diff options
Diffstat (limited to 'hl/tools/h5watch/h5watch.c')
| -rw-r--r-- | hl/tools/h5watch/h5watch.c | 129 |
1 files changed, 64 insertions, 65 deletions
diff --git a/hl/tools/h5watch/h5watch.c b/hl/tools/h5watch/h5watch.c index 248fb90..d5b4d6e 100644 --- a/hl/tools/h5watch/h5watch.c +++ b/hl/tools/h5watch/h5watch.c @@ -121,11 +121,11 @@ doprint(hid_t did, const hsize_t *start, const hsize_t *block, int rank) subset.block.data[i] = block[i]; } /* end for */ - HDmemset(&ctx, 0, sizeof(ctx)); + memset(&ctx, 0, sizeof(ctx)); ctx.sset = ⊂ /* Set to all default values and then override */ - HDmemset(&info, 0, sizeof info); + memset(&info, 0, sizeof info); if (g_simple_output) { info.idx_fmt = ""; @@ -199,7 +199,7 @@ doprint(hid_t did, const hsize_t *start, const hsize_t *block, int rank) if ((ret_value = h5tools_dump_dset(stdout, &info, &ctx, did)) < 0) error_msg("unable to print data\n"); - HDfprintf(stdout, "\n"); + fprintf(stdout, "\n"); return ret_value; @@ -292,7 +292,7 @@ monitor_dataset(hid_t fid, char *dsetname) hsize_t cur_dims[H5S_MAX_RANK]; /* previous dataspace dimensions */ herr_t ret_value = SUCCEED; /* return value */ - HDfprintf(stdout, "Monitoring dataset %s...\n", dsetname); + fprintf(stdout, "Monitoring dataset %s...\n", dsetname); /* Open the dataset for minitoring */ if ((did = H5Dopen2(fid, dsetname, H5P_DEFAULT)) < 0) { @@ -312,7 +312,7 @@ monitor_dataset(hid_t fid, char *dsetname) ret_value = FAIL; goto done; } - HDfflush(stdout); + fflush(stdout); /* Loop until an error occurs or the user interrupts execution */ while (!g_user_interrupt) { @@ -339,14 +339,13 @@ monitor_dataset(hid_t fid, char *dsetname) if (i != ndims) { /* Printing changes in dimension sizes */ for (u = 0; u < ndims; u++) { - HDfprintf(stdout, "dimension %d: %" PRIuHSIZE "->%" PRIuHSIZE "", u, prev_dims[u], - cur_dims[u]); + fprintf(stdout, "dimension %d: %" PRIuHSIZE "->%" PRIuHSIZE "", u, prev_dims[u], cur_dims[u]); if (cur_dims[u] > prev_dims[u]) - HDfprintf(stdout, " (increases)\n"); + fprintf(stdout, " (increases)\n"); else if (cur_dims[u] < prev_dims[u]) - HDfprintf(stdout, " (decreases)\n"); + fprintf(stdout, " (decreases)\n"); else - HDfprintf(stdout, " (unchanged)\n"); + fprintf(stdout, " (unchanged)\n"); } /* Printing elements appended to the dataset if there is */ @@ -360,7 +359,7 @@ monitor_dataset(hid_t fid, char *dsetname) /* Print the new appended data to the dataset */ if (cur_dims[u] > prev_dims[u]) { - HDfprintf(stdout, " Data:\n"); + fprintf(stdout, " Data:\n"); for (j = 0; j < ndims; j++) { start[j] = 0; @@ -374,17 +373,17 @@ monitor_dataset(hid_t fid, char *dsetname) } } /* end for */ } - HDfflush(stdout); + fflush(stdout); } /* Save the current dimension sizes */ - HDmemcpy(prev_dims, cur_dims, (size_t)ndims * sizeof(hsize_t)); + memcpy(prev_dims, cur_dims, (size_t)ndims * sizeof(hsize_t)); /* Sleep before next monitor */ HDsleep(g_polling_interval); } /* end while */ - HDfflush(stdout); + fflush(stdout); done: /* Closing */ @@ -415,7 +414,7 @@ process_cmpd_fields(hid_t fid, char *dsetname) size_t len; /* number of comma-separated fields in "g_list_of_fields" */ herr_t ret_value = SUCCEED; /* Return value */ - HDassert(g_list_of_fields && *g_list_of_fields); + assert(g_list_of_fields && *g_list_of_fields); /* Open the dataset */ if ((did = H5Dopen2(fid, dsetname, H5P_DEFAULT)) < 0) { @@ -449,7 +448,7 @@ process_cmpd_fields(hid_t fid, char *dsetname) len = HDstrlen(g_list_of_fields) / 2 + 2; /* Allocate memory for a list vector of H5LD_memb_t structures to store "g_list_of_fields" info */ - if ((g_listv = (H5LD_memb_t **)HDcalloc(len, sizeof(H5LD_memb_t *))) == NULL) { + if ((g_listv = (H5LD_memb_t **)calloc(len, sizeof(H5LD_memb_t *))) == NULL) { error_msg("error in allocating memory for H5LD_memb_t\n"); ret_value = FAIL; goto done; @@ -532,8 +531,8 @@ check_dataset(hid_t fid, char *dsetname) goto done; } - HDmemset(cur_dims, 0, sizeof cur_dims); - HDmemset(max_dims, 0, sizeof max_dims); + memset(cur_dims, 0, sizeof cur_dims); + memset(max_dims, 0, sizeof max_dims); /* Get dataset's dataspace */ if ((sid = H5Dget_space(did)) < 0) { @@ -608,46 +607,46 @@ leave(int ret) static void usage(const char *prog) { - HDfflush(stdout); - HDfprintf(stdout, "Usage: %s [OPTIONS] [OBJECT]\n", prog); - HDfprintf(stdout, "\n"); - HDfprintf(stdout, " OPTIONS\n"); - HDfprintf(stdout, " --help Print a usage message and exit.\n"); - HDfprintf(stdout, " --version Print version number and exit.\n"); - HDfprintf(stdout, " --label Label members of compound typed dataset.\n"); - HDfprintf(stdout, " --simple Use a machine-readable output format.\n"); - HDfprintf(stdout, " --dim Monitor changes in size of dataset dimensions only.\n"); - HDfprintf(stdout, " --width=N Set the number of columns to N for output.\n"); - HDfprintf(stdout, " A value of 0 sets the number of columns to the\n"); - HDfprintf(stdout, " maximum (65535). The default width is 80 columns.\n"); - HDfprintf(stdout, " --polling=N Set the polling interval to N (in seconds) when the\n"); - HDfprintf(stdout, - " dataset will be checked for appended data. The default\n"); - HDfprintf(stdout, " polling interval is 1.\n"); - HDfprintf(stdout, " --fields=<list_of_fields>\n"); - HDfprintf(stdout, - " Display data for the fields specified in <list_of_fields>\n"); - HDfprintf(stdout, " for a compound data type. <list_of_fields> can be\n"); - HDfprintf(stdout, " specified as follows:\n"); - HDfprintf(stdout, " 1) A comma-separated list of field names in a\n"); - HDfprintf(stdout, " compound data type. \",\" is the separator\n"); - HDfprintf(stdout, " for field names while \".\" is the separator\n"); - HDfprintf(stdout, " for a nested field.\n"); - HDfprintf(stdout, " 2) A single field name in a compound data type.\n"); - HDfprintf(stdout, " Can use this option multiple times.\n"); - HDfprintf(stdout, " Note that backslash is the escape character to avoid\n"); - HDfprintf(stdout, - " characters in field names that conflict with the tool's\n"); - HDfprintf(stdout, " separators.\n"); - HDfprintf(stdout, "\n"); - HDfprintf(stdout, " OBJECT is specified as [<filename>/<path_to_dataset>/<dsetname>]\n"); - HDfprintf(stdout, " <filename> Name of the HDF5 file. It may be preceded by path\n"); - HDfprintf(stdout, " separated by slashes to the specified HDF5 file.\n"); - HDfprintf(stdout, " <path_to_dataset> Path separated by slashes to the specified dataset\n"); - HDfprintf(stdout, " <dsetname> Name of the dataset\n"); - HDfprintf(stdout, "\n"); - HDfprintf(stdout, - " User can end the h5watch process by ctrl-C (SIGINT) or kill the process (SIGTERM).\n"); + fflush(stdout); + fprintf(stdout, "Usage: %s [OPTIONS] [OBJECT]\n", prog); + fprintf(stdout, "\n"); + fprintf(stdout, " OPTIONS\n"); + fprintf(stdout, " --help Print a usage message and exit.