diff options
Diffstat (limited to 'src/H5C.c')
| -rw-r--r-- | src/H5C.c | 2577 |
1 files changed, 0 insertions, 2577 deletions
@@ -112,2583 +112,6 @@ #include "H5SLprivate.h" /* Skip lists */ -/**************************************************************************** - * - * We maintain doubly linked lists of instances of H5C_cache_entry_t for a - * variety of reasons -- protected list, LRU list, and the clean and dirty - * LRU lists at present. The following macros support linking and unlinking - * of instances of H5C_cache_entry_t by both their regular and auxilary next - * and previous pointers. - * - * The size and length fields are also maintained. - * - * Note that the relevant pair of prev and next pointers are presumed to be - * NULL on entry in the insertion macros. - * - * Finally, observe that the sanity checking macros evaluate to the empty - * string when H5C_DO_SANITY_CHECKS is FALSE. They also contain calls - * to the HGOTO_ERROR macro, which may not be appropriate in all cases. - * If so, we will need versions of the insertion and deletion macros which - * do not reference the sanity checking macros. - * JRM - 5/5/04 - * - * Changes: - * - * - Removed the line: - * - * ( ( (Size) == (entry_ptr)->size ) && ( (len) != 1 ) ) || - * - * from the H5C__DLL_PRE_REMOVE_SC macro. With the addition of the - * epoch markers used in the age out based cache size reduction algorithm, - * this invarient need not hold, as the epoch markers are of size 0. - * - * One could argue that I should have given the epoch markers a positive - * size, but this would break the index_size = LRU_list_size + pl_size - * + pel_size invarient. - * - * Alternatively, I could pass the current decr_mode in to the macro, - * and just skip the check whenever epoch markers may be in use. - * - * However, any size errors should be caught when the cache is flushed - * and destroyed. Until we are tracking such an error, this should be - * good enough. - * JRM - 12/9/04 - * - * - * - In the H5C__DLL_PRE_INSERT_SC macro, replaced the lines: - * - * ( ( (len) == 1 ) && - * ( ( (head_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || - * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) - * ) - * ) || - * - * with: - * - * ( ( (len) == 1 ) && - * ( ( (head_ptr) != (tail_ptr) ) || - * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) - * ) - * ) || - * - * Epoch markers have size 0, so we can now have a non-empty list with - * zero size. Hence the "( (Size) <= 0 )" clause cause false failures - * in the sanity check. Since "Size" is typically a size_t, it can't - * take on negative values, and thus the revised clause "( (Size) < 0 )" - * caused compiler warnings. - * JRM - 12/22/04 - * - * - In the H5C__DLL_SC macro, replaced the lines: - * - * ( ( (len) == 1 ) && - * ( ( (head_ptr) != (tail_ptr) ) || ( (cache_ptr)->size <= 0 ) || - * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) - * ) - * ) || - * - * with - * - * ( ( (len) == 1 ) && - * ( ( (head_ptr) != (tail_ptr) ) || - * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) - * ) - * ) || - * - * Epoch markers have size 0, so we can now have a non-empty list with - * zero size. Hence the "( (Size) <= 0 )" clause cause false failures - * in the sanity check. Since "Size" is typically a size_t, it can't - * take on negative values, and thus the revised clause "( (Size) < 0 )" - * caused compiler warnings. - * JRM - 1/10/05 - * - * - Added the H5C__DLL_UPDATE_FOR_SIZE_CHANGE macro and the associated - * sanity checking macros. These macro are used to update the size of - * a DLL when one of its entries changes size. - * - * JRM - 9/8/05 - * - ****************************************************************************/ - -#if H5C_DO_SANITY_CHECKS - -#define H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ -if ( ( (head_ptr) == NULL ) || \ - ( (tail_ptr) == NULL ) || \ - ( (entry_ptr) == NULL ) || \ - ( (len) <= 0 ) || \ - ( (Size) < (entry_ptr)->size ) || \ - ( ( (entry_ptr)->prev == NULL ) && ( (head_ptr) != (entry_ptr) ) ) || \ - ( ( (entry_ptr)->next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ - ( ( (len) == 1 ) && \ - ( ! ( ( (head_ptr) == (entry_ptr) ) && \ - ( (tail_ptr) == (entry_ptr) ) && \ - ( (entry_ptr)->next == NULL ) && \ - ( (entry_ptr)->prev == NULL ) && \ - ( (Size) == (entry_ptr)->size ) \ - ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL pre remove SC failed") \ -} - -#define H5C__DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ -if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ - ( (head_ptr) != (tail_ptr) ) \ - ) || \ - ( (len) < 0 ) || \ - ( (Size) < 0 ) || \ - ( ( (len) == 1 ) && \ - ( ( (head_ptr) != (tail_ptr) ) || \ - ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ - ) \ - ) || \ - ( ( (len) >= 1 ) && \ - ( ( (head_ptr) == NULL ) || ( (head_ptr)->prev != NULL ) || \ - ( (tail_ptr) == NULL ) || ( (tail_ptr)->next != NULL ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL sanity check failed") \ -} - -#define H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ -if ( ( (entry_ptr) == NULL ) || \ - ( (entry_ptr)->next != NULL ) || \ - ( (entry_ptr)->prev != NULL ) || \ - ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ - ( (head_ptr) != (tail_ptr) ) \ - ) || \ - ( (len) < 0 ) || \ - ( ( (len) == 1 ) && \ - ( ( (head_ptr) != (tail_ptr) ) || \ - ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ - ) \ - ) || \ - ( ( (len) >= 1 ) && \ - ( ( (head_ptr) == NULL ) || ( (head_ptr)->prev != NULL ) || \ - ( (tail_ptr) == NULL ) || ( (tail_ptr)->next != NULL ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL pre insert SC failed") \ -} - -#define H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ -if ( ( (dll_len) <= 0 ) || \ - ( (dll_size) <= 0 ) || \ - ( (old_size) <= 0 ) || \ - ( (old_size) > (dll_size) ) || \ - ( (new_size) <= 0 ) || \ - ( ( (dll_len) == 1 ) && ( (old_size) != (dll_size) ) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "DLL pre size update SC failed") \ -} - -#define H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ -if ( ( (new_size) > (dll_size) ) || \ - ( ( (dll_len) == 1 ) && ( (new_size) != (dll_size) ) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "DLL post size update SC failed") \ -} - -#else /* H5C_DO_SANITY_CHECKS */ - -#define H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) -#define H5C__DLL_SC(head_ptr, tail_ptr, len, Size, fv) -#define H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) -#define H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) -#define H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) - -#endif /* H5C_DO_SANITY_CHECKS */ - - -#define H5C__DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ - H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fail_val) \ - if ( (head_ptr) == NULL ) \ - { \ - (head_ptr) = (entry_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - else \ - { \ - (tail_ptr)->next = (entry_ptr); \ - (entry_ptr)->prev = (tail_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - (len)++; \ - (Size) += (entry_ptr)->size; - -#define H5C__DLL_PREPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ - H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fail_val) \ - if ( (head_ptr) == NULL ) \ - { \ - (head_ptr) = (entry_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - else \ - { \ - (head_ptr)->prev = (entry_ptr); \ - (entry_ptr)->next = (head_ptr); \ - (head_ptr) = (entry_ptr); \ - } \ - (len)++; \ - (Size) += entry_ptr->size; - -#define H5C__DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ - H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fail_val) \ - { \ - if ( (head_ptr) == (entry_ptr) ) \ - { \ - (head_ptr) = (entry_ptr)->next; \ - if ( (head_ptr) != NULL ) \ - { \ - (head_ptr)->prev = NULL; \ - } \ - } \ - else \ - { \ - (entry_ptr)->prev->next = (entry_ptr)->next; \ - } \ - if ( (tail_ptr) == (entry_ptr) ) \ - { \ - (tail_ptr) = (entry_ptr)->prev; \ - if ( (tail_ptr) != NULL ) \ - { \ - (tail_ptr)->next = NULL; \ - } \ - } \ - else \ - { \ - (entry_ptr)->next->prev = (entry_ptr)->prev; \ - } \ - entry_ptr->next = NULL; \ - entry_ptr->prev = NULL; \ - (len)--; \ - (Size) -= entry_ptr->size; \ - } - -#define H5C__DLL_UPDATE_FOR_SIZE_CHANGE(dll_len, dll_size, old_size, new_size) \ - H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ - (dll_size) -= (old_size); \ - (dll_size) += (new_size); \ - H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) - -#if H5C_DO_SANITY_CHECKS - -#define H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ -if ( ( (hd_ptr) == NULL ) || \ - ( (tail_ptr) == NULL ) || \ - ( (entry_ptr) == NULL ) || \ - ( (len) <= 0 ) || \ - ( (Size) < (entry_ptr)->size ) || \ - ( ( (Size) == (entry_ptr)->size ) && ( ! ( (len) == 1 ) ) ) || \ - ( ( (entry_ptr)->aux_prev == NULL ) && ( (hd_ptr) != (entry_ptr) ) ) || \ - ( ( (entry_ptr)->aux_next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ - ( ( (len) == 1 ) && \ - ( ! ( ( (hd_ptr) == (entry_ptr) ) && ( (tail_ptr) == (entry_ptr) ) && \ - ( (entry_ptr)->aux_next == NULL ) && \ - ( (entry_ptr)->aux_prev == NULL ) && \ - ( (Size) == (entry_ptr)->size ) \ - ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "aux DLL pre remove SC failed") \ -} - -#define H5C__AUX_DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ -if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ - ( (head_ptr) != (tail_ptr) ) \ - ) || \ - ( (len) < 0 ) || \ - ( (Size) < 0 ) || \ - ( ( (len) == 1 ) && \ - ( ( (head_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ - ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ - ) \ - ) || \ - ( ( (len) >= 1 ) && \ - ( ( (head_ptr) == NULL ) || ( (head_ptr)->aux_prev != NULL ) || \ - ( (tail_ptr) == NULL ) || ( (tail_ptr)->aux_next != NULL ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "AUX DLL sanity check failed") \ -} - -#define H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ -if ( ( (entry_ptr) == NULL ) || \ - ( (entry_ptr)->aux_next != NULL ) || \ - ( (entry_ptr)->aux_prev != NULL ) || \ - ( ( ( (hd_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ - ( (hd_ptr) != (tail_ptr) ) \ - ) || \ - ( (len) < 0 ) || \ - ( ( (len) == 1 ) && \ - ( ( (hd_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ - ( (hd_ptr) == NULL ) || ( (hd_ptr)->size != (Size) ) \ - ) \ - ) || \ - ( ( (len) >= 1 ) && \ - ( ( (hd_ptr) == NULL ) || ( (hd_ptr)->aux_prev != NULL ) || \ - ( (tail_ptr) == NULL ) || ( (tail_ptr)->aux_next != NULL ) \ - ) \ - ) \ - ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "AUX DLL pre insert SC failed") \ -} - -#else /* H5C_DO_SANITY_CHECKS */ - -#define H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) -#define H5C__AUX_DLL_SC(head_ptr, tail_ptr, len, Size, fv) -#define H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) - -#endif /* H5C_DO_SANITY_CHECKS */ - - -#define H5C__AUX_DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val)\ - H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fail_val) \ - if ( (head_ptr) == NULL ) \ - { \ - (head_ptr) = (entry_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - else \ - { \ - (tail_ptr)->aux_next = (entry_ptr); \ - (entry_ptr)->aux_prev = (tail_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - (len)++; \ - (Size) += entry_ptr->size; - -#define H5C__AUX_DLL_PREPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ - H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fv) \ - if ( (head_ptr) == NULL ) \ - { \ - (head_ptr) = (entry_ptr); \ - (tail_ptr) = (entry_ptr); \ - } \ - else \ - { \ - (head_ptr)->aux_prev = (entry_ptr); \ - (entry_ptr)->aux_next = (head_ptr); \ - (head_ptr) = (entry_ptr); \ - } \ - (len)++; \ - (Size) += entry_ptr->size; - -#define H5C__AUX_DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ - H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ - fv) \ - { \ - if ( (head_ptr) == (entry_ptr) ) \ - { \ - (head_ptr) = (entry_ptr)->aux_next; \ - if ( (head_ptr) != NULL ) \ - { \ - (head_ptr)->aux_prev = NULL; \ - } \ - } \ - else \ - { \ - (entry_ptr)->aux_prev->aux_next = (entry_ptr)->aux_next; \ - } \ - if ( (tail_ptr) == (entry_ptr) ) \ - { \ - (tail_ptr) = (entry_ptr)->aux_prev; \ - if ( (tail_ptr) != NULL ) \ - { \ - (tail_ptr)->aux_next = NULL; \ - } \ - } \ - else \ - { \ - (entry_ptr)->aux_next->aux_prev = (entry_ptr)->aux_prev; \ - } \ - entry_ptr->aux_next = NULL; \ - entry_ptr->aux_prev = NULL; \ - (len)--; \ - (Size) -= entry_ptr->size; \ - } - - -/*********************************************************************** - * - * Stats collection macros - * - * The following macros must handle stats collection when this collection - * is enabled, and evaluate to the empty string when it is not. - * - * The sole exception to this rule is - * H5C__UPDATE_CACHE_HIT_RATE_STATS(), which is always active as - * the cache hit rate stats are always collected and available. - * - * Changes: - * - * JRM -- 3/21/06 - * Added / updated macros for pinned entry related stats. - * - * JRM -- 8/9/06 - * More pinned entry stats related updates. - * - * JRM -- 3/31/07 - * Updated H5C__UPDATE_STATS_FOR_PROTECT() to keep stats on - * read and write protects. - * - * MAM -- 1/15/09 - * Created H5C__UPDATE_MAX_INDEX_SIZE_STATS to contain - * common code within macros that update the maximum - * index, clean_index, and dirty_index statistics fields. - * - ***********************************************************************/ - -#define H5C__UPDATE_CACHE_HIT_RATE_STATS(cache_ptr, hit) \ - (cache_ptr->cache_accesses)++; \ - if ( hit ) { \ - (cache_ptr->cache_hits)++; \ - } \ - -#if H5C_COLLECT_CACHE_STATS - -#define H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->index_size > (cache_ptr)->max_index_size ) \ - (cache_ptr)->max_index_size = (cache_ptr)->index_size; \ - if ( (cache_ptr)->clean_index_size > \ - (cache_ptr)->max_clean_index_size ) \ - (cache_ptr)->max_clean_index_size = \ - (cache_ptr)->clean_index_size; \ - if ( (cache_ptr)->dirty_index_size > \ - (cache_ptr)->max_dirty_index_size ) \ - (cache_ptr)->max_dirty_index_size = \ - (cache_ptr)->dirty_index_size; - -#define H5C__UPDATE_STATS_FOR_DIRTY_PIN(cache_ptr, entry_ptr) \ - (((cache_ptr)->dirty_pins)[(entry_ptr)->type->id])++; - -#define H5C__UPDATE_STATS_FOR_UNPROTECT(cache_ptr) \ - if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ - (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ - if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ - (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ - if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ - (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ - if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ - (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; - -#define H5C__UPDATE_STATS_FOR_RENAME(cache_ptr, entry_ptr) \ - if ( cache_ptr->flush_in_progress ) { \ - ((cache_ptr)->cache_flush_renames[(entry_ptr)->type->id])++; \ - } \ - if ( entry_ptr->flush_in_progress ) { \ - ((cache_ptr)->entry_flush_renames[(entry_ptr)->type->id])++; \ - } \ - (((cache_ptr)->renames)[(entry_ptr)->type->id])++; - -#define H5C__UPDATE_STATS_FOR_ENTRY_SIZE_CHANGE(cache_ptr, entry_ptr, new_size)\ - if ( cache_ptr->flush_in_progress ) { \ - ((cache_ptr)->cache_flush_size_changes[(entry_ptr)->type->id])++; \ - } \ - if ( entry_ptr->flush_in_progress ) { \ - ((cache_ptr)->entry_flush_size_changes[(entry_ptr)->type->id])++; \ - } \ - if ( (entry_ptr)->size < (new_size) ) { \ - ((cache_ptr)->size_increases[(entry_ptr)->type->id])++; \ - H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ - (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ - if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ - (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; \ - } else if ( (entry_ptr)->size > (new_size) ) { \ - ((cache_ptr)->size_decreases[(entry_ptr)->type->id])++; \ - } - -#define H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) \ - (cache_ptr)->total_ht_insertions++; - -#define H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) \ - (cache_ptr)->total_ht_deletions++; - -#define H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, success, depth) \ - if ( success ) { \ - (cache_ptr)->successful_ht_searches++; \ - (cache_ptr)->total_successful_ht_search_depth += depth; \ - } else { \ - (cache_ptr)->failed_ht_searches++; \ - (cache_ptr)->total_failed_ht_search_depth += depth; \ - } - -#define H5C__UPDATE_STATS_FOR_UNPIN(cache_ptr, entry_ptr) \ - ((cache_ptr)->unpins)[(entry_ptr)->type->id]++; - -#if H5C_COLLECT_CACHE_ENTRY_STATS - -#define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) \ - (entry_ptr)->accesses = 0; \ - (entry_ptr)->clears = 0; \ - (entry_ptr)->flushes = 0; \ - (entry_ptr)->pins = 0; - -#define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) \ - (((cache_ptr)->clears)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_clears)[(entry_ptr)->type->id])++; \ - } \ - ((entry_ptr)->clears)++; - -#define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) \ - (((cache_ptr)->flushes)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_flushes)[(entry_ptr)->type->id])++; \ - } \ - ((entry_ptr)->flushes)++; - -#define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr) \ - (((cache_ptr)->evictions)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->accesses > \ - ((cache_ptr)->max_accesses)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_accesses)[(entry_ptr)->type->id] \ - = (entry_ptr)->accesses; \ - } \ - if ( (entry_ptr)->accesses < \ - ((cache_ptr)->min_accesses)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->min_accesses)[(entry_ptr)->type->id] \ - = (entry_ptr)->accesses; \ - } \ - if ( (entry_ptr)->clears > \ - ((cache_ptr)->max_clears)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_clears)[(entry_ptr)->type->id] \ - = (entry_ptr)->clears; \ - } \ - if ( (entry_ptr)->flushes > \ - ((cache_ptr)->max_flushes)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_flushes)[(entry_ptr)->type->id] \ - = (entry_ptr)->flushes; \ - } \ - if ( (entry_ptr)->size > \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] \ - = (entry_ptr)->size; \ - } \ - if ( (entry_ptr)->pins > \ - ((cache_ptr)->max_pins)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_pins)[(entry_ptr)->type->id] \ - = (entry_ptr)->pins; \ - } - -#define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) \ - (((cache_ptr)->insertions)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_insertions)[(entry_ptr)->type->id])++; \ - ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ - (entry_ptr)->pins++; \ - if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ - (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ - if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ - (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ - } \ - if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ - (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ - H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ - (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ - if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ - (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ - if ( (entry_ptr)->size > \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] \ - = (entry_ptr)->size; \ - } - -#define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) \ - if ( hit ) \ - ((cache_ptr)->hits)[(entry_ptr)->type->id]++; \ - else \ - ((cache_ptr)->misses)[(entry_ptr)->type->id]++; \ - if ( ! ((entry_ptr)->is_read_only) ) { \ - ((cache_ptr)->write_protects)[(entry_ptr)->type->id]++; \ - } else { \ - ((cache_ptr)->read_protects)[(entry_ptr)->type->id]++; \ - if ( ((entry_ptr)->ro_ref_count) > \ - ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] = \ - ((entry_ptr)->ro_ref_count); \ - } \ - } \ - if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ - (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ - H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->pl_len > (cache_ptr)->max_pl_len ) \ - (cache_ptr)->max_pl_len = (cache_ptr)->pl_len; \ - if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ - (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; \ - if ( (entry_ptr)->size > \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_size)[(entry_ptr)->type->id] \ - = (entry_ptr)->size; \ - } \ - ((entry_ptr)->accesses)++; - -#define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) \ - ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ - (entry_ptr)->pins++; \ - if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ - (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ - if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ - (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; - -#else /* H5C_COLLECT_CACHE_ENTRY_STATS */ - -#define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) - -#define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_clears)[(entry_ptr)->type->id])++; \ - } \ - (((cache_ptr)->clears)[(entry_ptr)->type->id])++; - -#define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) \ - (((cache_ptr)->flushes)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_flushes)[(entry_ptr)->type->id])++; \ - } - -#define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr) \ - (((cache_ptr)->evictions)[(entry_ptr)->type->id])++; - -#define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) \ - (((cache_ptr)->insertions)[(entry_ptr)->type->id])++; \ - if ( (entry_ptr)->is_pinned ) { \ - (((cache_ptr)->pinned_insertions)[(entry_ptr)->type->id])++; \ - ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ - if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ - (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ - if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ - (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ - } \ - if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ - (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ - H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ - (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ - if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ - (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; - -#define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) \ - if ( hit ) \ - ((cache_ptr)->hits)[(entry_ptr)->type->id]++; \ - else \ - ((cache_ptr)->misses)[(entry_ptr)->type->id]++; \ - if ( ! ((entry_ptr)->is_read_only) ) { \ - ((cache_ptr)->write_protects)[(entry_ptr)->type->id]++; \ - } else { \ - ((cache_ptr)->read_protects)[(entry_ptr)->type->id]++; \ - if ( ((entry_ptr)->ro_ref_count) > \ - ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] ) { \ - ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] = \ - ((entry_ptr)->ro_ref_count); \ - } \ - } \ - if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ - (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ - H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ - if ( (cache_ptr)->pl_len > (cache_ptr)->max_pl_len ) \ - (cache_ptr)->max_pl_len = (cache_ptr)->pl_len; \ - if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ - (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; - -#define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) \ - ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ - if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ - (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ - if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ - (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; - -#endif /* H5C_COLLECT_CACHE_ENTRY_STATS */ - -#else /* H5C_COLLECT_CACHE_STATS */ - -#define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) -#define H5C__UPDATE_STATS_FOR_DIRTY_PIN(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_UNPROTECT(cache_ptr) -#define H5C__UPDATE_STATS_FOR_RENAME(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_ENTRY_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) -#define H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) -#define H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) -#define H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, success, depth) -#define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) -#define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) -#define H5C__UPDATE_STATS_FOR_UNPIN(cache_ptr, entry_ptr) - -#endif /* H5C_COLLECT_CACHE_STATS */ - - -/*********************************************************************** - * - * Hash table access and manipulation macros: - * - * The following macros handle searches, insertions, and deletion in - * the hash table. - * - * When modifying these macros, remember to modify the similar macros - * in tst/cache.c - * - * Changes: - * - * - Updated existing index macros and sanity check macros to maintain - * the clean_index_size and dirty_index_size fields of H5C_t. Also - * added macros to allow us to track entry cleans and dirties. - * - * JRM -- 11/5/08 - * - ***********************************************************************/ - -/* H5C__HASH_TABLE_LEN is defined in H5Cpkg.h. It mut be a power of two. */ - -#define H5C__HASH_MASK ((size_t)(H5C__HASH_TABLE_LEN - 1) << 3) - -#define H5C__HASH_FCN(x) (int)(((x) & H5C__HASH_MASK) >> 3) - -#if H5C_DO_SANITY_CHECKS - -#define H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (entry_ptr) == NULL ) || \ - ( ! H5F_addr_defined((entry_ptr)->addr) ) || \ - ( (entry_ptr)->ht_next != NULL ) || \ - ( (entry_ptr)->ht_prev != NULL ) || \ - ( (entry_ptr)->size <= 0 ) || \ - ( (k = H5C__HASH_FCN((entry_ptr)->addr)) < 0 ) || \ - ( k >= H5C__HASH_TABLE_LEN ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + \ - (cache_ptr)->dirty_index_size) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, \ - "Pre HT insert SC failed") \ -} - -#define H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (cache_ptr)->index_len < 1 ) || \ - ( (entry_ptr) == NULL ) || \ - ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ - ( ! H5F_addr_defined((entry_ptr)->addr) ) || \ - ( (entry_ptr)->size <= 0 ) || \ - ( H5C__HASH_FCN((entry_ptr)->addr) < 0 ) || \ - ( H5C__HASH_FCN((entry_ptr)->addr) >= H5C__HASH_TABLE_LEN ) || \ - ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] \ - == NULL ) || \ - ( ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] \ - != (entry_ptr) ) && \ - ( (entry_ptr)->ht_prev == NULL ) ) || \ - ( ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] == \ - (entry_ptr) ) && \ - ( (entry_ptr)->ht_prev != NULL ) ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + \ - (cache_ptr)->dirty_index_size) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "Pre HT remove SC failed") \ -} - -#define H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ - ( ! H5F_addr_defined(Addr) ) || \ - ( H5C__HASH_FCN(Addr) < 0 ) || \ - ( H5C__HASH_FCN(Addr) >= H5C__HASH_TABLE_LEN ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "Pre HT search SC failed") \ -} - -#define H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, Addr, k, fail_val) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (cache_ptr)->index_len < 1 ) || \ - ( (entry_ptr) == NULL ) || \ - ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ - ( H5F_addr_ne((entry_ptr)->addr, (Addr)) ) || \ - ( (entry_ptr)->size <= 0 ) || \ - ( ((cache_ptr)->index)[k] == NULL ) || \ - ( ( ((cache_ptr)->index)[k] != (entry_ptr) ) && \ - ( (entry_ptr)->ht_prev == NULL ) ) || \ - ( ( ((cache_ptr)->index)[k] == (entry_ptr) ) && \ - ( (entry_ptr)->ht_prev != NULL ) ) || \ - ( ( (entry_ptr)->ht_prev != NULL ) && \ - ( (entry_ptr)->ht_prev->ht_next != (entry_ptr) ) ) || \ - ( ( (entry_ptr)->ht_next != NULL ) && \ - ( (entry_ptr)->ht_next->ht_prev != (entry_ptr) ) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, \ - "Post successful HT search SC failed") \ -} - -#define H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ -if ( ( (cache_ptr) == NULL ) || \ - ( ((cache_ptr)->index)[k] != (entry_ptr) ) || \ - ( (entry_ptr)->ht_prev != NULL ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, \ - "Post HT shift to front SC failed") \ -} - -#define H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ - entry_ptr, was_clean) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->index_len <= 0 ) || \ - ( (cache_ptr)->index_size <= 0 ) || \ - ( (new_size) <= 0 ) || \ - ( (old_size) > (cache_ptr)->index_size ) || \ - ( (new_size) <= 0 ) || \ - ( ( (cache_ptr)->index_len == 1 ) && \ - ( (cache_ptr)->index_size != (old_size) ) ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + \ - (cache_ptr)->dirty_index_size) ) || \ - ( (entry_ptr == NULL) ) || \ - ( ( !( was_clean ) || \ - ( (cache_ptr)->clean_index_size < (old_size) ) ) && \ - ( ( (was_clean) ) || \ - ( (cache_ptr)->dirty_index_size < (old_size) ) ) ) \ - ( (entry_ptr) == NULL ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Pre HT entry size change SC failed") \ -} - -#define H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ - entry_ptr) \ -if ( ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->index_len <= 0 ) || \ - ( (cache_ptr)->index_size <= 0 ) || \ - ( (new_size) > (cache_ptr)->index_size ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + \ - (cache_ptr)->dirty_index_size) ) || \ - ( ( !((entry_ptr)->is_dirty ) || \ - ( (cache_ptr)->dirty_index_size < (new_size) ) ) && \ - ( ( ((entry_ptr)->is_dirty) ) || \ - ( (cache_ptr)->clean_index_size < (new_size) ) ) ) \ - ( ( (cache_ptr)->index_len == 1 ) && \ - ( (cache_ptr)->index_size != (new_size) ) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Post HT entry size change SC failed") \ -} - -#define H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) \ -if ( \ - ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (cache_ptr)->index_len <= 0 ) || \ - ( (entry_ptr) == NULL ) || \ - ( (entry_ptr)->is_dirty != FALSE ) || \ - ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ - ( (cache_ptr)->dirty_index_size < (entry_ptr)->size ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Pre HT update for entry clean SC failed") \ -} - -#define H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) \ -if ( \ - ( (cache_ptr) == NULL ) || \ - ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ - ( (cache_ptr)->index_len <= 0 ) || \ - ( (entry_ptr) == NULL ) || \ - ( (entry_ptr)->is_dirty != TRUE ) || \ - ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ - ( (cache_ptr)->clean_index_size < (entry_ptr)->size ) || \ - ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Pre HT update for entry dirty SC failed") \ -} - -#define H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) \ -if ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Post HT update for entry clean SC failed") \ -} - -#define H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) \ -if ( (cache_ptr)->index_size != \ - ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) { \ - HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, \ - "Post HT update for entry dirty SC failed") \ -} - -#else /* H5C_DO_SANITY_CHECKS */ - -#define H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) -#define H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) -#define