
+
+        WRITE(11,'(A)') f_ptr_line(j)
+        WRITE(11,'(A)') '    namelen = LEN(dset_name)'
+        WRITE(11,'(A)') '    type_id = h5kind_to_type(KIND('//f_ptr_line(j)(19:36)//'), H5_INTEGER_KIND)'
+        WRITE(11,'(A)') '    errcode = h5ltread_dataset_c(loc_id, namelen, dset_name, type_id, f_ptr)'
+        WRITE(11,'(A)') '  END SUBROUTINE h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j)
+     ENDDO
+  ENDDO
+
   WRITE(11,'(A)') 'END MODULE H5LT' ! change this to be generic MSB
 
   CLOSE(11)
diff --git a/hl/fortran/src/H5LTfc.c b/hl/fortran/src/H5LTfc.c
index c955590..3a94664 100644
--- a/hl/fortran/src/H5LTfc.c
+++ b/hl/fortran/src/H5LTfc.c
@@ -298,7 +298,7 @@ h5ltset_attribute_c(hid_t_f *loc_id,
 		         void *buf, char *dtype, size_t_f *sizeof_val)
 {
     int     ret_value = -1;
-    herr_t  ret;
+    herr_t  ret = SUCCEED;
     hid_t   c_loc_id;
     char    *c_name = NULL;
     char    *c_attrname = NULL;
@@ -394,7 +394,7 @@ h5ltget_attribute_c(hid_t_f *loc_id,
 		         void *buf, char *dtype, size_t_f *sizeof_val)
 {
     int     ret_value = -1;
-    herr_t  ret;
+    herr_t  ret = SUCCEED;
     hid_t   c_loc_id;
     char    *c_name = NULL;
     char    *c_attrname = NULL;
diff --git a/hl/fortran/src/H5LTff.F90 b/hl/fortran/src/H5LTff.F90
index ffc7ab5..d36d92c 100644
--- a/hl/fortran/src/H5LTff.F90
+++ b/hl/fortran/src/H5LTff.F90
@@ -38,47 +38,13 @@ MODULE H5LT_CONST
   USE hdf5
 
   INTERFACE h5ltmake_dataset_f
-     MODULE PROCEDURE h5ltmake_dataset_f_int1
-     MODULE PROCEDURE h5ltmake_dataset_f_int2
-     MODULE PROCEDURE h5ltmake_dataset_f_int3
-     MODULE PROCEDURE h5ltmake_dataset_f_int4
-     MODULE PROCEDURE h5ltmake_dataset_f_int5
-     MODULE PROCEDURE h5ltmake_dataset_f_int6
-     MODULE PROCEDURE h5ltmake_dataset_f_int7
      MODULE PROCEDURE h5ltmake_dataset_f_ptr
   END INTERFACE
 
   INTERFACE h5ltread_dataset_f
-     MODULE PROCEDURE h5ltread_dataset_f_int1
-     MODULE PROCEDURE h5ltread_dataset_f_int2
-     MODULE PROCEDURE h5ltread_dataset_f_int3
-     MODULE PROCEDURE h5ltread_dataset_f_int4
-     MODULE PROCEDURE h5ltread_dataset_f_int5
-     MODULE PROCEDURE h5ltread_dataset_f_int6
-     MODULE PROCEDURE h5ltread_dataset_f_int7
      MODULE PROCEDURE h5ltread_dataset_f_ptr
   END INTERFACE
 
