diff options
Diffstat (limited to 'hl/fortran')
| -rw-r--r-- | hl/fortran/src/CMakeLists.txt | 13 | ||||
| -rw-r--r-- | hl/fortran/src/H5HL_buildiface.F90 | 179 | ||||
| -rw-r--r-- | hl/fortran/src/H5LTff.F90 | 34 | ||||
| -rw-r--r-- | hl/fortran/src/Makefile.in | 1521 | ||||
| -rw-r--r-- | hl/fortran/test/tstlite.F90 | 1273 |
5 files changed, 2440 insertions, 580 deletions
diff --git a/hl/fortran/src/CMakeLists.txt b/hl/fortran/src/CMakeLists.txt index 20b1b28..83a205f 100644 --- a/hl/fortran/src/CMakeLists.txt +++ b/hl/fortran/src/CMakeLists.txt @@ -36,13 +36,18 @@ set_target_properties (H5HL_buildiface PROPERTIES Fortran_MODULE_DIRECTORY ${CMAKE_Fortran_MODULE_DIRECTORY} ) -if (NOT SKIP_HDF5_FORTRAN_SHARED) +if (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED) if (WIN32) - set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static/\${BUILD_TYPE}) + set (MODSH_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared/\${BUILD_TYPE}) else (WIN32) - set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static) + set (MODSH_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/shared) endif (WIN32) -endif (NOT SKIP_HDF5_FORTRAN_SHARED) +endif (BUILD_SHARED_LIBS AND NOT SKIP_HDF5_FORTRAN_SHARED) +if (WIN32) + set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static/\${BUILD_TYPE}) +else (WIN32) + set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static) +endif (WIN32) if (WIN32) set (MOD_BUILD_DIR ${CMAKE_Fortran_MODULE_DIRECTORY}/static/\${BUILD_TYPE}) else (WIN32) diff --git a/hl/fortran/src/H5HL_buildiface.F90 b/hl/fortran/src/H5HL_buildiface.F90 index 0e85e27..9dd879c 100644 --- a/hl/fortran/src/H5HL_buildiface.F90 +++ b/hl/fortran/src/H5HL_buildiface.F90 @@ -83,13 +83,13 @@ PROGRAM H5HL_buildiface /) ! pointer to the buffer CHARACTER(LEN=37), DIMENSION(1:8), PARAMETER :: f_ptr_line=(/ & - ' f_ptr = C_LOC(buf) ', & - ' f_ptr = C_LOC(buf(1)) ', & - ' f_ptr = C_LOC(buf(1,1)) ', & - ' f_ptr = C_LOC(buf(1,1,1)) ', & - ' f_ptr = C_LOC(buf(1,1,1,1)) ', & - ' f_ptr = C_LOC(buf(1,1,1,1,1)) ', & - ' f_ptr = C_LOC(buf(1,1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf )', & + ' f_ptr = C_LOC(buf(1) )', & + ' f_ptr = C_LOC(buf(1,1) )', & + ' f_ptr = C_LOC(buf(1,1,1) )', & + ' f_ptr = C_LOC(buf(1,1,1,1) )', & + ' f_ptr = C_LOC(buf(1,1,1,1,1) )', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1) )', & ' f_ptr = C_LOC(buf(1,1,1,1,1,1,1))' & /) @@ -154,6 +154,13 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) ENDDO END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_integer_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO WRITE(11,'(A)') " END INTERFACE" ! h5ltread_dataset_f @@ -165,6 +172,35 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) ENDDO END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_integer_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltread_dataset_int_f + WRITE(11,'(A)') " INTERFACE h5ltread_dataset_int_f" + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_int_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltmake_dataset_int_f + WRITE(11,'(A)') " INTERFACE h5ltmake_dataset_int_f" + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_int_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO WRITE(11,'(A)') " END INTERFACE" ! h5ltmake_dataset_float_f @@ -346,7 +382,6 @@ PROGRAM H5HL_buildiface k = rkind(i) WRITE(chr2,'(I2)') k DO j = 1, 8 - ! DLL definitions for windows WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) @@ -402,6 +437,134 @@ PROGRAM H5HL_buildiface ENDDO ENDDO +! h5ltmake_dataset_f + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,type_id,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(IN) :: rank' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: type_id' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id, namelen, dset_name, rank, dims, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltmake_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltmake_dataset_int_f + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(IN) :: rank' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(hid_t) :: type_id' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' type_id = h5kind_to_type(KIND('//f_ptr_line(j)(19:36)//'), H5_INTEGER_KIND)' + WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id, namelen, dset_name, rank, dims, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltmake_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltread_dataset_f + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name, type_id, buf,dims,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: type_id' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id, namelen, dset_name, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltread_dataset_integer_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltread_dataset_int_f + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name, buf,dims,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(hid_t) :: type_id' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' type_id = h5kind_to_type(KIND('//f_ptr_line(j)(19:36)//'), H5_INTEGER_KIND)' + WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id, namelen, dset_name, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltread_dataset_int_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + WRITE(11,'(A)') 'END MODULE H5LT' ! change this to be generic MSB CLOSE(11) diff --git a/hl/fortran/src/H5LTff.F90 b/hl/fortran/src/H5LTff.F90 index ffc7ab5..d36d92c 100644 --- a/hl/fortran/src/H5LTff.F90 +++ b/hl/fortran/src/H5LTff.F90 @@ -38,47 +38,13 @@ MODULE H5LT_CONST USE hdf5 INTERFACE h5ltmake_dataset_f - MODULE PROCEDURE h5ltmake_dataset_f_int1 - MODULE PROCEDURE h5ltmake_dataset_f_int2 - MODULE PROCEDURE h5ltmake_dataset_f_int3 - MODULE PROCEDURE h5ltmake_dataset_f_int4 - MODULE PROCEDURE h5ltmake_dataset_f_int5 - MODULE PROCEDURE h5ltmake_dataset_f_int6 - MODULE PROCEDURE h5ltmake_dataset_f_int7 MODULE PROCEDURE h5ltmake_dataset_f_ptr END INTERFACE INTERFACE h5ltread_dataset_f - MODULE PROCEDURE h5ltread_dataset_f_int1 - MODULE PROCEDURE h5ltread_dataset_f_int2 - MODULE PROCEDURE h5ltread_dataset_f_int3 - MODULE PROCEDURE h5ltread_dataset_f_int4 - MODULE PROCEDURE h5ltread_dataset_f_int5 - MODULE PROCEDURE h5ltread_dataset_f_int6 - MODULE PROCEDURE h5ltread_dataset_f_int7 MODULE PROCEDURE h5ltread_dataset_f_ptr END INTERFACE - INTERFACE h5ltmake_dataset_int_f - MODULE PROCEDURE h5ltmake_dataset_int_f_1 - MODULE PROCEDURE h5ltmake_dataset_int_f_2 - MODULE PROCEDURE h5ltmake_dataset_int_f_3 - MODULE PROCEDURE h5ltmake_dataset_int_f_4 - MODULE PROCEDURE h5ltmake_dataset_int_f_5 - MODULE PROCEDURE h5ltmake_dataset_int_f_6 - MODULE PROCEDURE h5ltmake_dataset_int_f_7 - END INTERFACE - - INTERFACE h5ltread_dataset_int_f - MODULE PROCEDURE h5ltread_dataset_int_f_1 - MODULE PROCEDURE h5ltread_dataset_int_f_2 - MODULE PROCEDURE h5ltread_dataset_int_f_3 - MODULE PROCEDURE h5ltread_dataset_int_f_4 - MODULE PROCEDURE h5ltread_dataset_int_f_5 - MODULE PROCEDURE h5ltread_dataset_int_f_6 - MODULE PROCEDURE h5ltread_dataset_int_f_7 - END INTERFACE - INTERFACE INTEGER FUNCTION