diff options
Diffstat (limited to 'pablo/Makefile.in')
| -rw-r--r-- | pablo/Makefile.in | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/pablo/Makefile.in b/pablo/Makefile.in deleted file mode 100644 index 4949468..0000000 --- a/pablo/Makefile.in +++ /dev/null @@ -1,231 +0,0 @@ -## HDF5 Library Makefile(.in) -## -## -## Copyright by the Board of Trustees of the University of Illinois. -## All rights reserved. -## -## This file is part of HDF5. The full HDF5 copyright notice, including -## terms governing use, modification, and redistribution, is contained in -## the files COPYING and Copyright.html. COPYING can be found at the root -## of the source code distribution tree; Copyright.html can be found at the -## root level of an installed copy of the electronic HDF5 document set and -## is linked from the top-level documents page. It can also be found at -## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -## -top_srcdir=@top_srcdir@ -top_builddir=.. -srcdir=@srcdir@ - -@COMMENCE@ - -TRACE=$(PERL) $(top_srcdir)/bin/trace -.SUFFIXES: .c .o .lo .x - -############################################################################### -## MODIFICATONS FOR CREATING THE PABLO INSTRUMENTED LIBRARY libhdf5-inst.a -## For Pablo instrumenation of parallel code, remove the # from in front of -## PABLO_MPIO_FLAGS. -############################################################################### -PARALLEL_PABLO=@PARALLEL_PABLO@ - -PABLO_MPIO_FLAGS=${PARALLEL_PABLO:yes=-DH5_HAVE_PARALLEL -DH5_HAVE_MPIOTRACE} -PABLO_INC=-I$(top_srcdir)/src -I$(top_srcdir)/pablo -I$(top_builddir)/src -I. -PABLO_DEFS=-DH5_HAVE_PABLO -DH5_DEBUG_API -DNDEBUG -D$(PABLO_BLD)_BUILD - -PABLO_FLAGS=$(PABLO_DEFS) $(PABLO_MPIO_FLAGS) $(PABLO_INC) - -CPPFLAGS=$(PABLO_FLAGS) @CPPFLAGS@ - -## This is our main target: -LIB=libhdf5-inst.a - -SRCDIRS=$(top_srcdir)/pablo/. $(top_srcdir)/src/. - -# Took out the GNU'isms for the SRCFILES and LIB_SRC variables. -# -# This may cause problems in two ways: any changes to the SRCDIRS -# variable should be make to the SRCFILES macro also and the LIB_SRC -# variable now has directory paths included in it (which may cause -# problems somewhere). - QAK -# -LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5Dio.c H5E.c H5F.c H5FD.c \ - H5FDcore.c H5FDfamily.c H5FDfphdf5.c H5FDgass.c H5FDlog.c \ - H5FDmpio.c H5FDmpiposix.c H5FDmulti.c H5FDsec2.c H5FDsrb.c \ - H5FDstdio.c H5FDstream.c H5FL.c H5FO.c H5FP.c H5FPclient.c \ - H5FPserver.c H5FS.c H5Fcompact.c H5Fcontig.c H5Fistore.c H5Fseq.c \ - H5G.c H5Gent.c H5Gnode.c H5Gstab.c H5HG.c H5HL.c H5HP.c H5I.c \ - H5MF.c H5MM.c H5O.c H5Oattr.c H5Obogus.c H5Ocont.c H5Odtype.c \ - H5Oefl.c H5Ofill.c H5Olayout.c H5Omtime.c H5Oname.c H5Onull.c \ - H5Opline.c H5Osdspace.c H5Oshared.c H5Ostab.c H5P.c H5Pdcpl.c \ - H5Pdxpl.c H5Pfapl.c H5Pfcpl.c H5Ptest.c H5R.c H5RS.c H5S.c H5ST.c \ - H5Sall.c H5Shyper.c H5Smpio.c H5Snone.c H5Spoint.c H5Sselect.c \ - H5Stest.c H5T.c H5TB.c H5TS.c H5Tarray.c H5Tbit.c H5Tcommit.c \ - H5Tcompound.c H5Tconv.c H5Tcset.c H5Tenum.c H5Tfields.c H5Tfixed.c \ - H5Tfloat.c H5Tinit.c H5Tnative.c H5Toffset.c H5Topaque.c H5Torder.c \ - H5Tpad.c H5Tprecis.c H5Tstrpad.c H5Tvlen.c H5V.c H5Z.c H5Zdeflate.c \ - H5Zfletcher32.c H5Zshuffle.c H5Zszip.c H5detect.c - -PABLO_OBJ=PabloHDF.o PabloHDF_RT.o PabloHDF_SDDF.o PabloHDF_MPIO.o - -PABLO_INCLUDES=HDFentryNames.h HDFidList.h ProcIDs.h HDFTrace.h ProcTrace.h \ - ProcTrace.inc - -LIB_COBJ=$(LIB_SRC:.c=.o) -LIB_OBJ=$(PABLO_OBJ) $(LIB_COBJ) - -$(LIB_COBJ): $(PABLO_INCLUDES) -$(PABLO_OBJ): $(PABLO_INCLUDES) -.c.o: - if test "$*" != "H5Tinit"; then \ - $(CC) $(CFLAGS) $(CPPFLAGS) -c $(top_srcdir)/src/$*.c -o $*.o; \ - else \ - $(CC) $(CFLAGS) $(CPPFLAGS) -c $(top_builddir)/src/$*.c -o $*.o; \ - fi; -# cp $*.o $@ - -# 'vpath' directive is only supported in gmake, take out - QAK -#vpath %.c $(shell echo $(SRCDIRS) | sed 's/ /:/g') - -## Pablo header files (to be installed)... -PABLO_HDR=HDFentryNames.h HDFidList.h ProcIDs.h HDFTrace.h ProcTrace.h \ - ProcTrace.inc - -##------------------------------------------------------------ -*- makefile -*- -## The following section of this makefile comes from the -## `./config/conclude' file which was