H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) -#define H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, Addr, k, fail_val) -#define H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) -#define H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) -#define H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) -#define H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ - entry_ptr, was_clean) -#define H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ - entry_ptr) -#define H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) -#define H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) - -#endif /* H5C_DO_SANITY_CHECKS */ - - -#define H5C__INSERT_IN_INDEX(cache_ptr, entry_ptr, fail_val) \ -{ \ - int k; \ - H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ - k = H5C__HASH_FCN((entry_ptr)->addr); \ - if ( ((cache_ptr)->index)[k] == NULL ) \ - { \ - ((cache_ptr)->index)[k] = (entry_ptr); \ - } \ - else \ - { \ - (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ - (entry_ptr)->ht_next->ht_prev = (entry_ptr); \ - ((cache_ptr)->index)[k] = (entry_ptr); \ - } \ - (cache_ptr)->index_len++; \ - (cache_ptr)->index_size += (entry_ptr)->size; \ - if ( (entry_ptr)->is_dirty ) { \ - (cache_ptr)->dirty_index_size += (entry_ptr)->size; \ - } else { \ - (cache_ptr)->clean_index_size += (entry_ptr)->size; \ - } \ - H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) \ -} - -#define H5C__DELETE_FROM_INDEX(cache_ptr, entry_ptr) \ -{ \ - int k; \ - H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) \ - k = H5C__HASH_FCN((entry_ptr)->addr); \ - if ( (entry_ptr)->ht_next ) \ - { \ - (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ - } \ - if ( (entry_ptr)->ht_prev ) \ - { \ - (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ - } \ - if ( ((cache_ptr)->index)[k] == (entry_ptr) ) \ - { \ - ((cache_ptr)->index)[k] = (entry_ptr)->ht_next; \ - } \ - (entry_ptr)->ht_next = NULL; \ - (entry_ptr)->ht_prev = NULL; \ - (cache_ptr)->index_len--; \ - (cache_ptr)->index_size -= (entry_ptr)->size; \ - if ( (entry_ptr)->is_dirty ) { \ - (cache_ptr)->dirty_index_size -= (entry_ptr)->size; \ - } else { \ - (cache_ptr)->clean_index_size -= (entry_ptr)->size; \ - } \ - H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) \ -} - -#define H5C__SEARCH_INDEX(cache_ptr, Addr, entry_ptr, fail_val) \ -{ \ - int k; \ - int depth = 0; \ - H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ - k = H5C__HASH_FCN(Addr); \ - entry_ptr = ((cache_ptr)->index)[k]; \ - while ( ( entry_ptr ) && ( H5F_addr_ne(Addr, (entry_ptr)->addr) ) ) \ - { \ - (entry_ptr) = (entry_ptr)->ht_next; \ - (depth)++; \ - } \ - if ( entry_ptr ) \ - { \ - H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, Addr, k, fail_val) \ - if ( entry_ptr != ((cache_ptr)->index)[k] ) \ - { \ - if ( (entry_ptr)->ht_next ) \ - { \ - (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ - } \ - HDassert( (entry_ptr)->ht_prev != NULL ); \ - (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ - ((cache_ptr)->index)[k]->ht_prev = (entry_ptr); \ - (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ - (entry_ptr)->ht_prev = NULL; \ - ((cache_ptr)->index)[k] = (entry_ptr); \ - H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ - } \ - } \ - H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, (entry_ptr != NULL), depth) \ -} - -#define H5C__SEARCH_INDEX_NO_STATS(cache_ptr, Addr, entry_ptr, fail_val) \ -{ \ - int k; \ - int depth = 0; \ - H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ - k = H5C__HASH_FCN(Addr); \ - entry_ptr = ((cache_ptr)->index)[k]; \ - while ( ( entry_ptr ) && ( H5F_addr_ne(Addr, (entry_ptr)->addr) ) ) \ - { \ - (entry_ptr) = (entry_ptr)->ht_next; \ - (depth)++; \ - } \ - if ( entry_ptr ) \ - { \ - H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, Addr, k, fail_val) \ - if ( entry_ptr != ((cache_ptr)->index)[k] ) \ - { \ - if ( (entry_ptr)->ht_next ) \ - { \ - (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ - } \ - HDassert( (entry_ptr)->ht_prev != NULL ); \ - (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ - ((cache_ptr)->index)[k]->ht_prev = (entry_ptr); \ - (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ - (entry_ptr)->ht_prev = NULL; \ - ((cache_ptr)->index)[k] = (entry_ptr); \ - H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ - } \ - } \ -} - -#define H5C__UPDATE_INDEX_FOR_ENTRY_CLEAN(cache_ptr, entry_ptr) \ -{ \ - H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr); \ - (cache_ptr)->dirty_index_size -= (entry_ptr)->size; \ - (cache_ptr)->clean_index_size += (entry_ptr)->size; \ - H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr); \ -} - -#define H5C__UPDATE_INDEX_FOR_ENTRY_DIRTY(cache_ptr, entry_ptr) \ -{ \ - H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr); \ - (cache_ptr)->clean_index_size -= (entry_ptr)->size; \ - (cache_ptr)->dirty_index_size += (entry_ptr)->size; \ - H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr); \ -} - -#define H5C__UPDATE_INDEX_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size, \ - entry_ptr, was_clean) \ -{ \ - H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ - entry_ptr, was_clean) \ - (cache_ptr)->index_size -= (old_size); \ - (cache_ptr)->index_size += (new_size); \ - if ( was_clean ) { \ - (cache_ptr)->clean_index_size -= (old_size); \ - } else { \ - (cache_ptr)->dirty_index_size -= (old_size); \ - } \ - if ( (entry_ptr)->is_dirty ) { \ - (cache_ptr)->dirty_index_size += (new_size); \ - } else { \ - (cache_ptr)->clean_index_size += (new_size); \ - } \ - H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, entry_ptr) \ -} - - -/************************************************************************** - * - * Skip list insertion and deletion macros: - * - * These used to be functions, but I converted them to macros to avoid some - * function call overhead. - * - **************************************************************************/ - -/*------------------------------------------------------------------------- - * - * Macro: H5C__INSERT_ENTRY_IN_SLIST - * - * Purpose: Insert the specified instance of H5C_cache_entry_t into - * the skip list in the specified instance of H5C_t. Update - * the associated length and size fields. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/10/04 - * - * Modifications: - * - * JRM -- 7/21/04 - * Updated function to set the in_tree flag when inserting - * an entry into the tree. Also modified the function to - * update the tree size and len fields instead of the similar - * index fields. - * - * All of this is part of the modifications to support the - * hash table. - * - * JRM -- 7/27/04 - * Converted the function H5C_insert_entry_in_tree() into - * the macro H5C__INSERT_ENTRY_IN_TREE in the hopes of - * wringing a little more speed out of the cache. - * - * Note that we don't bother to check if the entry is already - * in the tree -- if it is, H5SL_insert() will fail. - * - * QAK -- 11/27/04 - * Switched over to using skip list routines. - * - * JRM -- 6/27/06 - * Added fail_val parameter. - * - * JRM -- 8/25/06 - * Added the H5C_DO_SANITY_CHECKS version of the macro. - * - * This version maintains the slist_len_increase and - * slist_size_increase fields that are used in sanity - * checks in the flush routines. - * - * All this is needed as the fractal heap needs to be - * able to dirty, resize and/or rename entries during the - * flush. - * - *------------------------------------------------------------------------- - */ - -#if H5C_DO_SANITY_CHECKS - -#define H5C__INSERT_ENTRY_IN_SLIST(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( (entry_ptr)->size > 0 ); \ - HDassert( H5F_addr_defined((entry_ptr)->addr) ); \ - HDassert( !