summaryrefslogtreecommitdiffstats
path: root/release_docs/USING_HDF5_CMake.txt
diff options
context:
space:
mode:
Diffstat (limited to 'release_docs/USING_HDF5_CMake.txt')
-rw-r--r--release_docs/USING_HDF5_CMake.txt179
1 files changed, 90 insertions, 89 deletions
diff --git a/release_docs/USING_HDF5_CMake.txt b/release_docs/USING_HDF5_CMake.txt
index 514cced..5fdb76c 100644
--- a/release_docs/USING_HDF5_CMake.txt
+++ b/release_docs/USING_HDF5_CMake.txt
@@ -2,60 +2,60 @@
* Build and Install HDF5 Applications with CMake *
************************************************************************
-Notes: This short instruction is written for users who want to quickly
- build HDF5 applications using the CMake tools. Users can adapt
- these instructions for their own applications. For more information,
+Notes: This short instruction is written for users who want to quickly
+ build HDF5 applications using the CMake tools. Users can adapt
+ these instructions for their own applications. For more information,
see the "Minimum C Project Files for CMake" section.
-
- More information about using CMake can be found at the KitWare
+
+ More information about using CMake can be found at the KitWare
site, www.cmake.org.
-
- CMake uses the command line; however, the visual CMake tool is
+
+ CMake uses the command line; however, the visual CMake tool is
available for the configuration step. The steps are similar for
all of the operating systems supported by CMake.
-
+
NOTES:
- 1. Using CMake for building and using HDF5 is under active
- development. While we have attempted to provide error-free
- files, please understand that development with CMake has not
- been extensively tested outside of HDF. The CMake specific
+ 1. Using CMake for building and using HDF5 is under active
+ development. While we have attempted to provide error-free
+ files, please understand that development with CMake has not
+ been extensively tested outside of HDF. The CMake specific
files may change before the next release.
-
- 2. CMake for HDF5 development should be usable on any system
- where CMake is supported. Please send us any comments on how
- CMake support can be improved on any system.
-
- 3. See the appendix at the bottom of this file for an example
- of using a ctest script for building and testing. See
+
+ 2. CMake for HDF5 development should be usable on any system
+ where CMake is supported. Please send us any comments on how
+ CMake support can be improved on any system.
+
+ 3. See the appendix at the bottom of this file for an example
+ of using a ctest script for building and testing. See
INSTALL_CMake.txt for more information.
========================================================================
-I. Preconditions
+I. Preconditions
========================================================================
1. We suggest you obtain the latest CMake for windows from the Kitware
- web site. The HDF5 1.8.x product requires a minimum CMake version
- of 3.1.0.
-
- 2. You have installed the HDF5 library built with CMake, by executing
- the HDF Install Utility (the *.exe file in the binary package for
- Windows). If you are using a Windows platform, you can obtain a
- pre-built Windows binary from The HDF Group's website at
+ web site. The HDF5 1.8.x product requires a minimum CMake version
+ of 3.1.0.
+
+ 2. You have installed the HDF5 library built with CMake, by executing
+ the HDF Install Utility (the *.msi file in the binary package for
+ Windows). If you are using a Windows platform, you can obtain a
+ pre-built Windows binary from The HDF Group's website at
www.hdfgroup.org.
- 3. Set the environment variable HDF5_DIR to the installed location of
- the config files for HDF5. On Windows:
- HDF5_DIR=C:/Program Files/HDF_Group/HDF5/1.8.x/cmake/hdf5
-
+ 3. Set the environment variable HDF5_DIR to the installed location of
+ the config files for HDF5. On Windows:
+ HDF5_DIR=C:/Program Files/HDF_Group/HDF5/1.8.x/cmake
+
(Note there are no quote characters used on Windows and all platforms
use forward slashes)
4. Created separate source and build directories.
(CMake commands are executed in the build directory)
- 5. Created a CMakeLists.txt file(s) for your source. See Section III
+ 5. Created a CMakeLists.txt file(s) for your source. See Section III
below.
