summaryrefslogtreecommitdiffstats
path: root/hl/tools
diff options
context:
space:
mode:
Diffstat (limited to 'hl/tools')
-rw-r--r--hl/tools/h5watch/CMakeTests.cmake59
-rw-r--r--hl/tools/h5watch/testh5watch.sh.in119
-rw-r--r--hl/tools/testfiles/w-err-cmpd1.err1
-rw-r--r--hl/tools/testfiles/w-err-cmpd2.err1
-rw-r--r--hl/tools/testfiles/w-err-cmpd3.err1
-rw-r--r--hl/tools/testfiles/w-err-cmpd4.err1
-rw-r--r--hl/tools/testfiles/w-err-cmpd5.err1
-rw-r--r--hl/tools/testfiles/w-err-dset-nomax.err1
-rw-r--r--hl/tools/testfiles/w-err-dset-none.err1
-rw-r--r--hl/tools/testfiles/w-err-dset1.err1
-rw-r--r--hl/tools/testfiles/w-err-dset2.err (renamed from hl/tools/testfiles/w-err-dset2.ddl)1
-rw-r--r--hl/tools/testfiles/w-err-file.err (renamed from hl/tools/testfiles/w-err-file.ddl)0
-rw-r--r--hl/tools/testfiles/w-err-std.ddl2
13 files changed, 132 insertions, 57 deletions
diff --git a/hl/tools/h5watch/CMakeTests.cmake b/hl/tools/h5watch/CMakeTests.cmake
index 0b7b4d4..13d5e47 100644
--- a/hl/tools/h5watch/CMakeTests.cmake
+++ b/hl/tools/h5watch/CMakeTests.cmake
@@ -18,16 +18,16 @@
set (H5WATCH_TEST_FILES
w-help1.ddl
- w-err-cmpd1.ddl
- w-err-cmpd2.ddl
- w-err-cmpd3.ddl
- w-err-cmpd4.ddl
- w-err-cmpd5.ddl
- w-err-dset1.ddl
- w-err-dset2.ddl
- w-err-dset-nomax.ddl
- w-err-dset-none.ddl
- w-err-file.ddl
+ w-err-cmpd1.err
+ w-err-cmpd2.err
+ w-err-cmpd3.err
+ w-err-cmpd4.err
+ w-err-cmpd5.err
+ w-err-dset1.err
+ w-err-dset2.err
+ w-err-dset-nomax.err
+ w-err-dset-none.err
+ w-err-file.err
w-err-poll.ddl
w-err-poll0.ddl
w-err-width.ddl
@@ -86,6 +86,25 @@ add_custom_target(H5WATCH_files ALL COMMENT "Copying files needed by H5WATCH tes
endif ()
endmacro ()
+ macro (ADD_H5_ERR_TEST resultfile resultcode)
+ if (NOT HDF5_ENABLE_USING_MEMCHECKER)
+ add_test (
+ NAME H5WATCH_ARGS-h5watch-${resultfile}
+ COMMAND "${CMAKE_COMMAND}"
+ -D "TEST_PROGRAM=$<TARGET_FILE:h5watch>"
+ -D "TEST_ARGS:STRING=${ARGN}"
+ -D "TEST_FOLDER=${PROJECT_BINARY_DIR}/testfiles"
+ -D "TEST_OUTPUT=${resultfile}.out"
+ -D "TEST_EXPECT=${resultcode}"
+ -D "TEST_REFERENCE=${resultfile}.mty"
+ -D "TEST_ERRREF=${resultfile}.err"
+ -P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
+ )
+ set_tests_properties (H5WATCH_ARGS-h5watch-${resultfile} PROPERTIES DEPENDS ${last_test})
+ set (last_test "H5WATCH_ARGS-h5watch-${resultfile}")
+ endif ()
+ endmacro ()
+
macro (ADD_H5_WATCH resultfile resultcode)
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
@@ -162,20 +181,20 @@ if (NOT SWMR_INCOMPAT)
ADD_H5_TEST (w-help1 0 --help)
#
# Tests on expected failures
- ADD_H5_TEST (w-err-dset1 1 WATCH.h5)
- ADD_H5_TEST (w-err-dset2 1 WATCH.h5/group/DSET_CMPD)
- ADD_H5_TEST (w-err-dset-none 1 WATCH.h5/DSET_NONE)
- ADD_H5_TEST (w-err-dset-nomax 1 WATCH.h5/DSET_NOMAX)
- ADD_H5_TEST (w-err-file 1 ../WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-dset1 1 WATCH.h5)
+ ADD_H5_ERR_TEST (w-err-dset2 1 WATCH.h5/group/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-dset-none 1 WATCH.h5/DSET_NONE)
+ ADD_H5_ERR_TEST (w-err-dset-nomax 1 WATCH.h5/DSET_NOMAX)
+ ADD_H5_ERR_TEST (w-err-file 1 ../WATCH.h5/DSET_CMPD)
