diff options
Diffstat (limited to 'release_docs/RELEASE.txt')
| -rw-r--r-- | release_docs/RELEASE.txt | 1168 |
1 files changed, 120 insertions, 1048 deletions
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index f1f58b6..881865b 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -1,32 +1,20 @@ -HDF5 version 1.8.0 currently under development +HDF5 version 1.9.5 currently under development ================================================================================ INTRODUCTION -This document describes the differences between HDF5-1.6.* and -Hdf5 1.8.0 release candidate "HDF5-1.8.0-rc*", and contains information -on the platforms tested and known problems in HDF5-1.8.0-rc*. -For more details check the HISTORY.txt file in the HDF5 source. - - -Links to HDF5 1.8.0-rc* source code, documentation, and additional materials -can be found on THG's development server (www.hdfgroup.uiuc.edu) at the -following location: - http://www.hdfgroup.uiuc.edu/HDF5/release/beta/obtain518.html -User documentation for the beta can be accessed directly at this location: - http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/doc/ - -New features of the upcoming 1.8.0 release are described in -the "What's New in 1.8.0?" document: - http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/WhatsNew180.html - -New and modified APIs are described briefly in - http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/WhatsNew180.html -and will be listed in the "HDF5 Software Changes" document: - http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/doc/ADGuide/Changes.html +This document describes the differences between HDF5-1.9.0 and +HDF5 1.9.x snapshot, and contains information on the platforms +tested and known problems in HDF5-1.9.x. +For more details check the HISTORY*.txt files in the HDF5 source. +Links to HDF5 1.9.x source code can be found on THG's development +FTP server at the following location: + ftp://ftp.hdfgroup.uiuc.edu/pub/outgoing/hdf5/snapshots +User documentation for the snapshot can be accessed directly at this location: + http://www.hdfgroup.uiuc.edu/HDF5/doc_dev_snapshot/H5_dev/ For more information, see the HDF5 home page: @@ -41,7 +29,7 @@ CONTENTS - New Features - Support for new platforms and languages -- Bug Fixes since HDF5-1.6.0 +- Bug Fixes since HDF5-1.8.0 - Platforms Tested - Known Problems @@ -50,940 +38,71 @@ New Features ============ Configuration: - -------------- - - Removed stream-vfd from the HDF5 library. - AKC 2007/11/19. - - Updated versions of autotools. HDF5 now uses automake 1.10.0, - autoconf 2.61, and libtool 1.5.22. MAM - 2007/7/25. - - Changed default fortran compiler to g95 when gcc is used. - AKC - 2007/2/17. - - 'make check-vfd' can now be run from the top level directory. Not all - tests that 'make check' invokes work with certain Virtual File Drivers, - so those tests have been skipped. - MAM 2006/7/17 - - Added the variable HDF5TestExpress to control how long tests run. - Setting it to a value between 0 and 3 controls how thoroughly the - library is tested, with 0 being an "exhaustive run" and 3 being a - very quick "smoke test." 1 (a "full run") is the default. - -JML 2006/6/21 - - If both shared and static libraries are installed, now both will be - tested during 'make install'. -MAM 2006/06/21 - - Added support to explicity enable stream_vfd or shared libraries - when using parallel via the '--enable-stream_vfd' and - '--enable-shared' options, respectively. If not explicity defined, - These settings default to enabled when parallel is not used, - and disabled when parallel is used. -MAM 2006/06/17 - - Remove the flexible parallel code and the --enable-fphdf5 - configure option, it was never up to production standards - anyway. -QAK 2006/4/20 - - Added a macro hdf5_mpi_special_collective_io_works to filter out - some mpi-io packages that don't support collective IO for no IO - contributions in some processes. -KY 2006/2/16 - - Added -shlib option to link against installed shared libraries to - h5c++ and h5fc. -JML 2005/11/1 - - Added --enable-build-all option to configure, which only developers - should need to use. -JML 2005/10/24 - - Configure uses the 'TR' variable to let the user override the path - to the 'tr' utility. -JML 2005/10/17 - - Configure can recognize -lmpich as a form of MPI library. -AKC- - 2005/9/28. - - MD5 checksumming has been added to snapshot releases. Release - tarballs will be accompanied by .md5 checksum files, which can - be verified using the md5sum utility. -JML 2005/9/6 - - Some configure flags are incompatible (e.g., the C++ APIs cannot - be built using the parallel version of HDF5). configure will now - output errors when some common incompatible features are used - together. -JML 2005/9/6 - - A new API function, H5Tis_hard(), was added to the library. It - checks if a conversion function is a compiler (hard) conversion. - SLU - 2005/9/6 - - t_mpi will run the test_mpio_derived_dtype by default unless it is - known not working (indicated by macro H5_MPI_COMPLEX_DERIVED_DATATYPE_WORKS - not defined.) -AKC- 2005/8/23. - - Test execution has changed in a number of ways: - When make is invoked in parallel (using -j), sequential tests - are now executed as parallel make targets. This should make them - finish more quickly on machines with multiple processors. - Since test output is garbled when they are executed by parallel make, - tests now dump their output to foo.log files and foo.logsh files - (for test scripts). These logs are printed to the screen only - when a test fails or when all tests in the current directory have - completed successfully. - When tests pass, they will create a foo.chkexe file. - This prevents the test from executing again until the test or - main library changes. - All files generated by tests (*.chkexe, *.log, and any *.h5 files - created) can be removed by invoking 'make check-clean'. - Sequential and parallel library tests can now be invoked separately. - 'make check-s' will execute only sequential tests, and 'make check-p' - will execute only parallel tests. 'make check' will still execute - all tests. - -JML 2005/08/03 - - On windows, all.zip is deprecated. users should - read INSTALL_Windows.txt to know the details. - Reasons to deprecate all.zip: - 1. Avoid confliction for windows programmers - 2. Decrease size of CVS tree by adding all.zip - 3. Avoid using winzip as the intermediate step - --KY 2005/04/22 - - When HDF5 is created as a shared library, it now uses libtool's - shared library versioning scheme. -JML 2005/04/18 - - HDF5 now uses automake 1.9.5 to generate Makefiles.in. - This has a number of effects on users: - The Fortran compiler should be set using the environment - variable $FC, not $F9X. F9X still works, but is depreciated. - The output of make may be different. This should be only a - cosmetic effect. - make depened (or make dep) is no longer recognized, since automake - handles dependency tracking. - Some new configure options exist. --enable-dependency-tracking - and --disable-dependency-tracking are used to control automake's - dependency tracking. Dependencies are on by default *on most - platforms and compilers*. If --enable-dependency-tracking is - used, they will be enabled on any platform. However, this can - slow down builds or even cause build errors in some cases. - Likewise, --disable-dependency-tracking can speed up builds and - avoid some build errors. - Some make targets have alternate names. make check-install and - make installcheck do the same thing, for instance. - pmake