generated with config.status -## from `./config/conclude.in'. -##----------------------------------------------------------------------------- - - -## This is the target for the library described in the main body of the -## makefile. -## -lib: $(PABLO_INCLUDES) $(LIB) -$(LIB): $(PABLO_OBJ) $(LIB_COBJ) - $(AR) -rc $@ $(LIB_OBJ) - $(RANLIB) $@ -## -## Dummy this out so that there is no redundant make of the library -## -progs: - -## Build a tags file in this directory. -TAGS: $(LIB_SRC) - $(RM) $@ - -etags $(LIB_SRC) - -## -## Dummy this out so that there is no redundant make of the library -## -tests: - -## Install the library, the public header files, and programs. -install: $(LIB) $(PABLO_HDR) - @test -d $(libdir) || mkdir $(libdir) - @for f in X $(LIB); do \ - if test $$f != X; then \ - (set -x; $(INSTALL_DATA) $$f $(libdir)/. || exit 1); \ - fi; \ - done - @test -d $(includedir) || mkdir $(includedir) - @for f in X $(PABLO_HDR); do \ - if test $$f != X; then \ - if test -f $$f; then \ - (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1); \ - else \ - (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. || \ - exit 1); \ - fi; \ - fi; \ - done - -## Removes those things that `make install' (would have) installed. -uninstall: - @if test "X$(LIB)" != X; then \ - set -x; cd $(libdir) && $(RM) $(LIB); \ - fi - -## Removes temporary files without removing the final target files. That is, -## remove things like object files but not libraries or executables. -## -mostlyclean: - $(RM) $(LIB_OBJ) $(LIB_XOBJ) $(TEST_OBJ) $(PROG_OBJ) $(MOSTLYCLEAN) - -## Like `mostlyclean' except it also removes the final targets: things like -## libraries and executables. This target doesn't remove any file that -## is part of the HDF5 distribution. -## -clean: mostlyclean pablo_clean - $(RM) $(LIB) $(TESTS) $(PROGS) $(CLEAN) H*.c - -pablo_clean: clean - $(RM) $(PABLO_CLEAN) H*.x - - -## Like `clean' except it also removes files that were created by running -## configure. If you've unpacked the source and built HDF5 without creating -## any other files, then `make distclean' will leave only the files that were -## in the distribution. -## -distclean: clean - $(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN) - @if test -f $(top_srcdir)/src/Makefile.in; then \ - (set -x; $(RM) Makefile); \ - fi - -## Like `distclean' except it deletes all files that can be regenerated from -## the makefile, including those generated from autoheader and autoconf. -## -maintainer-clean: distclean - $(RM) *~ core core.* *.core *.bak *.contrib gmon.out - -.c.lo: - @$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $(top_srcdir)/src/$*.c $< - -.PHONY: progs test _test check dep depend - -PABLO_CLEAN=HDFentryNames.h HDFidList.h ProcMasks.h HDFentries.txt \ - ProcTrace.inc - -# -# Leave the following lines that are commented out. These are needed to -# create HDFentryNames.h, HDFidList.h, ProcMask.h and ProcTrace.inc whenever -# new procedures are added. -# -HDFentries.txt: $(top_srcdir)/src/*.c - grep "FUNC_ENTER[_INITNOAPICLEARFS ]*(" $(top_srcdir)/src/*.[ch] | \ - sed "s/.*FUNC_ENTER[_INITNOAPICLEARFS ]*( *//;s/[,)].*//" | sort -u > $@ - -HDFentryNames.h: HDFentries.txt - sed "s/.*/\"&\",/" $? > $@ - -HDFidList.h: HDFentries.txt - sed "s/.*/ID_&,/" $? > $@ - echo ID_ALLHDF, >> $@ - grep "#define[ ]*PABLO_MASK" $(top_srcdir)/src/*.c | \ - sed "s/.*H5/ID_H5/;s/mask.*/c,/" | sort -u >> $@ - -ProcMasks.h: $(top_srcdir)/src/*.c - grep "#define[ ]*PABLO_MASK" $(top_srcdir)/src/*.c | \ - sed "s/.*[ ]H5/H5/;s/_mask.*//;s/.*/#define &_mask ID_&_c/" >$@ - -ProcIDs.h: HDFidList.h ProcMasks.h - -ProcTrace.inc: HDFidList.h - sed "=" $? | sed -f $(top_srcdir)/pablo/PabloSedscr > $@ - -PabloHDF.o: PabloHDF.c $(PABLO_INCLUDES) - $(CC) -g $(CFLAGS) $(CPPFLAGS) $(PABLO_FLAGS) -c $< - -PabloHDF_RT.o: PabloHDF_RT.c $(PABLO_INCLUDES) - $(CC) $(CFLAGS) $(CPPFLAGS) $(PABLO_FLAGS) -c $< - -PabloHDF_SDDF.o: PabloHDF_SDDF.c $(PABLO_INCLUDES) - $(CC) $(CFLAGS) $(CPPFLAGS) $(PABLO_FLAGS) -c $< - -PabloHDF_MPIO.o: PabloHDF_MPIO.c $(PABLO_INCLUDES) - $(CC) $(CFLAGS) $(CPPFLAGS) $(PABLO_FLAGS) -c $< - -PabloHDFff.o: PabloHDFff.f $(PABLO_INCLUDES) - $(F77) $(FFLAGS) -O -c PabloHDFff.f |