diff options
Diffstat (limited to 'src/H5FDcore.c')
-rw-r--r-- | src/H5FDcore.c | 267 |
1 files changed, 163 insertions, 104 deletions
diff --git a/src/H5FDcore.c b/src/H5FDcore.c index f213f42..891c99b 100644 --- a/src/H5FDcore.c +++ b/src/H5FDcore.c @@ -38,8 +38,24 @@ /* The driver identification number, initialized at runtime */ static hid_t H5FD_CORE_g = 0; -/* - * The description of a file belonging to this driver. The `eoa' and `eof' +/* Since Windows doesn't follow the rest of the world when it comes + * to POSIX I/O types, some typedefs and constants are needed to avoid + * making the code messy with #ifdefs. + * NOTE: These are only used when writing data to the backing store on + * file close. + */ +#ifdef H5_HAVE_WIN32_API +typedef unsigned int h5_core_io_t; +typedef int h5_core_io_ret_t; +static int H5_CORE_MAX_IO_BYTES_g = INT_MAX; +#else +/* Unix, everyone else */ +typedef size_t h5_core_io_t; +typedef ssize_t h5_core_io_ret_t; +static size_t H5_CORE_MAX_IO_BYTES_g = SSIZET_MAX; +#endif /* H5_HAVE_WIN32_API */ + +/* The description of a file belonging to this driver. The `eoa' and `eof' * determine the amount of hdf5 address space in use and the high-water mark * of the file (the current size of the underlying memory). */ @@ -54,8 +70,7 @@ typedef struct H5FD_core_t { int fd; /*backing store file descriptor */ /* Information for determining uniqueness of a file with a backing store */ #ifndef H5_HAVE_WIN32_API - /* - * On most systems the combination of device and i-node number uniquely + /* On most systems the combination of device and i-node number uniquely * identify a file. */ dev_t device; /*file device number */ @@ -65,18 +80,26 @@ typedef struct H5FD_core_t { ino_t inode; /*file i-node number */ #endif /*H5_VMS*/ #else - /* - * On H5_HAVE_WIN32_API the low-order word of a unique identifier associated with the - * file and the volume serial number uniquely identify a file. This number - * (which, both? -rpm) may change when the system is restarted or when the - * file is opened. After a process opens a file, the identifier is - * constant until the file is closed. An application can use this - * identifier and the volume serial number to determine whether two - * handles refer to the same file. + /* Files in windows are uniquely identified by the volume serial + * number and the file index (both low and high parts). + * + * There are caveats where these numbers can change, especially + * on FAT file systems. On NTFS, however, a file should keep + * those numbers the same until renamed or deleted (though you + * can use ReplaceFile() on NTFS to keep the numbers the same + * while renaming). + * + * See the MSDN "BY_HANDLE_FILE_INFORMATION Structure" entry for + * more information. + * + * http://msdn.microsoft.com/en-us/library/aa363788(v=VS.85).aspx */ - DWORD fileindexlo; - DWORD fileindexhi; -#endif + DWORD nFileIndexLow; + DWORD nFileIndexHigh; + DWORD dwVolumeSerialNumber; + + HANDLE hFile; /* Native windows file handle */ +#endif /* H5_HAVE_WIN32_API */ hbool_t dirty; /*changes not saved? */ } H5FD_core_t; @@ -89,8 +112,7 @@ typedef struct H5FD_core_fapl_t { /* Allocate memory in multiples of this size by default */ #define H5FD_CORE_INCREMENT 8192 -/* - * These macros check for overflow of various quantities. These macros +/* These macros check for overflow of various quantities. These macros * assume that file_offset_t is signed and haddr_t and size_t are unsigned. * * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' @@ -198,8 +220,6 @@ H5FD_core_init_interface(void) * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * *------------------------------------------------------------------------- */ hid_t @@ -230,8 +250,6 @@ done: * Programmer: Quincey