-  INTERFACE h5ltmake_dataset_int_f
-     MODULE PROCEDURE h5ltmake_dataset_int_f_1
-     MODULE PROCEDURE h5ltmake_dataset_int_f_2
-     MODULE PROCEDURE h5ltmake_dataset_int_f_3
-     MODULE PROCEDURE h5ltmake_dataset_int_f_4
-     MODULE PROCEDURE h5ltmake_dataset_int_f_5
-     MODULE PROCEDURE h5ltmake_dataset_int_f_6
-     MODULE PROCEDURE h5ltmake_dataset_int_f_7
-  END INTERFACE
-
-  INTERFACE h5ltread_dataset_int_f
-     MODULE PROCEDURE h5ltread_dataset_int_f_1
-     MODULE PROCEDURE h5ltread_dataset_int_f_2
-     MODULE PROCEDURE h5ltread_dataset_int_f_3
-     MODULE PROCEDURE h5ltread_dataset_int_f_4
-     MODULE PROCEDURE h5ltread_dataset_int_f_5
-     MODULE PROCEDURE h5ltread_dataset_int_f_6
-     MODULE PROCEDURE h5ltread_dataset_int_f_7
-  END INTERFACE
-
   INTERFACE
      INTEGER FUNCTION h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) &
           BIND(C,NAME='h5ltmake_dataset_c')
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
deleted file mode 100644
index 6ceb7c7..0000000
--- a/hl/fortran/src/Makefile.in
+++ /dev/null
@@ -1,1521 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-#
-# HDF5 High-Level Fortran Makefile(.in)
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# want to build a shared C library and a static Fortran library.  If so,
-# pass the -static flag to the library linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-noinst_PROGRAMS = H5HL_buildiface$(EXEEXT)
-TESTS =
-subdir = hl/fortran/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5hl_fortran_la_DEPENDENCIES = $(LIBH5_HL) $(LIBH5F)
-am_libhdf5hl_fortran_la_OBJECTS = H5DSfc.lo H5LTfc.lo H5IMfc.lo \
-	H5IMcc.lo H5TBfc.lo H5DSff.lo H5LTff.lo H5TBff.lo H5IMff.lo \
-	H5LTff_gen.lo H5TBff_gen.lo
-libhdf5hl_fortran_la_OBJECTS = $(am_libhdf5hl_fortran_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5hl_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(FCLD) \
-	$(AM_FCFLAGS) $(FCFLAGS) $(libhdf5hl_fortran_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-PROGRAMS = $(noinst_PROGRAMS)
-am_H5HL_buildiface_OBJECTS = H5HL_buildiface.$(OBJEXT)
-H5HL_buildiface_OBJECTS = $(am_H5HL_buildiface_OBJECTS)
-H5HL_buildiface_LDADD = $(LDADD)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libhdf5hl_fortran_la_SOURCES) $(H5HL_buildiface_SOURCES)
-DIST_SOURCES = $(libhdf5hl_fortran_la_SOURCES) \
-	$(H5HL_buildiface_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \
-	-I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 219
-LT_VERS_AGE = 0
-
-# Our main target, the high-level fortran library
-lib_LTLIBRARIES = libhdf5hl_fortran.la
-
-# Add libtool numbers to the HDF5 HL Fortran library (from config/lt_vers.am)
-libhdf5hl_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-
-# Source files for the library
-#if BUILD_PARALLEL_CONDITIONAL
-#    PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.F90
-#endif
-
-# List sources to include in the HDF5 HL Fortran library.
-libhdf5hl_fortran_la_SOURCES = H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \
-	H5DSff.F90 H5LTff.F90 H5TBff.F90 H5IMff.F90 H5LTff_gen.F90 H5TBff_gen.F90
-
-
-# HDF5 HL Fortran library depends on HDF5 Library.
-libhdf5hl_fortran_la_LIBADD = $(LIBH5_HL) $(LIBH5F)
-
-#H5TBff_gen.F90: H5HL_buildiface$(EXEEXT)
-
-# H5HL_buildiface.F90 is included in the distribution, and Automake knows
-# how to compile a fortran program given its sources.
-H5HL_buildiface_SOURCES = H5HL_buildiface.F90
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5hl_fortran.la: $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_DEPENDENCIES) $(EXTRA_libhdf5hl_fortran_la_DEPENDENCIES) 
-	$(AM_V_FCLD)$(libhdf5hl_fortran_la_LINK) -rpath $(libdir) $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_LIBADD) $(LIBS)
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-H5HL_buildiface$(EXEEXT): $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_DEPENDENCIES) $(EXTRA_H5HL_buildiface_DEPENDENCIES) 
-	@rm -f H5HL_buildiface$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DSfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMcc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TBfc.Plo@am__quote@
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
-	clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-local distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic \
-	maintainer-clean-local
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \
-	ctags ctags-am distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-local distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-data-local install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am \
-	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic maintainer-clean-local mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am uninstall-libLTLIBRARIES \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# Fortran module files can have different extensions and different names
-# (e.g., different capitalizations) on different platforms.  Write rules
-# for them explicitly rather than trying to teach automake about them.
-# They should be installed as headers and removed during clean.
-maintainer-clean-local: clean-local
-distclean-local: clean-local
-clean-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(RM) *.$(F9XMODEXT) H5LTff_gen.F90 H5TBff_gen.F90; \
-	fi
-
-install-data-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(DESTDIR)$(includedir)/. ; \
-	fi
-
-uninstall-local:
-	@if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then      \
-	  if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(DESTDIR)$(includedir)/HDF5.$(F9XMODEXT)"; then \
-	    set -x; $(RM) $(includedir)/*.$(F9XMODEXT);                 \
-	  fi;                                                           \
-	fi
-
-# H5HL_buildiface.F90 generates all the APIs that have a KIND type associated
-# with them.
-
-H5LTff_gen.F90: H5HL_buildiface$(EXEEXT)
-	$(RUNSERIAL) ./H5HL_buildiface$(EXEEXT)
-
-H5TBff_gen.F90: H5HL_buildiface$(EXEEXT)
-# Hardcode the dependencies of these files. There isn't a known way of
-# determining this automagically (like we do with the C files). So, when
-# doing a parallel make, some modules could be made way before the
-# modules they depend upon are actually made. *sigh*
-H5DSff.lo:          $(srcdir)/H5DSff.F90
-H5LTff.lo:          $(srcdir)/H5LTff.F90
-H5IMff.lo:          $(srcdir)/H5IMff.F90
-H5TBff.lo:          $(srcdir)/H5TBff.F90
-H5LTff_gen.lo:      H5LTff.lo H5LTff_gen.F90
-H5TBff_gen.lo:      H5TBff.lo H5LTff_gen.F90 H5TBff_gen.F90
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
deleted file mode 100644
index da46790..0000000
--- a/hl/fortran/test/Makefile.in
+++ /dev/null
@@ -1,1400 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-#
-# HDF5 High-Level Fortran Makefile(.in)
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# need to make sure the Fortran programs link against the static version
-# of the HDF5 library.  We do this by passing the -static flag to the linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1)
-subdir = hl/fortran/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = tstds$(EXEEXT) tstlite$(EXEEXT) tstimage$(EXEEXT) \
-	tsttable$(EXEEXT)
-am_tstds_OBJECTS = tstds.$(OBJEXT)
-tstds_OBJECTS = $(am_tstds_OBJECTS)
-tstds_LDADD = $(LDADD)
-tstds_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-am_tstimage_OBJECTS = tstimage.$(OBJEXT)
-tstimage_OBJECTS = $(am_tstimage_OBJECTS)
-tstimage_LDADD = $(LDADD)
-tstimage_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-am_tstlite_OBJECTS = tstlite.$(OBJEXT)
-tstlite_OBJECTS = $(am_tstlite_OBJECTS)
-tstlite_LDADD = $(LDADD)
-tstlite_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-am_tsttable_OBJECTS = tsttable.$(OBJEXT)
-tsttable_OBJECTS = $(am_tsttable_OBJECTS)
-tsttable_LDADD = $(LDADD)
-tsttable_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-SOURCES = $(tstds_SOURCES) $(tstimage_SOURCES) $(tstlite_SOURCES) \
-	$(tsttable_SOURCES)
-DIST_SOURCES = $(tstds_SOURCES) $(tstimage_SOURCES) $(tstlite_SOURCES) \
-	$(tsttable_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_builddir)/src -I$(top_srcdir)/hl/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \
-	-I$(top_builddir)/hl/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/hl/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 dsetf[1-5].h5 \
-	f1img.h5 f1tab.h5 tstds.h5
-
-# Our main target, the test programs
-TEST_PROG = tstds tstlite tstimage tsttable
-LDADD = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL)  $(LIBHDF5)
-
-# Source files for the programs
-tstds_SOURCES = tstds.F90
-tstlite_SOURCES = tstlite.F90
-tstimage_SOURCES = tstimage.F90
-tsttable_SOURCES = tsttable.F90
-
-# Mark this directory as part of the Fortran API (this affects output
-# from tests in conclude.am)
-FORTRAN_API = yes
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-tstds$(EXEEXT): $(tstds_OBJECTS) $(tstds_DEPENDENCIES) $(EXTRA_tstds_DEPENDENCIES) 
-	@rm -f tstds$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstds_OBJECTS) $(tstds_LDADD) $(LIBS)
-
-tstimage$(EXEEXT): $(tstimage_OBJECTS) $(tstimage_DEPENDENCIES) $(EXTRA_tstimage_DEPENDENCIES) 
-	@rm -f tstimage$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstimage_OBJECTS) $(tstimage_LDADD) $(LIBS)
-
-tstlite$(EXEEXT): $(tstlite_OBJECTS) $(tstlite_DEPENDENCIES) $(EXTRA_tstlite_DEPENDENCIES) 
-	@rm -f tstlite$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstlite_OBJECTS) $(tstlite_LDADD) $(LIBS)
-
-tsttable$(EXEEXT): $(tsttable_OBJECTS) $(tsttable_DEPENDENCIES) $(EXTRA_tsttable_DEPENDENCIES) 
-	@rm -f tsttable$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tsttable_OBJECTS) $(tsttable_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-tstds.log: tstds$(EXEEXT)
-	@p='tstds$(EXEEXT)'; \
-	b='tstds'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tstlite.log: tstlite$(EXEEXT)
-	@p='tstlite$(EXEEXT)'; \
-	b='tstlite'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tstimage.log: tstimage$(EXEEXT)
-	@p='tstimage$(EXEEXT)'; \
-	b='tstimage'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tsttable.log: tsttable$(EXEEXT)
-	@p='tsttable$(EXEEXT)'; \
-	b='tsttable'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/test/tstlite.F90 b/hl/fortran/test/tstlite.F90
index 0eb005b..0ba7815 100644
--- a/hl/fortran/test/tstlite.F90
+++ b/hl/fortran/test/tstlite.F90
@@ -19,7 +19,7 @@
 #include <H5config_f.inc>
 
 PROGRAM lite_test
-
+  
   CALL test_dataset1D()
   CALL test_dataset2D()
   CALL test_dataset3D()
@@ -38,149 +38,148 @@ END PROGRAM lite_test
 !-------------------------------------------------------------------------
 
