27 files changed, 0 insertions, 2148 deletions
diff --git a/perform/Makefile b/perform/Makefile
deleted file mode 100644
index bc0f5d3..0000000
--- a/perform/Makefile
+++ /dev/null
@@ -1,966 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# perform/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Performance Makefile(.in)
-#
-
-
-pkgdatadir = $(datadir)/hdf5
-pkglibdir = $(libdir)/hdf5
-pkgincludedir = $(includedir)/hdf5
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am COPYING
-bin_PROGRAMS =  \
-	h5perf_serial$(EXEEXT)
-#bin_PROGRAMS = h5perf$(EXEEXT)
-check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_4)
-TESTS = $(check_PROGRAMS)
-subdir = perform
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-#am__EXEEXT_1 = h5perf$(EXEEXT) \
-#	perf$(EXEEXT)
-#am__EXEEXT_2 = benchpar$(EXEEXT) \
-#	mpi-perf$(EXEEXT)
-#am__EXEEXT_3 = $(am__EXEEXT_2)
-am__EXEEXT_4 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
-	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
-	$(am__EXEEXT_3)
-PROGRAMS = $(bin_PROGRAMS)
-benchpar_SOURCES = benchpar.c
-benchpar_OBJECTS = benchpar.$(OBJEXT)
-benchpar_LDADD = $(LDADD)
-benchpar_DEPENDENCIES = $(LIBHDF5)
-chunk_SOURCES = chunk.c
-chunk_OBJECTS = chunk.$(OBJEXT)
-chunk_LDADD = $(LDADD)
-chunk_DEPENDENCIES = $(LIBHDF5)
-am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT) \
-	pio_timer.$(OBJEXT)
-h5perf_OBJECTS = $(am_h5perf_OBJECTS)
-h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT) \
-	sio_timer.$(OBJEXT)
-h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
-h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-iopipe_SOURCES = iopipe.c
-iopipe_OBJECTS = iopipe.$(OBJEXT)
-iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-mpi_perf_SOURCES = mpi-perf.c
-mpi_perf_OBJECTS = mpi-perf.$(OBJEXT)
-mpi_perf_LDADD = $(LDADD)
-mpi_perf_DEPENDENCIES = $(LIBHDF5)
-overhead_SOURCES = overhead.c
-overhead_OBJECTS = overhead.$(OBJEXT)
-overhead_LDADD = $(LDADD)
-overhead_DEPENDENCIES = $(LIBHDF5)
-perf_SOURCES = perf.c
-perf_OBJECTS = perf.$(OBJEXT)
-perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-perf_meta_SOURCES = perf_meta.c
-perf_meta_OBJECTS = perf_meta.$(OBJEXT)
-perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-zip_perf_SOURCES = zip_perf.c
-zip_perf_OBJECTS = zip_perf.$(OBJEXT)
-zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
-	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
-	perf_meta.c zip_perf.c
-DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
-	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
-	perf_meta.c zip_perf.c
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
-ADD_PARALLEL_FILES = no
-AMTAR = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run tar
-AM_MAKEFLAGS = 
-AR = ar
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
-AWK = gawk
-BYTESEX = little-endian
-CC = gcc -fPIC
-CCDEPMODE = depmode=gcc3
-CC_VERSION = /usr/lib64/ccache/gcc -fPIC (gcc-4.3.2)
-
-# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
-# but which shouldn't be exported to h5cc for building other programs.
