diff options
Diffstat (limited to 'release_docs/INSTALL_Windows_Short_INTEL.TXT')
-rwxr-xr-x | release_docs/INSTALL_Windows_Short_INTEL.TXT | 392 |
1 files changed, 0 insertions, 392 deletions
diff --git a/release_docs/INSTALL_Windows_Short_INTEL.TXT b/release_docs/INSTALL_Windows_Short_INTEL.TXT deleted file mode 100755 index 9c45d23..0000000 --- a/release_docs/INSTALL_Windows_Short_INTEL.TXT +++ /dev/null @@ -1,392 +0,0 @@ -************************************************************************ -*HDF5 Build and Install Instructions for Windows XP with INTEL Compiler* -* (Short Version) * -************************************************************************ - -Notes: This short instruction is written for users who want to quickly - build HDF5 library and tools from the HDF5 source code package - with Intel Fortran 9.1 Compiler with Microsoft Visual Studio .NET or 2005 - but do not want to know HDF5 building and installation details on - Windows XP. - - For detailed HDF5 build and install information, or if you have - trouble following any steps in the instructions, please refer to - INSTALL_Windows.txt for further information. - - For users who would like to build and test HDF5 package from the - command line, please refer to - INSATLL_Windows_From_Command_Line.txt. - - We no longer support the Intel C compiler, Intel Fortran 7.x or 8.x. - However, if you would still like to use one of these compilers, - documentation is available online at - http://hdfgroup.org/windows/docs/hdf518/dep/Install_Windows_Dep_Intel.txt - -WARNINGS: - Please read CAREFULLY about HDF5 build and install preconditions - and notes in INSTALL_Windows.txt before starting reading this - instruction. - -======================================================================== - Extra Preconditions and Notes -======================================================================== - - a. Setup Szip Library for Intel Compiler. - - Intel compilers use different Szip library from other compilers. - Szip source codes or binaries for Intel compiler can be downloaded - from the following address: - - ftp://ftp.hdfgroup.org/lib-external/szip/2.0/bin/windows. - - b. Set up path for external libraries and headers - - Skip this part if you don't want to use ANY compression features - provided by HDF5. Instead, read Section V of Install_Windowx.txt. - - You have to read this part even if you want to use only Zlib - or Szip. You also need to read Section V of Install_Windowx.txt. - - Invoke Microsoft Visual C++ .Net 2003 or 2005. From the main - menu, Go to Tools > Options > Intel(R) Fortran. - In the right panel, make sure your "Selected Compiler" is Intel Fortran 9.1. - Click the right-most box for "Libraries", - Add Zlib and Szip Library Path (c:\zlib123\lib, c:\szip\dll for example) - Click rightmost box for "Includes", - Add Zlib and Szip header path (c:\zlib123\include c:\szip\include, for example). - Then click "OK". - -======================================================================== - Part I. Build with Intel Fortran - Compiler 9.1 under MSVS C++ .Net 2003 / 2005 Environment -======================================================================== - - Note: This step will build HDF5 Static and DLL C and C++ - Library using .Net 2003 or Visual Studio 2005 Compiler as well as - HDF5 Static and High Level Fortran Library using Intel - Fortran 9.1 Compiler. - - - 1.1 Open all.dsw and Convert Project Files (.dsp) to Visual - C++ .Net Format (.vcproj) - - Invoke Microsoft Visual C++ .Net or 2005. From the main menu, go to - "File" and select "Open Solution". In the "Open Solution" window, - Change "Files of type" to "All Project Files". Choose "all.dsw" - under the directory c:\MyHDFstuff\hdf5\windows\proj\all. In the - pop up window, choose "Yes To All" to convert all project files - to Visual C++ .Net project format. - - 1.2 Extract Compaq Fortran Project Files - - a. Select project "flush1_fortran" in the Solution Explorer - window. In the Project menu, select - "Extract Compaq Visual Fortran Project". - - Do the same thing for the following project files, but for now, skip - the projects labelled "**SKIP**": - - flush1_fortrandll - flush2_fortran - flush2_fortrandll - hdf5_fortran - hdf5_fortrandll - **SKIP** libtest_fortran - libtest_fortrandll - testhdf5_fortran - testhdf5_fortrandll - **SKIP** hdf5_hl_fortran - hdf5_hl_fortrandll - hl_test_image_fortran - hl_test_image_fortrandll - hl_test_lite_fortran - hl_test_lite_fortrandll - hl_test_table_fortran - hl_test_table_fortrandll - - - b. Select project "libtest_fortran" in the Solution - Explorer window. In the Project menu, select - "Extract Compaq Visual Fortran Project". Since Project - file "libtest_fortran" contain