h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) & BIND(C,NAME='h5ltmake_dataset_c') diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in new file mode 100644 index 0000000..4f0496c --- /dev/null +++ b/hl/fortran/src/Makefile.in @@ -0,0 +1,1521 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# +# HDF5 High-Level Fortran Makefile(.in) + +# Makefile.am include fragment with Fortran helper rules and macros. + +# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used. + + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(top_srcdir)/config/commence.am \ + $(top_srcdir)/config/lt_vers.am \ + $(top_srcdir)/config/conclude_fc.am \ + $(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \ + $(srcdir)/Makefile.am $(top_srcdir)/bin/depcomp \ + $(top_srcdir)/bin/test-driver + +# Some Fortran compilers can't build shared libraries, so sometimes we +# want to build a shared C library and a static Fortran library. If so, +# pass the -static flag to the library linker. +@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static +noinst_PROGRAMS = H5HL_buildiface$(EXEEXT) +TESTS = +subdir = hl/fortran/src +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ + $(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libhdf5hl_fortran_la_DEPENDENCIES = $(LIBH5_HL) $(LIBH5F) +am_libhdf5hl_fortran_la_OBJECTS = H5DSfc.lo H5LTfc.lo H5IMfc.lo \ + H5IMcc.lo H5TBfc.lo H5DSff.lo H5LTff.lo H5TBff.lo H5IMff.lo \ + H5LTff_gen.lo H5TBff_gen.lo +libhdf5hl_fortran_la_OBJECTS = $(am_libhdf5hl_fortran_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libhdf5hl_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \ + $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(FCLD) \ + $(AM_FCFLAGS) $(FCFLAGS) $(libhdf5hl_fortran_la_LDFLAGS) \ + $(LDFLAGS) -o $@ +PROGRAMS = $(noinst_PROGRAMS) +am_H5HL_buildiface_OBJECTS = H5HL_buildiface.$(OBJEXT) +H5HL_buildiface_OBJECTS = $(am_H5HL_buildiface_OBJECTS) +H5HL_buildiface_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src +depcomp = $(SHELL) $(top_srcdir)/bin/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +AM_V_PPFC = $(am__v_PPFC_@AM_V@) +am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@) +am__v_PPFC_0 = @echo " PPFC " $@; +am__v_PPFC_1 = +FCLD = $(FC) +FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_FCLD = $(am__v_FCLD_@AM_V@) +am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) +am__v_FCLD_0 = @echo " FCLD " $@; +am__v_FCLD_1 = +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libhdf5hl_fortran_la_SOURCES) $(H5HL_buildiface_SOURCES) +DIST_SOURCES = $(libhdf5hl_fortran_la_SOURCES) \ + $(H5HL_buildiface_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red='[0;31m'; \ + grn='[0;32m'; \ + lgn='[1;32m'; \ + blu='[1;34m'; \ + mgn='[0;35m'; \ + brg='[1m'; \ + std='[m'; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.sh.log=.log) +SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver +SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ + +# H5_CFLAGS holds flags that should be used when building hdf5, +# but which should not be exported to h5cc for building other programs. +# AM_CFLAGS is an automake construct which should be used by Makefiles +# instead of CFLAGS, as CFLAGS is reserved solely for the user to define. +# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. +AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ +AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \ + -I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \ + -I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src +AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \ + $(F9XMODFLAG)$(top_builddir)/fortran/src +AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1) +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_VERSION = @CC_VERSION@ +CFLAGS = @CFLAGS@ +CLEARFILEBUF = @CLEARFILEBUF@ +CODESTACK = @CODESTACK@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CXX_VERSION = @CXX_VERSION@ +CYGPATH_W = @CYGPATH_W@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ +DIRECT_VFD = @DIRECT_VFD@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ +F9XMODFLAG = @F9XMODFLAG@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FCFLAGS = @FCFLAGS@ +FCFLAGS_f90 = @FCFLAGS_f90@ +FCLIBS = @FCLIBS@ +FC_VERSION = @FC_VERSION@ +FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +Fortran_COMPILER_ID = @Fortran_COMPILER_ID@ +GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ +H5_CFLAGS = @H5_CFLAGS@ +H5_CPPFLAGS = @H5_CPPFLAGS@ +H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_FCFLAGS = @H5_FCFLAGS@ +H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ +H5_LDFLAGS = @H5_LDFLAGS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HAVE_DMALLOC = @HAVE_DMALLOC@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ +HAVE_PTHREAD = @HAVE_PTHREAD@ +HDF5_HL = @HDF5_HL@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HDF_CXX = @HDF_CXX@ +HDF_FORTRAN = @HDF_FORTRAN@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT = @INSTRUMENT@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LL_PATH = @LL_PATH@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MPE = @MPE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ +PARALLEL = @PARALLEL@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SIZE_T = @SIZE_T@ +STATIC_EXEC = @STATIC_EXEC@ +STATIC_SHARED = @STATIC_SHARED@ +STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ +STRIP = @STRIP@ +TESTPARALLEL = @TESTPARALLEL@ +THREADSAFE = @THREADSAFE@ +TIME = @TIME@ +TR = @TR@ +TRACE_API = @TRACE_API@ +UNAME_INFO = @UNAME_INFO@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +USINGMEMCHECKER = @USINGMEMCHECKER@ +VERSION = @VERSION@ +WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +ac_ct_FC = @ac_ct_FC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ + +# Install directories that automake doesn't know about +docdir = $(exec_prefix)/doc +dvidir = @dvidir@ +enable_shared = @enable_shared@ +enable_static = @enable_static@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Some machines need a command to run executables; this is that command +# so that our tests will run. +# We use RUNEXEC instead of RUNSERIAL directly because it may be that +# some tests need to be run with a different command. Older versions +# of the makefiles used the command +# $(LIBTOOL) --mode=execute +# in some directories, for instance. +RUNEXEC = $(RUNSERIAL) + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la + +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by Gnu at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. + +# Scripts used to build examples +# If only shared libraries have been installed, have h5cc build examples with +# shared libraries instead of static libraries +H5CC = ${DESTDIR}$(bindir)/h5cc +H5CC_PP = ${DESTDIR}$(bindir)/h5pcc +H5FC = ${DESTDIR}$(bindir)/h5fc +H5FC_PP = ${DESTDIR}$(bindir)/h5pfc +H5CPP = ${DESTDIR}$(bindir)/h5c++ +ACLOCAL_AMFLAGS = "-I m4" + +# The trace script; this is used on source files from the C library to +# insert tracing macros. +TRACE = perl $(top_srcdir)/bin/trace + +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +# *.clog and *.clog2 are from the MPE option. +CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 + +# Add libtool shared library version numbers to the HDF5 library +# See libtool versioning documentation online. +# After making changes, run bin/reconfigure to update other configure related +# files like Makefile.in. +LT_VERS_INTERFACE = 6 +LT_VERS_REVISION = 222 +LT_VERS_AGE = 0 + +# Our main target, the high-level fortran library +lib_LTLIBRARIES = libhdf5hl_fortran.la + +# Add libtool numbers to the HDF5 HL Fortran library (from config/lt_vers.am) +libhdf5hl_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS) + +# Source files for the library +#if BUILD_PARALLEL_CONDITIONAL +# PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.F90 +#endif + +# List sources to include in the HDF5 HL Fortran library. +libhdf5hl_fortran_la_SOURCES = H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \ + H5DSff.F90 H5LTff.F90 H5TBff.F90 H5IMff.F90 H5LTff_gen.F90 H5TBff_gen.F90 + + +# HDF5 HL Fortran library depends on HDF5 Library. +libhdf5hl_fortran_la_LIBADD = $(LIBH5_HL) $(LIBH5F) + +#H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) + +# H5HL_buildiface.F90 is included in the distribution, and Automake knows +# how to compile a fortran program given its sources. +H5HL_buildiface_SOURCES = H5HL_buildiface.F90 +PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES) $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS) +LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE) + +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) + +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) + +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = +TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) +TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) +all: all-am + +.SUFFIXES: +.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign hl/fortran/src/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am: + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } + +libhdf5hl_fortran.la: $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_DEPENDENCIES) $(EXTRA_libhdf5hl_fortran_la_DEPENDENCIES) + $(AM_V_FCLD)$(libhdf5hl_fortran_la_LINK) -rpath $(libdir) $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_LIBADD) $(LIBS) + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +H5HL_buildiface$(EXEEXT): $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_DEPENDENCIES) $(EXTRA_H5HL_buildiface_DEPENDENCIES) + @rm -f H5HL_buildiface$(EXEEXT) + $(AM_V_FCLD)$(FCLINK) $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DSfc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMcc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMfc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTfc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TBfc.Plo@am__quote@ + +.F90.obj: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.F90.lo: + $(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $< + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +.sh.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.sh$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local +installdirs: + for dir in "$(DESTDIR)$(libdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-local distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-data-local + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic \ + maintainer-clean-local + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool mostlyclean-local + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-libLTLIBRARIES uninstall-local + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ + check-am clean clean-generic clean-libLTLIBRARIES \ + clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ + distclean-libtool distclean-local distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-data-local install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic maintainer-clean-local mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \ + uninstall uninstall-am uninstall-libLTLIBRARIES \ + uninstall-local + + +# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. +# This tells the Makefiles that these targets are not files to be built but +# commands that should be executed even if a file with the same name already +# exists. +.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ + build-tests check-clean check-install check-p check-s check-vfd \ + install-doc lib progs tests uninstall-doc _exec_check-s _test help + +help: + @$(top_srcdir)/bin/makehelp + +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. + +# Fortran module files can have different extensions and different names +# (e.g., different capitalizations) on different platforms. Write rules +# for them explicitly rather than trying to teach automake about them. +# They should be installed as headers and removed during clean. +maintainer-clean-local: clean-local +distclean-local: clean-local +clean-local: + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + $(RM) *.$(F9XMODEXT) H5LTff_gen.F90 H5TBff_gen.F90; \ + fi + +install-data-local: + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(DESTDIR)$(includedir)/. ; \ + fi + +uninstall-local: + @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(DESTDIR)$(includedir)/HDF5.$(F9XMODEXT)"; then \ + set -x; $(RM) $(includedir)/*.$(F9XMODEXT); \ + fi; \ + fi + +# H5HL_buildiface.F90 generates all the APIs that have a KIND type associated +# with them. + +H5LTff_gen.F90: H5HL_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5HL_buildiface$(EXEEXT) + +H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) +# Hardcode the dependencies of these files. There isn't a known way of +# determining this automagically (like we do with the C files). So, when +# doing a parallel make, some modules could be made way before the +# modules they depend upon are actually made. *sigh* +H5DSff.lo: $(srcdir)/H5DSff.F90 +H5LTff.lo: $(srcdir)/H5LTff.F90 +H5IMff.lo: $(srcdir)/H5IMff.F90 +H5TBff.lo: $(srcdir)/H5TBff.F90 +H5LTff_gen.lo: H5LTff.lo H5LTff_gen.F90 +H5TBff_gen.lo: H5TBff.lo H5LTff_gen.F90 H5TBff_gen.F90 + +# Treat all .f90 and .F90 files as preprocessed Fortran. +.f90.o: + $(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $< +.F90.o: + $(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $< + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) + +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +# UPDATE: docs no longer reside in this build tree, so this target +# is depreciated. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) -rf $(CHECK_CLEANFILES) + +# run check-clean whenever mostlyclean is run +mostlyclean-local: build-check-clean + +# check-install is just a synonym for installcheck +check-install: installcheck + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in chk_TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: + @$(MAKE) build-check-s + @$(MAKE) build-check-p + +# Actual execution of check-s. +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) + +# The dummy.