-CFLAGS =  -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
-CLEARFILEBUF = yes
-CODESTACK = no
-CONFIG_DATE = Tue Apr 21 10:41:53 CDT 2009
-CONFIG_MODE = production
-CONFIG_USER = abyrne@localhost.localdomain
-CPP = gcc -fPIC -E
-CPPFLAGS = -I/home/abyrne/HDF_Projects/SZIP/szip/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_POSIX_SOURCE -D_BSD_SOURCE    -DNDEBUG -UH5_DEBUG_API
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS =   
-CYGPATH_W = echo
-DEBUG_PKG = 
-DEFAULT_API_VERSION = v18
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-DEPRECATED_SYMBOLS = yes
-DIRECT_VFD = no
-DSYMUTIL = 
-DUMPBIN = 
-DYNAMIC_DIRS = -R/home/abyrne/HDF_Projects/SZIP/szip/lib 
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-EXTERNAL_FILTERS = deflate(zlib),szip(encoder)
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = 
-F9XMODFLAG = 
-F9XSUFFIXFLAG = 
-FC = g95
-FCFLAGS =   
-FCFLAGS_f90 = 
-FCLIBS = 
-FGREP = /bin/grep -F
-FILTERS = shuffle,fletcher32,nbit,scaleoffset
-FSEARCH_DIRS = 
-GPFS = no
-GREP = /bin/grep
-H5_CFLAGS = -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
-H5_CPPFLAGS =   -DNDEBUG -UH5_DEBUG_API
-H5_CXXFLAGS =  
-H5_FCFLAGS =  
-H5_LONE_COLON = yes
-H5_VERSION = 1.8.2-post13
-HADDR_T = 
-HAVE_DMALLOC = no
-HDF5_HL = yes
-HDF5_INTERFACES =  c++
-HDF_CXX = yes
-HDF_FORTRAN = no
-HID_T = 
-HL = hl
-HL_FOR = 
-HSIZE_T = 
-HSSIZE_T = 
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-INSTRUMENT = no
-INSTRUMENT_LIBRARY = no
-LD = /usr/bin/ld -m elf_x86_64
-LDFLAGS =  -L/home/abyrne/HDF_Projects/SZIP/szip/lib
-LIBOBJS = 
-LIBS =  -lsz -lz -lm 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LINUX_LFS = yes
-LIPO = 
-LL_PATH = /home/abyrne/HDF_Projects/SZIP/szip/lib
-LN_S = ln -s
-LTLIBOBJS = 
-LT_STATIC_EXEC = 
-MAINT = #
-MAKEINFO = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-MPE = no
-MPI_GET_SIZE = 
-NM = /usr/bin/nm -B
-NMEDIT = 
-OBJDUMP = objdump
-OBJECT_NAMELEN_DEFAULT_F = 
-OBJEXT = o
-OTOOL = 
-OTOOL64 = 
-PACKAGE = hdf5
-PACKAGE_BUGREPORT = help@hdfgroup.org
-PACKAGE_NAME = HDF5
-PACKAGE_STRING = HDF5 1.8.2-post13
-PACKAGE_TARNAME = hdf5
-PACKAGE_VERSION = 1.8.2-post13
-PARALLEL = no
-PATH_SEPARATOR = :
-PERL = perl
-PTHREAD = 
-RANLIB = ranlib
-ROOT = /home/abyrne/HDF_Projects/HDF5-C-1.8
-RUNPARALLEL = 
-RUNSERIAL = 
-R_INTEGER = 
-R_LARGE = 
-SEARCH = VPATH=$(srcdir) $(top_builddir)/src $(top_srcdir)/src
-SED = /bin/sed
-SETX = set -x
-SET_MAKE = 
-SHELL = /bin/sh
-SIZE_T = 
-STATIC_EXEC = no
-STATIC_SHARED = 
-STRICT_FORMAT_CHECKS = no
-STRIP = strip
-TESTPARALLEL = 
-THREADSAFE = no
-TIME = time
-TR = /usr/bin/tr
-TRACE_API = no
-UNAME_INFO = Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
-USE_FILTER_DEFLATE = yes
-USE_FILTER_FLETCHER32 = yes
-USE_FILTER_NBIT = yes
-USE_FILTER_SCALEOFFSET = yes
-USE_FILTER_SHUFFLE = yes
-USE_FILTER_SZIP = yes
-USINGMEMCHECKER = no
-VERSION = 1.8.2-post13
-WORDS_BIGENDIAN = no
-abs_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
-abs_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
-abs_top_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8
-abs_top_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8
-ac_ct_CC = gcc -fPIC
-ac_ct_CXX = 
-ac_ct_DUMPBIN = 
-ac_ct_FC = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = ${docdir}
-enable_shared = yes
-enable_static = yes
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lt_ECHO = echo
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target_alias = 
-top_builddir = ..
-top_srcdir = ..