on IRIX can be invoked from the root directory, but the - -V flag must be used to invoke it in any subdirectory or it - will give an error about undefined variables. - JML 2005/01 - 2005/03 - - Hardware conversion between long double and integers is also added. - SLU 2005/02/10 - - Started to support software conversion between long double and - integers. Hardware conversion will come very soon. SLU - 2005/1/6 - - Intel v8.0 compiler would infinite loop when compiling some test - code with -O3 option. Changed enable-production default compiler - option to -O2. AKC - 2004/12/06 - - Long double is assumed to be a supported C data type. It is a - stanadard C89 type. AKC - 2004/10/22 - - The IA64 will use ecc as the C++ compiler by default. - - Added some initial support for making valgrind/Purify (or similar - memory checking products) happier by initializing buffers to zero - and disabling the internal free list code. To take advantage of - this, use the "--enable-using-memchecker" configure option when - building the library. QAK - 2004/07/23 - - Fixed the long compile time of H5detect.c when v7.x Intel Compiler - is used with optimization NOT off. AKC - 2004/05/20 - - Fixed configure setting of C++ for OSF1 platform. AKC - 2004/01/06 - - Prefix default is changed from /usr/local to `pwd`/hdf5. - AKC - 2003/07/09 + ------------- Library: -------- - - Removed size restrictions on attributes, when using the "latest" - version of the file format. - QAK - 2007/02/21 - - Relaxed restrictions on attribute operations to allow a file ID to - be used as the "location ID". If a file ID is used, the attribute - operation will occur on the root group of the file. - - QAK - 2007/02/09 - - Enabled the CORE driver to read an existing file depending on - the setting of the backing_store for H5Pset_fapl_core and file - open flags. - SLU - 2006/11/30 - - Added new H5Gget_info_by_idx() routine to query the information about - a group according to the order within an index. - - QAK - 2006/11/27 - - Added new H5Gget_info() routine to query the information about a - group by name. - - QAK - 2006/11/27 - - Added new H5Oget_info_by_idx() routine to query the information about - an object in a group according to the order within an index. - - QAK - 2006/11/26 - - Added new H5Oget_info() routine to query the information about an - object in a group by name. - - QAK - 2006/11/26 - - Added new H5Oopen_by_idx() routine to open an object in a group - according to the order within an index. - - QAK - 2006/11/20 - - Added new H5Literate() routine to iterate over links in a group - according to the order within an index. - - QAK - 2006/11/20 - - Added new H5Ldelete_by_idx() routine to delete a link according to - the order within an index. - - QAK - 2006/11/13 - - Added new H5Lget_val_by_idx() routine to query the value of a soft link - according to the order within an index. - - QAK - 2006/11/13 - - Added new H5Lget_name_by_idx() routine to query the name of a link - according to the order within an index. - - QAK - 2006/11/12 - - Added new H5Rget_name() routine to determine the name of the object - that a reference points to, as long as the object is still - reachable in the group hierarchy. - - QAK - 2006/11/10 - - Added new H5Lget_info_by_idx() routine to query the link information - according to the order within an index. - - QAK - 2006/11/10 - - Added feature to H5Iget_name to allow retrieving the name of any - object's ID, as long as the object is still reachable in the - group hierarchy. - - LA - 2006/11/01 - - Added External and User-defined links. - External links are links from one HDF5 file to another; they - require both the name of the file and a path within that file. - User-defined links allow users to supply callback functions - for link traversals, allowing links to exhibit essentially - any behavior. - External links are a kind of user-defined link, so their default - behavior can be overridden by the user. - -JML 2006/8/23 - - Added H5Oopen and H5Oclose for opening objects of unknown type - (as link callback functions do). - -JML 2006/8/23 - - Added H5Oopen_by_addr, H5Oincr_refcount, and H5Odecr_refcount for - opening objects by address. Be very careful with these! - -JML 2006/8/23 - - Added H5Fget_intent to get the "intent" of a file (whether it - was opened with read-write access or read-only. - -JML 2006/8/23 - - Added Link Access Property Lists. They currently contain two - properties, nlinks (H5Pget/set_nlinks) and elink_prefix - (H5Pget/set_elink_prefix). nlinks controls how many soft and - user-defined traversals are allowed before HDF5 assumes it has - found a cycle (previously this defaulted to 16). - The elink_prefix is a filesystem path that is prefixed to the - names of any external link files opened using this LAPL. - -JML 2006/8/23 - - Add H5L link APIs. Old APIs (H5Glink, H5Gmove, etc.) are still - supported but deprecated. - New APIs are: - H5Llink - create a link to an object given its ID - H5Lmove - just like H5Gmove2 - H5Lcopy - copy a link without copying the underlying object - H5Lcreate_hard - like H5Glink2 for hard links - H5Lcreate_soft - like H5Glink2 for soft links - H5Ldelete - just like H5Gunlink - H5Lget_val - just like H5Gget_linkval - H5Lget_info - gets link-specific info (like H5Gget_objinfo) - - In addition, H5Gcreate_anon, H5Tcommit_anon, and H5Dcreate_anon - no longer create links to objects; objects must be manually linked - using H5Llink or they will be deleted when the ID is closed. - - Link Creation Property Lists can be used to pass character - encoding (ASCII or UTF-8) for link names and to set the Intermediate - Group Creation Flag: - H5Pset_char_encoding, H5Pget_char_encoding - H5Pset_copy_object, H5Pget_copy_object - -JML 2006/7/5 - - Added managements of collective IO supports for chunking storage - inside parallel HDF5 - 1) Implemented One IO with collective mode for all chunks in the - application by building one MPI derived datatype accross all - chunks. - 2) Implemented the decision-making support to do collective IO inside - MPI-IO per chunk. - 3) Added the decision-making support to do one IO accross all chunks - or to do multiple IOs with each IO per chunk. - 4) Added the support to handle the case some processes won't do any IOs in - collectively. - 5) Some MPI-IO package(mpich 1.2.6 or lower, e.g.) cannot handle - collective IO correctly for the case when some processes have no - contributions to IOs, a special macro is added to change - collective IO mode to independent IO mode inside HDF5 library. - - Currently we find that MPICH at Linux and vender MPI-IO package at NCSA - Altix cannot handle this case. - - "hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'}" - has been added at the end of file <ia64-linux-gnui> and - <linux-gnulibc1>. - - If MPI-IO packages at your Linux and Altix support this case, - please comment out the last line and report to us at - help@hdfgroup.org. We can tune in our configuration to - support this. - - KY - 2006/02/16 - - Added character encoding to attribute creation property lists. - JML - 2006/01/02 - - Added H5Gcopy() routine to copy objects between while keeping - data in compressed form. QAK - 2005/11/06 - - Added H5Sextent_equal() routine. QAK - 2005/11/06 - - Added HSYS_ERROR which retrieves the system error message and pushes - it to the error stack. This gives more information of the failed - system call. AKC - 2005/08/04 - - Added H5F_OBJ_LOCAL flag to H5Fget_obj_count() & H5Fget_obj_ids(), to - allow querying for objects in file