 SUBROUTINE test_dataset1D()
+  
+  USE, INTRINSIC :: ISO_C_BINDING
+  USE H5LT ! module of H5LT
+  USE HDF5 ! module of HDF5 library
+  
+  IMPLICIT NONE
+  
+  INTEGER, PARAMETER :: DIM1 = 4                       ! Dimension of array
+  CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name
+  CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"   ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"   ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"   ! Dataset name
+  INTEGER(HID_T) :: file_id                            ! File identifier
+  INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/)    ! Dataset dimensions
+  INTEGER        :: rank = 1                           ! Dataset rank
+  INTEGER, DIMENSION(DIM1) :: buf1                     ! Data buffer
+  INTEGER, DIMENSION(DIM1) :: bufr1                    ! Data buffer
+  REAL, DIMENSION(DIM1)    :: buf2                     ! Data buffer
+  REAL, DIMENSION(DIM1)    :: bufr2                    ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf3    ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr3   ! Data buffer
+  INTEGER        :: errcode                            ! Error flag
+  INTEGER        :: i                                  ! general purpose integer
+  TYPE(C_PTR) :: f_ptr
+  integer(HID_T) :: mytype
 
-USE, INTRINSIC :: ISO_C_BINDING
-USE H5LT ! module of H5LT
-USE HDF5 ! module of HDF5 library
-
-IMPLICIT NONE
-
-INTEGER, PARAMETER :: DIM1 = 4;                      ! Dimension of array
-CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name
-CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"   ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"   ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"   ! Dataset name
-INTEGER(HID_T) :: file_id                            ! File identifier
-INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/)    ! Dataset dimensions
-INTEGER        :: rank = 1                           ! Dataset rank
-INTEGER, DIMENSION(DIM1) :: buf1                     ! Data buffer
-INTEGER, DIMENSION(DIM1) :: bufr1                    ! Data buffer
-REAL, DIMENSION(DIM1)    :: buf2                     ! Data buffer
-REAL, DIMENSION(DIM1)    :: bufr2                    ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf3    ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr3   ! Data buffer
-INTEGER        :: errcode                            ! Error flag
-INTEGER        :: i                                  ! general purpose integer
-TYPE(C_PTR) :: f_ptr
-integer(HID_T) :: mytype
-
-CALL test_begin(' Make/Read datasets (1D)        ')
-
-!
-! Initialize the data array.
-!
-DO i = 1, DIM1
-  buf1(i) = i;
-  buf2(i) = i;
-  buf3(i) = i;
-END DO
+  CALL test_begin(' Make/Read datasets (1D)        ')
 
-!
-! Initialize FORTRAN predefined datatypes.
-!
-CALL h5open_f(errcode)
+  !
+  ! Initialize the data array.
+  !
+  DO i = 1, DIM1
+     buf1(i) = i
+     buf2(i) = i
+     buf3(i) = i
+  END DO
 
-!
-! Create a new file using default properties.
-!
-CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
+  !
+  ! Initialize FORTRAN predefined datatypes.
+  !
+  CALL h5open_f(errcode)
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_INTEGER
-!-------------------------------------------------------------------------
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode)
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_INTEGER
+  !-------------------------------------------------------------------------
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode)
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, DIM1
- IF ( buf1(i) .NE. bufr1(i) ) THEN
-   PRINT *, 'read buffer differs from write buffer (I)'
-   PRINT *,  bufr1(i), ' and ',   buf1(i)
-   STOP
-  ENDIF
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, DIM1
+     IF ( buf1(i) .NE. bufr1(i) ) THEN
+        PRINT *, 'read buffer differs from write buffer (I)'
+        PRINT *,  bufr1(i), ' and ',   buf1(i)
+        STOP
+     ENDIF
+  END DO
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_REAL
-!-------------------------------------------------------------------------
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_REAL
+  !-------------------------------------------------------------------------
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode)
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode)
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, DIM1
- IF ( buf2(i) .NE. bufr2(i) ) THEN
-   PRINT *, 'read buffer differs from write buffer (R)'
-   PRINT *,  bufr2(i), ' and ',   buf2(i)
-   STOP
-  ENDIF
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, DIM1
+     IF ( buf2(i) .NE. bufr2(i) ) THEN
+        PRINT *, 'read buffer differs from write buffer (R)'
+        PRINT *,  bufr2(i), ' and ',   buf2(i)
+        STOP
+     ENDIF
+  END DO
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_DOUBLE
-!-------------------------------------------------------------------------
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_DOUBLE
+  !-------------------------------------------------------------------------
 
-!
-! write dataset.
-!
-f_ptr = C_LOC(buf3(1))
-mytype = h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND)
-CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, &
-     mytype, f_ptr, errcode)
-!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode)
-! h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND)
-!
-! read dataset.
-!
-f_ptr = C_LOC(bufr3(1))
-CALL h5ltread_dataset_f(file_id, dsetname3, &
-     h5kind_to_type(KIND(bufr3(1)), H5_REAL_KIND), f_ptr, errcode)
-!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode)
+  !
+  ! write dataset.
+  !
+  f_ptr = C_LOC(buf3(1))
+  mytype = h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND)
+  CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, &
+       mytype, f_ptr, errcode)
+  !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode)
+  ! h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND)
+  !
+  ! read dataset.
+  !
+  f_ptr = C_LOC(bufr3(1))
+  CALL h5ltread_dataset_f(file_id, dsetname3, &
+       h5kind_to_type(KIND(bufr3(1)), H5_REAL_KIND), f_ptr, errcode)
+  !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, DIM1
- IF ( buf3(i) .NE. bufr3(i) ) THEN
-   PRINT *, 'read buffer differs from write buffer (D)'
-   PRINT *,  bufr3(i), ' and ',   buf3(i)
-   STOP
-  ENDIF
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, DIM1
+     IF ( buf3(i) .NE. bufr3(i) ) THEN
+        PRINT *, 'read buffer differs from write buffer (D)'
+        PRINT *,  bufr3(i), ' and ',   buf3(i)
+        STOP
+     ENDIF
+  END DO
 
-!
-! Close the file.
-!
-CALL h5fclose_f(file_id, errcode)
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, errcode)
 
-!
-! Close FORTRAN predefined datatypes.
-!
-CALL h5close_f(errcode)
+  !
+  ! Close FORTRAN predefined datatypes.
+  !
+  CALL h5close_f(errcode)
 
-CALL passed()
-!
-! end function.
-!
+  CALL passed()
+  !
+  ! end function.
+  !
 END SUBROUTINE test_dataset1D
 
 !-------------------------------------------------------------------------
@@ -189,194 +188,193 @@ END SUBROUTINE test_dataset1D
 
 SUBROUTINE test_dataset2D()
 
-USE, INTRINSIC :: ISO_C_BINDING
-USE H5LT ! module of H5LT
-USE HDF5 ! module of HDF5 library
-
-IMPLICIT NONE
-
-
-INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4;             ! columns
-INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6;             ! rows
-CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name
-CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"   ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"   ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"   ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4"   ! Dataset name
-INTEGER(HID_T) :: file_id                            ! File identifier
-INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/)     ! Dataset dimensions
-INTEGER        :: rank = 2                           ! Dataset rank
-INTEGER, DIMENSION(DIM1*DIM2) :: buf                 ! Data buffer
-INTEGER, DIMENSION(DIM1*DIM2) :: bufr                ! Data buffer
-INTEGER, DIMENSION(DIM1,DIM2) :: buf2                ! Data buffer
-INTEGER, DIMENSION(DIM1,DIM2) :: buf2r               ! Data buffer
-REAL, DIMENSION(DIM1,DIM2), TARGET    :: buf3                ! Data buffer
-REAL, DIMENSION(DIM1,DIM2), TARGET    :: buf3r               ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4       ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4r      ! Data buffer
-INTEGER        :: errcode                            ! Error flag
-INTEGER(HSIZE_T) :: i, j, n                            ! general purpose integers
-TYPE(C_PTR) :: f_ptr
-
-CALL test_begin(' Make/Read datasets (2D)        ')
+  USE, INTRINSIC :: ISO_C_BINDING
+  USE H5LT ! module of H5LT
+  USE HDF5 ! module of HDF5 library
 