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNTESTS instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNTESTS = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = $(bindir)/h5cc
-H5CC_PP = $(bindir)/h5pcc
-H5FC = $(bindir)/h5fc
-H5FC_PP = $(bindir)/h5pfc
-H5CPP = $(bindir)/h5c++
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
-INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
-#TEST_PROG_PARA = h5perf perf
-
-# Some programs are not built or run by default, but can be built by hand or by
-# specifying --enable-build-all at configure time.
-# Also, some of these programs should only be built in parallel.
-#PARA_BUILD_ALL = benchpar mpi-perf
-#BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
-
-# These are the programs that `make all' or `make tests' will build and which
-# `make check' will run. List them in the order they should be run.
-TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
-h5perf_SOURCES = pio_perf.c pio_engine.c pio_timer.c
-h5perf_serial_SOURCES = sio_perf.c sio_engine.c sio_timer.c
-
-# These are the files that `make clean' (and derivatives) will remove from
-# this directory.
-CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out
-
-# All of the programs depend on the main hdf5 library, and some of them
-# depend on test or tools library.
-LDADD = $(LIBHDF5)
-h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
-iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
-zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  perform/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  perform/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: # $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-benchpar$(EXEEXT): $(benchpar_OBJECTS) $(benchpar_DEPENDENCIES) 
-	@rm -f benchpar$(EXEEXT)
-	$(LINK) $(benchpar_OBJECTS) $(benchpar_LDADD) $(LIBS)
-chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) 
-	@rm -f chunk$(EXEEXT)
-	$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
-h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) 
-	@rm -f h5perf$(EXEEXT)
-	$(LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
-h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) 
-	@rm -f h5perf_serial$(EXEEXT)
-	$(LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
-iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) 
-	@rm -f iopipe$(EXEEXT)
-	$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
-mpi-perf$(EXEEXT): $(mpi_perf_OBJECTS) $(mpi_perf_DEPENDENCIES) 
-	@rm -f mpi-perf$(EXEEXT)
-	$(LINK) $(mpi_perf_OBJECTS) $(mpi_perf_LDADD) $(LIBS)
-overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) 
-	@rm -f overhead$(EXEEXT)
-	$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
-perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) 
-	@rm -f perf$(EXEEXT)
-	$(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS)
-perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) 
-	@rm -f perf_meta$(EXEEXT)
-	$(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS)
-zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) 
-	@rm -f zip_perf$(EXEEXT)
-	$(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-include ./$(DEPDIR)/benchpar.Po
-include ./$(DEPDIR)/chunk.Po
-include ./$(DEPDIR)/iopipe.Po
-include ./$(DEPDIR)/mpi-perf.Po
-include ./$(DEPDIR)/overhead.Po
-include ./$(DEPDIR)/perf.Po
-include ./$(DEPDIR)/perf_meta.Po
-include ./$(DEPDIR)/pio_engine.Po
-include ./$(DEPDIR)/pio_perf.Po
-include ./$(DEPDIR)/pio_timer.Po
-include ./$(DEPDIR)/sio_engine.Po
-include ./$(DEPDIR)/sio_perf.Po
-include ./$(DEPDIR)/sio_timer.Po
-include ./$(DEPDIR)/zip_perf.Po
-
-.c.o:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c $<
-
-.c.obj:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-#	source='$<' object='$@' libtool=yes \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
-	clean clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool ctags distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-binPROGRAMS install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNTESTS="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/perform/chunk b/perform/chunk