that were opened with a particular - file ID, instead of all objects opened in file with any file ID. - QAK - 2005/06/01 - - Added H5T_CSET_UTF8 character set to mark datatypes that use the - UTF-8 Unicode character encoding. Added tests to ensure that - library handles UTF-8 object names, attributes, etc. -JL 2005/05/13 - - HDF5 supports collective MPI-IO for irregular selection with HDF5 - dataset. Irregular selection is when users use H5Sselect_hyperslab - more than once for the same dataset. - Currently, not all MPI-IO packages support complicated MPI derived - datatype used in the implementation of irregular - selection INSIDE HDF5. - 1) DEC 5.x is not supporting complicated derived datatype. - 2) For AIX 5.1, - if your poe version number is 3.2.0.19 or lower, - please edit powerpc-ibm-aix5.x under hdf5/config, - Find the line with - << hdf5_mpi_complex_derived_datatype_works>> - and UNCOMMENT this line before the configure. - check poe version with the following command: - lpp -l all | grep ppe.poe - 3) For Linux cluster, - if mpich version is 1.2.5 or lower, collective irregular selection - IO is not supported, internally independent IO is used. - 4) For IRIX 6.5, - if C compiler version is 7.3 or lower, collective irregular selection - IO is not supported, internally independent IO is used. - 5) For platforms which internally used mpich, if the - mpich version is 1.2.5 or lower, please find the - corresponding config file and add - hdf5_mpi_complex_derived_datatype_works='no' at the - end of the configuration file. For example, at NCSA - SGI Altix, the internal mpich library is 1.2.5. So - hdf5_mpi_complex_derived_datatype_works='no' should be - added at the end of the config file ia64-linux-gnu. - KY - 2005/09/12 - We also found not all MPI-IO packages support collective IO with one - or more processes to have no contributions to IO. - For mpich version 1.2.6 or lower and all IRIX machine, - if the library checks that there are no IO contributions for some - processes, collective IO request is replaced with - independent inside HDF5. - KY - 2006/05/04 - - - HDF5 N-bit filter - HDF5 support N-bit filter from this version, - The N-Bit filter is used effectively for compressing data of N-Bit - datatype as well as compound and array datatype with N-Bit fields. - KY - 2005/04/15 - - HDF5 scaleoffset filter - HDF5 supports scaleoffset filter for users to do data - compression through HDF5 library. - Scale-Offset compression performs a scale and/or offset operation - on each data value and truncates the resulting value to a minimum - number of bits and then stores the data. - Scaleoffset filter supports floating-point and integer datatype. - Please check the HDF5 reference manual for this. - KY - 2005/06/06 - - Retired SRB vfd (--with-srb). Functions H5Pset_fapl_srb and - H5Pget_fapl_srb were removed. EIP - 2005/04/07 - - Retired GASS vfd (--with-gass). Functions H5Pset_fapl_gass and - H5Pget_fapl_gass are removed too. AKC - 2005/3/3 - - Pablo was removed from the source code EIP - 2005/01/21 - - Modified registration of SZIP to dynamically detect the presence - or absence of the encoder. Changed configure and Makefiles, - and tests to dynamically detect encoder. BEM - 2004/11/02 - - Added function H5Pget_data_transform, together with the previously - added H5Pset_data_transform, to support the data transform - feature. AKC - 2004/10/26 - - Compound datatype has been enhanced with a new feature of size - adjustment. The size can be increased and decreased(without - cutting the last member) as long as it doesn't go down to zero. - No API change is involved. SLU - 2004/10/1 - - Put back 6 old error API functions to be backward compatible with - version 1.6. They are H5Epush, H5Eprint, H5Ewalk, H5Eclear, - H5Eset_auto, H5Eget_auto. Their new equivalent functions are - called H5Epush_stack, H5Eprint_stack, H5Ewalk_stack, - H5Eclear_stack, H5Eset_auto_stack, H5Eget_auto_stack. SLU - - 2004/9/2 - - 4 new API functions, H5Tencode, H5Tdecode, H5Sencode, H5Sdecode were - added to the library. Given object ID, these functions encode and - decode HDF5 objects(data type and space) information into and from - binary buffer. SLU - 2004/07/21 - - Modified the way how HDF5 calculates 'pixels_per_scanline' parameter for - SZIP compression. Now there is no restriction on the size and shape of the - chunk except that the total number of elements in the chunk cannot be - bigger than 'pixels_per_block' parameter provided by the user. - EIP - 2004/07/21 - - Added support for SZIP without encoder. Added H5Zget_filter_info - and changed H5Pget_filter and H5Pget_filter_by_id to support this - change. JL/NF - 2004/06/30 - - SZIP always uses K13 compression. This flag no longer needs to - be set when calling H5Pset_szip. If the flag for CHIP - compression is set, it will be ignored (since the two are mutually - exclusive). JL/NF - 2004/6/30 - - A new API function H5Fget_name was added. It returns the name - of the file by object(file, group, data set, named data type, - attribute) ID. SLU - 2004/06/29 - - Added support for user defined identifier types. NF/JL - 2004/06/29 - - A new API function H5Fget_filesize was added. It returns the - actual file size of the opened file. SLU - 2004/06/24 - - New Feature of Data transformation is added. AKC - 2004/05/03. - - New exception handler for datatype conversion is put in to - replace the old overflow callback function. This exception - handler is set through H5Pset_type_conv_cb function. - SLU - 2004/4/27 - - Added option that if $HDF5_DISABLE_VERSION_CHECK is set to 2, - will suppress all library version mismatch warning messages. - AKC - 2004/4/14 - - A new type of dataspace, null dataspace(dataspace without any - element) was added. SLU - 2004/3/24 - - Data type conversion(software) from integer to float was added. - SLU - 2004/3/13 - - Data type conversion(software) from float to integer was added. - Conversion from integer to float will be added later. - SLU -2004/2/4 - - Added new H5Premove_filter routine to remove I/O pipeline filters - from dataset creation property lists. PVN - 2004/01/26 - - Added new 'compare' callback parameter to H5Pregister & H5Pinsert - routines. QAK - 2004/01/07 - - Data type conversion(hardware) between integers and floats was added. - SLU 2003/11/21 - - New function H5Iget_file_id() was added. It returns file ID given - an object(dataset, group, or attribute) ID. SLU 2003/10/29 - - Added new fields to the H5G_stat_t for more information about an - object's object header. QAK 2003/10/06 - - Added new H5Fget_freespace() routine to query the free space in a - given file. QAK 2003/10/06 - - Added backward compatability with v1.6 for new Error API. SLU - - 2003/09/24 - - Changed 'objno' field in H5G_stat_t structure from 'unsigned long[2]' - to 'haddr_t'. QAK - 2003/08/08 - - Changed 'fileno' field in H5G_stat_t structure from 'unsigned long[2]' - to 'unsigned long'. QAK - 2003/08/08 - - Changed 'hobj_ref_t' type from structure with array field to 'haddr_t'. - QAK - 2003/08/08 - - Object references (hobj_ref_t) can now be compared with the 'objno' - field in the H5G_stat_t struct for testing if two objects are the - same within a file. QAK - 2003/08/08 - - Switched over to new error API. SLU - 2003/07/25 Parallel Library: ----------------- - - Added mpich2 as a testing "platform" informally. AKC - 2005/9/28. - - A dataset created in serial mode with H5D_ALLOC_TIME_INCR allocation - setting was not extendible, either explicitly by H5Dextend or - implicitly by writing