Koziol * Friday, Jan 30, 2004 * - * Modification: - * *--------------------------------------------------------------------------- */ void @@ -258,15 +276,6 @@ H5FD_core_term(void) * Programmer: Robb Matzke * Thursday, February 19, 1998 * - * Modifications: - * Robb Matzke, 1999-10-19 - * Added the BACKING_STORE argument. If set then the entire file - * contents are flushed to a file with the same name as this - * core file. - * - * Raymond Lu, 2001-10-25 - * Changed the file access list to the new generic list. - * *------------------------------------------------------------------------- */ herr_t @@ -305,14 +314,6 @@ done: * Programmer: Robb Matzke * Tuesday, August 10, 1999 * - * Modifications: - * Robb Matzke, 1999-10-19 - * Added the BACKING_STORE argument. - * - * Raymond Lu - * 2001-10-25 - * Changed file access list to the new generic property list. - * *------------------------------------------------------------------------- */ herr_t @@ -355,8 +356,6 @@ done: * Programmer: Robb Matzke * Friday, August 13, 1999 * - * Modifications: - * *------------------------------------------------------------------------- */ static void * @@ -396,13 +395,6 @@ done: * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * Robb Matzke, 1999-10-19 - * The backing store file is created and opened if specified. - * - * Raymond Lu, 2006-11-30 - * Enabled the driver to read an existing file depending on - * the setting of the backing_store and file open flags. *------------------------------------------------------------------------- */ static H5FD_t * @@ -414,7 +406,6 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, H5FD_core_fapl_t *fa=NULL; H5P_genplist_t *plist; /* Property list pointer */ #ifdef H5_HAVE_WIN32_API - HFILE filehandle; struct _BY_HANDLE_FILE_INFORMATION fileinfo; #endif h5_stat_t sb; @@ -458,8 +449,7 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, if(name && *name) file->name = H5MM_xstrdup(name); - /* - * The increment comes from either the file access property list or the + /* The increment comes from either the file access property list or the * default value. But if the file access property list was zero then use * the default value instead. */ @@ -471,10 +461,16 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, if(fd >= 0) { /* Retrieve information for determining uniqueness of file */ #ifdef H5_HAVE_WIN32_API - filehandle = _get_osfhandle(fd); - (void)GetFileInformationByHandle((HANDLE)filehandle, &fileinfo); - file->fileindexhi = fileinfo.nFileIndexHigh; - file->fileindexlo = fileinfo.nFileIndexLow; + file->hFile = (HANDLE)_get_osfhandle(fd); + if(INVALID_HANDLE_VALUE == file->hFile) + HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get Windows file handle") + + if(!GetFileInformationByHandle((HANDLE)file->hFile, &fileinfo)) + HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get Windows file information") + + file->nFileIndexHigh = fileinfo.nFileIndexHigh; + file->nFileIndexLow = fileinfo.nFileIndexLow; + file->dwVolumeSerialNumber = fileinfo.dwVolumeSerialNumber; #else /* H5_HAVE_WIN32_API */ file->device = sb.st_dev; #ifdef H5_VMS @@ -504,9 +500,40 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, /* Set up data structures */ file->eof = size; - /* Read in existing data */ - if(HDread(file->fd, file->mem, size) < 0) - HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to read file") + /* Read in existing data, being careful of interrupted system calls, + * partial results, and the end of the file. + */ + while(size > 0) { + + h5_core_io_t bytes_in = 0; /* # of bytes to read */ + h5_core_io_ret_t bytes_read = -1; /* # of bytes actually read */ + + /* Trying to read more bytes than the return type can handle is + * undefined behavior