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ + tname=$(@:.chkexe_=)$(EXEEXT);\ + log=$(@:.chkexe_=.chklog); \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ + echo "No need to test $${tname} again."; \ + else \ + echo "============================" > $${log}; \ + if test "X$(FORTRAN_API)" = "Xyes"; then \ + echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + elif test "X$(CXX_API)" = "Xyes"; then \ + echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ + else \ + echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ + echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + fi; \ + echo "============================" >> $${log}; \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + echo "" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)"; \ + cat $${log}; \ + fi; \ + fi + +# The dummysh.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + cmd=$(@:.chkexe_=);\ + tname=`basename $$cmd`;\ + chkname=`basename $(@:.chkexe_=.chkexe)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ + echo "No need to test $${tname} again."; \ + else \ + echo "============================" > $${log}; \ + if test "X$(FORTRAN_API)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + elif test "X$(CXX_API)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + else \ + echo "Testing $${tname} $(TEST_FLAGS)"; \ + echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + fi; \ + echo "============================" >> $${log}; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $${chkname} || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + echo "" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)"; \ + cat $${log}; \ + fi; \ + echo "============================"; \ + fi + +# Actual execution of check-p. +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ + fi; \ + done + @for test in $(TEST_SCRIPT_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ + fi; \ + done + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ + HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ + fi; \ + done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/hl/fortran/test/tstlite.F90 b/hl/fortran/test/tstlite.F90 index 0eb005b..0ba7815 100644 --- a/hl/fortran/test/tstlite.F90 +++ b/hl/fortran/test/tstlite.F90 @@ -19,7 +19,7 @@ #include <H5config_f.inc> PROGRAM lite_test - + CALL test_dataset1D() CALL test_dataset2D() CALL test_dataset3D() @@ -38,149 +38,148 @@ END PROGRAM lite_test !------------------------------------------------------------------------- SUBROUTINE test_dataset1D() + + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + + IMPLICIT NONE + + INTEGER, PARAMETER :: DIM1 = 4 ! Dimension of array + CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions + INTEGER :: rank = 1 ! Dataset rank + INTEGER, DIMENSION(DIM1) :: buf1 ! Data buffer + INTEGER, DIMENSION(DIM1) :: bufr1 ! Data buffer + REAL, DIMENSION(DIM1) :: buf2 ! Data buffer + REAL, DIMENSION(DIM1) :: bufr2 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr3 ! Data buffer + INTEGER :: errcode ! Error flag + INTEGER :: i ! general purpose integer + TYPE(C_PTR) :: f_ptr + integer(HID_T) :: mytype -USE, INTRINSIC :: ISO_C_BINDING -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - -INTEGER, PARAMETER :: DIM1 = 4; ! Dimension of array -CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions -INTEGER :: rank = 1 ! Dataset rank -INTEGER, DIMENSION(DIM1) :: buf1 ! Data buffer -INTEGER, DIMENSION(DIM1) :: bufr1 ! Data buffer -REAL, DIMENSION(DIM1) :: buf2 ! Data buffer -REAL, DIMENSION(DIM1) :: bufr2 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr3 ! Data buffer -INTEGER :: errcode ! Error flag -INTEGER :: i ! general purpose integer -TYPE(C_PTR) :: f_ptr -integer(HID_T) :: mytype - -CALL test_begin(' Make/Read datasets (1D) ') - -! -! Initialize the data array. -! -DO i = 1, DIM1 - buf1(i) = i; - buf2(i) = i; - buf3(i) = i; -END DO + CALL test_begin(' Make/Read datasets (1D) ') -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) + ! + ! Initialize the data array. + ! + DO i = 1, DIM1 + buf1(i) = i + buf2(i) = i + buf3(i) = i + END DO -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) -!------------------------------------------------------------------------- -! H5T_NATIVE_INTEGER -!------------------------------------------------------------------------- + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode) + !------------------------------------------------------------------------- + ! H5T_NATIVE_INTEGER + !------------------------------------------------------------------------- -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode) + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf1(i) .NE. bufr1(i) ) THEN - PRINT *, 'read buffer differs from write buffer (I)' - PRINT *, bufr1(i), ' and ', buf1(i) - STOP - ENDIF -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf1(i) .NE. bufr1(i) ) THEN + PRINT *, 'read buffer differs from write buffer (I)' + PRINT *, bufr1(i), ' and ', buf1(i) + STOP + ENDIF + END DO -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- + !------------------------------------------------------------------------- + ! H5T_NATIVE_REAL + !------------------------------------------------------------------------- -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode) + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode) -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf2(i) .NE. bufr2(i) ) THEN - PRINT *, 'read buffer differs from write buffer (R)' - PRINT *, bufr2(i), ' and ', buf2(i) - STOP - ENDIF -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf2(i) .NE. bufr2(i) ) THEN + PRINT *, 'read buffer differs from write buffer (R)' + PRINT *, bufr2(i), ' and ', buf2(i) + STOP + ENDIF + END DO -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- + !------------------------------------------------------------------------- + ! H5T_NATIVE_DOUBLE + !------------------------------------------------------------------------- -! -! write dataset. -! -f_ptr = C_LOC(buf3(1)) -mytype = h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, & - mytype, f_ptr, errcode) -!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode) -! h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) -! -! read dataset. -! -f_ptr = C_LOC(bufr3(1)) -CALL h5ltread_dataset_f(file_id, dsetname3, & - h5kind_to_type(KIND(bufr3(1)), H5_REAL_KIND), f_ptr, errcode) -!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode) + ! + ! write dataset. + ! + f_ptr = C_LOC(buf3(1)) + mytype = h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, & + mytype, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode) + ! h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) + ! + ! read dataset. + ! + f_ptr = C_LOC(bufr3(1)) + CALL h5ltread_dataset_f(file_id, dsetname3, & + h5kind_to_type(KIND(bufr3(1)), H5_REAL_KIND), f_ptr, errcode) + !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf3(i) .NE. bufr3(i) ) THEN - PRINT *, 'read buffer differs from write buffer (D)' - PRINT *, bufr3(i), ' and ', buf3(i) - STOP - ENDIF -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf3(i) .NE. bufr3(i) ) THEN + PRINT *, 'read buffer differs from write buffer (D)' + PRINT *, bufr3(i), ' and ', buf3(i) + STOP + ENDIF + END DO -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) -CALL passed() -! -! end function. -! + CALL passed() + ! + ! end function. + ! END SUBROUTINE test_dataset1D !