to unallocated chunks. Library now allocates - more space when needed or directed if the file is opened by parallel - mode, independent of what the dataset allocation mode is. - CC/AKC - 2005/08/29. - - Allow compressed, chunked datasets to be read in parallel. - QAK - 2004/10/04 - - Add options of using atomicity and file-sync to test_mpio_1wMr. - AKC - 2003/11/13 - - Added parallel test, test_mpio_1wMr, which tests if the - underlaying parallel I/O system is conforming to the POSIX - write/read requirement. AKC - 2003/11/12 Fortran Library: ---------------- - - added support for shared Fortran libraries. -JML 2005/09/20 - - added missing h5tget_member_class_f function - EIP 2005/04/06 - - added new functions h5fget_name_f and h5fget_filesize_f - EIP 2004/07/08 - - h5dwrite/read_f and h5awrite/read_f functions only accept dims parameter - of the type INTEGER(HSIZE_T). - - added support for native integers of 8 bytes (i.e. when special - compiler flag is specified to set native fortran integers to 8 bytes, - for example, -i8 flag for PGI and Absoft Fortran compilers, - -qintsize=8 flag for IBM xlf compiler). - EIP 2005/06/20 - - added support for "big" REAL and DOUBLE PRECISION types - (usually the size is specified by compilers flags like - -r8, -r16, etc.) - Known problem: multi file test fails when REAL is 16 bytes. - EIP 2005/09/8 C++ Library: ---------------- - - added support for shared C++ libraries. -JML 2005/09/20 - - Added missing member functions - H5::CompType::getMemberArrayType - H5::CompType::getMemberVarLenType - H5::AbstractDs::getArrayType - H5::AbstractDs::getVarLenType - H5::CommonFG::openArrayType - H5::CommonFG::openVarLenType - H5::PropList::copyProp -- this will replace the current - H5::PropList::copyProp in later releases due - to incorrect prototype. - H5::IdComponent::getHDFObjType - BMR - 2005/08/08 Tools: ------ - - h5repack and h5diff changed command line parameter syntax to be - similar to h5dump, adding also long switch names. PVN - 2008/1/16 - - h5repack now supports adding multiple filters to all objects. - PVN - 2008/1/16 - - h5dump lists groups and attributes in requested orders (by name and - creation order, both ascending and descending). PVN - 2007/10/5 - - h5import imports string (text) data. PVN - 2007/10/5 - - h52gif and gif2h5: Both these tools were revised to include the High - Level Image API support, and tests were added to /hl/tools/gif2h5. - PVN - 2007/04/13 - - h5dump: added support for double long type H5T_NATIVE_LDOUBLE. PVN - 2007/03/13 - - h5dump: added support for binary output, see usage. PVN 2007/03/13 - - h5repack: added support for the new nbit and scaleoffset filters. - PVN - 2007/05/07 - - h5repack: now uses the API function H5Ocopy (of the tool h5copy) to - recreate objects if there is not a user input for changes. PVN - - 2007/05/07 - - h5repack: added support for reading and repacking by hyperslabs for - large files. PVN - 2007/03/01 - - h5repack: a new option allows the copy using the file type (default) - instead of the previous conversion to native type. PVN - 2007/03/01 - - h5repack: output the percentage of compression used. PVN - 2007/03/01 - - h5diff: added support for -p option for unsigned long_long data. PVN - - 2007/02/26 - - h5diff: added support for comparing dataset regions. PVN - 2007/02/20 - - h5diff: added support for reading and comparing by hyperslabs for large files. - PVN - 2007/02/20 - - h5diff: printing of dataset dimensions along with dataset name. PVN -2007/02/19 - - h5dump now uses the new API function H5Rget_name to display the name - of the dataset referenced instead of its ID. PVN - 2007/02/19 - - Added new tool, h5mkgrp. QAK - 2007/02/14 - - Added new tool, h5copy. PVN - 2006/7/15 - - Removed obsolete pdb2hdf5 tool from tools/misc -JML 2005/10/24 - - Added build_h5perf_alone.sh that builds h5perf by standalone mode. - AKC - 2005/09/18. - - Sped up h5dump on files with large numbers of objects. - QAK - 2005/08/25 - - Added a standalone mode for building h5perf. AKC - 2005/08/12 - - new tool, h5jam. See reference manual. 2004/10/08 - - h5repack.sh did not report errors encountered during tests. It does - now. AKC - 2004/04/02 - - Added the MPI-I/O and MPI-POSIX drivers to the list of VFL drivers - available for h5dump and h5ls. RPM & QAK - 2004/02/01 - - Added option --vfd= to h5ls to allow a VFL driver to be selected - by a user. RPM & QAK - 2004/02/01 - - Added option -showconfig to compiler tools (h5cc,h5fc,h5c++). - AKC - 2004/01/08 - - Install the "h5cc" and "h5fc" tools as "h5pcc" and "h5pfc" - respectively if library is built in parallel mode. - WCW - 2003/11/04 - - Added metadata benchmark (perform/perf_meta). SLU - 2003/10/03 - - Changed output of "OID"s from h5dump from "<number>-<number>" to - "<number". This affects both the "regular" and XML output. - QAK - 2003/08/08 - - Changed output of file IDs and "OID"s from h5ls from - "<number>:<number>:<number>:<number>" to "<number>:<number>" - QAK - 2003/08/08 High-Level APIs: ------ - - Fortran interfaces for the Image, Table and Lite APIs. PVN - 2007/5/1 - - New HDF5 Dimension Scale API (H5DS) allows dimension scales to be - created in an HDF5 file and associated with specific datasets. PVN - 2007/5/1 - - There are two new functions in the Lite library, H5LTtext_to_dtype - and H5LTdtype_to_text. H5LTtext_to_dtype creates a HDF5 data type - given a text description; H5LTdtype_to_text converts a data type - to text description. Only DDL definition is supported as text - desciption now. SLU - 2006/05/17 - - Added Packet Table API for creating tables with less overhead than - H5TB API. Added C++ wrapper for Packet Tables. See documentation. - JML - 2004/03/28 Documentation ------------- - - The documentation for this release is largely complete, but - trails the source code. A few of the newer functions are - not yet documented. FMB - 2007/04/18 - - The user documents for this release can be accessed directly at - this location: - http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/doc/ - The most recent document versions (updated daily) in the - 1.8 development branch can be accessed at this location: - http://www.hdfgroup.uiuc.edu/HDF5/doc_dev_snapshot/H5_dev/ - FMB - 2007/04/18 - Support for new platforms, languages and compilers. ======================================= - - Added support for Free-BSD on amd64 with GNU C and Fortran compilers - 4.2.1 - EIP - 2007/06/25 - - Added support for sequential and parallel libraries for Intel 64 Linux - cluster (abe.ncsa.uiuc.edu). Among three MPICH packages available on - this machine, only Open MPI works. The VMI has seg fault in hyperslab.c - and bittests.c tests. The MVAPICH2 complained about mpd not running - the parallel test. (see Known Problems section for more info) - EIP - 2007/06/25 - - Added support for HPUX11.23 for both 32 and 64-bit; HDF5 C++ - - Added support for 64-bit Windows with Visual Studio .NET and 2005. - SJW - 2007/06/25 - - Added suport for HPUX11.23 for both 32 and 64-bit; HDF5 C++ - shared library is not supported with +DD64 flag. - EIP - 2006/06/22 - - Added support for VAX floating numbers for Alpha Open VMS 7.3.2 - EIP - 2006/05/05 - - Fixed broken make.com files in tools directories - EIP - 2006/05/05 - - Added support for Alpha Open VMS 7.3.2 EIP - 2006/04/15 - - Added support for Cray X1. JML - 2005/10/03 - - PGI Fortran compiler is supported on Linux64 systems (x86_64) - EIP - 2004/08/19 - - Absoft compiler f95 v9.0 supported on Linux 2.4 - EIP - 2004/07/29 - - HDF5 Fortran APIs are supported