summaryrefslogtreecommitdiffstats
path: root/perform
diff options
context:
space:
mode:
Diffstat (limited to 'perform')
-rw-r--r--perform/CMakeLists.txt20
-rw-r--r--perform/Makefile.am3
-rw-r--r--perform/Makefile.in38
-rw-r--r--perform/mpi-perf.c373
4 files changed, 18 insertions, 416 deletions
diff --git a/perform/CMakeLists.txt b/perform/CMakeLists.txt
index 421caba..0a34677 100644
--- a/perform/CMakeLists.txt
+++ b/perform/CMakeLists.txt
@@ -2,6 +2,11 @@ cmake_minimum_required (VERSION 2.8.6)
PROJECT (HDF5_PERFORM )
#-----------------------------------------------------------------------------
+# Apply Definitions to compiler in this directory and below
+#-----------------------------------------------------------------------------
+ADD_DEFINITIONS (${HDF5_EXTRA_C_FLAGS})
+
+#-----------------------------------------------------------------------------
# Setup include Directories
#-----------------------------------------------------------------------------
INCLUDE_DIRECTORIES (${HDF5_TEST_SRC_DIR})
@@ -119,17 +124,6 @@ IF (H5_HAVE_PARALLEL)
TARGET_NAMING (benchpar ${LIB_TYPE})
TARGET_LINK_LIBRARIES (benchpar ${HDF5_LIB_TARGET} ${HDF5_TOOLS_LIB_TARGET} ${HDF5_TEST_LIB_TARGET})
SET_TARGET_PROPERTIES (benchpar PROPERTIES FOLDER perform)
-
- #-- Adding test for mpi-perf
- IF (NOT WIN32)
- SET (mpi-perf_SRCS
- ${HDF5_PERFORM_SOURCE_DIR}/mpi-perf.c
- )
- ADD_EXECUTABLE (mpi-perf ${mpi-perf_SRCS})
- TARGET_NAMING (mpi-perf ${LIB_TYPE})
- TARGET_LINK_LIBRARIES (mpi-perf ${HDF5_LIB_TARGET} ${HDF5_TOOLS_LIB_TARGET} ${HDF5_TEST_LIB_TARGET})
- SET_TARGET_PROPERTIES (mpi-perf PROPERTIES FOLDER perform)
- ENDIF (NOT WIN32)
ENDIF (HDF5_BUILD_PARALLEL_ALL)
ENDIF (H5_HAVE_PARALLEL)
@@ -192,9 +186,5 @@ IF (H5_HAVE_PARALLEL)
IF (HDF5_BUILD_PARALLEL_ALL)
ADD_TEST (NAME PERFORM_benchpar COMMAND ${MPIEXEC} ${MPIEXEC_PREFLAGS} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_POSTFLAGS} $<TARGET_FILE:benchpar>)
-
- IF (NOT WIN32)
- ADD_TEST (NAME PERFORM_mpi-perf COMMAND ${MPIEXEC} ${MPIEXEC_PREFLAGS} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_POSTFLAGS} $<TARGET_FILE:mpi-perf>)
- ENDIF (NOT WIN32)
ENDIF (HDF5_BUILD_PARALLEL_ALL)
ENDIF (H5_HAVE_PARALLEL)
diff --git a/perform/Makefile.am b/perform/Makefile.am
index c4720f8..6fe32cf 100644
--- a/perform/Makefile.am
+++ b/perform/Makefile.am
@@ -37,8 +37,9 @@ h5perf_serial_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
# Some programs are not built or run by default, but can be built by hand or by
# specifying --enable-build-all at configure time.
# Also, some of these programs should only be built in parallel.
+# Currently there is no such program.