@@ -65,6 +65,7 @@ II. Building HDF5 Applications with CMake
========================================================================
Go through these steps to build HDF5 applications with CMake.
+ (The application must support building with CMake.)
1. Run CMake
2. Configure the cache settings
@@ -79,22 +80,22 @@ These steps are described in more detail below.
The visual CMake executable is named "cmake-gui.exe" on Windows and should be
available in your Start menu. For Linux, UNIX, and Mac users the
- executable is named "cmake-gui" and can be found where CMake was
- installed.
-
- Specify the source and build directories. Make the build and source
- directories different. For example on Windows, if the source is at
- c:\MyHDFstuff\hdf5, then use c:\MyHDFstuff\hdf5\build or
- c:\MyHDFstuff\build\hdf5 for the build directory.
-
+ executable is named "cmake-gui" and can be found where CMake was
+ installed.
+
+ Specify the source and build directories. Make the build and source
+ directories different. For example on Windows, if the source is at
+ c:\MyHDFstuff\hdf5, then use c:\MyHDFstuff\hdf5\build or
+ c:\MyHDFstuff\build\hdf5 for the build directory.
+
PREFERRED:
- Users can perform the configuration step without using the visual
- cmake-gui program. The following is an example command line
+ Users can perform the configuration step without using the visual
+ cmake-gui program. The following is an example command line
configuration step executed within the build directory:
-
+
cmake -G "<generator>" [-D<options>] <sourcepath>
-
- Where <generator> is
+
+ Where <generator> is
* MinGW Makefiles
* NMake Makefiles
* Unix Makefiles
@@ -111,63 +112,63 @@ These steps are described in more detail below.
2. Configure the cache settings
- 2.1 Visual CMake users, click the Configure button. If this is the first time you are
- running cmake-gui in this directory, you will be prompted for the
- generator you wish to use (for example on Windows, Visual Studio 10).
- CMake will read in the CMakeLists.txt files from the source directory and
- display options for the HDF5 project. After the first configure you
+ 2.1 Visual CMake users, click the Configure button. If this is the first time you are
+ running cmake-gui in this directory, you will be prompted for the
+ generator you wish to use (for example on Windows, Visual Studio 10).
+ CMake will read in the CMakeLists.txt files from the source directory and
+ display options for the HDF5 project. After the first configure you
can adjust the cache settings and/or specify locations of other programs.
-
+
Any conflicts or new values will be highlighted by the configure
- process in red. Once you are happy with all the settings and there are no
- more values in red, click the Generate button to produce the appropriate
- build files.
-
- On Windows, if you are using a Visual Studio generator, the solution and
+ process in red. Once you are happy with all the settings and there are no
+ more values in red, click the Generate button to produce the appropriate
+ build files.
+
+ On Windows, if you are using a Visual Studio generator, the solution and
project files will be created in the build folder.
-
+
On linux, if you are using the Unix Makefiles generator, the Makefiles will
be created in the build folder.
2.2 Alternative command line example on Windows in c:\MyHDFstuff\hdf5\build directory:
-
+
cmake -G "Visual Studio 11" -DBUILD_TESTING:BOOL=ON ..
3. Build HDF5 Applications
-
- On Windows, you can build HDF5 applications using either the Visual Studio Environment
+
+ On Windows, you can build HDF5 applications using either the Visual Studio Environment
or the command line. The command line is normally used on linux, Unix, and Mac.
To build from the command line, navigate to your build directory and
execute the following:
-
- cmake --build . --config {Debug | Release}
-
+
+ cmake --build . --config {Debug | Release}
+
NOTE: "--config {Debug | Release}" may be optional on your platform. We
recommend choosing either Debug or Release on Windows. If you are
- using the pre-built binaries from HDF, use Release.
-
- 3.1 If you wish to use the Visual Studio environment, open the solution
- file in your build directory. Be sure to select either Debug or
+ using the pre-built binaries from HDF, use Release.
+
+ 3.1 If you wish to use the Visual Studio environment, open the solution
+ file in your build directory. Be sure to select either Debug or
Release and build the solution.