ADD_H5_TEST (w-err-width 1 --width=-8 WATCH.h5/DSET_ONE)
ADD_H5_TEST (w-err-poll 1 --polling=-8 WATCH.h5/DSET_ONE)
ADD_H5_TEST (w-err-poll0 1 --polling=0 WATCH.h5/DSET_ONE)
#
# Tests on invalid field names via --fields option for a compound typed dataset: DSET_CMPD
- ADD_H5_TEST (w-err-cmpd1 1 --fields=fieldx WATCH.h5/DSET_CMPD)
- ADD_H5_TEST (w-err-cmpd2 1 --fields=field1,field2. WATCH.h5/DSET_CMPD)
- ADD_H5_TEST (w-err-cmpd3 1 --fields=field1,field2, WATCH.h5/DSET_CMPD)
- ADD_H5_TEST (w-err-cmpd4 1 --fields=field1,field2.b.k WATCH.h5/DSET_CMPD)
- ADD_H5_TEST (w-err-cmpd5 1 --fields=field1 --fields=field2.b.k WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-cmpd1 1 --fields=fieldx WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-cmpd2 1 --fields=field1,field2. WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-cmpd3 1 --fields=field1,field2, WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-cmpd4 1 --fields=field1,field2.b.k WATCH.h5/DSET_CMPD)
+ ADD_H5_ERR_TEST (w-err-cmpd5 1 --fields=field1 --fields=field2.b.k WATCH.h5/DSET_CMPD)
#
endif ()
diff --git a/hl/tools/h5watch/testh5watch.sh.in b/hl/tools/h5watch/testh5watch.sh.in
index 3f8f5ae..d31bcc3 100644
--- a/hl/tools/h5watch/testh5watch.sh.in
+++ b/hl/tools/h5watch/testh5watch.sh.in
@@ -32,19 +32,19 @@ fi
#echo
#exit 0
-H5WATCH=h5watch # The tool name
-H5WATCH_BIN=`pwd`/$H5WATCH # The path of H5WATCH
-EXTEND_DSET=extend_dset # Routine to extend the dataset when watching
-EXTEND_BIN=`pwd`/$EXTEND_DSET # The path of EXTEND_DSET
+H5WATCH=h5watch # The tool name
+H5WATCH_BIN=`pwd`/$H5WATCH # The path of H5WATCH
+EXTEND_DSET=extend_dset # Routine to extend the dataset when watching
+EXTEND_BIN=`pwd`/$EXTEND_DSET # The path of EXTEND_DSET
#
EXIT_SUCCESS=0
EXIT_FAILURE=1
#
-GEN_TEST=h5watchgentest # Generate HDF5 file with various datasets
-GEN_TEST_BIN=`pwd`/$GEN_TEST # Path of the binary GEN_TEST
+GEN_TEST=h5watchgentest # Generate HDF5 file with various datasets
+GEN_TEST_BIN=`pwd`/$GEN_TEST # Path of the binary GEN_TEST
WATCHFILE=`pwd`/WATCH.h5 # The HDF5 file generated to test h5watch
TESTFILE=TEST.h5 # The temporary file (a copy of WATCH.h5) used by tests
-TRY_MAX=30 # Try running the test again
+TRY_MAX=30 # Try running the test again
#
# These 3 defines should be the same as the defines in ./extend_dset.c
WRITER_MESSAGE=writer_message # The message file created by the "extend" process
@@ -53,7 +53,7 @@ MESSAGE_TIMEOUT=300 # Message timeout length in secs
#
CMP='cmp -s'
DIFF='diff -c'
-NLINES=20 # Max. lines of output to display if test fails
+NLINES=20 # Max. lines of output to display if test fails
#
# Mac OS: just to make sure echo "backslash backslash" behaves properly
if test `uname -s` = 'Darwin'; then
@@ -83,9 +83,9 @@ TESTING() {
# Overall algorithm:
#
# Run a test and print PASSED or FAILED
-# If a test did not return with the expected return code,
+# If a test did not return with the expected return code,
# increment the `nerrors' global variable and (if $verbose is set) display up to $NLINES
-# lines of the actual output from the test.