if BUILD_PARALLEL_CONDITIONAL
- PARA_BUILD_ALL=benchpar mpi-perf
+ PARA_BUILD_ALL=
endif
if BUILD_ALL_CONDITIONAL
BUILD_ALL_PROGS=$(PARA_BUILD_ALL)
diff --git a/perform/Makefile.in b/perform/Makefile.in
index 1f9cfd6..a66a5a8 100644
--- a/perform/Makefile.in
+++ b/perform/Makefile.in
@@ -90,22 +90,17 @@ CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
-@BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = benchpar$(EXEEXT) \
-@BUILD_PARALLEL_CONDITIONAL_TRUE@ mpi-perf$(EXEEXT)
+am__EXEEXT_1 =
@BUILD_ALL_CONDITIONAL_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
PROGRAMS = $(bin_PROGRAMS)
-benchpar_SOURCES = benchpar.c
-benchpar_OBJECTS = benchpar.$(OBJEXT)
-benchpar_LDADD = $(LDADD)
-benchpar_DEPENDENCIES = $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
chunk_SOURCES = chunk.c
chunk_OBJECTS = chunk.$(OBJEXT)
chunk_LDADD = $(LDADD)
chunk_DEPENDENCIES = $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
dectris_perf_SOURCES = dectris_perf.c
dectris_perf_OBJECTS = dectris_perf.$(OBJEXT)
dectris_perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
@@ -126,10 +121,6 @@ h5perf_serial_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
iopipe_SOURCES = iopipe.c
iopipe_OBJECTS = iopipe.$(OBJEXT)
iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-mpi_perf_SOURCES = mpi-perf.c
-mpi_perf_OBJECTS = mpi-perf.$(OBJEXT)
-mpi_perf_LDADD = $(LDADD)
-mpi_perf_DEPENDENCIES = $(LIBHDF5)
overhead_SOURCES = overhead.c
overhead_OBJECTS = overhead.$(OBJEXT)
overhead_LDADD = $(LDADD)
@@ -177,11 +168,11 @@ AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
-SOURCES = benchpar.c chunk.c dectris_perf.c $(h5perf_SOURCES) \
- $(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+SOURCES = chunk.c dectris_perf.c $(h5perf_SOURCES) \
+ $(h5perf_serial_SOURCES) iopipe.c overhead.c perf.c \
perf_meta.c zip_perf.c
-DIST_SOURCES = benchpar.c chunk.c dectris_perf.c $(h5perf_SOURCES) \
- $(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+DIST_SOURCES = chunk.c dectris_perf.c $(h5perf_SOURCES) \
+ $(h5perf_serial_SOURCES) iopipe.c overhead.c perf.c \
perf_meta.c zip_perf.c
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
@@ -485,7 +476,8 @@ h5perf_serial_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
# Some programs are not built or run by default, but can be built by hand or by
# specifying --enable-build-all at configure time.
# Also, some of these programs should only be built in parallel.
-@BUILD_PARALLEL_CONDITIONAL_TRUE@PARA_BUILD_ALL = benchpar mpi-perf
+# Currently there is no such program.
+@BUILD_PARALLEL_CONDITIONAL_TRUE@PARA_BUILD_ALL =
@BUILD_ALL_CONDITIONAL_TRUE@BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
# Define programs that will be run in 'make check'
@@ -621,9 +613,6 @@ clean-checkPROGRAMS:
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
-benchpar$(EXEEXT): $(benchpar_OBJECTS) $(benchpar_DEPENDENCIES) $(EXTRA_benchpar_DEPENDENCIES)
- @rm -f benchpar$(EXEEXT)
- $(AM_V_CCLD)$(LINK) $(benchpar_OBJECTS) $(benchpar_LDADD) $(LIBS)
chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) $(EXTRA_chunk_DEPENDENCIES)
@rm -f chunk$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
@@ -639,9 +628,6 @@ h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) $
iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) $(EXTRA_iopipe_DEPENDENCIES)
@rm -f iopipe$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
-mpi-perf$(EXEEXT): $(mpi_perf_OBJECTS) $(mpi_perf_DEPENDENCIES) $(EXTRA_mpi_perf_DEPENDENCIES)
- @rm -f mpi-perf$(EXEEXT)
- $(AM_V_CCLD)$(LINK) $(mpi_perf_OBJECTS) $(mpi_perf_LDADD) $(LIBS)
overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) $(EXTRA_overhead_DEPENDENCIES)
@rm -f overhead$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
@@ -661,11 +647,9 @@ mostlyclean-compile:
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/benchpar.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chunk.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dectris_perf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iopipe.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mpi-perf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/overhead.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf_meta.Po@am__quote@
diff --git a/perform/mpi-perf.c b/perform/mpi-perf.c
deleted file mode 100644
index a09d672..0000000
--- a/perform/mpi-perf.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group. *
- * Copyright by the Board of Trustees of the University of Illinois. *
- * All rights reserved. *
- * *
- * This file is part of HDF5. The full HDF5 copyright notice, including *
- * terms governing use, modification, and redistribution, is contained in *
- * the files COPYING and Copyright.html. COPYING can be found at the root *
- * of the source code distribution tree; Copyright.html can be found at the *
- * root level of an installed copy of the electronic HDF5 document set and *
- * is linked from the top-level documents page. It can also be found at *
- * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
- * access to either file, you may request a copy from help@hdfgroup.org. *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/*
- * (C) 1995-2001 Clemson University and Argonne National Laboratory.