deleted file mode 100644
index e605d08..0000000
--- a/perform/chunk
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# chunk - temporary wrapper script for .libs/chunk
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The chunk program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file chunk.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'chunk'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/chunk.chkexe b/perform/chunk.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/chunk.chkexe
+++ /dev/null
diff --git a/perform/chunk.chklog b/perform/chunk.chklog
deleted file mode 100644
index 875bc00..0000000
--- a/perform/chunk.chklog
+++ /dev/null
@@ -1,50 +0,0 @@
-============================
- chunk  Test Log
-============================
-Test       CacheSz  ChunkSz    Effic
---------- -------- -------- --------
-Rowmaj-rd       25     0.50     1.00
-Rowmaj-rd       25     1.00     1.00
-Rowmaj-rd       25     1.50     0.75
-Rowmaj-rd       25     2.00     1.00
-Rowmaj-rd       25     2.50     0.83
-Rowmaj-rd       25     3.00     1.00
-Rowmaj-rd       25     3.50     0.87
-Rowmaj-rd       25     4.00     1.00
-Rowmaj-rd       25     4.50     0.91
-Rowmaj-rd       25     5.00     1.00
-Rowmaj-wr       25     0.50     0.50
-Rowmaj-wr       25     1.00     1.00
-Rowmaj-wr       25     1.50     0.45
-Rowmaj-wr       25     2.00     1.00
-Rowmaj-wr       25     2.50     0.57
-Rowmaj-wr       25     3.00     1.00
-Rowmaj-wr       25     3.50     0.63
-Rowmaj-wr       25     4.00     1.00
-Rowmaj-wr       25     4.50     0.72
-Rowmaj-wr       25     5.00     1.00
-Diag-rd         25     0.50     0.26
-Diag-rd         25     1.00     0.51
-Diag-rd         25     1.50     0.62
-Diag-rd         25     2.00     1.00
-Diag-rd         25     2.50     0.72
-Diag-rd         25     3.00     0.80
-Diag-rd         25     3.50     0.78
-Diag-rd         25     4.00     1.00
-Diag-rd         25     4.50     0.84
-Diag-rd         25     5.00     0.89
-Diag-wr         25     0.50     0.13
-Diag-wr         25     1.00     0.26
-Diag-wr         25     1.50     0.31
-Diag-wr         25     2.00     1.00
-Diag-wr         25     2.50     0.41
-Diag-wr         25     3.00     0.53
-Diag-wr         25     3.50     0.49
-Diag-wr         25     4.00     1.00
-Diag-wr         25     4.50     0.58
-Diag-wr         25     5.00     0.69
-0.31user 0.12system 0:00.46elapsed 92%CPU (0avgtext+0avgdata 0maxresident)k
-16inputs+7952outputs (0major+9524minor)pagefaults 0swaps
-
-Finished testing chunk 
-============================
diff --git a/perform/chunk.h5 b/perform/chunk.h5
deleted file mode 100644
index 26ed19f..0000000
--- a/perform/chunk.h5
+++ /dev/null
diff --git a/perform/h5perf_serial b/perform/h5perf_serial
deleted file mode 100644
index 06329d0..0000000
--- a/perform/h5perf_serial
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# h5perf_serial - temporary wrapper script for .libs/h5perf_serial
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The h5perf_serial program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file sio_perf.o sio_engine.o sio_timer.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'h5perf_serial'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/h5perf_serial.chkexe b/perform/h5perf_serial.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/h5perf_serial.chkexe
+++ /dev/null
diff --git a/perform/h5perf_serial.chklog b/perform/h5perf_serial.chklog
deleted file mode 100644
index d1bef16..0000000
--- a/perform/h5perf_serial.chklog
+++ /dev/null
@@ -1,56 +0,0 @@
-============================
- h5perf_serial  Test Log
-============================
-HDF5 Library: Version 1.8.2-post13
-==== Parameters ====
-IO API=posix hdf5 
-Number of iterations=1
-Dataset size=100 200 
-Transfer buffer size=10 20 
-Dimension access order=1 2 
-HDF5 data storage method=Contiguous
-HDF5 file driver=sec2
-Env HDF5_PREFIX=not set
-==== End of Parameters ====
-
-Transfer Buffer Size (bytes): 200
-File Size(MB): 0.02
-        IO API = POSIX
-            Write (1 iteration(s)):