------------------------------------------------------------------------- @@ -189,194 +188,193 @@ END SUBROUTINE test_dataset1D SUBROUTINE test_dataset2D() -USE, INTRINSIC :: ISO_C_BINDING -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - - -INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4; ! columns -INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6; ! rows -CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions -INTEGER :: rank = 2 ! Dataset rank -INTEGER, DIMENSION(DIM1*DIM2) :: buf ! Data buffer -INTEGER, DIMENSION(DIM1*DIM2) :: bufr ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2) :: buf2 ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2) :: buf2r ! Data buffer -REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3 ! Data buffer -REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3r ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4r ! Data buffer -INTEGER :: errcode ! Error flag -INTEGER(HSIZE_T) :: i, j, n ! general purpose integers -TYPE(C_PTR) :: f_ptr - -CALL test_begin(' Make/Read datasets (2D) ') + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + IMPLICIT NONE -! -! Initialize the data arrays. -! -n=1 -DO i = 1, DIM1*DIM2 - buf(i) = INT(n) - n = n + 1 -END DO -DO i = 1, dims(1) - DO j = 1, dims(2) - buf2(i,j) = INT((i-1)*dims(2) + j) - buf3(i,j) = INT((i-1)*dims(2) + j) - buf4(i,j) = INT((i-1)*dims(2) + j) - END DO -END DO + INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4 ! columns + INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6 ! rows + CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions + INTEGER :: rank = 2 ! Dataset rank + INTEGER, DIMENSION(DIM1*DIM2) :: buf ! Data buffer + INTEGER, DIMENSION(DIM1*DIM2) :: bufr ! Data buffer + INTEGER, DIMENSION(DIM1,DIM2) :: buf2 ! Data buffer + INTEGER, DIMENSION(DIM1,DIM2) :: buf2r ! Data buffer + REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3 ! Data buffer + REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3r ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4r ! Data buffer + INTEGER :: errcode ! Error flag + INTEGER(HSIZE_T) :: i, j, n ! general purpose integers + TYPE(C_PTR) :: f_ptr + CALL test_begin(' Make/Read datasets (2D) ') -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + ! + ! Initialize the data arrays. + ! + n=1 + DO i = 1, DIM1*DIM2 + buf(i) = INT(n) + n = n + 1 + END DO -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 1D buffer -!------------------------------------------------------------------------- + DO i = 1, dims(1) + DO j = 1, dims(2) + buf2(i,j) = INT((i-1)*dims(2) + j) + buf3(i,j) = INT((i-1)*dims(2) + j) + buf4(i,j) = INT((i-1)*dims(2) + j) + END DO + END DO -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) -! -! compare read and write buffers. -! -DO i = 1, DIM1*DIM2 - IF ( buf(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr(i), ' and ', buf(i) - STOP - ENDIF -END DO + !------------------------------------------------------------------------- + ! H5T_NATIVE_INT 1D buffer + !------------------------------------------------------------------------- -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 2D buffer -!------------------------------------------------------------------------- + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1*DIM2 + IF ( buf(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr(i), ' and ', buf(i) + STOP + ENDIF + END DO -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf2r(i,j), ' and ', buf2(i,j) - STOP - ENDIF - END DO -END DO + !------------------------------------------------------------------------- + ! H5T_NATIVE_INT 2D buffer + !------------------------------------------------------------------------- -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) -! -! write dataset. -! -f_ptr = C_LOC(buf3(1,1)) -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) -!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) -! -! read dataset. -! -f_ptr = C_LOC(buf3r(1,1)) -CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) -!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf2r(i,j), ' and ', buf2(i,j) + STOP + ENDIF + END DO + END DO -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf3r(i,j), ' and ', buf3(i,j) - STOP - ENDIF - END DO -END DO + !------------------------------------------------------------------------- + ! H5T_NATIVE_REAL + !------------------------------------------------------------------------- -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- + ! + ! write dataset. + ! + f_ptr = C_LOC(buf3(1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) -! -! write dataset. -! -f_ptr = C_LOC(buf4(1,1)) -CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) -!CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode) + ! + ! read dataset. + ! + f_ptr = C_LOC(buf3r(1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) -! -! read dataset. -f_ptr = C_LOC(buf4r(1,1)) -CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf3r(i,j), ' and ', buf3(i,j) + STOP + ENDIF + END DO + END DO -!CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode) + !------------------------------------------------------------------------- + ! H5T_NATIVE_DOUBLE + !------------------------------------------------------------------------- -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf4r(i,j), ' and ', buf4(i,j) - STOP - ENDIF - END DO -END DO + ! + ! write dataset. + ! + f_ptr = C_LOC(buf4(1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode) -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) + ! + ! read dataset. + f_ptr = C_LOC(buf4r(1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) + !CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode) -CALL passed() -! -! end function. -! + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf4r(i,j), ' and ', buf4(i,j) + STOP + ENDIF + END DO + END DO + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + CALL passed() + ! + ! end function. + ! END SUBROUTINE test_dataset2D @@ -386,215 +384,313 @@ END SUBROUTINE test_dataset2D SUBROUTINE test_dataset3D() -USE, INTRINSIC :: ISO_C_BINDING -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - -INTEGER, PARAMETER :: DIM1 = 6 ! columns -INTEGER, PARAMETER :: DIM2 = 4 ! rows -INTEGER, PARAMETER :: DIM3 = 2 ! layers -CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions -INTEGER(HSIZE_T), DIMENSION(3) :: dimsr ! Dataset dimensions -INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf ! Data buffer -INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2 ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r ! Data buffer -REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3 ! Data buffer -REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3r ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4r ! Data buffer -INTEGER :: rank = 3 ! Dataset rank -INTEGER :: errcode ! Error flag -INTEGER(HSIZE_T) :: i, j, k, n ! general purpose integers -INTEGER :: type_class -INTEGER(SIZE_T) :: type_size -TYPE(C_PTR) :: f_ptr -CALL test_begin(' Make/Read datasets (3D) ') + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + IMPLICIT NONE -! -! Initialize the data array. -! -n=1 -DO i = 1, DIM1*DIM2*DIM3 - buf(i) = INT(n) - n = n + 1 -END DO - -n = 1 -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - buf2(i,j,k) = INT(n) - buf3(i,j,k) = INT(n) - buf4(i,j,k) = INT(n) - n = n + 1 - END DO - END DO -END DO + INTEGER, PARAMETER :: DIM1 = 6 ! columns + INTEGER, PARAMETER :: DIM2 = 4 ! rows + INTEGER, PARAMETER :: DIM3 = 2 ! layers + CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions + INTEGER(HSIZE_T), DIMENSION(3) :: dimsr ! Dataset dimensions + INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf ! Data buffer + INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr ! Data buffer + INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2 ! Data buffer + INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r ! Data buffer + REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3 ! Data buffer + REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3r ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4r ! Data buffer + INTEGER :: rank = 3 ! Dataset rank + INTEGER :: errcode ! Error flag + INTEGER(HSIZE_T) :: i, j, k, n ! general purpose integers + INTEGER :: type_class + INTEGER(SIZE_T) :: type_size + TYPE(C_PTR) :: f_ptr +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + INTEGER, PARAMETER :: int_kind_32 = SELECTED_INT_KIND(36) !should map to INTEGER*16 on most modern processors + INTEGER(int_kind_32), DIMENSION(DIM1,DIM2,DIM3), TARGET :: dset_data_i32, data_out_i32 + INTEGER(HID_T) :: dset_id32 ! Dataset identifier + CHARACTER(LEN=7), PARAMETER :: dsetname16a = "dset16a" ! Dataset name + CHARACTER(LEN=7), PARAMETER :: dsetname16b = "dset16b" ! Dataset name + CHARACTER(LEN=7), PARAMETER :: dsetname16c = "dset16c" ! Dataset name + INTEGER(HID_T) :: type_id +#endif -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) + CALL test_begin(' Make/Read datasets (3D) ') -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 1D buffer -!------------------------------------------------------------------------- + ! + ! Initialize the data array. + ! + n=1 + DO i = 1, DIM1*DIM2*DIM3 + buf(i) = INT(n) + n = n + 1 + END DO -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) + n = 1 + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + buf2(i,j,k) = INT(n) + buf3(i,j,k) = INT(n) + buf4(i,j,k) = INT(n) +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + dset_data_i32(i,j,k) = HUGE(1_int_kind_32)-INT(n,int_kind_32) +#endif + n = n + 1 + END DO + END DO + END DO -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) -! -! compare read and write buffers. -! -DO i = 1, DIM1*DIM2*DIM3 - IF ( buf(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr(i), ' and ', buf(i) - STOP - ENDIF -END DO + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 3D buffer -!------------------------------------------------------------------------- + !------------------------------------------------------------------------- + ! H5T_NATIVE_INT 1D buffer + !------------------------------------------------------------------------- -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf2r(i,j,k), ' and ', buf2(i,j,k) - STOP - ENDIF - END DO - END DO -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1*DIM2*DIM3 + IF ( buf(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr(i), ' and ', buf(i) + STOP + ENDIF + END DO -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- + !------------------------------------------------------------------------- + ! H5T_NATIVE_INT 3D buffer + !------------------------------------------------------------------------- -! -! write dataset. -! -f_ptr = C_LOC(buf3(1,1,1)) -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) -!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) + ! + ! write dataset. + ! + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) -! -! read dataset. -! -f_ptr = C_LOC(buf3r(1,1,1)) -CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) -!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) + ! + ! read dataset. + ! + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf3r(i,j,k), ' and ', buf3(i,j,k) - STOP - ENDIF - END DO - END DO -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf2r(i,j,k), ' and ', buf2(i,j,k) + STOP + ENDIF + END DO + END DO + END DO -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- + !------------------------------------------------------------------------- + ! H5T_NATIVE_REAL + !------------------------------------------------------------------------- -! -! write dataset. -! -f_ptr = C_LOC(buf4(1,1,1)) -CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ! + ! write dataset. + ! + f_ptr = C_LOC(buf3(1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) -! -! read dataset. -! -f_ptr = C_LOC(buf4r(1,1,1)) -CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ! + ! read dataset. + ! + f_ptr = C_LOC(buf3r(1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf4r(i,j,k), ' and ', buf4(i,j,k) - STOP - ENDIF - END DO - END DO -END DO + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf3r(i,j,k), ' and ', buf3(i,j,k) + STOP + ENDIF + END DO + END DO + END DO -CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + !------------------------------------------------------------------------- + ! H5T_NATIVE_DOUBLE + !------------------------------------------------------------------------- -! -! compare dimensions -! -DO i = 1, rank - IF ( dimsr(i) .NE. dims(i) ) THEN - PRINT *, 'dimensions differ ' - STOP - ENDIF -END DO + ! + ! write dataset. + ! + f_ptr = C_LOC(buf4(1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) + ! + ! read dataset. + ! + f_ptr = C_LOC(buf4r(1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf4r(i,j,k), ' and ', buf4(i,j,k) + STOP + ENDIF + END DO + END DO + END DO -CALL passed() -! -! end function. -! + CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + + ! + ! compare dimensions + ! + DO i = 1, rank + IF ( dimsr(i) .NE. dims(i) ) THEN + PRINT *, 'dimensions differ ' + STOP + ENDIF + END DO + + !------------------------------------------------------------------------- + ! CHECKING NON-NATIVE INTEGER TYPES + !------------------------------------------------------------------------- + +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + ! (A) CHECKING INTEGER*16 + ! + ! (i.a) write dataset using F2003 interface + ! + type_id = H5kind_to_type(KIND(dset_data_i32(1,1,1)), H5_INTEGER_KIND) + f_ptr = C_LOC(dset_data_i32(1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname16a, rank, dims, type_id, f_ptr, errcode) + ! + ! (i.b) read dataset using F2003 interface + ! + f_ptr = C_LOC(data_out_i32(1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname16a, type_id, f_ptr, errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + STOP + ENDIF + END DO + END DO + ENDDO + + ! + ! (ii.a) write dataset using F90 interface + ! + type_id = H5kind_to_type(KIND(dset_data_i32(1,1,1)), H5_INTEGER_KIND) + CALL h5ltmake_dataset_f(file_id, dsetname16b, rank, dims, type_id, dset_data_i32, errcode) + ! + ! (ii.b) read dataset using F90 interface + ! + CALL h5ltread_dataset_f(file_id, dsetname16b, type_id, data_out_i32, dims, errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + STOP + ENDIF + END DO + END DO + ENDDO + + ! + ! (iii.a) write dataset using F90 H5LTmake_dataset_int_f interface + ! + CALL h5ltmake_dataset_int_f(file_id, dsetname16c, rank, dims, dset_data_i32, errcode) + + ! + ! (iii.b) read dataset using F90 H5LTmake_dataset_int_f interface + ! + CALL h5ltread_dataset_int_f(file_id, dsetname16c, data_out_i32, dims, errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + STOP + ENDIF + END DO + END DO + ENDDO + +#endif + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + CALL passed() + ! + ! end function. + ! END SUBROUTINE test_dataset3D !