-
+
4. Test HDF5 Applications
To test the build, navigate to your build directory and execute:
-
+
ctest . -C {Debug | Release}
-
+
NOTE: "-C {Debug | Release}" may be optional on your platform. We
recommend choosing either Debug or Release to match the build
- step on Windows.
+ step on Windows.
- 5. The files that support building with CMake are all of the files in the
- config/cmake folder, the CMakeLists.txt files in each source folder, and
- CTestConfig.cmake. CTestConfig.cmake is specific to the internal testing
- performed by The HDF Group. It should be altered for the user's
+ 5. The files that support building with CMake are all of the files in the
+ config/cmake folder, the CMakeLists.txt files in each source folder, and
+ CTestConfig.cmake. CTestConfig.cmake is specific to the internal testing
+ performed by The HDF Group. It should be altered for the user's
installation and needs. The cacheinit.cmake file settings are used by
- The HDF Group for daily testing. It should be altered/ignored for the user's
- installation and needs.
+ The HDF Group for daily testing. It should be altered/ignored for the user's
+ installation and needs.
@@ -175,17 +176,17 @@ These steps are described in more detail below.
III. Minimum C Project Files for CMake
========================================================================
-Create a CMakeLists.txt file at the source root. Include the
+Create a CMakeLists.txt file at the source root. Include the
following text in the file:
##########################################################
cmake_minimum_required (VERSION 3.1.0)
-PROJECT (HDF5MyApp C CXX)
+project (HDF5MyApp C CXX)
-FIND_PACKAGE (HDF5 NAMES hdf5)
-# FIND_PACKAGE (HDF5) # Find non-cmake built HDF5
+find_package (HDF5 NAMES hdf5 COMPONENTS C static)
+# find_package (HDF5) # Find non-cmake built HDF5
INCLUDE_DIRECTORIES (${HDF5_INCLUDE_DIR})
-set (LINK_LIBS ${LINK_LIBS} ${HDF5_LIBRARIES})
+set (LINK_LIBS ${LINK_LIBS} ${HDF5_C_STATIC_LIBRARY})
set (example hdf_example)
@@ -193,7 +194,7 @@ add_executable (${example} ${PROJECT_SOURCE_DIR}/${example}.c)
TARGET_C_PROPERTIES (${example} " " " ")
target_link_libraries (${example} ${LINK_LIBS})
-ENABLE_TESTING ()
+enable_testing ()
include (CTest)
add_test (NAME test_example COMMAND ${example})
@@ -216,8 +217,8 @@ NOTE: these files are available at the HDF web site:
http://www.hdfgroup.org/HDF5/release/cmakebuild.html
CTestScript.cmake
-
- HDF518ExamplesWindowsbinaryCMake.cmake
+
+ HDF518_Examples.cmake
@@ -226,10 +227,10 @@ ctest
========================================================================
############################################################################
-# Product specific script, HDF518Example.cmake, that uses the
+# Product specific script, HDF518_Examples.cmake, that uses the
# CTestScript.cmake file (see Appendix in the CMake.txt). Usage:
-# "ctest -S HDF518Example.cmake,hdf518Examples -C Release -O hdf518EX.log"
-# where hdf518Examples is the source folder relative to the location of these scripts
+# "ctest -S HDF518_Examples.cmake,HDF5Examples-0.1.1-Source -C Release -O test.log"
+# where HDF5Examples-0.1.1-Source is the source folder relative to the location of these scripts
############################################################################
cmake_minimum_required(VERSION 3.1.0 FATAL_ERROR)
@@ -259,7 +260,7 @@ set(REPOSITORY_URL "http://svn.${hdfgroup_url}/hdf5-examples/trunk/1_8")
set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/hdf5Examples-1.8")
# location of the installed hdf5 (cmake configuration folder)
-set(ENV{HDF5_DIR} "/usr/share/cmake/hdf5")
+set(ENV{HDF5_DIR} "/usr/share/cmake")
include(${CTEST_SCRIPT_DIRECTORY}/CTestScript.cmake)