on Mac OSX with IBM XL Fortran - compiler version 8.1. This is a default compiler. - - HDF5 Fortran APIs are supported on MAC OSX with Absoft F95 compiler - version 8.2; set F9X environment varibale to f95, for example - setenv F9X f95 - Use --disable-shared --enable-static configure flags when Absoft - compiler is used. - EIP - 2004/07/27 - - HDF5 Fortran APIs are supported on MAC OSX with IBM XL Fortran - Compiler version 8.1 Use "--disable-shared --enable-static" - configure flags along with the "--enable-fortran" flag to build - Fortran library. EIP - 2004/01/07 - -Bug Fixes since HDF5-1.6.0 release + +Bug Fixes since HDF5-1.8.0 release ================================== Library ------- - - Changed library's behavior for reading files that might have - corrupted object header information from a previous (buggy) - version of the library. By default, the library now rebuilds the - correct object header information instead of issuing an error. - Previous "strict" file format interpretation can be enabled with - the "--enable-strict-format-checks" configure option. - QAK - 2008/01/13 - - Fixed several bugs with writing fill values for datasets that have - a variable-length datatype or component datatype. QAK - 2007/06/19 - - STDIO driver didn't support files bigger than 2GB because the OFFSET - parameter of fseek is of type LONG INT, not big enough for big files. - Use fseeko instead for big files if it's available on the system. - SLU - 2007/4/5 - - Fixed a bug in H5Sselect_valid() that caused an incorrect value to - be returned (0) instead of FAIL on error conditions such as the - selection or extent not being defined. CMC - 2007/01/17 - - Fixed the MULTI driver problem (Bug #731) that corruptted the data. - SLU - 2007/1/12 - - Fixed file corruption bug which could write an incorrect number of - messages to an object's header under certain circumstances. - Generally, the sequence of actions to generate this bug looks - like this: - - Create an object - - Close the file - - Re-open the file - - Add 2 (or more) attributes to the object - - Close the file - - Re-open the file - - Delete one of the attributes on the object - - Add a smaller attribute to the object - - Delete the smaller atttribute on the object - - Add a larger attribute on the object - - After this, the number of header messages stored for the object - will be off by one. Other sequences of modifying attributes on an - object could also trigger this bug. If you are opening an - object and the bottom few messages of the HDF5 error stack - resembles this, the object has been affected by this bug: - - #007: ../../hdf5_v1.6/src/H5C.c line 3887 in H5C_load_entry(): unable to load entry - major(08): Meta data cache layer - minor(40): Unable to load metadata into cache - #008: ../../hdf5_v1.6/src/H5Ocache.c line 332 in H5O_load(): corrupt object header - too few messages - major(12): Object header layer - minor(40): Unable to load metadata into cache - - Specifically, "corrupt object header" is the best string to search - for in the HDF5 error stack output. - - If your files have been affected by this bug, or you are concerned - that your files might have been, please contact the HDF Helpdesk - at help@hdfgroup.org for a tool to detect and repair files - affected by this problem. QAK - 2006/6/16 - - Fixed various problems with retrieving names of objects, especially - with mounted files. QAK - 2005/12/25 - - Fixed core dump when closing root groups opened through two different - file handles that operate on the same actual file. QAK - 2005/10/02 - - Corrected errors when performing various operations on a group opened - by dereferencing an object reference. QAK - 2005/07/30 - - Fixed a bug with named datatypes where a copy of a named datatype - used to create a dataset would accidentally use the original - named datatype for the dataset's datatype. QAK - 2005/07/23 - - Made H5Fget_name() be consistent and always return name of actual - file the ID is in. (Instead of the name of the top file in a - file mounting hierarchy). QAK - 2005/07/19 - - Reworked internal file mounting semantics to hopefully eliminate - mounting problems. We now require that files that are mounting - together all have the same "file close degree". QAK - 2005/07/19 - - More bug fixes on holding open files that are mounted and have - IDs open. QAK - 2005/07/14 - - Don't unmount child files until the parent file actually closes. - (Previously, if an object is holding open a file, the child files - would get unmounted too early). QAK - 2005/07/05 - - Fixed bug where unmounted files could cause the library to go into - an infinite loop when shutting down. QAK - 2005/06/30 - - The library didn't save the information of family driver in file. - The original file member size was lost after file was closed (see - bug #213). This has been fixed by saving driver name and member - file size in the superblock. SLU - 2005/6/24 - - Fixed bug with hyperslab selections that use selection offsets and - operate on chunked datasets going into infinite loop or dumping - core. QAK - 2005/06/17 - - Corrected memory leak and possible corruption when opening a group. - QAK - 2005/06/17 - - Added check for opaque datatype tags being too long (check against - H5T_OPAQUE_TAG_MAX, currently set to 256). QAK - 2005/06/14 - - Fixed various errors in maintaining names for open objects in the - face of unusual mount & unmount operations. QAK - 2005/06/08 - - "SEMI" and "STRONG" file close degree settings now apply only to the - particular file ID being closed, instead of operating on all open - file IDs for a given file. QAK - 2005/06/01 - - For family driver, the library didn't save member size in file. - When file is reopened, the size of 1st member file determine the - member size. Now member size is saved in file and is used to - define member file size. Wrong file access property of member size - will result in a failure. Using any other driver except family - will cause library to return error. So is multi driver. SLU - - 2005/05/24 - - Fixed error in opening object in group that was opened in mounted - file which has been unmounted. QAK - 2005/03/17 - - Fixed a racing condition in MPIPOSIX virtual file drive close - function. Now all processes must completed the close before any - of them is returned. This prevents some "faster" processes start - accessing the file for another purpose (e.g., open with truncate) - while other "slower" processes have not closed the same file with - the previous purpose. AKC - 2005/03/01 - - H5Tget_member_value calls for enum datatype didn't return correct - value if H5Tenum_valueof was called first. It's fixed. SLU - - 2005/02/08 - - For variable-length string, H5Tget_class returned H5T_STRING as its - class. But H5Tdetect_class and H5Tget_member_class considered it - as H5T_VLEN. This is fixed to let all these 3 functions treat it - as H5T_STRING. SLU - 2005/02/08 - - The byte order of 1-byte integer types was fixed as little endian - even on a big-endian machine. This has been corrected. SLU - - 2005/02/07 - - Fix segmentation fault when calling H5Fflush with an attribute that - hasn't had a value written to it open. QAK - 2004/10/18 - - Back up supporting bitfield and time types in H5Tget_native_type. - Leave it to future support. The function simply returns error - message of "not support" for bitfield and time types. - SLU - 2004/10/5 - - Fixed address check in Core VFL driver to avoid spurious address/size - overflows for odd valued addresses and/or sizes. QAK - 2004/09/27 - - Fixed parallel bug in which some processes attempted collective - I/O while others did independent I/O. Bug appeared when some - processes used point selections, and others didn't. JRM - 2004/9/15 - - Corrected error where dataset region references were written in an - incorrect way on Cray machines. PVN & QAK - 2004/09/13 - - The H5Tget_native_type now determines the native type for integers - based on the precision. This is to avoid cases of wrongly converting - an int to a short in machines that have a short of 8 bytes but with - 32bit precision (e.g Cray SV1). PVN - 2004/09/07 - - Changed H5Dread() to not overwrite data in an application's buffer - with garbage when accessing a chunked dataset with an undefined - fill value and an unwritten chunk is uncountered. QAK - 2004/08/25 - - Fixed error which could cause a core dump when a type conversion - routine was registered after a compound datatype had been - converted and then an equivalment compound datatype was converted - again. QAK - 2004/08/07 - - Fixed memory overwrite when encoding "multi" file driver information - for file's superblock. QAK - 2004/08/05 - - Fixed obscure bug where a filter which failed during chunk allocation - could allow library to write uncompressed data to disk but think - the data was compressed. QAK - 2004/07/29 - - Fixed bug where I/O to an extendible chunked dataset with zero-sized - dimensions would cause library to fail an assertion. - QAK - 2004/07/27 - - Fixed bug where chunked datasets which have filters defined, - allocation time set to "late" and whose chunks don't align with - the dataspace bounds could have incorrect data stored when - overwriting the entire dataset on the first write. QAK - 2004/07/27 - - Added check to ensure that dataspaces have extents set. JML-2004/07/26 - - Fixed bug on some Solaris systems where HDF5 would try to use - gettimeofday() when that function didn't work properly. - JML - 2004/07/23 - - Fixed bug in H5Sset_extent_simple where setting maximum size to - non-zero, then to zero would cause an error. JML - 2004/07/20 - - Allow NULL pointer for buffer parameter to H5Dread & H5Dwrite - when not writing data ("none" selection or hyperslab or point - selection with no elements defined). QAK - 2004/07/20 - - Calling H5Gcreate() on "/" or "." throws an error instead of - failing quietly. JML - 2004/07/19 - - Fixed bug where setting file address size to be very small could - trigger an assert if the file grew to more than 64 KB. Now throws - an error and data can be recovered. JL/NF - 2004/07/14 - - Fixed bug where "resurrecting" a dataset was failing. - QAK - 2004/07/14 - - Fixed bug where incorrect data could be read from a chunked dataset - after it was extended. QAK - 2004/07/12 - - Fixed failure to read data back from file of compound type with - variable-length string as field. SLU - 2004/06/10 - - Fixed potential file corruption bug when a block of metadata could - overlap the end of the internal metadata accumulator buffer and - the buffer would be extended correctly, but would incorrectly - change it's starting address. QAK - 2004/06/09 - - Opaque datatype with no tag failed for some operations. Fixed. - SLU - 2004/6/3 - - Fixed potential file corruption bug where dimensions that were - too large (a value greater than could be represented in 32-bits) - could cause the incorrect amount of space to be allocated in a - file for the raw data for the dataset. QAK - 2004/06/01 - - Fixed dtypes "sw long double -> double" failure in QSC class - machines. AKC - 2004/4/16 - - Fixed problem with fletcher32 filter when converting data of different - endianess. PVN - 2004/03/10 - - Fixed problem with H5Tget_native_type() not handling opaque fields - correctly. QAK - 2004/01/31 - - Fixed several errors in B-tree deletion code which could cause a - B-tree (used with groups and chunked datasets) to become corrupt - with the right sequence of deleted objects. QAK - 2004/01/19 - - Fixed small internal memory leaks of fill-value information. - QAK - 2004/01/13 - - Fixed bug that caused variable-length datatypes (strings or sequences) - used for datasets in files with objects that were unlinked to - fail to be read/written to a file. QAK - 2004/01/13 - - Detect situation where szip 'pixels per block' is larger than the - fastest changing dimension of a dataset's chunk size and disallow - this (due to limits in szip library). QAK - 2003/12/31 - - Fixed bug with flattened hyperslab selections that would generate - incorrect hyperslab information with certain high-dimensionality - combinations of start/stride/count/block information. - QAK - 2003/12/31 - - Fixed bug with variable-length datatypes used in compound datatypes. - SLU - 2003/12/29 - - Fixed bug in parallel I/O routines that would cause reads from - "short datasets" (datasets which were only partially written out) - to return invalid data. QAK & AKC - 2003/12/19 - - Fixed bug where scalar dataspaces for attributes were reporting as - simple dataspaces. QAK - 2003/12/13 - - Fixed problem with selection offsets of hyperslab selections in - chunked datasets causing the library to go into an infinite loop. - QAK - 2003/12/13 - - Fixed H5Giterate to avoid re-using index parameter after iteration - callback has been called (allows iteration callback to modify the - index parameter itself). QAK - 2003/12/06 - - Fixed various floating-point conversion problems, including a - change which could corrupt data when converting from double->float. - QAK - 2003/11/24 - - Changed "single process" metadata writing in library to collective - I/O by all processes, in order to guarantee correct data being - written with MPI-I/O. QAK - 2003/11/20 - - Fixed problems with fill values and variable-length types and also - I/O on VL values that were set to NULL. QAK - 2003/11/08 - - Fixed problems with MPI datatypes that caused ASCI Q machine to - hang. QAK - 2003/10/28 - - Removed HDF5_MPI_PREFER_DERIVED_TYPES environment variable support, - since it had no benefit. QAK - 2003/10/28 - - Single hyperslab selections (which were set with only one call to - H5Sselect_hyperslab) that had dimensions that could be "flattened" - but were interspersed with dimensions that could not be flattened - were not correctly handled, causing core dumps. QAK - 2003/10/25 - - Fixed incorrect datatype of the third parameter to the Fortran90 - h5pset(get)_cache_f subroutine (INTEGER to INTEGER(SIZE_T)) - EIP - 2003/10/13 - - Fixed problems with accessing variable-length data datatypes on - Crays. QAK - 2003/10/10 - - Fixed potential file corruption bug when too many object header - messages (probably attributes, from a user perspective) were - inserted into an object header and certain other conditions were - met. QAK - 2003/10/08 - - Changed implementation of internal ID searching algorithm to avoid - O(n) behavior for many common cases. QAK - 2003/10/06 - - Allow partial parallel writing to compact datasets. QAK - 2003/10/06 - - Correctly create reference to shared datatype in attribute, instead - of making a copy of the shared datatype in the attribute. - QAK - 2003/10/01 - - Revert changes which caused files >2GB to fail when created with - MPI-I/O file driver on certain platforms. QAK - 2003/09/16 - - Allow compound datatypes to grow in size. SLU - 2003/09/10 - - Detect if a type is already packed before attempting to pack it - again or check if it is locked. SLU - 2003/09/10 - - Corrected bug when opening a file twice with read-only permission - for one open and then closing the read-only