------------------------------------------------------------------------- @@ -623,6 +719,7 @@ SUBROUTINE test_datasetND(rank) CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname5 = "dset5" ! Dataset name INTEGER(HID_T) :: file_id ! File identifier INTEGER(HSIZE_T), DIMENSION(7) :: dims INTEGER(HSIZE_T), DIMENSION(7) :: dimsr ! Dataset dimensions @@ -650,29 +747,41 @@ SUBROUTINE test_datasetND(rank) DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: dbufr_6 ! Data buffer DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbuf_7 ! Data buffer DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbufr_7 ! Data buffer - INTEGER :: errcode ! Error flag - INTEGER(HSIZE_T) :: i, j, k, l, m, n, o, nn ! general purpose integers + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: cbuf_4 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: cbufr_4 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: cbuf_5 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: cbufr_5 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: cbuf_6 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: cbufr_6 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: cbuf_7 ! Data buffer + CHARACTER(LEN=5), ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: cbufr_7 ! Data buffer + INTEGER :: errcode ! Error flag + INTEGER(HSIZE_T) :: i, j, k, l, m, n, o, nn ! general purpose integers INTEGER :: type_class INTEGER(SIZE_T) :: type_size CHARACTER(LEN=1) :: ichr1 + CHARACTER(LEN=3) :: ichr3 TYPE(C_PTR) :: f_ptr + INTEGER(HID_T) :: type_id WRITE(ichr1,'(I1.1)') rank CALL test_begin(' Make/Read datasets ('//ichr1//'D) ') -! -! Initialize the data array. -! + ! + ! Initialize the data array. + ! IF(rank.EQ.4)THEN - + ALLOCATE(ibuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) ALLOCATE(ibufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) ALLOCATE(rbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) ALLOCATE(rbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) ALLOCATE(dbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) ALLOCATE(dbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(cbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(cbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,0,0,0/) - + nn = 1 DO i = 1, DIM1 DO j = 1, DIM2 @@ -681,12 +790,14 @@ SUBROUTINE test_datasetND(rank) ibuf_4(i,j,k,l) = INT(nn) rbuf_4(i,j,k,l) = INT(nn) dbuf_4(i,j,k,l) = INT(nn) + WRITE(cbuf_4(i,j,k,l),'(I5.5)') nn nn = nn + 1 END DO END DO END DO + ENDDO - + ELSE IF(rank.EQ.5)THEN ALLOCATE(ibuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) @@ -695,9 +806,11 @@ SUBROUTINE test_datasetND(rank) ALLOCATE(rbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) ALLOCATE(dbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) ALLOCATE(dbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(cbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(cbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,0,0/) - + nn = 1 DO i = 1, DIM1 DO j = 1, DIM2 @@ -707,6 +820,7 @@ SUBROUTINE test_datasetND(rank) ibuf_5(i,j,k,l,m) = INT(nn) rbuf_5(i,j,k,l,m) = INT(nn) dbuf_5(i,j,k,l,m) = INT(nn) + WRITE(cbuf_5(i,j,k,l,m),'(I5.5)') nn nn = nn + 1 END DO END DO @@ -722,9 +836,11 @@ SUBROUTINE test_datasetND(rank) ALLOCATE(rbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) ALLOCATE(dbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) ALLOCATE(dbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(cbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(cbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,0/) - + nn = 1 DO i = 1, DIM1 DO j = 1, DIM2 @@ -735,6 +851,7 @@ SUBROUTINE test_datasetND(rank) ibuf_6(i,j,k,l,m,n) = INT(nn) rbuf_6(i,j,k,l,m,n) = INT(nn) dbuf_6(i,j,k,l,m,n) = INT(nn) + WRITE(cbuf_6(i,j,k,l,m,n),'(I5.5)') nn nn = nn + 1 END DO END DO @@ -742,18 +859,20 @@ SUBROUTINE test_datasetND(rank) ENDDO ENDDO ENDDO - + ELSE IF(rank.EQ.7)THEN - + ALLOCATE(ibuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) ALLOCATE(ibufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) ALLOCATE(rbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) ALLOCATE(rbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) ALLOCATE(dbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) ALLOCATE(dbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(cbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(cbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,DIM7/) - + nn = 1 DO i = 1, DIM1 DO j = 1, DIM2 @@ -765,6 +884,7 @@ SUBROUTINE test_datasetND(rank) ibuf_7(i,j,k,l,m,n,o) = INT(nn) rbuf_7(i,j,k,l,m,n,o) = INT(nn) dbuf_7(i,j,k,l,m,n,o) = INT(nn) + WRITE(cbuf_7(i,j,k,l,m,n,o),'(I5.5)') nn nn = nn + 1 END DO END DO @@ -803,7 +923,7 @@ SUBROUTINE test_datasetND(rank) ELSE IF(rank.EQ.7)THEN CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_7, errcode) ENDIF - + ! ! read dataset. @@ -874,7 +994,7 @@ SUBROUTINE test_datasetND(rank) IF(rank.EQ.4)THEN f_ptr = C_LOC(rbuf_4(1,1,1,1)) CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) - ! CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode) + ! CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode) ELSE IF(rank.EQ.5)THEN f_ptr = C_LOC(rbuf_5(1,1,1,1,1)) CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) @@ -887,7 +1007,7 @@ SUBROUTINE test_datasetND(rank) CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_7, errcode) ENDIF - + ! ! read dataset. @@ -972,7 +1092,6 @@ SUBROUTINE test_datasetND(rank) f_ptr = C_LOC(dbuf_7(1,1,1,1,1,1,1)) CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode) ENDIF - ! ! read dataset. @@ -1037,8 +1156,97 @@ SUBROUTINE test_datasetND(rank) ENDDO ENDDO + !------------------------------------------------------------------------- + ! H5T_NATIVE_CHARACTER ND buffer + !