+# lines of the actual output from the test.
# If the test did return the expected code,
# compare the actual output with the expected output;
# If the outputs are the same, print PASSED,
@@ -137,7 +137,54 @@ TOOLTEST() {
# Clean up output file
if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actual $actual_err
+ rm -f $actual $actual_err
+ fi
+}
+#
+# TOOLTEST_ERR():
+# same as toolset only compare error file
+#
+# Arguments:
+#
+# $1 -- expected output
+# $2 -- expected return code
+# $3 and on -- arguments for h5watch
+TOOLTEST_ERR() {
+ expect="$srcdir/../testfiles/$1"
+ expect_err="$srcdir/../testfiles/`basename $1 .ddl`.err"
+ actual="../testfiles/`basename $1 .ddl`.out"
+ actual_err="../testfiles/`basename $1 .ddl`.out.err"
+ shift
+ retvalexpect=$1
+ shift
+ # Run test.
+ TESTING $H5WATCH $@
+ (
+ $RUNSERIAL $H5WATCH_BIN "$@"
+ ) > $actual 2>$actual_err
+ exitcode=$?
+ if [ $exitcode -ne $retvalexpect ]; then
+ $ECHO "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
+ if [ yes = "$verbose" ]; then
+ $ECHO "test returned with exit code $exitcode"
+ $ECHO "test output: (up to $NLINES lines)"
+ head -$NLINES $actual
+ $ECHO "***end of test output***"
+ $ECHO ""
+ fi
+ elif $CMP $expect_err $actual_err; then
+ $ECHO " PASSED"
+ else
+ $ECHO "*FAILED*"
+ $ECHO " Expected result differs from actual result"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect_err $actual_err |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actual_err
fi
}
@@ -176,15 +223,15 @@ do
# Wait for message from "extend_dset" process to start h5watch--
# To wait for the writer message file or till the maximum # of seconds is reached
# This performs similar function as the routine h5_wait_message() in test/h5test.c
- mexist=0 # Indicate whether the message file is found
- t0=`date +%s` # Get current time in seconds
- difft=0 # Initialize the time difference
- while [ $difft -lt $MESSAGE_TIMEOUT ] ; # Loop till message times out
+ mexist=0 # Indicate whether the message file is found
+ t0=`date +%s` # Get current time in seconds
+ difft=0 # Initialize the time difference
+ while [ $difft -lt $MESSAGE_TIMEOUT ] ; # Loop till message times out
do
- t1=`date +%s` # Get current time in seconds
- difft=`expr $t1 - $t0` # Calculate the time difference
+ t1=`date +%s` # Get current time in seconds
+ difft=`expr $t1 - $t0` # Calculate the time difference
if [ -e $WRITER_MESSAGE ]; then # If message file is found:
- mexist=1 # indicate the message file is found
+ mexist=1 # indicate the message file is found
rm $WRITER_MESSAGE # remove the message file
break # get out of the while loop
fi
@@ -211,8 +258,8 @@ do
wait $extend_pid # Wait for "extend" process to complete
extend_exit=$? # Collect "extend" process' exit code
sleep 1 # Sleep to make sure output is flushed
- kill $watch_pid # Kill h5watch
- wait $watch_pid # Wait for "h5watch" process to complete
+ kill $watch_pid # Kill h5watch
