diff options
Diffstat (limited to 'perform')
-rw-r--r-- | perform/pio_engine.c | 85 | ||||
-rw-r--r-- | perform/pio_perf.c | 388 | ||||
-rw-r--r-- | perform/pio_perf.h | 4 | ||||
-rw-r--r-- | perform/pio_timer.h | 8 |
4 files changed, 346 insertions, 139 deletions
diff --git a/perform/pio_engine.c b/perform/pio_engine.c index c2e7ac4..cebefe4 100644 --- a/perform/pio_engine.c +++ b/perform/pio_engine.c @@ -30,7 +30,7 @@ /* Macro definitions */ /* sizes of various items. these sizes won't change during program execution */ -#define ELMT_SIZE sizeof(int) /* we're doing ints */ +#define ELMT_SIZE ((int)sizeof(int)) /* we're doing ints */ #define GOTOERROR(errcode) { ret_code = errcode; goto done; } #define GOTODONE { goto done; } @@ -93,10 +93,6 @@ enum { }; /* Global variables */ -MPI_Comm pio_comm_g; /* Communicator to run the PIO */ -int pio_mpi_rank_g; /* MPI rank of pio_comm_g */ -int pio_mpi_nprocs_g; /* number of processes of pio_comm_g */ - static int clean_file_g = -1; /*whether to cleanup temporary test */ /*files. -1 is not defined; */ /*0 is no cleanup; 1 is do cleanup */ @@ -152,7 +148,6 @@ results do_pio(parameters param) { /* return codes */ - int rc; /*routine return code */ int mrc; /*MPI return code */ herr_t ret_code = 0; /*return code */ results res; @@ -164,18 +159,12 @@ do_pio(parameters param) int maxprocs; int nfiles, nf; long ndsets, nelmts; - int color; /*for communicator creation */ char *buffer = NULL; /*data buffer pointer */ long buf_size; /*data buffer size in bytes */ /* HDF5 variables */ herr_t hrc; /*HDF5 return code */ - /* MPI variables */ - int myrank, nprocs = 1; - - pio_comm_g = MPI_COMM_NULL; - /* Sanity check parameters */ /* IO type */ @@ -234,15 +223,6 @@ do_pio(parameters param) GOTOERROR(FAIL); } - MPI_Comm_size(MPI_COMM_WORLD, &nprocs); - - if (maxprocs > nprocs) { - fprintf(stderr, - "maximum number of process(%d) must be <= process in MPI_COMM_WORLD(%d)\n", - maxprocs, nprocs); - GOTOERROR(FAIL); - } - if (buf_size <= 0 ){ fprintf(stderr, "buffer size must be > 0 (%ld)\n", buf_size); @@ -264,33 +244,12 @@ buf_size=MIN(1024*1024, buf_size); /* DEBUG END */ #endif - /* Create a sub communicator for this PIO run. Easier to use the first N - * processes. */ - MPI_Comm_rank(MPI_COMM_WORLD, &myrank); - color = (myrank < maxprocs); - mrc = MPI_Comm_split(MPI_COMM_WORLD, color, myrank, &pio_comm_g); - - if (mrc != MPI_SUCCESS) { - fprintf(stderr, "MPI_Comm_split failed\n"); - GOTOERROR(FAIL); - } - - if (!color){ - /* not involved in this run */ - mrc = MPI_Comm_free(&pio_comm_g); - GOTODONE; - } - - /* determine the mpi rank of in the PIO communicator */ - MPI_Comm_size(pio_comm_g, &pio_mpi_nprocs_g); - MPI_Comm_rank(pio_comm_g, &pio_mpi_rank_g); - /* allocate data buffer */ - buffer = malloc(buf_size); + buffer = malloc((size_t)buf_size); if (buffer == NULL){ fprintf(stderr, "malloc for data buffer size (%ld) failed\n", - buf_size); + buf_size); GOTOERROR(FAIL); } @@ -307,15 +266,17 @@ buf_size=MIN(1024*1024, buf_size); fprintf(stderr, "filename=%s\n", fname); #endif + set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, START); + set_time(res.timers, HDF5_FILE_OPENCLOSE, START); hrc = do_fopen(iot, fname, &fd, PIO_CREATE | PIO_WRITE); set_time(res.timers, HDF5_FILE_OPENCLOSE, STOP); VRFY((hrc == SUCCESS), "do_fopen failed"); - set_time(res.timers, HDF5_WRITE_FIXED_DIMS, START); + set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, START); hrc = do_write(&fd, iot, ndsets, nelmts, buf_size, buffer); - set_time(res.timers, HDF5_WRITE_FIXED_DIMS, STOP); + set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, STOP); VRFY((hrc == SUCCESS), "do_write failed"); @@ -324,21 +285,25 @@ fprintf(stderr, "filename=%s\n", fname); hrc = do_fclose(iot, &fd); set_time(res.timers, HDF5_FILE_OPENCLOSE, STOP); + set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, STOP); + VRFY((hrc == SUCCESS), "do_fclose failed"); /* * Read performance measurement */ /* Open file for read */ + set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, START); + set_time(res.timers, HDF5_FILE_OPENCLOSE, START); hrc = do_fopen(iot, fname, &fd, PIO_READ); set_time(res.timers, HDF5_FILE_OPENCLOSE, STOP); VRFY((hrc == SUCCESS), "do_fopen failed"); - set_time(res.timers, HDF5_READ_FIXED_DIMS, START); + set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, START); hrc = do_read(&fd, iot, ndsets, nelmts, buf_size, buffer); - set_time(res.timers, HDF5_READ_FIXED_DIMS, STOP); + set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, STOP); VRFY((hrc == SUCCESS), "do_read failed"); @@ -347,6 +312,8 @@ fprintf(stderr, "filename=%s\n", fname); hrc = do_fclose(iot, &fd); set_time(res.timers, HDF5_FILE_OPENCLOSE, STOP); + set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, STOP); + VRFY((hrc == SUCCESS), "do_fclose failed"); do_cleanupfile(iot, fname); @@ -373,16 +340,6 @@ done: break; } - /* release MPI resources */ - if (pio_comm_g != MPI_COMM_NULL){ - mrc = MPI_Comm_free(&pio_comm_g); - - if (mrc != MPI_SUCCESS) { - fprintf(stderr, "MPI_Comm_free failed\n"); - ret_code = FAIL; - } - } - /* release generic resources */ free(buffer); res.ret_code = ret_code; @@ -637,8 +594,8 @@ fprintf(stderr, "proc %d: writes %ld bytes at file-offset %ld\n", rc = RAWSEEK(fd->rawfd, file_offset); VRFY((rc>=0), "RAWSEEK"); - rc = RAWWRITE(fd->rawfd, buffer, nelmts_towrite*ELMT_SIZE); - VRFY((rc==(nelmts_towrite*ELMT_SIZE)), "RAWWRITE"); + rc = RAWWRITE(fd->rawfd, buffer, (size_t)(nelmts_towrite * ELMT_SIZE)); + VRFY((rc == (nelmts_towrite*ELMT_SIZE)), "RAWWRITE"); break; case MPIO: @@ -735,7 +692,7 @@ done: */ static herr_t do_read(file_descr *fd, iotype iot, long ndsets, - long nelmts, long buf_size, void *buffer /*out*/) + long nelmts, long buf_size, void *buffer /*out*/) { int ret_code = SUCCESS; int rc; /*routine return code */ @@ -849,7 +806,7 @@ fprintf(stderr, "proc %d: read %ld bytes at file-offset %ld\n", rc = RAWSEEK(fd->rawfd, file_offset); VRFY((rc>=0), "RAWSEEK"); - rc = RAWREAD(fd->rawfd, buffer, nelmts_toread*ELMT_SIZE); + rc = RAWREAD(fd->rawfd, buffer, (size_t)(nelmts_toread*ELMT_SIZE)); VRFY((rc==(nelmts_toread*ELMT_SIZE)), "RAWREAD"); break; @@ -858,7 +815,7 @@ fprintf(stderr, "proc %d: read %ld bytes at file-offset %ld\n", #if AKCDEBUG fprintf(stderr, "proc %d: read %ld bytes at mpi-offset %ld\n", - pio_mpi_rank_g, nelmts_toread*ELMT_SIZE, mpi_offset); + pio_mpi_rank_g, nelmts_toread*ELMT_SIZE, mpi_offset); #endif mrc = MPI_File_read_at(fd->mpifd, mpi_offset, buffer, @@ -992,7 +949,7 @@ do_fopen(iotype iot, char *fname, file_descr *fd /*out*/, int flags) /*since MPI_File_open with MPI_MODE_CREATE does not truncate */ /*filesize , set size to 0 explicitedly. */ - mrc = MPI_File_set_size(fd->mpifd, 0); + mrc = MPI_File_set_size(fd->mpifd, (MPI_Offset)0); if (mrc != MPI_SUCCESS) { fprintf(stderr, "MPI_File_set_size failed\n"); diff --git a/perform/pio_perf.c b/perform/pio_perf.c index 8439f36..731df9b 100644 --- a/perform/pio_perf.c +++ b/perform/pio_perf.c @@ -50,6 +50,7 @@ */ /* system header files */ +#include <stdarg.h> #include <stdio.h> #include <stdlib.h> @@ -80,6 +81,12 @@ #define MIN_HDF5_BUF_SIZE (ONE_MB >> 1) #define MAX_HDF5_BUF_SIZE (ONE_GB / 2) +/* global variables */ +MPI_Comm pio_comm_g; /* Communicator to run the PIO */ +int pio_mpi_rank_g; /* MPI rank of pio_comm_g */ +int pio_mpi_nprocs_g; /* number of processes of pio_comm_g */ + + /* local variables */ static const char *progname = "pio_perf"; @@ -196,11 +203,23 @@ struct options { long min_xfer_size; /* minimum transfer buffer size */ }; +typedef struct _minmax { + double min; + double max; + double sum; + int num; +} minmax; + /* local functions */ static long parse_size_directive(const char *size); static struct options *parse_command_line(int argc, char *argv[]); static void run_test_loop(FILE *output, struct options *options); -static void run_test(FILE *output, iotype iot, parameters parms); +static int run_test(FILE *output, iotype iot, parameters parms); +static void get_minmax(minmax *mm); +static minmax accumulate_minmax_stuff(minmax *mm, int count); +static int create_comm_world(int num_procs); +static int destroy_comm_world(void); +static void output_report(FILE *output, const char *fmt, ...); static void print_indent(register FILE *output, register int indent); static void usage(const char *prog); @@ -218,17 +237,7 @@ main(int argc, char **argv) int world_size, ret; int exit_value = EXIT_SUCCESS; FILE *output = stdout; - struct options *opts; - - opts = parse_command_line(argc, argv); - - if (opts->output_file) { - if ((output = fopen(opts->output_file, "w")) == NULL) { - fprintf(stderr, "%s: cannot open output file\n", progname); - perror(opts->output_file); - goto onions; - } - } + struct options *opts = NULL; /* initialize MPI and get the maximum num of processors we started with */ MPI_Init(&argc, &argv); @@ -243,15 +252,30 @@ main(int argc, char **argv) fprintf(stderr, "invalid argument\n"); exit_value = EXIT_FAILURE; - goto cheese_and; + goto finish; + } + + pio_comm_g = MPI_COMM_WORLD; + + opts = parse_command_line(argc, argv); + + if (!opts) { + exit_value = EXIT_FAILURE; + goto finish; + } + + if (opts->output_file) { + if ((output = fopen(opts->output_file, "w")) == NULL) { + fprintf(stderr, "%s: cannot open output file\n", progname); + perror(opts->output_file); + goto finish; + } } run_test_loop(output, opts); -cheese_and: +finish: MPI_Finalize(); - -onions: free(opts); return exit_value; } @@ -301,24 +325,31 @@ run_test_loop(FILE *output, struct options *opts) parms.num_dsets = opts->num_dsets; parms.num_iters = opts->num_iters; - /* divide the maximum number of processors by 2 for each loop iter */ + /* multiply the maximum number of processors by 2 for each loop iter */ for (num_procs = opts->min_num_procs; num_procs <= opts->max_num_procs; num_procs <<= 1) { - register long j; + register long buf_size; parms.num_procs = num_procs; - fprintf(output, "Number of processors = %u\n", parms.num_procs); - for (j = opts->min_xfer_size; j <= opts->max_xfer_size; j <<= 1) { - parms.buf_size = j; + if (create_comm_world(parms.num_procs) != SUCCESS) { + /* do something harsh */ + } + + output_report(output, "Number of processors = %ld\n", parms.num_procs); + + /* multiply the xfer buffer size by 2 for each loop iteration */ + for (buf_size = opts->min_xfer_size; + buf_size <= opts->max_xfer_size; buf_size <<= 1) { + parms.buf_size = buf_size; parms.num_elmts = opts->file_size / (parms.num_dsets * sizeof(int)); print_indent(output, TAB_SPACE * 1); - fprintf(output, "Transfer Buffer Size: %u\n", j); + output_report(output, "Transfer Buffer Size: %ld\n", buf_size); print_indent(output, TAB_SPACE * 1); - fprintf(output, - " # of files: %u, # of dsets: %lu, Elements per dset: %lu\n", - parms.num_files, parms.num_dsets, parms.num_elmts); + output_report(output, + " # of files: %ld, # of dsets: %ld, # of elmts per dset: %ld\n", + parms.num_files, parms.num_dsets, parms.num_elmts); if (io_runs & PIO_RAW) run_test(output, RAW, parms); @@ -329,6 +360,10 @@ run_test_loop(FILE *output, struct options *opts) if (io_runs & PIO_HDF5) run_test(output, PHDF5, parms); } + + if (destroy_comm_world() != SUCCESS) { + /* do something harsh */ + } } } @@ -339,41 +374,248 @@ run_test_loop(FILE *output, struct options *opts) * Programmer: Bill Wendling, 18. December 2001 * Modifications: */ -static void +static int run_test(FILE *output, iotype iot, parameters parms) { - results res; + results res; + register int i, ret_value = SUCCESS; + int comm_size; + minmax total_mm; + minmax *write_mm_table; + minmax *read_mm_table; + minmax write_mm = {0.0, 0.0, 0.0, 0}; + minmax read_mm = {0.0, 0.0, 0.0, 0}; parms.io_type = iot; print_indent(output, TAB_SPACE * 2); - fprintf(output, "Type of IO = "); + output_report(output, "Type of IO = "); switch (iot) { case RAW: - fprintf(output, "Raw\n"); + output_report(output, "Raw\n"); break; case MPIO: - fprintf(output, "MPIO\n"); + output_report(output, "MPIO\n"); break; case PHDF5: - fprintf(output, "PHDF5\n"); + output_report(output, "PHDF5\n"); break; } + MPI_Comm_size(pio_comm_g, &comm_size); + + write_mm_table = malloc(parms.num_iters * sizeof(minmax)); + read_mm_table = malloc(parms.num_iters * sizeof(minmax)); + + for (i = 0; i < parms.num_iters; ++i) { + write_mm_table[i].min = 0.0; + write_mm_table[i].max = 0.0; + write_mm_table[i].sum = 0.0; + write_mm_table[i].num = 0; + + read_mm_table[i].min = 0.0; + read_mm_table[i].max = 0.0; + read_mm_table[i].sum = 0.0; + read_mm_table[i].num = 0; + } + /* call Albert's testing here */ - res = do_pio(parms); + for (i = 0; i < parms.num_iters; ++i) { + register int j; + double t; + + MPI_Barrier(pio_comm_g); + res = do_pio(parms); + + t = get_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS); + MPI_Send((void *)&t, 1, MPI_DOUBLE, 0, 0, pio_comm_g); + + for (j = 0; j < comm_size; ++j) + get_minmax(&write_mm); + + write_mm_table[i] = write_mm; + + t = get_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS); + MPI_Send((void *)&t, 1, MPI_DOUBLE, 0, 0, pio_comm_g); + + for (j = 0; j < comm_size; ++j) + get_minmax(&read_mm); + + read_mm_table[i] = read_mm; + } + + total_mm = accumulate_minmax_stuff(write_mm_table, parms.num_iters); + +printf("write metrics: min: %f, max: %f, avg: %f\n", total_mm.min, + total_mm.max, total_mm.sum / total_mm.num); + + total_mm = accumulate_minmax_stuff(read_mm_table, parms.num_iters); + +printf("read metrics: min: %f, max: %f, avg: %f\n", total_mm.min, + total_mm.max, total_mm.sum / total_mm.num); print_indent(output, TAB_SPACE * 3); - fprintf(output, "Write Results = %.2f MB/s\n", - MB_PER_SEC(parms.num_dsets * parms.num_elmts * sizeof(int), - get_time(res.timers, HDF5_WRITE_FIXED_DIMS))); + output_report(output, "Write Results = %.2f MB/s\n", + MB_PER_SEC(parms.num_dsets * parms.num_elmts * sizeof(int), + get_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS))); print_indent(output, TAB_SPACE * 3); - fprintf(output, "Read Results = %.2f MB/s\n", - MB_PER_SEC(parms.num_dsets * parms.num_elmts * sizeof(int), - get_time(res.timers, HDF5_READ_FIXED_DIMS))); + output_report(output, "Read Results = %.2f MB/s\n", + MB_PER_SEC(parms.num_dsets * parms.num_elmts * sizeof(int), + get_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS))); + free(write_mm_table); + free(read_mm_table); pio_time_destroy(res.timers); + return ret_value; +} + +static void +get_minmax(minmax *mm) +{ + int myrank; + + MPI_Comm_rank(pio_comm_g, &myrank); + + if (myrank == 0) { + MPI_Status status = {0}; + double t; + + MPI_Recv((void *)&t, 1, MPI_DOUBLE, MPI_ANY_SOURCE, + MPI_ANY_TAG, pio_comm_g, &status); + + ++mm->num; + mm->sum += t; + + if (t > mm->max) + mm->max = t; + + if (t < mm->min || mm->min <= 0.0) + mm->min = t; + } +} + +static minmax +accumulate_minmax_stuff(minmax *mm, int count) +{ + register int i; + minmax total_mm = mm[0]; + + for (i = 1; i < count; ++i) { + total_mm.sum += mm[i].sum; + total_mm.num += mm[i].num; + + if (mm[i].min < total_mm.min) + total_mm.min = mm[i].min; + + if (mm[i].max > total_mm.max) + total_mm.max = mm[i].max; + } + + return total_mm; +} + +/* + * Function: create_comm_world + * Purpose: Create an MPI Comm world and store it in pio_comm_g, which + * is a global variable. + * Return: SUCCESS on success. + * FAIL otherwise. + * Programmer: Bill Wendling, 19. December 2001 + * Modifications: + */ +static int +create_comm_world(int num_procs) +{ + /* MPI variables */ + int mrc, ret_value; /* return values */ + int color; /* for communicator creation */ + int myrank, nprocs; + + pio_comm_g = MPI_COMM_NULL; + + /* + * Create a sub communicator for this PIO run. Easier to use the first N + * processes. + */ + MPI_Comm_size(MPI_COMM_WORLD, &nprocs); + + if (num_procs > nprocs) { + fprintf(stderr, + "number of process(%d) must be <= number of processes in MPI_COMM_WORLD(%d)\n", + num_procs, nprocs); + goto