((entry_ptr)->in_slist) ); \ - \ - if ( H5SL_insert((cache_ptr)->slist_ptr, entry_ptr, &(entry_ptr)->addr) \ - < 0 ) \ - HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, (fail_val), \ - "Can't insert entry in skip list") \ - \ - (entry_ptr)->in_slist = TRUE; \ - (cache_ptr)->slist_len++; \ - (cache_ptr)->slist_size += (entry_ptr)->size; \ - (cache_ptr)->slist_len_increase++; \ - (cache_ptr)->slist_size_increase += (entry_ptr)->size; \ - \ - HDassert( (cache_ptr)->slist_len > 0 ); \ - HDassert( (cache_ptr)->slist_size > 0 ); \ - \ -} /* H5C__INSERT_ENTRY_IN_SLIST */ - -#else /* H5C_DO_SANITY_CHECKS */ - -#define H5C__INSERT_ENTRY_IN_SLIST(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( (entry_ptr)->size > 0 ); \ - HDassert( H5F_addr_defined((entry_ptr)->addr) ); \ - HDassert( !((entry_ptr)->in_slist) ); \ - \ - if ( H5SL_insert((cache_ptr)->slist_ptr, entry_ptr, &(entry_ptr)->addr) \ - < 0 ) \ - HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, (fail_val), \ - "Can't insert entry in skip list") \ - \ - (entry_ptr)->in_slist = TRUE; \ - (cache_ptr)->slist_len++; \ - (cache_ptr)->slist_size += (entry_ptr)->size; \ - \ - HDassert( (cache_ptr)->slist_len > 0 ); \ - HDassert( (cache_ptr)->slist_size > 0 ); \ - \ -} /* H5C__INSERT_ENTRY_IN_SLIST */ - -#endif /* H5C_DO_SANITY_CHECKS */ - - -/*------------------------------------------------------------------------- - * - * Function: H5C__REMOVE_ENTRY_FROM_SLIST - * - * Purpose: Remove the specified instance of H5C_cache_entry_t from the - * index skip list in the specified instance of H5C_t. Update - * the associated length and size fields. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/10/04 - * - * Modifications: - * - * JRM -- 7/21/04 - * Updated function for the addition of the hash table. - * - * JRM - 7/27/04 - * Converted from the function H5C_remove_entry_from_tree() - * to the macro H5C__REMOVE_ENTRY_FROM_TREE in the hopes of - * wringing a little more performance out of the cache. - * - * QAK -- 11/27/04 - * Switched over to using skip list routines. - * - * JRM -- 3/28/07 - * Updated sanity checks for the new is_read_only and - * ro_ref_count fields in H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#define H5C__REMOVE_ENTRY_FROM_SLIST(cache_ptr, entry_ptr) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - HDassert( (entry_ptr)->in_slist ); \ - HDassert( (cache_ptr)->slist_ptr ); \ - \ - if ( H5SL_remove((cache_ptr)->slist_ptr, &(entry_ptr)->addr) \ - != (entry_ptr) ) \ - \ - HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, \ - "Can't delete entry from skip list.") \ - \ - HDassert( (cache_ptr)->slist_len > 0 ); \ - (cache_ptr)->slist_len--; \ - HDassert( (cache_ptr)->slist_size >= (entry_ptr)->size ); \ - (cache_ptr)->slist_size -= (entry_ptr)->size; \ - (entry_ptr)->in_slist = FALSE; \ -} /* H5C__REMOVE_ENTRY_FROM_SLIST */ - - -/*------------------------------------------------------------------------- - * - * Function: H5C__UPDATE_SLIST_FOR_SIZE_CHANGE - * - * Purpose: Update cache_ptr->slist_size for a change in the size of - * and entry in the slist. - * - * Return: N/A - * - * Programmer: John Mainzer, 9/07/05 - * - * Modifications: - * - * JRM -- 8/27/06 - * Added the H5C_DO_SANITY_CHECKS version of the macro. - * - * This version maintains the slist_size_increase field - * that are used in sanity checks in the flush routines. - * - * All this is needed as the fractal heap needs to be - * able to dirty, resize and/or rename entries during the - * flush. - * - *------------------------------------------------------------------------- - */ - -#if H5C_DO_SANITY_CHECKS - -#define H5C__UPDATE_SLIST_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (old_size) > 0 ); \ - HDassert( (new_size) > 0 ); \ - HDassert( (old_size) <= (cache_ptr)->slist_size ); \ - HDassert( (cache_ptr)->slist_len > 0 ); \ - HDassert( ((cache_ptr)->slist_len > 1) || \ - ( (cache_ptr)->slist_size == (old_size) ) ); \ - \ - (cache_ptr)->slist_size -= (old_size); \ - (cache_ptr)->slist_size += (new_size); \ - \ - (cache_ptr)->slist_size_increase -= (int64_t)(old_size); \ - (cache_ptr)->slist_size_increase += (int64_t)(new_size); \ - \ - HDassert( (new_size) <= (cache_ptr)->slist_size ); \ - HDassert( ( (cache_ptr)->slist_len > 1 ) || \ - ( (cache_ptr)->slist_size == (new_size) ) ); \ -} /* H5C__REMOVE_ENTRY_FROM_SLIST */ - -#else /* H5C_DO_SANITY_CHECKS */ - -#define H5C__UPDATE_SLIST_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (old_size) > 0 ); \ - HDassert( (new_size) > 0 ); \ - HDassert( (old_size) <= (cache_ptr)->slist_size ); \ - HDassert( (cache_ptr)->slist_len > 0 ); \ - HDassert( ((cache_ptr)->slist_len > 1) || \ - ( (cache_ptr)->slist_size == (old_size) ) ); \ - \ - (cache_ptr)->slist_size -= (old_size); \ - (cache_ptr)->slist_size += (new_size); \ - \ - HDassert( (new_size) <= (cache_ptr)->slist_size ); \ - HDassert( ( (cache_ptr)->slist_len > 1 ) || \ - ( (cache_ptr)->slist_size == (new_size) ) ); \ -} /* H5C__REMOVE_ENTRY_FROM_SLIST */ - -#endif /* H5C_DO_SANITY_CHECKS */ - - -/************************************************************************** - * - * Replacement policy update macros: - * - * These used to be functions, but I converted them to macros to avoid some - * function call overhead. - * - **************************************************************************/ - -/*------------------------------------------------------------------------- - * - * Macro: H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS - * - * Purpose: For efficiency, we sometimes change the order of flushes -- - * but doing so can confuse the replacement policy. This - * macro exists to allow us to specify an entry as the - * most recently touched so we can repair any such - * confusion. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the macro - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 10/13/05 - * - * Modifications: - * - * JRM -- 3/20/06 - * Modified macro to ignore pinned entries. Pinned entries - * do not appear in the data structures maintained by the - * replacement policy code, and thus this macro has nothing - * to do if called for such an entry. - * - * JRM -- 3/28/07 - * Added sanity checks using the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the head.\ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* Use the dirty flag to infer whether the entry is on the clean or \ - * dirty LRU list, and remove it. Then insert it at the head of \ - * the same LRU list. \ - * \ - * At least initially, all entries should be clean. That may \ - * change, so we may as well deal with both cases now. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - } else { \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the head \ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_EVICTION - * - * Purpose: Update the replacement policy data structures for an - * eviction of the specified cache entry. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: Non-negative on success/Negative on failure. - * - * Programmer: John Mainzer, 5/10/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_eviction() to the - * macro H5C__UPDATE_RP_FOR_EVICTION in an effort to squeeze - * a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * the pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two version, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 3/20/06 - * Pinned entries can't be evicted, so this entry should never - * be called on a pinned entry. Added assert to verify this. - * - * JRM -- 3/28/07 - * Added sanity checks for the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_EVICTION(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( !