-                Maximum Throughput:   7.20 MB/s
-                Average Throughput:   7.20 MB/s
-                Minimum Throughput:   7.20 MB/s
-            Write Open-Close (1 iteration(s)):
-                Maximum Throughput:   7.09 MB/s
-                Average Throughput:   7.09 MB/s
-                Minimum Throughput:   7.09 MB/s
-            Read (1 iteration(s)):
-                Maximum Throughput:  18.81 MB/s
-                Average Throughput:  18.81 MB/s
-                Minimum Throughput:  18.81 MB/s
-            Read Open-Close (1 iteration(s)):
-                Maximum Throughput:  18.68 MB/s
-                Average Throughput:  18.68 MB/s
-                Minimum Throughput:  18.68 MB/s
-        IO API = HDF5
-            Write (1 iteration(s)):
-                Maximum Throughput:  18.13 MB/s
-                Average Throughput:  18.13 MB/s
-                Minimum Throughput:  18.13 MB/s
-            Write Open-Close (1 iteration(s)):
-                Maximum Throughput:   5.67 MB/s
-                Average Throughput:   5.67 MB/s
-                Minimum Throughput:   5.67 MB/s
-            Read (1 iteration(s)):
-                Maximum Throughput:  30.72 MB/s
-                Average Throughput:  30.72 MB/s
-                Minimum Throughput:  30.72 MB/s
-            Read Open-Close (1 iteration(s)):
-                Maximum Throughput:  13.86 MB/s
-                Average Throughput:  13.86 MB/s
-                Minimum Throughput:  13.86 MB/s
-0.03user 0.01system 0:00.10elapsed 50%CPU (0avgtext+0avgdata 0maxresident)k
-88inputs+232outputs (0major+7732minor)pagefaults 0swaps
-
-Finished testing h5perf_serial 
-============================
diff --git a/perform/iopipe b/perform/iopipe
deleted file mode 100644
index c596b24..0000000
--- a/perform/iopipe
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# iopipe - temporary wrapper script for .libs/iopipe
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The iopipe program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file iopipe.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'iopipe'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/iopipe.chkexe b/perform/iopipe.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/iopipe.chkexe
+++ /dev/null
diff --git a/perform/iopipe.chklog b/perform/iopipe.chklog
deleted file mode 100644
index 583e8f6..0000000
--- a/perform/iopipe.chklog
+++ /dev/null
@@ -1,24 +0,0 @@
-============================
- iopipe  Test Log
-============================
-fill raw        =============================================
-fill hdf5       =============================================
-out raw         =============================================
-out hdf5        =============================================
-in raw          =============================================
-in hdf5         =============================================
-in hdf5 partial =============================================
-I/O request size is 1000000.0MB
-Before getrusage() call
-fill raw        0.01user 0.00system 0.01elapsed 3245.99MB/s
-fill hdf5       0.00user 0.00system 0.01elapsed 7754.61MB/s
-out raw         0.00user 0.02system 0.02elapsed 2195.15MB/s
-out hdf5        0.00user 0.02system 0.02elapsed 2154.40MB/s
-in raw          0.00user 0.02system 0.02elapsed 2468.22MB/s
-in hdf5         0.00user 0.01system 0.01elapsed 5232.41MB/s
-in hdf5 partial 0.02user 0.01system 0.03elapsed 1619.29MB/s
-0.09user 0.30system 0:02.44elapsed 16%CPU (0avgtext+0avgdata 0maxresident)k
-264inputs+4024outputs (2major+16447minor)pagefaults 0swaps
-
-Finished testing iopipe 
-============================
diff --git a/perform/iopipe.h5 b/perform/iopipe.h5
deleted file mode 100644
index 1048f34..0000000
--- a/perform/iopipe.h5
+++ /dev/null
diff --git a/perform/iopipe.raw b/perform/iopipe.raw
deleted file mode 100644
index 7c2624a..0000000
--- a/perform/iopipe.raw
+++ /dev/null
diff --git a/perform/overhead b/perform/overhead
deleted file mode 100644
index 4373671..0000000
--- a/perform/overhead