+  IMPLICIT NONE
 
-!
-! Initialize the data arrays.
-!
-n=1
-DO i = 1, DIM1*DIM2
-   buf(i) = INT(n)
-   n = n + 1
-END DO
 
-DO i = 1, dims(1)
- DO j = 1, dims(2)
-  buf2(i,j) = INT((i-1)*dims(2) + j)
-  buf3(i,j) = INT((i-1)*dims(2) + j)
-  buf4(i,j) = INT((i-1)*dims(2) + j)
- END DO
-END DO
+  INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4              ! columns
+  INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6              ! rows
+  CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name
+  CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"   ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"   ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"   ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4"   ! Dataset name
+  INTEGER(HID_T) :: file_id                            ! File identifier
+  INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/)     ! Dataset dimensions
+  INTEGER        :: rank = 2                           ! Dataset rank
+  INTEGER, DIMENSION(DIM1*DIM2) :: buf                 ! Data buffer
+  INTEGER, DIMENSION(DIM1*DIM2) :: bufr                ! Data buffer
+  INTEGER, DIMENSION(DIM1,DIM2) :: buf2                ! Data buffer
+  INTEGER, DIMENSION(DIM1,DIM2) :: buf2r               ! Data buffer
+  REAL, DIMENSION(DIM1,DIM2), TARGET    :: buf3                ! Data buffer
+  REAL, DIMENSION(DIM1,DIM2), TARGET    :: buf3r               ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4       ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4r      ! Data buffer
+  INTEGER        :: errcode                            ! Error flag
+  INTEGER(HSIZE_T) :: i, j, n                            ! general purpose integers
+  TYPE(C_PTR) :: f_ptr
 
+  CALL test_begin(' Make/Read datasets (2D)        ')
 
-!
-! Initialize FORTRAN predefined datatypes.
-!
-CALL h5open_f(errcode)
 
-!
-! Create a new file using default properties.
-!
-CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
+  !
+  ! Initialize the data arrays.
+  !
+  n=1
+  DO i = 1, DIM1*DIM2
+     buf(i) = INT(n)
+     n = n + 1
+  END DO
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_INT 1D buffer
-!-------------------------------------------------------------------------
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        buf2(i,j) = INT((i-1)*dims(2) + j)
+        buf3(i,j) = INT((i-1)*dims(2) + j)
+        buf4(i,j) = INT((i-1)*dims(2) + j)
+     END DO
+  END DO
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode)
+  !
+  ! Initialize FORTRAN predefined datatypes.
+  !
+  CALL h5open_f(errcode)
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode)
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, DIM1*DIM2
-  IF ( buf(i) .NE. bufr(i) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  bufr(i), ' and ',   buf(i)
-    STOP
-  ENDIF
-END DO
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_INT 1D buffer
+  !-------------------------------------------------------------------------
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_INT 2D buffer
-!-------------------------------------------------------------------------
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode)
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode)
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode)
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, DIM1*DIM2
+     IF ( buf(i) .NE. bufr(i) ) THEN
+        PRINT *, 'read buffer differs from write buffer'
+        PRINT *,  bufr(i), ' and ',   buf(i)
+        STOP
+     ENDIF
+  END DO
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
-  IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf2r(i,j), ' and ',   buf2(i,j)
-    STOP
-  ENDIF
- END DO
-END DO
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_INT 2D buffer
+  !-------------------------------------------------------------------------
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_REAL
-!-------------------------------------------------------------------------
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode)
 
-!
-! write dataset.
-!
-f_ptr = C_LOC(buf3(1,1))
-CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode)
-!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode)
 
-!
-! read dataset.
-!
-f_ptr = C_LOC(buf3r(1,1))
-CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode)
-!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode)
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN
+           PRINT *, 'read buffer differs from write buffer'
+           PRINT *,  buf2r(i,j), ' and ',   buf2(i,j)
+           STOP
+        ENDIF
+     END DO
+  END DO
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
-  IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf3r(i,j), ' and ',   buf3(i,j)
-    STOP
-  ENDIF
- END DO
-END DO
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_REAL
+  !-------------------------------------------------------------------------
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_DOUBLE
-!-------------------------------------------------------------------------
+  !
+  ! write dataset.
+  !
+  f_ptr = C_LOC(buf3(1,1))
+  CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode)
+  !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode)
 
-!
-! write dataset.
-!
-f_ptr = C_LOC(buf4(1,1))
-CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode)
-!CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode)
+  !
+  ! read dataset.
+  !
+  f_ptr = C_LOC(buf3r(1,1))
+  CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode)
+  !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode)
 
-!
-! read dataset.
-f_ptr = C_LOC(buf4r(1,1))
-CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode)
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN
+           PRINT *, 'read buffer differs from write buffer'
+           PRINT *,  buf3r(i,j), ' and ',   buf3(i,j)
+           STOP
+        ENDIF
+     END DO
+  END DO
 
-!CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode)
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_DOUBLE
+  !-------------------------------------------------------------------------
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
-  IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf4r(i,j), ' and ',   buf4(i,j)
-    STOP
-  ENDIF
- END DO
-END DO
+  !
+  ! write dataset.
+  !
+  f_ptr = C_LOC(buf4(1,1))
+  CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode)
+  !CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode)
 
-!
-! Close the file.
-!
-CALL h5fclose_f(file_id, errcode)
+  !
+  ! read dataset.
+  f_ptr = C_LOC(buf4r(1,1))
+  CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode)
 
-!
-! Close FORTRAN predefined datatypes.
-!
-CALL h5close_f(errcode)
+  !CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode)
 
-CALL passed()
-!
-! end function.
-!
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN
+           PRINT *, 'read buffer differs from write buffer'
+           PRINT *,  buf4r(i,j), ' and ',   buf4(i,j)
+           STOP
+        ENDIF
+     END DO
+  END DO
+
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, errcode)
+
+  !
+  ! Close FORTRAN predefined datatypes.
+  !
+  CALL h5close_f(errcode)
+
+  CALL passed()
+  !
+  ! end function.
+  !
 END SUBROUTINE test_dataset2D
 
 
@@ -386,215 +384,313 @@ END SUBROUTINE test_dataset2D
 
 
 SUBROUTINE test_dataset3D()
-USE, INTRINSIC :: ISO_C_BINDING
-USE H5LT ! module of H5LT
-USE HDF5 ! module of HDF5 library
-
-IMPLICIT NONE
-
-INTEGER, PARAMETER :: DIM1 = 6                             ! columns
-INTEGER, PARAMETER :: DIM2 = 4                             ! rows
-INTEGER, PARAMETER :: DIM3 = 2                             ! layers
-CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5"       ! File name
-CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"          ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"          ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"          ! Dataset name
-CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4"          ! Dataset name
-INTEGER(HID_T) :: file_id                                   ! File identifier
-INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions
-INTEGER(HSIZE_T), DIMENSION(3) :: dimsr                     ! Dataset dimensions
-INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf                   ! Data buffer
-INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr                  ! Data buffer
-INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2                  ! Data buffer
-INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r                 ! Data buffer
-REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET    :: buf3                  ! Data buffer
-REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET    :: buf3r                 ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4         ! Data buffer
-DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4r        ! Data buffer
-INTEGER        :: rank = 3                                  ! Dataset rank
-INTEGER        :: errcode                                   ! Error flag
-INTEGER(HSIZE_T) :: i, j, k, n                                ! general purpose integers
-INTEGER          :: type_class
-INTEGER(SIZE_T)  :: type_size
-TYPE(C_PTR) :: f_ptr
-CALL test_begin(' Make/Read datasets (3D)        ')
+  USE, INTRINSIC :: ISO_C_BINDING
+  USE H5LT ! module of H5LT
+  USE HDF5 ! module of HDF5 library
 