both C and Fortran code, - you will be asked to specify which project, either - Fortran or C/C++, will serve as the main project for - this mixed language projects. Choose - "The Intel Fortran project" as the the main project and - click "OK". - - Do the same thing for hdf5_hl_fortran. - - 1.3 Add project dependencies - - - To check the project dependencies: - - Right click the selected project, you should see "Project Dependencies" - on the menu, click "Project Dependencies", You should see a "Project - Dependencies" panel, with the selected project and the projects it - depends on checked under "Depends on" list. - - Each of the following projects will need libtest_fortran_lib added - to its list of dependencies: - - libtest_fortran - flush1_fortran - flush2_fortran - testhdf5_fortran - - Each of the following projects will need hdf5_hl_fortran_lib added - to its list of dependencies: - - hdf5_hl_fortran - hl_test_image_fortran - hl_test_lite_fortran - hl_test_table_fortran - - - 1.4 Change Project Output - - Right click on the project "hdf5_hl_fortran" and select - "Properties". At the top left of the Property Pages, select - "Debug" for the Configuration. Then, in the left pane, go to - Librarian > General. Change the Output File from - "$(OutDir)/$(ProjectName).lib" to "$(OutDir)/$(ProjectName)d.lib". - Then click Ok. - - Similarly, right-click on "hdf5_hl_fortran_lib", and select - "Properties". At the top left of the Property Pages, select - "Debug" for the Configuration. Then, in the left pane, go to - Librarian > General. Change the Output File from - "..\..\..\proj\hdf5_hl_fortran\Debug\hdf5_hl_fortrand.lib" - to ..\..\..\proj\hdf5_hl_fortran\Debug\hdf5_hl_fortrand_lib.lib". - - Then, in the top left corner again, change the Configuration to - "Release". Inside of Librarian > General, change the Output File - from ".\..\..\..\proj\hdf5_hl_fortran\Release\hdf5_hl_fortran.lib" - to ".\..\..\..\proj\hdf5_hl_fortran\Release\hdf5_hl_fortran_lib.lib". - - - - 1.5 Building HDF5 C/C++/Fortran Libraries and Tools - - Select "Build", then Select "Configuration Manager". - - Select "Debug" or "Release" - - Disable ttsafedll - - - Select "ok". Select "Build" -> "Build" or "Rebuild All" to - build Debug or Release version of HDF5 C, C++, fortran - Library using Intel Fortran 9.1 Compiler with .Net 2003 or 2005. - -======================================================================== - Part II. Test HDF5 Static and High Level Fortran Library -======================================================================== - - We provide 2 options for users to test HDF5 libraries and tools. - - Option 1: Automatic testings - - HDF5 comes with various test suites, all of which can be tested - with hdf5check.bat batch file in c:\MyHDFstuff\hdf5 directory. - - hdf5check batch file can used to test HDF libraries with Fortran with - the following options: - - hdf5check enablefortran test HDF5 C/FORTRAN libraries and - tools - - - hdf5check enableall test HDF5 C/C++/FORTRAN libraries - and tools - To use this option, HDF5 C++ and - Fortran libraries must have been - built. - - Invoke a command prompt window and run hdf5check with appropriate - option. - - Test results are saved in two files: - - c:\MyHDFstuff\hdf5\check_results.txt - - c:\MyHDFstuff\hdf5\tests_results.txt. - - In general, you only need to check tests_results.txt. If all the - tests passed, then you do not have to check check_results.txt. - If some tests failed, check check_results.txt can help you - figure out what was wrong. - - - Option 2: Step-by-step HDF5 libraries and tools testings - - Note: This section provides step-by-step instructions for testing the - Fortran librariy and tools only. To test the rest of the HDF5 library - and tools, please see Section II, Step 2 of Install_Windowx.txt. - - - a. Test HDF5 Static Fortran Library - - Go to directory c:\myHDFstuff\hdf5\fortran\test, Run batch file - testhdf5_fortran.bat with the following two options to test - fortran static library - - testhdf5_fortran release >> "Your output file name" - testhdf5_fortran debug >> "Your output file name" - - Check your output files, there should be no "failures" at all. - - b. Test HDF5 High Level Fortran Library - - Go to directory c:\myHDFstuff\hdf5\hl\fortran\test, Run batch file - testhdf5_fortran.bat with the following two options to test - fortran static library - - test_hdf5_hl_fortran release >> "Your output file name" - test_hdf5_hl_fortran debug >> "Your output file name" - - Check your output files, there should be no "failures" at all. - -======================================================================== - Part III. (Optional) Build HDF5 Fortan and HL Fortran Examples -======================================================================== - - Note: This section only covers building Fortran and HL Fortran examples. - For other examples, please see Section III of Install_Windowx.txt. - - To build and test HDF5 Fortran example: - --------------------------------------- - - 1. Invoke the Intel Fortran Compiler 9.1 or above under Microsoft - Visual Studio development environment, go to "File" and select - the "Open Workspace" option. - - Then open the workspace - c:\MyHDFstuff\hdf5\windows\fortran\examples\allf90examples\allf90examples.dsw. - - 2. Select "Build", then Select "Set Active Configuration". - - 2.1 To build debug versions of Fortran examples. - - In "Project configurations", select "allf90examples -- Win32 Debug", - select "ok". Select "Build" -> "Build" or "Rebuild All" to - build debug version of project "allf90examples". - - 2.2 To build release versions of Fortran examples. - - In "Project configurations", select "allf90examples -- Win32 Release", - select "ok". Select "Build" -> "Build" or "Rebuild All" to - build release version of project "allf90examples". - - When the debug build or release build is done, there should be the - following subdirectories in c:\MyHDFstuff\hdf5\fortran\examples\ - - attreexampletest - attreexampletestdll - compoundtest - compoundtestdll - dsetexampletest - dsetexampletestdll - fileexampletest - fileexampletestdll - groupexampletest - groupexampletestdll - grpdsetexampletest - grpdsetexampletestdll - grpittest - grpittestdll - grpsexampletest - grpsexampletestdll - hyperslabtest - hyperslabtestdll - mountexampletest - mountexampletest - refobjexampletest - refobjexampletestdll - refregexampletest - refregexampletestdll - rwdsetexampletest - rwdsetexampletestdll - selecteletest - selecteletestdll - - 3. Invoke a command prompt window and run the batch file - Installf90Examples.bat which resides in the top level directory - (c:\MyHDFstuff\hdf5). This file creates 4 new directories, - f90examplesREL, f90examplesRELDLL, f90examplesDBG, and - f90examplesDBGDLL, in the c:\MyHDFstuff\fortran\examples directory - and places all the executables in it. Both the release and debug - versions of the examples should be built before this step is done. - - - To build and test HDF5 High Level Fortran examples: - --------------------------------------------------- - - 1. Invoke Compaq Visual Fortran 9.1, open the workspace - - c:\MyHDFstuff\hdf5\windows\hl\fortran\examples\ (continue next line) - allhlf90examples\allhlf90examples.dsw - - 2. Select "Build", then Select "Set Active Configuration". - - 2.1 To build debug versions of High Level Fortran examples. - In "Project configurations", select - "allhlf90examples -- Win32 Debug", select "ok". Select - "Build" -> "Build" or "Rebuild All" to build debug version - of project "allhlf90examples". - - 2.2 To build release versions of Fortran examples. - In "Project configurations", select - "allhlf90examples -- Win32 Release", select "ok". Select - "Build" -> "Build" or "Rebuild All" to build release version - of project "allhlf90examples". - - When the debug build or release build is done, there should be the - following subdirectories in c:\MyHDFstuff\hdf5\hl\fortran\examples - - ex_lite - ex_litedll - - 3. Invoke a command prompt window and run the batch file - Install_hlf90examples.bat which resides in the top level directory - (c:\MyHDFstuff\hdf5). This file creates 4 new directories, - HLf90examplesRELEASE, HLf90examplesRELEASEDLL, HLf90examplesDEBUG, - and HLf90examplesDEBUGDLL, in the - c:\MyHDFstuff\hdf5\hl\fortran\examples directory and places all - the executables in it. Both the release - and debug versions of the examples should be built before this - step is done. - - 4. We provide a batch file named test_hl_f90examples.bat in - c:\MyHDFstuff\hdf5\hl\fortran\examples directory for you to test - HDF5 high level fortran examples. - - test_hl_f90examples.bat batch file has 4 options: - - Options purpose - - test_hl_f90examples release -- for release version - - test_hl_f90examples release dll -- for release DLL version - - test_hl_f90examples debug -- for debug version - - test_hl_f90examples debug dll -- for debug DLL version - - Invoke a command prompt window and run test_hl_f90examples with - appropriate options. - - When you run "test_hl_f90examples release", the output will look - like: - - release version of High Level Fortran examples PASSED - - Similar messages should be generated with another three options - If the high level Fortran examples are built successfully. - - - -*********************************************************************** -Please send email to help@hdfgroup.org for further assistance. - |