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# overhead - temporary wrapper script for .libs/overhead
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The overhead program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file overhead.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'overhead'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/overhead.chkexe b/perform/overhead.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/overhead.chkexe
+++ /dev/null
diff --git a/perform/overhead.chklog b/perform/overhead.chklog
deleted file mode 100644
index c2e61d2..0000000
--- a/perform/overhead.chklog
+++ /dev/null
@@ -1,15 +0,0 @@
-============================
- overhead  Test Log
-============================
-Style   Bytes/Chunk
------   -----------
-forward   41.320
-reverse   43.416
-inward    70.664
-outward   41.320
-random    53.896
-0.11user 0.05system 0:00.23elapsed 74%CPU (0avgtext+0avgdata 0maxresident)k
-16inputs+600outputs (0major+7761minor)pagefaults 0swaps
-
-Finished testing overhead 
-============================
diff --git a/perform/perf_meta b/perform/perf_meta
deleted file mode 100644
index 4ce87eb..0000000
--- a/perform/perf_meta
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# perf_meta - temporary wrapper script for .libs/perf_meta
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The perf_meta program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file perf_meta.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'perf_meta'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/perf_meta.chkexe b/perform/perf_meta.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/perf_meta.chkexe
+++ /dev/null
diff --git a/perform/perf_meta.chklog b/perform/perf_meta.chklog
deleted file mode 100644
index 14c8e37..0000000
--- a/perform/perf_meta.chklog
+++ /dev/null
@@ -1,23 +0,0 @@
-============================
- perf_meta  Test Log
-============================
-		Performance result of metadata for datasets and attributes
-
-1.  Create 8 attributes for each of 16 existing datasets
-	H5Dopen2:		avg=0.000022s;	max=0.000039s;	min=0.000019s
-	H5Dclose:		avg=0.000066s;	max=0.000905s;	min=0.000009s
-	H5A(create & close):	avg=0.000029s;	max=0.002232s;	min=0.000008s
-2.  Create 8 attributes for each of 16 new datasets
-	H5Dcreate2:		avg=0.000025s;	max=0.000035s;	min=0.000021s
-	H5Dclose:		avg=0.000002s;	max=0.000003s;	min=0.000002s
-	H5A(create & close):	avg=0.000010s;	max=0.000020s;	min=0.000008s
-3.  Create 2 attributes for each of 16 existing datasets for 4 times
-	H5Dopen2:		avg=0.000065s;	max=0.002824s;	min=0.000019s
-	H5Dclose:		avg=0.000009s;	max=0.000012s;	min=0.000008s
-	H5A(create & close):	avg=0.000013s;	max=0.000022s;	min=0.000009s
-All metadata performance tests passed.
-0.03user 0.02system 0:00.15elapsed 37%CPU (0avgtext+0avgdata 0maxresident)k
-32inputs+976outputs (0major+7823minor)pagefaults 0swaps
-
-Finished testing perf_meta 
-============================
diff --git a/perform/x-diag-rd.dat b/perform/x-diag-rd.dat
deleted file mode 100644
index f5588f6..0000000
--- a/perform/x-diag-rd.dat
+++ /dev/null
@@ -1,11 +0,0 @@
-0.5 0.256466
-1 0.508621
-1.5 0.625
-2 1
-2.5 0.71875
-3 0.801887
-3.5 0.77877
-4 1
-4.5 0.840372
-5 0.892857
-
diff --git a/perform/x-diag-wr.dat b/perform/x-diag-wr.dat
deleted file mode 100644
index d3e86b1..0000000
--- a/perform/x-diag-wr.dat
+++ /dev/null
@@ -1,11 +0,0 @@
-0.5 0.128233
-1 0.256522
-1.5 0.314748
-2 1
-2.5 0.410714
-3 0.53125
-3.5 0.485767
-4 1
-4.5 0.578488
-5 0.690955
-
diff --git a/perform/x-gnuplot b/perform/x-gnuplot
deleted file mode 100644
index c6d8f44..0000000
--- a/perform/x-gnuplot
+++ /dev/null
@@ -1,44 +0,0 @@
-set yrange [0:1.2]
-set ytics 0, 0.1, 1
-set xlabel "Request size as a fraction of chunk size"
-set ylabel "Efficiency"
-set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)"
-set terminal postscript
-set output "x-rowmaj-rd.ps"
-plot "x-rowmaj-rd.dat" title "RowMaj-Read" with lines
-set terminal x11
-replot
-pause -1
-set yrange [0:1.2]
-set ytics 0, 0.1, 1
-set xlabel "Request size as a fraction of chunk size"