((entry_ptr)->is_pinned) ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list. */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* If the entry is clean when it is evicted, it should be on the \ - * clean LRU list, if it was dirty, it should be on the dirty LRU list. \ - * Remove it from the appropriate list according to the value of the \ - * dirty flag. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - } else { \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ -} /* H5C__UPDATE_RP_FOR_EVICTION */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_EVICTION(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( !((entry_ptr)->is_pinned) ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list. */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ -} /* H5C__UPDATE_RP_FOR_EVICTION */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_FLUSH - * - * Purpose: Update the replacement policy data structures for a flush - * of the specified cache entry. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/6/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_flush() to the - * macro H5C__UPDATE_RP_FOR_FLUSH in an effort to squeeze - * a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two versions, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 3/20/06 - * While pinned entries can be flushed, they don't reside in - * the replacement policy data structures when unprotected. - * Thus I modified this macro to do nothing if the entry is - * pinned. - * - * JRM - 3/28/07 - * Added sanity checks based on the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_FLUSH(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the \ - * head. \ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* since the entry is being flushed or cleared, one would think \ - * that it must be dirty -- but that need not be the case. Use the \ - * dirty flag to infer whether the entry is on the clean or dirty \ - * LRU list, and remove it. Then insert it at the head of the \ - * clean LRU list. \ - * \ - * The function presumes that a dirty entry will be either cleared \ - * or flushed shortly, so it is OK if we put a dirty entry on the \ - * clean LRU list. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - } else { \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__UPDATE_RP_FOR_FLUSH */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_FLUSH(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the \ - * head. \ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__UPDATE_RP_FOR_FLUSH */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_INSERTION - * - * Purpose: Update the replacement policy data structures for an - * insertion of the specified cache entry. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/17/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_insertion() to the - * macro H5C__UPDATE_RP_FOR_INSERTION in an effort to squeeze - * a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two version, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 3/10/06 - * This macro should never be called on a pinned entry. - * Inserted an assert to verify this. - * - * JRM - 8/9/06 - * Not any more. We must now allow insertion of pinned - * entries. Updated macro to support this. - * - * JRM - 3/28/07 - * Added sanity checks using the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_INSERTION(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* insert the entry at the head of the clean or dirty LRU list as \ - * appropriate. \ - */ \ - \ - if ( entry_ptr->is_dirty ) { \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - } else { \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ -} - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_INSERTION(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_PROTECT - * - * Purpose: Update the replacement policy data structures for a - * protect of the specified cache entry. - * - * To do this, unlink the specified entry from any data - * structures used by the replacement policy, and add the - * entry to the protected list. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/17/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_protect() to the - * macro H5C__UPDATE_RP_FOR_PROTECT in an effort to squeeze - * a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two version, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 3/17/06 - * Modified macro to attempt to remove pinned entriese from - * the pinned entry list instead of from the data structures - * maintained by the replacement policy. - * - * JRM - 3/28/07 - * Added sanity checks based on the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_PROTECT(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list. */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* Similarly, remove the entry from the clean or dirty LRU list \ - * as appropriate. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - } else { \ - \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ - \ - /* Regardless of the replacement policy, or whether the entry is \ - * pinned, now add the entry to the protected list. \ - */ \ - \ - H5C__DLL_APPEND((entry_ptr), (cache_ptr)->pl_head_ptr, \ - (cache_ptr)->pl_tail_ptr, \ - (cache_ptr)->pl_len, \ - (cache_ptr)->pl_size, (fail_val)) \ -} /* H5C__UPDATE_RP_FOR_PROTECT */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_PROTECT(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list. */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ - \ - /* Regardless of the replacement policy, or whether the entry is \ - * pinned, now add the entry to the protected list. \ - */ \ - \ - H5C__DLL_APPEND((entry_ptr), (cache_ptr)->pl_head_ptr, \ - (cache_ptr)->pl_tail_ptr, \ - (cache_ptr)->pl_len, \ - (cache_ptr)->pl_size, (fail_val)) \ -} /* H5C__UPDATE_RP_FOR_PROTECT */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_RENAME - * - * Purpose: Update the replacement policy data structures for a - * rename of the specified cache entry. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/17/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_rename() to the - * macro H5C__UPDATE_RP_FOR_RENAME in an effort to squeeze - * a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two version, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 6/23/05 - * Added the was_dirty parameter. It is possible that - * the entry was clean when it was renamed -- if so it - * it is in the clean LRU regardless of the current - * value of the is_dirty field. - * - * At present, all renamed entries are forced to be - * dirty. This macro is a bit more general that that, - * to allow it to function correctly should that policy - * be relaxed in the future. - * - * JRM - 3/17/06 - * Modified macro to do nothing if the entry is pinned. - * In this case, the entry is on the pinned entry list, not - * in the replacement policy data structures, so there is - * nothing to be done. - * - * JRM - 3/28/07 - * Added sanity checks using the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_RENAME(cache_ptr, entry_ptr, was_dirty, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the head. \ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* remove the entry from either the clean or dirty LUR list as \ - * indicated by the was_dirty parameter \ - */ \ - if ( was_dirty ) { \ - \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - } else { \ - \ - H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* insert the entry at the head of either the clean or dirty LRU \ - * list as appropriate. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - } else { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__UPDATE_RP_FOR_RENAME */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_RENAME(cache_ptr, entry_ptr, was_dirty, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - if ( ! ((entry_ptr)->is_pinned) ) { \ - \ - /* modified LRU specific code */ \ - \ - /* remove the entry from the LRU list, and re-insert it at the head. \ - */ \ - \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__UPDATE_RP_FOR_RENAME */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_SIZE_CHANGE - * - * Purpose: Update the replacement policy data structures for a - * size change of the specified cache entry. - * - * To do this, determine if the entry is pinned. If it is, - * update the size of the pinned entry list. - * - * If it isn't pinned, the entry must handled by the - * replacement policy. Update the appropriate replacement - * policy data structures. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 8/23/06 - * - * Modifications: - * - * JRM -- 3/28/07 - * Added sanity checks based on the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - HDassert( new_size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, \ - (entry_ptr)->size, \ - (new_size)); \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* Update the size of the LRU list */ \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, \ - (entry_ptr)->size, \ - (new_size)); \ - \ - /* Similarly, update the size of the clean or dirty LRU list as \ - * appropriate. At present, the entry must be clean, but that \ - * could change. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, \ - (entry_ptr)->size, \ - (new_size)); \ - \ - } else { \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, \ - (entry_ptr)->size, \ - (new_size)); \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ - \ -} /* H5C__UPDATE_RP_FOR_SIZE_CHANGE */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->size > 0 ); \ - HDassert( new_size > 0 ); \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, \ - (entry_ptr)->size, \ - (new_size)); \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* Update the size of the LRU list */ \ - \ - H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, \ - (entry_ptr)->size, \ - (new_size)); \ - \ - /* End modified LRU specific code. */ \ - } \ - \ -} /* H5C__UPDATE_RP_FOR_SIZE_CHANGE */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_UNPIN - * - * Purpose: Update the replacement policy data structures for an - * unpin of the specified cache entry. - * - * To do this, unlink the specified entry from the protected - * entry list, and re-insert it in the data structures used - * by the current replacement policy. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the macro - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 3/22/06 - * - * Modifications: - * - * JRM -- 3/28/07 - * Added sanity checks based on the new is_read_only and - * ro_ref_count fields of struct H5C_cache_entry_t. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_UNPIN(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->is_pinned); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* Regardless of the replacement policy, remove the entry from the \ - * pinned entry list. \ - */ \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* Similarly, insert the entry at the head of either the clean or \ - * dirty LRU list as appropriate. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - } else { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - \ -} /* H5C__UPDATE_RP_FOR_UNPIN */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_UNPIN(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( !((entry_ptr)->is_protected) ); \ - HDassert( !((entry_ptr)->is_read_only) ); \ - HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ - HDassert( (entry_ptr)->is_pinned); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* Regardless of the replacement policy, remove the entry from the \ - * pinned entry list. \ - */ \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - \ -} /* H5C__UPDATE_RP_FOR_UNPIN */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - -/*------------------------------------------------------------------------- - * - * Macro: H5C__UPDATE_RP_FOR_UNPROTECT - * - * Purpose: Update the replacement policy data structures for an - * unprotect of the specified cache entry. - * - * To do this, unlink the specified entry from the protected - * list, and re-insert it in the data structures used by the - * current replacement policy. - * - * At present, we only support the modified LRU policy, so - * this function deals with that case unconditionally. If - * we ever support other replacement policies, the function - * should switch on the current policy and act accordingly. - * - * Return: N/A - * - * Programmer: John Mainzer, 5/19/04 - * - * Modifications: - * - * JRM - 7/27/04 - * Converted the function H5C_update_rp_for_unprotect() to - * the macro H5C__UPDATE_RP_FOR_UNPROTECT in an effort to - * squeeze a bit more performance out of the cache. - * - * At least for the first cut, I am leaving the comments and - * white space in the macro. If they cause dificulties with - * pre-processor, I'll have to remove them. - * - * JRM - 7/28/04 - * Split macro into two version, one supporting the clean and - * dirty LRU lists, and the other not. Yet another attempt - * at optimization. - * - * JRM - 3/17/06 - * Modified macro to put pinned entries on the pinned entry - * list instead of inserting them in the data structures - * maintained by the replacement policy. - * - *------------------------------------------------------------------------- - */ - -#if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS - -#define H5C__UPDATE_RP_FOR_UNPROTECT(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( (entry_ptr)->is_protected); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* Regardless of the replacement policy, remove the entry from the \ - * protected list. \ - */ \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pl_head_ptr, \ - (cache_ptr)->pl_tail_ptr, (cache_ptr)->pl_len, \ - (cache_ptr)->pl_size, (fail_val)) \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* Similarly, insert the entry at the head of either the clean or \ - * dirty LRU list as appropriate. \ - */ \ - \ - if ( (entry_ptr)->is_dirty ) { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ - (cache_ptr)->dLRU_tail_ptr, \ - (cache_ptr)->dLRU_list_len, \ - (cache_ptr)->dLRU_list_size, (fail_val)) \ - \ - } else { \ - \ - H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ - (cache_ptr)->cLRU_tail_ptr, \ - (cache_ptr)->cLRU_list_len, \ - (cache_ptr)->cLRU_list_size, (fail_val)) \ - } \ - \ - /* End modified LRU specific code. */ \ - } \ - \ -} /* H5C__UPDATE_RP_FOR_UNPROTECT */ - -#else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - -#define H5C__UPDATE_RP_FOR_UNPROTECT(cache_ptr, entry_ptr, fail_val) \ -{ \ - HDassert( (cache_ptr) ); \ - HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ - HDassert( (entry_ptr) ); \ - HDassert( (entry_ptr)->is_protected); \ - HDassert( (entry_ptr)->size > 0 ); \ - \ - /* Regardless of the replacement policy, remove the entry from the \ - * protected list. \ - */ \ - H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pl_head_ptr, \ - (cache_ptr)->pl_tail_ptr, (cache_ptr)->pl_len, \ - (cache_ptr)->pl_size, (fail_val)) \ - \ - if ( (entry_ptr)->is_pinned ) { \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ - (cache_ptr)->pel_tail_ptr, \ - (cache_ptr)->pel_len, \ - (cache_ptr)->pel_size, (fail_val)) \ - \ - } else { \ - \ - /* modified LRU specific code */ \ - \ - /* insert the entry at the head of the LRU list. */ \ - \ - H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ - (cache_ptr)->LRU_tail_ptr, \ - (cache_ptr)->LRU_list_len, \ - (cache_ptr)->LRU_list_size, (fail_val)) \ - \ - /* End modified LRU specific code. */ \ - } \ -} /* H5C__UPDATE_RP_FOR_UNPROTECT */ - -#endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ - - /* * Private file-scope variables. */ |