- *
- * See COPYING in top-level directory.
- *
- * This is contributed by Robert Ross to the HDF5 software.
- * and was called mpi-io-test.c
- */
-
-#include "hdf5.h"
-#include "H5private.h"
-#ifdef H5_HAVE_PARALLEL
-/* mpi-perf.c
- *
- * This is derived from code given to me by Rajeev Thakur. Dunno where
- * it originated.
- *
- * It's purpose is to produce aggregate bandwidth numbers for varying
- * block sizes, number of processors, an number of iterations.
- *
- * This is strictly an mpi program - it is used to test the MPI I/O
- * functionality implemented by Romio.
- *
- * Compiling is usually easiest with something like:
- * mpicc -Wall -Wstrict-prototypes mpi-io-test.c -o mpi-io-test
- *
- * NOTE: This code assumes that all command line arguments make it out to all
- * the processes that make up the parallel job, which isn't always the case.
- * So if it doesn't work on some platform, that might be why.
- */
-/* Modifications:
- * Albert Cheng, Apr 30, 20001
- * Changed MPI_File_open to use MPI_COMM_WORLD (was MPI_COMM_SELF).
- * Albert Cheng, May 5, 20001
- * Changed MPI_File_seek then MPI_File_write or MPI_File_read to just
- * MPI_File_write_at and MPI_File_read_at. Some compiler, e.g., IBM
- * mpcc_r does not support MPI_File_seek and MPI_File_read or MPI_File_write.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#ifdef H5_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <errno.h>
-#include <string.h>
-#if defined(H5_TIME_WITH_SYS_TIME)
-# include <sys/time.h>
-# include <time.h>
-#elif defined(H5_HAVE_SYS_TIME_H)
-# include <sys/time.h>
-#else
-# include <time.h>
-#endif
-#include <mpi.h>
-#ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */
-# include <mpio.h>
-#endif
-
-
-
-/* DEFAULT VALUES FOR OPTIONS */
-int64_t opt_block = 1048576*16;
-int opt_iter = 1;
-int opt_stripe = -1;
-int opt_correct = 0;
-int amode = O_RDWR | O_CREAT;
-char opt_file[256] = "/tmp/test.out\0";
-char opt_pvfstab[256] = "notset\0";
-int opt_pvfstab_set = 0;
-
-/* function prototypes */
-static int parse_args(int argc, char **argv);
-
-extern int errno;
-
-/* globals needed for getopt */
-extern char *optarg;
-
-int main(int argc, char **argv)
-{
- char *buf, *tmp, *buf2, *tmp2, *check;
- int i, j, mynod=0, nprocs=1, err, my_correct = 1, correct, myerrno;
- double stim, etim;
- double write_tim = 0;
- double read_tim = 0;
- double read_bw, write_bw;
- double max_read_tim, max_write_tim;
- double min_read_tim, min_write_tim;
- double ave_read_tim, ave_write_tim;
- int64_t iter_jump = 0;
- int64_t seek_position = 0;
- MPI_File fh;
- MPI_Status status;
- int nchars;
-
- /* startup MPI and determine the rank of this process */
- MPI_Init(&argc,&argv);
- MPI_Comm_size(MPI_COMM_WORLD, &nprocs);
- MPI_Comm_rank(MPI_COMM_WORLD, &mynod);
-
- /* parse the command line arguments */
- parse_args(argc, argv);
-
- if (mynod == 0) printf("# Using mpi-io calls.\n");
-
-
- /* kindof a weird hack- if the location of the pvfstab file was
- * specified on the command line, then spit out this location into
- * the appropriate environment variable: */
-
-#if H5_HAVE_SETENV
-/* no setenv or unsetenv */
- if (opt_pvfstab_set) {
- if((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0){
