summaryrefslogtreecommitdiffstats
path: root/hl
diff options
context:
space:
mode:
Diffstat (limited to 'hl')
-rwxr-xr-xhl/Makefile.in68
-rw-r--r--hl/c++/Makefile.in68
-rw-r--r--hl/c++/src/Makefile.in68
-rw-r--r--hl/c++/test/Makefile.in68
-rw-r--r--hl/fortran/Makefile.in68
-rw-r--r--hl/fortran/src/Makefile.in68
-rw-r--r--hl/fortran/test/Makefile.in68
-rw-r--r--hl/src/Makefile.in68
-rw-r--r--hl/test/Makefile.in67
-rw-r--r--hl/tools/gif2h5/Makefile.in68
10 files changed, 529 insertions, 150 deletions
diff --git a/hl/Makefile.in b/hl/Makefile.in
index 91f1ddc..5e6b384 100755
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -277,7 +277,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
@BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test $(CXX_DIR) $(FORTRAN_DIR)
@@ -610,16 +619,24 @@ uninstall-info: uninstall-info-recursive
tags tags-recursive uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -631,6 +648,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -659,8 +678,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -668,26 +694,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -695,21 +727,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in
index 801b497..b5fb124 100644
--- a/hl/c++/Makefile.in
+++ b/hl/c++/Makefile.in
@@ -282,7 +282,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
SUBDIRS = src test
# Automake needs to be taught how to build lib, progs, and tests targets.
@@ -613,16 +622,24 @@ uninstall-info: uninstall-info-recursive
tags tags-recursive uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -634,6 +651,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -662,8 +681,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -671,26 +697,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -698,21 +730,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
index b965230..e6b857f 100644
--- a/hl/c++/src/Makefile.in
+++ b/hl/c++/src/Makefile.in
@@ -304,7 +304,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
# Include src directory
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src
@@ -635,16 +644,24 @@ uninstall-am: uninstall-includeHEADERS uninstall-info-am \
uninstall-info-am uninstall-libLTLIBRARIES
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -656,6 +673,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -684,8 +703,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -693,26 +719,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -720,21 +752,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in
index c044eef..efce9d9 100644
--- a/hl/c++/test/Makefile.in
+++ b/hl/c++/test/Makefile.in
@@ -298,7 +298,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
# Include directories
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_srcdir)/hl/c++/src -I$(top_srcdir)/test
@@ -584,16 +593,24 @@ uninstall-am: uninstall-info-am
tags uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -605,6 +622,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -633,8 +652,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -642,26 +668,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -669,21 +701,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index bfef25d..f58bf2f 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -277,7 +277,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
SUBDIRS = src test
# Automake needs to be taught how to build lib, progs, and tests targets.
@@ -608,16 +617,24 @@ uninstall-info: uninstall-info-recursive
tags tags-recursive uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -629,6 +646,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -657,8 +676,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -666,26 +692,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -693,21 +725,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 40205f9..e945d4e 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -298,7 +298,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \
-I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src
@@ -626,6 +635,12 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
uninstall-libLTLIBRARIES uninstall-local
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
#libhdf5hl_fortran_la_LIBADD=$(LIBH5_HL)
# Fortran module files can have different extensions and different names
@@ -661,14 +676,16 @@ H5TBff.lo: $(srcdir)/H5TBff.f90
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -680,6 +697,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -708,8 +727,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -717,26 +743,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -744,21 +776,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index afbcd3a..594253a 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -297,9 +297,18 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
# Temporary files.
-MOSTLYCLEANFILES = *.chkexe *.chksh dsetf[1-4].h5 f1img.h5 f1tab.h5
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) dsetf[1-4].h5 f1img.h5 \
+ f1tab.h5
AM_CPPFLAGS = -I$(top_srcdir)/src -I$(top_builddir)/src -I$(top_srcdir)/hl/src
AM_FCFLAGS = -I$(top_builddir)/fortran/src -I$(top_builddir)/hl/fortran/src $(F9XMODFLAG)$(top_builddir)/fortran/src $(F9XMODFLAG)$(top_builddir)/hl/fortran/src
@@ -575,16 +584,24 @@ uninstall-am: uninstall-info-am
tags uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -596,6 +613,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -624,8 +643,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -633,26 +659,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -660,21 +692,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index 4668a19..56a47b8 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -295,7 +295,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
# Add include directories to the C preprocessor flags
AM_CPPFLAGS = -I$(top_srcdir)/src
@@ -623,16 +632,24 @@ uninstall-am: uninstall-includeHEADERS uninstall-info-am \
uninstall-info-am uninstall-libLTLIBRARIES
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -644,6 +661,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -672,8 +691,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -681,26 +707,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -708,21 +740,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index 64b32a4..0e9ee01 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -307,9 +307,17 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
# Temporary files. These files are the ones created by running `make test'.
-MOSTLYCLEANFILES = *.chkexe *.chksh combine_tables[1-2].h5 \
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) combine_tables[1-2].h5 \
test_ds[1-6].h5 test_image[1-3].h5 test_lite[1-2].h5 \
test_table.h5 test_packet_table.h5
@@ -609,16 +617,24 @@ uninstall-am: uninstall-info-am
tags uninstall uninstall-am uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -630,6 +646,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -658,8 +676,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -667,26 +692,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -694,21 +725,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index 20ff80b..b5b639d 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -305,7 +305,16 @@ H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files. It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \
+ $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \
+ $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
# Include src and tools/lib directories
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib
@@ -618,16 +627,24 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
uninstall-info-am
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
lib progs tests check-s check-p ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
- if test $$d != X -a $$d != .; then \
+ if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
@@ -639,6 +656,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
@@ -667,8 +686,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+ @for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log) \
+ $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do \
+ if test $$d != dummy && test $$d != .log && \
+ test $$d != .logsh; then \
+ cat `basename $$d`; \
+ fi; \
+ done
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -676,26 +702,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
else \
+ echo "============================" > $(@:.chkexe_=.log); \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
else \
echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+ echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
fi; \
- echo "============================"; \
+ echo "============================" >> $(@:.chkexe_=.log); \
srcdir="$(srcdir)" \
- $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat $(@:.chkexe_=.log) && false) || exit 1; \
+ echo "" >> $(@:.chkexe_=.log); \
+ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+ echo "============================" >> $(@:.chkexe_=.log); \
echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
fi
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -703,21 +735,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
echo "No need to test `basename $(@:.chksh_=)` again."; \
else \
+ echo "============================" > `basename $(@:.chksh_=.logsh)`; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
else \
echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+ echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
fi; \
- echo "============================"; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
- $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
&& touch `basename $(@:.chksh_=.chksh)` || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
- exit 1; \
- echo ""; \
+ (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+ echo "" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+ echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
fi; \
echo "============================"; \