access file ID would - generate an error. QAK - 2003/09/10 - - Corrected bug in repeated calls to H5Pget_access_plist() which would - incorrectly manage reference counts of internal information and - eventually blow up. QAK - 2003/09/02 - - Return rank of the array datatype on successful call to - H5Tget_array_dims(). QAK - 2003/08/30 - - Corrected bug in H5Tdetect_class which was not correctly detecting - datatype classes of fields in nested compound datatypes in some - circumstances. QAK - 2003/08/30 - - Corrected bug in sieve buffer code which could cause loss of data - when a small dataset was created and deleted in quick succession. - QAK - 2003/08/27 - - Corrected bug in H5Gget_objname_by_idx which was not allowing NULL - for the name when just querying for the object name's length. - QAK - 2003/08/25 - - Corrected bug in variable-length string handling which could - generate a core dump on writing variable-length strings as part - of a compound datatype on certain architectures. QAK - 2003/08/25 - - Corrected bug in H5Tget_native_type which would incorrectly compute - the size of certain compound datatypes and also incorrectly - compute the offset of the last field for those compound datatypes. - QAK - 2003/08/25 - - Corrected bug in H5Tget_native_type which would drop string datatype - metadata (padding, etc.) QAK - 2003/08/25 - - Corrected bugs in H5Gget_num_objs, H5Gget_objname_by_idx and - H5Gget_objtype_by_idx to allow them to accept location IDs, not just - group IDs. QAK - 2003/08/21 - - Corrected bug when using scalar dataspace for memory selection and - operating on chunked dataset. QAK - 2003/08/18 - - Corrected bugs with multiple '/' characters in names for H5Glink - and H5Gunlink. QAK - 2003/08/16 - - Corrected bug with user blocks that didn't allow a user block to - be inserted in front of a file after the file was created. - QAK - 2003/08/13 - - Corrected errors with using point selections to access data in - chunked datasets. QAK - 2003/07/23 - - Corrected error with variable-length datatypes and chunked datasets - caused H5Dwrite to fail sometimes. QAK - 2003/07/19 - - Modified library and file format to support storing indexed storage - (chunked dataset) B-tree's with non-default internal 'K' values. - QAK - 2003/07/15 - - Returned H5T_BKG_TEMP support to library after it was accidentally - removed. QAK - 2003/07/14 + - Fixed the problem with the searching of target file for H5Lcreate_external(). + The searching pattern will depend on whether the target file's + pathname is an absolute or a relative path. Please see the description + in the RM for H5Lcreate_external(). (VC - 4/8/08) + - Fixed possible file corruption bug when encoding datatype + descriptions for compound datatypes whose size was between + 256 & 511 bytes and the file was opened with the "use the + latest format" property enabled (with H5Pset_libver_bounds). + (QAK - 2008/03/13) + - Fixed bug in H5Aget_num_attrs() routine to handle invalid location + ID correctly. (QAK - 2008/03/11) + Configuration ------------- - - Configure can now use any tr command. No more need for - defining variable TR nor is it supported. -AKC 2006/05/19 - - Parallel I/O with the MPI-I/O driver will no longer work if the - filesystem is not POSIX compliant. The "HDF5_MPI_1_METAWRITE" - environment variable has been removed. QAK - 2004/01/30 - - Fixed the error that cause "make install" to fail because of the - macro definition syntax of "prefix?=..." AKC - 2003/07/22 Performance ------------- - - Optimized I/O for enumerated datatypes that are a superset of source - enumerated datatype. QAK - 2005/03/19 - - More optimizations to inner loops of datatype conversions for - integers and floats which give a 10-50% speedup. QAK - 2003/11/07 - - Hoisted invariant 'if/else's out of inner datatype conversion loop for - integer and floating-point values, giving about a 20% speedup. - QAK - 2003/10/20 Tools ----- - - Fixed h5dump regarding the display of blocks in hyperslab - selections. PVN 2008/01/16 - - Fixed h5diff regarding the display of NaN (Not a Number) - values. PVN 2008/01/16 - - Fixed h5dump regarding the parsing of binary output parameters. - PVN 2008/01/16 - - Fixed memory problems in h52gif and gif2h5. PVN 2008/01/16 - - Fixed h5repack dealing with NULL references. PVN 2008/01/16 - - Fixed h5dump & h5ls to display attributes in "name" order, rather - than the order they are encountered in the object header. - QAK - 2007/10/04 - - Fixed h5dump regarding the display of named datatypes - attributes. PVN 2007/03/13 - - Fixed h5dump regarding the display of group comments. PVN - 2007/03/13 - - Fixed h5dump regarding the display of hardlinks pointing - to the root group. PVN 2007/03/13 - - Fixed h5diff percentage option -p. PVN 2007/03/05 - - Fixed h5dump that caused array indices greater than 2 ^32-1 - not to be printed correctly - PVN 2007/2/19 - - Fixed h5dump to print attributes data in ASCII if -r option is used. - AKC - 2004/11/18 - - Fixed space utilization reported in h5ls to correct error in formula - used. QAK - 2004/10/22 - - Fixed h5redeploy which sometimes complain too many argument for the - test command. (The complain did not hinder the h5redploy to - proceed correctly.) AKC - 2003/11/03 - - Fixed a segmentation fault of h5diff when percentage option is used. - AKC - 2003/08/27 - - Switched away from tools using internal "fixtype" function(s) to use - H5Tget_native_type() internally. QAK - 2003/08/25 + - Fixed bug in h5diff that prevented datasets & attributes with + variable-length string elements from comparing correctly. + (QAK - 2008/02/28) + - h5import bug on Windows w/binary datasets. fread in windows needs a + binary file to be open with 'rb' instead of 'r' otherwise it + terminates execution if an end of file character is found on the + input file. Besides that the binary file generated needs to be open + with 'wb' , otherwise an end of line character is read twice. + (PVN - 2008/02/19) + - Fixed bug in h5dump that caused binary output to be made only for the first + dataset, when several datasets were requested. (PVN - 2008/04/07) + Documentation @@ -992,27 +111,23 @@ Bug Fixes since HDF5-1.6.0 release F90 APIs -------- - - h5pget_driver_f was returning information that could not be - interpreted by fortran application program; fixed. EIP - 2005/04/10 + + + C++ APIs + -------- + - Fixed bug that caused segfaults in Attribute::read. (BMR - 2008/04/20) + - Fixed bug in PropList::getClassName to use portable HDfree instead + of free. (BMR - 2008/04/20) Platforms Tested ================ -Platforms marked with * were not tested for hdf5-1.8.0-rc* release -(This information is somewhat out of date and may be inaccurate. It will be - updated for a later release) -* AIX 5.2 (32/64 bit) xlc 8.0.0.11 + AIX 5.2 (32/64 bit) xlc 8.0.0.11 xlC 8.0 xlf 10.01.0000.0 mpcc_r 6.0.0.8 mpxlf_r 8.1.1.7 -* AIX 5.3 (32/64 bit) xlc 7.0.0.8 - xlC 7.0.0.8 - xlf 09.01.0000.0007 -* Cray X1 water 3.0.35 Cray Standard C Version 5.4.0.7.4 - Cray Fortran 5.4.0.7.3 - Cray C++ 5.4.0.7.4 FreeBSD 6.2-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.1 20080123 @@ -1024,14 +139,11 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release g++ 4.2.1 20080123 gfortran 4.2.1 20080123 -* HP-UX B.11.23 HP aC++/ANSI C B3910B A.06.00 - HP F90 v2.9.2 - HP aC++/ANSI C B3910B A.06.00 IRIX64 6.5 (64 & n32) MIPSpro cc 7.4.4m F90 MIPSpro 7.4.4m C++ MIPSpro cc 7.4.4m -* Linux 2.6.9 (RHEL4) Intel 10.0 compilers + Linux 2.6.9 (RHEL4) Intel 10.0 compilers (abe.ncsa.uiuc.edu) Linux 