+ wait $watch_pid # Wait for "h5watch" process to complete
#
if [ $extend_exit -ne 0 ]; then # Error returned from "extend" process
$ECHO "*FAILED*"
@@ -265,7 +312,7 @@ done;
# DSET_ONE: one-dimensional dataset #
# DSET_TWO: two-dimensional dataset #
# DSET_CMPD: one-dimensional dataset with compound type #
-# DSET_CMPD_ESC: one-dimensional dataset with compound type & escape/separator characters #
+# DSET_CMPD_ESC: one-dimensional dataset with compound type & escape/separator characters #
# DSET_CMPD_TWO: two-dimensional dataset with compound type #
# #
# The following datasets are one-dimensional, chunked, max. dimension setting: #
@@ -282,11 +329,11 @@ done;
#################################################################################################
# #
# Tests on expected failures: #
-# Invalid file name #
-# Unable to find dataset, invalid dataset #
-# DSET_NONE and DSET_NOMAX #
-# Invalid input to options --width and --polling #
-# Invalid field names for -f option #
+# Invalid file name #
+# Unable to find dataset, invalid dataset #
+# DSET_NONE and DSET_NOMAX #
+# Invalid input to options --width and --polling #
+# Invalid field names for -f option #
# #
#################################################################################################
#
@@ -296,21 +343,21 @@ $GEN_TEST_BIN
TOOLTEST w-help1.ddl 0 --help
#
# Tests on expected failures
-TOOLTEST w-err-dset1.ddl 1 WATCH.h5
-TOOLTEST w-err-dset2.ddl 1 WATCH.h5/group/DSET_CMPD
-TOOLTEST w-err-dset-none.ddl 1 WATCH.h5/DSET_NONE
-TOOLTEST w-err-dset-nomax.ddl 1 WATCH.h5/DSET_NOMAX
-TOOLTEST w-err-file.ddl 1 ../WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-dset1.ddl 1 WATCH.h5
+TOOLTEST_ERR w-err-dset2.ddl 1 WATCH.h5/group/DSET_CMPD
+TOOLTEST_ERR w-err-dset-none.ddl 1 WATCH.h5/DSET_NONE
+TOOLTEST_ERR w-err-dset-nomax.ddl 1 WATCH.h5/DSET_NOMAX
+TOOLTEST_ERR w-err-file.ddl 1 ../WATCH.h5/DSET_CMPD
TOOLTEST w-err-width.ddl 1 --width=-8 WATCH.h5/DSET_ONE
TOOLTEST w-err-poll.ddl 1 --polling=-8 WATCH.h5/DSET_ONE
TOOLTEST w-err-poll0.ddl 1 --polling=0 WATCH.h5/DSET_ONE
#
# Tests on invalid field names via --fields option for a compound typed dataset: DSET_CMPD
-TOOLTEST w-err-cmpd1.ddl 1 --fields=fieldx WATCH.h5/DSET_CMPD
-TOOLTEST w-err-cmpd2.ddl 1 --fields=field1,field2. WATCH.h5/DSET_CMPD
-TOOLTEST w-err-cmpd3.ddl 1 --fields=field1,field2, WATCH.h5/DSET_CMPD
-TOOLTEST w-err-cmpd4.ddl 1 --fields=field1,field2.b.k WATCH.h5/DSET_CMPD
-TOOLTEST w-err-cmpd5.ddl 1 --fields=field1 --fields=field2.b.k WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-cmpd1.ddl 1 --fields=fieldx WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-cmpd2.ddl 1 --fields=field1,field2. WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-cmpd3.ddl 1 --fields=field1,field2, WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-cmpd4.ddl 1 --fields=field1,field2.b.k WATCH.h5/DSET_CMPD
+TOOLTEST_ERR w-err-cmpd5.ddl 1 --fields=field1 --fields=field2.b.k WATCH.h5/DSET_CMPD