+  IMPLICIT NONE
 
-!
-! Initialize the data array.
-!
-n=1
-DO i = 1, DIM1*DIM2*DIM3
-   buf(i) = INT(n)
-   n = n + 1
-END DO
-
-n = 1
-DO i = 1, dims(1)
-   DO j = 1, dims(2)
-      DO k = 1, dims(3)
-         buf2(i,j,k) = INT(n)
-         buf3(i,j,k) = INT(n)
-         buf4(i,j,k) = INT(n)
-         n = n + 1
-      END DO
-   END DO
-END DO
+  INTEGER, PARAMETER :: DIM1 = 6                             ! columns
+  INTEGER, PARAMETER :: DIM2 = 4                             ! rows
+  INTEGER, PARAMETER :: DIM3 = 2                             ! layers
+  CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5"       ! File name
+  CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"          ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"          ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"          ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4"          ! Dataset name
+  INTEGER(HID_T) :: file_id                                   ! File identifier
+  INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions
+  INTEGER(HSIZE_T), DIMENSION(3) :: dimsr                     ! Dataset dimensions
+  INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf                   ! Data buffer
+  INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr                  ! Data buffer
+  INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2                  ! Data buffer
+  INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r                 ! Data buffer
+  REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET    :: buf3                  ! Data buffer
+  REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET    :: buf3r                 ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4         ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4r        ! Data buffer
+  INTEGER        :: rank = 3                                  ! Dataset rank
+  INTEGER        :: errcode                                   ! Error flag
+  INTEGER(HSIZE_T) :: i, j, k, n                                ! general purpose integers
+  INTEGER          :: type_class
+  INTEGER(SIZE_T)  :: type_size
+  TYPE(C_PTR) :: f_ptr
+#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0
+  INTEGER, PARAMETER :: int_kind_32 = SELECTED_INT_KIND(36) !should map to INTEGER*16 on most modern processors
+  INTEGER(int_kind_32), DIMENSION(DIM1,DIM2,DIM3), TARGET :: dset_data_i32, data_out_i32
+  INTEGER(HID_T) :: dset_id32     ! Dataset identifier
+  CHARACTER(LEN=7), PARAMETER :: dsetname16a = "dset16a"     ! Dataset name
+  CHARACTER(LEN=7), PARAMETER :: dsetname16b = "dset16b"     ! Dataset name
+  CHARACTER(LEN=7), PARAMETER :: dsetname16c = "dset16c"     ! Dataset name
+  INTEGER(HID_T) :: type_id
+#endif
 
-!
-! Initialize FORTRAN predefined datatypes.
-!
-CALL h5open_f(errcode)
+  CALL test_begin(' Make/Read datasets (3D)        ')
 
-!
-! Create a new file using default properties.
-!
-CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_INT 1D buffer
-!-------------------------------------------------------------------------
+  !
+  ! Initialize the data array.
+  !
+  n=1
+  DO i = 1, DIM1*DIM2*DIM3
+     buf(i) = INT(n)
+     n = n + 1
+  END DO
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode)
+  n = 1
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           buf2(i,j,k) = INT(n)
+           buf3(i,j,k) = INT(n)
+           buf4(i,j,k) = INT(n)
+#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0
+           dset_data_i32(i,j,k) = HUGE(1_int_kind_32)-INT(n,int_kind_32)
+#endif
+           n = n + 1
+        END DO
+     END DO
+  END DO
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode)
+  !
+  ! Initialize FORTRAN predefined datatypes.
+  !
+  CALL h5open_f(errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, DIM1*DIM2*DIM3
-  IF ( buf(i) .NE. bufr(i) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  bufr(i), ' and ',   buf(i)
-    STOP
-  ENDIF
-END DO
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode)
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_INT 3D buffer
-!-------------------------------------------------------------------------
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_INT 1D buffer
+  !-------------------------------------------------------------------------
 
-!
-! write dataset.
-!
-CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode)
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode)
 
-!
-! read dataset.
-!
-CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
- DO k = 1, dims(3)
-  IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf2r(i,j,k), ' and ',   buf2(i,j,k)
-    STOP
-  ENDIF
- END DO
- END DO
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, DIM1*DIM2*DIM3
+     IF ( buf(i) .NE. bufr(i) ) THEN
+        PRINT *, 'read buffer differs from write buffer'
+        PRINT *,  bufr(i), ' and ',   buf(i)
+        STOP
+     ENDIF
+  END DO
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_REAL
-!-------------------------------------------------------------------------
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_INT 3D buffer
+  !-------------------------------------------------------------------------
 
-!
-! write dataset.
-!
-f_ptr = C_LOC(buf3(1,1,1))
-CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode)
-!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode)
+  !
+  ! write dataset.
+  !
+  CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode)
 
-!
-! read dataset.
-!
-f_ptr = C_LOC(buf3r(1,1,1))
-CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode)
-!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode)
+  !
+  ! read dataset.
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
- DO k = 1, dims(3)
-  IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf3r(i,j,k), ' and ',   buf3(i,j,k)
-    STOP
-  ENDIF
- END DO
- END DO
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  buf2r(i,j,k), ' and ',   buf2(i,j,k)
+              STOP
+           ENDIF
+        END DO
+     END DO
+  END DO
 
-!-------------------------------------------------------------------------
-! H5T_NATIVE_DOUBLE
-!-------------------------------------------------------------------------
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_REAL
+  !-------------------------------------------------------------------------
 
-!
-! write dataset.
-!
-f_ptr = C_LOC(buf4(1,1,1))
-CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode)
+  !
+  ! write dataset.
+  !
+  f_ptr = C_LOC(buf3(1,1,1))
+  CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode)
+  !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode)
 
-!
-! read dataset.
-!
-f_ptr = C_LOC(buf4r(1,1,1))
-CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode)
+  !
+  ! read dataset.
+  !
+  f_ptr = C_LOC(buf3r(1,1,1))
+  CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode)
+  !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode)
 
-!
-! compare read and write buffers.
-!
-DO i = 1, dims(1)
- DO j = 1, dims(2)
- DO k = 1, dims(3)
-  IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN
-    PRINT *, 'read buffer differs from write buffer'
-    PRINT *,  buf4r(i,j,k), ' and ',   buf4(i,j,k)
-    STOP
-  ENDIF
- END DO
- END DO
-END DO
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  buf3r(i,j,k), ' and ',   buf3(i,j,k)
+              STOP
+           ENDIF
+        END DO
+     END DO
+  END DO
 
-CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode )
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_DOUBLE
+  !-------------------------------------------------------------------------
 