------------------------------------------------------------------------- + + CALL H5Tcopy_f(H5T_FORTRAN_S1, type_id, errcode) + CALL H5Tset_size_f(type_id, 5_SIZE_T, errcode) + ! + ! write dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(cbuf_4(1,1,1,1)(1:1)) + CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(cbuf_5(1,1,1,1,1)(1:1)) + CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(cbuf_6(1,1,1,1,1,1)(1:1)) + CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(cbuf_7(1,1,1,1,1,1,1)(1:1)) + CALL h5ltmake_dataset_f(file_id, dsetname5, rank, dims(1:rank), type_id, f_ptr, errcode) + ENDIF + + ! + ! read dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(cbufr_4(1,1,1,1)(1:1)) + CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(cbufr_5(1,1,1,1,1)(1:1)) + CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(cbufr_6(1,1,1,1,1,1)(1:1)) + CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(cbufr_7(1,1,1,1,1,1,1)(1:1)) + CALL h5ltread_dataset_f(file_id, dsetname5, type_id, f_ptr, errcode) + ENDIF + + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + DO l = 1, dims(4) + IF(rank.EQ.4)THEN + IF ( cbuf_4(i,j,k,l) .NE. cbufr_4(i,j,k,l) ) THEN + PRINT *, 'read buffer differs from write buffer (character)' + PRINT *, cbuf_4(i,j,k,l), ' and ', cbufr_4(i,j,k,l) + STOP + ENDIF + ENDIF + DO m = 1, dims(5) + IF(rank.EQ.5)THEN + IF ( cbuf_5(i,j,k,l,m) .NE. cbufr_5(i,j,k,l,m) ) THEN + PRINT *, 'read buffer differs from write buffer (character)' + PRINT *, cbuf_5(i,j,k,l,m), ' and ', cbufr_5(i,j,k,l,m) + STOP + ENDIF + ENDIF + DO n = 1, dims(6) + IF(rank.EQ.6)THEN + IF ( cbuf_6(i,j,k,l,m,n) .NE. cbufr_6(i,j,k,l,m,n) ) THEN + PRINT *, 'read buffer differs from write buffer (character)' + PRINT *, cbuf_6(i,j,k,l,m,n), ' and ', cbufr_6(i,j,k,l,m,n) + STOP + ENDIF + ENDIF + DO o = 1, dims(7) + IF(rank.EQ.7)THEN + IF ( cbuf_7(i,j,k,l,m,n,o) .NE. cbufr_7(i,j,k,l,m,n,o) ) THEN + PRINT *, 'read buffer differs from write buffer (character)' + PRINT *, cbuf_7(i,j,k,l,m,n,o), ' and ', cbufr_7(i,j,k,l,m,n,o) + STOP + ENDIF + ENDIF + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + CALL h5tclose_f(type_id,errcode) + ! ! compare dimensions ! @@ -1062,13 +1270,13 @@ SUBROUTINE test_datasetND(rank) ! DEALLOCATE RESOURCES IF(rank.EQ.4)THEN - DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4) + DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4, cbuf_4, cbufr_4) ELSE IF(rank.EQ.5)THEN - DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5) + DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5, cbuf_5, cbufr_5) ELSE IF(rank.EQ.6)THEN - DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6) + DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6, cbuf_6, cbufr_6) ELSE IF(rank.EQ.7)THEN - DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7) + DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7, cbuf_7, cbufr_7) ENDIF CALL passed() @@ -1078,7 +1286,6 @@ SUBROUTINE test_datasetND(rank) END SUBROUTINE test_datasetND - !------------------------------------------------------------------------- ! test_datasets !------------------------------------------------------------------------- @@ -1094,7 +1301,7 @@ SUBROUTINE test_datasets() CHARACTER(len=9), PARAMETER :: filename = "dsetf4.h5"! File name INTEGER(HID_T) :: file_id ! File identifier INTEGER :: errcode ! Error flag - INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array + INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name @@ -1108,10 +1315,10 @@ SUBROUTINE test_datasets() CHARACTER(LEN=8) :: buf1r ! Data buffer INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer - REAL, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer - REAL, DIMENSION(DIM1) , TARGET :: bufr3 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4 ! Data buffer + REAL, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer + REAL, DIMENSION(DIM1) , TARGET :: bufr3 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4 ! Data buffer INTEGER :: i, n ! general purpose integer INTEGER :: has ! general purpose integer INTEGER :: type_class @@ -1289,7 +1496,7 @@ SUBROUTINE test_datasets() IF(errcode.LT.0.OR..NOT.path_valid)THEN PRINT *, 'error in h5ltpath_valid_f' STOP - ENDIF + ENDIF ! Should fail, dataset does not exist CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .TRUE., path_valid, errcode) @@ -1306,14 +1513,14 @@ SUBROUTINE test_datasets() ! Create a dangling soft link CALL h5lcreate_soft_f("/G2", file_id, "/G3", errcode) - + ! Should pass, does not check for dangled link CALL h5ltpath_valid_f(file_id, "/G3", .FALSE., path_valid, errcode) IF(.NOT.path_valid)THEN PRINT *, 'error in h5ltpath_valid_f' STOP ENDIF - + ! Should fail, dangled link CALL h5ltpath_valid_f(file_id, "/G2", .TRUE., path_valid, errcode) IF(path_valid)THEN @@ -1336,7 +1543,6 @@ SUBROUTINE test_datasets() STOP ENDIF - !------------------------------------------------------------------------- ! test h5ltfind_dataset_f function !------------------------------------------------------------------------- @@ -1352,7 +1558,6 @@ SUBROUTINE test_datasets() ! test h5ltget_dataset_info_f function !------------------------------------------------------------------------- - CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) ! @@ -1402,7 +1607,7 @@ SUBROUTINE test_attributes() CHARACTER(len=9), PARAMETER :: filename = "dsetf5.h5"! File name CHARACTER(len=9), PARAMETER :: filename1 ="tattr.h5" ! C written attribute file INTEGER(HID_T) :: file_id ! File identifier -! INTEGER(HID_T) :: file_id1 + ! INTEGER(HID_T) :: file_id1 INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array CHARACTER(LEN=5), PARAMETER :: attrname1 = "attr1" ! Attribute name CHARACTER(LEN=5), PARAMETER :: attrname2 = "attr2" ! Attribute name @@ -1413,8 +1618,8 @@ SUBROUTINE test_attributes() CHARACTER(LEN=16), PARAMETER :: buf_c = "string attribute" CHARACTER(LEN=8) :: bufr1 ! Data buffer CHARACTER(LEN=10) :: bufr1_lg ! Data buffer -! CHARACTER(LEN=16) :: bufr_c ! Data buffer -! CHARACTER(LEN=18) :: bufr_c_lg ! Data buffer + ! CHARACTER(LEN=16) :: bufr_c ! Data buffer + ! CHARACTER(LEN=18) :: bufr_c_lg ! Data buffer INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer REAL, DIMENSION(DIM1), target :: buf3 ! Data buffer @@ -1547,41 +1752,41 @@ SUBROUTINE test_attributes() IF(SizeOf_buf_type.LT.16)THEN ! MSB can't handle 16 byte reals - CALL test_begin(' Set/Get attributes double ') + CALL test_begin(' Set/Get attributes double ') - ! - ! write attribute. - ! - f_ptr = C_LOC(buf4(1)) - CALL h5ltset_attribute_f(file_id,dsetname1,attrname4,f_ptr,"real", SizeOf_buf_type, size, errcode) + ! + ! write attribute. + ! + f_ptr = C_LOC(buf4(1)) + CALL h5ltset_attribute_f(file_id,dsetname1,attrname4,f_ptr,"real", SizeOf_buf_type, size, errcode) -! CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4, size, errcode) + ! CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4, size, errcode) - ! - ! read attribute. - ! + ! + ! read attribute. + ! #ifdef H5_FORTRAN_HAVE_STORAGE_SIZE - SizeOf_buf_type = STORAGE_SIZE(bufr4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) + SizeOf_buf_type = STORAGE_SIZE(bufr4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) #else - SizeOf_buf_type = SIZEOF(bufr4(1)) + SizeOf_buf_type = SIZEOF(bufr4(1)) #endif - f_ptr = C_LOC(bufr4(1)) - CALL h5ltget_attribute_f(file_id,dsetname1,attrname4,f_ptr,"REAL",SizeOf_buf_type,errcode) + f_ptr = C_LOC(bufr4(1)) + CALL h5ltget_attribute_f(file_id,dsetname1,attrname4,f_ptr,"REAL",SizeOf_buf_type,errcode) - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf4(i) .NE. bufr4(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr4(i), ' and ', buf4(i) - STOP - ENDIF - END DO - - CALL passed() + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf4(i) .NE. bufr4(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr4(i), ' and ', buf4(i) + STOP + ENDIF + END DO + + CALL passed() ENDIF |