#
echo "DONE WITH 1st SET OF TESTS"
#
diff --git a/hl/tools/testfiles/w-err-cmpd1.err b/hl/tools/testfiles/w-err-cmpd1.err
new file mode 100644
index 0000000..9c165fb
--- /dev/null
+++ b/hl/tools/testfiles/w-err-cmpd1.err
@@ -0,0 +1 @@
+h5watch error: error in processing <list_of_fields>
diff --git a/hl/tools/testfiles/w-err-cmpd2.err b/hl/tools/testfiles/w-err-cmpd2.err
new file mode 100644
index 0000000..9c165fb
--- /dev/null
+++ b/hl/tools/testfiles/w-err-cmpd2.err
@@ -0,0 +1 @@
+h5watch error: error in processing <list_of_fields>
diff --git a/hl/tools/testfiles/w-err-cmpd3.err b/hl/tools/testfiles/w-err-cmpd3.err
new file mode 100644
index 0000000..9c165fb
--- /dev/null
+++ b/hl/tools/testfiles/w-err-cmpd3.err
@@ -0,0 +1 @@
+h5watch error: error in processing <list_of_fields>
diff --git a/hl/tools/testfiles/w-err-cmpd4.err b/hl/tools/testfiles/w-err-cmpd4.err
new file mode 100644
index 0000000..9c165fb
--- /dev/null
+++ b/hl/tools/testfiles/w-err-cmpd4.err
@@ -0,0 +1 @@
+h5watch error: error in processing <list_of_fields>
diff --git a/hl/tools/testfiles/w-err-cmpd5.err b/hl/tools/testfiles/w-err-cmpd5.err
new file mode 100644
index 0000000..9c165fb
--- /dev/null
+++ b/hl/tools/testfiles/w-err-cmpd5.err
@@ -0,0 +1 @@
+h5watch error: error in processing <list_of_fields>
diff --git a/hl/tools/testfiles/w-err-dset-nomax.err b/hl/tools/testfiles/w-err-dset-nomax.err
new file mode 100644
index 0000000..fd5ca7e
--- /dev/null
+++ b/hl/tools/testfiles/w-err-dset-nomax.err
@@ -0,0 +1 @@
+h5watch error: "/DSET_NOMAX" should have unlimited or max. dimension setting
diff --git a/hl/tools/testfiles/w-err-dset-none.err b/hl/tools/testfiles/w-err-dset-none.err
new file mode 100644
index 0000000..db781c3
--- /dev/null
+++ b/hl/tools/testfiles/w-err-dset-none.err
@@ -0,0 +1 @@
+h5watch error: "/DSET_NONE" should be a chunked or virtual dataset
diff --git a/hl/tools/testfiles/w-err-dset1.err b/hl/tools/testfiles/w-err-dset1.err
new file mode 100644
index 0000000..d6b2a6e
--- /dev/null
+++ b/hl/tools/testfiles/w-err-dset1.err
@@ -0,0 +1 @@
+h5watch error: no dataset specified
diff --git a/hl/tools/testfiles/w-err-dset2.ddl b/hl/tools/testfiles/w-err-dset2.err
index 81b52de..3f77ec8 100644
--- a/hl/tools/testfiles/w-err-dset2.ddl
+++ b/hl/tools/testfiles/w-err-dset2.err
@@ -1,2 +1 @@
-Opened "WATCH.h5" with sec2 driver.
h5watch error: unable to open dataset "/group/DSET_CMPD"
diff --git a/hl/tools/testfiles/w-err-file.ddl b/hl/tools/testfiles/w-err-file.err
index 015661f..015661f 100644
--- a/hl/tools/testfiles/w-err-file.ddl
+++ b/hl/tools/testfiles/w-err-file.err
diff --git a/hl/tools/testfiles/w-err-std.ddl b/hl/tools/testfiles/w-err-std.ddl
new file mode 100644
index 0000000..775d6a0
--- /dev/null
+++ b/hl/tools/testfiles/w-err-std.ddl
@@ -0,0 +1,2 @@
+Opened "WATCH.h5" with sec2 driver.
+h5watch error: error in processing <list_of_fields>
generated by cgit v0.12 at 2024-11-21 20:14:41 (GMT)