diff options
Diffstat (limited to 'pablo/HDFIOTrace.h')
| -rw-r--r-- | pablo/HDFIOTrace.h | 423 |
1 files changed, 0 insertions, 423 deletions
diff --git a/pablo/HDFIOTrace.h b/pablo/HDFIOTrace.h deleted file mode 100644 index 4c88403..0000000 --- a/pablo/HDFIOTrace.h +++ /dev/null @@ -1,423 +0,0 @@ -/* - * This file is part of the Pablo Performance Analysis Environment - * - * (R) - * The Pablo Performance Analysis Environment software is NOT in - * the public domain. However, it is freely available without fee for - * education, research, and non-profit purposes. By obtaining copies - * of this and other files that comprise the Pablo Performance Analysis - * Environment, you, the Licensee, agree to abide by the following - * conditions and understandings with respect to the copyrighted software: - * - * 1. The software is copyrighted in the name of the Board of Trustees - * of the University of Illinois (UI), and ownership of the software - * remains with the UI. - * - * 2. Permission to use, copy, and modify this software and its documentation - * for education, research, and non-profit purposes is hereby granted - * to Licensee, provided that the copyright notice, the original author's - * names and unit identification, and this permission notice appear on - * all such copies, and that no charge be made for such copies. Any - * entity desiring permission to incorporate this software into commercial - * products should contact: - * - * Professor Daniel A. Reed reed@cs.uiuc.edu - * University of Illinois - * Department of Computer Science - * 2413 Digital Computer Laboratory - * 1304 West Springfield Avenue - * Urbana, Illinois 61801 - * USA - * - * 3. Licensee may not use the name, logo, or any other symbol of the UI - * nor the names of any of its employees nor any adaptation thereof in - * advertizing or publicity pertaining to the software without specific - * prior written approval of the UI. - * - * 4. THE UI MAKES NO REPRESENTATIONS ABOUT THE SUITABILITY OF THE - * SOFTWARE FOR ANY PURPOSE. IT IS PROVIDED "AS IS" WITHOUT EXPRESS - * OR IMPLIED WARRANTY. - * - * 5. The UI shall not be liable for any damages suffered by Licensee from - * the use of this software. - * - * 6. The software was developed under agreements between the UI and the - * Federal Government which entitle the Government to certain rights. - * - ************************************************************************** - * - * Developed by: The Pablo Research Group - * University of Illinois at Urbana-Champaign - * Department of Computer Science - * 1304 W. Springfield Avenue - * Urbana, IL 61801 - * - * http://www-pablo.cs.uiuc.edu - * - * Send comments to: pablo-feedback@guitar.cs.uiuc.edu - * - * Copyright (c) 1991-1996 - * The University of Illinois Board of Trustees. - * All Rights Reserved. - * - * PABLO is a registered trademark of - * The Board of Trustees of the University of Illinois - * registered in the U.S. Patent and Trademark Office. - * - * Author: Ruth A. Aydt (aydt@cs.uiuc.edu) - * Author: Tara M. Madhyastha (tara@cs.uiuc.edu) - * - * Project Manager and Principal Investigator: - * Daniel A. Reed (reed@cs.uiuc.edu) - * - * Funded in part by National Science Foundation grants NSF CCR87-06653 - * and NSF CDA87-22836 (Tapestry), DARPA contracts DABT63-91-K-0004, - * DABT63-93-C-0040, DABT63-94-C-0049 (SIO), and F30602-96-C-0161, NASA - * contracts NAG-1-613 (ICLASS), USRA 5555-22, and NGT-51023, and a - * collaborative research agreement with the Intel Supercomputer - * Systems Division - */ - -/* - * HDFIOTrace.h: This header file can be included in c source files to - * automatically redefine the I/O function calls to the - * tracing versions when "IOTRACE" is defined. - * - * It also contains function declarations for the I/O trace - * routines called from user code and constant values that may - * be needed by the user. - * - */ -#ifndef HDFIOTrace_h -#define HDFIOTrace_h - - -/************************************************************************/ -/* These defines and the external variable OUTPUT_SWITCH are used in */ -/* for HDF and MPI-IO tracing to govern the type of output produced. */ -/************************************************************************/ -extern int OUTPUT_SWITCH; /* default is SDDF records */ - -#if defined(__STDC__) || defined(__cplusplus) -#define PROTO(x) x -#else -#define PROTO(x) () -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -/* #include <stdio.h> */ -#include <sys/types.h> - -void startHDFtraceEvent (int ); -void endHDFtraceEvent (int , int , char *, int ); - -FILE *HDFtraceFOPEN( const char *filename, const char *type ) ; -#ifndef HDFtrace3OPEN__ - int HDFtrace3OPEN( const char *path, int flags, ... ) ; -#endif -int HDFtraceCREAT( const char *path, mode_t mode ); -int HDFtraceFFLUSH( FILE *stream ) ; -int HDFtraceFCLOSE( FILE *stream ) ; -int HDFtraceCLOSE( int fd ) ; -ssize_t HDFtraceREAD( int fd, void *buf, size_t nbyte ); -size_t HDFtraceFREAD( void *ptr, size_t size, size_t nitems, FILE *stream ); -void *HDFtraceMALLOC( size_t ); -off_t HDFtraceLSEEK( int fd, off_t offset, int whence ) ; -int HDFtraceFSEEK( FILE *stream, long offset, int whence ) ; -int HDFtraceFSETPOS( FILE *stream, const fpos_t *position ) ; -void HDFtraceREWIND( FILE *stream ) ; -ssize_t HDFtraceWRITE( int fd, const void *buf, size_t nbytes ); -size_t HDFtraceFWRITE( const void *, size_t , size_t , FILE * ); -int HDFtracePUTS( const char *s ) ; -int HDFtraceFPUTC( int c, FILE *stream ) ; -int HDFtraceFPUTS( const char *s, FILE *stream ) ; - -#ifdef HDFIOTRACE -/* - * If IOTRACE is defined, then redefine standard I/O routines to tracing - * versions. Also include the appropriate .h files so the function - * declarations from them will be redefined to traced versions. - */ - -#ifdef fopen -# undef fopen -#endif -#ifdef open -# undef open -#endif -#ifdef creat -# undef creat -#endif - -#ifdef fflush -# undef fflush -#endif -#ifdef fclose -# undef fclose -#endif -#ifdef close -# undef close -#endif - -#ifdef read -# undef read -#endif -#ifdef fread -# undef fread -#endif -#ifdef fgetc -# undef fgetc -#endif -#ifdef fgets -# undef fgets -#endif -#ifdef gets -# undef gets -#endif -#ifdef getw -# undef getw -#endif - -#ifdef lseek -# undef lseek -#endif -#ifdef fseek -# undef fseek -#endif -#ifdef rewind -# undef rewind -#endif -#ifdef fsetpos -# undef fsetpos -#endif - -#ifdef write -# undef write -#endif -#ifdef fwrite -# undef fwrite -#endif -#ifdef fputc -# undef fputc -#endif -#ifdef fputs -# undef fputs -#endif -#ifdef puts -# undef puts -#endif -#ifdef putw -# undef putw -#endif - -#ifdef malloc -# undef malloc -#endif - -#define fopen (FILE *)HDFtraceFOPEN -#define open HDFtrace3OPEN -#define creat HDFtraceCREAT - -#define fflush HDFtraceFFLUSH -#define fclose HDFtraceFCLOSE -#define close HDFtraceCLOSE - -#define read HDFtraceREAD -#define fread HDFtraceFREAD -#define fgetc HDFtraceFGETC -#define fgets HDFtraceFGETS -#define gets HDFtraceGETS -#define getw HDFtraceGETW - -#define lseek HDFtraceLSEEK -#define fseek HDFtraceFSEEK -#define rewind HDFtraceREWIND -#define fsetpos HDFtraceFSETPOS - -#define write HDFtraceWRITE -#define fwrite HDFtraceFWRITE -#define fputc HDFtraceFPUTC -#define fputs HDFtraceFPUTS -#define puts HDFtracePUTS -#define putw HDFtracePUTW - -#define malloc HDFtraceMALLOC - -#include <stdio.h> -#include <fcntl.h> - -/* - * On the iPSC/860 we don't include unistd.h or we get warnings about - * SEEK_* multiply defined. - */ -#ifndef __NX -#include <unistd.h> -#endif - - -#include <stdio.h> -/* - * Function declarations for routines that can be called from user code. - */ -void enableIOtracing( void ); -void disableIOtracing( void ); - -void enableIOdetail( void ); -void disableIOdetail( void ); - -void enableLifetimeSummaries( void ); -void disableLifetimeSummaries( void ); - -void enableTimeWindowSummaries ( double ); -void disableTimeWindowSummaries( void ); -void setTimeWindowSize ( double ); -void outputTimeWindowSummaries( void ); - -void enableFileRegionSummaries ( int ); -void disableFileRegionSummaries( void ); -void setFileRegionSize ( int ); -void outputFileRegionSummaries( void ); - -int HDFtrace2OPEN ( char*, int ); -void HDFtraceReadBegin ( int, int, int ); -void HDFtraceReadEnd ( int ); -void HDFtraceWriteBegin ( int, int, int ); -void HDFtraceWriteEnd ( int ); -void HDFtraceIOBegin ( int, int ); -void HDFtraceIOEnd ( int, double, char * ); - -#ifdef H5_HAVE_PARALLEL - -#include "HDFmpioProtos.h" - -/* -#ifdef MPI_File_open -#undef MPI_File_open -#endif -#ifdef MPI_File_close -#undef MPI_File_close -#endif -#ifdef MPI_File_delete -#undef MPI_File_delete -#endif -#ifdef MPI_File_set_size -#undef MPI_File_set_size -#endif -#ifdef MPI_File_preallocate -#undef MPI_File_preallocate -#endif -#ifdef MPI_File_get_size -#undef MPI_File_get_size -#endif -#ifdef MPI_File_get_group -#undef MPI_File_get_group -#endif -#ifdef MPI_File_get_amode -#undef MPI_File_get_amode -#endif -#ifdef MPI_File_set_view -#undef MPI_File_set_view -#endif -#ifdef MPI_File_get_view -#undef MPI_File_get_view -#endif -#ifdef MPI_File_read_at -#undef MPI_File_read_at -#endif -#ifdef MPI_File_read_at_all -#undef MPI_File_read_at_all -#endif -#ifdef MPI_File_write_at -#undef MPI_File_write_at -#endif -#ifdef MPI_File_write_at_all -#undef MPI_File_write_at_all -#endif -#ifdef MPI_File_iread_at -#undef MPI_File_iread_at -#endif -#ifdef MPI_File_iwrite_at -#undef MPI_File_iwrite_at -#endif -#ifdef MPI_File_read -#undef MPI_File_read -#endif -#ifdef MPI_File_read_all -#undef MPI_File_read_all -#endif -#ifdef MPI_File_write -#undef MPI_File_write -#endif -#ifdef MPI_File_write_all -#undef MPI_File_write_all -#endif -#ifdef MPI_File_iread -#undef MPI_File_iread -#endif -#ifdef MPI_File_iwrite -#undef MPI_File_iwrite -#endif -#ifdef MPI_File_seek -#undef MPI_File_seek -#endif -#ifdef MPI_File_get_position -#undef MPI_File_get_position -#endif -#ifdef MPI_File_get_byte_offset -#undef MPI_File_get_byte_offset -#endif -#ifdef MPI_File_get_type_extent -#undef MPI_File_get_type_extent -#endif -#ifdef MPI_File_set_atomicity -#undef MPI_File_set_atomicity -#endif -#ifdef MPI_File_get_atomicity -#undef MPI_File_get_atomicity -#endif -#ifdef MPI_File_sync -#undef MPI_File_sync -#endif - -#define MPI_File_open HDF_MPI_File_open -#define MPI_File_close HDF_MPI_File_close -#define MPI_File_delete HDF_MPI_File_delete -#define MPI_File_set_size HDF_MPI_File_set_size -#define MPI_File_preallocate HDF_MPI_File_preallocate -#define MPI_File_get_size HDF_MPI_File_get_size -#define MPI_File_get_group HDF_MPI_File_get_group -#define MPI_File_get_amode HDF_MPI_File_get_amode -#define MPI_File_set_view HDF_MPI_File_set_view -#define MPI_File_get_view HDF_MPI_File_get_view -#define MPI_File_read_at HDF_MPI_File_read_at -#define MPI_File_read_at_all HDF_MPI_File_read_at_all -#define MPI_File_write_at HDF_MPI_File_write_at -#define MPI_File_write_at_all HDF_MPI_File_write_at_all -#define MPI_File_iread_at HDF_MPI_File_iread_at -#define MPI_File_iwrite_at HDF_MPI_File_iwrite_at -#define MPI_File_read HDF_MPI_File_read -#define MPI_File_read_all HDF_MPI_File_read_all -#define MPI_File_write HDF_MPI_File_write -#define MPI_File_write_all HDF_MPI_File_write_all -#define MPI_File_iread HDF_MPI_File_iread -#define MPI_File_iwrite HDF_MPI_File_iwrite -#define MPI_File_seek HDF_MPI_File_seek -#define MPI_File_get_position HDF_MPI_File_get_position -#define MPI_File_get_byte_offset HDF_MPI_File_get_byte_offset -#define MPI_File_get_type_extent HDF_MPI_File_get_type_extent -#define MPI_File_set_atomicity HDF_MPI_File_set_atomicity -#define MPI_File_get_atomicity HDF_MPI_File_get_atomicity -#define MPI_File_sync HDF_MPI_File_sync -#endif -*/ -#endif -#endif -#ifdef __cplusplus -} - -#endif /* H5_HAVE_PARALLEL */ - -#endif /* HDFIOTRACE conditional */ |