-!
-! compare dimensions
-!
-DO i = 1, rank
- IF ( dimsr(i) .NE. dims(i) ) THEN
-   PRINT *, 'dimensions differ '
-   STOP
-  ENDIF
-END DO
+  !
+  ! write dataset.
+  !
+  f_ptr = C_LOC(buf4(1,1,1))
+  CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode)
 
-!
-! Close the file.
-!
-CALL h5fclose_f(file_id, errcode)
+  !
+  ! read dataset.
+  !
+  f_ptr = C_LOC(buf4r(1,1,1))
+  CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode)
 
-!
-! Close FORTRAN predefined datatypes.
-!
-CALL h5close_f(errcode)
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  buf4r(i,j,k), ' and ',   buf4(i,j,k)
+              STOP
+           ENDIF
+        END DO
+     END DO
+  END DO
 
-CALL passed()
-!
-! end function.
-!
+  CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode )
+
+  !
+  ! compare dimensions
+  !
+  DO i = 1, rank
+     IF ( dimsr(i) .NE. dims(i) ) THEN
+        PRINT *, 'dimensions differ '
+        STOP
+     ENDIF
+  END DO
+
+  !-------------------------------------------------------------------------
+  ! CHECKING NON-NATIVE INTEGER TYPES
+  !-------------------------------------------------------------------------
+
+#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0
+  ! (A) CHECKING INTEGER*16
+  !
+  !    (i.a) write dataset using F2003 interface
+  !
+  type_id = H5kind_to_type(KIND(dset_data_i32(1,1,1)), H5_INTEGER_KIND)
+  f_ptr = C_LOC(dset_data_i32(1,1,1))
+  CALL h5ltmake_dataset_f(file_id, dsetname16a, rank, dims, type_id, f_ptr, errcode)
+  !
+  !    (i.b) read dataset using F2003 interface
+  !
+  f_ptr = C_LOC(data_out_i32(1,1,1))
+  CALL h5ltread_dataset_f(file_id, dsetname16a, type_id, f_ptr, errcode)
+
+  !
+  !        compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) 
+              STOP
+           ENDIF
+        END DO
+     END DO
+  ENDDO
+
+  !
+  !    (ii.a) write dataset using F90 interface
+  !
+  type_id = H5kind_to_type(KIND(dset_data_i32(1,1,1)), H5_INTEGER_KIND)
+  CALL h5ltmake_dataset_f(file_id, dsetname16b, rank, dims, type_id, dset_data_i32, errcode)
+  !
+  !    (ii.b) read dataset using F90 interface
+  !
+  CALL h5ltread_dataset_f(file_id, dsetname16b, type_id, data_out_i32, dims, errcode)
+
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) 
+              STOP
+           ENDIF
+        END DO
+     END DO
+  ENDDO
+
+  !
+  !     (iii.a) write dataset using F90 H5LTmake_dataset_int_f interface
+  !
+  CALL h5ltmake_dataset_int_f(file_id, dsetname16c, rank, dims, dset_data_i32, errcode)
+
+  !
+  !     (iii.b) read dataset using F90 H5LTmake_dataset_int_f interface
+  !
+  CALL h5ltread_dataset_int_f(file_id, dsetname16c, data_out_i32, dims, errcode)
+
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN
+              PRINT *, 'read buffer differs from write buffer'
+              PRINT *,  dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) 
+              STOP
+           ENDIF
+        END DO
+     END DO
+  ENDDO
+
+#endif
+
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, errcode)
+
+  !
+  ! Close FORTRAN predefined datatypes.
+  !
+  CALL h5close_f(errcode)
+
+  CALL passed()
+  !
+  ! end function.
+  !
 END SUBROUTINE test_dataset3D
 
 !-------------------------------------------------------------------------
@@ -623,6 +719,7 @@ SUBROUTINE test_datasetND(rank)
   CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"          ! Dataset name
   CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"          ! Dataset name
   CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4"          ! Dataset name
+  CHARACTER(LEN=5), PARAMETER :: dsetname5 = "dset5"          ! Dataset name
   INTEGER(HID_T) :: file_id                                   ! File identifier
   INTEGER(HSIZE_T), DIMENSION(7) :: dims
   INTEGER(HSIZE_T), DIMENSION(7) :: dimsr                       ! Dataset dimensions
@@ -650,29 +747,41 @@ SUBROUTINE test_datasetND(rank)
   DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: dbufr_6        ! Data buffer
   DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbuf_7       ! Data buffer
   DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbufr_7      ! Data buffer
-  INTEGER        :: errcode                                   ! Error flag
-  INTEGER(HSIZE_T)        :: i, j, k, l, m, n, o, nn                   ! general purpose integers
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: cbuf_4            ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: cbufr_4           ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: cbuf_5          ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: cbufr_5         ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: cbuf_6        ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: cbufr_6       ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: cbuf_7      ! Data buffer
+  CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: cbufr_7     ! Data buffer
+  INTEGER        :: errcode                            ! Error flag
+  INTEGER(HSIZE_T) :: i, j, k, l, m, n, o, nn   ! general purpose integers
   INTEGER          :: type_class
   INTEGER(SIZE_T)  :: type_size
   CHARACTER(LEN=1) :: ichr1
+  CHARACTER(LEN=3) :: ichr3
   TYPE(C_PTR) :: f_ptr
+  INTEGER(HID_T) :: type_id
 
   WRITE(ichr1,'(I1.1)') rank
   CALL test_begin(' Make/Read datasets ('//ichr1//'D)        ')
-!
-! Initialize the data array.
-!
+  !
+  ! Initialize the data array.
+  !
   IF(rank.EQ.4)THEN
-     
+
      ALLOCATE(ibuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4))
      ALLOCATE(ibufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4))
      ALLOCATE(rbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4))
      ALLOCATE(rbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4))
      ALLOCATE(dbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4))
      ALLOCATE(dbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4))
+     ALLOCATE(cbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4))
+     ALLOCATE(cbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4))
 
      dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,0,0,0/)
-     
+
      nn = 1
      DO i = 1, DIM1
         DO j = 1, DIM2
@@ -681,12 +790,14 @@ SUBROUTINE test_datasetND(rank)
                  ibuf_4(i,j,k,l) = INT(nn)
                  rbuf_4(i,j,k,l) = INT(nn)
                  dbuf_4(i,j,k,l) = INT(nn)
+                 WRITE(cbuf_4(i,j,k,l),'(I5.5)') nn
                  nn = nn + 1
               END DO
            END DO
         END DO
+
      ENDDO
-     
+
   ELSE IF(rank.EQ.5)THEN
 