error_done; + } + + MPI_Comm_rank(MPI_COMM_WORLD, &myrank); + color = (myrank < num_procs); + mrc = MPI_Comm_split(MPI_COMM_WORLD, color, myrank, &pio_comm_g); + + if (mrc != MPI_SUCCESS) { + fprintf(stderr, "MPI_Comm_split failed\n"); + goto error_done; + } + + if (!color) { + /* not involved in this run */ + mrc = destroy_comm_world(); + goto done; + } + + /* determine the MPI rank in the PIO communicator */ + MPI_Comm_size(pio_comm_g, &pio_mpi_nprocs_g); + MPI_Comm_rank(pio_comm_g, &pio_mpi_rank_g); + +done: + return ret_value; + +error_done: + destroy_comm_world(); + return FAIL; +} + +/* + * Function: destroy_comm_world + * Purpose: Destroy the created MPI Comm world which is stored in the + * pio_comm_g global variable. + * Return: SUCCESS on success. + * FAIL otherwise. + * Programmer: Bill Wendling, 19. December 2001 + * Modifications: + */ +static int +destroy_comm_world(void) +{ + int mrc = SUCCESS; /* return code */ + + /* release MPI resources */ + if (pio_comm_g != MPI_COMM_NULL) + mrc = (MPI_Comm_free(&pio_comm_g) == MPI_SUCCESS ? SUCCESS : FAIL); + + return mrc; +} + +/* + * Function: output_report + * Purpose: Print a line of the report. Only do so if I'm the 0 process. + * Return: Nothing + * Programmer: Bill Wendling, 19. December 2001 + * Modifications: + */ +static void +output_report(FILE *output, const char *fmt, ...) +{ + int myrank; + + MPI_Comm_rank(pio_comm_g, &myrank); + + if (myrank == 0) { + va_list ap; + + va_start(ap, fmt); + vfprintf(output, fmt, ap); + va_end(ap); + } } /* @@ -465,13 +707,11 @@ parse_command_line(int argc, char *argv[]) cl_opts->max_xfer_size = parse_size_directive(opt_arg); break; case 'h': - usage(progname); - exit(EXIT_SUCCESS); case '?': default: - /* there could be other command line options, such as MPI stuff - * that gets passed to our program, for some reason */ - break; + usage(progname); + free(cl_opts); + return NULL; } } @@ -536,34 +776,40 @@ parse_size_directive(const char *size) static void usage(const char *prog) { - fflush(stdout); - fprintf(stdout, "usage: %s [OPTIONS]\n", prog); - fprintf(stdout, " OPTIONS\n"); - fprintf(stdout, " -h, --help Print a usage message and exit\n"); - fprintf(stdout, " -d N, --num-dsets=N Number of datasets per file [default:1]\n"); - fprintf(stdout, " -f S, --file-size=S Size of a single file [default: 64M]\n"); - fprintf(stdout, " -F N, --num-files=N Number of files [default: 1]\n"); - fprintf(stdout, " -H, --hdf5 Run HDF5 performance test\n"); - fprintf(stdout, " -i, --num-iterations Number of iterations to perform [default: 1]\n"); - fprintf(stdout, " -m, --mpiio Run MPI/IO performance test\n"); - fprintf(stdout, " -o F, --output=F Output raw data into file F [default: none]\n"); - fprintf(stdout, " -P N, --max-num-processes=N Maximum number of processes to use [default: 1]\n"); - fprintf(stdout, " -p N, --min-num-processes=N Minimum number of processes to use [default: 1]\n"); - fprintf(stdout, " -r, --raw Run raw (UNIX) performance test\n"); - fprintf(stdout, " -X S, --max-xfer-size=S Maximum transfer buffer size [default: 1M]\n"); - fprintf(stdout, " -x S, --min-xfer-size=S Minimum transfer buffer size [default: 1K]\n"); - fprintf(stdout, "\n"); - fprintf(stdout, " F - is a filename.