-set ylabel "Efficiency"
-set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)"
-set terminal postscript
-set output "x-rowmaj-wr.ps"
-plot "x-rowmaj-wr.dat" title "RowMaj-Write" with lines
-set terminal x11
-replot
-pause -1
-set yrange [0:1.2]
-set ytics 0, 0.1, 1
-set xlabel "Request size as a fraction of chunk size"
-set ylabel "Efficiency"
-set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)"
-set terminal postscript
-set output "x-diag-rd.ps"
-plot "x-diag-rd.dat" title "Diag-Read" with lines
-set terminal x11
-replot
-pause -1
-set yrange [0:1.2]
-set ytics 0, 0.1, 1
-set xlabel "Request size as a fraction of chunk size"
-set ylabel "Efficiency"
-set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)"
-set terminal postscript
-set output "x-diag-wr.ps"
-plot "x-diag-wr.dat" title "Diag-Write" with lines
-set terminal x11
-replot
-pause -1
diff --git a/perform/x-rowmaj-rd.dat b/perform/x-rowmaj-rd.dat
deleted file mode 100644
index 43c1bcb..0000000
--- a/perform/x-rowmaj-rd.dat
+++ /dev/null
@@ -1,11 +0,0 @@
-0.5 1
-1 1
-1.5 0.750469
-2 1
-2.5 0.833333
-3 1
-3.5 0.869565
-4 1
-4.5 0.909091
-5 1
-
diff --git a/perform/x-rowmaj-wr.dat b/perform/x-rowmaj-wr.dat
deleted file mode 100644
index 600859b..0000000
--- a/perform/x-rowmaj-wr.dat
+++ /dev/null
@@ -1,11 +0,0 @@
-0.5 0.5
-1 1
-1.5 0.445931
-2 1
-2.5 0.568182
-3 1
-3.5 0.633914
-4 1
-4.5 0.719424
-5 1
-
diff --git a/perform/zip_perf b/perform/zip_perf
deleted file mode 100644
index 22213f6..0000000
--- a/perform/zip_perf
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# zip_perf - temporary wrapper script for .libs/zip_perf
-# Generated by ltmain.sh (GNU libtool) 2.2.6
-#
-# The zip_perf program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='/bin/sed -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file zip_perf.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.2.6'
-  notinst_deplibs=' ../src/libhdf5.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    ECHO="echo"
-    file="$0"
-    # Make sure echo works.
-    if test "X$1" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-      # Yippee, $ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe $ECHO will work.
-      exec /bin/sh "$0" --no-reexec ${1+"$@"}
-    fi
-  fi
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'zip_perf'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	echo "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    echo "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi
diff --git a/perform/zip_perf.chkexe b/perform/zip_perf.chkexe
deleted file mode 100644
index e69de29..0000000
--- a/perform/zip_perf.chkexe
+++ /dev/null
diff --git a/perform/zip_perf.chklog b/perform/zip_perf.chklog
deleted file mode 100644
index 156146f..0000000
--- a/perform/zip_perf.chklog
+++ /dev/null
@@ -1,38 +0,0 @@
-============================
- zip_perf  Test Log
-============================
-Filesize: 67108864
-Compression Level: 6
-Buffer size == 128KB
-	Uncompressed Write Time: 0.14s
-	Uncompressed Write Throughput: 474.05MB/s
-	Compression Ratio: 0.00113678
-	Compressed Write Time: 0.75s
-	Compressed Write Throughput: 85.06MB/s
-	Compression Time: 0.738815s
-Buffer size == 256KB
-	Uncompressed Write Time: 0.12s
-	Uncompressed Write Throughput: 556.16MB/s
-	Compression Ratio: 0.00105667
-	Compressed Write Time: 0.74s
-	Compressed Write Throughput: 86.99MB/s
-	Compression Time: 0.733302s
-Buffer size == 512KB
-	Uncompressed Write Time: 0.12s
-	Uncompressed Write Throughput: 547.23MB/s
-	Compression Ratio: 0.0010128
-	Compressed Write Time: 0.76s
-	Compressed Write Throughput: 84.15MB/s
-	Compression Time: 0.758976s
-Buffer size == 1MB
-	Uncompressed Write Time: 0.12s
-	Uncompressed Write Throughput: 540.06MB/s
-	Compression Ratio: 0.000990868
-	Compressed Write Time: 0.76s
-	Compressed Write Throughput: 84.04MB/s
-	Compression Time: 0.760352s
-2.94user 0.63system 0:03.75elapsed 95%CPU (0avgtext+0avgdata 0maxresident)k
-32inputs+528768outputs (0major+34635minor)pagefaults 0swaps
-
-Finished testing zip_perf 
-============================