      ALLOCATE(ibuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
@@ -695,9 +806,11 @@ SUBROUTINE test_datasetND(rank)
      ALLOCATE(rbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
      ALLOCATE(dbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
      ALLOCATE(dbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
+     ALLOCATE(cbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
+     ALLOCATE(cbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5))
 
      dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,0,0/)
-     
+
      nn = 1
      DO i = 1, DIM1
         DO j = 1, DIM2
@@ -707,6 +820,7 @@ SUBROUTINE test_datasetND(rank)
                     ibuf_5(i,j,k,l,m) = INT(nn)
                     rbuf_5(i,j,k,l,m) = INT(nn)
                     dbuf_5(i,j,k,l,m) = INT(nn)
+                    WRITE(cbuf_5(i,j,k,l,m),'(I5.5)') nn
                     nn = nn + 1
                  END DO
               END DO
@@ -722,9 +836,11 @@ SUBROUTINE test_datasetND(rank)
      ALLOCATE(rbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6))
      ALLOCATE(dbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6))
      ALLOCATE(dbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6))
+     ALLOCATE(cbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6))
+     ALLOCATE(cbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6))
 
      dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,0/)
-     
+
      nn = 1
      DO i = 1, DIM1
         DO j = 1, DIM2
@@ -735,6 +851,7 @@ SUBROUTINE test_datasetND(rank)
                        ibuf_6(i,j,k,l,m,n) = INT(nn)
                        rbuf_6(i,j,k,l,m,n) = INT(nn)
                        dbuf_6(i,j,k,l,m,n) = INT(nn)
+                       WRITE(cbuf_6(i,j,k,l,m,n),'(I5.5)') nn
                        nn = nn + 1
                     END DO
                  END DO
@@ -742,18 +859,20 @@ SUBROUTINE test_datasetND(rank)
            ENDDO
         ENDDO
      ENDDO
-     
+
   ELSE IF(rank.EQ.7)THEN
-     
+
      ALLOCATE(ibuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
      ALLOCATE(ibufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
      ALLOCATE(rbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
      ALLOCATE(rbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
      ALLOCATE(dbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
      ALLOCATE(dbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
+     ALLOCATE(cbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
+     ALLOCATE(cbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7))
 
      dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,DIM7/)
-     
+
      nn = 1
      DO i = 1, DIM1
         DO j = 1, DIM2
@@ -765,6 +884,7 @@ SUBROUTINE test_datasetND(rank)
                           ibuf_7(i,j,k,l,m,n,o) = INT(nn)
                           rbuf_7(i,j,k,l,m,n,o) = INT(nn)
                           dbuf_7(i,j,k,l,m,n,o) = INT(nn)
+                          WRITE(cbuf_7(i,j,k,l,m,n,o),'(I5.5)') nn
                           nn = nn + 1
                        END DO
                     END DO
@@ -803,7 +923,7 @@ SUBROUTINE test_datasetND(rank)
   ELSE IF(rank.EQ.7)THEN
      CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_7, errcode)
   ENDIF
-     
+
 
   !
   ! read dataset.
@@ -874,7 +994,7 @@ SUBROUTINE test_datasetND(rank)
   IF(rank.EQ.4)THEN
      f_ptr = C_LOC(rbuf_4(1,1,1,1))
      CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode)
-    ! CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode)
+     ! CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode)
   ELSE IF(rank.EQ.5)THEN
      f_ptr = C_LOC(rbuf_5(1,1,1,1,1))
      CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode)
@@ -887,7 +1007,7 @@ SUBROUTINE test_datasetND(rank)
      CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode)
      !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_7, errcode)
   ENDIF
-     
+
 
   !
   ! read dataset.
@@ -972,7 +1092,6 @@ SUBROUTINE test_datasetND(rank)
      f_ptr = C_LOC(dbuf_7(1,1,1,1,1,1,1))
      CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode)
   ENDIF
-     
 
   !
   ! read dataset.
@@ -1037,8 +1156,97 @@ SUBROUTINE test_datasetND(rank)
      ENDDO
   ENDDO
 
+  !-------------------------------------------------------------------------
+  ! H5T_NATIVE_CHARACTER ND buffer
+  !-------------------------------------------------------------------------
+
+  CALL H5Tcopy_f(H5T_FORTRAN_S1, type_id, errcode)
+  CALL H5Tset_size_f(type_id, 5_SIZE_T, errcode)
+  !
+  ! write dataset.
+  !
+  IF(rank.EQ.4)THEN
+     f_ptr = C_LOC(cbuf_4(1,1,1,1)(1:1))
+     CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.5)THEN
+     f_ptr = C_LOC(cbuf_5(1,1,1,1,1)(1:1))
+     CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.6)THEN
+     f_ptr = C_LOC(cbuf_6(1,1,1,1,1,1)(1:1))
+     CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.7)THEN
+     f_ptr = C_LOC(cbuf_7(1,1,1,1,1,1,1)(1:1))
+     CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode)
+  ENDIF
+
+  !
+  ! read dataset.
+  !
+  IF(rank.EQ.4)THEN
+     f_ptr = C_LOC(cbufr_4(1,1,1,1)(1:1))
+     CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.5)THEN
+     f_ptr = C_LOC(cbufr_5(1,1,1,1,1)(1:1))
+     CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.6)THEN
+     f_ptr = C_LOC(cbufr_6(1,1,1,1,1,1)(1:1))
+     CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode)
+  ELSE IF(rank.EQ.7)THEN
+     f_ptr = C_LOC(cbufr_7(1,1,1,1,1,1,1)(1:1))
+     CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode)
+  ENDIF
+
+
+  !
+  ! compare read and write buffers.
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        DO k = 1, dims(3)
+           DO l = 1, dims(4)
+              IF(rank.EQ.4)THEN
+                 IF ( cbuf_4(i,j,k,l) .NE. cbufr_4(i,j,k,l) ) THEN
+                    PRINT *, 'read buffer differs from write buffer (character)'
+                    PRINT *,  cbuf_4(i,j,k,l), ' and ', cbufr_4(i,j,k,l)
+                    STOP
+                 ENDIF
+              ENDIF
+              DO m = 1, dims(5)
+                 IF(rank.EQ.5)THEN
+                    IF ( cbuf_5(i,j,k,l,m) .NE. cbufr_5(i,j,k,l,m) ) THEN
+                       PRINT *, 'read buffer differs from write buffer (character)'
+                       PRINT *,  cbuf_5(i,j,k,l,m), ' and ', cbufr_5(i,j,k,l,m)
+                       STOP
+                    ENDIF
+                 ENDIF
+                 DO n = 1, dims(6)
+                    IF(rank.EQ.6)THEN
+                       IF ( cbuf_6(i,j,k,l,m,n) .NE. cbufr_6(i,j,k,l,m,n) ) THEN
+                          PRINT *, 'read buffer differs from write buffer (character)'
+                          PRINT *,  cbuf_6(i,j,k,l,m,n), ' and ', cbufr_6(i,j,k,l,m,n)
+                          STOP
+                       ENDIF
+                    ENDIF
+                    DO o = 1, dims(7)
+                       IF(rank.EQ.7)THEN
+                          IF ( cbuf_7(i,j,k,l,m,n,o) .NE. cbufr_7(i,j,k,l,m,n,o) ) THEN
+                             PRINT *, 'read buffer differs from write buffer (character)'
+                             PRINT *,  cbuf_7(i,j,k,l,m,n,o), ' and ', cbufr_7(i,j,k,l,m,n,o)
+                             STOP
+                          ENDIF
+                       ENDIF
+                    ENDDO
+                 ENDDO
+              ENDDO
+           ENDDO
+        ENDDO
+     ENDDO
+  ENDDO
+
   CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode )
 
+  CALL h5tclose_f(type_id,errcode)
+
   !
   ! compare dimensions
   !
@@ -1062,13 +1270,13 @@ SUBROUTINE test_datasetND(rank)
   ! DEALLOCATE RESOURCES
 
   IF(rank.EQ.4)THEN
-     DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4)
+     DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4, cbuf_4, cbufr_4)
   ELSE IF(rank.EQ.5)THEN
-     DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5)
+     DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5, cbuf_5, cbufr_5)
   ELSE IF(rank.EQ.6)THEN
-     DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6)
+     DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6, cbuf_6, cbufr_6)
   ELSE IF(rank.EQ.7)THEN
-     DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7)
+     DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7, cbuf_7, cbufr_7)
   ENDIF
 