\n"); + fprintf(stdout, " --version Print version number and exit.\n"); + fprintf(stdout, " --label Label members of compound typed dataset.\n"); + fprintf(stdout, " --simple Use a machine-readable output format.\n"); + fprintf(stdout, " --dim Monitor changes in size of dataset dimensions only.\n"); + fprintf(stdout, " --width=N Set the number of columns to N for output.\n"); + fprintf(stdout, " A value of 0 sets the number of columns to the\n"); + fprintf(stdout, " maximum (65535). The default width is 80 columns.\n"); + fprintf(stdout, " --polling=N Set the polling interval to N (in seconds) when the\n"); + fprintf(stdout, + " dataset will be checked for appended data. The default\n"); + fprintf(stdout, " polling interval is 1.\n"); + fprintf(stdout, " --fields=<list_of_fields>\n"); + fprintf(stdout, + " Display data for the fields specified in <list_of_fields>\n"); + fprintf(stdout, " for a compound data type. <list_of_fields> can be\n"); + fprintf(stdout, " specified as follows:\n"); + fprintf(stdout, " 1) A comma-separated list of field names in a\n"); + fprintf(stdout, " compound data type. \",\" is the separator\n"); + fprintf(stdout, " for field names while \".\" is the separator\n"); + fprintf(stdout, " for a nested field.\n"); + fprintf(stdout, " 2) A single field name in a compound data type.\n"); + fprintf(stdout, " Can use this option multiple times.\n"); + fprintf(stdout, " Note that backslash is the escape character to avoid\n"); + fprintf(stdout, + " characters in field names that conflict with the tool's\n"); + fprintf(stdout, " separators.\n"); + fprintf(stdout, "\n"); + fprintf(stdout, " OBJECT is specified as [<filename>/<path_to_dataset>/<dsetname>]\n"); + fprintf(stdout, " <filename> Name of the HDF5 file. It may be preceded by path\n"); + fprintf(stdout, " separated by slashes to the specified HDF5 file.\n"); + fprintf(stdout, " <path_to_dataset> Path separated by slashes to the specified dataset\n"); + fprintf(stdout, " <dsetname> Name of the dataset\n"); + fprintf(stdout, "\n"); + fprintf(stdout, + " User can end the h5watch process by ctrl-C (SIGINT) or kill the process (SIGTERM).\n"); } /* usage() */ @@ -732,7 +731,7 @@ parse_command_line(int argc, const char *const *argv) error_msg("memory allocation failed (file %s:line %d)\n", __FILE__, __LINE__); leave(EXIT_FAILURE); } - if ((g_list_of_fields = (char *)HDrealloc( + if ((g_list_of_fields = (char *)realloc( g_list_of_fields, HDstrlen(g_list_of_fields) + HDstrlen(str) + 2)) == NULL) { error_msg("memory allocation failed (file %s:line %d)\n", __FILE__, __LINE__); leave(EXIT_FAILURE); @@ -868,7 +867,7 @@ main(int argc, char *argv[]) sizeof drivername); if (fid >= 0) { - HDfprintf(stdout, "Opened \"%s\" with %s driver.\n", fname, drivername); + fprintf(stdout, "Opened \"%s\" with %s driver.\n", fname, drivername); break; /*success*/ } /* end if */ @@ -928,17 +927,17 @@ main(int argc, char *argv[]) done: /* Free spaces */ if (fname) - HDfree(fname); + free(fname); if (dname) - HDfree(dname); + free(dname); if (g_list_of_fields) - HDfree(g_list_of_fields); + free(g_list_of_fields); if (g_listv) { H5LD_clean_vector(g_listv); - HDfree(g_listv); + free(g_listv); } if (g_dup_fields) - HDfree(g_dup_fields); + free(g_dup_fields); /* Close the file access property list */ if (fapl >= 0 && H5Pclose(fapl) < 0) { |