in POSIX. + */ + if(size > H5_CORE_MAX_IO_BYTES_g) + bytes_in = H5_CORE_MAX_IO_BYTES_g; + else + bytes_in = (h5_core_io_t)size; + + do { + bytes_read = HDread(file->fd, file->mem, bytes_in); + } while(-1 == bytes_read && EINTR == errno); + + if(-1 == bytes_read) { /* error */ + int myerrno = errno; + time_t mytime = HDtime(NULL); + HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); + + HGOTO_ERROR(H5E_IO, H5E_READERROR, NULL, "file read failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', file->mem = %p, size = %lu, offset = %llu", HDctime(&mytime), file->name, file->fd, myerrno, HDstrerror(myerrno), file->mem, (unsigned long)size, (unsigned long long)myoffset); + } /* end if */ + + HDassert(bytes_read >= 0); + HDassert((size_t)bytes_read <= size); + + size -= (size_t)bytes_read; + + } /* end while */ } /* end if */ } /* end if */ @@ -575,13 +602,6 @@ done: * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * Neil Fortner - * Tuesday, March 9, 2010 - * Modified function to compare low level file information if - * a backing store is opened for both files, similar to the - * sec2 file driver. - * *------------------------------------------------------------------------- */ static int @@ -596,11 +616,14 @@ H5FD_core_cmp(const H5FD_t *_f1, const H5FD_t *_f2) if(f1->fd >= 0 && f2->fd >= 0) { /* Compare low level file information for backing store */ #ifdef H5_HAVE_WIN32_API - if (f1->fileindexhi < f2->fileindexhi) HGOTO_DONE(-1) - if (f1->fileindexhi > f2->fileindexhi) HGOTO_DONE(1) + if(f1->dwVolumeSerialNumber < f2->dwVolumeSerialNumber) HGOTO_DONE(-1) + if(f1->dwVolumeSerialNumber > f2->dwVolumeSerialNumber) HGOTO_DONE(1) + + if(f1->nFileIndexHigh < f2->nFileIndexHigh) HGOTO_DONE(-1) + if(f1->nFileIndexHigh > f2->nFileIndexHigh) HGOTO_DONE(1) - if (f1->fileindexlo < f2->fileindexlo) HGOTO_DONE(-1) - if (f1->fileindexlo > f2->fileindexlo) HGOTO_DONE(1) + if(f1->nFileIndexLow < f2->nFileIndexLow) HGOTO_DONE(-1) + if(f1->nFileIndexLow > f2->nFileIndexLow) HGOTO_DONE(1) #else #ifdef H5_DEV_T_IS_SCALAR @@ -699,11 +722,6 @@ H5FD_core_query(const H5FD_t * _file, unsigned long *flags /* out */) * Programmer: Robb Matzke * Monday, August 2, 1999 * - * Modifications: - * Raymond Lu - * 21 Dec. 2006 - * Added the parameter TYPE. It's only used for MULTI driver. - * *------------------------------------------------------------------------- */ static haddr_t @@ -731,11 +749,6 @@ H5FD_core_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type) * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * Raymond Lu - * 21 Dec. 2006 - * Added the parameter TYPE. It's only used for MULTI driver. - * *------------------------------------------------------------------------- */ static herr_t @@ -772,8 +785,6 @@ done: * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * *------------------------------------------------------------------------- */ static haddr_t @@ -797,8 +808,6 @@ H5FD_core_get_eof(const H5FD_t *_file) * Programmer: Raymond Lu * Sept. 16, 2002 * - * Modifications: - * *------------------------------------------------------------------------- */ static herr_t @@ -864,8 +873,6 @@ done: * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * *------------------------------------------------------------------------- */ /* ARGSUSED */ @@ -878,8 +885,8 @@ H5FD_core_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, hadd FUNC_ENTER_NOAPI_NOINIT - assert(file && file->pub.cls); - assert(buf); + HDassert(file && file->pub.cls); + HDassert(buf); /* Check for overflow conditions */ if (HADDR_UNDEF == addr) @@ -931,8 +938,6 @@ done: * Programmer: Robb Matzke * Thursday, July 29, 1999 * - * Modifications: - * *------------------------------------------------------------------------- */ /* ARGSUSED */ @@ -1002,10 +1007,6 @@ done: * Programmer: Robb Matzke * Friday, October 15, 1999 * - * Modifications: - * Raymond Lu, 2006-11-30 - * Added a condition check for backing store flag, for an - * existing file can be opened for read and write now. *------------------------------------------------------------------------- */ /* ARGSUSED */ @@ -1024,19 +1025,40 @@ H5FD_core_flush(H5FD_t *_file, hid_t UNUSED dxpl_id, unsigned UNUSED closing) if (0!