   CALL passed()
@@ -1078,7 +1286,6 @@ SUBROUTINE test_datasetND(rank)
 END SUBROUTINE test_datasetND
 
 
-
 !-------------------------------------------------------------------------
 ! test_datasets
 !-------------------------------------------------------------------------
@@ -1094,7 +1301,7 @@ SUBROUTINE test_datasets()
   CHARACTER(len=9), PARAMETER :: filename = "dsetf4.h5"! File name
   INTEGER(HID_T) :: file_id                            ! File identifier
   INTEGER        :: errcode                            ! Error flag
-  INTEGER, PARAMETER :: DIM1 = 10                     ! Dimension of array
+  INTEGER, PARAMETER :: DIM1 = 10                      ! Dimension of array
   CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1"   ! Dataset name
   CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2"   ! Dataset name
   CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3"   ! Dataset name
@@ -1108,10 +1315,10 @@ SUBROUTINE test_datasets()
   CHARACTER(LEN=8)            :: buf1r                 ! Data buffer
   INTEGER, DIMENSION(DIM1)          :: buf2            ! Data buffer
   INTEGER, DIMENSION(DIM1)          :: bufr2           ! Data buffer
-  REAL, DIMENSION(DIM1), TARGET             :: buf3            ! Data buffer
-  REAL, DIMENSION(DIM1) , TARGET            :: bufr3           ! Data buffer
-  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4            ! Data buffer
-  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4           ! Data buffer
+  REAL, DIMENSION(DIM1), TARGET             :: buf3    ! Data buffer
+  REAL, DIMENSION(DIM1) , TARGET            :: bufr3   ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4    ! Data buffer
+  DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4   ! Data buffer
   INTEGER          :: i, n                             ! general purpose integer
   INTEGER          :: has                              ! general purpose integer
   INTEGER          :: type_class
@@ -1289,7 +1496,7 @@ SUBROUTINE test_datasets()
   IF(errcode.LT.0.OR..NOT.path_valid)THEN
      PRINT *, 'error in h5ltpath_valid_f'
      STOP
-  ENDIF 
+  ENDIF
 
   ! Should fail, dataset does not exist
   CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .TRUE., path_valid, errcode)
@@ -1306,14 +1513,14 @@ SUBROUTINE test_datasets()
 
   ! Create a dangling soft link
   CALL h5lcreate_soft_f("/G2", file_id, "/G3", errcode)
-  
+
   ! Should pass, does not check for dangled link
   CALL h5ltpath_valid_f(file_id, "/G3", .FALSE., path_valid, errcode)
   IF(.NOT.path_valid)THEN
      PRINT *, 'error in h5ltpath_valid_f'
      STOP
   ENDIF
-     
+
   ! Should fail, dangled link
   CALL h5ltpath_valid_f(file_id, "/G2", .TRUE., path_valid, errcode)
   IF(path_valid)THEN
@@ -1336,7 +1543,6 @@ SUBROUTINE test_datasets()
      STOP
   ENDIF
 
-
   !-------------------------------------------------------------------------
   ! test h5ltfind_dataset_f function
   !-------------------------------------------------------------------------
@@ -1352,7 +1558,6 @@ SUBROUTINE test_datasets()
   ! test h5ltget_dataset_info_f function
   !-------------------------------------------------------------------------
 
-
   CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode )
 
   !
@@ -1402,7 +1607,7 @@ SUBROUTINE test_attributes()
   CHARACTER(len=9), PARAMETER :: filename = "dsetf5.h5"! File name
   CHARACTER(len=9), PARAMETER :: filename1 ="tattr.h5" ! C written attribute file
   INTEGER(HID_T) :: file_id                            ! File identifier
-!  INTEGER(HID_T) :: file_id1
+  !  INTEGER(HID_T) :: file_id1
   INTEGER, PARAMETER :: DIM1 = 10                     ! Dimension of array
   CHARACTER(LEN=5), PARAMETER :: attrname1 = "attr1"   ! Attribute name
   CHARACTER(LEN=5), PARAMETER :: attrname2 = "attr2"   ! Attribute name
@@ -1413,8 +1618,8 @@ SUBROUTINE test_attributes()
   CHARACTER(LEN=16), PARAMETER :: buf_c = "string attribute"
   CHARACTER(LEN=8)                  :: bufr1           ! Data buffer
   CHARACTER(LEN=10)                 :: bufr1_lg        ! Data buffer
-!  CHARACTER(LEN=16)                 :: bufr_c          ! Data buffer
-!  CHARACTER(LEN=18)                 :: bufr_c_lg       ! Data buffer
+  !  CHARACTER(LEN=16)                 :: bufr_c          ! Data buffer
+  !  CHARACTER(LEN=18)                 :: bufr_c_lg       ! Data buffer
   INTEGER, DIMENSION(DIM1)          :: buf2            ! Data buffer
   INTEGER, DIMENSION(DIM1)          :: bufr2           ! Data buffer
   REAL, DIMENSION(DIM1), target     :: buf3            ! Data buffer
@@ -1547,41 +1752,41 @@ SUBROUTINE test_attributes()
 
   IF(SizeOf_buf_type.LT.16)THEN ! MSB can't handle 16 byte reals
 
-  CALL test_begin(' Set/Get attributes double      ')
+     CALL test_begin(' Set/Get attributes double      ')
 
-  !
-  ! write attribute.
-  !
-  f_ptr = C_LOC(buf4(1))
-  CALL h5ltset_attribute_f(file_id,dsetname1,attrname4,f_ptr,"real", SizeOf_buf_type, size, errcode)
+     !
+     ! write attribute.
+     !
+     f_ptr = C_LOC(buf4(1))
+     CALL h5ltset_attribute_f(file_id,dsetname1,attrname4,f_ptr,"real", SizeOf_buf_type, size, errcode)
 
-!  CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4, size, errcode)
+     !  CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4, size, errcode)
 
-  !
-  ! read attribute.
-  !
+     !
+     ! read attribute.
+     !
 
 #ifdef H5_FORTRAN_HAVE_STORAGE_SIZE
-  SizeOf_buf_type = STORAGE_SIZE(bufr4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)
+     SizeOf_buf_type = STORAGE_SIZE(bufr4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)
 #else
-  SizeOf_buf_type = SIZEOF(bufr4(1))
+     SizeOf_buf_type = SIZEOF(bufr4(1))
 #endif
 
-  f_ptr = C_LOC(bufr4(1))
-  CALL h5ltget_attribute_f(file_id,dsetname1,attrname4,f_ptr,"REAL",SizeOf_buf_type,errcode)
+     f_ptr = C_LOC(bufr4(1))
+     CALL h5ltget_attribute_f(file_id,dsetname1,attrname4,f_ptr,"REAL",SizeOf_buf_type,errcode)
 
-  !
-  ! compare read and write buffers.
-  !
-  DO i = 1, DIM1
-     IF ( buf4(i) .NE. bufr4(i) ) THEN
-        PRINT *, 'read buffer differs from write buffer'
-        PRINT *,  bufr4(i), ' and ',   buf4(i)
-        STOP
-     ENDIF
-  END DO
-
-  CALL passed()
+     !
+     ! compare read and write buffers.
+     !
+     DO i = 1, DIM1
+        IF ( buf4(i) .NE. bufr4(i) ) THEN
+           PRINT *, 'read buffer differs from write buffer'
+           PRINT *,  bufr4(i), ' and ',   buf4(i)
+           STOP
+        ENDIF
+     END DO
+
+     CALL passed()
 
   ENDIF