- perror("setenv");
- goto die_jar_jar_die;
- }
- }
-#endif
-
- /* this is how much of the file data is covered on each iteration of
- * the test. used to help determine the seek offset on each
- * iteration */
- iter_jump = nprocs * opt_block;
-
- /* setup a buffer of data to write */
- if (!(tmp = (char *) malloc(opt_block + 256))) {
- perror("malloc");
- goto die_jar_jar_die;
- }
- buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */
-
- if (opt_correct) {
- /* do the same buffer setup for verifiable data */
- if (!(tmp2 = (char *) malloc(opt_block + 256))) {
- perror("malloc2");
- goto die_jar_jar_die;
- }
- buf2 = tmp + 128 - (((long)tmp) % 128);
- }
-
- /* open the file for writing */
- err = MPI_File_open(MPI_COMM_WORLD, opt_file,
- MPI_MODE_CREATE | MPI_MODE_RDWR, MPI_INFO_NULL, &fh);
- if (err < 0) {
- fprintf(stderr, "node %d, open error: %s\n", mynod, strerror(errno));
- goto die_jar_jar_die;
- }
-
- /* now repeat the write operations the number of times
- * specified on the command line */
- for (j=0; j < opt_iter; j++) {
-
- /* calculate the appropriate position depending on the iteration
- * and rank of the current process */
- seek_position = (j*iter_jump)+(mynod*opt_block);
-
- if (opt_correct) /* fill in buffer for iteration */ {
- for (i=mynod+j, check=buf; i<opt_block; i++,check++) *check=(char)i;
- }
-
- /* discover the starting time of the operation */
- MPI_Barrier(MPI_COMM_WORLD);
- stim = MPI_Wtime();
-
- /* write out the data */
- nchars = opt_block/sizeof(char);
- err = MPI_File_write_at(fh, seek_position, buf, nchars, MPI_CHAR, &status);
- if(err){
- fprintf(stderr, "node %d, write error: %s\n", mynod,
- strerror(errno));
- }
-
- /* discover the ending time of the operation */
- etim = MPI_Wtime();
-
- write_tim += (etim - stim);
-
- /* we are done with this "write" iteration */
- }
-
- err = MPI_File_close(&fh);
- if(err){
- fprintf(stderr, "node %d, close error after write\n", mynod);
- }
-
- /* wait for everyone to synchronize at this point */
- MPI_Barrier(MPI_COMM_WORLD);
-
- /* reopen the file to read the data back out */
- err = MPI_File_open(MPI_COMM_WORLD, opt_file,
- MPI_MODE_CREATE | MPI_MODE_RDWR, MPI_INFO_NULL, &fh);
- if (err < 0) {
- fprintf(stderr, "node %d, open error: %s\n", mynod, strerror(errno));
- goto die_jar_jar_die;
- }
-
-
- /* we are going to repeat the read operation the number of iterations
- * specified */
- for (j=0; j < opt_iter; j++) {
- /* calculate the appropriate spot give the current iteration and
- * rank within the MPI processes */
- seek_position = (j*iter_jump)+(mynod*opt_block);
-
- /* discover the start time */
- MPI_Barrier(MPI_COMM_WORLD);
- stim = MPI_Wtime();
-
- /* read in the file data */
- if (!opt_correct){
- err = MPI_File_read_at(fh, seek_position, buf, nchars, MPI_CHAR, &status);
- }
- else{
- err = MPI_File_read_at(fh, seek_position, buf2, nchars, MPI_CHAR, &status);
- }
- myerrno = errno;
-
- /* discover the end time */
- etim = MPI_Wtime();
- read_tim += (etim - stim);
-
- if (err < 0) fprintf(stderr, "node %d, read error, loc = %Ld: %s\n",
- mynod, mynod*opt_block, strerror(myerrno));
-
- /* if the user wanted to check correctness, compare the write
- * buffer to the read buffer */