=HDlseek(file->fd, (off_t)0, SEEK_SET)) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "error seeking in backing store") + + while (size > 0) { + + h5_core_io_t bytes_in = 0; /* # of bytes to write */ + h5_core_io_ret_t bytes_wrote = -1; /* # of bytes written */ - while (size) { - ssize_t n; - - H5_CHECK_OVERFLOW(size,hsize_t,size_t); - n = HDwrite(file->fd, ptr, (size_t)size); - if (n<0 && EINTR==errno) - continue; - if (n<0) - HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "error writing backing store") - ptr += (size_t)n; - size -= (size_t)n; - } + /* Trying to write more bytes than the return type can handle is + * undefined behavior in POSIX. + */ + if(size > H5_CORE_MAX_IO_BYTES_g) + bytes_in = H5_CORE_MAX_IO_BYTES_g; + else + bytes_in = (h5_core_io_t)size; + + do { + bytes_wrote = HDwrite(file->fd, ptr, bytes_in); + } while(-1 == bytes_wrote && EINTR == errno); + + if(-1 == bytes_wrote) { /* error */ + int myerrno = errno; + time_t mytime = HDtime(NULL); + HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); + + HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "write to backing store failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', ptr = %p, size = %lu, offset = %llu", HDctime(&mytime), file->name, file->fd, myerrno, HDstrerror(myerrno), ptr, (unsigned long)size, (unsigned long long)myoffset); + } /* end if */ + + HDassert(bytes_wrote > 0); + HDassert((size_t)bytes_wrote <= size); + + size -= (size_t)bytes_wrote; + ptr = (unsigned char *)ptr + bytes_wrote; + + } /* end while */ + file->dirty = FALSE; } @@ -1091,6 +1113,43 @@ if(file->eof < new_eof) /* Update backing store, if using it */ if(file->fd >= 0 && file->backing_store) { +#ifdef H5_HAVE_WIN32_API + LARGE_INTEGER li; /* 64-bit (union) integer for SetFilePointer() call */ + DWORD dwPtrLow; /* Low-order pointer bits from SetFilePointer() + * Only used as an error code here. + */ + DWORD dwError; /* DWORD error code from GetLastError() */ + BOOL bError; /* Boolean error flag */ + + /* Windows uses this odd QuadPart union for 32/64-bit portability */ + li.QuadPart = (__int64)file->eoa; + + /* Extend the file to make sure it's large enough. + * + * Since INVALID_SET_FILE_POINTER can technically be a valid return value + * from SetFilePointer(), we also need to check GetLastError(). + */ + dwPtrLow = SetFilePointer(file->hFile, li.LowPart, &li.HighPart, FILE_BEGIN); + if(INVALID_SET_FILE_POINTER == dwPtrLow) { + dwError = GetLastError(); + if(dwError != NO_ERROR ) + HGOTO_ERROR(H5E_FILE, H5E_FILEOPEN, FAIL, "unable to set file pointer") + } + + bError = SetEndOfFile(file->hFile); + if(0 == bError) + HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") +#else /* H5_HAVE_WIN32_API */ +#ifdef H5_VMS + /* Reset seek offset to the beginning of the file, so that the file isn't + * re-extended later. This may happen on Open VMS. */ + if(-1 == HDlseek(file->fd, (HDoff_t)0, SEEK_SET)) + HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") +#endif + if(-1 == HDftruncate(file->fd, (HDoff_t)file->eoa)) + HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") +#endif /* H5_HAVE_WIN32_API */ + #ifdef H5_VMS /* Reset seek offset to the beginning of the file, so that the file isn't * re-extended later. This may happen on Open VMS. */ |