\n"); - fprintf(stdout, " N - is an integer >=0.\n"); - fprintf(stdout, " S - is a size specifier, an integer >=0 followed by a size indicator:\n"); - fprintf(stdout, "\n"); - fprintf(stdout, " K - Kilobyte\n"); - fprintf(stdout, " M - Megabyte\n"); - fprintf(stdout, " G - Gigabyte\n"); - fprintf(stdout, "\n"); - fprintf(stdout, " Example: 37M = 37 Megabytes\n"); - fprintf(stdout, "\n"); - fflush(stdout); + int myrank; + + MPI_Comm_rank(pio_comm_g, &myrank); + + if (myrank == 0) { + fflush(stdout); + fprintf(stdout, "usage: %s [OPTIONS]\n", prog); + fprintf(stdout, " OPTIONS\n"); + fprintf(stdout, " -h, --help Print a usage message and exit\n"); + fprintf(stdout, " -d N, --num-dsets=N Number of datasets per file [default:1]\n"); + fprintf(stdout, " -f S, --file-size=S Size of a single file [default: 64M]\n"); + fprintf(stdout, " -F N, --num-files=N Number of files [default: 1]\n"); + fprintf(stdout, " -H, --hdf5 Run HDF5 performance test\n"); + fprintf(stdout, " -i, --num-iterations Number of iterations to perform [default: 1]\n"); + fprintf(stdout, " -m, --mpiio Run MPI/IO performance test\n"); + fprintf(stdout, " -o F, --output=F Output raw data into file F [default: none]\n"); + fprintf(stdout, " -P N, --max-num-processes=N Maximum number of processes to use [default: 1]\n"); + fprintf(stdout, " -p N, --min-num-processes=N Minimum number of processes to use [default: 1]\n"); + fprintf(stdout, " -r, --raw Run raw (UNIX) performance test\n"); + fprintf(stdout, " -X S, --max-xfer-size=S Maximum transfer buffer size [default: 1M]\n"); + fprintf(stdout, " -x S, --min-xfer-size=S Minimum transfer buffer size [default: 1K]\n"); + fprintf(stdout, "\n"); + fprintf(stdout, " F - is a filename.\n"); + fprintf(stdout, " N - is an integer >=0.\n"); + fprintf(stdout, " S - is a size specifier, an integer >=0 followed by a size indicator:\n"); + fprintf(stdout, "\n"); + fprintf(stdout, " K - Kilobyte\n"); + fprintf(stdout, " M - Megabyte\n"); + fprintf(stdout, " G - Gigabyte\n"); + fprintf(stdout, "\n"); + fprintf(stdout, " Example: 37M = 37 Megabytes\n"); + fprintf(stdout, "\n"); + fflush(stdout); + } } #else /* H5_HAVE_PARALLEL */ diff --git a/perform/pio_perf.h b/perform/pio_perf.h index d954591..5ae3faa 100644 --- a/perform/pio_perf.h +++ b/perform/pio_perf.h @@ -39,6 +39,10 @@ typedef struct results_ { #define FAIL -1 #endif /* !FAIL */ +extern MPI_Comm pio_comm_g; /* Communicator to run the PIO */ +extern int pio_mpi_rank_g; /* MPI rank of pio_comm_g */ +extern int pio_mpi_nprocs_g; /* number of processes of pio_comm_g */ + #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ diff --git a/perform/pio_timer.h b/perform/pio_timer.h index 258ecc9..dc723a0 100644 --- a/perform/pio_timer.h +++ b/perform/pio_timer.h @@ -20,12 +20,12 @@ /* The different types of timers we can have */ typedef enum timer_type_ { - HDF5_MPI_OVERHEAD, HDF5_FILE_OPENCLOSE, - HDF5_GROUP_CREATE, HDF5_DATASET_CREATE, - HDF5_WRITE_FIXED_DIMS, - HDF5_READ_FIXED_DIMS, + HDF5_FINE_WRITE_FIXED_DIMS, + HDF5_FINE_READ_FIXED_DIMS, + HDF5_GROSS_WRITE_FIXED_DIMS, + HDF5_GROSS_READ_FIXED_DIMS, NUM_TIMERS } timer_type; |