- if (opt_correct && memcmp(buf, buf2, opt_block)) {
- fprintf(stderr, "node %d, correctness test failed\n", mynod);
- my_correct = 0;
- MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN,
- MPI_COMM_WORLD);
- }
-
- /* we are done with this read iteration */
- }
-
- /* close the file */
- err = MPI_File_close(&fh);
- if(err){
- fprintf(stderr, "node %d, close error after write\n", mynod);
- }
-
- /* compute the read and write times */
- MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX,
- MPI_COMM_WORLD);
- MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN,
- MPI_COMM_WORLD);
- MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM,
- MPI_COMM_WORLD);
-
- /* calculate the average from the sum */
- ave_read_tim = ave_read_tim / nprocs;
-
- MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX,
- MPI_COMM_WORLD);
- MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN,
- MPI_COMM_WORLD);
- MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM,
- MPI_COMM_WORLD);
-
- /* calculate the average from the sum */
- ave_write_tim = ave_write_tim / nprocs;
-
- /* print out the results on one node */
- if (mynod == 0) {
- read_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_read_tim*1000000.0);
- write_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_write_tim*1000000.0);
-
- printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs,
- opt_iter, (long)opt_block);
-
- printf("# total_size = %ld\n", (long)(opt_block*nprocs*opt_iter));
-
- printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n",
- min_write_tim, max_write_tim, ave_write_tim);
- printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n",
- min_read_tim, max_read_tim, ave_read_tim);
-
- printf("Write bandwidth = %f Mbytes/sec\n", write_bw);
- printf("Read bandwidth = %f Mbytes/sec\n", read_bw);
-
- if (opt_correct) {
- printf("Correctness test %s.\n", correct ? "passed" : "failed");
- }
- }
-
-
-die_jar_jar_die:
-
-#if H5_HAVE_SETENV
-/* no setenv or unsetenv */
- /* clear the environment variable if it was set earlier */
- if (opt_pvfstab_set){
- unsetenv("PVFSTAB_FILE");
- }
-#endif
-
- free(tmp);
- if (opt_correct) free(tmp2);
- MPI_Finalize();
- return(0);
-}
-
-static int
-parse_args(int argc, char **argv)
-{
- int c;
-
- while ((c = getopt(argc, argv, "s:b:i:f:p:c")) != EOF) {
- switch (c) {
- case 's': /* stripe */
- opt_stripe = atoi(optarg);
- break;
- case 'b': /* block size */
- opt_block = atoi(optarg);
- break;
- case 'i': /* iterations */
- opt_iter = atoi(optarg);
- break;
- case 'f': /* filename */
- strncpy(opt_file, optarg, 255);
- break;
- case 'p': /* pvfstab file */
- strncpy(opt_pvfstab, optarg, 255);
- opt_pvfstab_set = 1;
- break;
- case 'c': /* correctness */
- opt_correct = 1;
- break;
- case '?': /* unknown */
- default:
- break;
- }
- }
- return(0);
-}
-
-/*
- * Local variables:
- * c-indent-level: 3
- * c-basic-offset: 3
- * tab-width: 3
- * End:
- */
-
-#else /* H5_HAVE_PARALLEL */
-/* dummy program since H5_HAVE_PARALLEL is not configured in */
-int
-main(int UNUSED argc, char UNUSED **argv)
-{
- printf("No parallel performance because parallel is not configured in\n");
- return(0);
-}
-#endif /* H5_HAVE_PARALLEL */
-
generated by cgit v0.12 at 2024-12-28 00:20:34 (GMT)