2.4.21-47 gcc 3.2.3 20030502 (osage) @@ -1048,9 +160,6 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release SunOS 5.8 32,46 Sun WorkShop 6 update 2 C 5.3 (Solaris 2.8) Sun WorkShop 6 update 2 Fortran 95 6.2 Sun WorkShop 6 update 2 C++ 5.3 -* SunOS 5.10 i86pc Sun C 5.7 - Sun Fortran 95 8.1 - Sun C++ 5.7 SunOS 5.10 cc: Sun C 5.8 (linew) f90: Sun Fortran 95 8.2 CC: Sun C++ 5.8 @@ -1075,105 +184,91 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release MAC OS 10.4 (Intel) gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006) -* Alpha Open VMS 7.3 + Alpha Open VMS 7.3 Supported Configuration Features Summary -(This table was not modified for 1.8.0-rc* release; for information contact help@hdfgroup.org) ======================================== In the tables below y = tested and supported n = not supported or not tested in this release x = not working in this release - dna = does not apply ( ) = footnote appears below second table - <blank> = testing incomplete on this feature or platform - -Platform C F90 F90 C++ zlib SZIP - parallel parallel -SunOS5.8 64-bit n y n y y y -SunOS5.8 32-bit n y n y y y -SunOS5.10 64-bit y(1) y n y y y -SunOS5.10 32-bit y(1) y n y y y -IRIX64_6.5 64-bit n y y y y y -IRIX64_6.5 32-bit n n n n y y -Cray XT3 (16) n n n n n n -AIX-5.2 & 5.3 32-bit y y y y y y -AIX-5.2 & 5.3 64-bit y y y y y y -Windows XP n y(15) n(15) y y y -Windows XP x64 n y(15) n(15) y y y -Windows Vista n n n y y y -Mac OS X 10.4 PowerPC n n -FreeBSD 4.11 n n n y y y -RedHat EL3 W (3) y(1a) y(10) y(1a) y y y -RedHat EL3 W Intel (3) n y n y y n -RedHat EL3 W PGI (3) n y n y y n -SuSe x86_64 gcc (3,12) y(1a) y(11) n y y y -SuSe x86_64 Int (3,12) n y(13) n y y n -SuSe x86_64 PGI (3,12) n y(8) n y y y -Linux 2.4 Xeon C - Lustre Intel (3,6) n y n y y n -Linux 2.6 SuSE ia64 C - Intel (3,7) y y y y y n -Linux 2.6 SGI Altix - ia64 Intel (3) y y y y y y -Alpha OpenVMS 7.3.2 n y n y n n - - - -Platform Shared Shared Shared static- Thread- - C libs F90 libs C++ libs exec safe -Solaris2.8 64-bit y y y x y -Solaris2.8 32-bit y y y x y -Solaris2.10 64-bit y x y -Solaris2.10 32-bit y x y -IRIX64_6.5 64-bit y y n y y -IRIX64_6.5 32-bit y dna y y y -HPUX11.00 y n y x n -HPUX11.23-32bit y n n y n -HPUX11.23-64bit y dna n y n -Cray XT3 (16) n n n n n -AIX-5.2 & 5.3 32-bit n n n y n -AIX-5.2 & 5.3 64-bit n n n y n -Windows XP y y(15) y y y -Windows XP x64 y y(15) y y y -Windows Vista y n n y y -Mac OS X 10.3 y y n -Mac OS X 10.4 PowerPC -FreeBSD 4.11 y n y y y -RedHat EL3 W (3) y y(10) y y y -RedHat EL3 W Intel (3) y y y y n -RedHat EL3 W PGI (3) y y y y n -SuSe x86_64 W GNU (3,12) y y y y y -SuSe x86_64 W Int (3,12) y y y y(14) n -SuSe x86_64 W PGI (3,12) y y y y(14) n -Linux 2.4 Xeon C - Lustre Intel (6) y y y y n -Linux 2.4 SuSE - ia64 C Intel (7) y y y y n -Linux 2.4 SGI Altix - ia64 Intel y y n -Alpha OpenVMS 7.3.2 n n n y n + <blank> = testing incomplete on this feature or platform + W or C indicates workstation or cluster, respectively. + +Platform C F90 F90 C++ zlib SZIP + parallel parallel +SunOS5.8 64-bit n y n y y y +SunOS5.8 32-bit n y n y y y +SunOS5.10 64-bit n y n y y y +SunOS5.10 32-bit n y n y y y +IRIX64_6.5 64-bit n y y y y y +IRIX64_6.5 32-bit n n n n y y +AIX-5.2 32-bit y y y y y y +AIX-5.2 64-bit y y y y y y +Cray XT3 (not tested + for this release) n n n n n n +Windows XP n y(3) n(3) y y y +Windows XP x64 n y(3) n(3) y y y +Windows Vista n n n y y y +Mac OS X 10.4 PowerPC n n +Mac OS X 10.4 Intel n y n y y y +FreeBSD 6.2 32-bit n n n y y y +FreeBSD 6.2 64-bit +RedHat EL4 2.6.9 i686 GNU W y(2) y(4) y(2) y y y +RedHat EL4 2.6.9 i686 Intel W n y n y y n +RedHat EL4 2.6.9 i686 PGI W n y n y y n +SuSe Linux 2.6.16 x86_64 GNU (5) W y(2) y n y y y +SuSe Linux 2.6.16 x86_64 Int (5) W n y n y n n +SuSe Linux 2.6.16 x86_64 PGI (5) W n y n y n n +RHL9 Linux 2.4 Xeon Lustre Intel C n y n y y n +RHEL3 Linux 2.4 Xeon Intel W n y n n y n +RHEL4 Linux 2.6 Xeon Lustre Int C n y n y y n +SuSE Linux 2.4 ia64 Intel C y(1) y y y y y +SuSe Linux 2.6.5 + SGI Altix ia64 Intel C n y n y n y +Alpha OpenVMS 7.3.2 n y n y n n + + + +Platform Shared Shared Shared static- Thread- + C libs F90 libs C++ libs exec safe +SunOS 5.8 32-bit y y y x y +SunOS 5.8 64-bit y y y x y +SunOS 5.10 32-bit y y y x y +SunOS 5.10 64-bit y y y x y +IRIX64_6.5 32-bit y n y x y +IRIX64_6.5 64-bit y y n x y +AIX-5.2 32-bit n n n x n +AIX-5.2 64-bit n n n x n +Cray XT3 (not tested + for this release) n n n x n +Windows XP y y(3) y y y +Windows XP x64 y y(3) y y y +Windows Vista y n n y y +Mac OS X 10.4 Intel Duo y y y x n +FreeBSD 6.2 32-bit y y y x n +FreeBSD 6.2 64-bit y y y x n +RHEL4 2.6.9 i686 GNU W y y(4) y x y +RHEL4 2.6.9 i686 Intel W y y y x n +RHEL4 2.6.9 i686 PGI W y y y x n +SuSE Linux 2.6.16 x86_64 GNU (5) W y y y x y +SuSE Linux 2.6.16 x86_64 Intel(5) W y y y x n +SuSE Linux 2.6.16 x86_64 PGI(5) W y y y x n +RHL9 Linux 2.4 Xeon Lustre Intel C y y y x n +RHEL3 Linux 2.4 Xeon Intel W y n n x n +RHEL4 Linux 2.6 Xeon Lustre Intel C y y y x n +SuSE Linux 2.4 ia64 Intel C y y y x n +SuSe Linux 2.6.5 + SGI Altix ia64 Intel C n n n x n Notes: (1) Using mpich 1.2.6. - (1a) Using mpich2 1.0.6. - (2) Using mpt and mpich 1.2.6. - (3) Linux 2.6 with GNU, Intel, and PGI compilers, as indicated. - W or C indicates workstation or cluster, respectively. - - (6) Linux 2.4.21-32.0.1. Xeon cluster with ELsmp_perfctr_lustre - and Intel compilers - (7) Linux 2.4.21, SuSE_292.till. Ia64 cluster with Intel compilers - (8) pgf90 - (9) With Compaq Visual Fortran 6.6c compiler. - (10) With PGI and Absoft compilers. - (11) PGI and Intel compilers for both C and Fortran - (12) AMD Opteron x86_64 - (13) ifort - (14) Yes with C and Fortran, but not with C++ - (15) Using Visual Studio 2005 or Cygwin - (16) Not tested for this release. + (2) Using mpich2 1.0.6. + (3) Using Visual Studio 2005 or Cygwin + (4) With PGI and Absoft compilers. + (5) AMD Opteron x86_64 Compiler versions for each platform are listed in the preceding "Platforms Tested" table. @@ -1310,12 +405,6 @@ Known Problems the different precision in the values displayed and h5ls appears to be dumping floating-point numbers correctly. -* Before building HDF5 F90 Library from source on Crays - replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src - subdirectory in the top level directory with the Cray-specific files - from this site: - ftp://www.hdfgroup.uiuc.edu/pub/outgoing/hdf5/hdf5-1.8.0-pre/PATCH/ - * Not all platforms behave correctly with szip's shared libraries. Szip is disabled in these cases, and a message is relayed at configure time. Static libraries should be working on all systems that support szip, and should be @@ -1328,23 +417,6 @@ Known Problems complaining about exit subroutine. Comment out the line IF (total_error .ne. 0) CALL exit (total_error) -* On IA32 and IA64 systems, if you use a compiler other than GCC (such as - Intel's ecc or icc compilers), you will need to modify the generated - "libtool" program after configuration is finished. On or around line 104 of - the libtool file, there are lines which look like: - - # How to pass a linker flag through the compiler. - wl="" - - change these lines to this: - - # How to pass a linker flag through the compiler. - wl="-Wl," - - UPDATE: This is now done automatically by the configure script. However, if - you still experience a problem, you may want to check this line in the - libtool file and make sure that it has the correct value. - * Information about building with PGI and Intel compilers is available in INSTALL file sections 5.7 and 5.8 |